eChapters

Vices of poultry are undesirable behavioural pattern manifested by the bird in the flock and spreads fast among the members resulting in financial losses.

Types of Vices

Pecking

Cannibalism

Egg eating

Water is the most important and abundantly required nutrient for poultry. A continuous supply of clean, fresh and wholesome potable water is essential for poultry. Poultry rearing is becoming more and more intensive with which the chances of the infectious diseases being sustained in the different flocks also increase. Consequently, the need for effective disease control measures to be adopted also gains further importance.

Most often, poultry farmers get alarmed only when the mortality level or death rate in a farm is high. However, even the existence of disease at a sub-clinical level may hinder the performance of the birds, in terms of body weight or egg number; such economic losses, sometimes relatively less and unnoticed, may mean the difference between success or failure in the poultry business. Treatment of a sick flock after the onset of any disease becomes costlier and more frequently impracticable. The recovered birds may not regain their production to original levels and may also continue as source of infection to other healthy birds. Hence, the adage ‘prevention is better than cure’ applies more to poultry industry than any other field.

Biosecurity means protection against infectious biological agents. These agents include bacteria, viruses, protozoa, fungi, parasites, and any other agents capable of introducing infectious diseases into a poultry flock. Biosecurity therefore means maintaining a flock, poultry house or premises in such a way that infectious agents do not have a chance to enter to cause diseases. The biosecurity may be categorized into three: Conceptual biosecurity, Structural biosecurity and operational Biosecurity.

Importance of Biosecurity

In modern poultry production, birds are reared under intensive system where large numbers are concentrated in small area. As a result, when an infectious agent enters a poultry house, there is probability for widespread dissemination if it is not contained. Besides, the broiler and egg industry of today is under increasing consumer and regulatory pressures to guarantee food safety and meet export requirements. As a result, broiler and layer operations around the world require the supply of breeding stock free of salmonellas specific to avian species (such as S. pullorum and S. gallinarum) and those that could cause outbreaks of human food-borne illness. Inadequate biosecurity can contribute to wide epidemics of highly pathogenic or exotic diseases. An infection by a virulent organism within a facility can be devastating, reducing without overt signs of disease. Once contaminated with pathogens, poultry facilities are extremely difficult and expensive to clean, sanitize and disinfect. Prevention of disease is always less expensive than treatment. The cost of implementing biosecurity system is smaller when compared to financial profit that can be made from production. Good biosecurity is therefore vital requirement in the best possible control of disease.

For maximization of productivity in any kind of poultry venture the knowledge on the behaviour of birds and its application play very significant role. Behaviour is the reaction of the whole organism to certain stimuli, or the manner in which it interacts to its environment. Behavioural patterns are not inherited as such, but develop through the process of growth and get differentiated under the influence of genetic and environmental factors. Primary function of behaviour is to enable the bird to adjust itself to some changes in condition, whether external or internal. Most animals have a behavioural pattern which can be tried out in a given situation and in this way they learn to apply one or the other according to that which produces the best adjustment.

Digestive System and Digestion in Chicken

Studies on structure and functions of digestive system of chicken play important role for their nutrition and feeding. Functions of each part are given below (Fig 35):

Mouth: Birds feed through the beak. The horny upper and lower mandibles form the beak. Lips, teeth, cheek and soft palate are absent. The dagger-like tongue helps to force the feed into the esophagus. Chicken has 24 taste buds with high sense of taste. Absence of teeth makes the particle size of the feed important.

Esophagus (Gullet): It is made of loose fibrous tissue and serves as a tube to pass the food from mouth to crop. This is relatively long because of the long neck of the fowl.

Crop: (Ingluvius): It is a pouch like structure of esophagus to store, moisten and soften the food. It gives information about the feeding habits of the fowl.

Proventriculus (Glandular stomach or True stomach): It is an enlarged glandular ovoid structure of the esophagus connected to gizzard. It secretes pepsin and Hydrochloric acid.

Gizzard (Muscular stomach): Disc shaped muscular organ with two pairs of strong thick muscles and lined internally with a thick horny epithelial covering called the Koilin layer. Coarse materials are ground well by its powerful contractions with the support of the grit that birds consume.

Common Poultry Diseases

Infectious diseases

Bacteria

Commonly known as “germs”, bacteria are very small living microorganisms. Only a few bacteria cause diseases. In birds these include Salmonella, Clostridia, Pasteurella, Vibrio, Staphylococci, Streptococci, Mycoplasma, Hemophilus, and Mycobacterium etc.

Chicken’s eggs have been used as a food item by human beings since antiquity. The egg is composed largely of the proteins out of the three most important dietary essentials (proteins, fats and carbohydrates). The egg proteins are highly digestible and remarkably complete, containing the most important essential amino acids. The amino acid profile of egg is similar to the ideal balance of amino acids needed by humans. It also supplies various minerals, some in significant amounts, and contains a range of vitamins. The nutritive excellence of the egg enhances the value of any food in which it is incorporated. Meeting consumer demands is a constant challenge for the poultry industry. Present day consumers desire somewhat distinct products with respect to safety, healthfulness, freshness, taste, color, etc. To remain competent, various companies have developed several designer and specialty eggs which have appeared in supermarkets.

Breeder management includes pure line management, parent stock management, and grandparent stock management depending on the context. Except for small variations in management among these stocks basics are common within layer breeder stocks and broiler breeder stocks. The main objective of the breeder management is to produce more fertile eggs per pullet and increasing the hatchability by hygienic handling of these fertile eggs.

Location of the breeder farm

Location of the breeder farm should be away from commercial poultry farms in order to prevent the spread of diseases between the flocks. However, they must be in close vicinity of the city/town to have a good transport facility and other amenities such as water, electricity and availability of labour.

Artificial insemination (AI) is the deposition of the semen or male germ cells (spermatozoa) in the female genital tract by artificial means (instruments). Artificial insemination includes collection of semen from the male, preservation, handling and deposition into the female reproductive tract hygienically replacing natural mating by a male. In India this technique is gaining momentum in chickens due to improved animal husbandry practices and economic considerations, initiated by IVRI, Izatnagar and JNKVV, Jabalpur. In many parts of the world, turkey, ducks, goose and guinea fowl are bred solely by AI. Chicken species are endowed with the behaviour and capacity of each male to mate several females and also 25 to 40 times a day. Further, the process of ovulation in birds is almost daily and stimulated by intensity and duration of light.

In modern poultry managemental practices of using cages, environmentally controlled houses and breeding and hybridization techniques employed for developing highly economical chickens, selection for faster growth and heavy body weight in broilers, which has led to loss of fertility and hatchability and use of dwarf female parents in broiler industry have demanded the use of AI in poultry.

Principles of Incubation

Incubation is a process by which the embryo within egg develops into a fully formed chick capable of breaking free from the shell. Basically, when a hen incubates an egg, it means she is on the egg in order to keep it warm for a certain period of time, 21 days for chicken, until the chick embryo has fully formed and is ready to hatch. The incubation period in other species is given in Table 41. The following factors affect the incubation on egg

1. Temperature

Incubator temperature should be maintained between 99 and 100 oF. The acceptable range is 97 to 102 ^oF. Overheating is more critical than under heating. An incubator should be operated in a location free from drafts and direct sunlight. Temperature is probably the most important single factor influencing the development of the embryo. A higher temperature will advance the hatch and a lower temperature will delay hatch. Younger embryos are especially susceptible to high temperatures because the upper lethal limit is very close to the optimum incubating temperature. High temperature will cause the embryonic membranes to dry out too soon. Chicks that hatch may have an unsteady gait.

Veterinarians will be often required to mention the specific animal husbandry terms for various purposes like writing certificates for various schemes, postmortem, attending court of law in veterolegal cases etc. Hence this chapter aims in refreshing the vets with the common terms associated with different domestic animals and animal husbandry activities. 

1    Dental formulae and eruption of tooth

2    Ageing based on rings of the horn

3    General appearance of animal

4    Longevity of different animals

1    Ruminants
2    Canines

The selection of right dog for the required purposes like watching, hunting, guarding, showing, companionship and even animal associated therapies nowadays, warrants a detailed information on various dog breeds, like physical and other specific characteristics which may be different to each other. This  chapter  gives important characteristics of dog breeds and guidelines for buying a pup.

The basic knowledge of normal physiological values in different animal species is essential for selection of the animal, diagnosis of any abnormality if any and its correction. The chapter provides the normal physiological values viz temperature, pulse, respiration etc in different domestic animals.

1    Normal haemotological values

2    Blood biochemical values

The different biochemical values serve as an indicator of the correct health status, viz important organ functions,  the alteration in values if any, helps in identifying the specific organ damage and exact diagnosis of the  abnormal health condition or disease. Some of the important biochemical values of the animals, which may assist in diagnosing the specific disease  conditions are listed in this chapter.

The  information on normal reproductive traits in domestic animals like calving interval, age at first calving etc, is essential for getting the maximal reproductive efficiency of the animal by the farmer. It also helps in improving the reproductive efficiency of the animals by different required means viz nutrient/mineral supplementation, antibiotic, hormonal therapy etc.

The table gives the approximate date of parturition, based on the date of breeding/mating in the year as a easy ready reference table.

1    Vaccination schedule for cattle and buffaloes

2    Vaccination schedule for sheep and goats

3    Vaccination schedule for dogs

4    Deworming schedule for dogs and cats

5    Vaccination schedule for poultry

6    Vaccination schedule for broilers in different seasons/situations5

1    Disease diagnosis based on posture, gait appearance and clinical signs

1    Bovines

2    Canines

Fluid therapy plays an important role in emergency and critical care of  the malnourished, anemic, unhealthy and debilitated animals and as a supportive therapy in various disease conditions, accidents etc. The type, rate and quantity of fluids indicated for common abnormal conditions  in various animals are dealt in brief in  the following chapter.

Drugs acting on alimentary system

Drugs acting on respiratory system

Drugs acting on urinary system

Drugs acting on genital system

Drugs acting on musculoskeletal system

Antineoplastic drugs

Antimicrobials

Antifungal

Antiprotozoal

Anthelmintics

Some of the Homeopathic remedies followed for common disease conditions of animals are listed in brief in the following chapter.

The usage of different pure chemicals and their combinations in treating various disorders of the livestock has been listed in this chapter.

The drug action can be adversely affected by the presence/concomitant administration of another drug/ agent, may be inhibiting its absorption, metabolism or excretion. Some of the drugs are incompatible with IV fluids, resulting in their inefficacy. The important drug interactions to be taken into consideration while administering a drug, are tabulated in this chapter.

1    Common diseases affecting livestock

2    Disease information

3    Diseases of skin

4    Diseases of muscuoskeletal system in canines

1    Large animals

2    Canines

3    Suggested antimicrobial/antifungal agents for intra-uterine administration

4    Commercial preparations of hormone(s) and recommended dosage protocol in cows

5    Drugs safe & contra indicated in pregnancy

1    General line of treatment of poisoning in animals

2    Systemic antidotes-dosage and method of treatment large animals

3    Small animals

4    Plant toxins

5    Zoo toxins

1    Ideal surgical pack

2    Nerve blocks

3    Commonly used pre-anaesthetics and anaesthetics

1    General post mortem examination and detection of date and time of death

2    Pathogenomonic lesions of different diseases

3    Livestock insurance

4    Pet-dog insurance

Laboratory investigation of the samples assist in diagnosing, confirming the cases including veterolegal cases. The type of material, quantity of specimens & preservatives used and the method of dispatch to the laboratory  is tabulated in this chapter.

1    Consent form for surgery

2    Consent form for euthanesia

3    Slaughter certificate

4    Wound certificate

5    Proforma for export certificate of dogs

1    Suggested fodder species for different regions

2    Package of practices for cultivated fodder crops

3    Estimation of agricultural by-products

Andrology is a branch of reproductive physiology that deals specifically with the study and treatment of male animals including humans. The study of reproductive physiology started with Aristotle around 350 B.C. in his book entitled Generation of animals, who believed that, the fetus arose from menstrual blood. He had no way of observing spermatozoa in the ejaculate or the beginning of embryo development. He assumed that, menstruation did not occur during pregnancy and the fetus was derived from menstrual blood. He also proposed that, the conversion of menstrual blood to a fetus was initiated by seminal fluid deposited in the male during copulation. Aristotle also assumed that, the testes were just like pendulum weights that kept the transport ducts from becoming kinked or plugged with seminal fluid. He has no research tools and his speculations were not very unreasonable. Later, a Dutch scientist named van Leeuwenhoek who developed a simple microscope made a major breakthrough in the study of reproductive physiology. Leeuwenhoek observed semen and discovered that it contained small particles that moved about and he named moving particles as ‘Animalcules’ and published a paper in 1677. The speculation was that the animalcule contained a fully formed individual within their cellular confines. Sperm head was thought to contain a microscopic yet fully formed individual. Later, Dumas concluded that, the animalcules now called spermatozoa were responsible for uniting with the ovum and producing an embryo. Over 2000 years elapsed from the speculations of Aristotle until it was understood that the spermatozoa from the male required for fertilizing ova from the female.

Puberty and sexual maturity

Puberty is defined as the age at which reproductive function is initiated in animals. This corresponds to changes in hormone levels and the ability to function sexually in order to reproduce. The puberty is the period when the sexual organs are functionally developed, libido is prominent and the male is able to produce the spermatozoa and is able to copulate resulting in pregnancy. The onset of puberty is a gradual process and occurs after achieving optimum body weight, which is influenced by plane of nutrition, genetic differences, management practices, breed, diseases and individual differences.

Sexual behavior

The pattern of courtship, display, motor activities and postures are directed to bring the male and female gametes together to ensure fertilization and pregnancy. The components of copulatory patterns are sexual arousal, courtship (sexual display), erection, penile protrusion, mounting, intromission, ejaculation, dismounting and refractoriness. The duration of courtship and copulation varies with the species both events are shorter in cattle and sheep than in swine and horses. The males sniff and lick the genitalia of female are more common and an important way of chemical communication through olfaction. Except in swine, the males smell the female’s urine and then raise head, with lips curled, in the ritualized “Flehmen’s reaction”. In sheep, goat and cattle, tactile stimulation of the female is made by nuzzling and licking the perineal region, whereas with the horse, the stallion often bites the female’s neck and in swine, the boar noses her flanks.

Infertility or reduced fertility in male animals particularly in bulls had considered being a rare occurrence, but now infertility in males is being considered a common and severe problem. Still there is lack of information concerning the male’s infertility.

Reduced capacity or incapacity to fertilize by males/Impotentia generandi: Fertility is the normal functioning of the testes, accessory sex glands and ducts to deliver sperm of normal quantity and quality. Infertility or sterility in males is usually characterized by normal sexual desire and the ability to copulate and ejaculate but a complete or abnormally high percentage of failure of fertilization or conception. It may be seen when semen is normal on examination and on the other hand, the semen is abnormal in sperm morphology, concentration, motility and other qualities.

Miscellaneous causes of male infertility 

1. Failure of proper delivery of semen into the vagina

It may be secondary to lacerations of the ventral caudal portions of the glans penis with a fistulous opening of the urethra ventrally. In such case, at the time of ejaculation, neither semen is deposited in the middle portion of the vagina nor sprayed over the cervix. In addition, it is observed in rams following necrosis of most of the urethral process secondary to urinary calculi or lacerations or injury.

Advantages and limitations of artificial insemination

Artificial insemination is the first great biotechnology applied to improve reproduction and genetics of domestic animals. Artificial insemination includes the collection of semen from the male, semen assessment for quantity and quality, dilution with extender, preservation and then insemination. Artificial insemination (A.I.) is a breeding technique where semen with living sperm is deposited into the reproductive tract of a female who is in estrus by use of instruments. Artificial insemination is the most important single technique widely used worldwide to upgrade the genetic makeup of the farm animals. Artificial insemination can be performed in most of the domestic animals like cow, buffalo, mare, sow, bitch, queen cat, lambs, does etc. Due to invention of frozen semen technology, the extended semen doses can be preserved for years together and permit wide spread use of superior germplasm. Artificial insemination is a powerful tool mostly employed for livestock improvement. The advantages and limitations of frozen semen technology are enlisted below:

Semen collection in bulls and buffalo bulls

Semen collection from domestic animals is an art and skilled job to get maximum quantity and quality of an ejaculate. Ejaculation of semen in a male is a complex process and consists of several events sexual arousal, courtship, erection, penile protrusion, mounting, intromission, ejaculation, orgasm like reaction and dismounting. Ejaculation is the result of neuro-muscular stimulation that starts in the vas differentia and accessory sex glands. The semen ejaculation is finally brought about by the rhythmical contractions of penile musculature and urethra. The muscular contractions proceed progressively in waves, forcing the semen out of the external urethral orifice. To get good quality semen, the bulls must undergo all the related events of ejaculation. The semen collectors should have knowledge of inhibitory and stimulatory factors for the act of ejaculation in male domestic animals. The stimulatory factors are:

Semen evaluation alone should not be interpreted as the sole indicator of the fertility of bulls but it will provide significant information of the sexual apparatus. After receipt of the semen sample in the laboratory, it is kept in a hot water bath at 350C until the evaluation is complete. One has to prevent cold shock to the living sperm cells during the evaluation process. All the glassware and other items coming directly or indirectly in contact with the sperm cells should be sterilized properly and kept ready in a thermostatically controlled cabinet at body temperature. Sudden changes in exposure of semen to cold or hot temperature results in higher dead spermatozoa or sperm agglutination. Semen should not be exposed to sunlight, wind, chemicals, smoke, vibration and water. A single laboratory test is not sufficient to assess the semen quality and semen should be examined within a shortest possible time after ejaculation as mentioned below (Table 9.1).

Microscopic examination 

A phase contract microscope with biotherm (37o C) is necessary for correct evaluation of semen because the refractive index of spermatozoa differs slightly from that of the surrounding medium. The ordinary bright field microscope will not provide sufficient contrast between the spermatozoa and the medium. Under phase contrast microscope, the object will appear dark on a bright background. This is achieved by reducing the light passing through the object by half a wavelength compared to the light passing through the medium. The eyepiece has a magnifying capacity of 10X while the objectives have 10, 40 and 100X. This will provide the microscope the magnifications of 100, 400 and 1000. The lenses and eyepiece should be kept clean by wiping with tissue paper and distilled water. Xylol can also be used to remove greasy material. The microscope has to be kept in one place and covered with Perspex cover when not in use to avoid dust accumulation. Personnel familiar with the operation of a particular microscope alone should be allowed to handle the microscope, since lot of differences exist between different makes of microscopes. 

Good quality semen is more acidic than semen with lower sperm concentration. In contrast, bacterial contaminated semen and semen with more dead spermatozoa evolve ammonia that will increase pH of semen. In orchitis, seminal vesiculitis and epididymitis the pH of semen will be alkaline due to presence of pus. In azoospermic or necrozoospermic semen, the pH may be neutral or alkaline. pH variation may be due to change in season/climate and frequency of successive ejaculates. Depending on the concentration and activity of spermatozoa, the pH of semen varies. The narrow range pH (BDH) paper are more convenient in routine work. The first change in color is matched with color on the cover of booklet. Use of BDH capillary set is time consuming whereas digital pH meters are also being used. The normal pH range is depicted in Table 11.1.

Semen is admixture of secretions of testes containing spermatozoa and accessory sex glands. Spermatozoa are formed in the seminiferous tubules of the testes. The tubules contain a complex series of developing germ cells that ultimately form the male gametes. The spermatozoa are unique type of cells containing nucleus (head portion) and a tail. The acrosome is a double walled structure situated between the plasma membrane and the anterior portion of the sperm head and neck connects the sperm head with its tail.

The idea behind semen dilution is to extend its volume without affecting its fertility so that many females can be bred from an ejaculate. The basic components of semen extender are Tris buffer, fructose, glycerol, egg yolk and antibiotics.

The semen storage technology and glass ampoules were earlier developed in USA and French, Danish and West Germany introduced straw technique and in the mean time Japanese scientists developed pellet freezing method. 

1. Ampoule method 

The diluted semen is filled in ampoules after labeling, sealed, frozen and preserved in liquid nitrogen. For insemination, the ampoule is thawed in warm water of 37^ºC until liquidation then ampoule is cut and semen is drawn into glass catheter with the help of a sterile syringe and used for insemination. In this method, semen may not be contaminated and identification of semen is easy. However, the semen is frozen in a larger volume so the freezability and fertility are less and it requires more storage space in cryocan. About 8-10% of semen is lost while thawing, loading and insemination.  Use of glass catheter for insemination is risky because chances of breaking and chances of injury to cow or inseminator and passing of catheter in the cervix.

1. Preparation of diluents 

The diluent is prepared one hour before semen collection so that it is stabilized. The diluent is prepared by mixing the ingredients and kept ready in water bath at 30oC. One of the diluents is detailed below