eChapters

Introduction

The need for water for human consumption and the industry keeps spiraling up in the cities in the wake of rural diaspora and urban sprawl. Groundwater is exploited at an unsustainable rate leading to depletion of aquifers. Worse still is the intrusion of salt water from adjoining coast into the aquifers leading to total wastage of remaining water.

Introduction

Fresh water, a renewable but not an infinite resource, is becoming increasingly scarce. The amount available for use to the world today is almost the same as it was 4500 years ago but global demand has been increasing exponentially. Since 1950, the renewable supply per person has fallen 58 percent as world population has swelled from 2.5 billion to 6 billion. Moreover, unlike oil and most other strategic resources, fresh water has no substitute in most of its uses. It is essential for growing food, manufacturing goods, and safeguarding human health.

According to a World Policy Forum report, the largest and most combustible imbalance between population and available water supplies will be in Asia, where crop production depends heavily on irrigation. Asia today has roughly 60 percent of the world’s people but only 36 percent of the world’s renewable fresh water. China, India, Iran, and Pakistan are among the countries where a significant share of the irrigated land is now jeopardized by groundwater depletion, scarce river water, a fertility-sapping buildup of salts in the soil, or some combination of these factors. Groundwater depletion alone places 10 to 20 percent of grain production in both China and India at risk.

Before carry out any ethnobotanical work, first define the goal of the assignment or study before selecting the approach, which best suits the interests, budget and schedule. Most of the methods used in ethnobotanical studies are time taking and costly because several field trips are required in several seasons for covering different ritual occasions and seasonal farming activities which are continue for a number of years for completion of an assignment. In this way, an assignment may be very long or short as per selection approach of an ethnobotanist. Long-term assignment or projects may be continue for several years and they require sufficient financial input. When sufficient financial add and time does not available to accomplished long term assignments, in that case a Rapid Ethnobotanical Appraisal (REA) can be done.

Major Families

This chapeter deals with indigenous knowledge on use of various plant species in traditional medicine, food, dye, wood and in tanning etc.

Malvaceae

The family Malvaceae is also known as Mallow family, characterised by mainly shrubs and herbs. The plants of this family frequent have stellate trichomes, persistant sepals, epicalyx present, stamens numerous and monadelphous, anthers monothecous, carpels 5 or more.

Abroma angusta (Devil’s Cotton)

Paste of the leaf is applied to heal wounds and to relieve joint pain or back pain. Young shoots are used as food. Roots are used to cure itching.

Abutilon indicum (Kanghi)

The whole plant is used to make brooms. Plant also has medicinal value and its sap is used against ulcer, leprosy, piles, dysentery and fever.

Introduction

The acute food shortage was a major challenge in confronting the development of the country after independence with rapidly increasing population. Massive financial assistance of credit and subsidy under various rural development programmes unveiled by government could not yield desired impact on poverty and unemployment. The benefits of farm research did not reach the resource poor farmers. Several researchers indicated that the devolution of democratic decision-making at the village level was lacking.

The major task of bridging the gap between farmers and the scientific knowledge is in the hands of extension workers who should act as “conveyer belts” in communicating appropriate scientific knowledge and skills already available to the farmer in a smooth and acceptable form and in securing the adoption of these improved techniques. They must assess the intentions prevailing in the minds of rural people, their relationships and interactions, their groups, their institutions, their organizations and the culture, which influence the behaviour at large. They need to understand their motives, reactions, receptivity to new ideas, hidden resources of rural people and social and cultural obstacles prevailing in the society with their active participation.

To elucidate the hidden facts from the well-knit social, cultural and behavioral patterns, a family of approach known as “Participatory Rural Appraisal (PRA)” techniques is widely employed to understand the existing farming situations, problems, and opportunities in the rural areas. PRA techniques can also be used in evaluation and impact assessment in agricultural and allied enterprises and projects that can indicate the success and failure to plan for better future.

Abstract

Development of vermicomposting technology in India was started in seventies, but except some areas of South India it has not been popularized among common masses. This technology is labour intensive and needs attention to handle the tiny earthworms in a proper manner. Sincerity and dedication bring success while casual attitude ends up in financial loss. Lack of proper knowledge on suitable technique, unawareness about nutrient and hygienic standards of vermicompost, non availability of suitable earthworms, lack of marketing and training facility are some major problems in non-flourishing this technology in rural areas. But this technology being simple and easy to follow, is gradually becoming a boon to the low educated poor unemployed youths of the society for their economic development through generating income and creating self employment. Vermicompost, vermi-T and earthworms are marketable product. Government agencies and Non Government Organizations are trying to popularize this technology which has bright prospect to maintain health and hygiene of human to environment.

“Small is beautiful”, today we know that small is not only beautiful but also powerful. With the range of applications that nanoparticles find in varied fields of engineering and science, nanoparticles seem a promising option when compared to the conventional materials used. Nanoparticles are particles that have at least one dimension in less than 100nm range. They have a high surface to volume ratio and thus mass transfer and heat transfer properties are better than bulk materials. Recently; core/shell nanoparticles are finding widespread application. There is a class of core/shell nanoparticle that has its entire constituent in the nanometer range. Core/shell nanoparticles are nanostructures that have core made of a material coated with another material. They are in the size range of 20nm-200nm. Also, composite structures with these core/shell particles embedded in a matrix material are in use. The necessity to shift to core/shell nanoparticles is the improvement in the properties. Taking into consideration the size of the nanoparticles, the shell material can be chosen such that the agglomeration of particle can be prevented. This implies that the monodispersity of the particles can be improved. The core/shell structure enhances the thermal and chemical stability of the nanoparticles, improves solubility, makes them less cytotoxic and allows conjugation of other molecules to these particles. The shell can also prevent the oxidation of the core material. “When a core nanoparticle is coated with a polymeric layer or an inorganic layer like silicabecausethe polymeric orinorganiclayerwould endow the hybrid structure with an additional function/property on top of the function/property of the core hence synergistically emerged functions can be envisioned”.

Introduction

Animal husbandry has always been an integral part of Indian civilization and our country possesses rich biodiversity of animal genetic resources, which are spread over diverse agro-climatic regions. These resources have been developed by our ancestors over several generations and have acquired special attributes like remarkable adaptability to environment, management conditions and genetic resistance to most tropical diseases besides survival on poor quality of feed and fodder. In spite of multiple threats of change, replacement, degradation and extinction, this biodiversity of farm animals comprises of 30 well-described breeds of cattle, 10 of buffaloes, 20 of goats, 40 of sheep, 8 of camel, 6 of horses, 20 of poultry besides large number of variants of native ponies, pig, donkey, yak and mithun. This mega-diversity is not accidental, nor it is purely natural, rather, it is the outcome of thousands of years of deliberate selection and planned exposure to a range of natural conditions. The description of various breeds of most economically important species of livestock viz. cattle, buffalo, goat and sheep and their genetic improvement is as follows:

ABSTRACT

Agroforestry research and development in scientific mode in India started about thirty years ago with few individual scientists working on the aspect. However, concentrated efforts started with the establishment of a network under co-ordinated mode throughout the country in the year 1983. Since then lot of research has been done and recommendations made. The present paper compiles the chronological sequences of the starting of AICRP on AF along with its co-ordinating partners. Suitable perennial species and agroforestry systems recommended for respective agroclimatic zones of the country are also compiled. National seminars and group meeting conducted for popularizing and extending agroforestry to every corner of the country had also been provided.

INTRODUCTION

Agroforestry is an age old practice and was a way of life since the settled agriculture evolved from forest. However, with passage of time the cropping system was converted to monocropping and in the way the benefits of integrating the perennials with annuals were forgotten. In the late 70’s of 20^th century, benefits of integrating perennials in cropping system was again realized and efforts were diverted towards scientifically associating the perennials and annuals. Dr. M.S. Swaminathan an eminent scientist while addressing first agroforestry seminar at Imphal in 1979 stated that agroforestry lies the key solution of some of the problems of forestry “what is now important is to give a scientific context and better planning like a good architect who can plan the use of space more efficiently”. This seminar was a spark in the history of scientific agroforestry in India. Taking into account the vide variation in edaphic and climatic factors in India along with the perennial nature of the systems, it was felt that working in isolation would not yield fruitful results and therefore, an association of scientist and institutes of different agroclimatic regions in form of a network was felt imperative and a viable wayout and hence the birth of AICRP on Agroforestry. All India Co-ordinated Research Project on Agroforestry (AICRPAF) was initiated vide ICAR letter number 21(1)/80-SW & DF dated 7^th February, 1983 at 20 centers of which 12 centers were located in State Agricultural Universities and eight at the ICAR institutes. Later on more co-ordinating centers were added and at present there are 37 AICRPAF co-ordinating centers with 10 centers in ICAR institutes and 27 centers located in State Agriculture Universities covering all the major agroecological zones of the country. The coordinating unit of the project was initially located at ICAR, Krishi Bhawan, New Delhi, which was shifted to National Research Center for Agroforestry, Jhansi w.e.f. 1^st April, 1997 under the administrative control of Director, NRCAF.

ABSTRACT

Mizoram is predominantly a hilly state where people have been practicing agroforestry in a variety of forms from traditional shifting (jhum) cultivation to the most scientific-induced agroforestry models. However, ‘jhum’ still remains the main form of land use even though it is known to cause severe soil, water and biodiversity erosion and low crop productivity. The induced agroforestry practices carried out in Miozram have the ability to replace shifting cultivation but these systems again are not properly designed to tackle various biophysical, socio-cultural and economic need of the people, resulting in their poor acceptability. The paper reviews various agroforestry systems prevailing in Mizoram and details some ongoing agroforestry research trials in the State.

ABSTRACT

Arunachal Pradesh, the largest state of North-East India is unique state of the country in the sense that its altitude range between 70 – 7000 m, have 26 major tribes besides 110 sub-tribes, have 82 per cent of its land under forest and most of the area is under the control of local tribes which practice shifting cultivation. The paper presents the potentialities of agroforestry in Arunachal Pradesh. The different agroforestry systems prevailing in the state are also given in detail. Agroforestry systems which are scientifically tested and the direction in which research are to be done in future to extend agroforestry has also been presented.

INTRODUCTION

Indian Eastern Himalaya, covers the states of Assam, Sikkim, Arunachal Pradesh, Nagaland, Mizoram, Manipur, Tripura and Meghalaya (Kukreti, 2000). The erstwhile North East Frontier Agency, now Arunachal Pradesh, the largest state among the North-eastern states of India lies at latitude 26°28’-29°30 N and longitude 91°30’- 97°30 E with a geographical area of 83,743 km². The human population of the state is 10,91,113 (GOI, 2002). The recorded forest area in the state is 68602 km² which is 82.0 per cent of the geographical area of Arunachal Pradesh (Kukreti, 2000). The forest cover in the state forms the highest amongst all the states of the country and state is least densely populated. The state is bounded by Bhutan to the west, Myanmar to the east, China to the north and north east, and the plains of Assam to the south. There are 26 major tribes and 110 sub tribes which inhabit different parts of the state, with a life style totally dependent on the forest resources. Moreover, almost all the major tribes and sub tribes has been practicing shifting cultivation from the ancient time in this region which is integral part of sociocultural life of the tribal people.

A. Answer the following question:

1.    What is carbohydrate?

Ans: Literally means hydrates of carbon. Carbohydrates are polyhydroxy (more than one OH group) aldehyde or polyhydroxy ketoneas in monosachharides; their olymers as in oligo and polysaccharides; their reduction products as polyhydric alcohols; oxidation products as aldonic, uronic, sacharic acid; substitution products as amino sugars.

2.    What is sugar?

Ans: The term sugar is generally restricted to those carbohydrates containing less than 10 monosaccharide residues.

3.    What is dextrin?

Ans: It is the intermediate products of the hydrolysis of starch and glycogen.

4.    What is exergonic reaction?

Ans: That portion of energy change during a reaction which is available to do work is termed the free energy change, designated, “G. when “Gis negative the reaction is said to be exergonic.

5.    What is substrate level phosphorylation?

Ans: Whenproductionof ATPfromADPtakesplacedirectlyduring a reaction, the process is known as substrate level phosphorylation.

6.    Why carbohydrate is a metabolically essential?

A. Answer the following questions

1.    Why vitamin Ais called anti-infective vitamin?

Ans: Vitamin A is concerned with the synthesis of muco-polysaccharides distributed throughout the body as in respiratory tract,alimentary tract,reproductive tract,genitor-urinarytractetc. In thedeficiencyof vitaminA,theepithelium lining of these tracts becomes keratinized with the result that it becomes prone to infection. That’s why it is also called as anti-infective vitamin.

2.    Why ducks are less effective than chickens in converting tryptophan to niacin?

Ans: Ducks have a 3-4 folds higher level of picolinic acid carboxylase than chicken which enzyme converts the tryptophanto picolinic acid instead of niacin.

3.    Whyvitamin Cis dietaryessential tohumans, monkey, guinea pigs?

Ans: In these species, due to lack of L-gulonolactone oxidase enzyme which is required for synthesis of vitamin C (from 6 carbon sugars like glucose/ galactose in liver or kidney),they can not synthesize their own requirement in their bodies.

4.    What is vitamin?

Introduction

The nucleic acids are the molecular depots that are responsible for continuity of life by transfer of hereditary information from one generation to next. The sequence of nitrogenous bases containing programmed instruction determines the structure of every cell constituent and eventually every protein. In 1869, Friedrich Miescher, Swiss chemist, isolated an unknown phosphate-rich substance from pus cells named as nuclein, which was quite different from other organic substances like carbohydrate, protein, and fat. Altmann in 1899 ascertained that the nuclein also had some acidic characteristics and changed its name to ‘nucleic acid’. Later, nucleic acid was also isolated from salmon sperm nuclei as DNA-protaminecomplex. In 1953, James D.Watson and Francis H.C. Crick constructed the model of three-dimensional double helix structure of the DNA molecule which could successfully explain DNA replication.

Introduction

Nutritive value of any food indicates the calories content as well as quality attributes. Macronutrients such as carbohydrates, fats and proteins provide energy by4-9-4 rule. It meanstheyprovide 4,9 and 4 kcal/genergy, respectively, when oxidized completely. Though micronutrientssuch as vitaminsandminerals do not provide any calories, they are essential for the enzymatic activity and metabolic reactions.

ATP or energy is measured in terms of ‘calories’ or ‘joule’. One calorie is the amount of heat required by 1g of water to increase its temperature from 14.5 to 15.5°C under standard conditions. Nutritive value of any food can be measured on shelf usingcalorimeter, in which food is completelyoxidized under specified conditions and converted into CO₂ and water.

Introduction

In agriculture and public health sectors, a variety of pesticides are still in uses that are toxic chemicals and having broad-spectrum actions. They kill target species but also harm the ecosystem seriously by affecting desirable organisms, thus, badly impairing prey-predator relationship. Most of these pesticides are persistent or non-biodegradable and hence exhibit biological magnification by accumulating at higher concentration in the organism, which are on the top of the food chain. The other drawbacks of repeated use of pesticides are eradication of natural enemies of pests, increased level of pesticide residues in soil, water, food and fodder crops, resistance of pests to pesticides and resurgence of minor pests in addition to the environmental pollution. It is clear that once used pesticide may persist, somewhere causing serious harm to the mankind and his ecosystem.

The increasing incidence of pesticide harms is fueling the need for new pesticides, which are toxicologically safe, more selective and efficacious and environment-friendly. Now the natural compounds, thus, have increasingly become the focus of those interested in discovery of pesticides. Tens of thousands of secondary products of plants have been identified and there are estimates that hundreds of thousands of these compounds exist. There is growing evidence that most of these compounds are involved in the interaction of plants with other species-primarily the defense of the plants from plant pests. Thus, these secondary compounds represent a large reservoir of chemical structures with biological activity. This resource is largely untapped for use as pest management agents^3, 4. The extraction of such chemicals from plants and derivatives of potent compounds are being encouraged all over the world under the Integrated Pest Management (IPM) approaches. The natural compounds and their synthetic derivatives are more selective in action, completely biodegradable and environment-friendly. In short, natural ways of pests control have already been established and are receiving much attention these days.

DNA replication. The double helix is unwound and each strand acts as a template. Bases are matched to synthesize the new partner strands.

DNA replication, the basis for biological inheritance, is a fundamental process occurring in all living organisms to copy their DNA. This process is “replication” in that each strand of the original double-stranded DNA molecule serves as template for the reproduction of the complementary strand. Therefore, following DNA replication, two identical DNA molecules have been produced from a single double-stranded DNA molecule. Cellular proofreading and error toe-checking mechanisms ensure near perfect fidelity for DNA replication.

In a cell, DNA replication begins at specific locations in the genome, called “origins”.

Unwinding of DNA at the origin, and synthesis of new strands, forms a replication fork. In addition to DNA polymerase, the enzyme that synthesizes the new DNA by adding nucleotides matched to the template strand, a number of other proteins are associated with the fork and assist in the initiation and continuation of DNA synthesis.

The way technology is evolving, and the way it is changing our ways of living, why should we not be optimistic about technology. But then optimism comes tagged with pessimism. We aim for unfathomable optimum optimism. Technology is like water. It finds its open spaces. If it fills the available spaces more than it should, there is flood.

Future engineers and technologists are expected to appreciate, more than before, the human dimensions of technology. They are expected to have a grasp of the global issues. There is a need to understand the nuances of working in a culturally diverse space. According to some experts, good engineering designs should not be deprived of the benefits of a broad spectrum of life experiences, as adequate familiarisation with societal demands is essential for practical technological literacy.

Future engineers need to be better equipped to deal with people of diverse backgrounds, such as from social sciences, management, and communication. Some of the grand challenges that are enlisted, from an engineer’s point of view, are environment protection, hunger, energy and controlling the spread of the diseases. We need developers of responsible technologies and products.

We need managers to manage things, and at the same time we need adequate number of things to manage. There is a need to build faith in the public that engineers and technologists are sensitive to their concerns. One of the biggest responsibilities of the engineers and technologists is to keep themselves updated about professional developments and practices.

Countries, not only want exceptional scientists and engineers, but also people who are temperamentally innovators, and think they fit into their country’s core values. Many would say, prepare young minds and nurture future innovators.

Introduction to DHAN Foundation

DHAN (Development of Humane Action) Foundation is a grassroots action agency working with poor communities in villages. Enhancing poor people’s livelihoods in sustainable way and enabling the poor communities are the focus of the programmes. The mission of the organisation is to build institute for innovation in the development work and reaching significance to bring positive changes in the lives of poor. DHAN Foundation was established in year 1997 as spin off institution of PRADAN (Professional Assistance for Development Action) based at New Delhi.

DHAN Foundation believes in building the capacity of people in planning, organizing, conflict resolution and implementation of development programmes. This will be possible only when people are encouraged to work on a single thematic focus, either through micro finance or small scale irrigation theme, for a substantive period to pick-up the generic skill of developing viable alternatives to their stalemate situation; DHAN Foundation initiatives are aimed at building people constituencies around specific activity, these institution will move into civic programmes like health, Education and Information Technology to address their member’s needs. Simultaneously DHAN Foundation as a mothering institution promotes thematic organizations as subsidiaries to upscale the matured themes and continue the promotional role to sustain the people’s organization in the specific theme for e.g. micro finance or irrigation.

2.1 Introduction

In a fiber optic sensor the heart of the sensor is an optical fiber. An optical fiber in its simplest form is a cylindrical symmetric structure consisting of a central ‘core’ glass/plastic of uniform refractive index and of diameter 4-600 µm. It is surrounded by a ‘cladding’ glass/plastic of slightly lower refractive index. To provide the mechanical and environmental protection to the fiber, the cladding is covered with an external plastic coating (seeFig. 2.1). The light in the fiber propagates by bouncing back and forth from the core-cladding interface. The design of the fiber optic sensor depends critically on the choice of optical fiber. Telecommunication fibers are inexpensive but may not be the right choice for sensors. Some of the fiber optic sensors dictate the use of application-specific optical fibers. In this chapter we shall first describe ray analysis for the light propagation in the fiber. The modes propagation, numerical aperture of the fiber, fiber characteristics and different kinds of optical fibers used for sensing will be described later.

INTRODUCTION

In the world of flower, together with lilies, gladioli, begonias; the dahlias are one of the most important and popular flowering bulbs. With the blast of different colours, shape and sizes, dahlias bring life and beauty back to the landscape in late summer and autumn. The diversity of dahlias allows their usage in many different aspects due to huge range of flower types available and fairly easy cultivation.

In modern garden, dahlias are extensively used for exhibition, garden display and decoration. It can be grown in any form in the garden; in beds, in borders or even in mixed borders alongwith other plants. It grows well in pots also. For border purpose dwarf growing type are preferred while in pots usually large flowering dahlias are grown. The long stemmed flowers of various forms and colours are used in flower arrangement. Dahlias make excellent cut flowers, which typically last about a week in the house and are also used in making garlands.

The tubers of dahlias contain appreciable amount of insulin and fructose and small quantities of phytin and benzoic acid which are of medicinal and nutritional value. Flavanone 3-hydroxylase, which catalyses the conversion of flavanones to dihydro flavonols, was detected in flower extracts of cyanic strains of dahlia.

INTRODUCTION

Narcissus is a hardy or tender herbaceous perennial, growing from bulbs and seeds. In India it is commonly called Nargis. The splendid yellow and white flowers of the narcissus alone could make April and May month of delightful sweetness in the garden. Shakespeare mentioned Narcissus again and again as common symbol of the English spring. Narcissus are highly suitable for rowin in beds ots under the deciduous trees, window garden, etc. They are very good cut flower and are sold in the market. The bulbs of the European species are used in folk medicine as these are believed to possess the purgative, dermal and depurative properties. Few species are used for extraction of essential oil in France. There is often confusion as to whether the name narcissus or daffodil should be used. Popular thought attached the former name to the sweet scented tazetta or poet narcissus and the latter to the small wild Lent Lily which is still to be found massed in the wood and open pastures. Today daffodil usually refers to long trumpet and large flowered garden forms while, all the rest are narcissus. In the simplest words, the species of this are called narcissi, although the trumpets, which have trumpet (corona or cup) as long as or longer than the surrounding petals are usually called daffodils.

INTRODUCTION

Tulips are one of the most popular and widely grown flowering plant. Tulip is a main stay of spring gardens providing abundant flowers in vivid and vibrant spectrum and colours. It is first among bulbous ornamentals due to its attractive colours and exquisite flowers. Tulip is the national flower of Turkey and tulip motifs feature prominently in Turkish folk arts. The first European cultivation of the tulips as a garden flower occurred in the Netherlands in sixteenth century. In the following century, the early enthusiasm for the new flowers triggered a speculative frenzy now known as tulipomania. The Netherlands and tulips are still associated with one other. Tulip festivals are held in the Netherlands and in North America every May. A number of bewitching cultivars grown to perfection in a large variety of delicate and brilliant shades have developed tulip cultivation into a great bulb growing industry. Tulips are not only widely cultivated for cut flower production world wide but also grown for pot culture, in beds, borders, formal and informal location. They are also suitable for growing in orchards, lawns, rockeries and wild gardens.

The word tulip industry is dominated by the Dutch tulip growers. There is 10,000 hectare of tulip bulbs grown in the Netherlands. About 70 per cent of tulip bulbs cultivated are for forcing for flowers with 30 per cent for pre packs for gardens. The world market for bulbs has been buoyant for the past ten years. Production has been increasing at the rate of 6-8 per cent per annum and the market has expanded in line with this growth. In the Netherlands, three quarters of the total bulbs produced are exported, with the highest percentage going to the United State followed by Germany. In India, tulips are gaining popularity among the flower growers owing to congenial climate in hilly areas. Particularly in Kashmir valley, production of cut flower is increasing. Some area has been increased in Himachal Pradesh. It can also be grown successfully in other hilly parts of the country like Uttaranchal between 1300 to 3000 metre above mean sea level.

Abstract

The conventional methods of pathogen identification have often depended on identification of disease symptoms, isolation and culturing of the organisms, and identification by morphology and biochemical tests. The major limitations of these culture based morphological approaches, however, are the reliance on the ability of the organism to be cultured, the time consuming nature and requirement of extensive taxonomic expertise. Furthermore, diagnosis of plant diseases can be even more difficult with asymptomatically infected propagative materials such as tree grafting stocks or potato tubers. The use of molecular methods can circumvent many of these shortcomings. Accordingly, there have been significant developments in the area of molecular detection of plant pathogens in the last three decades. The polymerase chain reaction (PCR) which revolutionised molecular diagnostics and biological sciences. In the last decade the range of targets that can be diagnosed using diagnostic PCR have grown tremendously. The very flexibility and application specific variations in the basic theme of the system have allowed the development of many PCR variants adapted to wide range of applications. Furthermore, diagnostic PCR has been greatly improved by the introduction of the second generation PCR, known as the Real time PCR where closed-tube fluorescence detection and quantification during PCR amplification (in real time) is possible eliminating the need for laborious post-PCR sample processing steps which greatly reduces the risk of carryover contamination. Using Real Time PCR, it is possible not only to detect the presence or absence ofthe target pathogen, but it is also possible to quantify the amount present in the sample allowing the quantitative assessment of the number of the pathogen in the sample. Enumerating the pathogen upon detection is crucial to estimate the potential risks with respect to disease development and provides a useful basis for diseases management decisions. Crops can be attacked by many pathogens which, in addition, often occur in complexes. Therefore, many disease diagnostic applications require simultaneous detection and quantification of several targets. Methodological limitations, however, are in many cases the reason for developing simplex or assays designed for only few targets. The DNA Microarray technology, originally designed to study gene expression and generate single nucleotide polymorphism (SNP) profiles, is currently a new and emerging pathogen diagnostic technology, which in theory, offers a platform for unlimited multiplexing capability. It is viewed as a technology that fundamentally alters molecular diagnostics. The fast growing databases generated by genomics and biosystematics research provides unique opportunity for the design of more versatile, high-throughput, sensitive and specific molecular assays which will address the major limitations of the current technologies and benefit plant pathology.

Abstract

Health-conscious consumers are increasingly seeking functional foods in an effort to control their own health and well-being. The field of functional foods, however, is in its infancy. Claims about health benefits of functional foods must be based on sound scientific criteria. A number of factors complicate the establishment of a strong scientific foundation. These factors include the complexity of the food substance, effects on the food, compensatory metabolic changes that may occur with dietary changes, and, lack of surrogate markers of disease development. Additional research is necessary to substantiate the potential health benefits of those foods for which the diet-health relationships are not sufficiently scientifically validated. Research into functional foods will not advance public health unless the benefits of the foods are effectively communicated to the consumer. Finally, those foods whose health benefits are supported by sufficient scientific substantiation have the potential to be an increasingly important component of a healthy lifestyle and to be beneficial to the public and the food industry. Mounting evidence supports the observation that functional foods containing physiologically-active components, either from plant or animal sources, may enhance health. It should be stressed, however, that functional foods are not a magic bullet or universal panacea for poor health habits. There are no “good” or “bad” foods, but there are good or bad diets. Emphasis must be placed on over-all dietary pattern, which follows the current Dietary Guidelines, and is plant-based, high in fiber, low in animal fat, and contains 5-9 servings of fruits and vegetables per day.

Key words : Horticultural Resource Information System. INARIS.

Introduction

Wide ranging Indian climatic conditions are well suited for boosting production of a variety of horticultural crops (fruits, vegetables, flower/ornamental/medicinal and aromatic crops) which presently hold an important position in the global scenario. Development was at a very low ebb till the Third Five-Year Plan and increased significantly since the Seventh Five Year Plan (Rs.10,000 millions plan outlay). Government of India established National Horticultural Board (NHB) in 1984 and Agriculture and Processed Food Products Export Development Authority (APEDA) in 1986 to facilitate its larger development. The outlay is expected to increase even more in the Tenth Plan. Significant progress has been made in area expansion of different horticultural crops resulting in higher production. Besides, use of modern technologies has also brought about improvement in productivity. More than 50 per cent increase in production is seen in many of the horticulture crops during last one decade.

The efficient planning and implementation of different developmental programs on horticultural crops depends on production parameters like soil suitability, varietals dominance, marketable surplus, marketing channels, post harvest handling practices, cost of cultivation and market availability for sustained production. In addition, information on latest technologies developed by various research organizations on horticultural improvement, production, protection and post-harvest technologies are needed to be collected and made available to the scientists, planners and managers working in the related fields. But the available information on this aspect is scattered and the database is too weak to provide adequate support for developmental strategies. The digitization of comprehensive database on horticultural crops will definitely enhance the pace of increasing the area, production, productivity and promoting industry of horticultural crops that have taken lead in the new millennium with reference to nutritional quality of food and export potential. A strong, well-knit database to support need-based, market-driven and cost-effective horticultural development is imperative. Therefore, under National Agricultural Technology Project (NATP) a Mission Mode Sub-project on “Integrated National Agricultural Resources Information System (INARIS)” has been taken up to evolve a comprehensive computerized data management system on various agricultural resources like crops, animals, fishes and natural resources by harnessing RDBMS and GIS. The Co-operating Center at Indian Institute of Horticultural Research, Bangalore has developed the “Horticultural Resources Information System” with the objectives of (i) integrating existing databases in horticulture, (ii) designing and developing a comprehensive database in horticulture and (iii) developing resource maps of major horticultural crops in the country by integrating attribute and spatial data through GIS. In addition to simple storage and retrieval it will include other functions such as manipulation and dissemination of information to various users. This database will be integrated with 13 other Co-operating Centers dealing with different agricultural resources through a virtual private network (VPN). The Lead Center at Indian Agricultural Statistics Research Institute, New Delhi provide warehouse facility with a capability to analyze the data variously and provide report as cubes, tables and graphs to form a national database to cater to the needs of the users through a website. The facility of retrieving information as value-added maps using GIS will also be built in.

Key words : Wasteland Reclamation, Poverty Indicators, Food Insecurity, Alternate Livelihood Systems, Rural Infrastructure Index.

Introduction

The countries of Asia and the Pacific region accounts for nearly two-thirds of the chronically poor and undernourished in the world. FAO estimates indicate that, by 2010, Asia will still account for about one-half of the world’s malnourished population (FAO 2000). In Asia, poverty has mainly been rural phenomenon and nearly three-fourth of the poor live in rural areas, with large majority of them dependent on natural resources for employment and income. South Asia, which had a poverty incidence of 43 percent (or about 520 million people), contributed about 40 percent of the world’s poor. Development of natural resources thus offers a potentially enormous means of poverty reduction.

In developing countries poverty and environmental deterioration are often viable in proximity to each other, and have led many to infer that a two-way causality exists between human and environmental degradation. Environmental degradation usually occurs when production and consumption activities of growing population irreversibly weaken nature’s recycling capabilities. These economic activities are also attributed to the development of markets, the advent of modern technology, and the spatial integration of inaccessible areas to market systems. In many developing countries, however, environmental degradation such as soil erosion, deforestation and pollution are most visible around poor settlements, leading some policy makers to highlight the direct links between poverty and the environment.

One has to recognize that both poverty and the environment are descriptions of states of human and natural resource attributes and cannot be reduced to simple one-dimensional cause-effect relationships. Apart from conceptual difficulties in modeling linkages, another handicap has been the absence of adequate or reliable data sets on poverty and environment characteristics. The challenge for operational research is exploring how circumstantial evidence and inductive logic can be used to explain the nature of interactions between the two states. Based on nationwide wasteland statistics vis-à-vis state and district wise poverty estimates available with the concerned agencies, this study is one such attempt, and evaluates the incidence of poverty with the backdrop of natural resources degradation and role of institutional interventions with illustrations from India.

This chapter documents shoreline changes of the Dakshina Kannada and Udupi districts of Karnataka State for the period between 1967 and 2005 studied by comparing the SOI topographic maps with IRS-1C/1D LISS-III satellite imageries through GIS techniques. Examination of coastal geomorphology, sediment flux and effectiveness of seawalls had indicated that the 130km long coastline of Dakshina Kannada and Udupi districts is essentially stable, but for seasonal variations. It has been estimated that, out of 130km, about 55km long coast is vulnerable to sea erosion, of which, 25km is covered byseawalls and covering another 10km length underway. It is revealed through field examination that protection of coastline through these measures is satisfactory only along few patches while other stretches of seawalls simply shift the zone of erosion to adjacent coastline owing to many reasons including quality of construction, unscientific positioning of seawalls, etc. It is also inferred that same is the case of many other coastlines elsewhere including Kerala coast. These experiences warrant scientific design and implementation of coastline protection measures.

INTRODUCTION

The 130km long coastal zone of Dakshina Kannada and Udupi districts is one of the densely populated coastal zones of India. The coastline is almost straight, regular and oriented towards N22°W, N12°W and N6°W directions at south of Mangalore, north of Mangalore and north of Malpe respectively. Barrier beaches and spits, ancient beach ridges, marshes, swamps and tidal flats characterize this zone. Natural features and man-made structures interrupt the shoreline. The natural features include estuarine mouths of Netravati-Gurpur rivers near Mangalore, Mulki-Pavanje rivers near Mulki, Udyavara river near Malpe, Sita-Swarna rivers near Barkur, Kollur-Chakra-Haladi rivers near Kundapur and rock exposures near Someshwar, Surathkal, Mulur, Kapu and north of Malpe (Fig. 1). The man-made structures include one major and four minor ports; breakwaters at the Netravati-Gurpur estuary, New Mangalore Port and Malpe harbor and a number of seawalls placed at various places along the coastline (Fig. 2). All these structures/features bring about local irregularity and contribute to erosion and accretion along the shoreline to some extent. Apart from these, source of beach material, coastal processes like wave refraction, longshore current, littoral drift etc.

2.1 Introduction

Topographic expression is the replica of geological structures present within the earths surface. When various types of rocks of an area are displayed on a map (sheet of paper), it is known as Geological Map. Normally geological maps prepared on topographic maps. Surface topography is best presented by contour lines on a plain paper.

The importance of geological maps is to understand the nature of structure and distribution of surface outcrops with their relation to contour lines. Horizontal and dipping beds are easily identified on map because, horizontal beds runs parallel to contour lines while inclined beds cut through different contours. The angle and direction of dip can be calculated from geological maps. Geological maps are of great importance to civil engineers, after studying geological maps and consultation with geologists, civil engineers can advice for construction of engineering structures like excavation of road cuttings and construction of canal, bridges, dams and tunnels etc. Geologists get vital clues about the geological history of an area, and can draw a cross section of an area and know the structure present underground.

Abstract

Landslides have become a recurring phenomenon in most of the mountainous regions of the world. In Indian peninsular, the landslides which were mostly confined to the tectonically active Himalayan Mountains once, have started spreading over to the other mountain belts of the Peninsula. The Tirumala – Tirupati hills, which is drawing millions of pilgrims from all over the world is facing landslides especially along the newly built southern uphill Ghat Road. The geology of the area, studied using geomatics tools like Remote Sensing, SRTM based Digital Elevation Models, GPS Survey, etc., showed that Tirumala hills is under the grip of upward tectonic movement as evidenced from the N-S and E–W oriented Pleistocene faults, intensely dissected Plateau top Cuddapah Quartzites, retreating escarpments, exhaustive debris slopes, extensive valley fills along the slopes, colluvial fills in lower slopes, palaeo debris flows along the southern and western obsequent slopes of the Tirumala hills etc. All these indicate the inherent landslide vulnerability of the slopes. The E-W trending dykes which are piercing the slopes and standing as ridges add further landslide vulnerability to such fragile slopes. So, the new ghat road laid along such southern slope is obviously facing landslides. However, the detailed geomatics based studies show that the dykes, valley fills and steep slopes are particularly more vulnerable to landslides. Though remedial measures have been broadly evolved, abandoning the southern uphill new ghat road and widening the older northern downhill ghat road seems to be the better and long term feasible alternative to prevent Landslides.

HOUSING OF LABORATORY ANIMALS

Objectives

The important criteria to be kept in mind for the construction of animal house are:

• Got to satisfy the requirements of animal care takers and animal technician whose place of work it is.
• Got to satisfy animals which are house in animal house.
• Research workers who conduct research on animal in the laboratory should be satisfied.

Materials required- Small animal house, Animal colonies, type of cages and equipments.

Weeds can be considered a significant problem because they tend to decrease crop yields by increasing competition for water, sunlight and nutrients while serving as host plants for pests and diseases. Since the invention of herbicides, farmers have used these chemicals to eradicate weeds from their fields. Using herbicides not only increased crop yields but also reduced the labor required to remove weeds. Today, some farmers have a renewed interest in organic methods of managing weeds since the widespread use of agro-chemicals has resulted in purported environment and health problems. It has also been found that in some cases herbicides use can cause some weed species to dominate fields because the weeds develop resistance to herbicides. In addition, some herbicides are capable of destroying weeds that are harmless to crops, resulting in a potential decrease in biodiversity on farmers. It is important to understand that under an organic system of weed control, weeds could never be eliminated but only managed. In organic agriculture weeds are the resources as they are mostly native to the field/areas of existence (Children’s of the soil)

GENERAL CHARACTERISTICS OF FUNGI

1. Thallus

The body of the fungus is called as Thallus, which is without stem root and leaves. It maybe Plasmodial, Pseudoplasmodial , Pseudomycelial or Mycelial. A single thread like filament is called as hypha. A hypha is made up of a thin, transparent tabular wall filled or lined with a layer of protoplasm.

A group of hypha constituting the body of fungus is called as mycelium may be septate or aseptate. i.e coenocytic.

a) Coenocytic or Nonseptate or Aseptate Mycelium

When mycelium is not divided by cross walls called as Cornocytic mycelium.

Depending upon the nature of parasitism with the host plant, mycelium is either ecotophytic or endophytic.

b) Septate Mycelium

When mycelium is divided by cross walls or septa called as septate mycelium.

INTRODUCTION

The current food crisis has put the agriculture production on a tight leash, not allowing the producers any lassitude whatsoever. Even though we have outgrown from our ‘ship to mouth existence’; our least negligence can torpedo our efforts to maintain the steady state of progress achieved in food grain production. Around 35% of what is produced is lost due to pest and diseases. In this situation, plant protection assumes significance. Unfortunately our plant protection regime begins and ends with pesticides. It is the default option in the plant protection menu and all the other options more or less remain defunct and unused. Even though, our major thrust areas of plant protection are promotion of Integrated Pest Management: ensuring availability of safe and quality pesticides for sustaining food production from the ravages of pests and diseases, streamlining the quarantine measures for accelerating the introduction of new high yielding crop varieties, besides eliminating the chances of entry of exotic pests; we remain largely insulated from these aspects in IPM.

With the Globolization and liberalization in International trade of plants and plant material in the wake of Sanitary and Phytosanitory (SPS) Agreement under WTO, the plant quarantine measures have become more imperative. Liberalization of trade policies have helped the world agriculture trade to prosper which is key sector for many countries like India whose economies are dependent on agrarian industry. But the likehood of the presence of disease/pest inherent in the import material can very well geopardize the trade. Activities are meant to help agricultural development and Plant quarantine service are charged with the responsibility of preventing the entry of hazardous pests, pathogens and weeds, but to deny entry of valuable genetic re-sources would be against national interest. These activities are meant to help agricultural development and they are complementary to each other and therefore are necessary, and we on our parts need to be fairly vigilant. As has been very truly said-An ounce of prevention is worth a pound of cure.

1. Cattle
2. Buffaloes
3. Sheep
4. Goat
5. Swine
6. Camel
7. Rabbit
8. Poultry

Animal husbandry

Animal husbandry is the branch of science concerned with the care and breeding of domestic animals such as cattle, hogs, goat, sheep and horses.

India supports nearly 20% of the world livestock and 16.8% human population with a land area of only 2.3%. India leads in cattle and buffalo population and has world’s second largest goat and third largest sheep population. As per the 19^th Livestock census (2012) cattle (191 millions), buffalo (109 m), Sheep (65 m), goats (135 m), pigs (10.29m), camels (0.4 m) and poultry (729.2 m) population was reported in India. The total livestock population has decreased by about 3.33% over the previous census. India’s milk production increased from 43 million tonnes in 1983 to 155.5 million tonnes in 2015-16 (annual growth of 6.27%) and stands first in milk production in world.. The egg production is around 82.93 billion during 2015-16. The per capita availability is around 66 eggs per annum. The poultry meat production is estimated to be 3.26 million tonnes. Wool production (43.6 million Kgs) and meat production is 7.0 million tonnes in 2015-16.

Abstract

Seaweeds are the large marine algae that grow almost exclusively in the shallow waters at the edge of the oceans. Seaweeds are rich sources of many bioactive compounds and nutraceuticals. These factors are considered under two categories: Seaweed phytochemicals and Seaweed polysaccharides. They are rich in soluble dietary fibers, proteins, minerals, vitamins, antioxidants, phytochemicals, and polyunsaturated fatty acids, with low caloric value. The red, brown and green seaweeds have been shown to have therapeutic properties for health and disease management. Usually they are only used as gelling agent and stabilizers in the food and pharmaceutical industries, but current research has revealed their potential medicinal uses against many diseases like cancer, allergy, diabetes, oxidative stress, inflammation, thrombosis, obesity, hypertensive and other degenerative ailments. In line with other natural foods like fruits, vegetables and grains, there has been marked interest within the scientific community to assess which fractions of seaweeds may be linked to the historically observed health benefits. As consumer health and nutrition become more influential in the food industry, the use of seaweed as an ingredient is on the rise in product development. For several centuries there has been a traditional use of seaweeds as food in China, Japan and the Republic of Korea. This review undertakes successful exploration of potential of seaweed gums as an functional ingredient in a number of food applications. This addition has the potential to enhance the nutritional quality of a product and hence human health.

ABSTRACT

Leaf N and chlorophyll (Chl) concentration of crop are important indicators of plant nitrogen status. Laboratory determination of plant tissue N is time consuming and costly. Also remote sensing is quickly becoming recognized as a valuable tool that has the potential to asses a wide variety of physiological properties over a large area in a short amount of time. This study examined the relationship of sorghum and bajra canopy reflectance spectral response to its nitrogen and chlorophyll content. The study consisted of two nitrogen level (N₀ : no nitrogen and N₁: recommended dose of nitrogen for each crop) for two crops (sorghum and bajra) . Chlorophyll and N content were measured throughout the growing season for both crops. Reflectance at increased significantly as N fertilizer rate decreased. Chl and N were strongly related to canopy reflectance for either individual wavelength or for spectral vegetative indices or ratios. Sorghum nitrogen fertilizer rate mainly affected leaf reflectance at 575 and 623 nm, while bajra at 565 and 657nm. The reflectance values at 581 and 603 nm had the highest correlation with sorghum leaf N concentration. Similarly, bajra leaf N concentration was highly correlated with 619 and 696 nm. Sorghum and bajra leaf N concentrations were highly correlated with reflectance ratio of R₅₈₁/ R₃₈₁ (r²= 0.44*) and R₆₁₉/R₄₆₂ (r²= 0.78***) respectively with greatest r² value. Similarly, Sorghum and bajra leaf Chl concentrations were highly correlated with R677/R527 (r²= 0.63**) andR688/R409 (r²= 0.71***) or R615/R411 (r2=0.71***),

respectively. Thus our results suggest that spectral reflectance measurements hold promise for the assessment of some physiological parameter at the leaf level real time monitoring of sorghum and bajra N status and N fertilizer management.

There are several types of features and structures of the gardens. The design, material and placement varies from one type of garden to others. However, there are some basic requirements in every type of gardens. Common features and structures of the gardens are described hereunder for providing some basic information.

Boundary

Material and construction of the outer boundary is to be considered depending upon the size and type of garden. Protection, permanency and cost of construction are the main factors. It should be well designed and an architectural show piece co-relating with type and design of the garden. Ornamental creepers are planted along the boundary wall and trained over the same for further beautification purpose.

Rose is most popular of all garden plants and regarded as queen of the flowers. Various colours, forms, fragrance of the flowers are major attraction. Roses are generally grown as bedded plants but can successfully be grown in pots also. Therefore, those who do not have land for bedding purpose may grow them in pots. Every kind of garden has scope for growing roses in various forms. In home garden, growing roses is always preferred. A single bloom of rose creates a tremendous sensation and enjoyment to the house owner. Similarly, public parks, institutional, factory and temple gardens have equal scope for growing roses in beds. There are large numbers of cultivars available in the horticultural trade and one has to select them depending upon the garden type, climatic conditions and purpose of the garden.

Species and Cultivars

Rose (Rosa sp.) is a woody perennial belongs to the family Rosaceae. There are about more than 100 species having varied growth habit ranging from erect shrub to climbing and miniature. Similarly, flowers have different forms, size, colour and fragrance. Majority of the species are native to India while a smaller number is native to Europe, North America and northwest Africa. Species found in India are - Rosa clinophylla (R. involucrata), R. foetida, R. gigantea (R. odorata var. Gigantea), R. leschenaultiana, R. moschata, R.macrophylla etc.

For development of garden roses, following eight species had main contribution as parental species - Rosa chinensis, R. damascena, R. foetida, R. gallica, R. gigantea, R. moschata, R. multiflora and R. wichuraiana. Inter-species crosses between Chinese roses and European started the development of modern roses.

Bonsai is the art and science of dwarfing plants and growing them in shallow containers. The word ‘Bonsai’ is a Japanese term consisting of two words, ‘Bon‘- a shallow container and ‘sai’ - to plant. Therefore, bonsai is a technique of growing plants (trees, shrubs and others) in shallow containers in dwarf form. With the help of pruning, pinching and training a three dimensional effect is produced. It is a kind of living sculpture and idealized nature in miniature. An ideal bonsai is replica of a particular plant or an artistic variation in shape whose different parts are in complete harmony. Development of bonsai requires an artistic eye, skills on training, pruning and knowledge on growing plants in containers.

This technique was developed by the Chinese over 2000 years ago and later excelled by the Japanese. Bonsai is now popular all over the world and very useful for the people who are living in flats and have no scope to have outdoor gardens. Every house owner likes to have few specimen plants for interior decoration. Bonsai provides them an additional opportunity to grow more number of plants being dwarf in nature. Considering its present popularity, Bonsai is now important horticulturally for its commercial and aesthetic value.

Floral decoration in India has got a historical background spreading over different eras. Admiration of natural beauty, plants and flowers were part of civilization process. Many evidences are there in the paintings, carvings on wall of caves, temples, mosque besides literatural references that flowers were in use in many forms since time immemorial. Every religion, culture, rulers and regimes had great influence on the use of flowers.

At present, flowers are integral part of our daily life. We use flowers in various ways and for many purposes. Loose flowers are used for worship while garlands for decoration purpose during social, institutional, official functions etc. In addition, cutflowers in the form of bouquets are very common in use. Arrangement of flowers in the vase, bowl or any other container is displayed extensively for interior decoration. At present, placing flower vase is very popular in houses, corporate offices, institutes, hotels etc. and is a well established practice.