eChapters

A. Definitions of probability

1. A probability relies on having an understanding of the theoretical model defining the set of all possible outcomes of a trial; we evaluate the probability solely on the basis of this model, without recourse to performing the experiment at all. It is often called an a priori probability. So, for example, we know that there are two equally likely outcomes when an unbiased coin is tossed: either a head or a tail. This is the model from which we can deduce that the probability of a defined event, obtaining a head, say, is 1/2 = 0.5.

2. The next approach to defining a probability, and the one commonly used in statistical inference, is to regard a probability as the proportion of times a particular outcome (the event) will occur in a very large number of ‘trials’ or ‘experiments’ performed under similar conditions.

The result of any one trial should be independent of the result of any other trial, so whether or not the event occurs in any one trial should not affect whether or not the event occurs in any other trial.

Correlation coefficient

We measure the degree of association between two variables by calculating Pearson’s product moment correlation coefficient, usually just called the correlation coefficient.

It was developed by Karl Pearson from a related idea introduced by Francis Galton in the 1880s, and for which the mathematical formula was derived and published by Auguste Bravais in 1844. In 1896, Karl Pearson published his first rigorous treatment of correlation and regression in the Philosophical Transactions of the Royal Society of London.

The linear correlation coefficient (sometimes called Pearson's Correlation Coefficient), commonly denoted, is a measure of the strength of the linear relationship between two variables.

• We say that we have perfect correlation if all the points lie on the line; in this case, the value of the correlation coefficient takes one of its extreme values, either +1 or −1 (Figure 7a and 7b).

• We have positive correlation if the sign of the correlation coefficient is positive; then there is a direct relationship between the two variables so that as one variable increases in value, the other variable increases (Figure 7a) or there is a tendency for it to do so.

• We have negative correlation if the sign of the correlation coefficient is negative; then there is an inverse relationship between the two variables so that as one variable increases in value, the other variable decreases (Figure 7b) or there is a tendency for it to do so.

• We have no linear association (i.e. the variables are uncorrelated) if the correlation coefficient is zero; then there is a random scatter of points with no indication of a linear relation between the variables (Figure 7c.). Note that a non-linear relationship between the variables can also give a correlation coefficient of zero.

Moments

In statistics, moments are measures of the shape and variability of a data set. They are used to describe the location and dispersion of the data. There are several types of moments that can be calculated, each providing different information about the data set.

Moments is a term which refers to a measure of force with respect to its tendency which provides rotation. The strength of the tendency depends upon the amount of force and distance from the point of origin where force is exerted.

So total moments of all the forces about origin, if total moment is divided by the total force, which is called moment actually arithmetic mean for frequency distribution.

Hence, arithmetic mean is called first moment about the origin

• Arithmetic mean of various powers expressed as deviation from mean in any distribution is called the moment of the distribution.

What is dispersion?

In statistics, dispersion (also called variability, scatter, or spread) is the extent to which a distribution is stretched or squeezed. Common examples of measures of statistical dispersion are the variance, standard deviation, and interquartile range. For instance, when the variance of data in a set is large, the data is widely scattered. On the other hand, when the variance is small, the data in the set is clustered.

Dispersion is contrasted with location or central tendency, and together they are the most used properties of distributions.

Measure of dispersion

(a) Range

The range is defined as the difference between the largest and smallest observations. Range(X)= Max(X)- Min (X)

Example

The range in statistics for a given data set is the difference between the highest and lowest values. For example, if the given data set is {2,5,8,10,3}, then the range will be 10 – 2 = 8. Thus, the range could also be defined as the difference between the highest observation and lowest observation.

The central tendency measure is defined as the number used to represent the center or middle of a set of data values. The three commonly used measures of central tendency are the mean, median, and mode.

Measures of location (averages)

The term average refers to any one of several measures of the central tendency of a data set.

• The mean has the disadvantage that its value is influenced by outliers. An outlier is an observation whose value is highly inconsistent with the main body of the data. An outlier with an excessively large value will tend to increase the mean unduly, whilst a particularly small value will decrease it.

• The mean is an appropriate measure of central tendency if the distribution of the data is symmetrical.

The mean will be ‘pulled’ to the right (increased in value) if the distribution is skewed to the right, and ‘pulled’ to the left (decreased in value) if the distribution is skewed to the left.

2.1 What is a frequency distribution?

A frequency distribution shows the frequencies of occurrence of the observations in a data set. Often the distribution of the observed data is called an empirical frequency distribution, in contrast to the theoretical probability distribution determined from a mathematical model.

The class interval is a term used in statistics when we are given a continuous series. Class means a group of numbers in which items are placed such as 0-10, 10-20, 20-30, etc. Class interval refers to the numerical width of any class in a particular distribution.

2.2 Relative frequency distributions

Although creating a frequency distribution is a useful way of describing a set of observations, it is difficult to compare two or more frequency distributions if the total number of observations in each distribution is different. A way of overcoming this difficulty is to calculate the proportion or percentage of observations in each class or category. These are called relative frequencies and each is obtained by dividing the frequency for that category by the total number of observations (column 3 of Table 2.1). The sum of the relative frequencies of all the categories is unity (or 100%) apart from rounding errors.

Statistics

It is a branch of mathematics, which comprises several areas like Algebra, Trigonometry, Calculus, Geometry, Statistics and Probability etc.

Biostatistics is a mathematical science which analyses numerical facts or biometric data of biological events following certain rules like design of experiments, analysis of data, presentation of data with tables, figures hypothesis testing, making a probability prediction and conclusion etc.

or it is an art of analysis and presentation of data following certain rules and international norms accepted by international journals for pharmacology experiments, animal farm data, human and animal medicines data, epidemiology data, non-parametric data etc.

What is statistics?

The number of introductory or elementary texts on the subject of statistics indicates how important the subject has become for everyone in the biological sciences. However, the fact that there are many texts might also suggest that we have yet to discover a fool proof method of presenting what is required. The problem confronted in biological statistics is as follows:

When there is a need to make a set of numerical observations in biology, it has been observed that the values are scattered. Then questions arise to know whether these values differ because of factors e.g. treatments or these are part of a ‘background’ i.e., natural variation. You need to evaluate what the numbers actually mean, and to represent them in a way that readily communicates their meaning to others.

To combat malnutrition and micronutrient deficiencies, nutrition-sensitive agriculture is a food-based strategy to agricultural development that emphasizes dietary diversity, fortification, and consumption of nutrient-rich foods. This strategy recognizes the importance of consuming a wide range of foods for optimal nutrition and acknowledges the social and economic significance of the food and agriculture industries in supporting rural livelihoods (WHO, 2014)

The overarching goal of nutrition-sensitive agriculture is to enhance the ability of the global food system to produce nutritious outcomes. An increasing number of governments, donor agencies, and development organizations are endorsing nutrition-sensitive agriculture as a means to achieve their developmental objectives. However, relying solely on nutrition-specific interventions falls short of meeting global targets for improving nutrition. Agriculture, with its significant potential to influence nutrition outcomes, must also play a role. 

Fisheries and aquaculture sector have been increasingly recognized for their essential contribution to global food security and nutrition. In 2020, total global catches in inland waters were 11.47 million tonnes and India stands top in the world with 1.8 million tonnes. India has witnessed remarkable growth in fish production in the last couple of years and stands second in world aquaculture production. The total fish production during 20-21 is estimated at 14.7 million metric tonnes (MMT) with a contribution of 11.25 MMT from inland sector and 3.48 MMT from marine sector. During FY 2020-21, export of marine products stood at 1.15 MMT and valued at Rs. 43,717.26 crores despite the market uncertainties raised by the Covid-19 pandemic outbreak. The inland open water resources of India are the life line of country?s vast population and provide nutritional and livelihood security besides other innumerable economic, social and ecological services. In addition to India, countries of Mekong cooperations including Myanmar, LaoPDR, Vietnam, Copyright: New India Publishing Agency, New Delhi, India. Commercial Use will call for Legal Action. Cambodia and Thailand contribute significantly to the Asian Fish production. As per FAO (2022) report, a number of Asian countries majorly contribute to the Inland capture fisheries production including India, Bangladesh, Myanmar and Cambodia have reported a steady or decline in fish catch, since the last few decades. Though there are several potential threats behind this declining fish production trend, major is linked to water availability, pollution, overfishing and climate change. 

India’s journey through the 75 years of independence and its splendid achievements are acclaimed by the Government of India through its initiative, Azadi Ka Amrit Mahotsav. Since independence, the nation has traversed a great distance and achieved feats in various spheres, such as agriculture, science, technology, art and culture, to name a few. Azadi Ka Amrit Mahotsav commemorates 75 glorious years of progressive India and its rich history, diverse population, magnificent culture and great achievements. The Hon’ble Prime Minister of India, Shri Narendra Modi’s, through this campaign, envisioned the foundation of a self-reliant India, and he said, “The Azadi Ka Amrit Mahotsav means elixir of energy of independence; elixir of inspirations of the warriors of freedom struggle; elixir of new ideas and pledges; and elixir of Aatmanir bharta. Therefore, this Mahotsav is a festival of awakening the nation a festival of fulfilling the dream of good governance, and a festival of global peace and development”

1 . The government of India, to celebrate the 75th anniversary of India’s independence, organised a series of events under the campaign Azadi Ka Amrit Mahotsav. 

In May 2020, The Government of India launched the flagship scheme called Pradhan Mantri Matsya Sampada Yojana (PMMSY), with an estimated investment of Rs. 20050 crores, comprising a Central share of Rs. 9407.00 crores, a state share of Rs 4880.00 crores, and a Beneficiary contribution of Rs. 5763.00 crores for its implementation during a period of 5 years from FY 2020-21 to FY 2024-25 in all States/Union Territories (Guidelines on Entrepreneurship Models in Fisheries and Aquaculture under PMMSY, 2020). The PMMSY will address critical gaps in fish production and productivity, quality, technology, traceability, post-harvest infrastructure, and management.

Madhya Pradesh has the highest population of Schedule tribes in India. With a population of 15,316,784, they occupy 21.1% of the state’s total population and 14.7% of the total tribal population of India. About 61% of the rural tribal population in Madhya Pradesh is living below the poverty line and is primarily relying on agriculture and allied industries for their livelihood (Planning Commission Report, 2010). But since the majority of them rely on unscientific subsistence farming, the income earned from such practices is very low. Apart from the higher poverty level, the nutrition levels in Madhya Pradesh also signify a grave situation. The state has one of the highest levels of anaemic children and women in India, and this incidence is highest in tribal regions of the state. The tribal regions of Madhya Pradesh have one of the highest percentages of malnourished children in India (UNICEF, 2019). The undernutrition and anaemia in tribes are primarily due to the lack of access to quality food. 

Ornamental fish breeding and culture: an innovative scheme for the development of rural women.” Funded by the Department of Biotechnology, Ministry of Science & Technology Govt. of India, New Delhi.

Selection of members and group formation

The location was selected to impart the training on ornamental fish culture, based on the PRA, group discussions, and meetings with NGOs, village panchayat authorities, and members of the area. Raichak, Kamar Pool, and Diamond Harbour Road were the working locations. Groups formed by identifying the interested women from the selected location. In each group, there are 25 women registered for the training. The selected members were introduced to the ornamental fish farms located at Amtala to appraise the working possibilities and viability of the activities.

Ornamental fish trade is a part of the culture of fisheries in India and is an important sector for livelihood and income generation, especially for women. Recent trends in production and demand share assume that during the next five years, domestic trade will double from the present. The growth of any business depends on technology, management, market, and infrastructure. The ornamental fish industry includes breeding of exotic live-bearer and egg layer fish, captive breeding of indigenous ornamental fish, the development of small-scale enterprises, backyard fish breeding and culture activities in rural areas, and ancillary units with high potential for large- scale exports as part of the multibillion-dollar global trade of the ornamental fish sector. Women are sensible and caring enough to take care of and nurture the small, tiny, colourful fish in their backyard units of ornamental fish. One of the important sectors of the ornamental fish industry is aquarium making and decoration, which is not only women friendly but also ensures earnings. 

The SCSP training programme on biofloc-based fish farming in Manipur aimed to promote entrepreneurship in fish farming by providing training on modern and innovative techniques. The training programme was sponsored by MANAGE, Hyderabad, and was conducted by two organisations in Manipur: AOC Manipur and Green Biotech Ecosolutions Pvt. Ltd. The programme was held over a period of three days at Khurkhul Village, Imphal West, Manipur. The programme focused on biofloc-based fish farming, which is an innovative and sustainable method of fish farming that uses microbial flocs as a source of nutrition for fish.

There are various training programmes being conducted in Tamil Nadu to promote seaweed cultivation and its various applications. The one-day SCSP training programme organised by ICAR-RVS KVK, Tiruneveli, Tamil Nadu, and the three-day SCSP training programme on seaweed for food and industrial application by Jehovah Shamma Aqua One Centre, both sponsored by MANAGE, Hyderabad, seem to have been well received by the coastal population of Tamil Nadu. The training programmes covered topics such as the status and distribution of seaweeds on the Indian coast, by-products from marine seaweeds, and nutraceutical products from marine seaweeds. These are important areas of knowledge that can help the coastal population explore the various opportunities available in seaweed cultivation and to utilise the seaweed species to their full potential.

A one -day SCSP training program was organised by Mitraniketan Krishi Vigyan Kendra (ICAR), Kerala on 17 December 2021. The training theme was “Market opportunities for value-added Fish Products.” 4 male and 46 female participants participated in the training program. The training was taken at KVK, Mitaraniketan, Kerala.

The sessions were oriented towards theory and practice. The training modules and session topics delivered on various value-added fishery products were arranged for the beneficiaries to transfer their expertise in fishery products and equip them to establish entrepreneurship in fish and fishery products and market the fishery products. In addition to providing financial support for women, the programme would also help pregnant women and adolescent girls with their nutritional needs

ICAR SCAD Krishi Vigyan Kendra Thoothukudi District, Tamil Nadu, organised a 3 -day SCSP training programme on inland shrimp farming during 21st - 23rd December 2021, sponsered by MANAGE, Hyderabad. SC/ ST communities are given training on sustainable shrimp/prawn culture so as to enable them to take up shrimp culture as a means of self-employment or to get employed in shrimp farms by other farmers, thereby earning a livelihood. The participants were provided with hands-on training on pond preparation, stocking, feeding, water quality management, disease control, harvesting, and post-harvest processing of shrimp. In addition to this, they were also given insights into market trends and opportunities for shrimp farming. The participants were enthusiastic and showed keen interest in learning about the latest shrimp farming techniques and practices.

The aim of this training programme was to empower women from the Scheduled Caste community by providing them with skills to create handmade seashell jewellery and other handicraft products, which they could then sell to supplement their income. The training was conducted in a modular format, which included soft skill development, theoretical sessions, practical sessions, and field visits. The training programme was conducted in Keelathilayenthal Village in Ramanathapuram District, which is known for its rich marine life and abundance of seashells.

About the seashell-making-entrepreneurship model

The training programme was funded by MANAGE, Hyderabad, and was overseen by Dr. Shahaji Phand, Programme Director, and Dr. Sushrirekha Das, Coordinator. All 30 participants were women from the fishing community who were interested in learning seashell ornament- making skills. 

KVK Ramkrishna Ashram in Kolkata undertook a 5-day SCSP (Schedule Class Sub-Plan) training programme from MANAGE, Hyderabad, to develop integrated farming practices and encourage young people to choose farming as a career. West Bengal’s status as the highest fish producing state in India and its leadership in fish seed production present a significant opportunity for farmers and entrepreneurs in the fishery sector. Fish is widely consumed throughout the nation, especially in West Bengal, where it is estimated that each person consumes 15.6 kg of fish per year, compared to India’s average of 9.0 kg. It is regarded as a major source of essential micronutrients and the primary source of animal protein. By leveraging smart farming solutions enabled by technology, farmers can increase their productivity and income, while also meeting the demand for fish and essential micronutrients in the region. The training programme could play a vital role in empowering farmers and entrepreneurs in the state to adopt innovative and sustainable farming practices and make the most of these opportunities.

The one-day SCSP-training program on “Opportunities for fish farmer producer companies and government schemes for fisheries stockholders” was organised by Shashwat Sheti Vikas Pratishthan, Shivajinagar, Pune, Maharastra, on 4 January 2022. The training programme was sponsored by MANAGE, Hyderabad. 50 people participated in the training program, consisting of agrifarmers, fishermen and unemployed youths. Out of the 50 participants, 19 were women and 31 were men.

The session is all about FPO formation MANAGE organised a training programme to sensitise farmers about Farmer Producer Organizations (FPOs) and various schemes under PMMSY. FPOs can help farmers take advantage of economies of scale in production and marketing, and the government’s plan to establish 10,000 new FPOs by 2024 is a step in the right direction. It is while social media is a powerful tool for spreading information quickly, not everyone has access to it, especially in rural areas. So, training programmes like this can be very effective in reaching out to farmers and providing them with the information they need to make informed decisions about their farming practices.

It is clear that Odisha has significant potential for aquaculture due to its vast brackish water resources. However, as the aquaculture industry grows, it is important for farmers to be knowledgeable about the inputs and techniques they use to ensure the sustainability of the industry. A total of 2.98 lakh ha of estuaries, 0.081 lakh ha of backwater, 0.80 lakh ha of Chilika Lake, and 0.32 lakh ha of cultivable brackish water area make up the 4.18 lakh ha potential brackish water area for fish and shrimp production. Additionally, proper disease diagnosis and management are crucial for reducing the risk of disease outbreaks and ensuring the health of the aquatic animals being farmed. With appropriate training and support from organisations such as the Aqua One Centre, farmers can improve their practices and increase their yields, while also contributing to the economic growth of the region.

The demand for nutrients is rising, along with the population, which is rapidly expanding. The sustainability of life on earth now places a high focus on protecting the sources of sustenance. In this regard, aquaculture has a crucial role to play. The regulated raising of fish and other breeds in a particular environment is known as aquaculture. The natural resources and other elements required for sustainable development can be preserved using this method. The promotion of the value of nutrients and the expansion of employment prospects in the future are both made possible by aquaculture. Biofloc fish farming, which has set trends in fish farming all over India, facilitates recycling and reusing of the nutrients in the culture medium by filtering the unwanted substances and metabolites and converting them into nutrients, which benefits the zero exchange of water.

Fresh fish serves as a protein-rich food for people of all income groups. Dry fish is in greater demand when the availability of fresh fish in the market is low. Dry fish have a higher concentration of protein (in terms of weight) as compared to wet fish and are an inexpensive source of animal protein. Moreover, dry fish production provides employment opportunities to fishermen, fish farmers, rural youth, and women and also helps them to generate extra income. In addition, it also provides food and nutritional security to the rural, underprivileged population. Though dry fish enterprises have a significant role in improving the livelihood as well as the nutritional security of society, not much attention has been paid to the production and marketing of dry fish products.

Village Madangunj is situated on the bank of the Hatania Duaniya, a branch of the Hoogly River in Namkhana. The cyclone Aila unleashed its fury on the people residing on the islands in the Sundarbans and changed their lives forever. The Sundarban is the world’s largest mangrove forest and home to the Royal Bengal Tiger. The cyclone also affected the fish resources and livelihood of the villagers. Efforts were made to provide alternative sources of livelihood to the poor people of these villages.

Challenges and opportunities

We conducted field surveys to understand the status of small indigenous fish after cyclone Aila in the Sunderban region, particularly in Namkhana block, which was badly affected by the cyclone. Hundreds of people under various age groups ranging from 27 to 65 years old and involved in various occupations were interviewed personally to know about the present status of small indigenous fish after Aila. It was reported by 60% of the respondents that there is a significant reduction in the availability of small indigenous fish (SIF). To rejuvenate their stocks, it was decided to develop a conservation site, as a common seed bank for SIF. The SIF are self-recruiting species and can be cultured in various cultural systems like ponds, canals, wetlands, cages, etc. They can tolerate the adverse water quality cond

Canals and waterways are the most important source for irrigation and have been identified as one of the most important aquatic resources for fish culture. The natural canal systems in the Sundarbans cover an area of 907.33 ha. Fisheries activities were planned in order to provide a source of livelihood to the underprivileged people of the cyclone-prone area of the Sundarbans.

Challenges and opportunities

Fisheries in the Sundarbans are poorly documented and less attention is given to producing fish from canals. Information on the trophic status of the canal habitat, biotic community structure, and hydrological parameters is also lacking. However, the villagers reported that the fish enter these canals from the source waters naturally, and form natural populations. The villagers residing beside the canal catch fish, especially during monsoon, and the women of the adjoining households often collect small indigenous fish (SIFs) or prawns through small dragnets or scoop nets for household consumption. The shared information of the villagers was utilised to sensitise them and convince them to initiate fish culture in these canals.

The village of Khan Saheber Abad is located in the Sagar subdivision of South 24 Parganas district in West Bengal, India. It is situated 4.8 km away from the sub-district headquarter Rudranagar (the tehsildar office) and 99.6 km away from the district headquarter Alipore. A training programme was conducted for the empowerment of rural tribal communities through sustainable inland fisheries development and utilisation of open water bodies in the village.

Challenges and opportunities

The Khan Saheber Abad is primarily a tribal dominated village. These Tribal people belong to the Santhal community. They have a low level of literacy, declining or stagnant population, and are economically weak, but they are very close to nature.

Health benefits of fish consumption

Fisheries and aquaculture play an important role in providing food and nutritional security. Fish is a rich source of quality animal proteins, omega- 3: poly-unsaturated fatty acids (PUFAs), minerals, and vitamins. Fish is a superfood that is rich in all nutrients except carbohydrates, and its combination with rice or wheat makes it a complete food, forming a balanced diet with the right combination of macronutrients (quality proteins, fats, and carbohydrates) and micronutrients (minerals and vitamins), which are essential for good health.

Aquaculture is one of the fastest-growing food production sectors. India is bestowed with all types of aquatic habitats; freshwater, including the cold waters in the highlands, brackish waters, and the marine system. Being a tropical country, India is a biodiversity hotspot. It is rich in a wide variety of fish fauna, and wherever there is water, there are fish. Thus, fish is widely available in India, Thus, India is the third largest fish producing country and ranks second in aquaculture production. In comparison to other sources of animal proteins, fish is more chicken, mutton, beef, pork, etc., as affordable is available in wide varieties in the markets. Therefore, the common man can afford to consume fish regularly and provide his family with a balanced and healthy diet.

As a diet, fish is important for all age groups of humans. Fish oil, especially the omega-3 PUFAs, EPA, and DHA, keeps away several preventable human ailments (Table 1).

Packaging is an essential tool to make products stand out from the competition. Beyond the shelf appeal, packaging also provides protection to the contents from physical, chemical and microbiological hazards. However, a lesser known fact is that the same packaging material could also be a source of chemical contaminants, and hence, may impact food safety as well as food quality. Among the different components of packaging material, packaging inks play a critical role as they might hamper product and consumer safety.

Each packaging ink is a mixture of different chemicals and some of these chemicals might be harmful with the potential to migrate to the foodstuff. In terms of risk, the chemicals could be toxic, carcinogenic, mutagenic, repro-toxic and even endocrine disruptors. The chemical contaminants from the packaging inks can get transferred to the foodstuff by a process called migration.

Over the last two decades, a number of scientific papers have been published, revealing the migration potential of substances from the printed matter. However, the first big scandal that brought the subject alive was about the f indings of isopropyl thioxanthone (ITX, a low molecular photo initiator used in UV inks) in baby milk and other liquid foodstuffs all over Europe, resulting in a product recall in the year 2005. The food scandal alerted the packaging chain about the linkage between packaging inks and food safety. Consequently, the authorities issued strict regulations for the application of printing inks as well as general food control measures.

Introduction

Nanotechnology is a rapidly expanding branch of science that has a critical role to play in raising the standard of living for people in the modern world. The global market for nanotechnology in food packaging is valued at 20 billion in 2023 and is expected to grow to 46.50 billion by 2031, with a compound annual growth rate (CAGR) of 11.32% from 2024 to 2031 (InsightAce Analytic, 2023). The rapid expansion of nanotechnology has paved the way for number of industrial areas, including food processing, food contact materials, and agricultural output (Mohammadi & Jafari, 2021). Nanotechnology is the fastest-growing field of science that significantly enhances the quality of life in today's world. This rapid advancement has opened up numerous industrial sectors, such as food processing, food contact materials, and agricultural production. A natural advancement is the integration of nanotechnology into food packaging. This includes enhanced packaging, active packaging, and a new category known as smart or intelligent packaging. Food contact materials, such as antimicrobial metals and oxides, biodegradable nanocomposites, and nanosensors, are utilized to create active and intelligent packaging. These materials enhance thermal and mechanical durability, increase safety and extend the shelf life of food, and facilitate the monitoring of packaged food (Kah et al., 2013). At the nanoscale, material properties change significantly, making it challenging to predict, identify, evaluate, and manage the health, safety, and environmental risks associated with nanomaterials. For example, nanoparticles (NPs) of 50 nm can enter cells, those of 70 nm can penetrate the lungs, and 30 nm NPs can cross blood-brain barriers.

Introduction

The landscape of the Indian food industry has undergone a dramatic transformation in recent years. Rising disposable incomes, coupled with the rapid pace of urbanization, have fuelled a surge in demand for convenient and processed food options. Consumers, increasingly pressed for time, are turning towards ready-to-eat meals, packaged snacks, and a wider variety of processed food products. While this trend signifies a growing economy and changing lifestyles, it has also brought to light a critical concern: ensuring food safety and empowering consumers with clear and accessible information. In order to empower consumers to make educated food choices and build trust between brands and consumers, food label transparency is crucial. Transparent labelling is essential for improving public health because it gives precise and unambiguous information about ingredients, nutritional value, and possible allergies. This information helps prevent diseases linked to a certain lifestyle, such diabetes, heart disease, and obesity. Additionally, it guarantees that customers are not misled about the quality or provenance of their food, shielding them from dishonest business tactics. Transparency also promotes market justice by levelling the playing field, making product integrity apparent, and fostering creativity and brand loyalty. Transparent labelling promotes ethical and sustainable consumption while also facilitating international trade by adhering to regulatory norms in many countries.

Recognizing this need for a more transparent and consumer-centric food ecosystem, the Food Safety and Standards Authority of India (FSSAI) introduced the FSS Labelling and Display (L & D) Regulations in 2020 under the Food Safety and Standards Act, 2006 (FSS Act). This landmark legislation marked a significant shift in the way food is labelled and marketed in India. By establishing stricter regulations and mandating the inclusion of comprehensive information on food packaging, the FSSAI aimed to empower consumers to make informed choices while also promoting fair competition within the food industry. This comprehensive review delves into the intricacies of the FSS Labelling and Display Regulations 2020. It explores the key provisions of the regulations, analyzes their impact on various stakeholders, and examines the challenges and opportunities associated with their implementation. By providing an in-depth analysis, this chapter aims to shed light on the significance of these regulations in shaping a more responsible and transparent food industry landscape in India.

Introduction

Food packaging materials development has been driven by the need to protect food products throughout distribution and storage. Nanotechnology offers opportunities to improve technical packaging features and develop sustainable smart packaging and sensors for monitoring product quality over time. However, the inherent permeability of conventional packaging materials to atmospheric gases and water vapour poses challenges in maintaining optimal conditions for food. The integration of nanotechnology into food packaging has emerged as a promising solution to address these challenges. Nanocomposite materials, composed of a polymer matrix and nanoscale fillers, offer a novel approach to enhancing packaging performance while addressing issues related to food spoilage, degradation, and safety.

Nanocomposite materials encompass a range of nanomaterials, including inorganic (i.e., metals and metal oxides), nanoclay, organic nanomaterials, and nanoemulsions (Huang et al., 2018; Jamaleddin et al., 2019; P. Kumar et al., 2020). NMs are used for three types of packaging: improved packaging, active packaging and intelligent packaging, Nanotechnology facilitates the development of improved bio-based packaging, enhancing mechanical strength and barrier performance while maintaining stability under varying environmental conditions (S. Kumar et al., 2020; Zhang et al., 2020). Active packaging harnesses nanostructures to encapsulate bioactive compounds, encompassing antimicrobials, antioxidants, and oxygen scavengers, which can interact with food and extend its shelf life (Motelica et al., 2020). Intelligent packaging releases active compounds in response to environmental triggers such as temperature or pH changes, transforming packaging into an intelligent, actively responsive material (Jamróz et al., 2019).

Introduction

A biopolymer is defined as a polymeric substance obtained from any living organism (plant or animal) [1]. These polymers are organic compounds where simpler molecules are covalently bonded with each other [2]. Although biopolymers are strictly synthesized naturally by living cells but some of them are also synthesized from non-biomaterial as well. Natural biopolymers are of different types based on their chemical nature like carbohydrate based, protein based or lipid based. Biopolymers can be broken down by the action of naturally-occurring organisms which leaves organic non-harming by-products like water and carbon dioxide in the environment[3].

Bio polymers are gaining importance in the field of food packaging, medical application, commodity packaging etc. because of their have specific physical, chemical, biological, biomechanical and degradation properties. Wide ranges of natural or synthetic biopolymers capable of undergoing degradation hydrolytically or enzymatically are being investigated for many applications[1]. Bio polymers are mainly based on two properties: a) Biological origin b) Biodegradability.

Earlier natural biopolymers such as cellulose, protein, starch have been used extensively for food applications. Recently, synthetic biopolymers such as polylactic acid (PLA), polycaprolactone (PCL), polyglycolic acid (PGA), polyvinyl alcohol (PVOH), and polybutylene succinate (PBS) are gaining more attention[4] for various applications. Natural biopolymers are more stereospecific and mostly hydrophilic having complex 3D structures as compared to the synthetic polymers[2]. Among the synthetic biopolymers some are microbiologically degradable in the environment whereas some are recyclable[1].

Introduction

The purpose of this e-book is to outline the main hazards in food production and processing that could influence the safety of foods and thus the health and wellbeing of consumers. The suggestive actions to restrain the formation of compounds or organisms that may threaten the safety of a food will be discussed along with the legal and regulatory framework.

“Safe Food Now for a Healthy Tomorrow”

Food is the third most basic human need, after air and water. Only when food is safe can it contribute to our food security and health. When food is not safe, people cannot thrive, hunger and poverty cannot be alleviated, and a healthy life is not possible. Food safety has a significant impact on human health, and food, which is essential for human survival, comes from plants and animals. Food safety is a core tenet of One Health.

This chapter gives an overview of the main hazards such as physical hazards, chemical hazards, biological hazards, and adulterants in different types of foods and how the hazards influence the safety of the food along with health and well-being of the consumers. The effective way of management of these hazards and different hazard limits set by the regulators such as FSSAI, USFDA, EU AND CODEX along with labelling requirements for the hazards has been discussed in this chapter.

Introduction

Packaging is an integral and pervasive part of contemporary world. Packaging makes material handling convenient, economical and effortless and modern consumer marketing will seem virtually impossible without packaging. For an engineer or food scientist, packaging is specialized arrangement of matrices fabricated for the delivery of safe food products with maintaining high quality and food safety, at every step of distribution chain including procurement of raw material to manufacturing of finished product; packaging of product; storage; transportation and distribution to wholesaler, retailer and consumer and even for recycling operations [17].

Packaging of food is imperative in a world dominated by marketing-based economy The fact that 73% of purchase decisions are made at point of sale highlighted the importance of a good package design in marketing. During scanning of food package, consumer made quick and rapid perception about the inclusion of a particular food based on the various verbal and nonverbal attributes embodied on food package [25]. Designing is an indispensable are of food packaging. It is medium to attract potential buyers and distinguished the product from the competitors. The presence of visual attributes on package design will not only ameliorates the food product and glamorizes the packets but also defines its authenticity and peculiarity. Therefore, a quality package design is characterized as communication channel between the manufacture and consumer, and unless performed correctly the market image of the brand and product suffers and influence consumer’s perception.

Food Contact Materials (FCM)

Before food consumption, during production, processing, preparation, packaging, packing, transportation, storage, serving etc. food comes in contact o many materials, all these materials are called food contact materials (FCM). FCM may be containers used for transportation for example milk container, machineries for its production or processing, packaging materials for its packaging like cans of soft drinks, kitchenware used for its cooking, serving, heating, washing. The selection of FCM requires intense care because FCM can affect human health and also the quality of food. During contact with food, molecules can migrate from FCM to food. Hence, FCM should have the following common attributes:

1. FCM should be compatible with the materials used for production, processing, transport, storage, serving etc.

2. FCM should be inert and non-reactive.

3. FCM should withstand the chemical, Mechanical and Thermal variations.

4. FCM should be clean, hygienic and tamper proof.

5. FCM should not have blisters, cracks, sharp edges and visible defects. 6. FCM should be free from rust.

Introduction

Packaging of food material is an essential component of food industry since packaging provides protection, physical tampering resistance and unique appearance to the food products which attracts the customers (Robertson, 2006). The handling of food products would be inefficient and costly if they are not packed properly (Robertson, 2006). The style and design of packaging influence their sale as well as demand. The main aim of packaging is to corroborate the safety and quality of food by preventing microbial contamination (Lee K.M, 2010). Plastics, papers, glass and metals are the common materials used for packaging of food products (Arvanitoyannis and Bosnea, 2004). Among these plastics are most commonly used packaging material because of their low cost, light weight, design freedom and high durability (British Plastic Federation). Various additives are added to the plastics to achieve desired physical and chemical properties. These additives are stabilizers, plasticisers, lubricants and f lame retardants. These additives have potential to transfer from the packaging materials to the food stuffs(K Bunia et al., 2013).

The efficient food packaging solutions are the need of the hour for the Earth. The food losses including the production, post harvest, processing stages of the supply chain and food wastage includes loss of edible food occurring at the f inal stages of food chain that is during retail supply or ultimate consumption. The food born illnesses cannot be ignored which are a consequence of the contamination of food by bacteria, viruses, parasites, new chemical entities or toxicants. We need to optimise the food supply chain, increase food shelf life and consciousness amidst food producers to food consumers. The active and intelligent packaging may help the globe through sufficient food for the increasing population. Scavengers/ absorbers are important solutions which may absorb substances from the packaging inner atmosphere (ethylene absorbers, oxygen scavengers; emitters and antioxidants).

Introduction

Food packaging is one of the most dynamic and fast-growing industries in the current scenario of increasing industrialization. With the constant upsurge in the food wastage at different stages of processing (suchas harvest, storage, processing, transportation, and distribution) leads to more than 15% of food produced ending up in the dumping grounds due to food spoilage caused by climatic conditions andmicroorganisms.Ever-increasing demands of consumers for convenient food makes packaging technology a need of the hour in order to keep the food safe, wholesome and of high quality at the same time.

So appropriate packaging has the potential of not only preventing spoilage but also taking care of healthand well-being of the individuals.Therefore, packaging plays the most important role in the overall safety of the food product.This makes packaging as the ever-evolving field since new requirements need new materials which demands new approaches and technology for better quality products.

By definition, Food packaging is a well-organized system of protecting the food product from any kind of physical, chemical, and biological damage in order to ensure that food reaches the consumer in its most safe condition at minimum applicable cost. It is bridge between production and consumption (Paine, 1992).

Sprinkler irrigation is an advanced method of irrigation in which water is sprayed to air and allowed to fall on the ground similar to rainfall. The spraying of water occurs through nozzle connected to a network of pipes with water under pressure. The rate of application and area of coverage under a sprinkler is regulated by suitable selection of nozzle size and pressure in the system.

History of Sprinkler Irrigation

The sprinkler irrigation has started elsewhere in the world in the early part of twentieth century. Before 1920, sprinkler irrigation was limited to orchard, nurseries and intensive vegetable cultivation. The cost of sprinkler reduced considerably by the development of impact sprinkler and lightweight steel pipe with quick couplers in the 1930s. As a result, sprinkler irrigation began to spread in larger area and to the area of field crops. However, sprinkler irrigation developed mainly after the Second World War with the introduction of lightweight portable aluminum pipe.

Sprinkler irrigation has started in India from mid of 1950s. Due to requirement of high initial investment, the average Indian farmers cannot afford the system and therefore the area under sprinkler irrigation in India was 0.66mha (approx.) out of total irrigated area of 87.80mHa in 1995 (INCID). The sprinkler irrigation was first introduced in India in hilly regions such as Western Ghats in Kerala, Tamil Nadu, Karnataka and in the North Eastern States especially by plantation owners for irrigating tea, coffee and cardamom crops. Since the cost of aluminum pipe is high, to replace it, High Density Polyethylene Pipe (HDPE)/PVC with suitable modification have been introduced in sprinkler system. However, the area under HDPE/PVC piping system is below 20% to the total area under sprinkler irrigation. The remaining area is cultivated under aluminum or steel based sets. The indigenous manufacturing of the system has started in India only 35-40 years ago and there are about fifty numbers of manufacturers till 1996 (INCID). The details of the cultivated area under sprinkler irrigation system in the world and in Indian States are given in Table 8.1 & 8.2 respectively.

Drip system has great promise for efficient utilization of available irrigation water. In our country and elsewhere in the world the scientists are unanimously agreed to adopt drip irrigation method for higher application efficiency and thereby better use of scarce irrigation water. Saksena (1993) reported water losses of only 1-2% in drip irrigation in comparison to 6-9% in sprinkler and 30-35% in surface irrigation method. However, very small area compared to other methods of irrigation so far is irrigated by drip system in our country. Up to 2000 the total area under drip irrigation was 2,59,600 ha in India (Alam & Kumar, 2000). Initial high investment for drip network and pumping system, of course, are discouraging to the most of our farmers. Sharma & Abrol (1993) mentioned that in spite of the very encouraging results and attractive subsidies offered by the Govt. of India, the adoption of the drip irrigation system has not picked up to the expected level. Along with the other reasons they pointed out the high initial cost of the system and lack of research effort on developing cost-effective design suited to local condition are responsible for non-practice of drip irrigation at a considerable scale.

Some research works has been conducted to find out low cost method of drip irrigation. Biswas (1998) developed a manually operated drip irrigation system made of bamboo mains, laterals and sub-laterals. The system and its performance are described below.

Drip Network

The main and laterals of the drip network were made of hollow bamboo pieces each of 3m lengths with 7.5cm and 4.0cm diameter respectively. The sub lateral or the emitters were the bamboo twigs of 0.25cm inside diameter and 1.05-1.10m length to suit the spacing between the plant rows. The mains and laterals were made for the required length in the field by jointing together the sections one after another (Fig. 7.1). The ends of two sections, which contact each other, were made such that one section easily gets inside the other for about 10-15cm.

Introduction

Fertilization is the application of fertilizer for the benefit of the crops. It may be traditional broadcasting or fertigation. In broadcasting method the fertilizer is applied in concentrated granular form. The size of the granules ranges from granular dust to pellet size. These solid fertilizers get dissolved by the rain or irrigated water to leach down the plat root zone. This method results uneven nutrient delivery due to uneven dissolving the fertilizer granules. It may cause burning of plant leaves and root system due to uneven and uncontrolled release of nutrients. Dry fertilizers can volatilize and release gases which may damage or burn the nearby foliage. Availability of fertilizer to the plant root zone largely depends on the temperature and availability of water to dissolve the fertilizers.

In fertigation liquid or water-soluble fertilizer, soil amendments or other products required by the plants is either sprayed on to the plant material or applied to the plant bottom with irrigation water. Foliar application provides high rate of absorption of fertilizer through the leaf/stalk/branch structures of plants. Ground application also provides good consistency in making its way to root zone and plant absorption. Thus, the fertigation provides benefit of increased nutrient absorption; decrease water needs, and reduce the fertilizer and chemical use (Anonyms, 2005).

Introduction

There is different type of distributors available in the market. Depending on the basic principle of working they may be broadly classified into three major groups as below (FAO, 1980).

i. Distributors in which head loss takes place through small diameter tubes

ii. Distributors in which head loss takes place through some orifice control

iii. Distributors in which head loss takes place through a vortex action

There are many adaptations to distributors though the working distributors fall under the above stated basic principle. Tiny perforation in the laterals or porous materials allows leaking out the water serves the purpose of distributors. The compensating type distributors have long path in it to dissipate the energy and drips almost same rate within certain range of pressure variation. Whatever may be the distributors proposed to be used, the discharge characteristics should be known. The discharge characteristics should be provided by the manufacturers and preferably certified by any authorized body; otherwise to be tested by the designer before recommendation to large-scale use.

The pipe network in a drip system consists of a mainline, sub mains, laterals, and distributors. The layout of the pipes depends on the physical factors like shape and size of the area, topography and any other obstacles in the field. In any field there may be the scope of different layout of the pipes. The most economic one should be selected. In general, contour line is followed in laying the laterals in sloping land, sub main length usually be shorten in uphill and equally spaced laterals on either side of a sub main in a flat land provides good layout.

Hydraulic Formulae /Head Losses in Pipes

There are numerous equations for solving the head loss in pipes. The most commonly used are the Darcy-Weisbach, Hazen-William and Scobey’s.

Crop Water Requirements

In designing an irrigation system, the primary objective is to know the water requirement of crops. Water requirement of crops are determined either by f ield cultivation or by estimation through commonly used empirical formulae such as Blaney Criddle, radiation, Penman or pan evaporation method.

Definitions

Crop water requirement or evapotranspiration (ETcrop ): It may be defined as the rate of evapotranspiration of a disease free crop growing in a field of not less than one hectare under adequate fertility and water supply so that full productive potential can be achieved in prevailing environment. Evapotranspiration requirement of a crop refers the ETcrop and expressed in mm/day.

Reference crop evapotranspiration (ET0 ): It is the rate of evapotranspiration from an extended surface of 8 to 15cm tall green grass of uniform height, actively growing, completely shading the ground and not short of water. ET0 may be computed by using the empirical formulae and meteorological data for the specific period.

In drip irrigation water is distributed throughout the field from a system of pressurized pipelines. The pressure must be sufficient to overcome the frictional losses and elevation differences. The system also deserves discharge from all the emitters and the emitters must dissipate the pressure difference between the inlet to emitters and atmospheric pressure.

The flow through the drip pipes may be laminar or turbulent or a combination of both. The laminar flow is characterized by the layers of cylindrical tubes of which the maximum velocity is at the center about double of the average velocity. The turbulent flows having pulsatory cross current velocities and maximum velocity is about only 1.25 time of the average velocity. Turbulent f lows loss more energy than laminar flow due to development of the cross current velocity.

Reynolds Number

The criterion for distinguishing the flow from laminar to turbulent was developed by Osborne Reynolds (1842-1900) and was named as Reynolds number; Re . The Reynolds number in circular pipes flowing full is expressed as

Introduction

Drip irrigation is an efficient method of application of water at the plant bottom at a rate nearly equal to the consumptive use rate of the plant, thereby minimizing the conventional water losses like percolation, runoff and evaporation from soil. It is a process of slow application of water on, above or beneath the soil by the surface, sub-surface, bubbler, and spray or pulse system. Fertilizer can also be applied with the drip water. Emitters or applicators are placed closed to the plants and used to spray water in the form of drops, tiny streams or miniature spray. In the drip system water applied from the point source advances in all direction in the soil outward from the source. Drip irrigation is essentially a low rate, low pressure, frequent and long duration application of water in plants root zone area.

Drip irrigation is also called as localized irrigation, trickle irrigation, daily f low irrigation, diurnal irrigation, drop irrigation, sip irrigation, and micro irrigation. A particular name is being popularized in any area depending on the choice of the people of that area. The International Commission for Irrigation and Drainage (ICID) has recommended the term micro-irrigation while the American Society of Agricultural Engineers (ASAE) has preferred drip irrigation. In India it is told as drip irrigation.

• General Consideration

• Post-mortem examination of large animals

• Post-mortem examination of poultry

• Steps in post-mortem examination

• Writing of post-mortem report

• Collection, preservation and dispatch of specimens for laboratory diagnosis

General Consideration

Necropsy is examination of animal after death also known as post mortem examination. It helps in diagnosis of diseases and their control. It is said that “Necropsy is a message of wisdom from dead to living”. Necropsy include systemic examination of dead animal, recording of pathological lesions, their interpretation to make diagnosis of disease. Sometimes it is difficult to arrive any conclusion merely based on gross examination of dead animal. Then one should seek the help of laboratory examinations such as Histopathology, Microbiology, Immunology and Toxicology for confirmation.

• Neoplasm General

• Neoplasm in cattle and buffaloes

• Neoplasm in sheep and goat

• Neoplasm in equines, swine and camels

• Neoplasms in pet animals

• Neoplasms in poultry

• Neoplasms in wild animals

• Neoplasms in laboratory animals

Concretions

Concretions are solid, compact mass of material, endogenous or exogenous in origin, found in tissues, body cavities, ducts or in hollow organs. Concretions are stone-like bodies commonly occur in urinary system, gall bladder and gastrointestinal tract. Concretions of endogenous origin are known as calculi while those formed from exogenous material are known as piliconcretion (Hair), phytoconcretion (plant fibres) and polyconcretion (polythenes).

Calculi

Calculi are formed due to deposition of salts around the nucleus/nidus consisting of either fibrin, mucus, desquamated epithelial cells or clumps of bacteria. Due to the gradual and repeated precipitation of salts, calculi become laminated. In the process of calculi formation, the inner structural arrangement gets shrink, producing a rough superficial surface. Calculi formation is more common in urinary system and in gall bladder of man and animals; however, they may also occur in salivary gland, pancreas and intestines.