eChapters

Abstract

Consumer now-a-days relies on manufacturing and processing standards, particularly to know what ingredients are present, due to dietary, nutritional requirements, or medical conditions (e.g., diabetes orallergies). Modified PCR and combination of PCR with other analytical tools have been successfully used for analysis of various parameters related to functional foods such as detection and quantification of beneficial as well as food borne pathogenic microorganisms, food allergens, raw material source, bioactive compounds, genetically modified foods. Multiplex PCR method has been found to be an efficient tool for simple, rapid, and reliable identification of Lactobacillus and Bifidobacterium in probiotic products. Food allergens like gluten, peanut, hazelnut etc. could be easily detected in foods using PCR, even if present in small quantities. BOX-PCR and PCR-DGGE analysis have been used for identification of bacterial diversity of a naturally fermented functional food (Enzyme). HPLC combined with real time -PCR were successfully used to quantify and analyse compounds of secondary metabolites like phenylpropanoid amides, which represent an important class of nutraceutical having strong antioxidant and chemotherapeutic effects in various transgenic tomato tissues. Detection of active compounds in natural plant products were successfully achieved using PCR techniques. In general PCR have gained more importance as it has high sensitivity, improved precision, wide dynamic range for quantification, genotype based and is quick method of detection and quality control of foods than traditional culture based methods.

Abstract

Sedentary lifestyle coupled with excess calorie intake is partially responsible for increased incidence of lifestyle related diseases like coronary heart disease, obesity, diabetes, cancer and hypertension. Non-nutritive sweeteners can offer consumers a way to enjoy the sweet taste with little or no energy. Further, functional beverages are the drinks which are altered in such a way to provide specific health benefits and disease preventing properties beyond general nutrition. In the present paper, authors have summarized various research works on development of different low calorie functional fruit and vegetable products by replacing sugar with non-nutritive sweeteners like saccharin, cyclamate, sorbitol and stevioside at different levels of sweetness (equivalent used to sucrose). The cyclamate sweetened spiced plum squash at 50 per cent sweetness proportion gave higher taste scores in comparison to saccharin sweetened beverage. In case of sorbitol sweetened beverages, with the increase in the proportion of sorbitol sweetness, the organoleptic score for colour, body and flavour increased compared to saccharin and cyclamate sweetened products. Whereas, the stevia sweetened beverages indicated highest sensory acceptability at 75% stevioside sweetness level. Further, sorbitol sweetened health products were found to have similar calculated energy value as that of sucrose sweetened products (100%), but sorbitol is absorbed slowly and does not raise the insulin levels. The development efforts had successfully reduced calorie value of plum squash up to 42% with cyclamate at 50% sweetness level. The calorie value of the sorbitol and stevioside sweetened products has been reduced by 70% and 60% per serving at 100% and 75% sweetness level, respectively. The developed products were found to have strong antimicrobial activity against E. coli as well as high antioxidant potential. Overall, it was concluded that, the developed products had better taste, palatability and storage stability beside reduced energy value, hence their availability in the market will definitely benefit the at risk group i.e. diabetics, obese and health conscious people.

Abstract

The present study was conducted to develop ready to eat extruded snack food based on germinated flour of wheat, Bengal gram and green gram. A Central Composite Rotatable Design (CCRD) for five variables at five levels was used for experimental combinations and optimization of the process parameters. Experimental design with green gram flour (5 to 20%) and bengal gram flour (1535%) in wheat flour, moisture content (14-18%), screw speed (200-300 rpm) and barrel temperature (126-134°C) as independent variables having 32 different combinations of snack formulations that were studied using response surface methodology to investigate the effect of these variables on product responses (Lateral expansion, bulk density, Water absorption index, water solubility index and sensory characteristics). Sensory analysis was carried out of all extrudates for texture, color and overall acceptability. Multiple regression equations were obtained to describe the effects of each variable on product responses. The optimum operating conditions for development of germinated wheat, green gram and Bengal gram flour extrudate were 132°C of barrel temperature, 275 rpm of screw speed, 17 % offeed moisture, 6.5% of green gram flour and 23.1% of Bengal gram flour. The responses predicted by the software for these optimum process conditions resulted lateral expansion of 169.59%, bulk density, 0.263g/cm³; water solubility index, 19.08; water absoption index, 13.88g/g; and overall acceptability value of 7.38.

Abstract

The concern of consumers for convenience and healthy foods involves many parameters like functional and nutraceutical properties, ease to prepare, good quality, economics as well as good nutritional profile of the food. This trend of convenience has been increasing in today's world because of the societal changes like the aging of population, the increasing entry of women into the labor force, the change to a multi-cultured society and the increasing polarization between poor and rich. Value addition to the traditional sources is a medium to bring variety products into the market. Cereal starches possess a wide application in the food industry as an additive but the native starch is not widely used in food industry due to its poor functional properties. Pregelatinized starches and flours have become important in processed foods because the functional properties of the starches and flours are improved over the native starches and cereal flours. Modification is a process which alters the structure of the starch in the wheat endosperm by affecting the hydrogen bonds in a controllable manner. Modification of starch and flours is generally done by several methods such as chemical degradation, physical alteration or enzymatic transformation. The primary objective of modification is to reduce the hot viscosity of the starch paste so that higher concentrations of starch can be dispersed without excessive thickening. The pregelatinized flours offer a tremendous number of functional benefits to variety of foods such as bakeries, snacks, beverages as well as nutritional foods. The various functional benefits of pre-gelatinized starch/flour as an additive are classified as fat replacer, texture improver, stabilizer, emulsifier, thickening agent and for freeze-thaw stability. Keywords: Pregelatinization, modification, functionality, cereal flour.

Abstract

The aim of this work was to reduce the natural fermentation period of ‘idli’ from the conventional 14 hr to10 hr by adding underutilized okara for the preparation of ‘idli’. Black gram was partially substituted with soy residue okara in the ratio of (1:1). After 14 hr of natural fermentation, the pH and total acidity of control ‘idli’ batter was 4.55 and 0.68% and that of okara fortified ‘idli’ batter was 4.57 and 0.56%, respectively. The amount of CO₂ released by the control and okara fortified batter was 12.5% and 22.5% respectively. The viable count of yeast and mold, lactics and mesophilic bacteria in control and okara batter increased with time reaching 8.4 and 9.6, 8.2 and 7.5, and 8.6 and 9.2 log10 cfu/g, respectively at the end of 10 hr of natural fermentation. Okara fortified ‘idli’ was soft and spongy compared to control ‘idli’.

Abstract

Rice is the most produced and consumed source of stable food in J andK, and is excellent in genetic diversity. Rice production is the principal activity and a major source of income for the State. Traditional rice varieties have an enhancing potential in wide range of nutraceutical and functional foods. Besides possessing medicinal and nutritional properties, the by-products generated from these rice varieties in various post harvest operations are equally valuable. Traditional healers and local farmers have been using these traditional varieties in ayurveda and in curing of various kinds of ailments, such as cooling the body in ayurvedic treatments, improving vocal clarity, curing of boils, swellings and skin blemishes. Extracts of brown rice are also used as energy drink in individuals, patients and in treatment of chronic gastric problems, jaundice, dysenteric complaints and to increase lactation and nutrition to Childs. Sticky glutinous rice has been reported in treatment of stomach upsets, nausea, heart-burn and indigestion. Brown rice extracts have been reported in treatments of breast and stomach cancer and warts.

Abstract

The amaranth as a pseudocereal has shown its role in the development and diversification of agricultural products and food which is a priority trend for world agriculture. The amaranth has excellent nutrient profile and technological advantage in various food formulations in comparison to other conventional cereals. Recently, current interest in amaranth also resides in the fact that it has a great amount of genetic diversity, phenotypic plasticity and is extremely adaptable to adverse growing conditions, resists heat and drought, has no major disease problem. This crop is among the easiest of plants to grow in agriculturally marginal lands in hilly area. Moreover, these contain significant amount of bioactive components such as phytosterols, squalene and polyphenols along with good amount of micronutrients such as minerals and vitamins. Amaranth consumption has been shown to improve plasma lipid profile in animals. Methanolic extracts of amaranth have demonstrated anti-hyperlipidemic,anti-diarrheic, anti-fungal and anti-malarial properties. Specific polyphenols such as rutin, isoquercetin and nicotiflorin and phenolic acids and amides with antioxidant activity have been found in amaranth seeds. In addition to above, amaranth, seeds are gluten free and thus they are currently emerging as healthy alternatives to gluten containing grains in gluten free diet for celiac people.

Abstract

Prebiotics are the non-digestible food ingredients that beneficially affect the host by selectively stimulating the growth and/or activity of one or limited number of bacteria in the colon. These are heat resistant components which remain intact during the baking process; this allows prebiotics to be incorporated into every day food choices. Consumption of non-digestible ingredients allows the growth ofbio cultures by reaching the intestine unaffected by the digestion process resulting in improvement of digestive health. Prebiotics reach the intestine in an unaltered form and shows the prebiotic effect when there is an increase in the activity of healthy bacteria in the human intestine. The prebiotics stimulate the growth of healthy bacteria such as bifidobacteria and lactobacilli in the gut and increase resistance to invading pathogens. Functional foods increase consumer choice by adding prebiotics to every day food items such as cereals, biscuits, breads, table spreads, drinks, and yoghurts. By continuing to eat and drink common foods, but choosing functional alternatives (such as bread containing prebiotics) dietary requirements can be met, without significant changes to foodpreferences. Some common example of cereal based products containing prebiotics are oat-based prebiotic drink, Breakstone's and Knudsen live active cottage cheese, prebiotic yogurt- Attune and Muller vitality, multi-fruit drink enrich and flavoured water enrich, prebiotic flavoured water, prebiotic capsules, dried fruit bars, prebiotic powder- Biocare fructo-oligosaccharides, Newtree purplaisir chocolate spread. The claims are constipation relief, suppression of diarrhea and reduction of the risks of osteoporosis, atherosclerotic cardiovascular disease associated with dyslipidemia and insulin resistance, obesity and possibly Type-2 diabetes. At present, claims about reduction of disease risk are only tentative and further research is needed.

Abstract

Demand for starch is increasing day by day and is met by restricted range of crops. In recent years, substantial progress has been made in obtaining starch from non-conventional sources such as sweet potato, buckwheat, sago, water chestnut, which can be used as a substitute for conventional sources. So it is necessary to search for other underutilized and nonconventional sources of starch to meet the increased demand. Typha angustifolia, an aquatic weed containing appreciable amount of starch in its rhizome and roots, can be used for starch isolation to make its use in food and non-food derivatives. In many parts of the world, starch-rich roots of Typha angustifolia are eaten raw or boiled or dried roots are pulverized into a powder, and then, used as a thickener in soups or added to cereal flours to make biscuits and bread.

Abstract

Noodles are widely consumed throughout the world and their global consumption is second only to bread. In the study, response of reducing agents (cysteine hydrochloride and sodium metabisulphite) and oxidizing agents (potassium bromate and benzoyl peroxide) at 10 and 20 ppm levels on the farinographic and amylographic curve characteristics as well as on the noodle making properties of durum and commercial wheat semolina were investigated according to the AACC (1990) procedure. The farinographic curve characteristics revealed that water absorption was enhanced with increasing levels of reducing agents but decreased with addition of oxidizing agents. However there was no significant change in Dough Development Time in case of durum semolina on addition of reducing agents, but commercial semolina recorded significant changes at 20 ppm level of reducing agent. The best reducing agent for durum and commercial semolina was thus sodium metabisulphite and cysteine hydrochloride respectively. Addition of oxidizing agent potassium bromate at 20 ppm level enhanced stability and was thus chosen as the best oxidizing agent for durum semolina and benzoyl peroxide for commercial semolina. Addition of reducing and oxidizing agents improved yield, appearance, elasticity and extensibility characteristics of instant fresh noodles. The best levels were used in the preparation of noodles on the Italian extruder (NAMAD).

Abstract

In the present study, a novel work on comparison of physico-chemical characterization and bacterial diversity of wheat straw compost and vermicomposting has been initiated in the tropical region. Wheat straw compost shows lesser pH, EC, TDS, Organic Carbon, Total Nitrogen and Total Phosphorus than vermicompost whereas there was an increase in Total Nitrogen, Total Phosphorus and Electrical Conductivity and a drop in the pH, TDS and Organic Carbon of the vermicompost as the composting progressed from 0, 3, 10, 17, 24 and 31 days. Strains of Bacillus spp. and Thermoactinomycetes were screened from the wheat straw compost, which are ecologically important and have commercial potential for enzyme production. These strains were able to degrade cellulose, hemicellulose and lignin and exhibited cellulase activity. Enterobacter aerogenes, Micrococcus luteus and E.coli were isolated from the gut of Eudrilis eugeniae which help in the transformation of biodegradable waste materials into valuable compost.

Abstract

Quinoa is a pseudo-cereal which belongs to family Chenopodiaceae. Quinoa can act as highly potential crop for areas where ecological conditions do not support other food crops because of its rusticity, tolerance to frost, salinity, drought and ability to grow in marginal soils. Recently, much attention is focused on quinoa for people with celiac disease and allergic to gluten. Quinoa contains high-quality protein, complete with all essential amino acids and is a good source of carbohydrates, lipids, vitamin C, vitamin E (natural antioxidants) and adequate amount of important micronutrients such as minerals. Carbohydrates of quinoa possess excellentfreeze-thaw stability and can be used as thickener in frozen foods.

Quinoa also consists of bioactive components such as phytosterols, squalene, fagopyritols and polyphenols which act as powerful anti-oxidants in-vitro and thus couldprevent degenerative diseases such as coronary heart disease, atherosclerosis and Alzheimer's disease. Fibre accounts for 6% of the grains total weight, and quinoa intake therefore promotes intestinal transit, regulates cholesterol, stimulates the development of beneficial bacterial flora and helps prevent colon cancer. The quinoa grain can be used to combat liver disease, angina and cystitis. The radical scavenging ability and Angiotensin I converting enzyme (ACE) inhibition activity of quinoa is higher than that of amaranth, rice and wheat. Recent studies have identified significant amounts of ecdysteroids, kaempferol, quercetin, two phytoestrogen - daidzein and cenistema in quinoa. Ethanolic extract of quinoa was observed to have Antioxidant and antihypertensive activity.

Abstract

Seaweeds are the large marine algae that grow almost exclusively in the shallow waters at the edge of the oceans. Seaweeds are rich sources of many bioactive compounds and nutraceuticals. These factors are considered under two categories: Seaweed phytochemicals and Seaweed polysaccharides. They are rich in soluble dietary fibers, proteins, minerals, vitamins, antioxidants, phytochemicals, and polyunsaturated fatty acids, with low caloric value. The red, brown and green seaweeds have been shown to have therapeutic properties for health and disease management. Usually they are only used as gelling agent and stabilizers in the food and pharmaceutical industries, but current research has revealed their potential medicinal uses against many diseases like cancer, allergy, diabetes, oxidative stress, inflammation, thrombosis, obesity, hypertensive and other degenerative ailments. In line with other natural foods like fruits, vegetables and grains, there has been marked interest within the scientific community to assess which fractions of seaweeds may be linked to the historically observed health benefits. As consumer health and nutrition become more influential in the food industry, the use of seaweed as an ingredient is on the rise in product development. For several centuries there has been a traditional use of seaweeds as food in China, Japan and the Republic of Korea. This review undertakes successful exploration of potential of seaweed gums as an functional ingredient in a number of food applications. This addition has the potential to enhance the nutritional quality of a product and hence human health.

Abstract

Microencapsulation has found great applications in food business. However, the technology remains aloof from being fully exploited. Microcapsules offer food processors a way to shield sensitive food ingredients, mask or preserve flavours and aromas and conversion of volatile food components into easy-handled solid ingredients (like powders, capsules etc). A number of naturally occurring and synthetic polymeric materials have been identified so far that possess the entrapping property and are categorised as GRAS materials. Numerous techniques have been developed for using these entrapping materials to encapsulate the sensitive food ingredients. Controlled release of the food ingredients at proper place and right time could be therefore a key practicality that may be provided by microencapsulation. With strictly fine-tuned and stabilized release characteristic, this method adds worth to the merchandise. The areas of interest in this field include the development of alternative and inexpensive polymers that may be considered natural or mimic the properties of natural polymeric materials, like Gum Arabic, Gellan Gum, Gum Karaya, Gaur Gum and Gum Acacia. Limitations in many of the encapsulation techniques have occurred due to high value of raw materials and production. This review is effectively committed to the, properties of encapsulating agents along with the emphasis on different techniques used for encapsulation in the varied fields like food technology, pharmaceutical, commercial engineering and biotechnology.

Abstract

This review presents an idea on the botanical description, medicinal properties and traditional usage of wild, edible and aromatic plant (Nymphaea alba) in the human nutrition. Nymphaea alba Lin, also known as the White Water lily, White Lotus, or Nenuphar is an aquatic flowering plant of the family Nymphaeaceae. Nymphaea is a weed in India and its production pretty much as good as water chest nut and Nelumbo nucifera. Its rhizome is rich in tannic acid, gallic acid, alkaloids, sterols, flavonoids, glycosides, hydrolysable tannins and high-molecular-weight polyphenolic compounds. It is used as associate aphrodisiac, anodyne, antiscrophulatic, astringent, cardiotonic, demulcent, sedative and antiinflammatory. Further, it conjointly produces calming and sedative effects upon the nervous system, and is beneficial within the treatment of sleep disorder, anxiety and similar disorders. Moreover, the content of starch in the rhizome is said to be 40%. Extensive work has been carried out on agronomic and phenotypic properties for most plants, but relatively little study has been carried out on the properties which are of direct technical and economic interest to competitive food and nonfood industry. Non-conventional food resources and their value addition have attracted attention in the recent yearsfor their potential use as functional ingredients in food formulations, besides food they have also been used for non-food applications. Moreover, Plants provide the predominant ingredients of medicines in most medical traditions. So, there is tremendous potential for the profitable industrial use of these medicinal plants and exploring them for further use. Keywords: Non-conventional food resources, Nymphaea alba, Rhizome.

Abstract

Mango pulp is high in prebiotic dietary fibers vitamin c, polyphenols, carotenoids, vitamins and dietary minerals. Mint leaves are known for its medicinal aromatic and flavorsome qualities. Mint act as powerful antioxidant, protecting the body against the formation of cancerous cells and is rich source of polyphenolic compounds. Tulsi also have antioxidant, adaptogenic, anti-inflammatory, antibacterial and immune-enhancing properties. Honey is natural sweetener and has antiseptic and antibacterial properties. Medicinally, honey is non irritant promote rapid growth of healthy tissue and is useful in purities value, bed spores, skin and intestinal disorder, etc. Keeping in mind the beneficial effects of these raw materials, attempt was made to prepare value added drink from it, which may have medicinal value and good sensory acceptability with objective to prepare and evaluate the recipe for value added green mango-mint-tulsi beverage and to study the shelf life of the developed value added beverage. The formulation prepared with partial substitution of honey was more acceptable. Throughout the storage period, the squash prepared with honey scored more in flavor, taste, mouth-feel and overall acceptability than without honey. The cost of production without including labour, bottling and other overhead charges came out to be Rs. 34.5/L for squash without honey and Rs. 59.0/L for squash without honey.

Abstract

Starch is a naturally occurring biodegradable polymer and readily available from agriculture. It is widely used in food and non-food applications and isolated from crops such as maize, potatoes, tapioca, rice and wheat. However, in recent years substantial progress has been made on the molecular structure of cereal and tuber starches and their impact on functionality, the following is a subjective summary that presents status of knowledge on isolation of starch from non-conventional source like Acorus calamus (sweet flag). The focus is on potential application of the source as food and non-food derivatives. Extensive work has been carried out on agronomic and phenotypic properties for most tropical crops, but relatively little study has been carried out on the properties which are of direct technical and economic interest to competitive food and non-food industry. Sweet flag (Acorus calamus L.) is an emergent macrophyte, originating in Asia, commonly found in European wetlands. Rhizome is the most important storage organ in Acorus. It contains considerable amounts of carbohydrates and nitrogen-rich compound. This species is growing to 6 feet, with long lanceolate leaves %-inch wide with pronounced midrib, aromatic, with stout rhizomes. The major proportion of total non-structural carbohydrates in rhizomes is starch (91-93% and 51-64% in rhizomes and roots, respectively). However, amount of starch varies among the organs as well. Rhizomes contain the highest amount of starch followed by branched roots and finally by unbranched roots. Rhizomes comprises single to compound grains, with clusters present in high frequencies. Non-conventional food resources and their value addition have attracted attention in the recent years for their potential use as functional ingredients in food formulations, besides food they have also been used for non-food applications. So there is tremendous potential for the profitable commercial use of these tropical starches and exploring them for further use.

Abstract

Pomegranates are usually consumed as fresh fruit, with only a limited quantity being processed into products like juice, syrup, beverages, wine, confectionary and anardana. The special structure of fruit is one of main factors which limit its industrial processing. Knowing the importance of health benefits of pomegranate and all related aspects, the present study was carried out in order to utilize pomegranate fruit for preparation of pomegranate mouth freshener. Arils of two cultivars like Ganesh and Araktaweredried by two drying methods viz., sun drying (SD) and cabinet drying (CD).Nutritive and palatable mouth freshener was prepared from anardana of two different cultivars as Ganesh (G) and Arakta (A). Production cost of 100g pomegranate mouth freshener is about Rs.55/. It was noticed that moisture content, acidity and ascorbic acid content decreased at the end of storage.

Abstract

Due to rapidly increasing knowledge on nutrition and medicine, concepts about food and health has dramatically changed and resulted in consumption of nutraceuticals and natural plant foods.Use of nutritional therapy and phytotherapy have become progressively popular to improve health, and to prevent and treat diseases. Plants have long history of their uses as ingredients of human nutrition and folk medicine,because of availability of huge array of high-value components and multiple-activity bio-actives. “Licorice” means “sweet root” in Greek is a plant of ancient origin, indigenous to Southern Europe and Asia Minor. Most of the supply comes from former USSR, Spain, Turkey, Syria, Iraq and Afghanistan, with total production between 40,000 and 50,000 tonnes per annum. The chemical constituents of the roots include several bioactive compounds, such as glycyrrhizin (~16%), different sugars (up to 18%) ,flavonoids, saponoids,sterols, starches, amino acids, gums and essential oils. A large number of clinical and experimental studies reported its useful biological properties such as antioxidant, immunomodulatory, cardioprotective, anti-inflammatory, anti-viral and anticancer effects. It is useful in anaemia, gout, asthama,ulcers, sore throat, tonsillitis, diabetes, tuberculosis, flatulence, diarrhea, sexual debility, epilepsy, hyperdypsia, fever, coughs, skin diseases, eye diseases, swellings,constipation, rheumatism, acidity, leucorrhoea, bleeding, jaundice, hiccough, hoarseness, bronchitis.Recently, it is reported to have neurological properties such as antidepressant, anxiolytic, and anticonvulsant effects. The most abundant minerals present are calcium, sodium, phosphorus, potassium and iron. Licorice extracts and its principle component, glycyrrhizin, have extensive use in foods,as a natural sweetener and flavoring agent in beverage, confectionery, tobacco and pharmaceutical industry. It is in great demand globally as medicinal and nutritional supplement due to it's wide range of properties, which also indicates that in future the plant could serve as a “lead” for the development of novel agents having good efficacy in various disorders.

Abstract

Kulfi is a mixture of fat; sugar and milk solid not fat together with added flavour. So diabetics people on restricted diets cannot consume kulfi having normal ingredients. Now-a-days, consumers demand for low fat/calorie products has significantly raised in an attempt to limit health problems, to lose or stabilize their weight and to work within the frame of a healthier diet. The role of fat replacers and sugar substitutes in the successful manufacture of these products is crucial. Development of sugar free kulfi would certainly ensure diabetic/obese people to enjoy ice cream/ kulfi. The current study is to standardize the kulfi recipe with fat and calorie replacer. Basic formula mix consist of Whole milk 60 percent, SMP 12 percent, Sugar 13 percent, Cream 15 percent and Stabilizer 0.5 percent where the whole milk was replaced by skim milk, cream and sugar was replaced by maltodextrin as a bulking agent and aspartame respectively alongwith sodium alginate as a stabilizer. The replacers were incorporated at four different levels of 0, 25, 50, 75 and 100 percent to the basic formula mix. Freezing of above kulfi mix was done by traditional method and softy freezer method. Sensory evaluation was carried out by using 9-point hedonic scale through semi-trained judges and results were statistically analyzed. On the basis of sensory scores it was revealed that sugar could be replaced 100% by artificial sweetener, bulking agent (Maltodextrin). It was found from the sensory scores that the milk fat in kulfi can be replaced upto 75 percent by sodium caseinate thereafter increase in caseinate gives prominent flavour of casein and kulfi body becomes thick and hard. It was concluded from the results that 100 percent sugar replacement was found feasible in preparation of low fat and low calorie kulfi. Results of the low fat and low calorie kulfi mix indicated that there was 32.29 percent reduction in the calorific value of experimental kulfi as compared to the control sample (traditional). It was concluded from the results that the kulfi with 75 percent less fat and 100 percent sugar free can be prepared with low cost in comparison with control.

Abstract

India has got a pool of medicinal herbs which are proved to be beneficial in curing various diseases. Their regular consumption not only will improve the health status but also reduce risk of lifestyle diseases. Though simple solutions, associated colloids, suspensions and emulsions are some of the traditional techniques for encapsulating functional agents, micro-encapsulation techniques is the most successfully employed technique for the controlled release of sensitive bioactive compounds. Owing to the targeted delivery of functional components directly to the human gut system, emulsion based delivery system are getting more attention now-a-days. With advancement in science, more complex and novel structures can be created which can successfully deliver these nutraceutical and bioactive ingredients into existing food systems. The technological interventions in emulsion science have opened great opportunities to improve the delivery of bioactive herbal components into milk and milk products. Various milk and milk products functionality can be improved in this way which will improve the gut- microflora within short period of time after consumption.

Abstract

A functional food is defined as food that provides health benefit beyond the basic nutrition. Such foods reduce risk of high blood pressure, coronary heart disease, osteoporosis, cancer and dental caries. Consumers’ increasing interest for maintaining or improving their health by eating specific food items has led to the development of many new functional foods including dairy products. These functional dairy foods contain some functional ingredients that decrease the absorption of cholesterol, reduce blood pressure and play role in regulation of satiety and have antimicrobial effects. Milk is a good source of fat, protein and minerals. It also contains several intrinsic functional components like melatonin, conjugated linoleic acid etc. in amounts lower than the body requirements. Fermented dairy products contain probiotics with special health benefits. Functional dairy foods could be produced with the addition and/or generation of functional components. Some examples include milk, yogurts and cheese enriched with conjugated linoleic acid or plant stanols/sterols to help reduce the risk of heart disease. Fermented dairy foods possess various nutritional and therapeutic properties. Lactic acid bacteria (LAB) play a major role in determining the positive health effects of fermented milks and related products. Dairy products with probiotics and prebiotics enhance digestive health, prevent colon cancer, help in lowering blood pressure and improve immune functions. Melatonin is important in curing of sleep disturbance and enhancement of alertness. Milk derived peptides have immunological, antimicrobial, ACE-inhibitory activity/antihypertensive, anti-carcinogenic and antioxidant activity. The aspects of functional dairy foods will be presented in detail.

Abstract

Functional foods and nutraceuticals are one of the fastest-growing segments of the food industry. The demand for these foods is driven by health conscious consumer and the growing awareness of the close connection between diet and health, particularly in relation to chronic diseases. Over the past five years (20082012), the Indian Nutraceuticals Market has been growing at a rapid pace and is expected to rise to US $ 5 billion by 2015. The rapid growth and development of this new industry combined with the need to protect consumer health and interests, has led to the evolution of a myriad of different regulatory frameworks and policies across multiple markets. Japan was one of the first countries to recognize a different category of healthier food products. The Japanese government formally accepted this category in the 1980s. Other developed countries viz. The EU, The US, Canada etc also regulated this sector during 1990s. In India, the Food Safety and Standards Act 2006 (FSSA) was enacted in 2006 in response to pressure from stakeholders and the food industry, transforming the regulation of food in India. Punjab state, with abundance of food grains and increasing trends in fruits and vegetables, provides options for both the producer and growth promotion in the nutraceuticals sector through partenship between research centers, private entrepreneurs and indigenous communities. Regulatory frameworks should focus on the protection of consumers, promotion of fair trade and innovation in the sector. This paper discusses functional foods and nutraceuticals as per food regulations prevalent in various countries and highlights how these regulatory frameworks play a major role in transforming the food sector.

Abstract

The use of biosensors is growing in the food industry as a means to ensure food safety and quality because of its versatility in determining biological compounds. It is defined as analytical technique used for detection of analyte that combines a biological component with a physico-chemical detector. The most important contribution of biosensors in the food sectors is to control production processes and ensure food quality and safety by reliable, fast and cost effective procedures. Biosensors have been useful for the evaluation of food composition, particularly in functional food products fortified with phytochemicals, vitamins and minerals.. Biosensors are replacing conventional analytical tools since they offer advantages in size, cost, specificity, rapid response, precision and sensitivity. Future progress in the biosensor technology involves the development of nutraceutical release technology within packaging material where it can be used to trigger the controllable release of bioactive components and targeted delivery of protective agents into the food product. The growing consumer demands for safe and quality food has led the food industries to search for quick and reliable methods for which the applications of the biosensor technique in the field of food processing and quality control are found to be promising.

Abstract

Vitamin D or “sunshine vitamin” is an essential fat soluble vitamin required for healthy bones. It is responsible for enhancing intestinal absorption of calcium and phosphate. Its deficiency leads to osteoporosis and osteomalacia in adults and rickets and other bone deformities in children. Vitamin D deficiency is being reported to be quite common these days due to modernization accompanied with changes in lifestyle and environmental pollution which limit sun exposure for several individuals. Inadequate sun exposure results in reduced vitamin D synthesis and ultimately poor vitamin D status necessitating compensation through dietary intake. Dietary vitamin D intake is very low in India because of low consumption of vitamin D rich foods, absence of fortification and little use of supplements. It is becoming a major public health problem, needing immediate attention. Fortification of milk and milk products is the safe and effective approach to deal with widespread vitamin D deficiency as milk is consumed and liked equally by all age groups. This paper highlights the importance, sources, recommended allowances and other relevant issues related to vitamin D fortification and its health effects.

ABSTRACT

Multispectral imagery has been used as the data source for natural resource mapping and land observational remote sensing from airborne and satellite systems since the early 1960s. Over the past two decades, advances in sensor technology have made it possible for the collection of several hundred spectral bands. This is commonly refe rred to as hyperspectral imagery. Thus it is possible to construct a complete reflectance spectrum of every pixel in the scene. This review highlights the hyperspectral remote sensing system development, hyper spectral data processing and difference between multispectral and hyperspectral data; spatial and spectral resolutions and focuses on the application of hyperspectral imagery in natural resource studies and, in particular the classification and mapping of land resources.

ABSTRACT

Remote sensing has undergone tremendous development in past decades. Hyperspectral imaging refers to the imaging of a scene over a large number of discrete, narrow contiguous spectral bands in the visible through thermal infrared portion of the spectrum. Thus it is possible to construct a complete reflectance spectrum of every pixel in the scene.

Classification of hyperspectral image requires thorough understanding of surface material properties, sensor characteristics and atmospheric absorption spectra. The reflectance spectra of most materials on the Earth's surface contain diagnostic absorption features. Remote sensors, capable of acquiring complete reflectance spectra over large areas, offer a powerful tool to study of the Earth and the environment. Methods are being developed to extract information from remote sensing data using image-processing approaches. Specific absorption features of reflectance spectrum can be used to identify a number of important rock forming minerals, and have been used by geologists for geologic mapping and studies of volcanoes.

The present discussion includes an application of thermal characteristics of near- IR bands of Landsat TM to estimate the temperature of over and around the crater of Barren Island volcano in 1991. A method using dual band temperature characteristics related to radiant source of sub-pixel size was developed and utilized to prepare temperature contour map of the Island using unsaturated pixels of band 5 and 7.

ABSTRACT

Over the last decade, hyperspectral remote sensing has become a powerful analysis tool for applications in environment and ecology, aquaculture, forestry, agriculture, and geoscience. A hyperspectral imagers advantage over broadband sensors, such as Landsat Thematic Mapper (TM) and the SPOT Haute Resolution Visible (HRV) sensor series, is its ability to detect molecular absorption and particle scattering signatures of constituents. The finer spectral resolution of a hyperspectral imager allows detection of surface materials and their abundances, as well as inferences of biological and chemical processes. This review highlights the vast extent to which hyperspectral technology and their application with special reference to ocean have been discussed.

ABSTRACT

This paper reviews the various application of hyperspectral remote sensing data carried out by the scientists of India emphasizing its advantages.

1. INTRODUCTION

The most significant recent breakthrough in remote sensing has been the development of hyperspectral sensors. The ‘Hyper’ in hyperspectral means ‘too many’ and refers to the large number of measured wavelength bands. Hyperspectral images are spectrally over determined, which means that they provide ample spectral information to identify and distinguish spectrally unique materials. Hyperspectral imagery provides the potential for more accurate and detailed information, extraction than is possible with any other type of conventional remotely sensed data.

Imaging spectroscopy (Goetz et al., 1985) in hyperspectral imaging is concerned with the measurement, analysis, and interpretation of spectra acquired from a given scene (or specific object) at a short, medium or long distance by an airborne or satellite sensor. The concept of imaging spectroscopy originated in the 1980's, when A. F. H. Goetz and his colleagues at NASA's Jet Propulsion Laboratory began a revolution in remote sensing by developing new instruments such as the Airborne Imaging Spectrometer (AIS), then called AVIRIS, for Airborne Visible Infra-Red Imaging Spectrometer (Green et al., 1998). This system is now able to cover the wavelength region from 0.4 to 2.5 μm using more than two hundred spectral channels, at nominal spectral resolution of 10 nm. The special characteristics of hyperspectral datasets pose different processing problems, which must be necessarily tackled under specific mathematical formalisms, such as classification and segmentation (Jia et al., 1999, Green, R 1998) and spectral mixture analysis (Adams et al., 1986; Smith et al., 1990a, b).

ABSTRACT

Mineral composition and their distribution on planetary surfaces provides important clues to the evolutionary processes that the planetary bodies have undergone since their formation. For distant and inaccessible planets, remote sensing, either from Earth-based telescopes or from an orbiter around the planetary body, using reflectance spectroscopy over a wide range of the electromagnetic spectrum (UV-Visible-IR), can provide surface distribution of minerals. With advances in technology, a high-resolution hyperspectral imager onboard an orbiter has developed into a powerful tool for compositional mapping of planetary surfaces. Interpretation of the signals from these distant and relatively unknown destinations is a challenging task due to scarcity of available ground truth. Here, we describe the technique with its applicability to airless bodies, such as Moon, in the context of the Indian Moon mission, Chandrayaan-1, and, the intricacies involved in the data analyses.

Keywords : Reflectance spectroscopy, hyperspectral data, remote sensing, planets, moon

1. INTRODUCTION

The primary goal of planetary exploration is to understand the mechanism by which planetary objects (planets, dwarf planets, satellites and small solar system bodies) have evolved with time. The information gathered from the study of individual bodies is integrated to comprehend the development of our solar system. The present understanding envisages our solar system to have formed from the solar nebula, produced as a consequence of the collapse of a molecular cloud. While the central mass gravitated and formed the sun, the gas and dust surrounding it condensed to form grains and formed the proto-planetary disk. These grains, through a series of processes, finally aggregated to form of the various planetary bodies. Existing Astronomical, chemical and mineralogical evidences from studies of lunar samples, meteorites and, remote sensing observations suggest that the planetary bodies are heterogeneous and possess extreme compositional and morphological diversity. The internal energy of a planetary body, a function of its size, is responsible for the differences in the degree of differentiation a body has undergone leading to the variations in their surface composition. Large planets like the Earth and Venus are still evolving whereas the small asteroids have barely evolved after their formation and are considered primitive. The wide variety of planetary bodies in our solar system is therefore reminiscent of the various stages of evolution that our solar system went through. The degree of melting and cycling through episodes of differentiation determine the mineral inventory on a planetary body. Therefore, distribution and composition of various minerals can be used to understand various stages of chemical evolution of a planetary body. Mineral mapping of planetary surfaces is thus useful in understanding the petrogenetic history.

ABSTRACT

Spectral signatures are the specific combination of reflected and absorbed electromagnetic radiation at varying wavelengths which can uniquely identify an object. The “Spectral signature” of an object is a function of 1) incidental EM wavelength and material interaction with that section of the electromagnetic spectrum. The measurements can be made with various instruments, including a task specific spectrometer, although the most common method is separation of the Red, Green, Blue and Near Infrared portion of the EM spectrum as acquired by digital cameras. The spectral signatures serve as diagnostic tools in understanding the composition and structure of the materials. The present paper highlights the usefulness of the spectral signatures in rock and mineral discrimination and mineral exploration and stresses the need for creation of a spectral data base in India for various applications.

1. INTRODUCTION

Objects at the Earth's surface emit and reflect many wavelengths of radiation. In principle, each object has a unique spectral signature, which could be used for identification much like a finger print. Remotely sensed spectral signatures could be utilized for recognizing and mapping for all kinds of features. This can be done to a limited extent with conventional multispectral scanners that operate in a few broad bands of visible and infrared energy. However, broad spectral bands often do not distinguish between similar features. To overcome this limitation, a more sophisticated approach toward spectral signatures has arisen during the past few years. This approach is called image spectroscopy or hyperspectral analysis, which is based on scanning hundreds of closely spaced and very narrow spectral bands. With this technique, it is possible to create continuous spectral response curves, which may be used to identify many objects positively.

ABSTRACT

A study was conducted to compare inter-sensor variability by computing vegetation indices, NDVI & SR. The two sensors compared were Hyperion and ALI (Advanced Land Imager) present on EO-1 satellite. Hyperion is a hyperspectral sensor having a spectral range of 400-2500nm with 10nm bandwidth. ALI is a multispectral sensor with 10 bands of 100nm bandwidth. Hyperion and ALI data were acquired at the same time for two different seasons, dry (April) and wet (October) seasons over Shoolpaneshwar Wildlife Sanctuary, Gujarat, India. Vegetation indices such as SR “ Simple Ratio and NDVI -Normalized Differential Vegetation Index were performed. Seasonal variations were observed in both the data sets. For SR index, Hyperion performed well using October month data. In comparison with ALI, Hyperion showed high NDVI for both deciduous and evergreen species using October month data. The highest NDVI value is assumed to represent the maximum vegetation “greenness” during that period. Results clearly indicated the superiority of Hyperion in vegetation analysis using NDVI & SR indices.

Keywords : Hyperion data (EO-1), ALI (Advance Land Imager),Shoolpaneshwar Wildlife Sanctuary, NDVI, Simple Ratio (SR)

ABSTRACT

The Mumbai region of Maharashtra has been witnessing very rapid urbanization development in terms of industrial, commercial and residential establishments. This has resulted in reclamation of tidal flats and estuarine regions. The ‘marine clay', characteristic of this environment has high swelling potential and consequently affects the performance of the structures. This will have a serious negative impact on the urbanization expansion. In this study, an attempt is made to map the spatial distribution of these expansive clays using the state of art Hyperion data. Reflectance spectra of representative samples collected from the field is used to map marine clays using Spectral Angle Mapper (SAM) technique. Laboratory analyses of these foundation soils (reflectance spectroscopy, mineralogy and Atterberg limits) indicate that they have significant amount of montmorrilonite and has good swelling potential (A_C>1.4). The derived expansive clay abundance map will be of use while planning appropriate remedial measure and future development.

Key Words : Swelling clay, Spectral characters, Geotechnical properties

ABSTRACT

In the present paper, study of spectral reflectance measurements has been carried out for different type of snow and other ambient objects in snowbound areas of Indian Himalaya using Spectroradiometer (350-2500nm). The observations suggest that there are significant changes in the spectral radiances and reflectance values of snow and other ambient objects, which can be discriminated using satellite multi-spectral bands, however for characterizing the snow using satellite sensor, spectral bands having maximum radiances values should be greater than snow radiances and suitable spectral bandwidth are to be identified. The detail analysis of field collected reflectance suggest that, due to aging and grain size variation in snow, the maximum variations in reflectance was observed in the NIR region i.e. around 1040-1050nm. For contamination and snow depth, the maximum variation was observed in the visible region i.e. around 470nm and 590nm respectively. For the moisture changes, the maximum variations observed around 980 and 1160nm. The study also suggests, normalized difference snow index (NDSI) increases with the increase of aging, grain size and moisture content. This study can be helpful in selection of suitable spectral bands for snow cover applications using satellite

remote sensing and developing the algorithms for seasonal snow cover characteristics using multi-spectral and hyper-spectral data.

ABSTRACT

Greenseeker is a handheld computer mounted sensor for observing normalized difference vegetation Index [NDVI= (NIR “R)/(NIR+R)], which may be used to estimate site specific amount of fertilizer nitrogen depending up on the crop condition. The sensor can be used for yield estimation and developing remote sensing based growth models. It is an active sensor with a built in light source for illuminating the target and records reflected light from vegetation at wavelength of 670 nm (red region) and 780 nm (near infrared region) of electromagnetic spectrum. The swath covered by the Sensor is 0.75 m when sensor is placed about 1.0 m above crop canopy.

The sensor was used to record NDVI in wheat- sugarcane intercropping system wherein wheat was grown on raised beds of 1.04 m width with six rows of wheat and sugarcane in furrows at row spacing of 1.38 m. The wheat variety PBW 343 was sown with nitrogen levels @ 0, 30, 60, 90, 120, 150, 180 and 210 kg N ha^-1 (all basal) and sugarcane variety CoSe 92423 was planted in furrows on 7^th November, 2006 in a medium textured loam soil.

The NDVI was recorded in wheat at 17, 41, 59, 73, 88, 113 and 129 DAS using Greenseeker and Spectroradiometer (UNISPEC ^TM of PP system, USA) simulating normal satellite bands i.e.

NIR: 770-860 nm, Red: 620-680 nm, Green: 520-580 nm. The maximum NDVI (recorded at 88 DAS) was used to develop INSEY “ yield relationship in wheat. The NDVI recorded by Greenseeker was integrated with NDVI recorded by Spectroradiometer.

The Greenseeker was also used to monitor crop growth in sugarcane. The NDVI was correlated with shoot population, plant height, LAI and total biomass during formative and crop elongation phase of sugarcane till end of November 2007. Highly significant (at 1%) correlation was observed between GS- NDVI and shoot population till mid August and LAI in sugarcane for entire crop cycle. An exponential model (R² = 0.9017) was developed to estimate LAI of sugarcane from NDVI. The NDVI was significantly (at 5 %) was correlated with plant height till mid August. However, the correlation between total crop biomass in sugarcane and NDVI remained non-significant.

ABSTRACT

Satellite-based hyperspectral imaging became areality in November 2000 with the successful launch and operation of the Hyperion system on board the EO-1 platform. Hyperion is a push broom imager with 220 spectral bands in the 400-2500 nm wavelength range, a 30 meter pixel size and a 7.5 km swath. Prelaunch characterization of Hyperion measured low signal to noise (SNR<40:1) for the geologically significant shortwave infrared (SWIR) wavelength region (2000- 2500 nm). The impact of this low SNR on Hyperion's capacity to resolve spectral detail is studied for the Musiri and Tattayyangarpettai regions of part of Namakkal and Tiruchirapalli districts of Tamil Nadu state, India which comprises a diverse range of minerals with narrow, diagnostic absorption bands in the SWIR. Following radiative transfer correction of the Hyperion radiance at sensor data to surface radiance (apparent reflectance), diagnostic spectral signatures were clearly apparent including: green vegetation; talc; dolomite; crystalline limestone, chlorite; white mica and sericite. Though the derived surface composition maps generated from these image endmembers were noisy (both random and column), the spatially coherent and correlated well with the known geology. The interpreted and processed mineral map is given below. In addition, the Hyperion data were used to measure and map spectral shifts of <10 nm in the SWIR related to white mica chemical variations.

ABSTRACT

Hyperspectral data are generally noisier compared to broadband multispectral data. Therefore, it is desirable to smoothen the reflectance spectra. Smoothing needs to preserve an absorption feature while simultaneously removing noise. It is very essential to optimize the smoothing filter to minimize disturbances to the statistical properties of the original data. This study was carried out to see the effect of Fast-Fourier Transform (FFT) based smoothing technique on the statistical properties of vegetation spectral response and to see the effect of the filter size. The data used for the present study is the reflectance spectra data obtained from space borne EO-1 onboard Hyperion sensor. Filter sizes were varied between 3 and 15 with the increment of 2, i.e. 3, 5, 7..........15. Paired t-test was carried out between the original and the smoothed data (for the selective bands) for all the filter sizes in order to see the extent of distortion with changing filter sizes. Our study revealed that the distortion in the spectra increases with the increase in the filter size. Beyond filter size 11, the number of locations within the spectra where the smooth spectra were statistically different from its original counterpart increased to 14 and reaches 21 at the filter size 15.

ABSTRACT

Leaf N and chlorophyll (Chl) concentration of crop are important indicators of plant nitrogen status. Laboratory determination of plant tissue N is time consuming and costly. Also remote sensing is quickly becoming recognized as a valuable tool that has the potential to asses a wide variety of physiological properties over a large area in a short amount of time. This study examined the relationship of sorghum and bajra canopy reflectance spectral response to its nitrogen and chlorophyll content. The study consisted of two nitrogen level (N₀ : no nitrogen and N₁: recommended dose of nitrogen for each crop) for two crops (sorghum and bajra) . Chlorophyll and N content were measured throughout the growing season for both crops. Reflectance at increased significantly as N fertilizer rate decreased. Chl and N were strongly related to canopy reflectance for either individual wavelength or for spectral vegetative indices or ratios. Sorghum nitrogen fertilizer rate mainly affected leaf reflectance at 575 and 623 nm, while bajra at 565 and 657nm. The reflectance values at 581 and 603 nm had the highest correlation with sorghum leaf N concentration. Similarly, bajra leaf N concentration was highly correlated with 619 and 696 nm. Sorghum and bajra leaf N concentrations were highly correlated with reflectance ratio of R₅₈₁/ R₃₈₁ (r²= 0.44*) and R₆₁₉/R₄₆₂ (r²= 0.78***) respectively with greatest r² value. Similarly, Sorghum and bajra leaf Chl concentrations were highly correlated with R677/R527 (r²= 0.63**) andR688/R409 (r²= 0.71***) or R615/R411 (r2=0.71***),

respectively. Thus our results suggest that spectral reflectance measurements hold promise for the assessment of some physiological parameter at the leaf level real time monitoring of sorghum and bajra N status and N fertilizer management.

ABSTRACT

Pests and diseases cause serious economic losses in yield and quality of many cultivated crops. Detection and assessment of their damage symptoms is very crucial to initiate timely control interventions. The conventional scouting technique adopted for assessment of pest and disease in field crops is very laborious and time consuming. Remote sensing may provide a better means to objectively quantify disease stress than visual methods and it can be used to repeatedly collect sample measurements non-destructively and non-invasively. In this paper we report the changes in the reflectance spectra due to pest and disease incidence in three crops viz., groundnut, castor and rice. Canopy reflectance measurements were made with a hand held multispectral radiometer (MSR 16-R, CropScan Inc) which records incoming radiation and light reflectance with up looking and down looking sensors, respectively in 16 pass bands. Data of percent reflectance at each pass band were processed subsequently using the calibration and correlation constants through a mini computer connected to the sensor. A total of 10 samples were selected for each level of pest/disease. At each sampling, six measurements were recorded and the resulting data were averaged. The reflectance spectra varied for different biotic stresses in the three test crops. Higher absorption in the NIR region between 760-1240 nm was observed for healthy plants compared to the diseased plants in all the three crops tested. The spectral signatures from severely defoliated (by semilooper pest) castor crop showed that the percent reflectance in the visible region between 560-710 nm was higher in the defoliated crop compared to healthy and reverse is true in the NIR region between 810-1100 nm. In case of rice, spectral reflectance in the region between 760-1100 nm could differentiate the healthy and brown plant hopper affected plants. Decrease in reflectance in this region was proportion to the number of hoppers per plant. This could be due to collapse of leaf tissues by hopper damage. The higher reflectance in the visible region (560-710 nm) was observed only when the damage is very severe (hopper burn). Different spectral indices viz., SR (simple ratio), NDVI (normalized difference vegetation index), NPCI (normalized total pigment to chlorophyll index), DWSI (disease water stress index) and WBI (water band index) were compared to distinguish healthy and diseased plants. NDVI was found useful in distinguishing semilooper damaged (defoliated) castor crop from healthy castor. All the indices tested were useful to differentiate the rice plants damaged by sap-sucking pest, BPH at different levels of infestation. Incase of groundnut, the differences in the spectral indices between different disease incidence levels were not significant. Results of the present study demonstrated that by comparing the reflectance spectra generated using ground based high-resolution radiometer, it is possible to distinguish healthy and pest/disease affected crops.

ABSTRACT

This paper is an attempt to highlight the problems of coastal environmental impact assessment owing to logistic constraints, costs of analytical data generation, time gap between data generation and interpretation, quantum of physical and chemical data required for assessment of environmental data through conventional methods and to examine the potential of hyperspectral remote sensing as an alternative for conventional methods. As hyperspectral remote sensing is non-destructive, offers repetitivity and high resolution (spatial and spectral) and hyper-sensitive to many physical and chemical properties of coastal soils and minerals, we recommend use of hyperspectral remote sensing for reduction of cost and man-hours in coastal environmental assessment, without compromising the quality of data.

ABSTRACT

Of late, the importance of integrated study of multi-theme data is being realised in geological mapping and mineral exploration programmes. The usefulness of such a study lies in the fact that data integration and interpretation in a conjunctive mode enables to infer more information than the sets can separately provide. The present paper presents several case studies, illustrating the usefulness of multi-theme data integration in geological mapping and mineral exploration.

1. INTRODUCTION

Integrated study of multi-theme data is being practiced in the recent times in the geological mapping and mineral exploration campaigns. Such a study, in a synergetic fashion, helps to extract more meaningful information than from the study of individual datasets. It not only helps in deciphering regional geological picture, but also in the precise location of drilling targets, thereby yielding rich dividends for the expenditure incurred in the mapping and mineral investigations. Besides, the success ratio of the mineral investigations has also shown a significant increase, resulting in the discovery of more mineral

deposits. Hence the integration of multi-theme data is of paramount importance for the success of geological mapping and mineral investigations.

ABSTRACT

In earth system about 60% of the world's population live within 60 km of coastline and use the coastline for their livelihood. Environmental pollution of the coast, inshore water and deep ocean is one of the important topical issues in the context of human health and global warming. To combat this natural and man made problem, we have to rely on qualitative analysis quantitatively. In the recent advancement in information and technology field, spectral data plays a major dominant role in the environmental studies. This could provide more powerful and accessible means to exploit the enormous wealth of data available in the system. The high-resolution imaging spectrometry (hyperspectral imagery) will help to analyze the data for mapping and other environmental modeling applications. This could attain advanced approaches to deduce surface characteristics and extract features from hyperspectral images. The current capabilities are in which, the prototype system can classify pixels according to surface type. The classification process employs neural network analysis of inputs which include pixel spectra and a variety of processed image metrics, including image “texture spectra” derived from fractal signatures computed for sub image tiles at each wavelength. Thus, this kind of technical analysis can prove to achieve coastal area studies well in advance in the ongoing environmental changes more precisely.

ABSTRACT

The Remote Sensing data volume is vast, so high processing capacity is required. It is impossible to update spatial data without the support of high performance of RS image management, retrieval, and change detection and pattern discovery. After introducing some background information including significance of SDI updating, feasibility and advantages of satellite RS imagery used to update spatial data, the framework of updating spatial and attribute information based on RS image is proposed. In the process, the integrated processing of raster data and vector data is very important, so some functions of RS image processing and GIS software should be fused. In order to extract the anticipated images from vast image database, effective retrieval technique is vital. RS image data mining and knowledge discovery is the synergy of Spatial Data Mining (SDM) and Image Data Mining (IDM). Oriented to the demands of SDI updating to intelligent information processing, some primary issues on RSDM are analysed. It is pointed out that updating SDI by satellite RS imagery will be potential advantageous in the future. RS Data Mining and Knowledge Discovery are very important and will play important roles in the future.

Keywords: Spatial Data Infrastructure (SDI), Remote Sensing Data Mining, Spatial Data Mining, Image Data Mining.

ABSTRACT

The improvement of spatial resolution of satellite remote sensing (RS) imagery, it is possible to update spatial data infrastructure efficiently by satellite RS images. But the RS data volume is vast, so high processing capacity is required. In order to extract the anticipated images from vast image database, effective retrieval technique is vital. The rapid development of Earth Observation System (EOS), the spatial resolution, temporal resolution and spectral resolution of Remote Sensing (RS) image have been improved greatly. Based on contentbased image retrieval, content-based RS image retrieval is put forward and some topics including retrieval pattern, useful image content, feature extraction and similarity measure are researched. After related images are retrieved from vast image database, it is necessary to discover those change areas, so change detection from multitemporal RS images are discussed further. RS image data mining and knowledge discovery is the synergy of Spatial Data Mining (SDM) and Image Data Mining (IDM). It is pointed out that content based RS image retrieval will be potential advantageous in the future and all the techniques discussed in this paper including retrieval modes, content-useful in RS image retrieval. Content-based image retrieval (CBIR) is one of the hot issues in image retrieval, and it can be used to RS image retrieval. That lead to a new area: content-based RS imagery retrieval.

Keywords : Remote Sensing, content based RS image Retrieval, Earth Observation System, Spatial Data Mining, Image Data Mining.

ABSTRACT

Hyperspectral image reduction processes use only information drawn from knowledge related to the surface reflectance properties. The chemical composition and crystal structure control the shape of spectral curve, position and amplitude of absorption bands. Spectral database provide a source of reference spectra useful in classification of hyperspectral images.

An attempt has been made to put all such available data on a structured database for easy access and visualization. A Web-based interface for reference spectra of natural surfaces facilitates data sharing and increases access to reference material for classification.

1. INTRODUCTION

Hyperspectral imaging refers to the imaging of a scene over a large number of discrete, narrow contiguous spectral bands in the visible through thermal infrared portion of the spectrum. Thus it is possible to construct a complete reflectance spectrum of every pixel in the scene.

Field spectroscopy is a nondestructive way to collect information on natural resources and is becoming a common exercise in remote sensing field campaigns. Specific absorption features of reflectance spectrum can be used to identify a number of important rock forming minerals, and have been used by geologists for geologic mapping and studies of volcanoes. Spectral database provide a source of reference spectra useful in classification of hyperspectral images.

ABSTRACT

This paper demonstrates the ability of FTIR for analyzing compositional structures of naturally occurring crystals namely gypsum and calcite. As these two crystals occur in a wide variety of geological environments and are susceptible to compositional and structural changes influenced by pressure, temperature, crystallization fluids and so many other factors, these are extensively studied by geoscientists for interpretation of paleoenvironment, modeling diagenesis of sediments and deducing sediment maturity for hydrocarbon exploration, study of these two crystals is important. Naturally occurring gypsum and calcite crystals collected from Cretaceous marine deposits of Ariyalur area were chosen for the present study as extensive occurrences of hydrocarbons are reported from offshore region of Cauvery basin and exploratory works are going on in the onland region. It is observed that the vibrational spectra of studied crystals show specific patterns in terms of stretching patterns of O-H, C-O, C=O, SO₄ and CO₂. As FTIR offers fast, cost-effective, non-destructive method of analyses of natural compounds, as it is proven useful, it can be utilized extensively in academic research and commercial exploration activities by geoscientists.

Keywords : Spectral characterization, calcite, gypsum, diagenesis, paleoclimate, hydrocarbon exploration.

ABSTRACT

The purpose of this paper is to utilize thermal infra red remote sensing data to find the location of heat processing units which contribute to high temperatures. These industries occur as anomalous pixels in urban area on the temperature map derived from the thermal remote sensing data. The night scenes of ASTER thermal infra red data were used for this study. It is concluded that analysis of temporal thermal remote sensing data can be used as a tool in environmental impact assessment and management. The temperature maps can be helpful in decision making process of siting / relocation of heat producing industries in and around cities.

1. INTRODUCTION

For sustainable industrial development, management and regular monitoring of the industries is needed. Knowledge of industrial impacts on the environment is an essential for environmental impact assessment and management. Thermal remotes sensing techniques can be applied for this.

ABSTRACT

The purpose of this paper is to map the diversity of Formicoidea, richness and habitat preferences with respective to the different forest cover, classified based on the NDVI from LANDSAT TM imagery with the help of remote sensing and GIS. The study is carried out in Sirumalai hills region of Dindigul District, Tamil Nadu state, India recorded a total of 26 species with 15 genera belonging to four sub-families by a taxonomical basis. The NDVI based forest classification results that the area has disturbed dry deciduous forest (SA), undisturbed dry deciduous forest (SB), disturbed mixed deciduous forest (SC), undisturbed semi evergreen forest (SD), undisturbed grassland (SE) and undisturbed dry evergreen forest (SF) types of forest covers. The results of diversity studies, statistical analyses and field study reveals that the tropical semi evergreen forest and tropical dry evergreen forest have yielded more number of species, genera than the mixed deciduous forest and dry deciduous forest which are most disturbed by human beings in establishment of estates, management strategies by the government and land use by the local farmers.

ABSTRACT

Remote Sensing and Geographical Information System play major role in the water planning of river basins. Varahanadhi is one of the 17 major river basins of Tamilnadu, bounded in North by Palar basin, East by Bay of Bengal and West & South by Ponnaiyar basin. It drains through Thiruvannamalai and Villupuram districts. There are three sub basins viz., Ongur, Nallavur and Varahanadhi sub basins. From Survey of India top sheets, Basin boundary, sub basin boundary maps were generated. Administrative map with district, block boundaries was prepared. GIS software - Arc view, was utilized for this purpose. By using ERDAS IMAGINE, Digital Image processing software, satellite image mosaic of Varahanadhi Basin, Geomorphology, Land use, Wasteland, Structural-Lineament maps were generated. IRS P 6 RESOURCESAT, LISS III and PAN data were used for the thematic map preparation. From the collateral data collected, the thematic maps on Geology, Soil, and annual north east, south west. summer, winter rainfall, irrigation system, pre monsoon and post monsoon groundwater levels, ground water quality were prepared using ARC GIS Software. Relief and Drainage map were also generated in GIS environment. The surface water potential was assessed by rainfall run off method for which geomorphology map interpreted by remote sensing and GIS was utilized. Based on geomorphology and land use maps, draft for irrigation was estimated. Geology, geomorphology, depth to bedrock, rainfall pattern, water level maps were used

to asses groundwater potential and draft. Sectoral demand on power, industry and domestic were made based on collected collateral data. Environmental Impact Assessment was assessed using land use maps and ground water quality maps interpreted from remote sensing data for years 1998 and 2004 were prepared and compared. Wasteland map was prepared to know the extent of wastelands and their types as per National Waste Land Board norms. Remedial measures to convert waste lands into productive lands were also suggested. By superimposing geomorphology and lineament maps upon the wastelands, sites suitable for groundwater development in the waste lands were identified. In the same way by using GIS overlay analysis developmental and action plan maps were also prepared with technical recommendations. By applying remote sensing and GIS techniques the basin water resources assessment, draft to meet out sectoral demands and balance of water available for future use can be decided. Varaganadhi basin is a surplus basin as per the study.

ABSTRACT

Presence of mangrove ecosystems on coastline, save lives and property during natural hazards such as cyclones, storm surges and erosion. This study is undertaken to assess the distribution of mangroves in Tamil Nadu. Geographical Information System, Remote Sensing and GPS (Global Positioning System) were used for mapping the mangrove forests. Mangrove wetland map and species zonation maps have been done using didital analysis of Remote Sensing data and ground truth information. The total area of mangroves found in Tamil Nadu and in Puducherry is around 4100ha.

1. INTRODUCTION

Mangroves are typical, tropical specialized trees growing in the saline and brackish water system. Mangrove plants live in muddy and wet saline soils. They are trees associated with shrubs, growing both on the sheltered coast and inland, lining the bank of estuaries and rivers. They are an ecological group of evergreen plant species, belonging to different families, but possessing marked similarities in their physiological characteristics and structural adaptations. Mangrove areas are associated with high leaf production and leaf fall and rapid decomposition of the litter.

Mangrove forests perform multiple ecological functions: They produce woody trees, provide habitat and detritus food for fish and shellfish and act as spawning ground for a variety of fishes, prawns and shellfishes. They harbour a variety of valuable fauna, including migratory birds. They also protect the coasts from storms and tidal waves and help in the formation of land by trapping sediments brought by the coastal community.There are many threats to mangroves. Deforestation is one of the major threats.