eChapters

Liver is one of the largest and most sensitive organ in the body performing important role in digestion and metabolism; regulation of nutrient; and production of proteins, enzymes, hormones, clotting and immunological factors. Liver also plays significant role in detoxification. Liver is affected in both primary and secondary liver diseases. Clinical signs of the hepatic dysfunction appears only after a large portion of the liver (about 75%) is inactive because liver has a large reserve of function. Therefore, a systematic clinico-pathological examination of the liver becomes mandatory to identify liver abnormalities. Clinical Signs of The Liver and Biliary Disease Jaundice (pre hepatic, hepatic, post hepatic or extra hepatic), nervous signs (hyperexcitability, convulsions, coma, weakness, muscle tremors, dullness, compulsive walking head pressing, mania),

Respiratory examination is essential for identifying abnormalities of the upper and lower respiratory tract and determining the location and severity of disease. This chapter describes systematic evaluation using observation, inspection, palpation, percussion and auscultation. Respiratory rate, effort, pattern, nasal discharge, coughing and abnormal respiratory sounds are important clinical findings. Examination of the thorax and lungs helps identify changes associated with respiratory disorders. Advanced diagnostic approaches and sampling techniques may further support diagnosis. The chapter provides practical guidance for evaluating respiratory function in veterinary patients and emphasizes systematic examination for differentiating respiratory disease from abnormalities originating in other body systems.

The musculoskeletal system provides structural support, protects organs and enables movement. Diseases involving muscles, bones, joints, ligaments and tendons commonly produce lameness, pain, weakness, reduced mobility and deformity. This chapter presents general and special examination techniques for evaluating musculoskeletal abnormalities. Assessment includes observation of posture and gait, palpation of muscles and joints, evaluation of swelling, pain and abnormal movement, and examination of limbs and feet. Additional diagnostic procedures may be used to localize lesions. The chapter provides practical guidance for systematic examination and emphasizes accurate identification of affected structures to support diagnosis and appropriate clinical management.

Udder examination is essential in dairy animals because mastitis directly affects animal health, milk quality and farm productivity. This chapter presents practical examination of the udder and teats, including inspection and palpation for abnormalities. Mastitis detection methods include the California Mastitis Test and other milk-based diagnostic procedures. Evaluation of milk characteristics, somatic cell changes and laboratory findings helps identify inflammatory and infectious processes. Appropriate sampling and interpretation support selection of effective treatment. The chapter also emphasizes the importance of early detection and systematic udder examination in maintaining milk quality, preventing production losses and improving overall dairy herd health.

Veterinarians may encounter disease outbreaks, sudden increases in illness or unexplained changes in herd production. This chapter presents practical approaches to investigating and controlling such outbreaks. Effective investigation requires systematic collection of clinical, epidemiological, management and environmental information. Identification of affected animals, temporal patterns, potential sources and routes of transmission helps establish possible causes. Appropriate diagnostic sampling and laboratory investigations support confirmation. Immediate control measures may include isolation, biosecurity, treatment, vaccination and environmental management depending on the suspected disease. The chapter emphasizes organized outbreak investigation, rapid decision-making and coordinated control measures to limit disease spread and reduce losses.

Besides physical examination, there are many diagnostic techniques for making a specific diagnosis of respiratory diseases. The specialized techniques are used by the specialists. These specialized examination techniques include collection of nasal and brochoalveolar samples either using nasopharyngeal swab or flexible fiber endoscopy and their laboratory examination; pleuroscopy; thoracocentesis; thoracic radiography; and thoracic sonography. Collection of Respiratory Tract Discharges/Fluid The respiratory tract discharges (nasal, bronchoalveolar fluid) can be collected using nasopharyngeal swabs and flexible fiber optic endoscope or flexible tube. Nasopharyngeal swab collection Nasopharyngeal swabs have been used to identify PI3 and IBR infections. Pasteurella isolates may be commensals. Bronchoalveolar samples are more exact than nasopharyngeal swabs in identifying

Peritoneal Fluid Peritoneal fluid (PTF) is an ultra-filtrate of plasma. The amount of the fluid and its constituents depends on oncotic and hydrostatic pressures, vascular permeability, mesothelial lining integrity, and lymphatic drainage. In healthy animals, the amount of peritoneal fluid is negligible making its aspiration difficult. However, in large animals, a small volume (up to 5ml) can be aspirated. Volumes of 10ml or above may indicate a pathological process in the abdominal cavity, unless the animal is in late pregnancy. Indications for collection and analysis The collection and analysis of peritoneal fluid is important in the diagnosis of diseases of the peritoneum and the abdominal segment of alimentary tract .Increased accumulation of peritoneal fluid may be evident in congestive heart failure, peritonitis, nephrotic syndrome,

Musculoskeletal system consists of muscles, cartilage, bones, joints ligaments and tendons. Primary function of the musculoskeletal system is to support the body, helps in mobility, and protects vital organs of the body. Diseases of these organs have clinical manifestations such as lameness, failure to support weight, inefficient joint movement and deformity. Examination of musculoskeletal system includes general as well as special examination. General examination consists of examination of posture in sitting/recumbency, standing position and while rising; examination of gait; and any other abnormality. General Examination The animal is observed for conformation (outline and shape), symmetry and posture in standing position from the cranial, caudal and lateral positions. Asymmetrical shape of the body or limbs may be due to swelling that should be examined by palpation,

The udder is responsible for milk production. It is composed of four mammary glands each with its own teat (Fig. 167). Swelling of udder or teats is an indication of udder disease warranting clinical exploration and palpation. Visual examination the udder (before and after milking) and palpation is of great significance in detecting abnormalities. The udder is visually inspected from back and sides for symmetry and also palpated thoroughly. Palpation is a simple, quick and easy routine diagnostic tool for mastitis detection. Teats and supra mammary lymph nodes should also be palpated. These examinations aid in detecting fibrosis, inflammation or atrophy. Diffuse fibrosis gives the quarter a firm feeling. Areas of local fibrosis may vary in size and shape. Hot, painful and diffuse swelling with marked abnormality of mammary secretion is seen in acute mammary inflammation (acute mastitis). Atrophy of the gland is the terminal stage of chronic mastitis. With the development of gangrene, the area becomes cold and bluish. Five point palpation scores (Petrovski et al., 2011; Hogan et al., 1995; Scaletti and Harmon, 2012)

Herd A large number of animals that live and feed together in a group (Fig.197) is called as herd. In herd, all animals are considered as a unit rather than individual. Herd medicine, also known as herd health or production medicine, is the discipline of veterinary medicine that deals with the diagnosis, treatment and prevention of the diseases in the herd as a whole. Concept and Significance of Herd Health Herd health is a combination of regularly scheduled veterinary activity and management practices undertaken to maintain optimum health to achieve optimum production in the farm. Traditionally, the aim of the herd health is to control or eliminate diseases and rectify management inefficiencies impacting the welfare and productivity in the frame work of risk monitoring and assessment in conjunction with best farming practices. The main emphasis

Infectious diseases are illnesses caused by pathogens such as viruses, bacteria, fungi and parasites. Infectious diseases usually spread in animals through contact, contaminated food or water and through bug bites. Some infectious diseases are minor while others are very serious. Infectious diseases in the production animals are of great economic concern owing to losses though morbidity, mortality, reduced production, increased food insecurity, public health concern, increased cost of veterinary care etc. Therefore, prevention and control of infectious diseases of animals is very important for food security and safety, public health, animal welfare, access to market and alleviation of rural poverty. Key Factors for Effective Pevention and Control of Infectious Diseases The key factors for effectiveness of prevention and control strategies of infectious animal diseases are, (i) effective surveillance (active i.e. planned; or passive i.e. event based), (ii) an early detection of infection (making an early diagnosis with laboratory support), (iii) transparency and rapid response mechanism; and(iv) good governance.

Sometimes veterinarians have to deal with disease outbreaks and unexplained changes in herd production. In this situation, broad objectives of the clinician are:- i) To halt the progress of disease ii) To determine the reasons of outbreak iii) To recommend the procedures to reduce the risk of future outbreaks Terminology used in Disease Outbreaks The following terms are commonly used Outbreak - It defines as a sudden increase in the occurrences of a disease when cases are in excess of normal expectancy in the population for the location, season or species. It may affect a small and localized group or may affect a large number of animals. Epidemic- It has been described as an unexpected increase in the number of cases of a particular disease in a specific geographical area. In another words an epidemic is an rapid spread

Livestock plays a vital role in any country’s economy as animals are a source of livelihood for people, providing milk, meat, and fur, and are used for agricultural work. Hence, the loss of animals due to disease or any other reason results in loss of wealth, livelihood, and nutrition. In view of this, management of mortality on farms is of utmost importance. There are different ways to manage and dispose of dead animals. The acceptable methods to manage mortality include composting, rendering, incineration, landfills, burial, and disposal pits. Composting is one of the options for managing mortality on farms. Composting is the decomposing of carcasses by natural processes, viz the use of bacteria, fungi, and other microorganisms to convert organic matter into a stable product called compost. Composting involves the degradation of the carcass by anaerobic bacteria to convert it into liquid material with odor and gases such as hydrogen sulfide and ammonia)The anaerobic process produces heat that kills many viruses and bacteria and allows the growth of only heat-tolerant bacteria)The temperature continues to rise and peaks between 130 to 160 0F. Composting requires a source of energy

Soil chemical properties determine the availability, retention and movement of nutrients and strongly influence plant growth under irrigated conditions. This chapter introduces the fundamental chemical characteristics of soils, with particular emphasis on exchangeable bases, cation exchange and anion exchange. Cation exchange capacity (CEC) is discussed as an important indicator of the soil's capacity to retain and exchange nutrient cations. The chapter explains the principles and reactions involved in cation exchange, cation selectivity and the determination and expression of CEC. Relationships between CEC, soil pH and particle size are also considered, together with the concept of base saturation. These properties are important for understanding nutrient availability and fertilizer management in different soil types. The chapter further introduces the mechanism of nutrient uptake by plant roots, linking soil chemical reactions with plant nutrition. Understanding these processes provides an essential basis for managing soil fertility, improving nutrient-use efficiency and maintaining productive irrigated soils.

This chapter focuses on the structure, classes, properties and biological functions of immunoglobulins. It introduces the basic antibody molecule, including heavy and light chains, variable and constant regions, antigen-binding sites and Fc fragments. The characteristics of IgG, IgM, IgA, IgE and IgD are examined in relation to their distribution and immune functions. Questions cover primary and secondary immune responses, placental transfer, mucosal protection, allergic reactions, complement activation and agglutination. The chapter also addresses antibody affinity, avidity, isotypes, allotypes, idiotypes, class switching and Bence-Jones proteins. It provides essential knowledge of how antibodies recognize antigens and contribute to immune protection and diagnosis.

High Humidity Hot Air Impingement Blanching (HHAIB) is a modern blanching technology developed to overcome several limitations associated with conventional blanching. This chapter introduces HHAIB as a pretreatment used before drying, freezing, canning and frying, particularly for fruits and vegetables. It explains the underlying principle of high-humidity hot-air impingement and its effects on heat and mass transfer. The chapter discusses applications in pre-dehydration treatment, colour preservation, texture and structural integrity and enzyme inactivation. Comparative analysis with conventional blanching methods highlights its potential advantages in drying efficiency, quality retention and energy utilization, making HHAIB an important emerging technology for modern food processing.

This chapter explores how ergonomics is evolving in response to technological innovation, demographic change, globalization and sustainability. It traces the discipline’s progression from classical physical ergonomics to cognitive, organizational, integrated and smart ergonomics. Emerging applications of artificial intelligence, machine learning, robotics, wearable sensors, virtual systems and real-time data analytics are examined. The chapter also considers adaptive workspaces, human–robot collaboration, remote work and inclusive design for an ageing and increasingly diverse workforce. Future ergonomists are presented as strategic contributors to human–technology integration rather than only assessors of posture and physical risk. Ethical, economic and accessibility challenges accompanying technological transformation are also considered

This chapter examines how people perceive, process and respond to information in technology-rich work environments. Cognitive ergonomics is introduced as the study of mental processes—including attention, memory, perception, reasoning and decision-making—in human-system interaction. The chapter explains how excessive mental workload, digital interruptions, poorly organized information and confusing interfaces can increase fatigue and errors. Principles for designing clear displays, intuitive controls, effective feedback and manageable information flows are presented. Particular attention is given to concentration, situational awareness, decision support and error prevention. The chapter demonstrates that modern workplaces must support both the physical body and the cognitive capacity of users to achieve safe, reliable and productive performance.

This chapter applies ergonomic principles to hospitals, clinics, laboratories and other healthcare environments. Healthcare personnel encounter demanding physical tasks, emotional pressures, complex decisions and extended working hours. Common risks include patient handling, repetitive movements, prolonged standing, awkward postures, mental overload and poorly designed workstations. The chapter considers physical ergonomics, workflow design, cognitive support and stress management as complementary approaches to improving healthcare delivery. Safe patient-transfer techniques, adjustable furniture, accessible equipment and logically arranged clinical spaces are discussed. By reducing fatigue and occupational injury, ergonomic interventions can improve staff health, job satisfaction, patient safety, clinical accuracy and organizational efficiency while decreasing absenteeism and employee turnover.

This chapter explores how ergonomic design influences learning, teaching and well-being in schools, colleges and universities. It examines classrooms, laboratories, libraries, study spaces and digital environments as integrated physical and cognitive systems. Appropriate furniture dimensions, adjustable seating, suitable desk heights, lighting, ventilation, acoustics and equipment placement can improve posture, concentration and participation. The chapter also considers anthropometric differences among learners of different ages and abilities. Technology must be incorporated without increasing visual fatigue, physical strain or cognitive overload. By combining human-centred spatial planning with flexible furniture and supportive environmental conditions, educational institutions can create safer, more inclusive and effective settings for both students and teachers.

Bio-Inputs introduces the concept, scope, and functional diversity of biological inputs used in sustainable agriculture and natural farming. The chapter classifies bio-inputs by core components, including microorganisms, biological extracts, and biomolecules, and then by functions such as bio-fertilizers, bio-stimulants, biomejorators, and biological control agents. It also presents microbial and biological inputs within Integrated Pest Management, emphasizing biopesticides, biofungicides, and plant-defense elicitors. Examples such as Rhizobium, Trichoderma, Bacillus, Pseudomonas, seaweed extracts, vermiwash, neem extracts, and oligosaccharins illustrate how biological resources can improve nutrient availability, plant growth, crop protection, stress tolerance, and ecological sustainability. in contemporary agricultural practice. for sustainable crop production.

Initiatives for Promotion of Bioinputs presents government, institutional, state-level, NGO, and private-sector efforts supporting natural and sustainable farming. Central initiatives discussed include Paramparagat Krishi Vikas Yojana, Bharatiya Prakritik Krishi Paddhati, National Mission on Natural Farming, ICAR initiatives, National Project on Organic Farming, Bio-Input Resource Centres, farmer incentives, CISS, MOVCDNER, and PM-PRANAM. State examples include natural-farming initiatives in Andhra Pradesh, Karnataka, Himachal Pradesh, Gujarat, Madhya Pradesh, and Tamil Nadu. The chapter also considers NGOs, voluntary organizations, farmer networks, startups, and private-sector participation. Together, these initiatives illustrate institutional pathways for scaling bioinputs and strengthening natural farming adoption. for adoption by farming communities.

Need of Bioinformatics

Bioinformatics, an emerging area offering a fundamental tool to the scientific community, to speed up the research, application and commercialization of biotechnology. In fact the best thing, which has happened towards the end of the 20^th century and in the 21^st century, is the marriage between biotechnologists and information technologists leading to the growth and development of this field. India took a lead as early as in the 1980s but more precisely from 1986 onwards by establishing a strong base of Bioinformatics with the necessary infrastructure. As a result one has seen major breakthroughs in biology and the growth of biotechnology has been phenomenal in the last decade, especially with the most outstanding technological breakthrough of the 20^th century wherein the draft human genome sequence was completed in 2000 and now the genetic code is completely sequenced. This has provided the worlds scientific community information on the vast sequence and structure of the Genomes, the crystal structures and there is an increasing dependence on computational approaches. Biotechnology has emerged as a front-line area with vital significance in unraveling secrets of life, particularly in the studies of new biology and biotechnology. The genomic revolution has underscored the central role of Bioinformatics in understanding the very basic of life processes.

Introduction

Castor (Ricinnus communis L.) is an important non-edible oilseed crop and occupies an important place in the country’s vegetable oil economy. The crop is mostly confined to Gujarat, Andhra Pradesh and Rajasthan. Although other states like Tamil Nadu, Karnataka, Orissa, Maharashtra, parts of Madhya Pradesh, Bihar and Chhattisgarh cultivate castor, their contribution to either area or production is limited. Presently, castor is grown over an area of 8.7 lakh hectares with a production of 11.7 lakh tonnes and productivity of 1352 kg/ha in the country (2008-09). Castor oil finds application in manufacture of a wide range of ever expanding industrial products such as nylon fibres, jet-engine lubricants, hydraulic fluids, soaps, varnishes, paints, medicines and a host of similar other products. Castor cake is used as manure and also as nematicide. Gujarat and Andhra Pradesh put together contribute to 68.5% of the total castor area and 80% of the total castor production in the country. The crop has been cultivated under resource-rich irrigated conditions in Gujarat with very high productivity (1963 kg/ha), while in Andhra Pradesh, the crop has been cultivated under rainfed and poor resource management conditions, with very low productivity (509kg/ha).

Walking machine: A machine designed to carry its operator over various types of terrain; the operator sits on a platform carried on four mechanical legs, and movement of his arms control the front leg of the machine while movement of his legs control the rear legs of the machine.

Wane: Wane is a defect in a timber or plank.

Washer: A small, flat, perforated disk, used to secure the tightness of a joint, screw, etc.

Washer cutter: A device having a fixed center and either one or two adjustable cutting points for cutting washers from leather, rubber, etc.

Waste heat: Energy, that must be dissipated to the atmosphere from a process such as the heat transferred from condensing steam in the condenser of a steam power plant.

Waste spark system: An ignition system, that energizes the spark each time the piston is at top dead center whether or not the piston is on the compression stroke or on its exhaust stroke. For hydrogen engines, the waste sparks are a source of pre-ignition.

Water (H₂O): 1. A colorless, transparent, odorless, tasteless liquid byproduct of the combining of hydrogen and oxygen, 2. The liquid form of steam and ice. Fresh water at atmospheric pressure is used as a standard for describing the relative density of liquids, the standard for liquid capacity, and the standard for fluid flow. 3. The melting and boiling points of water are the basis for the Celsius temperature system. 4. Water is the only substance that expands on freezing as well as by heating, and has a maximum density at 4°C.

A. Write True or False
    1.    Bulk density is the true density of the soil.
    2.    Igneous rocks are acidic in nature.
    3.    Adhesion is the attraction of like molecules.
    4.    pH is the negative logarithm of Hydrogen ion concentration.
    5.    Limestone is a sedimentary rocks.
    6.    Size of the gravel is more than 2mm.
    7.    Black and dark colour of soil is due to organic matter and iron.
    8.    Soil moisture tension at Permanent wilting point corresponds to 15 atm. 
    9.    Micropores are the large pores present in the soil.
    10.    Oxidation is the removal of oxygen from the minerals.
    11.    Straight fertilizer contains only one nutrient.

22.1 Introduction

Nanotechnology has proved to have infinite potential in increasing the quality of life of the human population. There is however, a growing realization regarding the potential health and safety risks of associated with development, production and application of these nanoparticles. Nanoscale particles are produced from a variety of different processes. Nanoparticles are the end product of a wide variety of physical, chemical and biological processes, some of which are novel and radically different, others of which are quite commonplace. Nanometer sized particles are also found in the atmosphere where they originate from combustion sources (traffic, forest fires), volcanic activity, and from atmospheric gas to particle conversion processes such as photochemically driven nucleation. A large quantity of nanoscale particles are also produced during the various human activities, Welding can generate large quantities of nanoparticles usually in the form of a well defined plume of aggregated nanoparticles.

Wafer : A thin crisp cake, candy, cracker or chips is known as wafer.
 
Waffle : A crisp cake of batter baked in a waffle iron is called waffle

Warner-Bartzler Shear : It is one of the oldest but commonly used devices used to measure the tenderness of meat. It is used to test the quality in the cooked meat.

N₂O: Nitrous Oxide.
Naphthalene Acetic Acid (NAA): Is represented which is a synthesised auxin.
Naphthalene ring/molecule: Two benzene rings condense to give the naphthalene molecule/ring.
Natality (birth-rate): i) It refers to the production of new individuals by birth or hatching. The natality rate is the number of young ones produced per female. ii) Refers to number of young individuals born or hatched per unit of time. iii) Refers to an organism or population of organisms that occurs naturally (i.e., independent of human activity) in an area.
Natural forest: A forest composed of indigenous trees and not classified as forest plantation. 

Trace minerals have long been identified as essential components in the diets of domestic livestock species. Trace minerals exist in cells and tissues of the animal body in a variety of chemical combinations, and in characteristic concentrations, depending on the trace mineral consumed and the tissue in which it is metabolized. Concentrations of trace minerals must be maintained within narrow limits if the functional and structural integrity of the tissue is to be maintained and the growth, health, and productivity of the animal are to remain unimpaired. Minerals are as vital to cattle as grass, water or air.

Certain casualties which are encountered in clinical practice are viz. acute peritonitis, anaphylactic shock, respiratory distress, cardiac arrest, ingestion of foreign bodies, hypomagnesemic tetany, diabetic ketoacidosis, toxic mastitis and poisoning. These patients required critical care, the critical patients are those patients whose conditions are capable of changing on a minute to minute or hourly basis or patients who could rapidly deteriorate in short notice. Proper treatment of emergency disease can help in the diagnosis of specific poisoning or disease on the basis of treatment response.

Principle

The nitrogen of protein and other compounds is transformed into ammonium sulphate by acid digestion with boiling sulphuric acid. the acid digest is cooled, dilute with water, and made strongly basic with sodium hydroxide. The released ammonia is distilled into a boric acid solution or standard sulphuric acid solution. When boric acid is used to collect ammonia then is the titrated with standard sulphuric acid or standard hydrochloric acid. When standard sulphuric acid is used to collect ammonia then it is titrated with standard sodium hydroxide solution.

(Method of Froesch and Renold, 1956; Froesch et al., 1957)
Enzymatic with Glucose-oxidase / Peroxidase

Introduction

Glucose oxidase enzyme specific for the oxidation of glucose, was discovered in a fungus preparation by Müller in 1928. This enzyme is present in bacteria and in moulds such as (Pencillium notatum), which promotes the oxidation of glucose (b-ring form) to gluconic acid with the production of an equivalent amount of hydrogen peroxide. Normal values for whole blood glucose oxidase are 60 to 90 mg/100 ml. Results by the enzyme methods are lower than by the best “true  sugar” reduction methods largely because of their specificity, but inhibition of glucose oxidase by uric acid may be a contributory factor. In suspected cases of diabetes, values below 120 mg per 100 ml call for further investigation, for example, by glucose tolerance test. Due to the presence of glycolytic enzymes in red cells, blood must be collected into an antiglycolytic/anti-coagulant preservative, if there is to be a delay of more than 1 to 2 h. in processing or estimation. A fluoride/oxalate mixture, containing 2 mg of fluoride per ml of blood, is suitable and the glucose content will then remain unchanged for upto 3 days at 4ºC.

For the first time, isotope dilution analysis was introduced by Hevesy and Hafer in 1934, but it was not until 1940, the usefulness of isotope dilution technique was revived by Rittenberg and Foster (1940). There are three general types of isotope dilution methods. These are (a) direct (b) inverse and (c) double isotope dilution. In general isotope dilution methods may be used for the following type of studies.

    (a)    In isolation purification and identification of unknown intermediate in a chain of metabolic reactions.

    (b)     To obtain evidence of synthesis (incorporation), and precursor-product relationships between known compounds.

    (c)    As an analytical tool in the assay of known compounds. In isotope dilution techniques, the labelled intermediate, which is being diluted by unlabelled carrier, is a known compound.

(Method of Bryant et al., 1959)

Strontium and barium are adsorbed on a cation-resin column, and  after a suitable gowth period, yttrium-90, the daughter of strontium-90, is selectively eluted. The yttrium-90 is then adsorbed on and eluted from a second cation-resin column and counted. The radiochemical yield is greater than 97% gravimetric measurement of the recovery of strontium and yttrium carriers is not required. The method, with modifications, is applicable to samples that contain 100 mg of iron or uranium.

Unit of Length

A metre (m) is taken from the international prototype metre at the International Bureau of weights and measures; at 32ºF. (0ºC) = 39.37 inches (in.) = 3.280833 feet (ft.) = centimetres (Cm.). A centimetre (Cm.) = 10 millimetres (mm.) = 10,000 microns (µ) = 0.337 inch (in.) or 10-4cm. A millimetre (mm.) = 1,000 microns (µ) = 0.03937 inch. A micron (mµ) = 1,000 milli-microns (µ) = 3.937x10-5 inch. A milli-micron (mµ) = 0.001 micron or 10-7 cm. A foot (ft.) = 0.3048006 metre (m.) = 30.48006 centimetres (Cm.) = 12 inches (in.)., inch = 2.5 cm. An inch (in.) = 2.539998 centimetres (Cm.) = 25.39998 mm = 25,399.98 microns (µ).

Estimation of Calcium in Feeds, Fodders and Faeces
(Titrimetric method of AOAC, 1965)
Principle

When a solution containing calcium is treated with ammonium oxalate, all the calcium present is precipitated as calcium oxalate, The precipitate on treatment with sulphuric acid dissolves, forming calcium sulphate liberating free oxalic acid which is quantitatively estimated by titration against standard N/10 potassium permanganate solution to arrive at the calcium content present in the given solution. The reactions which take place are given below:

Plum (Prunus saliciana Lindl.) is a temperate fruit and grows on commercial scale in J&K, HP and Uttaranchal. In J&K, plum cultivation is spread over 4,038 hectares with total yield of 10,112 metric tones. In Jammu Division, plum is being grown in temperate areas of Poonch, Rajouri, Doda and Kathua districts covering an area of 2,665 hectares with an annual production of 14,240 metric tonnes.

Climate and Soil

Plums because of their wide variability between different species, exhibit considerate varietal differences in their climatic requirements. The Japanese plums do very well in the low and mid hill regions ranging between 650 to 1650 meters above mean sea level. Some varieties can be grown successfully in the warmer regions of plains.

For good growth and longer life of plants, well drained medium to deep soils are most suitable. Plums propagated on peach root stocks grow better on sandy loam soil, while for heavier soils apricot rootstock or Kabul green gage root stocks of plum can be used.

Introduction

Water is one of the most complex natural resources demanding a comprehensive understanding of its inherent features in occurrence and distribution for an integrated planning aimed at optimum development for agriculture, health, industry, power, etc. The well being and development of our society is dependent on the availability of water. An increase in groundwater development and utilization for industries and urban water supply has created improper disposal of liquid waste. Defective well constructions, sewage and waste disposal in man made lakes within city, open quarries with water and failure to seal the abandoned wells in city area have provided possible openings for downward movement of polluted water into subsurface formations without undergoing the process of natural filtration.

Introduction

In addition to role of iron oxidation in commercial point of view there are certain implication of iron oxidation on environment. Acid Rock Drainage (ARD) is one of the example of environmental pollution. Coal and various metal ores are enclosed in geological formation of reduced nature. Coal, is often associated with pyrite (FeS₂).When mining activities expose this material to atmospheric oxygen, a combination of auto oxidation and microbial iron and sulfur oxidation produces large amounts of acids. The iron-rich acidic mine drainage kills aquatic life and renders the contaminated stream unsuitable as a water supply or for recreational use.

Introduction

It has been observed that the surface waters are getting polluted due to improper disposal of domestic and industrial wastewaters. Most of the River basins which are major supply of water for human activities are polluted. Even the groundwater in not spared because of the incessant growth of the population in India. In Maharashtra the number of bore wells has been increased to 5 Lakhs from 1 Lakhs from few decades only. Out of total area of Maharashtra, 82% is covered by the basaltic rocks made up of lava. That’s why the quantity of the groundwater is comparatively less than the Indo-gangetic plane.

Groundwater in the north region of the Tapi River is found to be hard, unfit for the human consumption. The residences of district like Buldhana, Jalgaon and Dhule have to use hard water for consumption. Rampant extraction of the groundwater for agriculture might have caused alternation in chemical qualities of the groundwater. It has been also well documented that in Marathwada region, groundwater content higher concentration of fluoride and total Hardness.

Fluorine the most electro-negative element is of great interest and importance to human health because of its curative and harmful effects. Fluorides are released by various natural sources and anthropogenic activities into the aquatic environment (that is surface as well as groundwater). Fluoride can enter the human body through drinking water, food, toothpaste, mouth rinses and other dental products, drugs and fluoride containing salts and hydrofluoric acid. It may cause Fluorosis – a crippling and painful disease such as dental fluorosis, skeletal fluorosis and non-skeletal fluorosis.

Industrial revolution took place in England during the period of 1760-1830. Accordingly, the production prior to demand was introduced. Many countries all over the world adopted industrial policies favouring industrial sector to achieve the fast development of the nation. Government of India also contributed its efforts in the same direction and issued the industrial policy of 1948, 1956, 1977 and so on making several financial and non financial facilities available to have substantial growth and development of industries in particular and nation in general.

Under the name of globalization and making the economy internationally competent, India took a revolutionary decision to follow new industrial policy 1991 opening the doors for investment from foreign countries and private sector even. In addition to this economic reforms have been adopted and advocated for the sake of national development. Three ‘D’ programme consisting of devaluation, decontrol and disinvestment, were also put on the national agenda, to achieve the set targets.

Introduction

Earthquakes are the most destructive among all the natural hazards. Most of the time, they occur without any warning, which makes them most feared and unpredictable natural phenomena. Globally, on an average two earthquakes of magnitude 8 are known to occur every year. Some of the countries like Japan, China and United States have suffered several damaging earthquakes in the past. India has also experienced a number of high intensity earthquakes in the recent past and more than 650 earthquakes of magnitude >5.0 have been reported in India since 1890. Sixty-nine earthquakes in Delaware (U.S.A.) have been documented or suspected since 1871. Refer to Baxter (2000) for more details about the DGS Seismic Network and for documentation of earthquakes. In the 1930s Charles Richter developed a magnitude scale (Richter scale) which was an objective way of discriminating between large and small shocks using the seismic wave amplitude recorded by seismographs (Richter, 1958).

Egg Formation Phenomenon

The chicken egg consists of a very small Reproductive cell or Germinal disc [orBlastoderm;which iscapable of developingintoanEmbryo, iffertilized by a Sperm]. This tiny cell is surrounded by :

• Yolk
= OVARYis responsible for its synthesis.

• Albumen, Shell membranes, Shell and Cuticle
= These are produced in the OVIDUCT.

[A] OVARY

Although there are two ovaries and two oviducts in the hen, but only the left ovary and left oviduct are functional [because, the right ones are atrophied during embryo development]. Before egg production, the ovary is a group of small follicles of different sizes containing ova.

Formation of Yolk

• The yolk is just a source of food material for the small Reproductive cell (Blastoderm).

• Major amounts of yolk material is produced in the liver and transported to ovarythrough blood.

• Two days afterthe formationof First yolk. Second yolkbegins to develop.

• It takes about ten days for a yolk to mature.

INTRODUCTION

Aquaculture had undergone rapid expansion and intensification in the recent past and has taken the shape of a full-fledged diversified industry. But the risk involved in aquaculture activity has also increased significantly due to the outbreak of diseases which has a devastating effect on the aquaculture crops. Fish are aquatic and poikilothermic, their existence and performance are dominated by the quality of their environment . The aquatic environment is a complex system subject to constant physical and chemical changes brought about by natural and manmade processes. Therefore, choosing the proper site to develop aquaculture facility is paramount to its success.

A disease is an abnormal condition of an organism caused by infection, inherent weakness or environmental stress; it prevents the organism from functioning normally which ultimately leads to death (Avault, 1998). In an aquatic environment, there is a profound balancing of relationship between host (fish), pathogen and the environment existing and this is the fundamental concept to disease susceptibility of fish (Snieszko, 1973). A disease organism may be present in the environment or host, but will not cause disease as long as the host has high natural resistant or the physical condition of the host is strong. Once the imbalance is created to any of the component, opportunistic pathogen invades the host resulting to the outbreak of disease.

Abstract

From amongst various geomorphic features the landforms generated by the river systems are significant as these are not only the records of the life histories of the rivers, but also the various dynamic processes and phenomenon operated during their origin like tectonic movements, sea level changes, flood histories, climate changes etc. In this connection a study has been conducted using the satellite borne multi spectral remote sensing data in mapping the flood plains, particularly their anomalies like symmetrical, asymmetrical, multilevel, offset and meander scrolled flood plains of some selected rivers from Asia viz: Tamirabharani, Cauvery and Brahmaputra from India, Indus river from Pakisthan and Tineg river from Phillipines. The paper discusses about these and their significance in unfurling the ongoing tectonic movements, sea level changes, palaeo – ongoing strom surge / tidal activities, ongoing earth tremors etc.

Introduction

The Rivers are not simply the carriers of water from the mountain ranges to the plains and to the oceans. But they have well defined and characteristic life histories of their own, with youthful stage in the mountains, mature stage in the plains and the old stage in the coastal regions [6] and the life histories of the rivers are often compared with man’s life. Infact, once the rivers are born on the surface of the Earth, their only aim is to attain the Mean Sea Level (MSL) or the base level of erosion as early as possible and as short as possible. So, in the mountains, which are normally their regions of origin, since the rivers occur thousands of meters above the MSL, flow vibrantly taking advantage of the slope as short and straight drainages to cut deeply the terrain so as to attain the MSL easily. Since such vibrant activities of the rivers, appear to be similar to the human youths, the rivers are said to be in youthful stage in the mountain regions and the erosion is the only dominant activity. But, on climbing down the hills and reaching the plains, as they still occur at hundreds of meters above the MSL, continue to flow towards the sea but with meandering, sinuous and oscillatory paths as they have lost their elevations when compared to the mountains and in this process of meandering perform both erosion and deposition. As such stabilized flow or “Watch and walk phase” of the rivers in the plains resembles the matured behavior of the middle aged Men, it is called as mature stage of the rivers. In contrast, when the rivers reach the coastal zones as they have attained the MSL, they don’t have any energy to carry even their own load and hence dump all the sediments as deltas, oscillate here and there and finally somehow reach the sea. Such Brownian movement of the rivers as replicates the activities of the old Men, called as the old stage of the rivers. Thus the erosion, both erosion and deposition and only the deposition are respectively the activities of the rivers in these three stages, accordingly the respective and contrasting landforms are formed in these three different stages of the rivers.

Abstract

The time-transgressive changes in the landscape architecture of the Rameswaram island located in the semiarid tract of southeastern India, was animated using ARC/INFO GIS. The animation has shown that the Rameswaram island has evolved through an interplay of tectonic. fluvial, marine and aeolian activities and that the Aeolian activity was accentuated during 1921-1990 A.D

Introduction

The state of Tamil Nadu in the southeastern fringe of India has well evolved riverine ecosystem in the east and a 900 km. long coastal ecosytem in the eastern fringe. From Vedaranniyam in the northeast to Cape Comorin in the southwest these fluvial and coastal ecosystems show evidence of Aeolian activity, especially during the Holocene. Several researches1, 2, 3, 4,5, 6, 7, 8, 9, 10, 11, 12, 13,14, 15, 16, 17, 18, 19 have studied the Quaternary tectonic, fluvial, fluviomarine and marine processes in this part of the semi-arid tract.

Absolute advantage : This is the simplest yardstick of economic performance. If one person, firm or country can produce more of something with the same amount of effort and resources, they have an absolute advantage over other producers. Being the best at something does not mean that doing that thing is the best way to use your scarce economic resources. The question of what to specialise in—and how to maximize the benefits from international trade—is best decided according to comparative advantage. Both absolute and comparative advantage may change significantly over time.

Access to Health Care : 1) The degree to which individuals are inhibited or facilitated in their ability to gain entry to and to receive care and services from the health care system. Factors influencing this ability include geographic, architectural, transportation, and financial considerations, among others. 2) Entry to the health care system is dependent on the wants, resources, and needs that individuals bring to the care-seeking process. Ability to obtain wanted or needed services may be influenced by many factors, including travel distance, waiting time, available financial resources, and availability of a regular source of care.

Acquisition cost : The purchase cost of a drug to an agency, person or institution.

Adaptive expectations : A theory of how people form their views about the future that assumes they do so using past trends and the errors in their own earlier predictions. Contrast with rational expectations.

Backwardation : When a commodity is valued more highly in a spot market (that is, when it is for delivery today) than in a futures market (for delivery at some point in the future). Normally, interest costs mean that futures prices are higher than spot prices, unless the markets expect the price of the commodity to fall over time, perhaps because there is a temporary bottleneck in supply.

Balance of payments : The total of all the money coming into a country from abroad less all of the money going out of the country during the same period. This is usually broken down into the current account and the capital account. The current account includes : *visible trade (known as merchandise trade in the United States), which is the value of exports and imports of physical goods; *invisible trade, which is receipts and payments for services, such as banking or advertising, and other intangible goods, such as copyrights, as well as cross-border dividend and interest payments; *private transfers, such as money sent home by expatriate workers; official transfers, such as international aid. The capital account includes : *long-term capital flows, such as money invested in foreign firms, and profits made by selling those investments and bringing the money home; *short-term capital flows, such as money invested in foreign currencies by international speculators, and funds moved around the world for business purposes by multinational companies. These short-term flows can lead to sharp movements in exchange rates, which bear little relation to what currencies should be worth judging by fundamental measures of value such as purchasing power parity. As bills must be paid, ultimately a country’s accounts must balance (although because real life is never that neat a balancing item is usually inserted to cover up the inconsistencies).

Balanced budget : When total public-sector spending equals total government income during the same period from taxes and charges for public services. Politicians in some countries, such as the United States, have argued that government should be required to run a balanced budget in order to have sound public finances. However, there is no economic reason why public borrowing need necessarily be bad. For instance, if the debt is used to invest in things that will increase the growth rate of the economy—infrastructure, say, or education—it may be justified. It may also make more economic sense to try to balance the budget on average over an entire economic cycle, with public-sector deficits boosting the economy during recession and surpluses stopping it overheating during booms, than to balance it every year.

Hard currency : Money you can trust. A hard currency is expected to retain its value, or even benefit from appreciation, against softer currencies. This makes it a popular choice for people involved in international transactions. The dollar, d-mark, sterling and the Swiss franc each became a hard currency, if only some of the time, during the 20th century.

Hawala : An ancient system of moving money based on trust. It predates western bank practices. Although it is now more associated with the Middle East, a version of hawala existed in China in the second half of the Tang dynasty (618-907), known as fei qian, or flying money. In hawala, no money moves physically between locations; nowadays it is transferred by means of a telephone call or fax between dealers in different countries. No legal contracts are involved, and recipients are given only a code number or simple token, such as a low-value banknote torn in half, to prove that money is due. Over time, transactions in opposite directions cancel each other out, so physical movement is minimised. Trust is the only capital that the dealers have. With it, the users of hawala have a worldwide money-transmission service that is cheap, fast and free of bureaucracy. From a government’s point of view, however, informal money networks are threatening, since they lie outside official channels that are regulated and taxed. They fear they are used by criminals, including terrorists. Although this is probably true, by far the main users of hawala networks are overseas workers, who do not trust official money transfer methods or cannot afford them, remitting earnings to their families.