eChapters

Abstract

Insect pests, fungi, bacteria and other injuries are found in all types of environment and affect the growth, production and survival of both plants and animal species in one way or other. Similarly a large number of insects belonging to different orders, families and genera feed on pods and seeds in natural/ during storage and cause injuries. Regeneration failure in several broad leaved and conifers in India and other countries by heavy insect attack in the natural stands at the time of inflorescence and seed formation and on the ground after seed shedding causes heavy loss to number of afforestation programmes. Several methods like chemical, cultural, natural and biological are available for reduction in loss caused to seeds by insects. Generally, earlier the control measure, the smaller the destruction. Forest seeds can be stored safely by taking some precautions before their final storage, viz. inspection of the seeds for their moisture content, visual examination of cleaning method, scanning through soft X-ray technique, thermotherapy or treatments with chemicals, etc. The present chapter has covered review regarding damage caused to seeds by different insect pests and their management options.

Vegetables
Peas
1. Rust
Pathogen
Uromyces fabae (Pers.) de Bary
Symptoms 
The fungus produces characteristics rust pustules on the host. Pustules are mostly found on the leaf blade, though often they may be found on the petiole and stem of pea plants. The sori are small, roundish, open, and powdery as well as brown coloured. In severe infections, the leaf may wither, resulting in considerable damage to the crop. As the plants near maturity, the fungus produces the telial stage on the host.

Plants have been a major source of therapeutic agents since time immemorial. The increasing acceptance of traditional herbal systems of medicine, like Ayurveda, within India and outside has resulted in the revival of ancient traditions of medicine. Medicinal plants and their derivatives are thus looked upon not only as a source of affordable healthcare but also as an important commodity item of international trade and commerce. As per World Health Organization estimates, traditional medicines, mostly plant drugs, cater to the health needs of nearly 80% of the world population. The medicinal plant related trade is growing rapidly every year due to the growing recognition of natural products being non-narcotic, with relatively less side effects and being easily available at affordable costs.

In India, medicinal plant sector has traditionally occupied an important position in the socio-economic, cultural and spiritual arena of rural and tribal lives. About 8000 flowering plants, 650 lichens, 650 algae, 200 pteridophytes and 150 bryophytes are attributed with medicinal properties. The Indian coded systems encompasses a large number of treaties on recognized systems of medicine viz. Ayurveda, Unani and Siddha. The Ayurvedic system of medicine, which cater to the health needs of a major segment of population currently utilizes as many as 1000 single drugs and over 8000 compound formulations of recognized merit. Other systems of medicine viz. Siddha, Unani and Amchi (Tibetan) systems of medicine together utilize about 1800-1900 medicinal species. Many medicinal plants are the source of clinically useful prescription drugs being used in modern systems of medicine. Also incredible knowledge on phyto medicine is acquired in non-coded form by tribals and rural community, as is clear from evidences related to folklore medicine. Recognizing their importance, medicinal plant sector has been identified as one of the key areas by the Government of India and the Department of Indian System of Medicine and Homeopathy.

Seed is the most important component for productive agriculture. Significant advances have been made in production of food crops in India during the last four decades. The quantum jump in the food production primarily accounted for by increased productivity and production in rice and wheat was the result of introduction of improved varieties and their seeds often nicknamed as Green Revolution. The food production which was nearly 50 million tones during 1950 – 51 reached to a level of 210 million tones during 2003 – 04. During the same period the productivity increased about 3 folds (Table 20.1).

Hybrid Rice

People’s Republic of China announced the successful development and use of F1 rice hybrids in the late 1970s. The first hybrid rice combinations were put into commercial production in China in 1976. Since then commercial exploitation of hybrid rice attracted the attention of researchers around the world. It is accepted that about 20% yield advantage of hybrid rice would be usually required to meet the extra cost of seed production and the future rice demands of a growing world population. Realizing the prospects of hybrid rice, IRRI intensified research on this and organized an ‘International Symposium on Hybrid Rice’ on 6-10 October 1986 at the Hunan Hybrid Rice Research Centre, Changsha, China where Prof. Yuan Longping and his co-workers had made their names in development of hybrid rice. The proceedings were brought out in form of a book entitled ‘Hybrid Rice’ in 1988 by International Rice Research Institute, Philippines. This book documents the information exchanged, and presents for the first time, in English, much of the Chinese literature on hybrid rice.

Many developing countries, for example India, China, Thailand, Brazil, Mexico, Egypt and South Africa, utilise the so-called modern biotechnology, based on genetic engineering and genomics. Agricultural biotechnology is the most widespread biotechnology in developing countries, but only a few of them are able to carry out all of the research and development activities leading to the commercialization of genetically modified seeds. These include basic research in molecular and cell biology and genetics, greenhouse and field trials according to  internationally agreed biosafety standards, risk assessment and management, respect for intellectual property rights relating to the transferred genes and to the creation of new crop varieties, production of genetically modified (GM) seeds by private corporations or working in cooperation with the public agricultural research sector, extension activities aiming at delivering the new seeds to the farmers and biovigilance in the fields of GM crops so as to detect any abnormalities or any hazards caused to the environment and to conventional crops (Sasson and Elliot, 2004).

3.1 Introduction

One of the most important objectives of statistical analysis is to summaries the information contained in the data which may be considered either as a population or as a sample (or sub-population). If the set of data consists of all conceivably possible (or hypothetically possible) observations of a certain phenomenon or a variable, we call it as population. If a set of data contains only a part of these observations, that is selected values of a variable, we call it as sample. Frequency distribution and graphical representation summarize to some extent.  They reduce a mass of data to a more understandable form but not to a single value. The aim of this lesson is to determine descriptive measures or statistical constants which will describe the nature of the data.

In day-to-day life, one comes across many statements which create doubt about certain happenings and one may want to determine the chance of occurrence of a particular happening, e.g., if one desires to know the chance of rain based on some metrological observations.  In the case of coin tossing, one wants to know what will be the chance of winning if a person always stakes for head in a fixed number of tossing. There can be innumerable such queries which one would like to make and meanwhile evaluate mathematically the chance of the occurrence of such possibilities.  This invoked the need of probability theory. The theory of probability came in existence when problems of games were referred to mathematicians like Karl Pearson, Laplace and others. Complicated applications involving advanced theory of probability and axionmatic approach of probability are not dealt within this book.

Introduction

A system is a simplified version of reality and is defined as a collection of interrelated parts that work together. Most systems share certain common characteristics. These common characteristics include the following:
Systems have a structure that is defined by its parts and processes. Systems are generalizations of reality.
Systems tend to function in the same way as nature. This involves inputs getting changed in a process and realization of new outputs.
The various parts of a system have functional as well as structural relationships between each other.
Owing to the functional relationships that exist between the parts there is a flow and transfer of some type of energy and/or matter. In case of information systems there is a flow of information in the structure.
The parts that make up a system show certain degree of integration. In other words the parts work well together.

Fertilizers are required where soils are deficient in plant food elements. When land is planted to crops over a long period of time, the plant food elements slowly get reduced and productivity of crop goes down. Sandy soil looses plant food elements rapidly because heavy rainfall or application of irrigation water leaches these elements out from the soil. Adding chemical fertilizer increases fertility of soil. Principally nitrogen, phosphorous and potassium are added to the soil to promote greater yields. Uniform distribution and proper placement of fertilizer in the soil have become increasingly important factor in providing maximum crop response at minimum cost. Placing the fertilizer near the seeds at the time of sowing results in more effective utilization of nutrients. In the row crops side dressing of fertilizer is done which has immediate benefit when placed in the moist soil within the root zone.

Abstract
 
This work aimed to evaluate agromicrobes preponderance and activity in maize ecosystem of same soil types (diara land/fragile land) under different agricultural practices. We conducted a five year field survey of grower’s field to investigate the effect of tillage system, maize plant genotypes and soil organic carbon level on preponderance of diazotroph (Azotobacter), plant growth promoting rhizobacteria (Pseudomonas) and arbuscular mycorrhiza (AM) colonization of maize ecosystem. No tillage, traditional maize cultivar and soil organic carbon (>1%) appear to support the preponderance of targeted diazotrophs, plant growth promoting rhizobacteria (PGPR) in maize rhizosphere and AM colonization of maize root. Elevation in the preponderance of bacteria, Azospirillum population in maize root, AM colonization, microbial biomass, nitrogen mineralization, phosphate solubilising microbes, cellulose hydrolyzing microbes and acetylene reducing assay (ARA)  of maize root appeared due to organic fertilization of maize crop.

Abstract

Nitrogen is the most important element in terms of nutrition for plants, nitrate being the most preferred form. Nitrate not only acts as nutritional element but also as a signal to modulate metabolism and plant architecture. Nitrate sensing mostly happens in the root tip through a hitherto unknown mechanism, but its response can be demonstrated on an organism-wide scale. Functional genomic studies revealed over a thousand nitrate-responsive genes, involved not only in N and C metabolism, but also in various other physio-logical processes. Identification of nitrate response element/s common to all these genes could pave the way to unravel the mechanism of nitrate signaling, but findings in this direction have remained inconclusive so far. Several trans-acting factors have been implicated in N signaling and response, but none of these have been convincingly demonstrated to be specific to this response. Nitrate uptake, which is sometimes associated with nitrate sensing, is also highly regulated process and involves multiple transport systems like HATS, LATS and dual affinity transporters.

4.1. Flower and flowering in pigeonpea

Growth habit: Primarily, there are two major growth types in pigeonpea. These are determinate and non-determinate. The determinate growth in the pigeonpea plants is characterized by flowers in bunches at the top of the canopy (Fig 17a). In this case the epical growing points are transformed in to reproductive buds and bunches of flowers appear on the top of the canopy. Such cultivars are not popular as the management of insects such as Helicoverpa and Maruca becomes very difficult. Most of the cultivated types belong to another growth category called as non-determinate. In such genotypes the apical growing points remain vegetative and the plants keep growing under favorable conditions and it results in tall canopy with many spreading or compact branches. The inflorescence in this case emerges from the axil of secondary and tertiary branches (Fig 17b); and hang sideways. These types show less susceptibility to insects due to non-clustering nature of flowers.

DNA Isolation Protocol
Introduction

Most of the all procedures involved in molecular biology experiments require the purified form of nucleic acid. It forms a fundamental requirements for genome characterization, gene mapping and for identification and isolation of gene for genetic engineering. The most important step involved in removal of proteins which is carried out in different ways. The following protocol is one of the most commonly used protocols in animal, plant and microbial samples.

Summary

This review addresses various defense strategies evolved by plants to resist pathogen attack.Of the different defensive strategies, pathogen attack either induces or enhances constitutively the synthesis of a spectrum of diverse chemical compounds in various plant species. These chemical compounds also called secondary metabolites are classified broadly as nitrogen compounds, terpenoids and phenolics and have been documented to possess broad range antifungal, antimicrobial and pesticidal activities. Such defensive compounds could be extracted and developed as eco-friendly biopesticides/microbicides because of their natural occurrence, ephemeral nature and biodegradability. These will be favorable alternative strategies compared to chemical pesticides that are fraught with various harmful side effects.

Summary

The huge accumulation of agro-industrial waste-materials generated by the milling, brewing and various agriculture and food based industries which in total amount to be about 500 million tones per year in India. Most of these by-products contain three major structural polymers such as cellulose, hemicellulose and lignin. These are also the main source of feed for domestic animals. A high proportion of this waste material is carbohydrate and phenolic compounds. Accumulation of this kind of biomass not only results in the deterioration of the environment, but also loss of potentially important materials. Biological degradation, now-a-days, has become an increasingly popular alternative for the treatment of agricultural, industrial, organic as well as toxic wastes. Cellulose and hemicellulose being the major constituents of these materials can be referred to as valuable resources for a number of reasons, mainly due to the fact that they can be bio-converted easily into valuable products. These wastes can be processed to yield a number of value added products, such as biofuels like biohydrogen, bioethanol along with a variety of chemicals. Various treatment methods such as physical, chemical, biological are employed for the production of value-added compounds. Various phenolics like ferulic acid and vanillin are world’s most prized flavor compound mostly obtained through microbial treatment of agro-wastes.

Summary

Human being is dependent on nature and natural resources to combat diseases from time immemorial. Ayurveda describes the use of traditional herbs in medicinal preparations in ancient India. Such types of evidences are there in classical Chinese and Greek records also. Nowadays, modern tools are used to identify and purify the active principle from the herbal composition having the therapeutic effect. Bioinformatics tools are often used to screen the drug efficacy of natural products. Using computational and Bioinformatics tools, the efficacy of lead molecules can be screened. Moreover, drug targets can be identified using Bioinformatics and proteomics approach. QSAR and molecular docking tools are used to study the probable activity and mode of action of drug molecule. This approach has minimized the cost and time involved in the drug discovery process.

Summary

One of the most seductive lures of the genomic revolution is the promise of personalized medicine. The rapid identification of tens of thousands of human genes and hundreds of thousands of DNA variations that might influence disease susceptibility has spawned a new field Pharmacogenetics and Pharmacogenomics deal with the genetic basis underlying variable drug response in individual patients. The traditional pharmacogenetic approach relies on studying sequence variations in candidate genes suspected of affecting drug response i.e. single or few genes. On the other hand, pharmacogenomic studies encompass the sum of all genes, i.e., the genome. Numerous genes may play a role in drug response and toxicity, introducing a daunting level of complexity into the search for candidate genes. The high speed and specificity associated with newly emerging genomic technologies enable the search for relevant genes and their variants to include the entire genome.

Summary

Molecular evolution is the process of evolution at the scale of DNA, RNA, and Protein. Molecular evolution emerged as a scientific field in the 1960s as researchers from molecular biology, evolutionary biology, and population genetics sought to understand recent discoveries on the structure and function of nucleic acids and protein. It covers two broad areas of study : the evolution of macromolecules, and reconstruction of the evolutionary history of genes and organisms. The evolution of macromolecules refer to the characterization of the changes in the genetic material (DNA or RNA sequences) and its products (Proteins of RNA molecules) during evolutionary process, and to the rates and patterns with which such changes occur, and also the mechanism responsible for such changes. The second area also known as “molecular phylogenetics”, deals with the evolutionary history of organisms and macromolecules as inferred from molecular data and the methodology of tree reconstruction.

Indian Agriculture is facing a wide spectrum of constraints such as burgeoning population, shrinking farm land, restricted water availability, imbalanced fertilization, low soil organic carbon, besides experiencing the fatigue of green revolution and vagaries of climate change. To address all the challenges ahead, we should think of an alternate technology such as “nanotechnology” to precisely detect and deliver the correct quantity of nutrients or other inputs required by crops that promote productivity while ensuring environmental safety. The word “nano” refers to the size of one-billionth of a metre or one-millionth of a millimeter in any one of the dimension. We are aware that all materials are made up of atoms which are the smallest units and for example, ten hydrogen atoms put together will measure one nanometer. As the size gets reduced, the surface area gets increased by several folds.

Summary

ISFM is important, cost-effective and has the potential of improving farming efficiency and crop productivity. This is only possible when farmers understand the concept and follow recommended practices in the ISFM approach.
 
The challenge is how to effectively disseminate ISFM practices to farmers for sustainable crop production.

Summary

Reaching large-scale implementation should be the overriding objective of all projects that have successfully ISFM practices to share provide markets support them. All too often ISFM results are only reported in peer-reviewed journals that are not accessible outside the research community.
 
Funding agencies often fail to make the production of extension materials an integral and mandatory requirement of research projects.
Unfortunately, in the past, adoption of economically proven technology has often been poor. Some of the reasons include:

Abstract

A transect was performed along the Chubut River (Patagonia) from the Atlantic towards the Andes measuring major water parameters of this drainage area. Samples were taken at different locations of the Chubut River, and also brooks several Andes lakes in the Chubut and Río Negro Provinces as well as from several Andes rivers and mountain creeks. For comparison, the Laguna Cacique Chiquichano in Trelew (Chubut) was investigated. Several physico-chemical parameters were determined (pH, oxygen, nitrogen compounds, conductivity, redox potential, water hardness and spectral transmission), as well as photosynthesis by means of PAM fluorimetry. Water toxicity was assessed with a bioassay based on toxicity-induced changes of the movement behavior of a flagellate.

Aquaculture is the cultivation of fish, molluscs, crustaceans (shell fish) and aquatic plants in controlled conditions, provides an increasingly significant proportion of food production globally. The sector has represented the greatest growth of all food production systems in the last two decades and an estimated 10% yearly increase in output is likely to bring productivity to a predicted 47 million tonnes in the year 2010 (Pedini and Shehadeh, 1997). Significantly, the greatest contribution to total production and the greatest rate of uptake of aquaculture activity is in the developing world. More than 82% of the total global yield in 1999 was produced by developing countries (GESAMP, 2000) and growth rates between 1984 and 1995 were six times higher than that from developed countries (Rana, 1997; Tacon, 1996).

Bulb crops include onion, garlic, leek, shallot, welsh onion and chive all belonging to the genus Allium.  This genus was earlier included in the family Liliaceae due to its superior ovary.  It was later shifted to Amaryllidaceae as flowers are born in a bracted umbel on top of a scape.  Being the typical genus in the family Amaryllidaceae, a new separate family status was given to all the specious under Allium as Alliaceae.

Livestock sector has emerged as one of the key components of agricultural growth in developing countries in last few decades. This sector plays a significant role in the economic progress of India as it contributes 26% to the agricultural GDP and provides employment to around 18 million people. Over 70% of the rural households in India depends on livestock farming for supplementary income and is considered as an important instrument in poverty alleviation. It provides the major extra contribution to agriculture through manure, fuel fertilizer, apart from meat and milk that grant a regular supplementary income and employment not only to producers but also to huge size of the population engaged in secondary and tertiary business related to livestock. The economy of Jammu and Kashmir is also agriculture dependent and is the main occupation of majority of the rural people who earn their livelihood from it. Census figures 2011 signify that about 73% of the population of J&K lives in rural areas and are associated with agriculture and allied sectors including livestock rearing as main occupation.

Abstract

The history of the development of the tea plantation industry in the Darjeeling district dates back to the early fifties of the nineteenth century when the English entrepreneurs took lease of extensive land on the mountain slopes of the Darjeeling Himalaya and started tea plantations. During the formative years of the introduction of the plantation industry the region was sparsely populated so, laborers from various parts of India and her neighboring countries were encouraged to settle in the fringe areas of the Tea gardens. Over the last 160 years many changes have taken place in their lifestyle. The main purpose of this paper is to reconstruct the history of Darjeeling tea and to explore the life of people in the Darjeeling region and also to learn how the local populace adjusted themselves with the given environment with the changing scenario of the area.

INTRODUCTION

Farming acts as the primary occupation of majority of the population in India. According to National Sample Survey Estimate, about 49% of the Indian population is dependent on agriculture and allied industries (GOI, 2014, CIA, 2012) making it the largest source of employment to the people of India. Although, being a second largest food producing country in the world (Sarkar, 2009), the contribution of agriculture to the GDP has been declining. The contribution of agriculture to Indian GDP has declined from 30% in 1991 to 15% in 2011-2012 to 13.7% in 2013 (Economic Survey. 2013-2014). This decline is also accompanied by a decline in the participation of people in Indian farming sector. In fact between 2001 and 2011 about 9 million people have quit farming, which is about 2 million more than the decline noted in the previous decade (GOI, 2011). This figure equates to about 2035 farmers quitting farming per day. The recent census (GOI, 2011) also highlighted that for the first time in four decades an absolute decline (about 7%) in the cultivators has been noted.

Databases

A database is a collection of information that is organized so that it can easily be accessed, managed, and updated. Databases can be classified according to types of content: bibliographic, full-text, numeric and images and by their application area, for example: accounting, music compositions, movies, banking, manufacturing, or insurance. The term database may be narrowed to specify particular aspects of organized collection of data and may refer to the logical database, to the physical database as data content in computer data storage or to many other database sub-definitions.

1. Introduction

Antheraea assamensis is lepidopteron insects of Assam which is commercially utilized for the heritage golden silk “muga”. Rearing of muga silkworm is one of the most significant traditional handloom industries restricted only to the North Eastern Region of India (N.E. India) and plays a major role in the rural economy.  Considering the ecological conditions, food plant distribution, presence of eco-types and species of diverse nature in co-existence, it is speculated that this region is a possible home of origin of Antharaea, from where radiations would have occurred (Neog et. al., 2010). Despite the fact that N.E. India is the original home of muga, earlier studies have shown that the population is declining due to depletion in genetic variability (www.cdfd.org.in/wildsilkbase/info_moths.php).

Introduction
 
Intellectual property is a cluster of legally recognized rights associated with innovation and creativity, the works of the mind, as against physical products, land and other tangible resources. Even though it is intangible, intellectual property (IP) is often recognized as personal property, to be sold and traded like other forms of property. Under intellectual property law, owners are granted certain exclusive rights to various markets, machines, musical, literary, and artistic works; discoveries and inventions; and applications. But national laws normally don’t define ‘intellectual property’ as a single property right. Instead, ‘intellectual property’ is used as a convenient general term describing a range of distinct legal rights, relating to literary, artistic and scientific works; performances of performing artists; phonograms, and broadcasts; inventions in all fields of human endeavour; scientific discoveries; industrial designs; trademarks, service marks, and commercial names and designations; protection against unfair competition and all other rights resulting from intellectual activity in the industrial, scientific, literary or artistic fields.

Cytokines are the chemical messengers that are involved in interactions between the cells of innate and adaptive immune responses. They are secreted by leukocytes and many other cells in the body. They are low molecular weight proteins or glycoproteins which are produced in response to various kinds of stimuli. Cytokines have important role in immune and inflammatory responses.  Their functions are not limited to immune system only.They also stimulate the development of hematopoietic cells and also act as therapeutic agents.

The immune system has been designed to provide protection to the body from various diseases. But the same system which is aimed to provide protection may sometimes become harmful to the body and may even life-threatening. There are situations when immune response against harmless and inert antigens is exaggerated and actually causes diseases. Such a condition is called hypersensitivity or commonly as allergy. Though the term ‘hypersensitivity’ indicates an increased response but the immune response is not always heightened, instead it may be an inappropriate response to an antigen.

One of the greatest achievements in science is the development of vaccines. Vaccines have been revolutionary for the prevention of infectious diseases. They have prevented a large number of deaths caused, every year, by dreadful diseases like smallpox, polio, hepatitis etc. Diseases like smallpox and polio have been successfully eradicated by vaccination. Normally, when the body encounters a microbe, both humoral and cytotoxic immune responses are induced to neutralize its effect. In addition to eliminate the invader, body forms memory cells which help the body to protect itself from the same pathogen, in future. Vaccines not only function to kill the pathogens but they also stimulate the body to form memory cells which provide immunity against a specific pathogen

Many techniques are used in immunology to detect specific proteins (antigens) or antibodies in biological samples. These techniques are called immunotechniques. These methods are used for research and diagnostic purpose in many fields such as microbiology, biochemistry, endocrinology, hematology and in pathological laboratories. The techniques can be used to estimate proteins, drugs, hormones and toxic substances in a sample. Immunological techniques are highly specific, precise and reliable. These methods are simple and safe. Antigen and antibody reaction is highly specific in nature and this forms the base of the immunological methods. There are many immunotechniques which are used for the qualitative and quantitative estimation of antigens and antibodies in a sample. Some of commonly used techniques in immunology are:

Introduction

The rumen ecosystem is essentially a fermentation system that houses a vast array of different microbes. Ruminants typically browse low energy forages, such as grasses or other plant material, rich in fibre but not easily accessible to the ruminant without rumen fermentation. These forages are literally food for the microbes present in the rumen first and then, in turn, the products of these microbes are the feed for the ruminant. Microbes break down forage in the anaerobic rumen environment and the products of microbial fermentation provide the ruminant with metabolisable compounds, such as short chain fatty acids, while the microbes themselves account for around 90% of the amino acids entering the lower intestine. There are many significant challenges to investigate rumen ecology.

The organic quality is based on standards, inspection, certification and accreditation. All organic food is produced and handled according to strict rules called ‘Organic Standards’. Organic standards do not define a quality status which can be measured in the final products (e.g. quantity of pesticides residues, heavy metals, etc). They define the way of production (e.g. that no chemical pesticides and fertiliser are used).

The success of rabbit farming depends upon the location and design of the rabbit house. Rabbit is a burrowing animal and has sharp reflexes. It is easily disturbed by any new and sudden noise. The farm should be located in a peaceful environment away from the hustle and bustle of human population.  A good housing facility with adequate arrangement of ventilation is the most important factor in rabbit house.

Hill cattle in Uttarakhand are multipurpose animals. They are used for milk, draft, manures and ceremonial purposes. Improvement for these attributes depends on definition and subsequent selection for various traits. Based on the criteria for improvement and detailed literature analysis, it is believed that the hill cattle of Uttarakhand is one of the potential population for milk in the state specially in the remote and high altitude areas.. Hill cattle have also been used for dairy improvement as a dam breed for crossbreeding in some cases in the state. It has been observed that hill cattle in the state mostly reared as dual purpose animal i.e milk and draft. Therefore, the hill cattle could be improved for both milk and draft. The aim of the present study is to know the status, characterstics and performance  and to suggest the possible options for improvement in milk productivity of hill cattle in the state.

Bioinformatics is a branch of biological science which deals with the study of methods for storing, retrieving and analyzing biological data, such as nucleic acid (DNA/RNA) and protein sequence, structure, function, pathways and genetic interactions. It generates new knowledge that is useful in such fields as drug design and development of new software tools to create that knowledge. Bioinformatics also deals with algorithms, databases and information systems, web technologies, artificial intelligence and soft computing, information and computation theory, structural biology, software engineering, data mining, image processing, modeling and simulation, discrete mathematics, control and system theory, circuit theory, and statistics.

Rural poultry production constitutes vital component of agricultural economy in India. The organized sector of poultry industry is contributing nearly 70% of the total output and the rest 30% by the unorganized sector. In unorganised sector, poultry are reared in free range extensive system with very little input in the form of grain or farm by-products, birds have to scavenge from limited amount of feed resource. The productive out put of these birds are very low (60-70 eggs per bird per annum; 2.0 kg. and 1.5 kg. body weight per bird in males and females, respectively). Moreover, still more than 50 % population of poultry in India comprises of non-descript / deshi birds.

Under natural conditions, the largest source of labile carbon (C) inputs to the soil is root exudates (Bertin et al., 2003; Hutsch et al., 2002; Kuzyakov 2002). Roots exude a variety of low-molecular weight organic compounds, including sugars, amino acids, organic acids (Bertin et al., 2003), but also contain hormones, vitamins, amino compounds, phenolics and sugar phosphate esters (Uren, 2001). These compounds are rapidly metabolized; for example, Hutsch et al., (2002) found that 64–86% of maize root exudates were respired by soil microorganisms. The effect of root exudates depends on the distance that they can diffuse away from rhizoplane (Gupta and Mukerji, 2002).

Fertility of a soil can be assessed by analyzing various available nutrients present in the soil. Fertilizer recommendations for various crops and cropping sequences can be made on the basis of fertility status of a soil. Besides this, problematic soil can be ameliorated on the basis of soil test values. Among the various steps of soil testing programmes, soil sampling is the most vital step.

Particulate Matter

Anthropogenic emissions of particulate matter include fossil fuel (diesel and petrol) combustion from mobile and stationary sources (Rogge et. al., 1993a-c), biomass burning (Forest fires, landfills, agricultural activities and incinerators) (Oros and Simoneit, 1999) natural gas (Rogee et. al., 1993c), wood (McDonald et. al., 2000) and coal combustion (Mastral and Callen, 2000).

True/False

Q.1.    A hypothesis that sets the fundamental objective of scientific study is called the “Research hypothesis”.
Q.2.     A statistical assumption or statement about the unknown parameters of a population is known as Statistical hypothesis.

True/False

Q.1.    According to Prof. RA Fisher “ANOVA” is the separation of variance assignable to one group of causes from the variance assignable to other group of causes.
Q.2.    The basic purpose of ANOVA technique is to test the equality (homogeneity) of several population means from the same 
experiment.

Abstract

As we have entered in the post genomic era where we have successfully completed the full genome sequencing of many important crop species and now the future challenge is to ascertain the functions of all genes present in plant genome.

Abstract

There are several empirical models to describe deep bed drying dividing the domain into many thin layers. Empirical equations are seen as a resource that only serves to describe the thin layer drying kinetics of an agricultural product. Normally an empirical model is used to determine drying rate. The validity of following thin-layer drying models are accounted by coefficient of correlation (R2), standard error of estimated (SEE), root mean square error (RMSE). The properties of dried foods vary substantially depending upon the type of product, moisture content, drying type and ultimately drying conditions. To take care all above variables, a promising approach is to use Artificial Neural Network (ANN). In process control, the main objectives are food safety, high quality and yield at minimal costs. To obtain high quality products, on-line control techniques are required. Most food processes are highly nonlinear, with time varying dynamics, which complicates food automation. However, the recent developments in artificial intelligence based advanced control tools such as ANN to food processing have opened up novel possibilities for processing industries.

Abstract

Fruit leather is a concentrated source of nutrient, energy and minerals processed from fruits in the form of sheet or leather. It is eaten as a desert or snack since ancient time. Fruit leathers have a greater benefit than fresh fruits if equilibrium ingredients are established and seasonal surplus of fruits are utilized and contributed to minimize post-harvest losses. The process of making fruit leathers involve making fruit puree and adding additives and preservatives for the purpose of enhancing taste and shelf-life. Drying, the key unit operation in making fruit leathers, is the most energy intensive and time consuming step in the process, modern drying techniques can be implemented to overcome the limitations. By novel means of processing technologies or enrichment could lead fruit leather to introduce high quality food product in the market. Continuous research and development can lead to a new era of production and development of fruit processing and overcome the obstacles during processing. In addition study on chemical and biochemical hazards involved in overall process will guide to ensure product safety. Market research tools e.g. quality function deployment method and other market analysis methods could be applied to understand the product trend, demand, consumer expectations and the scopes of improvement.

Abstract

Application of solar energy for drying of agricultural food products is one of the most attractive and cost-effective drying techniques. However, the intermittent nature of the solar energy is one of the major shortcomings of the solar drying system that can be alleviated by storing excess energy during the peak time and using it in off sun hours or when the direct availability of solar energy is inadequate. The use of sensible and latent heat storage systems in solar dryer is an effective way of storing thermal energy for drying purpose. This chapter will present information on different thermal energy storage (TES) materials, their advantages and disadvantages. The information available in the literature regarding the studies conducted on TES assisted solar drying systems is also covered in this chapter. In addition, some of the models that have been used by different researchers to test the performance of different TES materials are also reviewed.