eChapters

English name : Cinnamon
Botanical name : Cinnamomum verum
Family : Lauraceae
Chromosome number : 2n = 24
Centre of origin : Sri Lanka
Cinnamon of the commerce is the dried inner bark of Cinnamomum verum Presl. (Syn. C. zeylanicum Bheme), It is also referred to as sweet wood, true cinnamon, or Ceylon cinnamon. It has been valued for centuries in the orient and is one of India’s oldest known tree spices. Cinnamon is renowned for its aromatic bark and leaves. The bark has a sweet, pleasant taste. It contains moisture (9.9%), protein (4.6%), fat (2.2%), fibre (20.3%), carbohydrates (59.5%), total ash (2.5%), calcium (1.6%), phosphorus (0.05%), iron (0.004%), sodium (0.01%), potassium (0.4%), and vitamins (B1 0.14 mg, B2 0.21 mg, C 39.8 mg, A 175 IU, niacin 1.9 mg), with a caloric value of 355/100g. The oil extracted from the bark is light yellow when freshly distilled, turning reddish upon storage, and is primarily composed of cinnamic aldehyde (60-75%) and eugenol (10%). The leaf oil has a slight camphor scent similar to clove oil, owing to the presence of 70-95% eugenol. Cinnamon is widely used as a spice or condiment in small pieces or as powder.

Introduction
The development of the domestic phenotype mirrors the domestication process. Are certain behavioral patterns typically lost when animal are domesticated? Why do domesticated animals exhibit some behaviors more frequently than their wild counterparts? Darwin (1868) believed that in captivity biological traits are lost through disuse. Hemmer (1990) proposed that domestic animals have experienced a kind of regressive evolution, in which their behavior is less influence by environmental stimuli than that of their wild counterparts. The Earth’s rotation around its axis influences our physiology and behaviour. Animal species that are compelled to be active continuously typically exhibit poor performance, health, and survival. However, we examine the evidence of animals displaying extended periods of activity with weakened or nonexistent circadian rhythms and no observable
negative consequences. Available reports suggested that there is a greater prevalence of around-the-clock and ultradian activity patterns than commonly acknowledged.
This is especially true among herbivores, animals in Polar Regions and constant physical environments, animals in specific life-history stages, and highly social animals. Various mechanisms exist, but research indicates that certain circadian pacemakers still function in animals that are active throughout the day and night. The prevalence of continuous activity in various animals and habitats, along with a wide range of underlying mechanisms, suggests a pattern of convergent evolution. The circadian system’s organizational principles and complexity allow for potential chrono-biological plasticity. There could be compromises between the advantages of consistent daily patterns and adaptability, which, due to reasons that are not well comprehended, result in the functional suitability of irregular daily patterns only in specific environments and for specific ways of life.

Insects, belonging to the phyllum-arthropoda, have an open circulatory system. An open circulatory system is that in which blood bathes the organs rather internal organs directly in the haemocoel, the coelom of the insects, which actually is not a true coelom. Almost entire haemocoel of insects is formed from the epineural sinus. The haemocoel is divided into the perineural sinus and perivisceral sinus by the dorsal and ventral diaphragm respectively. The characteristic of insects is the presence of dorsal vessel, which comprises of anterior aorta and a posterior heart and is the only conducting tube present in insects. The blood of insects mostly does not perform gaseous exchange, therefore it does not contain haemoglobin, and blood in insects is called the haemolymph, which is red-coloured. So in order to study the circulatory system of insects, the major focus must be on the dorsal vessel, which has been described as follows, along with its accessory structures.

Embryologically, the circulatory system is the first organ system to develop in the living animals. The form and function of this system vary considerably among the animals and are shaped by a variety of environmental factors i.e. phenotypic plasticity. Oxygen (O₂) acquisition and carbon dioxide (CO2) elimination occur simultaneously at the gill site of fish and shrimp. The gases are transported around the body by the circulation of the blood.

3.1. Circulatory System of Fishes

In fishes, heart is simply a muscular enlargement and modification of a part of the main blood vessels, lying between the hepatic capillaries and the gills. Fishes have a closed circulatory system with a heart that pumps blood in a single loop throughout the body. From the heart, blood goes to the gill capillary bed. Then via the systemic capillaries it returns back to the heart. Usually the gills account for approximately 30% of the total resistance to blood flow, the rest being in the visceral and somatic vasculature. Tuna requires more O₂ and the gill area is large with gill resistance up to 57%.

The circulatory system includes the heart, blood and lymph vessels, blood, lymph, cerebrospinal and tissue fluids. Circulation of blood in the body is important for the transport of nutrients to all parts of the body and for the transport of gases and waste products. In fact most of the functions of blood could not have been possible, if there were no circulation of blood.

In order to constantly circulate the blood to all parts of the body and back, the body needs the services of an efficient pump. The pump or heart is based on the ability of muscle to contract or shorten. The blood is carried in a system of elastic tubes of pipes (arteries, capillaries and veins). The circulation of blood in the domestic animals or mammals is referred to as closed circulation because the blood returns to the heart without leaving this system of tubes.

The heartbeat frequency or pulse rate is usually given as the number of heart beats per minute. The heart rate increases several times during exercise or thermal stress. The average pulse rate of various domestic animals is given in Table 1.

It may be defined as a chronic condition of the liver in which there is an increase of the connective tissue, a decrease in its size, and a degeneration of the parenchyma.

Alcohol is the most common cause of the cirrhosis of liver. Alcohol reaches the liver through blood stream. Other causes may include improperly prepared foods, poisonous substances, drugs like arsenic, phosphorus, the infectious diseases like syphilis and obstruction of the bile ducts.

Cirrhosis of the liver produced by alcohol abuse is known as portal cirrhosis where as cirrhosis caused by some obstruction such as a stone in the common duct or some narrowing of the bile duct leading from the liver to the small intestine is called as Biliary cirrhosis.

Introduction
The genetic diversity of crops has been subjected to considerable humandriven selection throughout time, in particular, is often limited by conventional plant breeding techniques. Under these conditions, crops with low yields and a high risk of disease and pest infestation may be produced. Thus, there’s a need to introduce a technique where solutions to all the problems can be addressed. CIS breeding opens us a wider range of opportunities for improving crops by enabling the deliberate incorporation of natural genetic differences from closely related plants. The word “CIS” in CIS breeding means “on the same side/same kingdom”. CIS breeding is an advanced method for genetic improvement in which genes from closely related plants are inserted into the desired crop. This method creates crop varieties that are greatly improved in terms of growth capacity, yield potential and pest and disease resistance. CIS breeding is a pioneering technology designed to integrate novel traits into established crop varieties without the introduction of foreign genetic material. Utilizing the similar gene combinations and the plant’s intrinsic genetic systems, it is a natural form of genetic improvement that improves traits including yield, drought resistance, disease resistance and nutritional qualities (Anjanppa and Gruissem, 2021). Comparing to conventional breeding where gene transfer can occur through random cross- breeding or mutagenesis and risk of unintended effects are high, in CIS breeding, one or few genes are transferred from related species as well as risk of unintended effects are also low. Some countries, regulate it as conventional breeding and other regulate it as GMO breeding.

The economics of migration has drawn attention of many economists and social scientists over the years. Decision making in migration has certain inherent complexities as it takes into account the characteristics of both areas of origin and areas of destinations. Similarly it involves the status of agricultural productivity and efficiency, extant of urban informal sector along with various other amenities available in the destination urban areas. The subject of rural-urban migration and its inter-linkage with urban informal market and agricultural productivity have received considerable attention in theoretical framework as well as in empirical research. Among these vast literatures, the study has reviewed some of them and made a synoptic assessment on these issues in general. Moreover an attempt has been made to review the existing literature on rural-urban migration in West Bengal.

2.1 Migration Decision Making

Migration decision can be two types: individual decision making and family decision making. These two sets of migration decision involve distinctly different sets of factors. Stark (1991) has rightly pointed out that “….the family, should not be treated as if it were an individual”. So there are differences between individual migration decision and family migration decision. Migration decision depends on a host of factors, some are economic, some are demographic and some are sociological in nature. However, individual and family migration decisions are determined by two distinctly different sets of factors.

This chapter describes about the review of relevant researches related to the present study. This also helps in developing conceptual framework and selecting proper methodology for the study. Although studies have been conducted on different aspects of conservation agriculture in past, but a few reviews were available on social ecology and perceptional change of the farmers in managing critical inputs to agriculture like water, nutrient and soil organic carbon, and ecosystem as a whole. So, reviews having a little indirect bearings are also included in this section. In accordance with the subject of the proposed study, the review of literature has been presented under the following sub-heads:

In any scientific investigation and research, a comprehensive review of literature is very essential. Its main function, apart from determining the work done before concerning the problem area i.e., area of investigation, to provide an insight into the methods and procedures and create a basis for interpretation of findings. As direct references of all the items are not in abundance, certain specific references along with some indirect references have been incorporated in this chapter for the purpose of meaningful use. In the present study, reviews of literature have been summarized in the following table

Citizen science has emerged as a powerful tool for monitoring and managing pests and diseases in agriculture. The concept of citizen science involves the active participation of citizens in scientific research, often through collaborative efforts with professional scientists. In the context of agriculture, citizen science offers a unique opportunity for farmers, gardeners, and other stakeholders to contribute to the monitoring and management of pests and diseases. Traditionally, pest and disease monitoring and management in agriculture have relied heavily on professional scientists and extension agents. While these experts play a critical role in providing guidance and support to farmers, they often face limitations in terms of resources, capacity, and geographical reach. Citizen science offers a way to bridge these gaps by leveraging the collective knowledge, expertise, and observational power of citizens (Fig.9.1).
In agriculture, citizen science can be applied in various ways to support pest and disease monitoring and management. For example, farmers and gardeners can be trained to recognize and report pests and diseases, providing valuable data on the distribution, prevalence, and impact of these organisms. This information can be used to inform management decisions, such as the application of pesticides or other control measures. Citizen science can also be used to support the development of integrated pest management (IPM) strategies, which aim to minimize the use of chemical pesticides and other harmful practices. By engaging citizens in the

The world of agriculture is undergoing a significant transformation, driven by advances in technology, data analytics, and citizen science. Smart farming, also known as precision agriculture, has emerged as a key driver of this transformation, enabling farmers to optimize crop yields, reduce waste, and promote sustainable agricultural practices. However, the full potential of smart farming can only be realized by integrating it with citizen science and agrometeorological advisories. Citizen science, which involves the participation of citizens in scientific research, has the potential to revolutionize the way we approach agriculture. By engaging citizens in the collection and analysis of data on weather conditions, soil health, and crop health, we can create a more inclusive and effective agricultural system. Agrometeorological advisories, which provide weather-based agricultural advice to farmers, can also be enhanced through the integration of citizen science data (Fig.10.1).
This book chapter explores the potential of bridging the gap between citizen science, smart farming, and agrometeorological advisories. We examine the current state of these fields, highlighting the opportunities and challenges associated with their integration. We also discuss the role of technology, including mobile apps and online platforms, in facilitating this integration and enhancing the effectiveness

Introduction
It was first introduced from Java by National Botanical Research Institute (NBRI), Lucknow in 1959. Later on Regional Research Laboratory (RRL) of CIMAP, Bangalore started research work from 1961. Presently, it is cultivated in Karnataka, Assam, Maharashtra, TN, WB, AP, Southern Gujarat and UP. Citronella oil is produced from two species, viz., Cymbopogon winterianus (Java type) and C. nardus (Ceylon type). About 300-350 tonnes of oil is produced annually in India, as against 7000 tonnes in the world.
Origin
It is reported to be originated from Borneo, Java and Sumatra
Uses
Despite production of synthetic isolates in large scale, there is still a widespread preference for natural citronella oil because of its unique olfactory and stable technical properties, which are vital in blending perfumes and compounding industrially important essences. The oil is mainly used in perfumery, soaps, detergents, industrial polishes, cleaning compounds, mosquito repellent products and other industrial products.

3.1. Origin and distribution

• Originated from Sri Lanka.

• Cultivated throughout tropics.

• Presently maj or producers - China, Vietnam, Indonesia, Argentina, Taiwan, Sri Lanka, Brazil, Madagascar and India.

3.2. Economic importance

• Two types of citronella oil: Java citronella oil obtained from Cymbopogon winterianus which is superior.

• Another is Ceylon citronella oil which is obtained from Cymbopogon nardus inferior type oil.

• Citronella oil - essential oil containing citronellal, geranial and hydroxy citronellal and high value perfumery bases obtained on steam distillation of citronella grass.

• Used for perfuming soaps, detergents, cosmetics, agarbattis and for making mosquito repellent creams.

Scientific name: Cymbopogon spp.
Family: Poaceae
Citronella was first introduced in India in 1959 from Indonesia, specifically from Java Island, which is why it is also known as Java citronella. This fragrant grass, belonging to the Poaceae family, yields essential oils when steam-distilled. The resulting citronella oil (Cymbopogon winterianus Jowitt) is widely used globally in various industries, including flavoring, soap, perfumery, and cosmetics. There are two main types of citronella: Ceylon and Java. The species C. nardus yields Ceylon-type oil, while C. winterianus yields Java-type oil. Java-type oil
is preferred over Ceylon-type oil due to its higher citronellal content, ranging from 30-38% compared to 20-25% in Ceylon-type oil.
Origin and distribution
Citronella originated in tropical Asia, specifically in Indonesia (Java Island) and Sri Lanka. Today, it is cultivated in many tropical and subtropical regions worldwide. In India, citronella is grown in several states, including Maharashtra, Uttar Pradesh, and Madhya Pradesh. It is also cultivated in other parts of Southeast Asia, such as Malaysia, the Philippines, and Thailand. Citronella is also grown in Africa, Central and South America, and the Pacific Islands, where the warm and humid climate provides ideal conditions for its growth.

Introduction

Citrus is one of the most important fruit crops in the world. Citrus fruits are grown in the tropical and subtropical regions of the world. Some of the important countries where these fruits are grown include USA, Brazil, Spain, Israel, South Africa, Australia, China, India, Mexico and Morocco. Citriculture as a garden industry dates back to less than one hundred years. Indian citrus industry is the third fruit industry after mango and banana. The important groups of crops in citrus are sweet oranges, mandarins, limes, lemons, grapefruits and pummelo (Singh, 2001). Total world citrus production is about 115525.2 thousand tonnes, whereas in India, the production of citrus fruits is 8267.2 thousand tonnes (Anonymous 2012). The most important commercial Citrus species grown in India are the mandarin (Citrus reticulata Blanco), followed by sweet orange (Citrus sinensis Osbeck) and acid lime (Citrus aurantifolia Swingle). The main cultivars in the mandarin group are the Nagpur mandarin, Coorg mandarin, Khasi mandarin, Hill mandarin and the Kinnow mandarin. Maharashtra, Karnataka, Andhra Pradesh and Punjab are the major citrus producing states, while in Haryana, Uttar Pradesh, Madhya Pradesh, West Bengal, Tamil Nadu, Gujarat and Bihar, the fruit is grown to a limited extent. In Rajasthan new plantation of citrus are coming up very well and the main cultivars are Nagpur and Kinnow mandarins.

1. Gummosis.
Diagnosic Symptoms
• First symptoms are dark staining of bark which progresses into the wood.
• Bark at the base is destroyed resulting in girdling and finally death of the tree.
• Bark in such parts dries, shrinks and cracks and shreds in lengthwise vertical strips.
• Later profuse exudation of gum from the bark of the trunk (characteristic symptom).
• The infection spreads both upward to the leaves and even fruits and downward to the roots causing fibrous root rot.
• The fibrous root rot destroys a major portion of the root system.
• However, the trunck and root infections may usually result in ultimate drying of the tree (Fig-1).
Etiology
Scientific Classification
Kingdom : Fungi
Division : Eumycota

Cultivation of citrus holds promise in arid irrigated tracts. The major citrus fruits under cultivation in arid regions are acid lime , lemon, Kinnow, Mandarin hybrid, sweet orange and grapefruit .Acid lime and kinnow are widely grown. Citrus fruit are grown  through out country for its  nutritive and medicinal value (Chadha, 2001) . Citrus is world’s leading fruit crop. In India, it is cultivated in the states of Maharashtra, A.P., Punjab, Rajasthan, H.P., U.P., M.P., Karnataka, T.N., J&K., Odisha, Gujarat, Assam, & Sikkim, For obtaining quality plant material, propagation is an important aspect. Citrus is largely propagated   by budding except kagzi lime which is raised from seeds because of occurrence of polyembryony and sweet lime which is  commercially  propagated by stem cuttings. Kagzi lime and lemon can also be propagated by layering. In case of citrus the availability of proper plant material is very much essential.

SUMMARY

Citrus is third most important fruit crop in India after banana and mango. Citrus crops have occupied an area of 8.43 lakh ha with total production of 75.7 lakh tons and the productivity of 9.9 tons/ha in India. Such a quantum of citrus production contributes 13 per cent of total fruit production demonstrating the significance of citrus in horticultural research and development in India. Rootstocks are known to have profound effect on the vigour, precocity, productivity, internal quality, and longevity of the scion varieties grafted on them. They are also known to influence the susceptibility of trees to various diseases and insects. Furthermore, it is recognized that optimum performances depends on the proper selection of rootstocks for a given set of growing conditions. The most commonly and widely used citrus rootstocks in India are Rough lemon, Cleopatra and Pectinifera. Rough lemon (Jatti Khatti) is the most important and widely used rootstock in the country for most of the scions followed by Kharna Khatta being more popular in Uttar Pradesh. While the problem of rootstock selection is important in all major fruit crops, it is of even greater importance in citrus due to tristeza virus disease now present in many areas of the world. It is also possible that citrus decline in India may be due partly to stionic incompatibilities. This chapter deals with problems and prospects of rootstocks in citrus in India, particularly related to horticultural aspects, insect-pests, diseases, nematodes, physiological disorders, post harvest quality, aspects related to tissue culture and rootstock breeding.

The research work carried out throughout citrus growing countries of the world including India showed utility of different rootstocks for citrus plants, which varies greatly with scion variety and agro-climatic condition. A wide range of citrus rootstocks are available, each having desirable attributes. The success of a rootstock is determined by its tolerance to prevailing conditions of soil, climate and diseases. Citrus plants are unusual in that many species and cultivars including the commercial rootstocks reproduce true to type from seed. Commercial citrus rootstocks are usually highly polyembryonic but there can be 1-40 zygotic seedlings in the seedbed.

Citrus fruits are originated in the tropical and sub tropical regions of South East Asia, particularly in India and China. North East India is the native place of many citrus species. Citrus fruit has been cultivated in an ever-widening area since ancient times. Although oranges are the major fruit in the citrus fruits accounting for about 70 per cent of citrus output, the group also includes small citrus fruits (such as tangerines, mandarins, clementines and satsumas), lemons, limes and grapefruits. Citrus fruits are consumed as fresh fruit or utilized for preparing processed citrus products. Approximately one third of total citrus production is utilized for processing. India ranks sixth in the production of citrus fruits in the world. In India, it is primarily grown in Maharashtra, Andhra Pradesh, Punjab, Karnataka, Uttaranchal, Bihar, Orissa, Assam and Gujarat. Citrus fruits have several beneficial health and nutritive properties. They are rich in Vitamin C and folic acid, as well as a good source of fiber. In addition they contain potassium, calcium, folate, thiamine, niacin, vitamin B6, phosphorus, magnesium and copper.

Citrus butterfly: Papilio demoleus, P. polytes : Papilionidae

The pest is distributed all over the world and has a host range that includes citrus and other rutaceae plants like Aegle marmelos. Adult has the head and thorax black with a creamy-yellow coloration on the underside of the abdomen. Wings are dull black, orna-mented with yellow markings and a distinct red patch on the hind wing. The underside is orange and yellow coloured and can be seen when it flirts for honey collection or just before egg laying. The Antenna is black and clubbed.

Genus : Citrus
Species : Sinensis aurantium, limon, medica grandis L. paradisi Macf. reticulata Blanco
Family : Rutaceae
Chromosome No. : 2n = 18

Citrus is one of the most important and popular fruit of the world which is widely cultivated in almost all of the tropical and subtropical parts of the world. Amongst the subtropical fruits in respect of average it occupies the third position. In India too it is next to mango and banana in commercial perpective. Citrus fruits on account of extensive adaptability are successfully cultivated in tropical, subtropical and even in the marginal temperate regions where the condition are somewhat favourable with its attractive appearance (foliage) distinct flavour and above all its excellent fruit quantity, citrus is liked by one and all. Fruits are not only refreshing and delicious but are also very rich in vitamin C and is good source of A and B, with fruit sugar acids, minerals like Ca, P, Fe. They are essential and play significant role in health promoting constituents in human diet, significance of citrus fruits in diet is very well established. Limes and lemons

Origin and history: Citrus is the leading fruit crop in the world. In India, citrus ranks second in area sharing 12.8% of the total area under fruit crops with 9.6% share in production. Under citrus group, mandarins are the most important, occupying 50% of the total area under citrus followed by sweet orange and limes. Citrus fruits are grown mainly in Maharashtra, Andhra Pradesh, Punjab, Karnataka and North-Eastern region. 

1.    Nagpur mandarin was introduced in India in 1894 by Shriji Raja Bhosle. 

2.    Kinnow can be grown in high density planting by using the cultivar  Troyer Citrange'  as a root stock by spacing the plants at 1.8 x 1.8 m2. 

3.    Classification of citrus was given by Tanaka and Swingle. 

4.    Grape fruit is also known as Forbidden fruit, Breakfast food.

Genus Citrus (Citrus spp.) belongs to family Rutaceae and subfamily Aurantioedae. Citrus fruits are cultivated over a wide range of agroclimatic conditions because of their ability to adapt to different situations. Citrus is considered to be one of the most remunerative fruit crops in India, having a lasting niche in the international trade and world finance. Most of the Citrus species are believed to be native to tropical and subtropical regions of southeast Asia, particularly, northeastern India and the region between China and India (Ghosh, 2007). Trees belonging to genus Citrus are comparatively small in size (other perennial fruit crops) and evergreen in nature that are grown in tropical, subtropical and even mild temperate climates. Citrus fruits are nonclimacteric so they do not ripen further once removed from the trees. So it is important that they are picked at the right stage of maturity.

Citrus is one of the most important fruit crops of the world. The most important commercial citrus fruits in India is mandarin oranges followed by sweet oranges, lemons and acid limes. Citrus fruits are used for fresh fruit juices, processing into squashes, marmalades and its essential oils from peel are widely used in flavouring, perfumery and cosmetic industry. The citrus peel is one of the important sources for manufacture of pectin.

It is believed that most of the species under the genus citrus are native to tropical and subtropical regions of South-East Asia, particularly India, China and in the region between these two countries. The north-eastern region of India is considered as one of the natural homes for few species of citrus. The other major citrus producing countries of the world are Brazil, USA, India, China,Mexico, Spain, Egypt, Italy, Indonesia and Trukey.

Sweet Orange (Cirus sinensis Osbeck) or Mosambi

Sweet orange is one of the most widely favored citrus fruit of of the world. Its scientific name is Citurs sinensis Osbeck. The sweet oranges are generally round to oval in shape; tight skinned with solid central core. The skin is yellow to orange in colour, smooth and pulp is yellow to orange or reddish. The segments are tightly attached to one another. The commercially important varieties are Malta (Blood Red), Mosambi and Satgudi. Other exotic varieties like Valencia, Washington Navel of USA and Shamouti of Isreal.

Citrus is a major fruit crop grown all over the tropical and subtropical region of the world. Maximum citrus species are native of tropical and subtropical regions of South East Asia specially India, China in the area between these two countries. It is mainly cultivated in China, Brazil, India, USA, Mexico, Spain and Egypt in the world. China is the leading producer country in the world followed by Brazil, India and USA. India is the third largest citrus producer which has 4.8 per cent of the world’s total citrus production.

Citrus crop includes lime, lemon, sweet orange, mandarin orange, Kamala orange, grapefruit, malta and pomelo etc. The disease which attacks one species of citrus mostly attacks other species also.

Subtropical and Tropical Fruits

Most of the area of India experience subtropical and tropical climate. Subtropical and tropical fruits contribute maximum to the overall fruit production. Major fruit crops cultivated in subtropical and tropical region are citrus, mango, litchi, guava, sapota, pomegranate, banana, ber, sapota, grapevine, papaya etc. Various pests affect the fruit production by infesting at various stages of the tree growth quantitatively as well as qualitatively. The pests of these crops are described fruit wise.

Citrus

Most of the area of our country is tropical and subtropical, where the citrus, Citrus spp. cultivation is practiced and main citrus growing areas are in Maharashtra, Andhra Pradesh, Punjab, Karnataka, Uttarakhand, Bihar, Orissa, Assam and Gujarat. As for as the ranking in the world

The prime objective of any plant breeder is to develop high yielding varieties and make the quantity of quality seed of those varieties to farmers for commercial cultivation to realize the benefits of superior varieties. This necessitates, the production of seed of improved varieties in large scale in order to make them available to farmers without losing their genetic purity. Seed production is a continuous process. The seed of improved varieties are produced in several stages, each class producing a special class of seed. The various classes of improved seeds are recognized in order to facilitate seed production and to ensure continuous supply of quality seed. A seed production programme for the production of quality seed has different classes of seeds viz; nucleus seed, breeder seed, foundation seed, registered seed and certified seed. The Association of Official Seed Certifying Agencies (AOSCA) has defined these seed classes as follows:

1. Nucleus Seed

Basic or nucleus seed is the original seed of a released and notified variety. Nucleus seed is multiplied by single plant progeny system, using the concept of maintenance breeding, where purity of the original parental stock is maintained. It is available in very limited quantities and taken from the individual plant of a variety for purification. It is directly under the controlled of concerned crop breeder. This seed has hundred percent genetic and physical purity. Breeder seed is multiplied out of this material and about 500-1000 plants are kept for continued multiplication of nucleus seed.There is no need of any type of tag on nucleus seed but concerned breeder issue a certificate for purity.

3.1 Introduction

Genetics deals with genes and cytogenetics with chromosomes that harbour genes. On the other hand, plant breeding strives to upgrade the genotypes of crop plants. So, the plant breeding methods should be based on genetic principles. Dear students, you should have clear understanding of genetics in broad sense so that you can appreciate the applicability of breeding methods. As I have already pointed out that you have been taught the course ‘Principles of Genetics and Cytogenetics’ in the first semester, only a brief discussion is followed for your review and better understanding.

3.2 Character

When we call ‘character’ or ‘trait’ in genetics, we mean any morphological, anatomical, biochemical or behavioural feature of an organism. For instance, flower colour, blooming period, leaf size, size of guard cells in stomata, vitamin C content, disease resistance etc. A single gene or a number of genes may govern the development of a character and, often it is influenced by the environment. Characters may be qualitative or quantitative.

6.1 Introduction

Plant breeding is the indispensible component of elevating production and productivity of spices by evolving high yielding and/or with good quality type. Thereby, the practice of identification and selection of desirable traits and introgression of those characters in a single plant is being done since the beginning of organized agricultural activities by humankind. The act of plant breeding was reshaped and got a momentum with a scientific basis after the discovery and rather rediscovery of Mendel’s laws. Worldwide, humankind could enjoy the direct benefits of methodical plant breeding during green revolution. Manipulation of genetic architecture for creating variation in the population and successive selection is the basic of all kinds of crop breeding. But the process of creation of variability and selection differs from crop to crop depending on their mode of reproduction. It is comparatively easier to get a new homogeneous population in self pollinating plants. Therefore, segregating generations are handled differently in these two categories of self and cross pollinated crops.

4.1. Agricultural production economics

An applied science, wherein principles of choice are applied to use of land, labour, capital and management in farming.

Explains conditions under which profit and output can be maximized and cost and use of physical inputs can be minimized.

Synonyms : Hog eholera, European swine fever

It is an acute highly infectious viral septicaemia of swine of all ages characterized by rapid and sudden onset, high morbidity and mortality and generalized  haemorrhages. A chronic course  followed by recovery after treatment has been reported in older pigs and appearance of new born pigs with congenital defects.

Etiology : The etiological agent causing hog cholera is a linear  single stranded positive sense RNA virus under the genus Pestivirus and family Flaviviridae. The virions are spherical, 40-50 nm in diameter  and consist of a tightly adherent lipid bilayer envelope covered with glycoprotein peplomers surrounding an icosahedral capsid of 28-35 nm in diameter. The genome is 12 kb in length with 5’end capped but  3’end  not  polyadenylated. The genes for structural proteins are located at 5’ end of genome. The virus replicates in the cytoplasm and matures within cytoplasmic vesicles. Though there is only one antigenic type of the virus, a number of strains of variable virulence and antigenicity has been reported. The causative agent was first thought to be a gram negative bacterium named Salmonella cholera suis. Later, it was confirmed that the disease is caused by a  virus.

History on Classification of Herbicides

Copper sulphate (CuSO₄) was the earliest inorganic salt used as selective herbicide for controlling dicot weeds in cereal crops during 1896 in France, Germany, and USA. Sulphuric acid (H₂SO₄) was used as herbicide in cereals during 1909. In selective killing action depends on the fact that it runs off the leaves of the cereals and scorches rough surfaces of certain seeds. Sodium chlorate (NaClO₃) under the name mort-herbs is used in France for killing deep rooted perennials. Another non-selective herbicide, ammonium sulphamate (NH₄SO₃NH₂) was introduced in 1945 as ammate for the control of woody plants. Organic herbicides are more effective and selective.

Classification of Herbicides

Classification of herbicides is modified periodically as and when new herbicides are developed. Herbicides are classiûed based on their method of use (soil and foliage applied), mode of action (systemic or translocated and non-systemic or contact herbicide) and chemical key structure (aliphatic-aromatic, dinitrophenal, etc. Some herbicide molecules contain more than one classifying key structure and they are put into the group most likely to be contributing activity.

Any approved herbicide is known by three names: common name, chemical name and trade name. Common name of herbicide is a technically accepted abbreviation of its chemical name. Chemical name reads out its full molecular structure. Trade names refer to their formulations offered by the chemical companies for the consumers.

The modern breeds of chicken have known to be descended from the wild jungle fowl. India, Nepal, Bangladesh, Myanmar, Thailand, Sri Lanka and Malaysia are the homeland to these jungle fowls. There are four known species of jungle fowl viz. Gallus gallus (Red jungle fowl), Gallus lafayetti (Ceylon jungle fowl), Gallus sonnerati (Grey jungle fowl) and Gallus varius (Java jungle fowl). The domestic breeds of chicken/fowl have originated from Gallus gallus.

Introduction
A biogas plant is an engineered system designed to generate biogas through the anaerobic digestion of organic materials rich in cellulose, such as cow dung, agricultural residues, poultry waste, and other biodegradable biomass. In the absence of oxygen, microorganisms decompose these materials, producing a mixture of methane (CH4), carbon dioxide (CO2), and traces of hydrogen sulfide (H2S). This biogas can be utilized as a renewable energy source for cooking, heating, and power generation.
In India, cow dung has traditionally served as the primary substrate, and such systems were popularly known as Gobar Gas Plants. The early designs were promoted by the Khadi and Village Industries Commission (KVIC)
Components of a Biogas Plants
A typical biogas plant consists of the following major components:
• Foundation: Provides structural support to the digester and gas holder.
• Digester (Fermentation Tank): The main chamber where anaerobic digestion occurs.
• Gas Holder (Masonry Dome or Drum): Collects and stores the biogas produced.
• Mixing Tank: Used to prepare the slurry by mixing feedstock with water (commonly 1:1 ratio).
• Inlet Chamber/Pipe: Feeds the prepared slurry into the digester

CMTs can be classified on the basis of morphologic features, tissue of origin (epithelial, myoepithelial or mesenchymal tissue) or prognosis. The World Health Organization (WHO) classification of canine and feline mammary tumors has categorized CMT into three major categories i) malignant, ii) benign and iii) unclassified tumors. On the basis of histological characteristics, the mammary tumors have been classified into fibroadenomas, adenomas, solid carcinomas (with transformed epithelial cells), tubular adenocarcinomas (with tubule like arrangements), papillary adenocarcinomas (having papillary like projections), anaplastic carcinomas (with highly pleomorphic cells), sarcomas (involvement of connective tissue) and malignant tumors (Fig. 2). Fibroadenomas and adenomas are the types of benign mammary tumors the former contains some connective tissues component in between, and carcinomas, adenocarcinomas and sarcomas come under malignant tumors.

Classifications and Nomenclature

Plants can be classified according to the following criteria: (1) botanical, (2) descriptive and (3) agricultural. Botanical classification is based on the morphological characteristics of plants as well as on their anatomy, physiology and DNA sequences. Descriptive classification is based on the environmental adaptation, growth habit and other observable features. In agriculture, plants can be broadly classified as either useful or useless. Those which are useful are called crops while those which are not useful are called weeds.

A common, well-defined system of crop classification is important in crop science and agriculture. Grouping of plants following established systems will simplify plant collection initiatives, research and breeding specialized development efforts. Having standardized botanical names will also facilitate efficient communication, dissemination and retrieval of scientific information. Additionally, the grouping of crops will indicate that these crops may have similar uses, adaptation, growth habits and methods of culture. Classifying crops by family is likewise important in intergeneric grafting. To students of crop science, a list of crops under the various agricultural classifications will be a useful reference in crop names and identification and as a review guide. To the farm manager himself, the same list will offer innumerable benefits in finding alternative crops for specific uses.

Despite these advantages, however, classifications of crops in agriculture vary from place to place and from one country to another due to differences in the primary usage of certain crops, intensity of care, extent of cultivation and other criteria under consideration. It is not uncommon to find crops having two or more classifications, used simultaneously, alternatively or sequentially. FAO(2010) in its report entitled “Crops Statistics - Concepts, Definitions and Classifications”, expressed its difficulty in the collection and presentation of statistical data due to differences in the concepts, definitions, coverage and classifications” of crops which are grown in different countries.

Taxonomy (biological systematics) is the branch of science which deals with classification of units or individuals on the basis of similarities and differences. The classification, nomenclature, and identification are three interrelated components of bacterial taxonomy (Cowan, 1965).

Classification: Classification is the arrangement of bacteria into groups (taxa) based on the similarities of certain characteristics. Presently 11,000 bacterial species is classified. At the current rate of 600 bacterial species / year it is estimated to take 1000 years to classify all the bacteria!

Nomenclature: It is the assignment of specific names to the taxonomic groups following the regulations mentioned in ‘International Code of Nomenclature of Bacteria’ (Euzeby, 1997). International committee on systematic bacteriology (International committee on systematics of prokaryotes, ICSP) standardizes the code. The committee is helped by a number of taxonomic subcommittees on different groups of bacteria. The Code can be amended by the Judicial Commission. The Code contains general considerations, principles, rules and recommendations on the naming of prokaryotes (bacteria) up to the rank of ‘Class’.

Classification of Organisms
Over the years, scientists have developed several systems for the classification of organisms. Greek phlosopher Aristotle (384-322 BC) grouped life forms as either plants or animals. Microscopic organisms were unknown at that time. Fungi were included in plants. Aristotle’s system distinguished only between plants and animals on the basis of movement, feeding mechanism, and growth patterns. In 1735, Carolus Linnaeus formalized the use of two Latin names to identify each organism, a system called Binomial nomenclature. He grouped closely related organisms and introduced the modern classification groups: kingdom, phylum, class, order, family, genus, and species. At that time singlecelled organisms were observed but not classified. This classification had two kingdoms.
Plantae: containing Plants and Fungi
Animalia: containing Animals
In 1866, Ernst Haeckel proposed a third kingdom- Protista, to include all single-celled organisms like amoebas and diatoms. Some taxonomists also placed simple multicellular organisms, such as seaweeds, in Kingdom Protista.
In 1938, Herbert Copeland proposed a fourth kingdom, Monera, to include only bacteria. This was the first classification proposal to separate prokaryotes from eukaryotes, at the kingdom level.
In 1957, Robert H. Whittaker proposed a fifth kingdom –Fungi.Fungi do not ingest food as animals do, nor do they make their own food, as plants do. They secrete digestive enzymes around their food, breaking it down before absorbing it into their cells.

Abstract

Classification of the hundreds of possible dryers is essential to the logical selection of appropriate dryer for a given application. Diverse criteria for classification as well as selection of dryers are presented and discussed briefly. The advantages and limitations of different dryer types must be taken into consideration. Initial capital cost is often the key deciding criterion in industrial dryer selection. This is not a good strategy as the user must pay for the operating costs over a long period of life of the dryer. In general several different dryer types are suitable for a given product. Careful selection is essential for cost-effective operation of the dryer.

2.1 What is a frequency distribution?

A frequency distribution shows the frequencies of occurrence of the observations in a data set. Often the distribution of the observed data is called an empirical frequency distribution, in contrast to the theoretical probability distribution determined from a mathematical model.

The class interval is a term used in statistics when we are given a continuous series. Class means a group of numbers in which items are placed such as 0-10, 10-20, 20-30, etc. Class interval refers to the numerical width of any class in a particular distribution.

2.2 Relative frequency distributions

Although creating a frequency distribution is a useful way of describing a set of observations, it is difficult to compare two or more frequency distributions if the total number of observations in each distribution is different. A way of overcoming this difficulty is to calculate the proportion or percentage of observations in each class or category. These are called relative frequencies and each is obtained by dividing the frequency for that category by the total number of observations (column 3 of Table 2.1). The sum of the relative frequencies of all the categories is unity (or 100%) apart from rounding errors.

1.1 Classification

The raw or ungrouped data are in unorganized form and need be organized in meaningful and readily comprehensible form in order to facilitate further statistical analysis. Classification of data is the first step in this direction. It is the process of arranging thing in groups according to their resemblance and affinities. There are two basic types of classification namely-qualitative and quantitative. In qualitative classification, the basis of classification is some attribute or quality like: sex, literacy, religion, etc. A qualitative classification may be simple or manifold. The classification done with respect to one attribute is termed as ‘Simple Classification’. The classification in which two or more attributes are considered and several classes are formed is called ‘Manifold Classification’. In quantitative classification, the collected data are grouped in respect of characteristics, which can be measured and numerically expressed such as height, weight, etc.

Statistical Series: When observations of any characteristic present in the individual of a group are recorded and arranged one after the other in a systematic order, they form a series, known as statistical series. For example: milk yield of 20 cows, height of the students in a class in a systematic order, etc. These are some important types of series:

• Discrete series: In this series, observations can take up only exact values and not any fractional values, is called discrete series. That means, this type of series has whole number of counting. For example: number of the students in a class, members of a family, number of births in a certain year, etc

• Continuous series: A series which can take up any numerical value (integral/ fractional) within a certain range is called continuous series. For example: milk yield of 20 cows, height, weight, temperature, etc.

• Array series: When we arranged the observations of a series either in ascending order of their magnitude or descending order of their magnitude, then it becomes an array series.

• Spatial series: When items of a series are given according to space or place or time, then such type of series is known as spatial series. For example: month wise milk yield of a herd of cows, month wise income or expenditure of an industry, population of a country according to states, etc.

In broad perspective, plants and crops of agriculture can be classified mainly based on three criterions namely descriptive, ecological and agronomical. Understanding these basic classifications will help us to study the characteristics of each plant in detail.

Descriptive Classification

In descriptive approach, plants and crops can be classified based on the mode of reproduction, mode of pollination, life span, growth habits and leaf retention property. Sexual and asexual reproducing plants are the two groups based on the mode of reproduction. The sexual reproducing plants are developed from a seed after the union of male and female gametes and asexual plants reproduces through vegetative means and not by male and female gametes.

It is vital to categorise agroforestry and its many systems in accordance with certain contemporary standards in order to have a thorough grasp of them and to enable future progress. Since each agroforestry system refers to a different set of agroforestry practices involving agriculture (crops), forestry (trees), and pasture (animals), the various uses of land are combined either temporally or spatially. Each agroforestry system has its own unique arrangement of various components, such as crops, animals, perennial trees, etc., and degree of interaction between the components. In terms of structure, composition, age intensity, technology, inputs, etc., one system varies from the other.

Creating a useful framework for the synthesis and analysis of data on current systems as well as the creation of new, promising ones should be the primary goal of classification. For this reason, every categorization system needs to have the accompanying the following standards.

Though more than 1500 species contain volatile aromatic principles, only around 50 species serve as commercial source of essential oil and aroma-chemicals. Among these, aromatic crops under large-scale cultivation hardly exceeds two dozens. Important aromatic plants of world are classified according to economic part used, growth habit, habitat, crop duration and propagation method besides usual botanical classification.

"Bacteria” = Plural form, “Bacterium” = Singular form

Bacterium is a single-celled microorganism that do not have cell organelles (mitochondria, endoplasmic reticulum, chloroplast etc.) or a true nucleus. Bacteria are microscopic, unicellular organism that belongs to the kingdom prokaryotes.

Morphology of Bacteria

Bacterial morphology deals with size, shape, and arrangement of bacterial cells.

Size of Bacteria

Bacteria are microscopic organisms that are less than 3 micrometeres (μm) in size. Size of cocci range from 0.5 to 3 μm, and the size of a rod shaped bacteria range from 0.15 to 2 μm (width) to 0.5 to 20 μm (length).