eChapters

Sustainable sericulture has to take more care about retaining or rebuilding soil quality and health, since it is very high drain on the nutrient content of soil. Sustainability should an evolution criterion in the process of identifying, screening and adopting techno-biological solutions to the sericultural problems. Greater attention should be paid to learn from the indigenous knowledge. In many of the government-sponsored programmes sericulture has been regarded as one of the essential tool for the rural development in the country. As the activities in the sericulture are capable enough to engage the households completely throughout the year and is ideally suited for improving the socioeconomic standards of the rural poor and has often been utilized under various employment programmes in India. As a result, sericulture is being intensively promoted in traditional states like Karnataka, Tamil Nadu, Andhra Pradesh, West Bengal and J & K.

This chapter tries to find out the constraints in adoption of sericulture as subsidiary enterprise the farmers in the Poonch district of Jammu & Kashmir. Since sericulture is not a major activity in the district and farmers never reluctant to cultivate mulberry in their land and allow only dry land for plantation of mulberry and hardly take care thereafter. Under such circumstances the mulberry grows with lesser leaves production and farmers always faced acute shortage of mulberry leaves during silkworm rearing and they did not get the expected return out of the sericulture. Land, water, proper training of mulberry plants, application of fertilizers guarantee high production and productivity over a wide range in the same areas would qualify to be called as sustainable sericulture system in dry/hilly areas. Besides, other components of technology that can ensure sustainability are soil and water conservation, pests control etc.

Introduction

Plant Genetic Resources (PGR) are uniquely placed within the overall ambit of biodiversity and play an important role in providing food, fuel, clothing, medicine and shelter for the whole mankind. The value of plant genetic resources or the plant germplasm can be visualized from the fact that Sir Joseph Banks, the Director of Kew Botanical Gardens accompanied Captain Cook on a plant collecting voyage. Plant genetic resources are going to occupy the centre stage in plant breeding and seed industry development in India as will be the case with other countries. However, despite the great importance of plant genetic resources in crop improvement programmes, there is ever increasing threat to the PGR due to degradation of their habitats, changes in ecology, cropping systems, modernization of agriculture, rapid replacement of locally adapted indigenous cultivars by modern high yielding varieties and the effect of massive urbanization. This calls for a sustained and scientific management of plant genetic resources. The issue of PGR management remains basically the same whether we are dealing with field crops, vegetable crops or perennials with slight changes in specific cases. For an effective management of PGR, all the CGIAR funded international agricultural research centres have independent units/divisions on PGR management. IPGRI is coordinating and strengthening the PGR management programmes at the international level. In India, National Bureau of Plant Genetic Resources, New Delhi is the nodal organization on PGR management. This article shall deal with the core components of PGR management in vegetable crops.

Phenotypic Diversity

Phenotypic diversity measures the portion of genetic diversity which is expressed phenotypically. So it varies with the character under study and the genetic background and the environment in which it is measured. The measures of genetic diversity based on variance of quantitative traits may be unreliable indicators of diversity in a population at the level of individual gene. But diversity at the molecular level (isozymes, RFLPs) may be a reasonable estimate of phenotypic diversity. The degree of differentiation is related to several biological attributes such as breeding system, mode of pollination and seed dispersal, life history, geographical range, successional stages, etc. The outbreeding populations are much less differentiated whereas the selfers or apomictic are strongly differentiated. Populations of outbreeders contain different alleles especially the rare alleles which contribute little to the diversity. Inbreeders should have greater interpopulations diversity and less intrapopulation diversity than the comparable outbreeders. Further, inbreeders are more prone to show an even distribution of their genetic diversity among populations and this makes their optimum sampling more difficult and any evidence of the geographic pattern of this diversity levels would greatly improve sampling efficiency but geographical and environmental factors rarely explain more than 50% variation.

Plant genetic resources are the most valuable and essential basic raw material to meet the current and future need of crop improvement programme. A wider genetic base assume the priority in plant breeding research aimed as developing new varieties for increased crop production. PGR for food and agriculture are a reservoir of genetic adoptability, which act as buffer against environmental changes and economical challenges. The erosion of these resources results in a severe threat to the world long term food securities. The fundamental objective of the genetic resource conservation is the maintenance of genetic diversity within each of the species. In general PGR include all species which contribute to people by providing food, medicine, feed, fiber etc. PGR is our heritage which needs conservation for prosperity.

Genetic resources management is a complex process starting from the identification of a target gene pool for conservation to the use of genetic resources. Many of these activities not only generate but also require geo-referenced data (Spatial data). Analysis of these data can lead to a greater understanding of the eco-geographic representation of existing collections, increasing the efficiency of conserving and managing genetic resources and broadening our understanding of the distribution of genetic diversity. Genetic resource databases could potentially serve as an information resource to a broader scientific community, providing relatively independent global data sets to meet the unique needs of researcher. GIS can merge genetic diversity information with other georeferenced data such as population density, climate, topography and soils, adding value to genetic resources. GIS analysis can help develop conservation strategies, monitor genetic diversity, select potential collecting sites, design in situ reserves and enhance genetic resources use. Currently, GIS use is constrained by limited georeferenced information.

Paratition Value

Median is calculated for dividing the series into two equal parts. If the series is divided into four, eight, ten or hundred parts then the measures are called Quartile, Octile, Decile and Percentile respectively denoted by Q_(1,2,3), O_(1,2..7), D_(1,2…9) and P_(1,2…99).

MOMENTS

The term moment in mechanics refers to the measure of a force with reference to its tendency to produce rotation. The strength of this tendency is depen- dent upon the amount of the force and the distance from the origin at which the force is applied. If on both the sides of the origin the force are equal than there will be a balance, at a balanced position the positive product equals the negative product.

Moment is used in Statistics in a quite analogous sense. The class frequencies are looked upon as the forces and the deviations of the different values from the mean are taken as the distances. In other words, moment is the mean of the first, second, third, fourth, etc. powers of deviations of the different values from the arithmetic mean. The first moment about the mean is always zero and second moment about the mean is variance.

If the moment calculated from arithmetic mean are called central moments and denoted by μ with a subscript which indicate the order of the moment. Moments are the mean values of powers of the deviations in any frequency distribution taken about three points

SKEWNESS

Skewness means lack of symmetry. Skewness denotes the tendency of a distri- bution to depart from symmetry. A frequency distribution is said to be skewed if the frequencies decrease with markedly greater rapidity on one side of the central maximum than on the other side. This characteristic of a frequency distribution is known as skewness and the measures of asymmetry are usually called measures of skewness.

The main object of measuring skewness is to know the direction of the varia- tion from an average and to compare the frequency distribution and the shape of their curves.

There are two types of skewness

(i) Positive Skewness (ii) Negative Skewness

KURTOSIS

Kurtosis refers to the extent to which unimodal frequency curve is peaked. Kurtosis is a measure that refers to the peakedness of the top of the curve. Kurtosis gives the degree of flatness in the region about the mode of a frequency distribution.

Types of Kurtosis

There are three categories of kurtosis that can be displayed by a set of data. All measures of kurtosis are compared against a standard normal distribution, or bell curve.

The first category of kurtosis is a mesokurtic distribution. This type of kurtosis is the most similar to a standard normal distribution in that it also resembles a bell curve. However, a graph that is mesokurtic has fatter tails than a standard normal distribution and has a slightly lower peak. This type of kurtosis is considered normally distributed but is not a standard normal distribution.

The second category is a leptokurtic distribution. Any distribution that is leptokurtic displays greater kurtosis than a mesokurtic distribution. Characteristic of this type of distribution is one with extremely thick tails and a very thin and tall peak. The prefix of “lepto-” means “skinny,” making the shape of a leptokurtic distribution easier to remember. T-distributions are leptokurtic.

The final type of distribution is a platykurtic distribution. These types of distributions have slender tails and a peak that’s smaller than a mesokurtic distribution. The prefix of “platy-” means “broad,” and it is meant to describe a short and broad-looking peak. Uniform distributions are platykurtic.

1. SEED MATURITY

Harvesting should be done after the attainment of physiological maturity, when the seeds reached complete maturity to avoid harvesting of immature and ill-filled seeds.

1.1. Physiological maturity

It is the stage of accumulation of maximum drymatter within the seeds. It is expressed by maximum seed weight, germination and vigour potential. The moisture content of the seed at this stage is around 25-30% depending up on the species.

1.2. Harvestable maturity

The physiological maturity is represented to a seed and this maturity will not be the same for all the seeds of a single plant / population, due to continuous differential flowering habit. Hence, the stage of attainment of physiological maturity by 80% of the population is considered as the harvestable maturity stage. The moisture content of the seed will be lesser than the physiological maturity stage (18-20%).

1. VARIETY

Variety is a seed/crop which suit the prevailing agroclimatic conditions, high yielding and possessing desirable attributes such as disease resistance, earliness and grain quality. Similarly, the seed should be pure, appropriate classes, and obtained from an authorised official agency.

1. BASIC NUCLEUS SEED

The seed of the notified variety collected from the evolving institute with all the passport information is considered as basic nucleus seed. This seed is sown in prepared healthy field with more row to row and plant to plant distance than the normal recommendation at required isolation distance. Prescribed dose of fertilizer, irrigation and required plant protection measures are provided.

Off types and diseases plants are rogued out at seedling, before flowering, flowering and at physiological maturity stages. Plants are marked with contrast color thread and observed regularly. Marked plants are harvested separately and its produce is used as source seed for production of nucleus seed for next year. Produce of unmarked plants are used as nucleus seed for production of breeders seed. Harvesting threshing and drying are done without reducing physical and genetic purity. The discolored and diseased seeds are removed. The pure seed obtained is the nucleus seed for seed multiplication chain

1. INTRODUCTION

Indian population is estimated to increase to about 1400 million by 2025. Consequently, India’s requirements for food grains and other food products to feed the increasing population will continue to rise. The food grain requirements are estimated at 350 to 370 million tonnes by 2025. The demand pattern for agricultural commodities for the domestic market will also shift as a result of increasing incomes and faster urbanization. Compared to 26% increase in 1991, the urban population is projected to increase by 42% in 2020. For competing in the global market, the product pattern will shift to high value commodities like fruits, vegetables, floriculture, dairy products, meat and marine products. In such a future scenario, it is necessary to increase agricultural production through improved cropping system, judicious use of agro-inputs and wide use of modern agricultural technology. It is also important to augment and streamline the existing marketing system including handling, transportation, storage, processing and distribution.

1. HETEROSIS

1.1. Definition

Heterosis or hybrid vigor or outbreeding enhancement, is the increased function of any biological quality in a hybrid offspring. It is the occurrence of a genetically superior offspring from mixing the genes of its parents.

1.2. Inbreeding depression

Inbreeding depression is the reduced fitness in a given population as a result of breeding of related individuals. In general, the higher the genetic variation within a breeding population, the less likely it is to suffer from inbreeding depression.

1. DEFINITION

Micropropagation is the growing of plants from meristematic tissue or somatic cells of superior plants on nutrient suitable media under controlled aseptic physical conditions.

1. INTRODUCTION

Field run seeds obtained from the seed production field posses high moisture and physical contaminants like trash and other inert materials (sand, stones, soil etc.,), diseased and pest damaged seeds, other crop seeds, weed seeds, deteriorated and damaged seeds, off-size and ill filled seeds, plant remnants etc. Seed processing is must to dry the seeds to safe moisture level, remove unwanted and inert materials as detailed above.

Seed qualities such as vigour and viability are improved by certain physical characteristics of the seed i.e., shape, size, large, denser and sound seed, etc. So, if grading is done to obtain a particular range of size, shape, length and density of the seeds, the quality of the lot is upgraded.

Seed processing refers to all the steps necessary for preparation of harvested seed for marketing namely handling, drying, shelling, preconditioning, cleaning, size grading, treating and packaging.

Any new variety produced by the Scientist has to be multiplied to many times to meet the needs of the farmers. In order to ensure the availability of quality seeds, Government of India have enacted Seed Act 1966 and Seed Rules, 1968. The Seed (Control) order 1983 was promulgated under essential commodities act, 1955 in order to ensure the production, marketing and distribution of the seeds.

1. SEED ACT 1966

The objective of Seed Act is for regulating the quality of certain notified kind / varieties of seeds for sale and for matters connected therewith. The Seed Act passed by the Indian Parliament in 1966 was designed to create a ‘climate’ in which the seeds man could operate effectively and to make good quality seed available to cultivators. Seed Rules under the Act were notified in September 1968 and the act was implemented in October 1969. This act extent to the whole of India and it has 25 sections.

1. SEED CERTIFICATION

Seed Certification is a legally sanctioned system for quality control on seed multiplication and production. It involves field inspection, pre and post control tests and seed quality tests.

1.1. Phases of Seed Certification

Certification shall be completed in six broad phases listed under

1. UNIT OF CERTIFICATION

The entire area planted under seed production programme by an individual constitutes an unit, provided;

1. All the seed production programme is to produce seed of one category and one variety.
2. Area does not exceed 10 hectares and scattered fields constituting one unit (10 ha) should not be separated by more than 50 metres distance (Table 1).
3. The crop of the entire area is more or less of the same growth stage. The seed crop is grown as sole crop and it is not heavily and uniformly lodged.

1. SEED STORAGE

Is the maintenance of high seed germination and vigour from harvest until planting.

1.1. Importance of seed storage

Seed storage is important to get adequate plant stands in addition to healthy and vigorous plants.

1. SEED INDUSTRY BEFORE INDEPENDENCE

The Royal Commission on Agriculture (RCA) constituted in 1925 suggested the following for seed improvement

There should be a separate organization within agriculture departments to deal with seed distribution and seed testing.

The seed distribution enterprise should be self-sustaining.

Seed distribution should be organized through co-operatives, other associations, seed merchants (whenever they are available), through seed agents, as well as through agricultural department staff and any other agency which could be considered suitable.

Seed merchants of proven enterprise should be given every encouragement.

1. DEFINITION

Seed marketing is the one of the most vital components of seed technology. On it depends the size and scope of the seed industry. Broadly it includes such activities as production, processing, storage, quality control and marketing of seeds.

Seed marketing refers to the actual acquisition and selling of packed seeds, intermediate storage, delivery and sales promotional activities.

Rural Development : Concept and Meaning

Mahatma Gandhi said, “India lives in its villages. If the village perishes, India will perish too”. This saying about the social, economic and political development of rural areas justifies that India is predominantly an agrarian country with more than 70 percent of its population living in more than five lakh villages. Agriculture is the predominant livelihood occupation and the rural population largely consists of small and marginal farmers, agricultural labourers, artisans and scheduled castes and scheduled tribes. A large part of this rural population is still living below the poverty line and is the focus of rural development programmes. Rural Development is not a new concept for India rather it is a very basic principle of our culture. The famous epics like Ramayana and Mahabharata teach us the dignity of humanity and benevolence and justice to people. In ancient days, our villages were self-sufficient and requiring very little assistance from outsiders. However, during British rule, the rural economy was destroyed and the rural mass was made dependent on goods and services provided by outsiders. There was no rural development policy as such to make the people self-reliant. Some of the rural development activities were taken up by the British Government in India during the Great Bengal Famine. These attempts were of very limited scale without having legal sanctions behind the move.

1.1. Definition

Soil: Thin layer of earth’s crust made up of disintegrated and decomposed rocks, complex mineral compound, organic matter, water/air and living organism like bacteria, fungi, insects and worms and serves as the natural medium of growth of plants.

Provides nutrients, moisture, anchorage (support) and air to plants.

Parent materials are igneous rocks, sedimentary rocks and metamorphic rocks.

Soil Science: Science dealing with soil (Natural resource) on the surface of the earth, including pedology (Soil genesis, classification and mapping), physical, chemical, biological and fertility properties and their relation to management for crop production.

Any material of natural or synthetic origin added to the soil to supply one or more plant nutrients.

10.1. Classification of fertilizers

10.1.1. Straight fertilizers

Supply only one primary plant nutrient, namely nitrogen or phosphorus or potassium.

Eg. Urea, ammonium sulphate, potassium chloride and potassium sulphate.

1.1. Dry farming (Dryland farming)

Cultivation of crops in a region where the annual rainfall is more than 750 mm.

Semi arid crops with growing period of 75-120 days.

Crop failure is less frequent.

Moisture conservation practices are necessary.

Vermicomposting is the process of turning organic debris into worm castings by earthworms.

Earthworms feed on decaying material, pass through alimentary canals and excreted as castings.

pH of the castings is 7 (neutral) and the castings are odourless.

Contain high amounts of nitrogen, potassium, phosphorus, calcium, and magnesium.

Contains 5 times the available nitrogen, 7 times the available potash, and 1 ½ times more calcium and rich in humus.

Improves aeration, porosity, structure, drainage, and moisture holding capacity.

Preparations containing living cells or latent cells of efficient strains of microorganisms that help crop plants to uptake of nutrients by their interactions in the rhizosphere when applied through seed or soil.

Accelerates microbial processes in the soil.

1.1. Sericulture

Refer to rearing of silkworms for the production of raw silk.

Major activities are mulberry cultivation, silkworms spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits.

Bombyx mori is the most widely used. Silk-fiber is a protein produced from the silk-glands (modified labial glands) of silkworms.

2.1. Breeds of poultry

9.1. Molecular breeding and marker assisted selection

Using conventional breeding, developing new varieties takes atleast 15-20 years.

Molecular breeding shortened the time to 7-10 years.

One of the tools for faster variety development is Marker Assisted Selection (MAS).

MAS-refers to use of DNA markers to assist phenotypic screening.

Plants that possess particular genes or quantitative trait loci (QTL) may be identified based on their genotype rather than their phenotype.

13.1. Germplasm

Also known as genetic resources or gene pool or genetic stock.

Sum total of hereditary material i.e. all the allele of various genes, present in a crop species and its wild relatives

2.1. Causes of pest outbreak

Activity of human beings which upsets biotic balance of ecosystem is prime cause for pest outbreak.

4.1. Black gram, green gram, lablab and cowpea

4.1.1. Bean aphid: Aphis craccivora (Aphididae: Hemiptera)

1. Host range: Groundnut, redgram, peas, beans, safflower, lablab, niger

6.1. Cotton

6.1.1. Leafhopper: Amrasca devastans (Cicadellidae: Hemiptera)

7.1. Early shoot borer: Chiloinfuscatellus snellen

1. Damage symptoms

10.1. Classification of pesticides

10.1.1. Based on organisms

1.1. Definition

Alteration in one or more of physiological processes culminating in a loss of coordination of energy utilization in a plant as a result of the continuous irritation due to presence or absence of some factor or agent.

A plant is said to be diseased when there is a harmful deviation from normal functioning of physiological process (Federation of British Plant Pathologists, 1973).

4.1. Agricultural production economics

An applied science, wherein principles of choice are applied to use of land, labour, capital and management in farming.

Explains conditions under which profit and output can be maximized and cost and use of physical inputs can be minimized.

1.1. Credit

Defined as a device for facilitating temporary transfer of purchasing power from those who have surpluses of it to those who are in need of it.

8.1. Kisan Credit Card (KCC)

Credit scheme introduced in August 1998 by Indian Banks.

Prepared by NABARD on recommendations of R.V.Gupta committee to provide term loans and agricultural needs.

KCC holders are covered under personal accident insurance up to Rs.50,000 for death and permanent disability and up to Rs.25,000 for other risk.

Premium is borne by both bank and borrower in a 2:1 ratio.

Validity period is five years with an option to extend for up to three more years.

2.1. Market structure

Refers to those organizational characteristics of a market which influence nature of competition and pricing, and affect the conduct of business firms.

Those characteristics of market which affect the traders behavior and their performances.

Formal organization of functional activity of a marketing institution.

A knowledge of structure is essential to identify imperfections in performance of a market.

8.1. Warehousing

8.1.1. Definitions

Defined as the assumption of responsibility for storage of goods.

Protector of national wealth, for the produce stored in warehouses is preserved and protected against rodents, insects and pests and against the ill effect of moisture and dampness.