eChapters

Body Parts of Farm Animals

It is important to know about the various terms used to indicate different body parts of the animals so that whenever a description of the animal/body part is presented, one could specifically understand it. Some of the terms used to point out different body points of common livestock species have been shown in Figure 2.1.1-2.1.5. Terms which are more frequently used for different livestock species have been depicted in Table 2.1.1.

The earth's crust is made up of minerals and rocks. Minerals are inorganic substances with a definite chemical composition, whereas rocks are mixture or aggregates of minerals. Each mineral is composed of certain elements present in fixed proportion. For example, mineral quartz, SiO₂ is a compound of the elements silicon (Si) and oxygen (O) combined in the proportion of 1:2, so its chemical formula is SiO₂, whereas rock granite is a mixture of several minerals like quartz, feldspar etc. Nature has provided unique physical properties to different minerals that can be used to identify them.

4.1 Physical Properties of Minerals

Majority of minerals contain following properties that can be used to identify them in field and in laboratory: crystal habit, cleavage, hardness, density, luster, streak, color, tenacity, magnetism, and taste.

4.1.1 Crystal habit

The faces that develop on a crystal depend on the space available for the crystals to grow. If crystals grow into one another or in a restricted environment, it is possible that no well-formed crystal faces will be developed. However, crystals sometimes develop certain forms more commonly than others, although the symmetry may not be readily apparent from these common forms. The term used to describe general shape of a crystal is habit.

Some common crystal habits are as follows:

Abstract: Rose is a popular cut flower and flowering garden plant. Fragrance, wide colour range, plant forms and wide adaptability make it a versatile floriculture crop. The diagnostic traits of the different classes are described with reference to their potential commercial value. Increasing genetic information and trait heritability has been established for this crop and molecular genetic techniques are valuable tools aiding modern rose breeders, cultivars are almost exclusively asexually propagated. A gametophytic self incompatibility is found within this species. Numerous cultivars developed through hybridization and mutation techniques are discussed. Rose breeding efforts have been focused on miniature forms, floral fragrance, recurrent blooming, diverse colours, thornlessness, potential rootstocks, mutilple disease, pest resistance and winter hardiness. Transgenic research is highlighted. The journey of rose is endless and rose breeding may continue forever.

Keywords: Rose, intervarietal hybridization, mutation, inheritance, self incompatibility, rootstock, seed production, genetic transformation.

Economics

The term “Economics” is derived from the Greek words ‘OIKOS’ and ‘NOMAS’ or ‘NEMEIN’. ‘Oikos’ means house hold and ‘Nomas’ or ‘Nemein’ means management. So in its original sense economics means house hold management; i.e. satisfying as many wants of the house hold or family as possible by allocating the limited resources at the disposal of the family wisely among different wants. In the modern and practical sense Economics means management of day to day problems arising from unlimited wants and limited resources by wisely allocating limited resources to satisfy maximum wants. In other words economics is the study of how man manages his limited resources as it satisfies as many wants as possible.

Shrubs are the most diverse groups of ornamentals grown in tropical gardens. In habit they are hardy perennials having low spreading woody branches. They vary widely in stature and include dwarf bushes to those attaining the stature of small trees.

IMPORTANCE AND USES OF SHRUBS

Shrubs are quick growing and many of them flower continuously in the humid tropics. Their variability in flower colours and foliage characteristics and their easiness in propagation by vegetative means make them garden favourites. The various uses to which shrubs are put to in gardens are detailed below: -

In A Shrubbery : Grouping of shrubs in a shrubbery is done to display the attractiveness of their flowers and foliage. In temperate situations shrubs grown in shrubberies include Rhododendron, Peony, Fuchsia, Buddleia, and Camellia while in the tropics and subtropics, the range of shrubs available for planting are very wide.

As Focal Point Plants : Shrubs that are ever flowering like Hamelia and Hibiscus or those that have spectacular flowers such as Mussaenda, Neerium and Ixora are grown as focal point plants in small gardens. They are also grouped for mass effect in large gardens.

H erbs include non-woody or succulent-stemmed plants that are relatively shorter in stature when compared to shrubs. Based on their ornamental nature they can be broadly grouped as Flowering Herbs and Foliage Herbs. Flowering Herbs can be further classified based on their duration into Annual Flowering Herbs and Perennial Flowering Herbs. Foliage herbs of a perennial nature are further differentiated into monocotyledonous and dicotyledonous foliage herbs.

ANNUAL FLOWERING HERBS

Annual herbs are grown in gardens for their spectacular beauty when they are in flower. They are seasonal in habit and have duration of up to four months. Most of them have a short vegetative phase, which is followed by continuous flowering for several weeks. They are used in gardens for obtaining various colour effects. Varieties of annuals having analogous or similar flower colours can be grouped in flowerbeds and flower borders for monochromatic effects. For contrasting colour effects, varieties having complementary or contrasting colours like violet and yellow or blue and orange as well as green and red can be used. For colour blending effects, flowers having different shades of the same colour can be grown.

Mycotoxins are naturally occurring toxins produced by certain molds and can be found in food. The molds grow on a variety of different crops and foodstuffs including cereals, nuts, spices, dried fruits, apples and coffee beans, often under warm and humid conditions. Mycotoxins can cause a variety of adverse health effects and pose a serious health threat to both humans and livestock. The adverse health effects of mycotoxins range from acute poisoning to long-term effects such as immune deficiency and cancer. A scientific expert committee jointly convened by WHO and the Food and Agriculture Organization of the United Nations (FAO), called JECFA, is the international body responsible for evaluating the health risk from natural toxins including mycotoxins. International standards and codes of practice to limit exposure to mycotoxins from certain foods are established by the Codex Alimentarius Commission based on JECFA assessments.

Mycotoxins are toxic compounds that are naturally produced by certain types of molds (fungi). Molds that can produce mycotoxins grow on numerous foodstuffs such as cereals, dried fruits, nuts and spices. Mold growth can occur either before harvest or after harvest, during storage, on/in the food itself often under warm, damp and humid conditions. Most mycotoxins are chemically stable and survive food processing. Several hundred different mycotoxins have been identified, but the most commonly observed mycotoxins that present a concern to human health and livestock include aflatoxins, ochratoxin A, patulin, fumonisins, zearalenone and nivalenol/deoxynivalenol. Mycotoxins appear in the food chain as a result of mold infection of crops both before and after harvest. Exposure to mycotoxins can happen either directly by eating infected food or indirectly from animals that are fed contaminated feed, in particular from milk.

Introduction

Fermentation is an alluring procedure of biochemical adjustment of essential nourishment microorganisms and their enzymes accomplish by lattice. Fermentation is a utilized to upgrade bio-accessibility and bioavailability of supplements from various crops and improves organoleptic properties (e.g., appearance, generation of sour taste and new aroma compounds, and textural changes such as consistency or viscosity) just as increase the shelf life of realistic usability. It makes foodstuff safe not just hindering the growth of pathogenic microorganisms because of antimicrobial growth of lactic acid and it also detoxifies aflatoxin. With these advantages, fermentation is a successful method to reduce the risk of mineral deficiency among population, particularly in developing nations where unrefined cereal or pulses are profoundly consumed. Tragically, it is additionally connected with multiplication of microorganisms, for ex., yeast and molds caused food safety concerns, (Omemu et al; 2011), decrease in provitamin A and antioxidant (Ortiz et al; 2017), carotenoids, just as loss of nutrients and minerals (Hotz & Gibson, 2007).

Fermentation is a minimum cost-efficient procedure for production and preservation of nutrient, therefore fermented food is an important piece of the eating regimen in numerous of the world. In the nineteenth century the scientific study of microbiology began, and just because, the scientific procedure of fermentation was comprehended. several classifications have been utilized to sort the assorted exhibit of the fermented nourishment produced dependent on various microorganisms, and food types, and kinds of fermentation included.

The microorganisms associated with fermentation process fall into three classes: bacteria, yeast, and molds. Yeasts are the principal microorganisms for the fermentation of breads, whereas molds is mainly used in processing of cheese and legumes. Bacteria is included only of the fermentation of cereal product. cereal and tuber fermentation are a lactic and acetic acid producing bacteria. yeast is a piece of mix microbial fermentation by bacteria in weaning food; all the more frequently, be that as it may, alcoholic fermentation of yeast may not totally alluring. Four genera of lactic acid producing bacteria are recognized as overwhelming cereal fermentation to be specific, Lactobacillus, Leuconostoc, Pediococcus, and Lactococcus spp. all of which require carbohydrate for the energy. Lactic acid and other natural acids produced from hexoses bring down the pH from about 6.5 to about 3.6. In the event that the pH is beneath 4.0, fermented product retard the growth of pathogens and along these lines ensure fermented items.

1.1 Introduction

In India Agriculture was practiced formerly on a subsistence level, the villages were self sufficient people exchanged their goods and services within the village on a barter basis. With the development of means of transport and storage facilities, agriculture has become commercial in character; the farmer grows those crops that fetch a better price. Marketing of agri produce is considered as an integral part of agriculture, since an agriculturist is encouraged to make more investment to increase production. Thus there is an increasing awareness that it is not enough to produce a crop but it must be marketed. It involves buying and selling of agri-produce. In olden days the farmer sold his produce directly to the consumer on cash or barter basis. Presently it has undergone a series of transfers/exchanges from one hand to another before it reaches consumers. National Commision on Agriculture terms agricultural marketing as a process which starts with a decision to produce a saleable farm commodity and involves all aspects of market structure of system, both functional and institutional based on technoeconomic considerations that include pre & postharvest operations, assembling,grading,storage,transportation and distribution but as per ICAR it is the assembling,processing & distribution. Inadequacies of present Indian agrimarketing system being improper warehouses,lack of grading,standardization,inadequate transport facilities,presence of large number of middlemen,unregulated markets, inadequate market information and credit facilities etc. Characteristics of agri-products being seasonal and perishable has to be colleted from various places ,stored & marketed with proper price. Existing agri-marketing system in India refers to sale through money lenders, hats,mandies(wholesalers) or co-operative marketing. Improvement of Agri-market system refers to regulated markets,constructing warehouses, provision for grading,standardization of produce (seal of AGMARK) and Weights & measures, daily broadcast of market price and transport facilities, market surveys etc.

Objectives of book keeping

How much have we earned this year?

How much during the past year?

Is our business improving?

Also, how much cash do we have?

How much our customers owe us?

Pig farming is considered as a beneficial sector in India that provides avenues of fast economic growth for new entrepreneurs and socioeconomically weaker sections, due to high fecundity rate, better-feed conversion efficiency, early maturity, small generation interval, and minimum investment on housing and equipment. Pig farming has evolved into a semi-commercial enterprise using intensive farming practises, in addition to being reared through free range management. Pig farming provides money to rural impoverished people from the lowest socioeconomic strata. As a result, effective programmes to popularise technological pig rearing of meat producing animals with enough financial supplies are required to modernise the Indian pig business and advance the productivity of small sized rural pig farms. 

Identification of Diseased Animals

Detection of compromised pigs necessitates awareness and fast decisions about treatment, transportation, and/or culling.

Walking the pens daily to observe the pigs will aid in the early identification of healthy and unwell pigs. Before unsettling a group of pigs, try to assess them from afar. This allows you to assess their behaviour.

Check the pens for down or lame animals, watch for increased activity around the water or feeders, and listen for coughing or sneezing. Inspect the ventilation system for improper or poorly managed air quality.

Then, enter the pen area quietly and study the pigs individually utilising B.E.S.T. Method. This acronym stands for:

• Body
• Eyes/Ears/Nose
• Skin/Hair-coat
• Temperament.

4.1 Mustard

The principle oil yielding rape seed and mustard sp. cultivated in India are

4.1.1 Land Requirement

Select seed field on which the Brassica sp. was not grown in the previous season unless the crop in the previous season was of the same variety and was grown from certified seed. To avoid disease control it is necessary to fallow a 3-4 year crop rotation so that a given field is selected one in every 3-4 years. In addition select field should be well drained, leveled and suitable for Brassica cultivation.

Vermicomposting is the rapid aerobic non-thermophilic composting technique for decomposition of various biodegradable wastes using epigeic earthworms in comparison to other conventional pit or heap composting techniques. Earthworms fragment the half decomposed organic material, mix and promote microbial activity. Worm utilizes 5-10% of food for its body growth and excretes remaining portion as vermicompost. The action of earthworm is both mechanical and biochemical. Mechanical fragmentation of the half decomposed organic material to finer particles by earthworm in its gizzard helps to increase surface area of action by microbes and aeration inside bed. Biochemical action improves the enzymatic digestion, nutrient enrichment and change in organic and inorganic contents.

Chapter Overview

This chapter provides a comprehensive understanding of the intersection of gender and animal husbandry, emphasizing the influence of culture, society, and history on our perceptions of gender and sex. It explores the interconnectedness of these concepts and their significance in shaping roles and expectations of the members of a society in livestock production. This chapter delves into the complex concepts of gender and sex, shedding light on their intricate nature and exploring their implications for animal husbandry.

8.1 General Description

Based upon ethnic values and culture, both private and common property land tenure regime is found in existence in the shifting cultivation system. In Odisha state of India, shifting cultivation locally called as podu, there exists both private and common property regime (Dash 2006). In case of Meghalaya state, while the private land ownership pattern does exist among the Khasi and Karbi tribes, the Garo tribes, on the other hand, resort to community land ownership pattern (Deb et al., 2013). Furthermore, an ethno-agrarian economy based on shifting cultivations is self-sufficient, and such shifting cultivators typically rely on outside sources for alleviation of their economic demands very infrequently, if at all (Gupta 1994). The use of human labour is the key input in the shifting cultivation system and the practice of mutual exchange of labour amongst these shifting cultivator communities is also not uncommon. In practices like harvesting, the groups of families join hands together to harvest the crop of each plot one by one. This practice of community labouring reduces drudgery and increases work productivity. During this harvesting time, it is said that farmers exchange their innovations and look at each other’s innovations as they work. Further, it is customary to arrange food and drinks by the family of the plot which is being harvested. The community recognizes these harvest periods as festive events which makes their work enjoyable. The case of village named Nawalparasi, Nepal, shows that shifting cultivators work in an innovative way in their community in which the part of the village land is set aside and is cultivated by the members of whole community jointly. The benefit they harvest from this area is used to fund for teachers’ salaries in community school (kerkhoff and Sharma 2006). Further, the close knit and kinship ties are not only necessary for labour sharing but also important for technology diffusion among the members (NAEB 2008). The division of labour exists between men and women. It varies from place to place. The Manipur shifting cultivation characteristics portray that the women predominate in seed selection and planting, weeding and other operations, the activities like cutting of the trees in jungle, clearing, burning are generally done by men Both men and women participate in harvesting of produce and so harvested produces are carried to the villages by head loading.

2.1 Tracing History of Casting
The manufacture of end products, viz. two-wheeler, four-wheeler, fan, washing machine, fridge, grinding machine, water cooler, etc., in companies requires many components. The components of these products have different shapes and sizes. Casting is a manufacturing process, which gives shape and size to a component of interest by pouring molten metal, which is in red hot state into a mould, which is designed such that its internal shape and size exactly match with the external shape and size of the component of interest. Casting is a very old art form that dates back thousands of years before the start of written history. Findings from the archaeological record show that the casting process was used more than 6000 years ago, or around 3000 BC. It is assumed that the moulds consisted of two pieces of pottery joined by a rope and featuring a hole to allow the molten metal to be poured into them. It is assumed that early hunting tools and weapons were made in this manner The Greeks and Romans made the casting process in artform to make bronze status, in which hollow wax has been used. Every component of a product was casted individually. The core of the mould was composed of clay and coated in wax. Next, a layer of clay was heated to melt the wax inside, and then the clay was heated once again to burn off any leftover wax. Melted metal was poured into the region where the wax had been removed once the mould was stable and ready, which is a process like contemporary investment casting. China started producing tools, bowls and many industrial items using casting around 1000 BCE. In specific, they produced farm tools and weapons. After several centuries, the casting process reached European counties to make gun, bullets, etc. With the advent of industrial revolution, the casting process became as a usual manufacturing process, what is seen today. Later, several metals, which are used in casting have been invented to produce high quality products with increased end of life for them. Over a period, metal casting underwent development. Casting procedures advanced quickly along with improvements in metal-heating and melting techniques. Gold was the first metal to be casted because of its low melting point and malleability. China made significant contributions to the development of casting when it discovered sand casting and iron, also referred to as pig iron.

Vegetables being good source of carbohydrates, proteins, minerals, vitamins and dietary fibers constitute important component of human diet. These are the cheapest source of natural protective food and increase the palatability. India is the second largest producer of vegetables next to China. Diseases are inherent component of agro-ecosystem, which must be dealt with continuous and knowledgeable basis. Diseases in the standing crop from the seedling stage until harvest and spoilage caused by microorganisms during transit, storage and marketing are major constraints in increasing production and availability of vegetables. At different stages of vegetable production, disease management requires several approaches, and it is more successful, if it is integrated into crop production system. Since vegetables are mostly grown year after year in the same fields especially near towns and cities, therefore, concerted efforts are required to manage the diseases. More than 300 diseases have been reported to occur on vegetable crops and it is beyond the scope of this chapter to discuss all the diseases. However, brief description of etiology, diagnostic symptoms and management practices being adopted are presented here for the economically important fungal and bacterial diseases of vegetable crops.

The purpose of a sub-surface drainage system is to lower the ground water table and removal of salts beyond the crop root zone. The ground water table may rise due to commonly practiced flood irrigation method, seepage from unlined channels, percolation of rain and runoff water and sub-surface flow from higher areas. Sub-surface drainage consists of drains laid at a specified depth, spacing and grade below the ground surface. The size, spacing and depth of drains depend largely on the soil-water properties viz. , infiltration, saturated hydraulic conductivity, drainable porosity; and the requirement of removal of water through drains in certain time period fixed on the basis of rainfall and crop cultivated. The drains are usually placed in a pervious stratum. Suitable filter of coarse sand and gravel may be used when it is placed in a low permeable stratum. Sub-surface drainage serves the important job of removal of concentrated salt solution from the crop root zone particularly in arid and semi-arid region.

Future areas of emphasis for research and scholarship in nematode ecology are indicated by pressing agricultural and environmental issues, by new directions in applied nematology, and by current technological advances. Studies in nematode ecology must extend beyond observation, counting, and simple statistical analysis. Experimentation and the testing of hypotheses are needed for understanding the biological mechanisms of ecological systems. Opportunities for fruitful experimentation in nematode ecology are emerging at the ecosystem, community, population, and individual levels. Nematode ecologists will best promote their field of study by closely monitoring and participating in the advances, initiatives, developments, and directions in the larger f ield of ecology. Some major concepts in ecology have been explored including the dynamics of species interaction, the relationship between complexity and stability in ecosystems and the characterization of organisms as “r” or “K” selected (Howard Ferris, 1993). There has been some application of concepts of plant-herbivore coevolution and density-dependent regulation of populations.

11.1 Introduction

Our Country is a fast developing nation for the overall development and has proved that the country which was known for a begging bowl for food grains has turned up towards self-sufficiency and also has excess production to feed the present level of population. From about 50 MT of food grain production in 1950-51, harvest in 2010-11 reached over 241 MT, highest ever along with high production of fruits, vegetables, milk, egg and fish. This increased food production in the country has mainly been achieved through productivity gains, as the net sown area has remained static for the last four decades.

5.1 Introduction

A steam can be defined as a flow channel in to which the surface runoff flowing over the land surfaces and base flow/ground flow flowing below the ground surfaces meet. It receives the total flow from a specified basin. Streamflow representing the runoff phase of the hydrologic cycle is the most important basic data for hydrologic studies. Interestingly, stream flow is the only part of the hydrologic cycle that can be measured accurately. Stream flow is a historical data and like rainfall and runoff, it is a stochastic hydrologic variable. It is also called as discharge or rate of flow. Discharge is defined as the volume of water flowing through a cross section in a unit time.

(+)sense RNA (plus-sense RNA)     :    A virus with a single-stranded RNA genome of the same polarity (‘sense’) as mrna.

1. TYPES AND GRADES OF IMMUNITY

The immune response, which has inherited the character of memory, as evinced by rapidity and specificity of the responses on the second exposure to antigen, was cleared the minds of scientists especially bacteriologists who could find certain cells especially lymphocytes to play a major role in immune response.
 
The fact that the blood also contains soluble protective substances both heat stable which were later known as antibody and heat labile, later called as the complement system. These two were regarded as totally separate phenomenon in the beginning years. Eventually the distinctions between specific and non-specific responses were understood.
 
There are two types of immunity
    i)    Non-specific (Innate, natural or native) immunity
    ii)    Specific (Acquired) immunity.

15.1 Section-A : Write True / False

Q.1 In bivariate distribution if the change in one variable afects a change in the other variable, the variables are said to be correlated.

Q.2 If the change in both the variables takes place in the same direction then the variables are said to have a positive or direct correlation.

Q.3 The pair of variables say, Income and expenditure in house hold or the height and weight of a group of children possess the direct correlation between them.

Q.4 If the change in both the variables takes place in oposite directions, then the variables are said to have "Negative or inverse" correlation.

Q.5 The pairs of variables say (i) Price and demand of a commodities or (ii) Volume and pressure of a perfect gas" have a negative correlation.

Q.6 The two variables are said to have a perfect positive correlation if the deviation in one variable is followed by a corresponding and proportionate deviation in the other variable.

Q.7 There are some funny combinations of variables between which the correlation are said to be "spurious or nonsense".

Metabolism - sum total of all chemical reactions in living cells

Catabolic reactions - degrade macromolecules and other molecules to release energy

Anabolic reactions - used to synthesize macromolecules for cell growth, repair, and reproduction

Can divide metabolism into 4 groups: carbohydrates, lipids, amino acids, nucleotides.

Rural development programmes are created and maintained for influencing people to make changes in their way of living and of making a living. The existence of such programmes implies that the present situation of the rural people is not what it should and could be, that something different should prevail, and that it is possible through appropriate action to attain a more desirable status for them.

Changes that are important to people are those that help them to meet their needs for biological, economic, social, aesthetic and moral well being. Basically, all programmes for rural development exist to help people to meet their needs. If programmes do this people have their free choices in societies and will not participate for long periods in them. The element of people’s needs, therefore, becomes a central concern of planner for rural development. Hence, the entire process of planning for rural development implies a need for change. But now the question arises that change from what, to what, by whom, where and by what methods?

The society has to find ways to adjust itself so that people meet their needs for an improved economic status, for being more useful citizens and for enjoying a higher degree of social stratification, it must identify these conditions and plan realistically to achieve them. It is the prime concern to identify that what needs do people have ? How can needs be identified? What plan of priority should be set up for meeting people’s needs? What resources are necessary to meet people’s needs? How should resources be organized and directed to help people’s meet their needs? These questions give the key orientation and justification for rural programme planning.

18.1 Introduction

The Packaging Institute International describes packaging as the enclosure of items, packages or products in a wrapped pouch, box, bag, cup, can, tray, tube, bottle or other container for protection, preservation, containment, communication, performance and utility. To an engineer or a scientist, it is technical matter as it is a system designed for efficient delivery of safe food products with high quality, via each and every stage of distribution chain, from production of raw material to food manufacture, packaging, retail, wholesale, consumer, disposal and finally recycling or of resource resurgence. The extent of food packaging is literally broad as it encompasses technological activities such as graphic and machinery design, package manufacture and development, shelf life testing, distribution and marketing. Food packaging science is a discipline which applies principles from four major areas of science (materials science, food science, information science and socioeconomics) to understand the properties of packaging materials, packaging requirements of foods and the packaging system. Both material science and food science have been two major contributors for food packaging development. Material science is important to understand the mechanical strength, barrier properties, appearance and physical and chemical properties of paper, glass, metal, polymer and composite. Food science is important to understand the deterioration kinetics of foods (such as microbial growth, lipid oxidation, moisture loss or gain) governs the food shelf life. Food packaging technology is a science based solutions to address specific food packaging needs; examples are tamper evident packaging, microwavable packaging, modified atmospheric packaging, and controlled atmospheric packaging which are aimed at enhancing safety, quality and convenience for the consumer.

1.1 Some Useful Formulas Related to Farm Machinery

6.1 INTRODUCTION

Besides simple analysis, GIS is useful to do advanced analysis like network analysis, spatial analysis, 3D analysis and modeling. Different softwares are available to perform such analysis and the above mentioned analysis is done in separate modules of the softwares.

6.2 NETWORK ANALYSIS

Network consists of well connected linear features. Roads, railway line, water distribution system, sewer line, streams are some of the examples of networks. These networks consists of nodes and arcs with designated directions and connection with other linear features. Networks are topology based with attributes for the flow of objects like traffic. Road network will be considered for explaining network analysis.

Road map is digitised with nodes and arcs. Signals, accidents are represented as points. Road is represented as line and two or more roads intersect at nodes. Attributes are added to the nodes and lines. Dynamic segmentation model is used for network analysis. It is built on lines of network. In road network analysis, attributes for travel time, one way street, two way street, right turn, impedance are added to the nodes and arcs. A link is the line running between two nodes. Link impedance is the cost of passing through the link. Travel time is different in links in cities due to varying traffic at different locations. Time taken to pass through a known length of link may give the cost but the travel time in a link is not uniform because of varying speed designated in the link as 20 km per hour and 30 km per hour. Hence it is important to consider the length of link and also the travel time. If the speed limit is 20 miles per hour for a length of 2 miles, then the travel time is 6 minutes (2/20x60 minutes). Also tuning in the network is considered. A road may have a maximum of 12 possible turns excluding U turns. There are right turn, left turn, straight way for each road. Also U turn is possible. This turning takes different time depending on the signal. Straight way takes less time but left and right turn may require some more time. If signals is available then signal time should also be taken into account. Fig 6.1 show the possible turns in a road.

12.1 General

The term “biomass” generally refers to renewable organic matter generated by plants through photosynthesis. Materials having organic combustible matter is also referred under biomass. Biomass is an important fuel source in our overall energy scenario. Biomass is produced through chemical storage of solar energy in plants and other organic matter as a result of photosynthesis. During this process conversion of solar energy in sugar and starch, which are energy rich compounds takes place. The chemical reaction of photosynthesis can be written as:

6CO₂ + 6H₂ O + sun light → C₆ H₁₂ O₆ + 6O₂ + 636_kcal

It indicates that the storage of 636 kcal is associated with the transfer of 72 gm carbon into organic matter. Biomass can be directly utilized as fuel or can be converted through different routes into useful forms of fuel. In fact, biomass is a source of five useful agents, which start with `F’ like Food, Fodder, Fuel, Fiber and Fertilizer. Further, biomass has many advantages like.

1. Introduction

Plum is one of the important stone fruit crops of temperate region throughout the world. The Japanese group of plum is native to China but was domesticated in Japan and subsequently was introduced to different parts of the world. In India, Japanese plums were introduced by European settlers and missionaries around 1870. Plum grows well in areas ranging from 900 m to 1600 m above mean sea level.

1.1. Uses

Among deciduous fruits, plum is widely distributed in the world, because of wider adaptability among different species and cultivars of plum to varied agro-climates and soil conditions. Plum is consumed as dessert, dried and processed products. Plum fruit is considered best to overcome the jaundice. Its fruit use for a preparation of juice and squash. It ranks next to peach in commercial production. It is widely cultivated in several countries in Europe, Asia and in the America.

I. General information

1. Shrub is a woody or semi-woody perennial plant with little or no trunk and grows up to a height from 50 cm to less than four meters.
2. Shrubbery border is an area of the garden devoted exclusively for growing shrubs planted in a row of rectangular fashion.
3. Plants suitable for shrubbery border.

Defining-Commercial Plant Breeding

The term commercial plant breeding originates by putting prefix ‘commercial’ before ‘plant breeding’ and is used as an adjective to plant breeding which surely is a noun. Naturally, commercial plant breeding remains largely plant breeding with slight twist that commercial plant breeding aims at delivering commercial products to be delivered to the end users that is the farmers as per the need of the consumers/markets. Thus, the farmers plant those products (open-pollinated cultivars and hybrids) which are easily accepted by the consumers and which are easy to be handled by the traders as the products reach to the traders and then from traders to the retailers and ultimately to the consumers. Along with consumers’ acceptance, these kinds of products must meet certain level of yield, maturity and resistance/tolerance to diseases and pests. Accordingly, these are designed and bred by the commercial seed companies which operate as per demand of the markets. Private seed companies operate on a business model and generate their own revenue to keep the companies running and therefore these seed companies are bound to design and breed commercially viable products. Thus, all plant breeding activities which occur at the research farm and laboratory of private seed companies aimed at designing and delivering commercially viable products are called as commercial plant breeding activities. While designing such project and running the plant breeding activities at the research farm and laboratories of the private seed companies, the emphasis has to be on ‘how to do’ and ‘how quickly to do’ rather than ‘why to do’. ‘Why to do’ issue is not totally ignored and this gets due consideration while formulating the research project based on extensive deliberations between various departments, namely, R&D, Sales and Marketing, Product Development, and Seed Production.

The term commercial plant breeding is generally not in use in public sector research institutes and the agricultural universities and certainly not in class room teachings and discussions while teaching courses on plant breeding and related courses under the domain of plant breeding. There the focus is on theory in contrast to applications which form the backbone of commercial plant breeding as practiced by the commercial organizations such as private sector seed companies which have to earn revenue by selling the products to meet the operational expenditure of running the companies and also to earn profit to run the activities of the company on long term basis in a sustainable manner and to invest in R&D. Therefore, a working definition of commercial plant breeding could be as follows.

4.1 INTRODUCTION

All soil components contribute in some measure to cation exchange. The source, extent, and quality of the contribution of each to the cation exchange capacity is varied and complex. Ocasionally, reactions between components alter the extent and quality of cation exchange. Also, in some this is strongly influenced by the pH of the soil-water complex, and the electrolyte content of the soil solution. Indeed, when ‘simple and rapid’ methods, empirical or allegedly fundamental in origin, appear in the literature, they must be viewed circumspectly. Mostly, they provide an incomplete, or a one-sided, picture of the phenomenon. To justify his invention, the experimenter usually provides correlations with other intrinsic soil properties (e.g. the concentration by weight and the mineralogy of the <2 jxm particles, the organic matter content, the surface area) or with the reaction of soil with its environment (e.g. plant growth and composition). However convincing such statistical parameters might be for the population of soils investigated, they do not help elucidate, and may indeed mask, the true extent and quality of cation exchange.

This chapter deals with current views on the sources, extent and quality of cation exchange, and with comprehensive methods for evaluating these. The relationship between the properties thus observed and values obtained from simple and rapid procedures is considered.

1. Which of the following states has nutrient use of < 100 kg/ ha?

(a) Madhya Pradesh                (b) Karnataka

(c) West Bengal                       (d) Uttar Pradesh

2. Which of the following is the leading state in maize production

(a) Bihar                                   (b) Uttar Pradesh

(c) Punjab                                (d) Gujarat

What is book keeping?
Book keeping    is defined as;
1. The art of recording business transactions (pecuniary transactions) in a regulator and systematic manner.
2. Book keeping is the science and art of correctly recording in books of  accounts all those business transactions that result in the transfer of  money or money’s worth.
3. Book keeping is an art of recording day to day business transactions in a  set of books in a most systematic manner.
4. It is the process of analysing, classifying and recording transaction in accordance with pre-conceived plan.

1. The first Director of IARI was ?????.
   1. M. S. Randhawa
   2. B. P. Pal
   3. M. S. Swaminathan
   4. G. Kalloo
2. In vegetable blanching is done for?????.
   1. Removal of microorganism
   2. To activate the enzymes
   3. To retention colour
   4. All of the above
3. Viviparous refers to?????.
   1. Germination of seed on mother plant
   2. Germination of seed in the field
   3. Germination of the seed on monoecious plant
   4. Germination of seed on any place
4. Sourness in radish is due to ?????.
   1. Isosinate
   2. Isothiocinate
   3. Anthocyanin
   4. All of the above

The income of farmers is declining day by day due to increasing cost of inputs including wages of farm labor. The net income can only be increased by reducing cost of inputs and by increasing yield of currently adopted cropping systems. The income of farm can be increased by growing horticultural crops (vegetables, flowers, fruits etc.) as well as medicinal, aromatic or spice crops. However, these crops cannot be grown on large scale due to their market problems and involvement of high labor. So, in order to improve profit from ongoing cropping systems, some latest crop production practices are being discussed in this chapter.

1. Introduction The chapter aims to bring out the potential benefits of radiation processing technology for value-addition of millets. How the radiation processing technology can be exploited for making millets as a popular staple food would be the central theme. The key focus is to establish if irradiation (the term generally used for radiation processing of any material) can be employed for making millets for different purposes relevant to farmers and consumers. In order to understand and prove, we would list out the challenges involved in developing the market for millets. The key points that need to be considered for this go-to-market strategy for millets are : a) Millet grains have a long shelf-life, much better than the popular grains e.g., rice and wheat, consumed worldwide, but millet flour shelf life is significantly much shorter.

8.1 Design of Canal Embankments

 There are two aspects of canal embankment design.

 (i) The general requirement, such as free board, dowel, service/inspection road, drainage of banks etc. The aspect of free board is discussed in Para

8.2 to 8.3 and that of service/ inspection road in Para

 8.4 and drainage of banks in Para 8.5 in this chapter.

 (ii) Safe design of embankment i.e. Hydraulic and structural requirement.

It includes stability of inner and outer slopes, Structural safe design of inner cut slopes in deep cuttings in different types of soils/rocks of varying nature and ground water conditions. Stability of slopes may include drainage, so as to prevent rock falls/debris in canal. For outer slopes in embankment (filling sections) hydraulic gradient/pharetic line, toe drains etc, similar to the earthen dams, on different types of soil/rock foundation with respect to varying ground water level conditions are important.

The canal embankments in filling may even fail through its foundations by sloughing or liquefactions. All these aspects of canal embankments are discussed in this chapter in Para 8.4 to 8.9.

Hyperaemia and Congestion
Definition
Hyperaemia is increased volume of blood in affected tissue or part.
Hyperaemia (Active Hyperaemia)
Occurs in arterioles or arteries
Increased blood flow in capillaries
Congestion (Passive Hyperaemia)
Occurs due to impaired venous drainage
Stasis of blood in veins
classification of hyperaemia

India, internationally recognized as the principal producer, consumer and exporter of spices globally, is often referred to as the spice bowl of the world. A total of 75 spices out of 109 are cultivated in the country, among which
pepper, cardamom, chillies, ginger, turmeric, coriander, cumin, and fenugreek are of significant importance. The approximate export of spices during 2021- 22 was 15,31,154 MT valued at 30,576.44 crore (US $4,102.29 million)
compared to 17,58,985 MT valued at 30,973.32 crore (US $ 4,178.80 million) during the previous financial year. Indian spices are exported to more than 180 destinations, with the leading importers being USA, China, Bangladesh, Thailand, UAE, Sri Lanka, Malaysia, UK, Indonesia, and Germany. The key spice-producing states of India include Himachal Pradesh (ginger), Haryana (garlic), Karnataka (pepper, ginger, cardamom (small), chilli, turmeric and garlic), Orissa (ginger, chilli, turmeric, and garlic), Kerala (pepper, chilli, turmeric, nutmeg, mace, and clove) and Rajasthan (coriander, chilli, cumin, garlic, fenugreek, fennel, and ajwain).
Seed Spices in Rajasthan Economy
Of the 75 spices grown in India, 20 are classified as seed spices, where the economically important part is the seed.

Practical applications and field techniques in spices breeding are essential for developing new varieties that meet the needs of farmers, processors, and consumers. These techniques involve a combination of traditional methods and modern technologies to select, test, and propagate spice plants with desirable traits. Here’s an overview of the key practical applications and field techniques used in spices breeding:
1. Selection and hybridization
• Mass selection: This traditional technique involves selecting the bestperforming plants from a large population based on desirable traits such as yield, flavor, and disease resistance. The selected plants are then propagated
to create the next generation.
• Hybridization: Cross-breeding different varieties or species of spices to combine desirable traits from both parents. This technique is used to create hybrids with improved characteristics, such as higher yield, better flavor, or
enhanced resistance to pests and diseases.
• Example: Cross-pollinating different varieties of chili peppers to produce hybrids with higher capsaicin content for spicier flavors.