eChapters

Curriculum reorientation is necessary, when any one in use is no longer responsive to the needs, interests and unable to meet the demands of the farming community to which it is intended to serve. In any case a number of factors, such as those listed below, must be taken into consideration while reorientation:

There should be an analytical assessment of the existing agricultural extension curriculum in order to justify any proposed reorientation.

Learning needs of the farm university graduates and farmers should be reviewed from the point of view of both individual learner requirements and national development needs.

“Curriculum” is seen often as a critical issue during discussions on quality of agricultural education, being considered variously as content, as product and as process. It is easy to make the assumption that a common understanding of curriculum, but in practice this is far from the case, with a host of definitions, approaches and ideological standpoints. Even though a dialogue on curriculum theory is well established, there is still a strong tendency in practice to understand curriculum as a list of content, often developed in considerable detail, that students should be taught.

Participatory curriculum development (PCD) in extension education is an emerging approach to help and improve the quality of education in farm universities. The main steps of the PCD approach adopted here have high practical utility for the design of formal course contents for the Undergraduate and Postgraduate courses in Agricultural Extension. A great deal of thinking is required while deciding on how much participation will be required from which stakeholders, at what level(s).

Introduction

The minimum dissolved oxygen (DO) level that fish can safely tolerate depends upon temperature and to a certain extent the species. Volubility of oxygen increases as temperature decreases. In ponds, DO can change dramatically over a 24-hour period. During the day oxygen is produced by photosynthesis, the process by which green plants convert water and carbon dioxide in the presence of light, to oxygen and carbohydrates. During the night and day oxygen is consumed by respiration, the process by which plants and animals use oxygen to produce carbon dioxide as they burn carbohydrates, but in the day photosynthesis usually produces more oxygen than is used.

Introduction

Technical innovation is a process by which new or improved technologies are developed and brought to widespread use (Ambuj Sagar, 2013). Technical innovations are interlinked by research, development, demonstration and deployment which involves a range of organizations and personals with institutional arrangements underpinning the growth and advancement of different kinds of technologies. In the area of water productivity, technical innovations has helped expand water supplies through improved exploration and recovery techniques, increased water use efficiency, improved water availability and reduced environmental impact of water and its usage.

Background

Analysing changes in the cropping patterns is an important prerequisite for optimization and evaluation of water use efficiency and water resource management. Cropping pattern changes in India could not only be seen as resulting from the pursuit for higher economic returns, but also as a feedback response to limited water resources. Although a systematic framework is still needed for future cropping pattern planning in the country by taking food security, continued agricultural expansion and other constraints into consideration, the existing cropping pattern may provide an insight with which alternative cropping patter may be proposed for a right intervention in enhancing water productivity and food security.

About the Lower Bhavani Project

The Lower Bhavani Project (LBP) is located in Tamil Nadu in Bhavani River, irrigates 83980 ha in two seasons in a year. The canal water supply is provided for one wet crop from August to December (41885 ha) and one dry crop from January to April (41885 ha). The cultivated area under LBP in Erode and Coimbatore districts are irrigated lands with canals and groundwater, and rainfed crop lands (with supplemental groundwater irrigation).

About 60 per cent of total arable land (142 million ha) in India is rain-fed, characterized by low productivity, low income, low employment with high incidence of poverty and a bulk of fragile and marginal land. Watershed development program is, therefore, considered as an effective tool for addressing many of these problems and recognized as a potential engine for agricultural growth and development in fragile and marginal rain-fed areas. The Government of India has accorded high priority to the holistic and sustainable development of rain-fed areas through the integrated watershed development program since the 7th Five Year Plan (1985-90) and since then a number of watershed programs have been specifically launched in the rain-fed areas with the sole objective to improve the livelihood of poor rural households in a sustainable manner.

Background and Technology Intervention

Managed Aquifer Recharge (MAR) describes planned storage and treatment of water in aquifers which can provide cheapest form of new safe water supply for towns and small communities (British Geological Survey, 2006). It is a part of a groundwater manager’s tool which is useful for replenishing and re-pressurising depleted aquifers, controlling saline intrusion or land subsidence as well as improving water quality through filtration and chemical and biological processes. MAR can enhance volumes of groundwater abstracted through different package of measures and restore groundwater balance. It also plays a vital role in smoothing out supply and demand fluctuations, stabilizing over-exploited groundwater levels, reducing evaporation losses and runoff, maintaining environmental flows in streams and rivers, improving water quality and augmenting the reuse of waste and storm water. In recent times, MAR uptake has been very limited.

Background and Technology Intervention

Tanks are one of the oldest structures in India that has been serving as an important water harvesting device since time immemorial. The total number of irrigation tanks in India is estimated to be around 2, 08,000 of which, three states in South India viz., Andhra Pradesh, Tamil Nadu and Karnataka accounts for nearly 1, 27,000 tanks irrigating 1.8 million hectares of land (Gandhiraj, 2009, Siva Subramanian, 2006, Sakthivadivel et al. 2004, Vaidhyanathan, 2001). In Tamil Nadu for instance, there are more than 39,000 tanks at present many of which were constructed during 18th and 19th centuries by kings, zamindars and Britishers (Jagadeesan, M 2011; Palanisami and Easter 2000: 9). Similarly in Telangana region of Andhra Pradesh, tank irrigation developed extensively since ancient times. The district of Warangal and Karim Nagar have several old irrigation tank structures.

Background and Technology Intervention

Andhra Pradesh is India’s fourth largest state in terms of area and fifth in terms of population. Its capital Hyderabad is one of the largest and fastest growing cities in Southern India occupying 650 square kilometers along the bank of Musi River. History says that, the fifth sultan, Muhammad Quli Qutab Shah established Hyderabad on the banks of Musi River in 1591 to avoid the acute water shortages experienced at Golconda during his rule. Today, due to rapid urbanization and increased economic activities, the river has become a receptacle of untreated domestic and industrial waste dumping out of Hyderabad. It is estimated that nearly 350 MLD (Million Liters a Day) of polluted water and sewage originating from the twin cities of Hyderabad and Secunderabad flow into the river. Though this river water which is at the downstream of the city remains highly polluted and considered a major disaster in Hyderabad, it is a significant resource for semi-arid and peri-urban population where the cultivation of fodder grass, paddy and vegetables have contributed largely to the household food security.

Background and Technology intervention

Instead of open channel irrigation, intervention of PVC pipeline system using gravitational hydraulic pressure can convey efficient water without the use of power. This will reduce conveyance loss and improve timely and equitable distribution of water to all farmers. As large number of open wells with pump sets are available, uninterrupted power supply is not available for on time irrigation during summer seasons. During such times, savings from tank water will be more helpful allowing the farmer to manage groundwater greatly.

Background and Technology Intervention

To increase the water use efficiency coupling piped network and micro irrigation, Department of Agricultural Engineering along with the Tamil Nadu Government introduced a project on “Water conveyance works of modernization of on-farm irrigation network in 5(R) and 7(R) sluices Parambikulam Aliyar Project (PAP)” covering a total area of 109.86 acres in both the sluices.

Significance of this project is to improve the water use efficiency in canal command areas where the farmers were unable to cultivate annual / long term crop due to alternate supply of water in each zone. PAP command area has 4 zones and each zone receives water once in 135 days in a 2 year span through open channel leading farmers to adopt flood irrigation.

Background and Technology Intervention

The primary resource affected by the climate change is water. In arid and semi-arid regions of India, any shortfall in water supply due to climate change will enhance competition for water use for a wide range of economic, social and environmental applications. The population growth with the improved living conditions also increases the demand for food production and thereby increasing the demand of water in multiple folds in the river basins (UNESCO-WWAP, 2009). The major portion of water available in the Indian River basins are used for cultivating rice and thus poses major challenges to water management, especially during unfavourable climatic conditions.

Background and Technology Intervention

Owing to the subsequent monsoon failures and unavailability of water for irrigation, Tamil Nadu farmers have switched over to drip irrigation which is not only saving huge quantity of water for them, but also preventing irrigation run off and providing deep water percolation. In Tamil Nadu, usage of drip irrigation is prevalent among vegetable and fruit growers and organic farmers.

To relieve the plants from stress or strain of water logging and water scarcity, Tamil Nadu Horticulture Development Agency has played a key role by rightly intervening the farmers through drip irrigation technology and thereby improving water use efficiency.

Introduction

Though the potential benefits generated by the drip irrigation method are apparent, the adoption of drip irrigation is yet to be widely promoted across different regions and states in India. Several factors such as huge initial investment, small size of holding, lack of technical support, nature of cropping pattern, access to water and socio-economic conditions of farmers etc. (Namara et al, 2005, Suresh Kumar, 2012) are constraining adoption of drip irrigation. In some cases, even after the adoption of drip irrigation, the farmers, particularly, the small farmers have often discontinued use of drip irrigation for several reasons such as due to lack of maintenance, irrelevant cultural background, and unreliable water supply (Kulecho and Weatherhead, 2005).

Introduction

Recognizing the importance and impact initiatives were taken for starting National Horticulture Mission, announced by Honorable Prime Minister on 15 August 2003. Crop diversification has become an imperative for India’s agri-economy. To address this need and to give further impetus to encouraging growth in cultivation of horticultures, vegetables, flowers, species etc. a National Horticultural Mission has been launched. Its main target will be doubling India;s horticultural production by 2010. Sub sequentially, National Horticuture Mission was launched during Tenth Plan with effect from 2005 2006 for holistic development of horticultural crops, having competitive advantages.

Introduction

Wheat, a vital cereal crop cultivated globally, serves as a fundamental source of sustenance and livelihood for millions (FAOSTAT, 2021). However, wheat production faces hindrances from various biotic and abiotic stresses, with heat stress being a notable challenge (Prasad et al., 2019). The term “terminal heat stress” refers to the elevated temperatures occurring during the crucial reproductive phase of wheat, encompassing the grain-filling period and flowering stages (Lobell et al., 2012). Terminal heat stress emerges as a significant impediment to wheat cultivation, particularly in arid and semi arid regions, manifesting during the reproductive stage of the crop (Wassmann et al., 2009). This predicament is exacerbated by the escalating frequency and intensity of heat waves attributable to climate change (IPCC, 2021).

Introduction

Currently, the agricultural industry is expanding exponentially. Improved economic growth and rapid population growth have spurred investor interest in the agricultural industry. The World Bank estimates it to be worth $3 trillion. With the urbanization and industrialization of the agricultural sector, the amount of waste generated has also increased, causing many environmental problems. About 5 million metric tons of biomass are produced annually from agriculture. These agricultural wastes become breeding grounds for pathogenic microorganisms if not properly treated and recycled, it is noteworthy that this agricultural waste can be used as substrates for the synthesis of valuable product or as raw material for renewable energy production.

Introduction

Non-coding RNAs (ncRNAs) are RNA molecules that do not code for proteins. They are transcribed from DNA and can be categorized into two main types: long non-coding RNAs (lncRNAs) and small non-coding RNAs (sncRNAs). While sncRNAs are shorter than 200 nucleotides, lncRNAs are usually longer than 200 nucleotides. Non-coding RNAs have been found to play important roles in a variety of cellular processes, including gene expression, cell differentiation, and development.

Introduction

The term "nano" is used to define one that has a size in the nanometer range. Nanotechnology is an interdisciplinary field of medicine, chemistry, physics, and biology that has emerged during the past few decades as a potential area of study. The goal of this interdisciplinary technology is to transform molecules into entities, then do the opposite. Nanobiotechnology is the term for the fusion of nanotechnology with biotechnology. In nanobiotechnology nanoscale principles and techniques are used to explore biosystems and generate novel biomaterials. Biosensing, cell labelling, and molecular imaging can all gain benefit from nanostructure materials in life science, health and biomedicine.

Introduction

Nanocomposites are materials that incorporate nanosized particles into a standard material matrix. The addition of nanoparticles can significantly improve properties such as mechanical strength, toughness, electrical or thermal conductivity. Typically, only a small amount of material (0.5-5% by weight) is required due to the effectiveness of the nanoparticles. A nanocomposite is a solid material that consists of multiple phases, where at least one of the phases has one, two, or three dimensions in the nanometer size range. The goal of the nanoscale phase process is to achieve synergy between different constituents. Nanocomposites represent a promising alternative to overcome current limitations of microcomposites and monolithics, and are becoming the materials of the future (Schmidt et al., 2002).

Introduction

However, most of the crops get damaged by pest infestation, microbial attacks, and insufficient nutrient availability. Currently, the primary goal of world’s agriculture is to fulfil the nutritional demand of the rapidly growing population. Nanotechnology tries to fill the gaps in agriculture to become more resilient, while making sure there is enough food for everyone. As a result, nanoparticles are evolving into a cutting-edge material that will change how contemporary agriculture is done. The use of nanotechnology in agriculture encompasses the creation of novel materials, devices, and systems at the nanoscale to enhance the efficiency, productivity, and sustainability of agriculture. This technology has the potential to bring a revolutionary change to the field of agriculture by offering innovative solutions to various agricultural problems.

Cowpathy

Panchgavya chikitsa is an age old system of medicine described in ancient Indian literature ‘Ayurveda’ and now it is known as ‘cowpathy’ means the therapy of human ailments through cow products. However, Cowpathy is different from Panchgavya as it also include cow cuddling, Backrub, Gau grass, Gauseva, and living with cow besides, Panchgavya products milk, curd, ghee, urine and dung. Since the cowpathy practice is to increase the aura of an individual, it prevents from many ailments and infections. In Ayurvedic system, the medicines are prepared either from plants or from animals besides the use of certain metals. The Ayurvedic medicines of animal origin are mainly prepared from indigenous cow products such as urine, dung, milk, curd and ghee. Medicinal use of cow urine has been in practice since time immemorial in India.

Introduction

Nanoparticles are minute particles with at least one dimension that measures less than 100 nanometers. They have been extensively studied in various f ields including medicine, biology, chemistry, physics, engineering, and environmental science. Nanoparticles have several unique properties, such as a high surface area to volume ratio, enhanced reactivity, and optical, electrical, and magnetic properties that differ from the bulk material. These properties make nanoparticles suitable for a variety of biomedical applications, including diagnosis, imaging, drug delivery, and therapy. This chapter will discuss the current and potential applications of nanoparticles in healthcare and research.

History

Pauling and his colleagues coined the phrase "molecular disease" in 1949, based on their finding that a single amino acid shift in the β-globin chain causes sickle cell anemia, which is characterized primarily by repeated bouts of acute pain due to vessel occlusion. In theory, their discoveries laid the groundwork for molecular diagnoses, though the major breakthrough came many years later. At the time, when molecular biology was only rapidly growing, providing molecular diagnostic services was unthinkable and practically impossible. In the early days of recombinant DNA technology, many scientists from different f ields collaborated to provide the first seedlings of molecular diagnostics.

The evolution process took millions of years to develop human and animals on the top of the hierarchy. It has moved forward due to ability to survive the various deadly diseases as for the survival of any leaving creature, it have to overcome the threat posed by the pathogens surviving in its environment and most of the time in its close vicinity. These microbes are smarter than us and are the best example of the survival of the fittest. To overcome these, nature has provided defense system to all leaving creatures that neutralize the invasion of pathogens or undesired microbes. The concept is based on the detection of self and nonself molecules.

Introduction

As per the reports of the United Nations Organization (UNO), the world population is expected to increase to about 9.7 billion by 2050 and to 10.4 billion by the mid-2080s. The increasing population will result in food scarcity and hunger across the world. To meet the demand for food to feed the people and meet the present aim of WHO of “Zero Hunger by 2030”, agriculture and livestock production needs to be increased. However, according to the ICAR Vision 2050 document, growth of the livestock sector is expected to be higher than the agriculture due to different factors like urbanization and changing food habits among the population residing in the urban area, lack of technology among the small and marginal farmers, reducing operational land, water scarcity, reduced irrigation infrastructure, climate change, etc. to name a few. But to achieve food security through the livestock sector, animal health and production of the animals need to be addressed.

Aim: Study of 3 point and 4-point starter.

Theory

A 3-point starter in simple words is a device that helps in the starting and running of a shunt field or compound excited dc motor. Now the question is why these types of dc motors requires the assistance of the starter in the f irst case. The only explanation to that is given by the presence of back emf Eb , which plays a critical role in governing the operation of the motor. The back emf, develops as the motor armature starts to rotate in presence of the magnetic field, by generating action and counters the supply voltage. This also essentially means that the back emf at the starting is zero, and develops gradually as the motor gathers speed.

Aim: To study the effect of variation of field current upon the stator current and power factor with synchronous motor running at no-load, hence to draw V and inverted V curves of the motor.

With constant mechanical load on the synchronous motor, the variation of field current changes the armature current drawn by the motor and also its operating power factor. As such, the behavior of the synchronous motor is described below under three different modes of field excitation.

Aim

(a) Perform load test on 3-phase induction motor.

(b) Compute Torque, Output power, Input power, Efficiency, Input power factor and Slip for every load setting and to determine how speed, efficiency, power factor, stator current torque, and slip of an induction motor vary with load.

The load test on induction motor is performed to compute its complete performance i.e. torque, slip, efficiency, power factor etc. During this test, the motor is operated at rated voltage and frequency and normally loaded mechanically by brake and pulley arrangement from the observed data, the performance can be calculated, following the steps given below.

Aim: Perform an experiment to determine the parameters of a three-phase induction machine.

As the circuit modal of an induction motor is similar to that of a transformer, the parameter of the modal can be obtained by no-load test and blocked rotor test.

No-load test

In this test, the motor is to run at no-load at rated voltage and frequency. The applied voltage and current and power input is measured. Power input at no load (Po ) provides only the losses that are rotational losses.

Aim: Determination the equivalent circuit parameters of a single-phase induction motor.

1. No-load test.

2. Blocked rotor test.

The performance of a single-phase induction motor is generally studied either by double revolving field theory or by cross field theory, the former being simple and gives a clear physical understanding.

Aim: To determine the Efficiency Vs Load characteristics (External characteristics) of D.C. shunt motor Swinburne’s method.

This method is an indirect method of testing a DC machine. It is named after Sir James Swinburne. Swinburne’s test is the most commonly used and simplest method of testing of shunt and compound wound DC machines which have constant flux. In this test the efficiency of the machine at any load is pre-determined. We can run the machine as a motor or as a generator. The iron and friction losses are determined by measuring the input to the DC machine at no-load. The machine is to be run as a motor at normal voltage and speed. The Swinburne’s method includes all the losses in the field circuit and winding which do not occur actually in the machine but the error introduced due to this is quite insignificant and still shows the accurate results. In this method of testing no-load losses are measured separately and eventually we can determine the efficiency.

Aim: To perform speed control of D.C. shunt motor by

1. Armature resistance control method.

2. Field (flux) control method.

This method is based on the fact that by varying the voltage available across the armature, the back EMF and hence the speed of the motor can be changed. This is done by inserting a variable resistance RC (known as controller resistance) in series with the armature as shown in Fig. (a).

Aim: To determine the Load characteristics (External characteristics) of self excited D.C. shunt generator.

If a dc shunt generator, after building up to its voltage, were loaded, its terminal voltage will drop. This drop increases if load increases. But this type of terminal drop is undesirable for a specified service. The relation between terminal voltage and load current is called external characteristics. Speed is to be kept constant. Reason for voltage drop:

Aim: To obtain balanced two-phase supply from three-phase supply by Scott arrangement of two single-phase transformers.

The phase conversion from three to two phase is needed in special cases, such as in supplying 2-phase electric arc furnaces. Scott connection of two-single phase transformers is employed for conversion of a three-phase system to two phase system or vice-versa. Rating of one transformer should be 15% greater than that of the other, but in practical two identical transformers are used for interchangeability and spares. The 50% tap of one transformer (Main transformer) is connected to 86.6% tap of the other transformer (Teaser transformer). The secondaries for balanced supply system have equal number of turns.

Aim: To verify the relationship between the input and output voltage for 3-phase transformer connection in various ways:

A 3-phase transformer can be considered as a set of 3 single-phase transformer bank or as single unit of 3 phase windings. Since three winding are available in both primary and secondary side then there can be different types of connections and so far, different characteristics.

Aim: Perform the parallel operation of single-phase transformer and observe the load sharing of each transformer.

A power transformer is one of the most vital and an equally expensive component in a power system. It may so happen that, over time, due to load growth in its service area, an existing transformer may not be able to withstand the demand during peak-hours without exceeding its long-term MVA rating. Operating a transformer in such a fashion would cause overheating and degrade its expected life. In most cases, instead of commissioning an entirely new higher capacity unit, a more viable alternative exists in adding a smaller unit in parallel to complement the existing one. In other words, a new smaller capacity transformer can now be connected in parallel to the existing one such that the two shares a large peak load in a specific proportion and the one operating near limits is relieved of the burden.

Aim: To perform Sumpner’s test (back-to-back test) on a pair of similar transformer and thus calculating efficiency of operation.

Sumpner’s test givens an effective way, to actually see the performance of transformers of large rating without loading them, at full load. This back to back test allows heat run test so that temperature rise and its rate can be analysed.

The two identical transformers are connected back to back as shown in figure such that their polarities are in opposition. To do this, two terminals of the secondary winding are connected as shown and the voltages between the other two are measured by exciting primaries.

Aim: Determination of percentage regulation and efficiency of a single phase transformer by direct loading method.

Percentage regulation

When the load on the transformer is increased, the voltage drop in its primary and secondary windings also increases causing variations in secondary terminal voltage. The term voltage regulation of transformer means the change in secondary terminal voltage when full load is thrown off keeping supply voltage and frequency constant. It is generally expressed as percentage of no load terminal voltage for a desired power factor.

Aim: To perform open and short circuit test on a single-phase transformer, to obtain equivalent circuit parameters.

Open circuit test

The core loss or iron loss i.e. the no-load loss in a transformer is determined by performing the no-load test at normal sine wave impressed voltage. Through the iron loss in a transformer is not governed by the supply being connected to primary or secondary side but when measuring this no-load loss.

It is usually more convenient and safer to supply the voltage to the low voltage side. This makes the test apparatus cheaper and becomes safer for the low testing personal. To determine the shunt branch parameter of the equivalent circuit, the primary side (L.V.) is connected to a normal supply voltage and rated frequency and secondary side (H.V.) is left open with care so that there is no possibility of coming in contact with any part of (H.V.) terminals. The wattmeter connected in the primary (L.V.), will then read the total hysteresis.

Introduction

We, the participants of ITAF 2023 along with Dr. B. R. Chavan and Dr. Prashant Bodake visited Farm Song Nam under the guidance of Asst. Prof. Dr. Naphat Panthukumbol and Dr. Sorawit Powtongsookon 18/10/23 at 01:00 pm. This research station is under NSTDA (National Science and Technology Development Agency). The purpose of the visit was to learn about the latest developments in aquaculture technologies.

Dr. Sorawit explains that this system is able to monitor water quality, floc sedimentation, the current age of shrimp, quantity in the pond, total weight, density, size, total amount of water used, pond volume, and volume of water in the pond at a time. This system is equipped with cloud backup that can store all recorded pieces of information. After monitoring, the available information is automatically uploaded to the cloud and accessible through mobile by simply visiting the website. The key feature of Aqua-IoT is the integration of key data– physical, chemical, and biological water qualities and weather – into one single dashboard that enables users to understand the relationship between the data, analyze the data, and make informed decisions.

Introduction

We, the participants of ITAF2023 with Dr. B. R. Chavan and Dr. Prashant Bodake, visited Boonsawang Co. under the guidance of Asst. Prof. Dr. Naphat Panthukumbol and Mr. Suthi Mahalao on 18/10/2023 at 09:00 am. Boonsawang Co. in Chonburi, owned by Suthi Mahalao, also exports fry to Vietnam, Malaysia, Singapore, Taiwan, Australia, and Israel. In addition, Suthi runs his sea bass farm and is a feed distributor to farms in the province. The purpose of the visit was to learn about the seabass culture system and get familiar with technical aspects. The farm occupies an area of 10 hectares and is covered in 11 ponds. The farm is aimed to grow from fry to marketable size seabass. The single crop duration is divided into 4 periods.

We, the participants of ITAF2023 visited The ocean farm under the guidance of Asst.Prof.Dr.Naphat Panthukumbol and Dr.Somrat Taweedet on 17/10/23 at 3:00 pm. The farm is certified by fisheries department and is located in Chonburi Province. The purpose of visit was to learn about the nursery rearing of shrimp and use of frozen artemia.

1) Nursery rearing details

The cultured species was Litopenaeus vannamei. Rearing was done from nauplii to PL15 stage. The farm is producing 2 variants named- ‘The ocean hero’ which is disease resistant and ‘The ocean speedy’ having high growth rate. They are procuring nauplii from Phuket. Then double certification from DOF and Burapha university lab is done to ensure SPF stock. The purchasing price of nauplii is 12,000 baht/ million nauplii and transportation done by plane. The culture period of shrimp is around 21 days.

On 17 October we visited the Institute of Marine Science, Burapha University (BIMS), THAILAND at 9 a.m. The institute is situated in Bangsean. BIMS is a marine research institute of Burapha University. They have 6 organizations: Marine Research Department, Marine Aquarium Department, Marine Museum Department, Academic Service Department, Office of the Director and Research Station.

They have shown us their Life Support System of Public Aquarium and coral propagation and conservation.

1) Public aquarium

We have seen the Life Support System of Public Aquarium i.e. Filtration System, which involves the complex systems and technologies used to maintain the health and well-being of marine life in public aquariums. This is crucial for keeping the animals and ecosystems on display healthy and sustainable. The display tank has having 10,00,000-liter capacity.

We, the participants of ITAF2023 visited Sriracha fisheries research station under the guidance of Asst. Prof. Dr. Naphat Panthukumbol and Dr. Somrat Taweedet on 16/10/23 at 08:00am. The research station is under faculty of fisheries, Kasetsart university in Chonburi Province. The purpose of visit was to learn about the mussel aquaculture and Integrated Multi- Trophic Aquaculture (IMTA).

1) Mussel aquaculture

Cultured species was Perna viridis( Green mussel ). Almost all rafts were owned by fishermen and 10 rafts were under the management of sriracha fisheries research station. The cost of production was 100 baht /acre. Simple method of culture is practiced by installing rafts before breeding season and allowing the natural spawn to attach. The harvesting size of mussel is 8 cm. Observed growth rate is 1cm/ month. Other maintenance includes repairing of ropes ,buoys etc. during off-season. Farmers face many constraints like plankton bloom, waste water discharge, predation by sting ray,parasitism during summer months.

Frog farming in Thailand started 20 years ago. The frogs commonly found and farmed in Thailand are the local species, Rana tigerina and Rana rugulosa. The first imported bullfrog, Rana catesbeiana was introduced in 1980 and is popular in the northern part of the country. Rana tigerina is olive brown in colour which is about 15cm long when fully grown. The adult weighs about 300g. Rana rugulosa is another local species that is olive-brown in colour with a dark head. It is about 13cm long when fully grown and weighs about 270g. The imported species, Rana catesbeiana is olive-brown to green in colour. It is 17 cm long when fully grown and weighs around 459g.

On the morning of 13 Oct 2023 morning (9:30 am - 12:00 pm), ITAF participants visited snake-skin gourami local farms in Samut scorn province. Snake-skin gourami is one of the best delicacies in Thailand which has large demand in local and international markets. Snake-skin gourami can breed after reaching 100-200 gms ( 2 months). The culture period of snake- skin gourami is 9-10 months. In snake- skin gourami males have a large body and long dorsal fin than females.

Farm 1

Snake-skin gourami culture is done in 30 rai ( 1 rai= 1600 m2) area of the farm. The depth of the pond is 1.5m. A single crop is taken in one year. 50,000 no. of fry are stocked in 30 rai area. Feeding areas are constructed by the net embankment where feed is given to fish harvesting is done after 8-9 months. The cost of production for one crop is 2 million/year in that they produce 30-40 tonnes /30 rai, which is almost 3 million / year.

We visited the CPF (Thailand Public Company limited) in Samutsakorn on 12/ 10/23 at 1:30 pm. The purpose of the visit was to know about the feed ingredients and production process.

1) Overview

Product like shrimp feed and fish feed are prepared by the company. Company was spread in 61 Rai( 24 acre) area. 400 employees are working in the company.Working hours is 3 shift / day and working days – 6 days / week.Shrimp feed unit have the capacity of 13,000 T/M and actual production was 7000 T/M. 8 line pellet machine was used for this purpose. Fish and frog feed unit have capacity of 11,000 T/M and actual production 7000 T/M. 6 line extruder machine was used.