eChapters

With increasing industrialization, water sources available for consumption as potable water are being adulterated with industrial, animal and human wastes. As a result water has become a formidable factor in disease transmission. Polluted water usually contains large amount of organic matter which forms nutritional base for growth and multiplication of microorganisms. Usually the water with non-pathogenic organisms, like autotrophs and saprophytic heterotrophs, are not of major concern, but presence of intestinal contaminants of fecal origin are of great concern. These pathogens are responsible for intestinal infection such as bacillary dysentery, typhoid fever, cholera and paratyphoid fever.

The detection of all the intestinal pathogens on a routine basis would be a tedious and difficult task, however, it would be easy to demonstrate the presence of some of the nonpathogenic intestinal organisms like Escherichia coli and Streptococcus faecalis. These are always found in intestine but their detection confirms the contamination of water with fecal material. Such organisms are also called pollution indicator.

Abstract

The main aim of the article is to identify the strengths, weaknesses, opportunities and threats of current IPR system in context to Indian regime and also to understand overall planning as well as important tactics and means to use IP legal protection system to fully safeguard one’s legitimate rights and interests, obtain and maintain competitive edges, restrain competitors and seek optimal economic performance by selection of appropriate IP strategies. This article also proposes ways to select IP strategy based on BCG matrix and product mix.

Food adulteration is an unethical and often criminal malpractice. It is very common in countries of the South-East Asia region. It frequently occurs where informal food production and marketing services are predominant and enforcement of food regulation is weak. The prohibited substances are either added or used to partly or wholly substitute healthy ingredients. This creates the impression of freshness in old food artificially. Adulteration in food is usually done for financial gain. The high target is spices due to the demand and also their high price. Sometimes it can happen due to lack of proper hygienic conditions of processing, storage, transportation and marketing. The consumer is either cheated financially or becomes a victim of illness or disease. In case, the consumers take a lot of precautions at the time of purchase of such products it would help them in avoiding the purchase of such adulterated food. The whole spices: Dirt, dust, other seeds; chili powder: brick powder, salt powder or talc, powder. In ghee/butter: vegetable ghee, animal fat, mashed potato, sweet potato, etc. ; ice cream and beverages:saccharin; honey: jaggery, sugar syrup. Food contaminants are not added to the foods. They are present in foods as a result of the production (crop farming, animal husbandry and aquaculture), manufacture, processing, preparation, treatment, packing, packaging, transport or holding of such food or as a result of environmental contamination. Usually it includes the presence of harmful chemicals or microorganisms in food, which if consumed can cause several debilitating illnesses. Many times, unknowingly, the contamination may occur during the production, processing, storage and marketing.

Even after public concern the scientists feel that the GMO foods are quite safe. According to them the genetically-engineered crops are very safe to eat as much as the non-GE of the same crop. According to them the environment has improved by reducing the use of pesticides. GMO stands for genetically modified organism. Soy, corn, or other crops are very common as GM crops which are made by genetically engineered DNA. Many have come to the conclusion that GM foods are safe, healthy and sustainable. However, some people are against them. There are many benefits of GM crops like less water or pesticides to be used. Genetically engineered crops fight diseases to save the foods. At the same time the industries/ farmers that grow them are also benefitted. These foods have higher nutritional profiles, both in the US and abroad like corn which is one of the most prominent GMO foods. Soy is found in tofu, vegetarian products, soybean oil, soy flour and many other products. The other major crops taken for genetic modification are Papayas, Canola and Cotton. For dairy products a lot of work is being done on the genetic engineering of animals in a big way. This is going to be the most intractable environmental challenge of the 21^st Century. Presently, around 92% of the U. S. corn (GE), 94% of soybeans and 94% of cotton are genetically engineered.

Due to the globalization of the food supply there has been a need to strengthen food safety systems in and between the countries. In this regard the World Health Organization (WHO) has promoted efforts in improving the food safety from farm to plate which started on World Health Day, 7 April 2015. The World Health Day 2015 slogan was “From farm to plate, make food safe”. The informal food production and marketing system is still strong in most countries of the South-East Asia Region, for the enforcement of food safety regulations. Traditionally, the preferences have been for hot and well-cooked food. These habits are partially responsible for preventing foodborne infections. In many countries street food has become very popular as it is cheap. Hygienic conditions are improving, provided that potable water supply and clean facilities are ensured by municipal authorities. Many waterborne and diarrhoeal diseases could be prevented with the introduction of bottled drinking water. The awareness and education on food safety by the consumers has strengthened in the enforcement of food standards. This has improved the hygienic practices and has helped in the prevention of foodborne illnesses. The “WHO Five keys to safer food” serves as the basis for educational programmes to train food handlers and educate the consumers. These help in preventing the foodborne illnesses. The important points are to keep food surfaces clean, washing of all utensils, plates and cutlery, keeping the raw food separate from the cooked food. Cooking food thoroughly to the appropriate temperature, keeping food at safe temperatures, both for serving and storage and using safe water and raw materials.

Josephson (1977) studied the effects of food irradiation and sterilization. In radiation sterilization of food (radappertization) the food is exposed in sealed containers to ionizing radiation at absorbed doses which are high enough (25-70 kGy) to kill all organisms of food spoilage and public health significance. Radappertization is analogous to thermal canning for enhancing the shelf stability. In dry products the radappertization process requires the food to be heated to an internal temperature of 70-80°C (bacon to 53°C) to inactivate autolytic enzymes which catalyze spoilage during storage without refrigeration. In order to reduce off-flavors and odors, undesirable color changes, and textural and nutritional losses from exposure to the high doses of irradiation the foods are vacuum sealed and irradiated frozen. Radappertozed foods have the characteristic of fresh foods prepared for eating. Irradiation can be a good substitute for some chemical food additives such as ethylene oxide and nitrites which are toxic, carcinogenic, mutagenic or teratogenic either wholly or in part. Till now, there is no evidence of any adverse effects of radappertization on the foods. Extensive research has taken place towards the space food. During the planning of Apollo missions, Space Food NASA Technical Reports Server (Space Food NASA Technical Reports Server, NTRS ,1994 ) conducted trials including freeze drying.

Henderson et al., (2010) have studied the different aspects of food regulation. The authors have looked into the perceptions of Australian consumers’ who is and should be responsible for food safety. Forty-seven participants were interviewed as part of a larger study on trust in the food system. Participants associate food governance with government, industry and the individual. While few participants can name the national food regulator, there is a strong belief that the government is responsible for regulating the quality and safety of food. Personal responsibility for food safety practices was also identified. Little evidence is found in the politicisation of food, reflecting a level of trust in the Australian food governance system that may arise from a lack of exposure to major food scares. According to Wood (1990) the marketing of food service program in an Ohio district is directed toward the students and also at the community, school administrators, teachers, and employees. Students are encouraged to follow a healthier way of eating.Jones (1998) studied the role of food safety in the food chain from farm to fork. In response to growing threat of food-borne illnesses the federal government had launched the Food Safety Initiative. A key element is the Hazard Analysis Critical Control Point’s system (HACCP). Under this it has been designed to make everyone in the food-delivery chain to be responsible for ensuring a safe food supply.

For looking into the biosafety in research laboratories, agriculture and other food producing industries it is important to look into the numerous strains of lactic acid bacteria that are associated with food systems and are capable of producing bacteriocin or antibacterial proteins with activity against foodborne pathogens such as Listeria monocytogens, Staphylococcus aureus and Clostridium botulinum. Recently considerable attention has been given on the identification of these proteins and their biochemical properties including spectrum of activity, production conditions, purification procedures, aminoacid composition and mode of action. Advances in genetic engineering have facilitated the characterization of proteins at genetic level, providing information about protein synthesis, structure and cloning of bacteriocin genes into other organism. One problem in the use of bacteriocin in their applications as bio-preservatives is the emergence of resistant population. The understanding on the mechanism of resistance to bacteriocins is limited which limits the application in biopreservation. Much of the work on bacteriocin has been done under controlled laboratory conditions without the presence of adventitious microbial population. More research is needed to determine the efficacy of bacteriocin producing organisms and bacteriocins which are stable under commercial conditions. Foodborne illness is a major international problem and an important cause of reduced economic growth. The contamination of the food supply with the pathogens and its persistence, growth, multiplication and/or toxin production

Photosynthesis is an important physiological process associated with plant growth and productivity. During the process of photosynthesis, the solar energy is trapped and converted into chemical potential which is later used for the reduction of CO₂ into carbohydrates. The powerful reductant, NADPH that is needed for carbon reduction is generated by the light driven reactions of the chloroplast lamellar system. Photosynthesis can be summarized as follows.

Growth and differentiation are regulated by a group of organic compounds known as growth regulators. These growth regulators regulate growth not only at the organ level but also in the plant as a whole. They can be broadly defined as organic compounds synthesized in one part of a plant transported to another where at very low concentration they cause a physiological response.

There are five major groups of growth regulators, namely, the Auxins, Gibberellins, Cytokinins, Ethylene andAbscisic acid. Endogenously synthesized growth regulators are often referred to as plant growth hormones. However, a number of synthetic compounds eliciting similar response as that of the growth hormones have been identified and extensively used. These synthetic hormones effectively substitute the endogenous hormones to understand the basic mechanisms of hormones and also for commercial use.

In chemistry, and especially in biochemistry, a fatty acid is a carboxylic acid with a long aliphatic tail (chain), which is either saturated or unsaturated. Most naturally occurring fatty acids have a chain of an even number of carbon atoms, from 4 to 28. Fatty acids are usually derived from triglycerides or phospholipids. When they are not attached to other molecules, they are known as “free” fatty acids. Fatty acids are important sources of fuel because, when metabolized, they yield large quantities of ATP. Many cell types can use either glucose or fatty acids for this purpose.

ABSTRACT

The carbonatites are genetically and geochemically distinct and contain several rare earth minerals that are unknown or are very rare in other types of rocks. A useful review of the REE’s in carbonatites is given by Cullers and Graf (1984), who point out that carbonatite contains the highest concentration of REE’s and highest LREE: HREE (La:Lu) ratio of any igneous rock. High REE abundances are considered as the diagnostic character of carbonatites to discriminate them against recrystallized limestone. Rare earth mineralization in carbonatities can be classified into three categories. The first is primary magmatic crystallization (bastnaesite). The second is hydrothermal mineralization and the third is supergene mineralization produced by weathering of carbonatitie bodies. The only economic Nb mineral in carbonatite is pyrochlore. Apatite deposits constitute the largest bulk mining in carbonatites and have higher phosphate content than marine phosphorites. Pyrochlore, cubic fergusonite, eschynite, Fe-Nb rutile, monazite apatite, bastnaesite and allanite are the rare earth minerals that are enriched in Tamil Nadu carbonatites. Such enrichment of above rare earths is typical of undersaturated alkaline complexes. The lanthanides are seen associated with these minerals, mainly the light lanthanides are predominant than heavier ones. Thus the carbonatite complexes provide the locus for several metal deposits that are presently of strategic importance, containing elements, which are otherwise largely dispersed in earth crust.

ABSTRACT

India is blessed with large reserves of strategic and economically important heavy minerals such as ilmenite, rutile, leucoxene, zircon, monazite, garnet and sillimanite. These deposits are mostly located in the coastal stretches of Peninsular India especially between the high tide line and 200-250m inland, with the exception of few inland deposits. Ilmenite is the largest constituent of the Indian beach sand deposits, followed by sillimanite and garnet. These minerals are one of the largest and higher grades in the World. The Indian Ilmenite resource base totals 348 million tones (Mt), along with 18 Mt of rutile, 21 Mt of zircon, 8 Mt of Monazite, 107 Mt of garnet and 107 Mt of sillimanite. Although Indian heavy mineral resources are one of the largest in the world, it is observed that the Production to Reserve Ratio (PRR) is a meager 0.0013; that is insignificant compared to other countries with similar resources.

ABSTRACT

Sedimentological studies such as textural, heavy mineral and clay mineralogy have been carried out for Warkalli Formations at Varkala, situated in the southern part of Kerala, India. The X-ray diffraction study reveals that kaolinite is the only clay mineral present in all the samples with trace amounts of gibbsite and goethite. The higher amount of kaolinite and gibbsite indicates warm and humid paleoclimatic conditions. The textural analysis shows that the sediments are moderate to poorly sorted, nearly symmetrical to fine skewed and lepto to mesokurtic in nature. A plot of skewness against sorting shows fluvial trend. The major heavy minerals present in the samples are magnetite, ilmenite, rutile, sillimanite, anatase and zircon. It can be inferred from these studies that these sediments would have been deposited in a lagoon by fluvial action. During that time, the source region has experienced tropical humid climate with mean annual precipitation (MAP) above 200 cm and intensive chemical weathering. Heavy mineral assemblage indicates medium to high grade metamorphic source rocks.

ABSTRACT

The geological and geomorphological features could be clearly demarcated in and around Salem area using IRS -IB LISS II satellite data. Geologically,the study area is classified into four major rock types fissile hornblende biotite gneiss, banded magnetite quartzites, peninsular gneiss, charnockites and quartzites. The geomorphological study reveals the buried pediments medium, buried pediments deep, bazada zone, along with lineaments. Intersections of the lineaments are the most prospective zones for further groundwater targeting. Shallow pediments and pediments are the less groundwater prospective zones. But detailed geophysical survey as required to sink new bore well, dug well, dug cum bore wells.

ABSTRACT

The present paper discusses about the Geoelectrical response over Charnockite rocks and Biotite Gneiss rock types of Sankaran kovil and Tenkasi Taluks of Tirunelveli District, Tamilnadu. The study area is adjoined to the Western Ghats which geologically comprises Archean crystalline hard rocks. In this attempt, about 7 Vertical Electrical Soundings (3 in Gneiss and 4 in Charnockite) have been carried out in both terrains. The VES values were interpreted with Schlumberger Sounding Dada Processing and Interpretation Program .The resistivity values varied from 68 m to 808 m with the layer thickness of 10m, 20 m and 29m in the biotite gneiss terrain. Similarly, the resistivity values varied from 48 m to 444 m with the layer thickness of 4m, 6m, 9m,18m & 29m in the charnockite terrain. But the depth to massive rock for both the rock types has been observed below 29m. In this study, a difference in resistivity with high resistivity values in gneissic terrain and lower values in charnockite terrain have been observed. The observed resistivity differences are mainly due to the presence of resisting minerals such as biotite and hornblende. Besides, other factors like weathering and water table also influence the resistivity values. Hence, it is summerised that the geoelectric methods are the best methods to understand the subsurface lithostudies.

ABSTRACT

Identification and mapping of fractures/lineaments and hydrogeomorphic units is prerequisite for undertaking ground water exploration and development in any terrain. Remote sensing and GIS techniques have been used for ground water potential mapping in Theni District. The study area has been divided into various geomorphic units based on visual interpretation of LISS III and PAN merged data in false colour composite on 1:50,000 scale. Ground water potential of each of the geomorphic units was assessed and correlated with geology, structure and recharge factors prevailing in the Theni District.

ABSTRACT

Ground water is an important source of water supply throughout the world for irrigation, industries, municipalities and rural homes and the dependence of an Indian village is on its water source only. The quality of water is as important as its quality. The quality required of a groundwater supply depends on its purpose such as drinking or agricultural or industries. To establish quality criteria, measures of chemical, physical, biological constituents must be specified as well as standard methods for reporting and comparing results of water analysis .For that a case study is to be made. Cuddalore district is a rapidly growing urbanized industrial area and lies at the east coast of Tamil Nadu in India. It mainly depends on the ground water. Water quality data for the observation wells from the year 1989 to 1999 were collected and spatial distribution of the groundwater quality is analysed using geographic information system. The important factors such as pH, Chloride shows higher level and generally occur in the central belt of the study area which is rich in mineral wealth. Compared to the eastern half the western half shows better quality of water. From the analysis, 80% of the study area is suitable for agricultural purpose and 75% of the study area is suitable for domestic and drinking purpose.

ABSTRACT

The occurrence of fluoride more than permissible limit has been observed in ground water near Danishpet, Rajammannar Colony, Vayapurikombai, Melkombai, Umbilikampatty, Andikottai HC in Kadyampatty area, Salem district. Fluoride reaches to a maximum of 2.8 mg/l. Fluoride concentrations in ground water in various areas are as follows: Danishpet(2.0mg/l), Rajammannar Colony (2.8mg/l), Vayapurikombai (2.4 mg/l), Melkombai (2.4mg/l), Umbilikampatty (2.2 mg/l), and Andikottai HC (2 mg/l).. Granite gneiss and associated secondary vein filling minerals may be the source of high fluoride in ground water. The high concentration of Fluoride in ground water has led to human health hazard in the form of dental and skeletal deformation in the parts of Danishpet, Rajammar Colony, Vayapurikombai, Melkombai, Umbilikampatti and Andikottai HC villages.

INTRODUCTION

Remote Sensing is an indigenous tool for the Environmental Impact Assessment study. It plays vital role in preparing various thematic maps for understanding the changes that have taken place in an area before and after the establishment activities. In this study we have utilized the capability of the remote sensing techniques in understanding the mining environment. Our study area is in and around the Dalmiapuram Cement Industry in the central part of Tamil Nadu state and it covers part of Trichy and Perambalur districts. It falls between 11₀ 02’ 42’’and 1₀ 03’ 08’’E and 79₀ 09’ 39’’and 79₀ 10’ 30’’N.Dalmiapuram Cement Industry is located in the Kovandakurichi village of Pullambadi block, Trichy district. The mines for cement manufacturing are Perianagalur (PNR), Periathirukonam (PTK), Kallakudi (KLK), Kovandakurichi (KVK) and A&K Mines.

The litho units are Limestone beds containing various proportions of bioclastic and siliciclastic materials. They show wackstone to rudstone fabric and have clasts of re-deposited bound stones. Deposition in a periodically restricted shallow marine setting was indicated by lithological and faunal information. Lower contact is an unconformity surface associated with marine flooding and the upper contact is non-depositional and erosional with overlying biostormal member.

Abstract

Ennore is an industrial region having many industries on chemicals, fertilizers, refineries etc., discharging their effluents into the Buckingham canal. Present study focuses on the impact of tsunami on water quality of Buckingham Canal segment found to the north of Chennai city, Tamil Nadu, India, in addition to the human interferences. Water samples were collected from surface and near bottom at five locations covering about 20km stretch of the Buckingham Canal during high tide on the spring tide day before (December 2004) and after (January 2005) the mega tsunami. Various water quality parameters measured were pH, Temperature, Salinity, Dissolved Oxygen, Suspended Particulate Matter, Nutrients and Chlorophyll. The maximum depth observed in the canal was 2.5m in December, whereas a shallow depth of less than 0.5m was recorded in January. The water quality analyses confirmed the incursion of saline water (upto 32ppt) into the Canal. Not much variations were observed in Dissolved Oxygen and pH. Because of the organic pollution in the canal, the water was rich in nutrients before tsunami, whereas due to the large quantity of seawater invasion, dilution had occurred after tsunami. High turbidity was observed in January 2005 indicating the tsunami induced disturbance and resuspension of the sediments from sea bed.

Keywords: Tsunami, Ennore, Tamil Nadu, Buckingham Canal.

Climate change and its variability imposed a great threat to agriculture production and ultimately on food security. Understanding of anomalies in climatic variables is essential to make agriculture sector resilient. Jharkhand state, geographically located at 22⁰ 28’ N – 25⁰ 30’ N latitude and 83⁰ 22’ – 87⁰ 40’ E longitude with an altitude up to 1142 m above msl and having humid to sub-humid tropical monsoon type of climate, has a number of agro-climatic/physiographic constraints. The state has 3 agroclimatic sub-zones viz; Central and North Eastern Plateau sub zone (zone IV), Western Plateau sub-zone (zone V) and South Eastern Plateau sub-zone (zone VI) falling under agroecological regions XI, XII and XIII. Zone IV is having 15 districts; Zone V has 6 and Zone VI have 3 districts. Agriculture in Jharkhand is very tedious due to topographical, physiographic and climatic constraints. Vagaries of climate put greatest limitation before the agricultural production system in the State. The State enjoying nature’s gift receives fairly a high amount of annual rainfall, on an average 1400 mm annually, of which more than 80% is instantly lost through high speed surface and sub-surface run-off causing loss of fertile soil and gully formation. The State’s agriculture is virtually mono-cropped, major production being confined in kharif season (June-September) during which period 80-82% of annual rainfall is received. Raising a second crop (rabi season crop Oct-Nov. to March-April) in most part of Jharkhand is almost impossible because of a very meager irrigation potential (8-10% only). In absence of proper and adequate water management practices crop failure during rainy season in case of prolonged dry spells, virtually no crop during rabi season and drinking/domestic water crisis in the months of March to mid June have become a common feature in Jharkhand. Anomalies/irregularities in monsoon and its distribution (prolonged dry spells, agricultural drought etc.) have been affecting the Jharkhand agriculture since long. Now, in recent years, the effect of global climate change due to global warming has started appearing very prominently in Jharkhand. Increase in frequency and severity of extreme weather events like heat wave (unexpected rise in temperature in summer months, right from mid February onwards), hail storm, drastic decrease in pre-monsoon convectional rainfall and cold wave/frost in winter etc. are putting additional climatic constraints before the Jharkhand agriculture.

Increasing evidences over the past few decades indicate that significant changes in climate are occurring across various regions of the globe in the form of increased occurrence of extreme weather events. The significant cause to this sustained increase in climate variability, known as climate change has been a resultant of increased level of greenhouse gases (GHGs) in the atmosphere. The reason for this increase is mainly ascribed to enhanced human activities such as industrialization, uncontrolled burning of fossil fuels, increased use of refrigerants and changed land use patterns and practices. Most significantly, the concentrations of GHGs like CO₂ has already crossed the 400 ppm mark, while other potential contributors like methane and nitrous oxide also show significant rise. As a result of the heat absorbing capacity of these gases, there has been a considerable rise in global mean temperatures, more so in the recent decade and more. The increase in mean air temperatures of the globe was 0.76⁰C during the past 100 years. This rate of increase has been higher during the past two decades and the recent period recorded the warmest years in sequence, the latest being the 2017. The impacts of the climate change are visible across all regions of the globe, in the form of increased occurrence of extreme weather events like severe droughts, floods, storms, heat waves, cold waves, high wind regimes etc. Besides the physical risks to life and increased discomfort, these events directly influence the quantity and quality of agricultural production adversely. They increase the production risks and threaten the food security of nations. Agriculture is one of the main sectors that is likely to be impacted by climate change and in a country like India, the consequences can be harsh with projections of decline in yields of major food crops due to warmer temperatures and increased drought risk in the coming decades. Thus risk characterization and risk management are critical issues in agricultural productivity management. The risks are higher in rainfed areas which are mainly dependent on the quantum and distribution of rainfall during the monsoon season of June to September over major part of the country. As against the national average of 40% of the total cropped area being irrigated, 60% of the total cropped area is still rainfed and is strongly dependent on uncertainties of monsoon. This shows that the dependency of Indian agriculture on climate is very large and as such the Indian agriculture is called a gamble in monsoon.

Climate change has become real and tangible affecting people. It is a major challenge for agriculture, food security and rural livelihoods. Climate change impacts on vulnerable groups have social, economic, political, and environmental implications. The impacts of climate change are global. India is more vulnerable in view of the high population depending on agriculture, which in turn is dependent on the seasonal monsoons. India is confronted with the challenge of sustaining rapid economic growth amidst the increasing global threat of climate change. Government of India has accorded top priority for addressing climate change related concerns.

The Government formulated the National Action Plan on Climate Change (NAPCC) in 2008. Climate change is a complex policy issue with major implications in terms of finance. All actions and solutions to address the adverse impact of climate change ultimately involve costs. Funding is vital in developing countries to design and implement adaptation and mitigation projects. NABARD has already taken various initiatives in addressing the challenges posed by Climate Change particularly in the areas of agriculture and rural livelihood sectors. In this direction NABARD aims to channelize national, international and private finances for adaptation and mitigation activities in India. The Green Climate Fund has been designated as an operating entity of the financial mechanism of the UNFCCC. In the context of sustainable development, the Fund aims to promote a paradigm shift towards low emission and climate-resilient development pathways by providing support to developing countries to limit or reduce their greenhouse gas emissions and to adapt to the impacts of climate change, taking into account the needs of those developing countries particularly vulnerable to the adverse effects of climate change. The Fund will play a key role in channelizing new, additional, adequate and predictable financial resources to developing countries and will catalyze climate finance, both public and private levels. The finance is expected to meet the agreed full and incremental costs for activities to enable and support enhanced action on adaptation, mitigation, technology development and transfer (including carbon capture and storage), capacity-building and the preparation of national reports by developing countries. NABARD is accredited as National Implementing Entity in 2015 on fast track. NABARD is eligible to submit large size projects having outlay of more than USD 250 million. The National Adaptation Fund for Climate Change (NAFCC) was established in 2015 to meet the cost of adaptation to climate change in India, particularly vulnerable to the adverse effects of climate change. In keeping with the commitment of NABARD to address impact of climate change the ”Climate Change Fund” was created out of the profit of NABARD during 2016-17 for facilitating attempts to address impacts of climate change especially towards fostering sustainable development. NABARD contributes annually from its profit towards the corpus of the fund. Institution of the “Climate Change Fund” is a unique initiative of NABARD as a Development Financial Institution to foster sustainable development and contribute meaningfully towards national priorities. The objective is to promote and support activities aimed towards addressing climate change impacts, adaptation and mitigation measures, awareness generation, knowledge sharing and facilitate sustainable development.

History and development of seed Industry in India can be discussed under two heads

1. Pre-independence development.
2. Post-independence development.

Removal of seeds from dry fruits is known as threshing while that of wet fruits is known as extraction. Threshing involves beating or rubbing the plant material to detach the seed from its pod or fruit. The detached seed is then winnowed to remove chaff, straw and other light material from the seed.

Threshing / extraction methods

1. Mechanical threshing

• Various types of threshing machines with adjustable cylinder speeds are available for extraction of vegetable seeds.
• Care must be taken to avoid damage to the seed during mechanical threshing, by properly adjusting the speed of the beaters, the width of the gap between the beaters and the concave, the airflow and the sieve sizes.

Seed certification

It is a legally sanctioned system for quality control and seed multiplication and production. It involves field inspection, pre and post control tests and seed quality tests. As per Indian Seed Act seed certification is voluntary and it is not compulsory. The seed that is sold in the market is of two types certified seed or truthfully labelled seed. Whereas truthfully labelled seed is one which is being produced and marketed by the producing company by maintaining the labelling standards.

Seed sampling

Seed sampling is to draw a portion of seed from seed lot that represents the entire seed lot. Seed lot is a uniformly blended quantity of seed either in bag or in bulk.

Purity analysis

Purity of a seed lot indicates in percentage how large a fraction is made up of pure seeds of the species in question, and how much is made up of inert matter and other seeds. Impurities may be any non seed material (leaf, flower, fruit fractions, soil etc.), small fractions of seeds of the actual species, as well as seeds of other species. Pure seed may include both dead and empty seed, plus damaged seed, purity does not tell anything about viability. The purity analysis of a seed sample in the seed testing laboratory refers to the determination of the different components of the purity viz., pure seeds, other crop seeds, weed seeds and inert matter. Each component is reported as a percentage of total weight. The objective of the purity analysis is to determine whether the submitted sample conforms to the prescribed physical quality standards with regard to physical components. Large seeds are generally easy to clean and purity analyses are therefore often omitted. However, for smaller seeds contamination with other seeds may occur e.g., during processing.

Seed viability tests

Only two methods, the Topographical tetrazolium (TZ) test and the embryo excision test were previously accepted by the International Seed Testing Association as official methods for some species of seeds. ISTA has recently accepted the X-ray method as a valid alternative to the cutting test for the detection of empty and insect-damaged seeds. The following tests can be applied depending on the circumstances.

Introduction

Underutilized fruits provide nutrition and sustenance of life to the native communities and prevent widespread malnutrition, combat micronutrient deficiencies and other dietary deficiencies, as these are rich in vitamins, minerals, protein, carbohydrates and fats. Vitamins like A, E and minerals like calcium, magnesium and iron are abundantly available in these fruits, which help in building resistance against diseases. Many underutilized fruits contain more vitamin C and pro-vitamin A than the widely available commercial species. Consumption of these fruits by the rural people directly from the trees further maximizes vitamin intake.

A healthy diet depends on a diversity of foods rich in vitamins and minerals. Whether wild, semi-domesticated or fully cultivated, the underutilized and neglected species are important for the well being of local communities. These fruit trees provide the essential supplements that ensure a balanced nutritious diet. Diet diversity is an extremely important element of nutritional well-being, in part because more essential nutrients are consumed and also because it improves the taste of staple foods thus encouraging greater consumption. One of the most common causes for dietary deficiencies appears to be the decreasing diversity of traditional diets. Underutilized fruits are common snack foods that provide vitamins, minerals, proteins, etc. and play important role in diets.

Sugars and sweetners: Sugars are present in all the actively metabolising plant cells in the form of glucose and sucrose. The under-exploited fruits that yield sugar are black maple, sugar maple, sugar palm, wild date palm, honey palm or coquito palm (Jubaea chilensis), talipot palm, nipa palm, toddy palm, palmyra palm (Table 1).

Introduction

The hot arid regions are spread over about 31.7 million ha area mainly in the States of Rajasthan, Gujarat, Andhra Pradesh, Punjab and Haryana, which inhabit on an average 61 persons per square km making up a population of nearly 20 million people. The Indian arid zone is characterized by high temperature and low and variable precipitation which limit the scope for high horticultural productivity. However, these conditions greatly favour development of high quality production in number of fruits such as date palm, ber, pomegranate, citrus, aonla, bael, grapes, guava and in vegetables such as cucurbitaceous crops, spices and some medicinal plants. The optimized technologies and inputs could increase the existing low productivity. It is now realized that there is a limited scope for quantum jump in fruit and vegetable production in the traditional production areas. The amelioration of the extreme conditions is also considered vital for life support to the inhabitants of this area. The recent awareness regarding the potential of these ecologically fragile lands for production of quality horticultural produce has not only opened up scope for providing economic sustenance for the people of this region, but also for bringing new areas to increase production through horticulture.

Introduction

While Indian agriculture has evolved to provide food to our ever growing population, nutrition security still remains a distant dream. Fruits an important component of a healthy diet, are rich source of nutraceuticals. Such health components comprising of flavonoides, carotenoides, vitamins, anthocyanins and other polyphenolics provide health benefits of disease prevention through antioxidant activity and reduced disease risks. Of late there has been an explosion of consumer interest in the health enhancing role of physiologically-active specific food components commonly referred to as nutraceuticals and functional foods.

The term ‘nutraceutical’ was first coined by an American doctor Stephen DeFelice in the 1990s. Today, healthcare market is flooded with different new nutraceutical related terminologies like, cosmeceuticals, biopharmaceuticals, herbaceuticals, ayuraceuticals, dermaceuticals, nutri-cosmetics etc. A review of 200 epidemiological studies showed that cancer risk in people consuming diets high in fruits was only one-half that in those consuming few of these foods. Increased acceptance and use of nutraceuticals and functional foods in the western world has resulted in increased export of such commodities from these countries. World-wide market for nutraceuticals and medicinal plant products today has surpassed US $ 15 billion with the top markets being United States (US $ 3 billion), Europe (US$ 2.4 billion), Japan (US$ 2.7 billion) and Asia (US$ 2.7 billion). It is increasing at the rate of 10% per annum. USA holds a significant share (35%) in world nutraceutical market followed by Japan (25%). As per the US estimates, the market for natural food colorants is estimated at US $ 500 million out of which anthocyanin and lutein together account for US $ 200 millions. Other large, emerging international markets in south and southeast Asia and mid-east gulf countries include UAE, Qatar, Oman and Kuwait. At present nutraceuticals and food supplement based functional foods account for trade worth US$ 170 billions and India’s share in this market is less than one per cent.

India is emerging as a major stakeholder in the global horticulture scenario accounting for 10.00 % of the world production of fruits. This has been made possible due to concerted efforts of scientists and progressive farming community. In recent years, there is considerable awareness about the nutritional security and food safety. Underutilized fruit trees not only provide nutrition and income security to the people but can also ameliorate the harsh environment of the semi-arid and arid region. Jamun has been named as diabetes fighter for its hypoglycemic (lowering blood sugar) properties.The minor fruits like bael, karonda, khirni, mahua, tamarind, mulberry, pilu, chironji, phalsa and wood apple have tremendous scope for their proper utilization. These fruits are nutritionally rich in bioactive compounds and some of these are of great medicinal value, processing quality and other uses. They have a growing demand in local as well as export market and for processing besides diversification in agriculture in the wake of global changes in weather conditions.

Introduction

During the last few decades, interest in Ethnobotany has evolved substantially world wide, particularly in India, Africa, Mexico, South America, and South-East Asia. Ethnobiological information on what and how local people make use of plants and animals have been traditionally gathered and passed on from generation to generation. India represents one of the greatest emporia of ethnobotanical wealth. Like other parts of India, in hot arid region also, rural and tribal communities have precious information about utilization of indigenous plants. Besides identification of plants as food, fodder, medicine etc., there also exists similar experience on life support species for exigencies like drought and famines, which is less utilized so far. Several researchers made contribution on etnobotanical aspects of Thar Desert. During 19^th century, King (1869 and 1870) listed wild plants used as food and vegetables during famine by people of Marwar region of Thar Desert. Afterwards, ethnobotanical aspects of edible plants of this region was attempted by several workers

Introduction

Several tropical indigenous fruits have still remained underexploited due to the lack of awareness of their potential, market demand and low and erratic bearing in many cases. Though wild and domesticated diversity is composed of nearly 3000 tropical fruit species, only a few are cultivated on large scale (Vietmeyer, 1990;Pareek et al., 1998). These species (approximately 600 tropical and subtropical) are better known in their areas of diversity and have not yet been utilized to their full potential inspite of their high economic value. There exists a very rich diversity of fruits across the tropical and sub-tropical regions of the world, with more than 500 species of fruits estimated to be found in Southeast Asia alone. The South and Southeast Asia represents above 300 species of native minor fruits (Arora, 1995). These species are being used by local people as minor fruits as well as for medicinal purposes as described in the Indian system of medicine. If properly harnessed, this diversity has great potential as a source of food besides meeting multipurpose needs of the local communities (Pareek et al., 1998).

Introduction

Fiber is that part of plant food which is not digested when eaten. Since it is not absorbed into the body, dietary fiber is not a nutrient. Nevertheless, fiber is a very important component of a healthy diet. Fiber, also called “roughage” helps prevent constipation, hemorrhoids and diverticular disease. Some types of fiber have a cholesterol-lowering effect, which could lead to reduced risk of heart disease.

Dietary fiber has been defined as plant cell wall material resistant to the intestinal secretions of the host. This definition gives the appearance of precision and allows gravimetric and chemical measurements. However, a proportion of other non-fibre dietary constituents (e.g, retrograded starch, protein, and fat) pass along the gut, without absorption or metabolism, to the caecum. Chemical analysis or quantitative measurements of the fibre content of specific diets do not allow prediction of their biological action. The physiological effects of dietary fibre depend predominantly on physical properties unrelated in any simple or direct way to chemical composition. Quantitative measurement of dietary fibre does not allow for diverse effects on nutrient absorption, sterol metabolism, fermentation in the colon, and stool weight. We still do not know whether to restrict the definition of “dietary fibre” to non-starch polysaccharides or to include related materials such as resistant starch, lignin, and the complex assemblies typical of plant tissues, where polysaccharides occur in close association with other molecules. An alternative to defining fibre in terms of chemical composition would be to develop measurements of physical properties relevant to physiological action in the intestine. This approach could be extended to other polymeric constituents, in particular proteins (ingested and secreted) and mucous glycoproteins.

Polysaccharides are the main constituents of dietary fibre and show a wide spectrum of physical, properties that reflect the nature and extent of intermolecular association. Dietary fibre can be likened to a water-laden hydrated mass passing along the gut. Physical properties that influence function are a combination of the rheological and colligative properties of the water-soluble fibre components, the surface characteristics of the water-insoluble components, and the network properties of the swollen hydrated components. Such features include viscosity, water holding, cation exchange, organic acid adsorption, gel filtration, and particle size distribution.

Introduction

Khejri (Prosopis cineraria) grows in dry and arid regions of Arabia and in regions of India mainly Rajasthan, Haryana, Punjab, Gujarat, Western Uttar Pradesh and drier parts of Deccan. The tree is locally known as Jandi or Khejri (India), Jand (Pakistan) and Ghaf (Arabic). It is the State tree of Rajasthan, India. Prosopis cineraria are small to medium size evergreen thorny tree. It is also known as “wonder tree” and “king of desert” as all the parts of tree are useful. The importance of the medicinal value of this tree has been highlighted in our ancient literature. The bark of the tree has abortifacient and laxative properties and is also used as a remedy for rheumatism in the central provinces. The leaves are of high nutritive value and locally called ‘’Loong’’. Leaf paste of P. cineraria is applied on boils and blisters, including mouth ulcers in livestock. The smoke of the leaves is considered good for eye troubles. Leaf extracts of P. cineraria have been reported to show antibacterial, antihyperglycemic, antihyperlipidemic and antioxidative activities . Pods are brown to chocolate in colour on ripening, each containing several seeds embedded in sweet dry yellow pulp. P. cineraria pods are locally called ‘’sangar’’ or ‘’sangri’’. The pod is considered astringent in Punjab. Sangri pods are known to prevent protein and mineral deficiency. Cooked pods of Khejri are used as a functional food in Rajasthan, for the amelioration of numerous illnesses. Pods of khejri have been studied for various phytochemicals like alkaloids, saponins, tannins, flavanoids, flavanols and total phenolics. As this plant is found in water stress (or deficient area) so antioxidant potential of pods has also been investigated. Acetone and methanol extracts of Sangri pods are the most potent bioactive extracts. Nutritional analysis shows it as a good source of proteins and minerals like calcium, sodium and potassium. This study demonstrates that P. cineraria pods may be employed as nutraceutical food with rich nutrition, disease prevention and health promoting effects.

The importance of air in human life is well known as air is required for running different biological processes in human body. Unfortunately, the same life giving air or oxygen can cause harmful side effects like generation of oxidants or free radicals in our body. Reactive oxygen species, by product of respirative cycle of oxidative phosphorylation, are well known to interfere with cytoplasmic function and bio-molecules and for inflicting damages on cellular bio-molecules, which pre-disposes cells to several anomalies like mutagenic aberration, cell ageing, diseases, cancerous tumour growth and development of various lethal diseases such as cardio-vascular diseases, cancer, atherosclerosis etc. (Gorinstein and others 2001; Apak and others 2004). Free radicals disrupt the proper membrane function, denature proteins and inhibit enzyme function. Antioxidants, naturally present in food, play a vital role in trapping the radicals and; therefore, effective in reducing the risk of heart diseases, immune system decline, different inflammatory reactions etc. (Silici and others 2010).

Free radicals are unstable because they are missing an electron and they try to become stable by attaching to cell membranes in the body, snatching away electrons from them. This, in turn, sets free radicle molecules on an electron snatching spree and starts a chain reaction that ultimately leads to cell death. On the other hand, antioxidants (such as carotenoids, anthocyanins, ascorbic acid, flavonols, flavonoids, polyphenols etc.), present in our foods can prevent or slow down the oxidative damage by donating one of their own electrons, ending the electron-stealing reaction. Epidemiological evidences suggests that intake of antioxidants helps in scavenging free radicals, cause of a broad spectrum damages to biological system (Vertuani and others 2002). This has led consumers to look for a diet, derived from natural sources as well as rich in antioxidants as an strategy to counteract the cellular damages wreak by oxidative stress.

Introduction

The mankind in the past two centuries has witnessed several technology revolutions: industrial, agricultural, medical, info-tech, biotech etc. Nanotechnology is recent one in the series. Nanotechnology is the manipulation or self-assembly of individual atoms, molecules, or molecular clusters into structures to create materials and devices with new or vastly different properties. It uses techniques, processes and materials at the supramolecular level, approximately in a range between 1-100 nanometres (nm), in order to create new properties and to stimulate particular desired functionalities. For the food industry, nanotechnology applications include: release systems for pesticides or fertilizers in agriculture; antibacterial or easy-to-clean surfaces in food processing machines; food additives such as anti-caking in salt, powders and coffee creamers; anti-foaming agents for beer; natural colour additives for beverages; encapsulated nutraceuticals(antioxidants, vitamins) for dietary supplements; and, micelle systems for low-fat foods. It is predicted that in the foreseeable future nanotechnology will transform the entire food industry, changing the way food is produced, processed, packaged, transported, and consumed. The word “nano,” derived from the Greek “nano” signifying “dwarf,” is becoming increasingly too vast in terms of its huge potential in agriculture, health and the environment. In the agricultural sector, nanotech research and development is likely to facilitate next stage of development of genetically modified crops, farm and animal protection and production inputs, food processing, nutraceuticals etc. India is bestowed with a variety of crops, vegetables, fruits, flowers but food sector is handicapped due to inefficiencies in production, processing, storage and packaging. Most of the processing and packaging in industry and agriculture leaves behind a trail of environmental hazards, which if not tackled at this juncture, will add to long term ecological problems.

Introduction

From centuries, mankind is totally dependent on plants as a source of carbohydrates, proteins and fats for their food & shelter. In addition, plants are valuable source of a wide range of metabolites, which are used as pharmaceuticals, agrochemicals, flavors, fragrances, colors, biopesticides and food additives. In 1985, 3500 new chemical structures have been identified and 2600 derived from the higher plants. Worldwide, 121 clinically useful prescription drugs are derived from plants. Even today, 75% of the world’s population relies on plants for traditional medicine. In the US, where chemical synthesis dominates the pharmaceutical industry, 25% of the pharmaceuticals are based on plant-derived chemicals.

Biotechnology offers an opportunity to exploit the cell, tissue, organ or entire organism by growing them in-vitro and to genetically manipulate them to get desired compounds. Since the world population is increasing rapidly, there is extreme pressure on the available cultivable land to produce food and fulfill the needs. Therefore, for other uses such as production of pharmaceuticals and chemicals from plants, the available land should be used effectively. Chemical engineers are currently developing improved and appropriate bioreactors for the improvement of production systems by adopting techniques of growth and metabolite production coupled with downstream processing of the products. The improvements in molecular biological research have given a new dimension to in-vitro culture as well as for plant improvement, enhancing the yields of the product and resulting in multiple products or producing novel products from genetically engineered plants. Moreover, the need for safer drugs without side effects has led to the use of natural ingredients with proven safety. These factors have laid emphasis on the use of biotechnological methods to enhance the production of pharmaceuticals and food additives in quality and quantity.

Plant in vitro cultures are able to produce and accumulate many medicinally valuable secondary metabolites. Antioxidants are an important group of medicinal preventive compounds as well as being food additives inhibiting detrimental changes of easily oxidizable nutrients. Many different in vitro approaches have been used for increased biosynthesis and the accumulation of antioxidant compounds in plant cells. Antioxidants are capable of stabilizing, or deactivating, free radicals before they attack cells. Antioxidants are absolutely critical for maintaining optimal cellular and systemic health and well-being. Antioxidants are gaining a lot of importance as a panacea for a large number of life-style diseases like aging, cancer, diabetes, cardiovascular and other degenerative diseases etc. The present lecture summarizes the achievements of in vitro technology for the production of antioxidants compounds. The focus will be on the major chemical classes of antioxidants and on the approaches used to improve the in vitro methods for producing these compounds.

Feed accounts for a major portion of farm expenses in livestock and poultry production. Thus, to obtain maximum profitability, it must be ensured that the feed should not only be well balanced nutritionally but economical too. Rising prices of feeds certainly have reduced the profitable nature of broiler farming. For better utilization of feed and to improve feed efficiency, antibiotics were used at sub-therapeutic levels in the animal ration.

Development of antibacterials progressed very quickly and as a result, certain new antibacterial substances were discovered and developed for use as growth promoting agents in livestock and poultry. The antibiotics act by reducing nutrient destruction in the intestine, increasing microbial synthesis of certain vitamins and amino acids, reducing the rate of passage of nutrients in the gastrointestinal tract and reducing the thickness of the intestinal wall. This thinner wall and reduced rate of passage have been suggested as factors favoring efficient absorption of nutrients. It is also reported that the antibiotics also inhibit the bacterial production of ammonia and other harmful nitrogenous compounds such as trimethylamine that reduce the growth of chickens.

Introduction

Organic seeds are produced by purchasing conventional non-treated seeds and growing them on organic plot / farm for one season without the use of any synthetic chemical. The seeds harvested are then sold on to organic farmers as organic seeds.

Over 98% of sprayed insecticides and 95% of herbicides reach a destination other than their target species, because they are sprayed or spread across entire agricultural fields. Runoff can carry pesticides into aquatic environments while wind can carry them to other fields, grazing areas, human settlements and undeveloped areas, potentially affecting other species. Other problems emerge from poor production, transport and storage practices.

Production of organic seeds without the use of pesticides like herbicides (weeds), insecticides (insects), fungicides (fungi), nematocides (nematodes), and rodenticides (vertebrate poisons) is a matter of skill and expertise. For this purpose, the seeds used for planting, the soil where they are planted, the water used for irrigation and even the air, need to be kept free of pesticides in order to prevent their contamination.

Seed

Fruits and vegetables are important part of our dietary, which are rich source of nutrient (carbohydrates, protein, fat, vitamins, minerals, and dietary fiber). Carbohydrates, protein and fat are macronutrients, considered as energy sources. Vitamins and minerals are micro nutrient, play important role in body building. Fibers have several direct and indirect advantages. ICMR, New Delhi recommends 125g of leafy vegetables, 100g of root and tuber vegetables and 75g of other vegetables (total 300g/day) and 85g of fruits per capita every day for balance diet.

Maturity

It is derived from Latin word ‘Maturus’ which means ripen. It is that stage of fruit development, which ensures attainment of maximum edible quality at the completion of ripening process.

Maturation

It is the developmental process by which the fruit attains maturity. It is the transient phase of development from near completion of physical growth to attainment of physiological maturity. There are different stages of maturation e.g. immature, mature, optimally mature, over mature.

Maturity Indices

The factors for determining the harvesting of horticulture commodities according to consumer purpose and type of commodity.

Maturity Indices is two type

Fruits and vegetables are living tissues subject to continuous change after harvest. Some changes are desirable from consumer point of view but most are not. Post-harvest changes in fresh fruit cannot be stopped, but these can be slowed down within certain limits to enhance the shelf life of fruits. The post-harvest handling plays an important role in extending the storage and marketable life of horticultural perishables.

Post Harvest Treat ment of Fruits and Vegetables Washing

It is useful in removing surface adhering material water. Mechanically, it is also accomplished by passing the fruits/vegetables through machine arranged with water tank equipped with rotating brush. In some produce washing improves appeal by facilitating removal of sap as case in mango, papaya, jackfruit, kronda, dirt in case of carrot, reddish, turnip, sugar beet, sweet potato, etc. and for removal of debris in case of banana. The water use for the purpose should be cleaned otherwise fungal and bacterial levels may build up. Disinfected treatment using ultraviolet light, ozone, chlorine (100 ppm), calcium hydroxide, etc. help to clean water for washing purpose.

Physiological disorders refer to non-parasitic or inanimate disease of fruit crops, or it is the breakdown of tissue that is not caused by either invasion by pathogens or by mechanical damage. They may develop in response to an adverse environment, especially temperature or to a nutritional deficiency during growth and development. Physiological disorder is broadly classified into two broad categories. They are:

Canning is a process of sealing food stuffs hermatically in containers and sterilizing them by heat for long storage is known as canning.

Principle of Canning

Destruction of spoilage organism within the sealed container by means of heat.

Selection of Fruit and Vegetable

For canning fruit should be ripe but firm and uniformity mature and vegetables except tomato should be tender.

Grading

Selected fruit and vegetable are graded according to size and colour to obtain uniform quality. This is done by hand or machines such as screw grader and roller grader.

Removal of water from the food by non-conventional energy source like sunlight, wind, and a smoky fire. Drying (dehydrating) food is one of the oldest and easiest methods of food preservation.

Dehydration

Dehydration is the process of removing water or moisture from a food product under controlled condition like temperature, relative humidity, air flow, etc.

Principles of Drying and Dehydration

Drying removes the moisture from the food so that bacteria, yeasts and moulds cannot grow and spoil the food. It also slows down the action of enzymes, but does not inactivate them. Dried food items can be kept almost indefinitely, as long as they are not rehydrated.

Fruit juices which do not undergo alcoholic fermentation are termed as unfermented beverages. They include natural and sweetened juices, RTS, nectar, cordial, squash, crush, syrup, fruit juice concentrate and fruit juice powder. Barley waters and carbonated beverages are also included in this group.