eChapters

Introduction

Increasing carbon content in the soil, through better management practices, produce a number of benefits in terms of soil biodiversity, soil fertility and soil water storage capacity and hence productivity. Soil carbon sequestration through the restoration of soil organic matter can further reverse land degradation and restore soil “health” through restoring soil biota and the array of associated ecological processes. In particular, through improved soil water storage and nutrient cycling, land use practices that sequester carbon will also contribute to stabilizing or enhancing food production and optimizing the use of synthetic fertilizer inputs, thereby reducing emissions of nitrous oxides from agricultural land. Conservation tillage practices also reduce significantly the use of fuel and hence gaseous emissions. Soil carbon sequestration is thus very cost effective and could take effect very quickly (FAO, 2008). It also constitutes a valuable win-win approach combining mitigation (CO₂ is removed from the atmosphere) and adaptation, through both increased agro-ecosystem resilience to climate variability and more reliable and better yields (production and income generation). Under climate change scenarios, increased temperature may enhance soil organic matter mineralization in colder regions of the world, releasing carbon dioxide from soils (FAO, 2008). Improved soil management will mitigate the effects of global warming by improved and permanent soil cover. Soil carbon storage was hitherto left out of international negotiations because of envisaged difficulties of validation of amounts and duration/permanency of sequestration. 

Soil microorganisms are believed to play a major regulatory role in organic carbon dynamics, as key architects in nutrient transformation, and physical engineering of soil structure. The microbial populations of the soil alone encompass an enormous diversity of bacteria, algae, fungi, protozoa, and actinomycetes. Microbial diversity is being regulated by substrate and water availability, temperature, climatic regime and soil structure, which is considered as a transformation agent for soil organic matter and a labile pool of organic and inorganic nutrients. Extensive cultivation with repeated tillage operation often disrupts soil aggregates stability and destroys aggregates carbon and therefore, soil lose their physical properties and nutrient supplying capacity in a long-run.

Abstract

The utilization pattern of common property water resources revealed interesting pictures in different agro climatic regions of the eastern region. The group activities for utilization of water resources in Keonjhar district of Orissa indicate that the 10 different groups of farmers have been benefited differently from the utilization of common property water resources. The group nearer to sources utilized water resources intensely to their maximum benefit. The study reveals the different benefit level for different user groups under WTCER developed water resource. It is revealed that the use of CPR revealed a highest benefit cost ratio of 3.88 against lowest benefit cost of 1.24 for different groups. A case study of use of CPR water resources under irrigation tanks for different economic activities carried out by WTCER in Ganjam, Gajapati of Orissa and South 24 Praganas of West Bengal reveals that, the relatively poor HH (having land holding <1 ha) constituting about 76% of the population under the command of the sources completely depended on the system for livelihoods and for agricultural purpose in comparison to 54% of the households having land holding more than 1 ha. In most of the systems of irrigation tanks, the dependency on common property tanks for livestock rearing was found out to be more than 90% which sometimes goes as high as 100% for poor households.

Abstract

Nadia district covers 3927 sq km of West Bengal State and forms lower part of Indo-Gangetic alluvium of Quaternary age. The district is entirely affected by arsenic contamination in ground water. Population explosion, rapid agricultural growth and inadequate surface water resources has put tremendous thrust on ground water development. 80% of the population is dependent on agriculture. Ground water plays a key role to yield substantial agricultural growth. Irrigational potential of the district is 3356 sq km, of which major contribution belongs to ground water only, i.e., 3100 sq km. Summer season (boro) (lean period crop) paddy cultivation demands huge ground water. Shallow tube wells within 80 metre depth are major in numbers than deep (beyond 100 metre) tube wells. Dynamic ground water resource calculation indicates that net ground water available in the area is 198948 ham, of that for irrigation purposes ground water draft is 167617 ham. Net ground water available for future irrigation development is 34996 ham. Out of 17 blocks of the district, six blocks have already been listed under semi-critical category. 

Abstract

The bio-drainage system used to control the water logging hazards and restore the ground water table depth at a level favourable for other crops to grow. The water utilization efficiency per unit area of land improved through bio-drainage and associated cropping activities. The huge quantity of shallow and good quality groundwater that remains perpetually unutilized by the prevalent lowland cultivation system was effectively used by the biological drainage system. Thus the bio-drainage is expected to alleviate the land degradation problem due to high depth of water stagnant, to restore the crop cultivation programme on a sustainable way, to improve the water management practices, to improve the economic conditions of the lowland farmers and finally, to conserve the ecological values of this fragile agro-ecosystem.The objectives of efficient bio-drainage system are to evaluate ET and depended on growth characteristics of different trees and vegetation species having bio-drainage potential in the waterlogged land thereby to study the water table behaviour in the land under plantation and in the surrounding region and use the result in developing suitable plantation geometry to ensure desired water table draw-down, to assess interaction between bio-drainage plantation and co-existing crops and/or companion crops, to assess the value of the tree species through fodder, fuel wood and timber use, and to development of a new technology for land reclamation and evaluating its impact on soil, water and plant bodies in the basin.

Abstract

The effect of watershed management programme was studied with introduction of new crop-cultivars including six rainy season crops namely direct seeded rice (drilled rice), transplanted rice, arhar, groundnut, sesamum and maize and two winter season crops namely mustard and wheat. The crop demonstration programme were undertaken for consecutive four years during 1988 to 1991 to utilize different land situations and for effective use of created irrigation potential at a drought prone tract of West Bengal (India). The results of the crop demonstration revealed that with selection of crops and its suitable varieties, adopting improved agronomic practices including scientific management of fertilizers and irrigation water, plant protection measures, the productivity of both land and crops markedly increased. The crop production strategy on the basis of land capability classification changed the land use, cropping pattern and crop intensity in the watershed area.

Abstract
 
Rice fallows are those land which remain uncultivated during rabi after harvesting of kharif paddy. Several reason for not taking second crops such as early withdrawal of monsoon rains leading to soil moisture stress at planting time of rabi crops, water logging and excessive moisture in the months of November and December, lack of appropriate varieties of winter crops for late planting, and socio-economic problems like stray cattle, blue bulls etc. India accounts for 11.65 million ha (79%) of the total rice fallows of South Asia. The rice fallows offer good scope for area expansion of chickpea. The residual soil moisture left in the soil after rice harvest is often sufficient to grow chickpea in low to medium land soil. It is also beneficial for chickpea where short duration paddy grown which vacate fields in September-October. In long duration paddy, chickpea could be grown under Utera cultivation (relay cropping) in the states of Chhattisgarh, Jharkhand, Bihar, West Bengal, Orissa and Assam. Optimum plant population can only be ensuring in well levelled land, sufficient soil moisture and good seed under Paira (Utera) cropping. 

Abstract

Jute is known as golden fibre of Bengal and the most important bast fibre of the world. Jute is a natural fibre crop and is second in the world after cotton in terms of global production, consumption and availability. It is a completely biodegradable, recyclable and eco-friendly lingo-cellulose fibre. The genus Corchorus belongs to the family Tiliaceae, which is composed of approximately 100 species. Two species (Corchorus capsularis L. and Corchorus olitorius L.) are widely cultivated for natural fibre. The field experiment was conducted in Pre-Kharif season of 2014 in Mondouri Research Farm, of Bidhan Chandra Krishi Viswavidyalaya, Mohanpur, Nadia, West Bengal. This farm is located very close to the tropic of cancer having approximately 89º E longitudes, 23 º N latitude and about 9.75 in altitude above the sea level. The experiment was in a Factorial Randomized Block Design replicated thrice with first factor variety i.e. V1-JRC 321, V2- JRC 698, V3- JRCJ 2 and V4-NDJC 2011 and Second factor fertilizers with three levels i.e. F1-60:13:25, F2-80:17.5: 33.3 and F3- 100:21.8:41.7. The plant height was not significant at the harvest stage. 

Abstract

From very ancient time the farming was practiced organically without using any chemical pesticides or fertilizers. In the mid-19th century, the chemical farming was introduced and the adverse impact of chemical fertilizers and pesticides in agriculture is in sight with deterioration of soil quality, quality of food and so on.The indiscriminate use of agro-chemicals in different crops causes numerous health hazards as well. In this context, organic farming came into existence in 20th century due mainly to produce quality foods through the rapid change in agriculture sector. Therefore, an attempt was taken through present investigation to cultivate potato without using any synthetic agro-chemicals by employing Kufri Pukhraj cultivar during kharif season. Potato is basically rabi season crop but due to climatic advantages of the south Chhotanagpurplateau of Jharkhand it can successfully grow during kharif season too.

Abstract

A field experiment was conducted in an aericendoaquept (pH, 6.67; organic carbon,  CEC,) to study the relative efficiency of different organic manures on the changes in some selected soil properties growing rape (cv. B-9) in a randomised block design replicated thrice using different combinations of organic and inorganic chemical fertilizers (T1- NPK 100%, T2- Compost 100%, T3- Compost 50% + NPK 50%, T4- Vermicompost 100%, T5- Vermicompost 50% + NPK 50%, T6- FYM 100% and T7- FYM 50% + NPK 50%). However, the objectives of the study was to assess the relative efficiency of organic manures with respect to availability of nutrients in relation to yield of rape affected by combined application of organic manures and chemical fertilizers. The results show that the amount of available N, organic carbon content, CEC and K contents were found highest in the treatment T5 where Vermicompost 50% + NPK 50% was applied combinedly.

5.1. Nature and role of soil enzymes
    General account
    Role in terrestrial ecosystems
    Role in aquatic ecosystems

5.2. Environmental conditions and microbial enzyme activity

Brooding and Rearing Practices Used for Chicken

What is Brooding?

Rearing of young ones immediately after hatching for at least 2-3 weeks, either by natural means or by artificial method is called brooding. Brooding is done by two ways i.e., Natural or Artificial ways.

Natural Brooding

In the natural method a desi fowl which acts both as incubator and brooder is used to raise only a small number of chicks. She sits on eggs (chicken) for 21 days to produce chicks from fertile eggs and broods thereafter.

Types of Brooders

Brooding is a mechanism of providing auxiliary or supplementary heat to chicks through artificial heat using brooders. Brooders are of several types depending upon the size and the nature of fuel used. These are individual, multiple units or central heating systems run by coal, wood, oil, gas or electricity. The essentialities of a good brooder are i) a dependable mechanism, ii) supply of fresh air, iii) dryness, iv) adequate space, v) easy for cleaning and disinfection, vi) protection against enemies, vii) safety from fire and viii) economy.

i) Hover brooders

Such brooders are more widely used in India wherever electricity is available. They maintain uniform temperature, convenient for operation and require very little attention. However, eclectic brooders do not heat house appreciably in very cold weather. Wet litter may be another problem requiring frequent stirring and renewal of litter.

Management of the poultry house environment forms an essential aspect towards maximizing production performance. Generally, proper maintenance of poultry litter is seldom given emphasis. The condition of litter significantly influences bird’s performance and ultimately affects the economy for rearing. The litter is defined as the bedding materials of around 5-6 cm height consisting of locally available materials like rice husk, peanut hull, wood shavings, paper shreds, sawdust or groundnut hulls. These materials can be used alone or in combination to rear the birds on floor under deep litter system of management. The excreta, feathers, spilled feed and water are mixed with bedding material, get further decomposed due to heat and bacterial action resulting in built-up-litter towards the end of rearing.

Any deviation from optimum state could be referred as stress. Every living creature has to pass through one or the other type of stresses in life. Most of the farm animals including poultry suffer from various types of stresses. These include due to:

Adverse environment

Managemental practices

Diseases

Nutritional deficiency

Transportation etc.

For maximization of productivity in any kind of poultry venture the knowledge on the behaviour of birds and its application play very significant role. Behaviour is the reaction of the whole organism to certain stimuli, or the manner in which it interacts to its environment. Behavioural patterns are not inherited as such, but develop through the process of growth and get differentiated under the influence of genetic and environmental factors. Primary function of behaviour is to enable the bird to adjust itself to some changes in condition, whether external or internal. Most animals have a behavioural pattern which can be tried out in a given situation and in this way they learn to apply one or the other according to that which produces the best adjustment.

Chicken’s eggs have been used as a food item by human beings since antiquity. The egg is composed largely of the proteins out of the three most important dietary essentials (proteins, fats and carbohydrates). The egg proteins are highly digestible and remarkably complete, containing the most important essential amino acids. The amino acid profile of egg is similar to the ideal balance of amino acids needed by humans. It also supplies various minerals, some in significant amounts, and contains a range of vitamins. The nutritive excellence of the egg enhances the value of any food in which it is incorporated. Meeting consumer demands is a constant challenge for the poultry industry. Present day consumers desire somewhat distinct products with respect to safety, healthfulness, freshness, taste, color, etc. To remain competent, various companies have developed several designer and specialty eggs which have appeared in supermarkets.

Artificial insemination (AI) is the deposition of the semen or male germ cells (spermatozoa) in the female genital tract by artificial means (instruments). Artificial insemination includes collection of semen from the male, preservation, handling and deposition into the female reproductive tract hygienically replacing natural mating by a male. In India this technique is gaining momentum in chickens due to improved animal husbandry practices and economic considerations, initiated by IVRI, Izatnagar and JNKVV, Jabalpur. In many parts of the world, turkey, ducks, goose and guinea fowl are bred solely by AI. Chicken species are endowed with the behaviour and capacity of each male to mate several females and also 25 to 40 times a day. Further, the process of ovulation in birds is almost daily and stimulated by intensity and duration of light.

In modern poultry managemental practices of using cages, environmentally controlled houses and breeding and hybridization techniques employed for developing highly economical chickens, selection for faster growth and heavy body weight in broilers, which has led to loss of fertility and hatchability and use of dwarf female parents in broiler industry have demanded the use of AI in poultry.

1    Ruminants
2    Canines

The usage of different pure chemicals and their combinations in treating various disorders of the livestock has been listed in this chapter.

The drug action can be adversely affected by the presence/concomitant administration of another drug/ agent, may be inhibiting its absorption, metabolism or excretion. Some of the drugs are incompatible with IV fluids, resulting in their inefficacy. The important drug interactions to be taken into consideration while administering a drug, are tabulated in this chapter.

1    Consent form for surgery

2    Consent form for euthanesia

3    Slaughter certificate

4    Wound certificate

5    Proforma for export certificate of dogs

Sexual behavior

The pattern of courtship, display, motor activities and postures are directed to bring the male and female gametes together to ensure fertilization and pregnancy. The components of copulatory patterns are sexual arousal, courtship (sexual display), erection, penile protrusion, mounting, intromission, ejaculation, dismounting and refractoriness. The duration of courtship and copulation varies with the species both events are shorter in cattle and sheep than in swine and horses. The males sniff and lick the genitalia of female are more common and an important way of chemical communication through olfaction. Except in swine, the males smell the female’s urine and then raise head, with lips curled, in the ritualized “Flehmen’s reaction”. In sheep, goat and cattle, tactile stimulation of the female is made by nuzzling and licking the perineal region, whereas with the horse, the stallion often bites the female’s neck and in swine, the boar noses her flanks.

There is no rapid direct test to determine fertility of semen sample. During freezing and thawing of semen, 20-80% of the spermatozoa become immotile or dies. In addition to this, there may be damage to spermatozoa by disintegration of sperm cell membrane and acrosome leading to loss of intracellular enzymes. The only reliable method to evaluate the semen is to inseminate a cow and get a calf at the end of gestation period. Now-a-days new methods have been developed for in-vitro assessment of fertility of spermatozoa. Some of these methods are exhaustive, time consuming, need for a full-fledged analysis and difficult under field conditions.

The progress of AI organization depends upon the type of service over and above that initially expected by the members. A well-conducted field service is very important in expanding the growth of any breeding organization. It includes activities as publicity, cooperation in health control, production testing and culling and progeny appraisal, the holding of demonstrations and open house and participation in cattle shows. The salary of a technician with bonus incentive encourages to do work of a high order. The semen costs per inseminated cow can be reduced by maintaining highest quality standards in producing, processing and shipping, by increasing number of cow serviced and by cutting all unnecessary costs. When breeding efficiency is high, the required amount of semen is kept at a minimum. An increase in cows inseminated is a key factor in keeping an organization in the back.

DNA (deoxyribonucleic acid), the giant molecule that carries genetic information in living things, is made up of just a few chemical building blocks that bond together in very particular ways. A typical molecule of DNA consists of two strands that are linked together. A segment can be visualized as a ladder-like structure:

The DNA as made of two strands, a left and a right, which are linked in the middle. In reality, since the ladder is twisted, there really is no “right” or “left,” but we use that terminology here since it applies to the model graphs. The square shapes and diamonds you see in the middles of the “rungs” are the links, which are meant to represent the different chemical bonds between the two strands of DNA.

6.1 Prokaryotic Gene Expression
    
6.2 The lac  Operon
    
6.3 The trp  Operon

10.1 Plasmids
    
10.2 Retrovirus

The United Nations had declared the decade of 90s (1990-1999) as the International Decade for National Disaster Risk Reduction to enable developing countries to build up their capacity to cope up with disasters. The Government of India also set up a High Powered Committee (HPC), in August 1999, to review the preparedness and mitigation of natural and manmade disasters and recommend measures for strengthening the organisational structures and a comprehensive model plan for management of disasters at national, state and district level. The HPC after due deliberatons submitted the report in Feb. 2001. The HPC identified the disasters under the following types (categories) :

Introduction

Landslides are simply defined as mass movement of rock, debris or earth down a slope and have come to include broad range of motions whereby falling, sliding and flowing under the influence of gravity dislodges earth material. They often take place in conjunction with earthquakes, floods and volcanoes. At times, prolonged rainfall cause heavy landslides, that block the flow of river for quite sometime.

Appendix-'E'    :    How can Cummunity Reduce Carbon 
            Footprints

1.    Downy mildew
        
2.    Powdery mildew
        
3.    Anthracnose/Bird’s eye spot

1.    Stem rot/Foot rot
        
2.    Powdery mildew
        
3.    Anthracnose
        
4.    Ring spot
        
5.    Leaf curl

1.    Bud rot
        
2.    Stem bleeding
        
3.    Grey blight
        
4.    Basal Stem Rot

1.    Coffee rust/Oriental leaf disease
        
2.    Black rot or Koleroga
        
3.    Die back or Anthracnose
        
4.    Damping off/Collar rot
        
5.    Berry blotch

1.    Damping off
        
2.    Phomopsis fruit rot or blight
        
3.    Collar rot
        
4.    Bacterial Wilt
        
5.    Little leaf

1.    Anthracnose
        
2.    Bean rust
        
3.    Yellow mosaic
        
4.    Common bean mosaic/green mosaic

1.    Rhizome rot/soft rot
        
2.    Leaf spot
        
3.    Yellows disease
        
4.    Banded leaf blight
        
5.    Cercoseptoria leaf spot
        
6.    Bacterial wilt

33. GEOTECTONICS

Introduction

Geotectonics is the branch of geology which deals with the structure and movements of the earth’s crust. It includes the study of large-scale features like mountain chains, mid-oceanic ridge and oceanic trenches. Investigation regarding the form, pattern and genesis of these, and other tectonic units have enabled geo-scientists to ascertain the important characteristics of earth’s crust and reconstructs its evolution and geological history.

33. GEOTECTONICS

Introduction

Geotectonics is the branch of geology which deals with the structure and movements of the earth’s crust. It includes the study of large-scale features like mountain chains, mid-oceanic ridge and oceanic trenches. Investigation regarding the form, pattern and genesis of these, and other tectonic units have enabled geo-scientists to ascertain the important characteristics of earth’s crust and reconstructs its evolution and geological history.

Abstract

This chapter will look at the major reasons why farmers in India are unable to take advantage of Agricultural profession as a mode of generating income and suggest ways to change this by employing new technologies. Agriculture has basic processes which require identifying the season for planting the seeds at the right time, watering the plants to the required level, undertaking maintenance for the different plants and then finally harvesting at the right time to ensure that the effort that has been put into the agricultural process results in useful output. In business terms the output when it is valued in terms of money, should enable the farming business to sell their output at a certain price that will enable them to pay off the money that has been used for setting up the crop for that cycle. This chapter will underscore the valuable contribution of remote sensing data in farming to enhance operational decisions. We will look at how low-cost technologies can be implemented into the existing agricultural extension activities and help farmers make better decisions that will enable them to be more business oriented. It is envisaged that incorporating high technology-based data into simple to understand terminology willhelp reduce the burden on farmers. This is due to the lack of knowledge but also due to the low volume of information that is possible to be fed to the farmers through the agriculture extension network in the country. However, due to the varied nature of farming in India it is difficult for extension officers to specialise but concentrate their efforts on widely utilised crops in an area. The following figure below explains in simple terms how the cycle of activities occur in a farmer’s world and where business decisions are taken that will have an impact on the profitability.

Introduction

In the last two decades global climate change has perceptible and marked impact on the monsoon pattern in India. Delayed and inadequate monsoon has become a recurrent feature and the country is in the grip of drought-flood cycles. Right from the beginning of large scale irrigation that brought green revolution and food self sufficiency to the country, there is a strong feeling that full potential of rivers of the country is not tapped (Table 1).

Atoms and molecules are the essential building blocks of every object. The manner in which things are constructed with these basic units is vitally important to understand their properties and their reciprocal interactions. An efficient control of the synthetic pathways is essential during the preparation of nanobuilding blocks with different sizes and shapes that can lead to the creation of new devices and technologies with improved performances. Traditionally nanoparticles were produced only by physical and chemical methods. Some of the commonly used physical and chemical methods are ion sputtering, solvothermal synthesis, reduction and sol gel technique

Basically there are two approaches for nanoparticle synthesis namely the Bottom up approach and the Top down approach. In the Top down approach, scientists try to formulate nanoparticles using larger ones to direct their assembly. The Bottom up approach is a process that builds towards larger and more complex systems by starting at the molecular level and maintaining precise control of molecular structure.

These two different methods highlight the organization level of nanosystems as the crossing point hanging between the worlds of molecular objects and bulk materials.

The top-down approach has been advanced by Richard Feynman in his often-cited 1959 lecture stating that “there is plenty of room at the bottom” and it is ideal for obtaining structures with long-range order and for making connections with macroscopic world. Conversely, the bottom-up approach was pioneered by Jean-Marie Lehn (revealing that “there is plenty of room at the top”) and it is best suited for assembly and establishing short-range order at the nanoscale. The integration of the two techniques is expected to provide, atleast in principle, thewidest combination of tools for nanofabrication.

The most commonly used technique has been discussed and we have tried to generalize the type of particle that can be synthesized by each of these methods. Though it is not a rule that is applicable to all cases but it can be applied to most cases.

Polymerization Radical Polymerization

The polymerization could be a free radical polymerization or an atom transfer radical polymerization. The process of atom transfer radical polymerization (ATRP) is better than the free radical polymerization as control of molecular weight and size of the particle can be achieved. The coating of polymer on silica nanoparticles is generally done by ATRP. The surface of the silica particle is modified with a suitable initiator.

1. Mechanical Properties of Nanomaterials

Scientific challenges in nanoscience and nanotechnology include the development of nanomaterials with novel mechanical properties. The need for scratch, mar and/or abrasion resistance is well established in various markets, including fingernail polishes, flooring, plastic glazing, headlamp covers and other automotive parts, transportation windows and optical lenses, where clear scratch-resistant coatings are used. Because the nanosize, many of their mechanical properties of the materials is modified, among others, hardness and elastic modulus, fracture toughness, scratch resistance, fatigue strength, and hardness. Energy dissipation, mechanical coupling within arrays of components, and mechanical nonlinearities are influenced by structuring components at the nanometer scale. This includes also the interpretation of unusual mechanical behavior (e.g., strengths approaching the theoretical limit) and the exploration of new ways to integrate diverse classes of mechanically functional materials on the nano-size.

A Scanning electron microscope (SEM) is a type of electron microscope that images a sample by scanning it with a high-energy beam of electrons in a raster scan pattern. The electrons interact with the atoms that make up the sample producing signals that contain information about the sample’s surface topography, composition, and other properties such as electrical conductivity.

The types of signals produced by an SEM include secondary electrons, back-scattered electrons (BSE), characteristic X-rays, light (cathodoluminescence), specimen current and transmitted electrons. Secondary electron detectors are common in all SEMs, but it is rare that a singlemachine would havedetectors for allpossiblesignals. The signals result from interactions of the electron beam with atoms at or near the surface of the sample. In the most common or standard detection mode, secondary electron imaging or SEI, the SEM can produce very high-resolution images of a sample surface, revealing details less than 1 nm in size. Due to the very narrow electron beam, SEM micrographs have a large depth of field yielding a characteristic three dimensional appearance useful for understanding the surface structure of a sample.

Nanotechnology has the potential to revolutionizethe agricultural andfood industry with newtools forthemoleculartreatmentof diseases, rapid disease detection, enhancing the ability of plants to absorb nutrients etc. Smart sensors and smart delivery systems will help the agricultural industry combat viruses and other crop pathogens. In the near futurenanostructured catalysts will beavailable which will increase the efficiency of pesticides and herbicides, allowing lower doses to be used. Nanotechnology will also protect the environment indirectly through the use of alternative (renewable) energy supplies, and filters or catalysts to reduce pollution and clean-up existing pollutants.

Over the past few decades, the fields of science and engineering have been seeking to develop new and improved types of energy technologies that havethe capability of improvinglifeall over the world. In order to make the next leap forward from the current generation of technology, scientists and engineers have been developing Energy Applications of Nanotechnology. Nanotechnology, a new field in science, is any technology that contains components smaller than 100 nanometers. For scale, a single virus particle is about 100 nanometers in width.

An important subfield of nanotechnology related to energy is nanofabrication. Nanofabrication is the process of designing and creating devices on the nanoscale. Creating devices smaller than 100 nanometers opens many doors for the development of new ways to capture, store, and transfer energy. The inherent level of control that nanofabrication could give scientists and engineers would be critical in providing the capability of solving many of the problems that the world is facing today related to the current generation of energy technologies.

People in the fields of science and engineering have already begun developing ways of utilizing nanotechnology for the development of consumer products. Benefits already observed from the design of these products are an increased efficiency of lighting and heating, increased electrical storage capacity, and a decrease in the amount of pollution from the use of energy. Benefits such as these make the investment of capital in the research and development of nanotechnology a top priority.

Nanotoxicology is the study of the toxicity of nanomaterials. Because of quantum size effects and large surface area, nanomaterials have unique properties compared with their larger counterparts

Nanotoxicology is that branch of bionanoscience, which deals with the study and application of toxicity of nanomaterials. The nanomaterials, even when they are made of inert elements like gold, become very active at a nanometer range. Nanotoxicological studies are intended to determine whether and to what extent these may pose a threat to the environment and to human beings. For instance, Diesel nanoparticles have been found to damage the cardiovascular system in a mouse model.

Human health and safety

Calls for tighter regulation of nanotechnology have occurred alongside a growing debate related to the human health and safety risks associated with nanotechnology. The Royal Society identifies the potential for nanoparticles to penetrate the skin, and recommend that the use of nanoparticles in cosmetics be conditional upon a favorable assessment by the relevant European Commission safety advisory committee. Andrew Maynard also reports that ‘certain nanoparticles may move easily into sensitive lung tissues after inhalation, and cause damage that can lead to chronic breathing problems’.

Skills and knowledge are the driving forces of economic growth and social development of any country. India is moving progressively towards becoming a ‘Knowledge economy’ it becomes increasingly important that the focus is made on advancement of skills and these skills have to be relevant to the emerging economic environment. In old economy, skill development largely meant development of shop floor or manual skills. In new or knowledge economy the skill sets can range from professional, conceptual, managerial, operational behavioral to interpersonal skills and inter-domain skills. In the 21^st century as science progresses towards a better understanding of the miniscule, that is, genes, nano-particles, bits and bytes and neurons, knowledge domains and skill domains also multiply and become more and more complex. Micro enterprise development is one of the strategies seen to bring about pro-poor economic growth.