eChapters

It all started after the famous lecture, “There is plenty of room at the bottom” given by Richard Feynman on December 29, 1959. Nanomaterials are intermediate between macroscopic solid and of atomic and molecular systems. Nanomaterials have certain properties which make them different from that of the bulk materials, including large fraction of surface atoms, high surface energy, spatial confinement, and reduced imperfections. Nanotechnology deals with various structures of matter having dimensions of the order of a billionth of a meter (Ray Unmesha. 2018). From the advent of nanotechnology, people realized that certain materials can exhibit different properties based on its size and shape.
 

Bio-fertilizers, as the name indicates, are the fertilizers of biological origin (Gupta, 2012). In strict sense, real bio-fertilizers are green manures and organics - materials of biological origin which are added to supply plant nutrients present in them. However, in restricted scope, the term ìbio-fertilizersî or ìmicrobial inoculantsî are preparations of living organisms in alone or in combination, which may help in increasing crop productivity by way of fixing atmospheric Use of Bio-Fertilizers in Sustainable Agriculture 175 nitrogen in soils, solubilizing of insoluble plant nutrients, stimulating plant growth or decomposing of plant residues. 

Important Points to Remember

• The word ‘Extension’ is derived from Latin roots ‘ex’ and ‘tensio’.
• The use of the term ‘Extension’ originated in England in 1866 with a system of University extension which was taken up first by Cambridge and then Oxford Universities.
• James Stuart is considered as father of University Extension.
• Dr. K.N. Singh is known as father of Extension in India.
• Agricultural extension operates within a broader knowledge system that includes research and agricultural education.

13.1 Biosafety

Biosafety is the prevention of large-scale loss of biological integrity, focusing both on ecology and human health. These prevention mechanisms include conduction of regular reviews of the biosafety in laboratory settings, as well as strict guidelines to follow. Biosafety is used to protect from harmful incidents. Many laboratories handling biohazards employ an ongoing risk management assessment and enforcement process for biosafety. Failures to follow such protocols can lead to increased risk of exposure to biohazards or pathogens. Human error and poor technique contribute to unnecessary exposure and compromise the best safeguards set into place for protection. The international Cartagena Protocol on Biosafety deals primarily with the agricultural definition but many advocacy groups seek to expand it to include post-genetic threats: new molecules, artificial life forms, and even robots which may compete directly in the natural food chain.

Crops belonging to family Cucurbitaceae are generally known as ‘Cucurbits’. It consists of a wide range of vegetables either used for salad purpose (cucumber) or for cooking (all gourds), pickling (West Indian gherkin) or as dessert fruit (muskmelon, water melon) or candied or preserved (ash gourd). As a group, cucurbits occupy the largest area in India and in other tropical countries. Its use is not primarily because of calories, minerals or vitamins since they are generally low to moderate in nutrients with a few exceptions like bitter gourd (rich in vitamin C- 96mg/100g), pumpkin (vitamin A 1600 IU/100g), Kakrol (high protein 3.1g/100g,), parwal and chow chow (calcium- 531 mg and 140 mg / 100 g respectively). From the nutritional point of view, cucurbit seeds are valued for their high oil and protein contents. Seed proteins of cucurbits are comparable to that of legumes and are richer in methionine.

The family Cucurbitaceae comprises about 117 genera and 825 species in warmer parts. Chakravarthy (1982) estimated 36 genera and 100 species in India.

Nematodes are invertebrate roundworms that inhabit marine, freshwater and terrestrial environments. They comprise the phylum Nematoda or Nemata, which includes parasites of plants and of animals, including humans, as well as species that feed on bacteria, fungi, algae, and on other nematodes. Four out of every five multicellular animals on the planet are nematodes. All nematodes may look alike, the smallest being scaled down versions of the largest. The phrase tube-within-a-tube is a convenient way to think of nematode body structure and also a term used to refer to a major trend in the evolution of triploblastic metazoa. It refers to the development of a fluid-filled cavity between the outer body wall and the digestive tube. The nature of this body cavity has led to the grouping of metazoa into three grades, acoelomate, pseudocoelomate and eucoelomate. Nematodes together with Rotifera, Gastrotricha, Kinorhyncha, Nematomorpha, Acanthocephala and Entoprocta are traditionally grouped together as pseudocoelomates on the basis of possessing a body cavity that is not formed from the mesoderm or fully lined by peritoneum.

Table 1: Descriptive statistics of the socio-economic and communication characteristics of the respondents in terms of Range (Minimum and Maximum), Mean, Standard Deviation (SD) and Coefficient of Variation (CV) of Alluvial Zone in West Bengal

Table 1 Represents the distribution of variables in terms of range i.e. maximum and minimum values, mean, standard deviation and coefficient of variation for alluvial zone of West Bengal.

It has been found that for the independent variable age (x₁), the range lies between 82 and 27 years, where the oldest respondent is of 82 years and the youngest respondent being 27years old. The mean value of the age of the respondents in this study was found to be 51.49 years with a standard deviation of 12.42 in the dataset. Coefficient of variation for this variable was found to be 24.14 per cent, which indicates a high level of consistency in the distribution.

The pipe network in a drip system consists of a mainline, sub mains, laterals, and distributors. The layout of the pipes depends on the physical factors like shape and size of the area, topography and any other obstacles in the field. In any field there may be the scope of different layout of the pipes. The most economic one should be selected. In general, contour line is followed in laying the laterals in sloping land, sub main length usually be shorten in uphill and equally spaced laterals on either side of a sub main in a flat land provides good layout.

Hydraulic Formulae /Head Losses in Pipes

There are numerous equations for solving the head loss in pipes. The most commonly used are the Darcy-Weisbach, Hazen-William and Scobey’s.

ABSTRACT

Plasmids are circular, double-stranded DNA molecules which replicate autonomously from the chromosome of the host organism. Plasmids are found in many bacterial species and often confer upon the host cell phenotypic characteristics such as resistance to antibiotics, resistance to heavy metals, ability to produce particular protiens, conjugative (mating) ability and ability to degrade xenobiotc compounds. One of these degradative plasmids may encode a complete catabolic pathway (such as toluene to pyruvate, formate and acetaldehyde) or partial degradative steps, such as octane to octanol. In this later case, the remainder of the pathway may be encoded by chromosomal genes, by genes of other plasmid present in the host, or by other microorganisms. Many degradative plasmids possess a broad host range, especially among the gram-negative bacterial species.

There are different mechanisms which may be involved in the evolution of aromatic pathways in general and in the process of adaptation of microorganisms to xenobiotic substrates in particular. Gene transfer, the occurrence of plasmids in bacteria in the natural environment is an important pool of genetic information residing on plasmid vehicles may flow among indigenous microorganisms. Since many examples of self-transmissible plasmids that carry genes for degradation of aromatic or other xenobiotic compounds are known, and their role in spreading these genes to other microorganisms is well characterized. Early, studies of TOL, NAH, and SAL plasmids revealed strong homologies among these plasmids in regions both inside and outside the catabolic gene clusters. Plasmids, pJP4, pAC25, and PSS50, catabolic plasmids carrying genes for chloroaromatic degradation, have strongly homologous plasmid backbone that determine replication and transfer function. Furthermore, the chlorobenzoate plasmid p51 was also shown to be homologous to pJP4 outside regions of the catabolic genes. These observations suggest that a few common self-transmissible ancestor replicons (includes origin of replication and replication gene) may have been involved in acquisition and spread of different catabolic genes. DNA

1.    Introduction    3
2.    History and Scope of Microbiology    4
    2.1.    Controversy over the origin of microorganisms, 5
    2.2.    Germ theory of fermentation, 6
    2.3.    Germ theory of disease, 6
    2.4.    Development of laboratory techniques and pure cultures, 7
    2.5.    Discovery of immunization, 7
    2.6.    Discovery of protection against infection, 8
    2.7.    Discovery of chemotherapeutic agents, 8
    2.8.    Microorganisms as geochemical agents, 9

1. Introduction
 
The bryophytes are found everywhere in the world except in the sea. They grow on wet soil or rock, the trunk of trees, in lake, river and even in Antarctic island. The bryophytes are placed taxonomically between algae (Fig. 1) and pteridophytes (Fig. 2); there are about 24,000 species in the world. They are further divided into three phyla, Bryophyta (mosses 14,000 species, Fig. 3), Marchantiophyta (liverworts 6,000 species, Fig.4a,b) and Anthocerotophyta (hornworts 300 species, Fig. 5). They are considered to be the oldest terrestrial plants, although no strong scientific evidence for this has appeared in the literature. This hypothesis was mainly based on the resemblance of the present-day liverworts to the first land plant fossils, the spores of which date back to almost 500 million years. Among the bryophytes almost all liverworts possess beautiful cellular oil bodies (Fig. 6) which are peculiar, membrane-bound cell organelles which consist of ethereal terpenoids and aromatic oils suspended in carbohydrates- or protein-rich matrix, while the other two phyla do not. These oil bodies are very important biological markers for the taxonomy in the Marchantiophyta (Asakawa, 1982, 1995; Asakawa et al., 1979b, 2008c, 2012b, 2013a,b; Asakawa and Ludwiczuk, 2008a,b; Ludwiczuk and Asakawa, 2010).

Definitions

        Toxicology: Knowledge (or science) of poisons, including their chemical properties, identification, biological effects, and the treatment of conditions they cause.

        Poison: Any solid, liquid, or gas that, when introduced into or applied to the body, can interfere with the life processes of cells of the organism - by its own inherent chemical properties - without acting mechanically and regardless of temperature.

Every nutrient has its specific functions to play in the biological system. As we know there are six nutrients i.e., water, carbohydrate, protein, fat, minerals and vitamins and each of these have different functions, it will be discussed separately for each nutrients.

2.1 Water

Water is the ideal dispersing medium because of its solvent and ionizing powers which facilititates cell reaction and due to its high specific heat which helps to absorb the heat of these reactions with a minimum rise of temperature. Lean adult body contains about 70 percent of water, though the amount varies from embryo to mature animals.

    1.    Microbial Risk Assessment (MRA) can be considered a tool for use in the management of the risks posed by food borne pathogens and in the elaboration of standards for food in international trade.

    2.    MRA comprises risk assessments of particular pathogen - commodity combinations

    3.    According to codex alimentarious commission (CAC) microbial risk assessment is defined as a scientifically based process consisting of 4 components.

        ·    Hazard identification
        ·    Exposure assessment
        ·    Hazard characterization
        ·    Risk characterization

1. Introduction

Fruits and vegetables have been an integral part of man’s diet from immemorial times. Fruits are the portions of plants that bear seeds, while vegetables are the edible components of a plant, including the leaves, stalks, roots, tubers, bulbs, flowers and seeds. These can be eaten raw or cooked. Fruits and vegetables can be preserved for short-term intervals under refrigeration, with or without receiving a minimal treatment like slicing, chopping, shredding or peeling. Fresh produce may also be irradiated or packaged in controlled or modified atmosphere in films for short-term storage. Long-term preservation includes canning, juicing, drying and addition of preservatives. Food contamination with hazardous biological agents remains a worldwide challenge in food safety and nutrition (Kenny 2002; Schlundt 2002; Tauxe et al 1997). Microorganisms form part of the epiphytic flora of fruits and vegetables and many will be present at the time of consumption. Production practices, growth conditions and the location of the edible part during growth (soil, soil surface, aerial part) will in combination with intrinsic, extrinsic, harvesting and processing factors affect their microbial status at the time of consumption. Man-made sources may be directly from farm laborers and from the equipment used for harvesting or storage. The types of microorganisms on fruits and vegetables would also vary with the orchards, vineyards or growing fields. The resident microflora normally subsists on the slight traces of carbohydrates, proteins and inorganic salts that dissolve in the water exuding from or condensing on the epidermis of the host. The numbers of bacteria present will vary depending on seasonal and climatic variation and may range from 104 to 108 per gram. The inner tissues of fruits and vegetables are usually regarded as sterile (Lund 1992). However bacteria can be present in low numbers in the insides of the fruits and vegetables as a result of the uptake of water through certain irrigation or washing procedures.

Introduction
At the beginning of the 21^st century, with a population of 6.1 billion in 2000 and expected to be headed for 9.1 billion by 2050 (UN News Centre, 2005), the challenge of yet again increase food production by many folds only in 50 years has become a daunting task in itself. The situation is further worsen because now, we need to increase food production in sustainable way by 2050 on approximately the same area of arable land using less resources, particularly, fossil fuel, water and nitrogen, at a time when we must also mitigate some of the enormous challenges associated with climate change. Furthermore, there is the critical and urgent humanitarian need to alleviate poverty, hunger and malnutrition which is afflicting more than 1 billion people

1.     What is IPM
    
2.    What is a Pest
    
3.    Importance of Crops in IPM
    
4.    Impact of Environment in IPM
    
5.    Crop Stage Specific IPM
    
6.    Management Practices
    
7.    Tropical Tuber Crops
    
8.    Ornamental Plants
    
9.    Medicinal Plants
    
10.    Aromatic Plants
    
11.    Plantation Crops
    
12.    Masticatory
    
13.     Spices
    
14.    Fruit Crops
    
15.    Vegetables
        
References

8.1    History of Sprinkler Irrigation
    
8.2    Advantage and Limitations of Sprinkler Irrigation
    
8.3    Scope of Sprinkler Irrigation in India
    
8.4    Type of Sprinkler System and Components
    
8.5    Design of Sprinkler Irrigation System
        
Questions and Problems
        
References

House Plants refer a group of ornamental plants, both foliage and fowering, used for decoration of house interiors besides verandahs, corridors, porch, stairs, window sills etc. These are of various categories namely trees (juvenile), shrubs, herbs, bulbous, rhizomatus and other shade loving plants. House plants are generally grown in pots and displayed for making interiors delightful and cosy. In addition, such arrangements enhance the architectural beauty of the buildings. These are easily shifted from one place to another as per display plan. Moreover, option of changing the whole lot with a new set provides opportunity to create a new look of the site.

Foliage type house plants with their exquisite leaves, colour, variegation and uniqueness add grandeur to the interiors. On the otherhand, flowering ones having a spectrum of flower colour, are added attraction for beautifying relatively lighted areas of house. House plants are also grown as bedded plants in the gardens where ground space is available.

Successful growing of house plants depends on right selection of species considering climatic conditions, proper placement and maintenance. The main purpose is to make interiors decorative and lively. In addition to the aesthetic effect, house plants make the interiors more humid and cool. Besides, they absorb pollutants and supply oxygen. In cities, space for outdoor gardening attached to the house has almost vanished due to non-availability of land and high cost. As a result, popularity of growing house plants has increased manifold. Display of house plants is also a regular practice in other places like offices, institutes, banks, hospitals, factories, hotels etc. as these create an ambient working atmosphere besides beautification.

Soil is a living system and soil fertility is the key to agricultural productivity. Any input that destroys this living system and undermines soil health basically undermines the agricultural productivity. The maintenance of the fertility of soil is the primary step in any permanent system of agriculture.

Fertile land and sufficient water are vital for sustaining agriculture and livelihoods. Fertility of a soil is defined by its ability to provide all essential nutrients in adequate quantities and in the proper balance for the growth of plants – independent of direct application of nutrients – when other growth factors like light, temperature and water are favorable. This ability does not depend on the nutrient content of the soil only, but on its efficiency in transforming nutrients within the farm’s nutrient circle.

In transformation of nutrients soil organisms play a key role. They break down biomass from crop residues, green manures and mulch and contribute to build up of soil organic matter, including humus, the soil’s most important nutrient reservoir. They also play an essential role in transferring nutrients from the soil organic matter to the mineral stage, which is available to plants. Soil organisms also protect plants from disease and make the soil crumbly.

A fertile soil is easy to work, absorbs rainwater well, and is robust against siltation and erosion. It filters rain water and supplies us with clean drinking water. It neutralizes (buffers) acids, which pass through contaminated air to the soil surface, and decomposes pollutants such as pesticides rapidly. And last but not least a fertile soil is an efficient storage for nutrients and CO₂. In this way a fertile soil prevents the eutrophication of rivers, lakes and oceans and contributes to the reduction of global warming.

In the context of biological agriculture soil fertility is thus primarily the result of biological processes, not of chemical nutrients. A fertile soil is in active exchange with the plants, restructures itself and is capable of regeneration. The biological properties can be observed in the soil’s conversion activity, in the presence and the visible traces of the organisms in it. The communities of microorganisms are robust and active at the right moment. In the self-regulating ecological equilibrium animals, plants and microorganisms all work for each other.

It is the responsibility of farmers to understand soil ecology to the point that they can create or restore the conditions for a robust balance in the soil. If a soil does not regularly bring good yields, farmers should investigate the reasons for it.

6.1. Line × tester analysis

A successful approach of crop breeding programme depends on the proper choice of best parents for hybridization and the ideal selection adopted in the early generation. But, the selection of parents for hybridization programme is relatively tough in the case of complex traits like yield and their components as they governed by large number of quantitative genes which are influenced by environments and seasons. Thus, breeders often meet with difficulty to fix in advance the desirable parents which will give superior progenies. In such a situation, knowledge on the nature of gene action on such complex quantitative traits of economic importance is necessary to plan and adopt appropriate selection techniques (Simmonds, 1979) and breeding methodology.

Combining ability analysis gives useful information regarding the selection of parents in terms of the performance of the hybrids. This analysis elucidates the nature and magnitude of various types of gene action involved in the expression of quantitative traits (Dhillon, 1975). Thus, the knowledge of combining ability serves as an useful tool for the selection of plants for hybridization and further exploitation. Combining ability consists of general and specific combining ability.

Sprague and Tatum (1942) defined general combining ability (gca) as the “average performance of a line in hybrid combinations” and specific combining ability (sca) “as those cases in which certain combinations do relatively better of worse than would be expected on the basis of the average performance of the lines involved. The general combining ability provides an indication of the importance of genes of largely additive in nature, while specific combining ability indicates the importance of non-additive gene effects.

Several biometrical techniques are available to estimate the general combining ability of parents and specific combining ability of hybrids. Among them, line × tester analysis is extensively used both in self and cross pollinated crops. The advantage of line × tester analysis is that a large number of inbred lines can be evaluated than diallel analysis. Besides, it provides additional information on the performance of the specific hybrids on gene action in contrast to top cross or polycross. The line × tester analysis is an efficient biometrical approach for assessing the combining ability of parents and hybrids (Kempthorne, 1957).

The Mineral Kingdom presents a dazzling floral-display in the form of natural crystals. This is what makes mineralogy a very fascinating subject both for an amateur as well as an expert. Unless one visits the celebrated Lechuguilla cave in New Mexcio, USA it will be difficult to visualize the breathtaking beauty that crystals present. This, over 160 km cave is lined with gigantic as well as delicate gypsum crystals- as thin as human hair to several centimetres across and 6 m long . Crystals come in all shapes, sizes and colours. Their beauty and regular shape has not only attracted the scientists but made them objects of magical and mythical powers in many cultures of the world.

The study of crystals - including their growth, structure, classification by form and their physical properties forms the subject of crystallography. As of today one can’t think of this subject without x-ray crystallography, however, this being not in your syllabus only an introduction will be presented in the last chapter, while the entire section will be devoted to fundamental aspects of crystal morphology.

The section comprises four chapters. Chapter I describes and introduces the theme, presents a brief historical background of the development of the subject and gives some fundamental definitions. Chapter II presents the morphological elements including symmetry elements( plane, axes and centre of symmetry), parameters, indices, notation of crystal faces and other related aspects which are the basis for dividing crystals of all shapes and sorts into six or seven systems and several sub-types. This chapter will help you understand as to why mineral galena belongs to cubic system, while gypsum is monoclinic, or as to why an octahedron is represented by a symbol (111) but a cube with (100). Chapter III describes the seven systems and their sub-types and ends with an account of twinning- a curious feature quite often encountered among crystals. The section ends with a preliminary idea about stereographic projection and x-ray crystallography.

Design and Construction of a greenhouse involves five distinctly different aspects viz. (a) Basic form or type, (b) structure/designs, (c) covering materials and its fixing, (d) foundation and constructional detail, and (e) crop-support, irrigation and drainage planning.

All the above aspects are interlinked. To have a clear idea, these individual aspects are discussed separately.

4.1. Basic Forms of Greenhouse

Before considering anything about construction, one should finalize the form of construction. There are different forms of greenhouses for different climatic and crop situations. These types of structures are planned according to the requirement of farmer/promoter and obviously according to the purpose. Now we will describe, in brief, some of the important form or type of greenhouses.

4.1.1. Greenhouse covered with transparent and impervious material

These structures are covered with water/rain impermeable transparent materials which allow necessary solar radiation for optimal growth of plants. Simultaneously it protects crops from temperature-fluctuation, rain, wind, and creates a favourable situation in respect of CO₂ and humidity. This covering is also used to prevent the re-radiation of heat energy and conserve the heat generated in daytime to raise night temperature inside.

7.1. Introduction

Cultivation of crop is one of the most important aspects on which the success of a greenhouse depends. Principally it is similar to that of open field cultivation; but it is a completely different proposition in comparison. In greenhouse it needs (1) high precision technology, (2) special management, and (3) high qualityinputs. A special crop husbandry is extremely necessary, integrating all these three aspects, for successful greenhouse cultivation.

Why special crop husbandry? – Ancestors of each and every crop of modern time once grew out of its own in wild, without any human intervention. Gradually it has been domesticated or brought under cultivation by progressive alteration of its natural growing and reproduction process. Even the genetic nature also altered gradually. Till recent past these development of domestication process has been restricted principally on reproduction, planting, nutrient supply, water supply, and plant protection aspects. Interestingly most of these aspects are still very much supplementary in nature, as a good percent of it is still dependent on nature and its growing system.Actually, we cannot confer any significant change, physically or genetically, in their adaptation against the natural elements like rain, sunlight, temperature, humidity, gas supply, etc. However, we try our level best with a compromising note on local climate.

Hence there is ample scope to go for complete alteration of their growing habit/ practices in relation to each and every aspect of the climatic elements. It is a very difficult job, because, for a small change in any individual aspect of plant growth, all the other aspects are affected. Thus, one has to make a proper and holistic balance of alteration of all the growth aspects for each and every individual domesticated plant, we call as crop.

2.1 Introduction

Consider two linear equations in two variables i.e., x and y, such that equations are

India has emerged as the largest producer of milk in the World. This has boosted the confidence of producers, planners, dairy entrepreneurs and scientist alike. India has poised to play a major role in global dairy market in coming decade. The rapid growth of science and technology has positive impact on our life style and with strong trend of urbanization several demographic changes are likely to occur. There going to be ever increasing demand on the role of milk and milk products for human health. Accordingly, the demand for higher standards of milk products in terms of hygiene and safety of dairy products is to be followed. The competitiveness for the export of milk products among different dairy industry has increased in recent times due to GATT agreement. The biggest challenge before Indian dairy industry is the quality and safety of milk products indented for human consumption. Legal standards are made to have control over quality of food offered for sale and to safe guard the consumer form health hazards. It is therefore, imperative to determine different parameters that define product quality and safety. The purpose is to ensure production and distribution of products within well defined and accepted standards. This chapter deals with various parameters of product testing in order to maintain requisite prescribed standards.

8.1 Black Pepper Breeding

Black pepper (Piper nigrum L., family:Piperaceae), known as the ‘King of Spices’ and “Black gold”, is one of the important spices since time immemorial and perhaps the oldest spice regarded globally. It is a perennial climber grown for its fruits that are used as spice with plethora of medicinal properties. Black pepper is also very important in traditional medicine (Ravindran, 2000). However, it is mainly valued for its characteristic pungency and flavour, as an ingredient in food preparations and also as a condiment.

Genetic Resources

World’s largest collection of black pepper germplasm is maintained by the Indian Institute of Spices Research (IISR) at Kozhikode, Kerala, containing local cultivars, wild forms collected from the area of origin and related species. At present there are about 3466 accessions, consisting of 1266 wild relatives, 2062 cultivars, in addition to 9 exotic collections maintained in India. These collections were characterized and evaluated to estimate the genetic diversity for various yield and quality characters. Cultivar diversity is one of the principal components of diversity in black pepper. The cultivars are evolved directly from the wild P. nigrum.

Statistics has originated as a science of statehood and found applications slowly and steadily in Agriculture, Economics, Commerce, Biology, Medicine, Industry, planning, education and so on. Sir Ronald A. Fisher, (1890 – 1962), who is called “the Father of Statistics”, drew many solid conclusions

1.2 Definition

Statistics is the science which deals with the collection of data, organisation of data (or) classification of data, presentation of data, analysis of data and interpretation of data, which are known as the statistical methods.

“Statistics is the science, technology and art of creating new knowledge.”

–RA Fisher.

“By statistics we mean, aggregate of facts affected to a marked

extent by multiplicity of causes numerically expressed enumerated or

estimated according to reasonable standard of accuracy collected in a

systematic manner for a predetermined purpose and placed in relation

to each other.”

– Professor Horace Secrist

Number line

Every real number occupies a position on the number line and conversely,

every point of the line can be matched with a real number.

Absolute value

The absolute value of modules of a number is equivalent to the value of that

number ignoring the sign. For example, the absolute value for -1 is 1, and the

absolute value of +1 is also 1.The absolute value is defined by the symbol

?x?.

7.1 General

The major portion of water in a crop field gets lost through evaporation and transpiration. Evaporation is the process by which water is changed from the liquid state to vapor state. It takes place from the adjacent soil, water surface or from the surfaces of leaves of the plants. Transpiration is the removal of water vapour through plant body. Evapotranspiration(ET) is the sum of evaporation and transpiration. The process of evaporation and transpiration goes on simultaneously and difficult to separate them in a crop field.

The term consumptive use is used to refer evapotranspiration together with the water used in the metabolic activities of the crop plants. The actual amount of water used in metabolic activities is insignificant (less than 1% to ET). Therefore, the consumptive use and evapotranspiration are often used as synonymous term. It includes the water consumed by the plants

As water consists of two positively charged hydrogen ions and a single negatively charged oxygen ion, water is arranged as a polar molecule having positive and negative sides. This molecular polarity leads to water’s high dielectric constant (ability to withstand or balance an electric field). Water is able to dissolve many substances because the polar water molecules align to shield each ion, resisting the recombination of the ions.

1. Education 1.1. Some Landmarks of Agricultural Education Including Vegetable Science Year Landmarks 1952 Indian Council of Agricultural Education (ICAE) set up (worked up to 1964 under ICAR). 1958 First ‘Deemed University‘ status bestowed on Indian Agricultural Research Institute (IARI). 1959 Chief of Agricultural Education and ex-officio Secretary to ICAE appointed. 1960 Emergence of SAUs, starting with Pantnagar, based on the recommendations of Joint Indo-American Teams. 1965 Standing Committee on Agricultural Education replaced the Education Panel. 1965 ICAR reorganization with four Divisions including Agricultural Education 1966 ICAR developed Model Act for Agricultural Universities in India.

This chapter analytically represents the results of the empirical research study with the appropriate discussion on the basis of analysis.

6.1. Results of data collected from moringa growers of Tamil Nadu

6.1.1. Visualisation of descriptive statistics

This Table-6.1 presents 18 independent variables (x1-x18 ) and 5 dependent variables (y1-y5 ) in terms of their descriptive statistics viz. Minimum, Maximum, Range, Mean, Standard Deviation (S.D.), Variance and Co-efficient of Variation (C.V.).

of moringa growers, the maximum years of experience is 44 years and the minimum years of experience is 3 years. The Range of this variable x1 was found to be 41. The mean value of experience was found to be 16.033 years, with the Standard Deviation of 8.324 and Variance of 69.289 for the total distribution taken for the study.

The chemicals, which can destroy pests or prevent their occurrence by their chemical action are known as ‘Pesticides’. Pesticides include ‘insecticides’, acaricides’, ‘nematicides’, rodenticides’, molluscicides’ etc., which are used to destroy insect pests, mites, nematodes, rodents, slugs and snails respectively. Pesticides have been used even before the time when man never knew how to read and write. Even before 200 BC, several substances were known to control pests. Sulfur, arsenic poisons, fluorine poisons, as well as some plant extracts and oils were used to control pests. However, these substances could destroy only a few specific pests only to some extent.

Advances in the invention of pesticides

The invention of many of the present day pesticides started only after 1867. ‘Paris green’, a synthetic chemical was the first pesticide used to control the ‘Colorodo beetles’ of potato. Up to 1939, only a few inorganic chemical compounds and plant poisons were used as pesticides. Only after the Second World War much advances were made in chemical research. After the invention of DDT in 1939, a revolution had started in the field of pest control. Following the introduction of DDT, several other pesticides were identified and introduced for pest control. In 1941, BHC was invented by the British and French scientists. During the same period, organophosphorus pesticides were invented by the German scientists and parathion, malathion, demeton etc. were introduced.

Origin of Fowl

Domestication of poultry seems to have been undertaken in south-east Asia. The chickens were brought to India by 1000 BC, and later on they spread north, westwards and reached Greece by 525 BC. By the beginning of Christian era, the birds were already popular in West Asia and East Europe, and then gradually reached South Africa, Australia, Japan, USSR and USA.

Red Jungle fowls are the ancestors of the present-day poultry breeds. There are four known species of wild fowl and they belong to the same genus “Gallus” meaning a cock. The four species are as follows:

The Red Jungle fowl is supposed to be the main contributor for the development of modern-day poultry and is widely distributed throughout Burma, China, India, Philippines, Sumatra and Thailand. The plumage (colour of the feather) of females resembles that of Brown Leghorn, the males have orange red feathers in hackle, wing bow and saddle regions, while the breast is black. Eggs are buff (off-white) in colour. The legs are slate (dark bluish grey) coloured. The comb is all red.

Life is fundamentally a complex interplay of chemical interactions and reactions. Chemistry examines the composition and properties of matter, the interactions between chemical components, and the mechanisms by which complex structures are formed. Biological chemistry, or Biochemistry, delves into these principles within the context of living systems, highlighting the intricate relationships between molecular structure and function. Understanding fundamental chemistry and its application to anatomy and physiology is crucial because the human body is composed entirely of chemical substances. Basic chemistry encompasses the study of matter, its various states, and energy in all its forms. In order to understand the basic chemistry of living let us start from the scratch of learning and remembering everything that we have learnt so far. Matter and Its Properties Anything with mass and occupying space is referred to as matter. Solid, liquid, and gas are its three main states. Mass, distinct from weight, represents the quantity of matter in an object and remains constant regardless of location. In contrast, weight depends on gravitational force. 

Biochemistry: An Overview of Biomolecules Biochemistry is a branch of science that delves into the chemical composition and interactions of cells and organisms. It focuses on the molecular structures found within biological systems, their chemical characteristics, functions, and the reactions they undergo. By studying these molecules, biochemists gain insights into the fundamental processes that sustain life. Properties of Biomolecules General Characteristics Biomolecules are fundamentally organic compounds, sharing similar properties with typical organic molecules. They obey the same physical and chemical principles, undergo similar reactions, and adhere to universal physical laws. However, their complexity and biological specificity distinguish them from simpler organic compounds. Composition and Structural Features The backbone of biomolecules is predominantly composed of carbon, which forms four covalent bonds, often exhibiting a tetrahedral geometry. Carbon skeletons can exist in diverse forms like linear,

Origin, History and Definition

The term biotechnology was coined by Karl Ereky, a Hungarain engineer, in 1919. The origin of biotechnology can be traced back to prehistoric time when armers and gardeners have been making use of hybridization and grafting among plants with a view to bring about an improvement in existing attributes. Using these approaches, several hundred varieties in ornamental plants were produced. Microorganisms were already used for processes like fermentation, formation of yoghurt and cheese from milk, vinegar from molasses, production of butanol and acetone from starch by Clostridium acetobutylicum or the production of antibiotics like penicillin from Penicillium notatum. Four defferent phases of biotechnological research were witnessed during the last century. In 1920, Chain Weizmann used Clostridium acetobutylicum to convert starch into butanol and acetone (during world war I, acetone was used as an essential component of explosives). Alexander Fleming in 1929 discovered penicillin from Penicillium notatum and wounded soldiers were given treatment using this antibiotic during world was II. In 1970s with the discovery of restriction enzymes, which led to the development of recombinant DNA, technology brought a revolution in the field of biology. The latest phase in the history of biotechnology is the study of structure and function of whole genome (DNA) and whole proteome (protein). This area of research is described as genomics and proteomics, respectively. Some more important activities in the field of biotechnology are given in Table1

In fact, biotechnology is the product of interaction between science of biology and technology. It is the technological exploitation and control of biological system. Biotechnology has wide range of its uses and accordingly Office of Technology Assessment described biotechnology as: (i) old biotechnology that includes fermentation, i.e. formation of vinegar from molasses and that of cheese and yoghurt from milk, production of antibiotics from certain fungi and process of baking and brewing and (ii) new biotechnology that includes the techniques of recombinant DNA and PCR polymerase chain reaction, cell culture and fusion and bioprocessing which became possible only through the researches in molecular biology. However, no efforts have been made to distinguish between old and new biotechnology. Keeping in view the importance of biotechnology, attempts have been made to define it. Following are some of the definitions of biotechnology, however, none of the definitions of biotechnology seems to be complete. The first definition seems to be comprehensive and wide.

The theory of probability has its origin in the games of chance related to gambling such as throwing a die, tossing a coin, drawing cards from a pack of cards etc. Jerame Cardon (1501-1576), an Italian mathematician was the first man to write a book on the subject entitled “Book on Games and Chance”, which was published after his death in 1663. The systematic and scientific foundation of the mathematical theory of probability was laid in mid-seventeenth century by two French mathematicians B. Pascal (1623-1662) and Pierre de Fermat (1601 1665).

Important terms and concepts

To understand probability, let us first get acquainted with some important terms and concepts associated with probability.

• Trial: An experiment is any natural or planned activity for which it is not possible to predict the particular result called a trial.

• Events: The possible outcomes of experiments of a trial are called events. For example: Tossing of a coin in an experiment and one toss of the coin is called trial. In tossing of a coin there are only two outcomes or events, i.e. head or tail.

Types of events

Events can be of following different types:

• Exhaustive events

• Equally likely events

• Mutually exclusive events

• Dependent events

• Independent events

• Null or impossible events

• Exhaustive events: It is the total number of all the possible outcomes of an experiment.

9.1 Introduction

In order to increase the production and productivity of crops, provision of irrigation system is highly essential. A project that makes use of weir or a barrage for providing irrigation to fields is called as direct irrigation system. On the other hand, a storage irrigation system makes use of storage reservoir by construction of dams. In order to provide irrigation by both the schemes, it is necessary to have a network of canal systems. A canal is an artificial channel, generally trapezoidal in shape constructed on the ground to carry water to the fields. The canal systems that provide water to the fields include main canals, branch canals, distributaries, minors and watercourses. It is imperative to design the canal systems properly for a certain realistic value of peak discharge that must pass through them so as to provide sufficient irrigation to the command areas. The flow irrigation that provides irrigation water to the fields may be of two types i.e. Inundation irrigation and Perennial irrigation.

8.1. Introduction

Providing appropriate nutrition is an elementary step in dairy animal production. Improper nutrition prevents cattle to express full genetic potential for milk production and reproductive efficiency. Nutrition helps in maintaining good health condition of the animal.

Therefore, one should know the basic digestive physiology, various types of nutrients and their requirements in different categories of animals present in a dairy herd. As feed cost contributes principal expenditure of a dairy farm, balanced ration should be prepared in a cost effective manner. Proper understanding of feeds and rations also help to explore alternative feeds and supplements without hampering the health as well as productivity of the animals. Effective dairy farming requires converting feed into milk which worth more than the total cost of production (mostly contributed by feed cost).

SYNOPSIS

Vegetables are essential for well-balanced diet since they supply phytonutriceuticals. About 3 billion people in the world are malnourished due to imbalanced diets. Regular consumption of a vegetable rich diet has undeniable effects on health since they have been strongly associated with improvement of gastrointestinal health, good vision, and reduced risk of heart disease, stroke, chronic diseases such as diabetes, and some forms of cancer.

4.1 Introduction

Precipitation is a major component of hydrological cycle. It occurs because of condensation of water vapour molecules in the atmosphere. When the precipitation falls on the grounds, it undergoes several phases before it appears as runoff in the streams. Certain amount of precipitations is intercepted by the foliage of plants and roofs and other parts of the building and other hydraulic structures. This intercepted water is called as interception loss which is evaporated to the atmosphere. Sometimes the dried surface of the buildings and other structures soak certain amount of precipitation while falling on them which also adds to interception loss. After striking the land masses, certain amount of the precipitated water gets infiltrated into the soil surface which then moves both in lateral as well as in vertical direction. This loss is called as infiltration loss. For the study of groundwater, infiltration loss is not a loss but rather it is a gain in terms of groundwater recharge. However for a surface water hydrologist, it is a loss since it decreases the amount of runoff contributing to the stream or any other water bodies.

The classification of living organisms has passed through several changes and has reached the present stage with the gradual assimilation of more and more knowledge about them. The classification is mainly based on the anatomy, life style, habits, habitats, metamorphosis and such other characteristics. Though the concept of classification of living organisms was perhaps started by Aristotle between 384 - 322 BC, it was the Swedish scientist Carl Linnaeus (1758) who presented the classification, which was acceptable to most of the Taxonomists. He propounded the binomial nomenclature of naming each and every organism of animal and plant origin with a generic and species name. In his classification, he was consistent in using Latin names for all the organisms. He was the originator of a regular system of classification in which he recognized larger and smaller categories, the larger ones comprising of a varying number of smaller ones. Because of his contribution in the field of Taxonomy, he is rightly called the ‘Father of nomenclature’. A.D.Imms later modified the system to some extent in 1961. However, Brauer (1885) laid the foundation of the modern system of classification of insects. He was the first one to emphasize the fundamental division into primitive wingless insects, the ‘Apterygota’ and the winged or secondarily wingless insects, the ‘Pterygota’. The latest code on classification and nomenclature was approved and published by the ‘International Trust for Zoological Nomenclature’, London in 1964.

The method of preserving various food stuffs by drying them, and thereby depriving microorganisms of the water necessary for their growth, has been known for centuries. According to Marco Polo’s accounts of his travel in Asia in 13^th century, soldiers of Kublai Khan carried dried milk on excursions. Before it was used, water was added to a portion of dried material. Mixing was accomplished by movement of the horse during riding on the trip. The recombined product was then consumed at the mealtime. The belief is that part of the fat was removed from the milk before drying and dehydration was accomplished by solar heating.

Drying is defined as the removal of the liquid, usually water, from a product by evaporation, leaving the solids in an essentially dry state. Today the production of dried milk and milk products has become important segment of dairy industry. Dry milk provides a means of preserving the excess milk supply during the flush season for use during the lean season. The value added dried dairy products like malted milk foods, infant food and infant formulae and dairy whiteners are convenient ready to use products having wide acceptance. The water content of milk powder ranges between 2.5 and 5%, and no microbial growth occurs at such low water content. Drying extends the shelf life of milk, simultaneously reducing its weight and volume. The main purpose of drying milk are: a) to improve the storage life of the product due to low moisture content, b) to reduce cost for storage and transportation of product due to reduced bulk, and c) to provide convenient product for utilization in many dairy and food preparations.

The production of dried milks to a great extent is now being governed by the market requirement and to some specialized use of such products. Considerable quantities of dried skim milk powders are being used extensively in the preparation of ‘Reconstituted and Recombined milks”. Milk powders are also used extensively in the manufacture of ice cream, bakery products, confectionary products, cottage cheese and in other cheese varieties. The greatest proportion of milk powder is utilized in confectioneries, such as milk chocolate, caramels, soft sweets, coatings, biscuits and cakes. In these products, milk powder has a special effect on the quality of particular products: it improves consistency, flavour as well as nutritional value and shelf life.

A. Bhattacharya    
    
4.1.    Factors of Abiotic Stress
    
4.2.    Light
    
4.3.    Temperature
    
    4.3.1.    Heat-stress Threshold
    4.3.2.    Low Temperature Stress
    4.3.3.    Plant Responses to Heat Stress
    
4.4.    Water
    
    4.4.1.    Drought
    4.4.2.    Flooding
    
4.5.    Soil
    
    4.5.1.    Soil Type
    4.5.2.    Soil pH
    4.5.3.    Soil Fertility
    4.5.4.    Soil Salinity
    
4.6.    Growth and Development
    
    4.6.1.    Phases of Development Sensitive to Temperature or Photoperiod
    
4.7.    Phenology
    
    4.7.1.    Changes in Phenology of Cropping Systems
    4.7.2.    Effect of CO2 on Flowering
    4.7.3.    Temperature and Effects on Phenology
    4.7.4.    Effect of Salinity
    
4.8.    Molecular/Genetic Aspects of Flowering Response to Climate Change
    
4.9.    Simulation of Phenology for Future Climate
        
    References