eChapters

Maize (Zea mays L., 2n=20) is a cereal crop that is grown widely in more than 165 countries in a range of agro-ecological environments. Even in Asia, the rapid increase in maize acreage in the last decade is an indication that it is winning the battle as compared with rice. The Asian region will see itself as a major global player in the near term. In the past it was mainly confined to food in India and many other countries however, now it has become the industrial crop. Maize has several industrial applications and more than 1000 products are being developed from maize in India and around 3500 products in USA and other countries. It is a raw material for many of the important industries viz. pharma, textile, paper, film, tyre food, processing, packing and biofuel, etc. The growth rate of poultry, livestock, fish, wet and dry milling industries are very high therefore, maize demand will continue to increase in year to come.

Global Maize Scenario

Globally, maize is primarily used as feed livestock and has many industrial uses; however in many developing countries it is still used as a food crop. Small-scale farmers in both sub-Saharan Africa and Mesoamerica generally grow maize as a food crop for household consumption and for saline urban markets. Maize is particularly important in the diets of the rural and urban poor in sub-Saharan Africa and Latin America. Globally, maize is grown in 165 countries in a total of 185.1 million hectares area with 1018.1 million tones of production and 5.52 tonnes/ha productivity (Anonymous 2015-16). Almost 70% of the total maize production in the developing world is coming from low and lower middle income countries. In Asia, maize has recorded the fastest annual growth (around 4%), as compared to other cereals. Maximum maize production was in USA (353.7 million tonnes) followed by China (218.6 million tonnes) and Brazil (80.3 million tonnes) (Fig. 1), while the area under maize cultivation was in China (36.3 million hectare) followed by USA (35.5 million hectare) and Brazil (15.3 million hectare) (Fig. 2). The average world maize productivity is 5500 kg/ha, but the highest productivity of maize was achieved in USA (9970 kg/ha) followed by Canada (9591 kg/ha) and France (8137 kg/ha) (Fig. 3).

The ever mounting population in 21^st century is a great challenge for the researchers to provide ample food and that has to be achieved within the context of existing challenges such as deteriorated arable land along with increasing adverse affects of changing climate. There is demand to increase food production to the tune of 70% by 2050 (Wani and Sah, 2014). Although major crops have achieved good progress, vulneRability to climatic variability emerged as a serious concern in crop improvement which could be attributed to higher sowing densities that in turn lead to more competition for water and nutrients. Abiotic stresses can be considered as major yield restraining factors among different crops. The projected estimations for changes in abiotic stresses such as drought, water logging and heat reveals far serious concerns for crop productivity (Qin et al., 2011; Bailey-Serres et al., 2012). Therefore, the concern of global food security in the era of climate change has compelled plant scientists in different crops to shift to breeding for climate resilient genotypes. Maize, being a hardy crop has an inherent potential to perform well under sub-optimal environments with minimum crop management (Kole et al., 2015). Abiotic stresses such as drought, heat and water logging affects maize yield adversely.

Although, conventional breeding approaches have exploited its fullest potential for production of elite maize hybrids but still little success attained for breeding climate resilient genotypes or varieties owing to the fact that stress tolerance is multi-genic or quantitative in nature. Therefore, the best option is to utilize the molecular breeding along with the conventional approaches for development of climate smart varieties.

Raster sub-setting is done to select the desired area or bands of the raster image on which the user wants to perform analysis. Raster sub-setting is done in two ways:

Spectral subset: Spectral sub-setting is done to extract few desired bands from the multiband raster image which are required for analysis.

Spatial subset: Spatial sub-setting is done to minimize the area or extent of raster image to the desired area or extent for further analysis.

Raster sub-setting in R is done by functions available in the ‘raster’ package. The following packages are required in this chapter:

Vector data analysis is performed to convert raw input vector data to output that provides new and meaningful information which ultimately supports decision making and disclose hidden patterns. There are various techniques to analyse vector data like buffering, intersect, union, and so on. Some of the most commonly used techniques with their R-code examples are explained in this chapter.

First of all, you need to import all the packages which are required for performing this exercise. These packages include rgdal and sp for importing and re-projecting vector data as well as raster and rgeos for performing vector analysis operations.

The calculation of raster data statistics is very essential before performing some geoprocessing operations. Raster data statistics involve knowing the distribution of pixel values in a band, comparing the pixel values of two bands, extracting values of all bands for a particular geographical location or point, and computing statistics like mean, median, standard deviation, etc. at pixel level across all bands of raster dataset.

In R, codes to perform raster data statistics are present in raster package. The visualisation of raster data statistics can be done by rasterVis package. So, we need to import these packages in R in order to perform this exercise.

Bonsai is a Japanese art form using miniature trees grown in containers. The first documented evidence of an oriental word for container planting emerged approximately 1600 years ago in China. Bonsai is a Japanese pronunciation of the earlier Chinese term pen zai. A bon is a tray-like pot typically used in bonsai culture. The purposes of bonsai are primarily contemplation (for the viewer) and the pleasant exercise of effort and ingenuity (for the grower). Bonsai is not intended for production of food, for medicine, or for creating yard-sized or park-sized gardens or landscapes. Instead, bonsai practice focuses on long-term cultivation and shaping of one or more small trees in a single container.

The practice of bonsai is sometimes confused with dwarfing, but dwarfing more accurately refers to research and creation of plant cultivars that are permanent, genetic miniatures of existing species. Bonsai does not require genetically dwarfed trees, but rather depends on growing small trees from regular stock and seeds. Bonsai uses cultivation techniques like pruning, root reduction, potting, defoliation and grafting to produce small trees that mimic the shape and style of mature, full-sized trees.

Bonsai can be created from nearly any perennial woody-stemmed tree or shrub species. Which produces true branches and can be cultivated to remain small through pot Some species are popular as bonsai material because they have characteristics, such as small leaves or needles that make them appropriate for the compact visual scope of bonsai. Some of the plants highly suited for making bonsai

The fore limb is termed as pectoral limb or thoracic limb (Fig. 5-1). It is attached to the thorax by means of muscles of pectoral girdle (shoulder girdle). It is composed of four major segments, the shoulder girdle, arm, forearm and manus. The skeleton of shoulder girdle is formed by the shoulder bone, the scapula. The arm is formed by the arm bone the humerus. The forearm is formed by two bones the radius and ulna; and the manus is formed by the carpus consisting of six short bones –the carpal bones arranged in two layers, the metacarpus consisting of one large and one small metacarpal bones and the digits consisting of six short bones the phalanges and six small sesamoids arranged in two rows for each limb.

Shoulder girdle

The shoulder girdle (thoracic girdle or pectoral girdle) in general is composed of the scapula, coracoid and clavicle. In ruminants the scapula is well developed, the coracoid is in the form of a small rounded process fused with the ventral end of the scapula and the clavicle is absent or in some subjects it occurs embedded in the brachiocephalicus muscle cranial to the point of the shoulder. But this possibility is very rare. Hence, in ox only scapula is considered as the bone of shoulder girdle.

Scapula

The scapula is a flat triangular bone applied obliquely ventrad and craniad against the cranial part of the lateral wall of thorax. Its long axis extends from the fourth thoracic spine to the sternal end of the first rib. It presents two surfaces, three borders and three angles.

Embry Transfer Technology (ETT)

Definition: The process of removing one or more embryos from the reproductive tract of a donor female and transferring them to one or more recipient females.

Parasite- The word parasite is derived from the Greek. Para- beside and sitos- food. Parasites are those living organism which reside on or inside the body of some other species of living organism.

Host- Those organisms which provide food shelter and conducive environment to parasite for their growth, development and reproduction. e.g. Tape worm in small intestine of man and animals.

Disease = dis + aise (see + ease) old French word

Transmission- Movement of biological agents (Virus, Bacteria, Rickettsial, Fungi & Parasites) from one place to another place via vector or vehicle/ tools

Vector- Latin word- bearer

Vector is a living organism (usually an arthropod) which transfers infective forms of a parasite from one host to the other.

Veterinary physiology deals with the study of normal functions of animal systems. It includes the study of how animals work and the physical and chemical processes that occur within animals. The examples of various biological processes in animals include gas exchange, blood and circulation, osmoregulation, digestion, nervous and muscle systems, respiration, growth, reproduction, endocrine function and how animals behave and function in different environmental conditions. This also includes the possible manipulation of the reproductive processes by means of hormone manipulation techniques for more efficient livestock and poultry production.

Abstract

Livestock sector has gained momentum world over with consistently increasing market demand for live stock products. India with annual 171 million tons of liquid milk production, 74 billion egg production, 3.8 million tons of poultry meat and 11.50 million ton of fish production offers enormous opportunities for women agri-preneurs to venture into this area. Micro-enterprise development related to livestock rearing activities like dairy farming, sheep husbandry, goatry, poultry, livestock feed production, vermin-composting and value added product development and production are the important enterprises in which women can utilize their technical skills. Finance for infrastructure and small scale agro-processing units are requisites to success of rural women entrepreneurs as these will help them to enhance their competency to use raw materials from the farm and livestock to earn substantial income. Rural women entrepreneurs are facing tough competition from the large scale organizations and urban entrepreneurs where governmental interventions are essential. The women producers are not collective in their approach for marketing their products because they are scattered and mostly uneducated. The women entrepreneurs are heavily dependent on middlemen for marketing of their products who pocket large amount of profit. Hence, government should take steps to provide market information of different products and finance to the rural entrepreneurs at concessional rates.

Abstract

Most of the vegetables available in the market contain large quantity of pesticide residue. This has created serious health problems among the people. Self-sufficiency in safe to eat vegetable production can be achieved either by commercial production or better farming by family in kitchen garden. As quality control mechanism is not strong and well established, the produce from commercial farming can’t be assured as safe to eat product. The continuous effort taken by our centre and other existing systems in the state for the last six years have made the people aware about the quality of vegetables. In Kerala, most of the families, especially in town and nearby areas are having only 3 to 10 percent of land. The space they can spare for vegetable production either on the ground or on roof top is hardly 10 to 40m². Pest and disease attack is another issue in Kerala. Hence our centre gave importance for the design and development of 10m² /20m² /30m² poly-kitchen garden which could accommodate 160 to 350 plants (almost all pest susceptible crops required for a family can be accommodated inside these structures.) suitable for a family by utilizing multi-tier grow bags (one multi-tier grow bag can accommodate 35 to 50 plants), grow bags and troughs. In these structures, cultivation practices can be done even during night without the fear of snake and mosquitoes by fitting a fluorescent lamp. This technology was approved by Government of Kerala and declared 75% subsidy for establishing this full facility for a family. In order to popularize this technology among the public, we had conducted many training programmes and empowered the women (house wife/employed woman) in vegetable production and to make their mindset to ensure a kitchen garden (either a conventional type grow bag kitchen garden or poly-kitchen garden) in their house plot. When we started working with this goal (in 2013, when project was started), < 20% of required vegetables for the state was produced in the state. On account of our continuous effort, by the year 2016, state managed to pick up its vegetable production by 64.5%

Citrus (Citrus spp.)

Citrus is an important fruit crop and ranks third in area which is followed by mango and banana. They are grown in 105,396 hectares in India. Among the oranges, mandarin oranges, limes and sweet oranges are very popular while lemons, grape fruits, pummelos, sour and bitter oranges are of minor importance. The Citrus spp. are grown in larger extent in the states of Maharashtra, Karnataka, Kerala, Tamil Nadu, Andhra Pradesh, Punjab, Haryana, Rajasthan, Assam, Orissa and Bihar.

Nematode menace in citrus gardens are very much realised. In 1912 the citrus nematode, Tylenchulus semipenetrans was reported from California and found to cause ‘slow decline’ disease. More than 30 genera of plant parasitic nematodes are associated with the Citrus spp. Among them, Tylenchulus semipenetrans, Radopholus citrophilus, Meloidogyne spp. Pratylenchus spp. Xiphinema spp. and Hoplolaimus spp. are often associated with the crop.

Spectacular productivity gains have been achieved in wheat and rice in south and south-east Asia and also several other developing countries in Latin America and central Asia due to introduction of dwarfing genes in these two crops purely through conventional plant breeding approaches and these developments were christened as “Green Revolution” (Reynolds and Borlaug, 2006). The wheat breeding progrmme was being spearheaded by Norman Borlaug at CIMMYT (International Maize and Wheat Improvement Centre, Mexico) supported by Sanjay Rajaram and the rice breeding programme was under leadership of Gurdev Singh Khush at IRRI (International Rice Research Institute, Manila, Philippines) coinciding with these exciting developments during mid-sixties to mid-seventies. In recognition of these quantum jumps in yield of wheat and rice, Borlaug was awarded Nobel Peace Prize for Peace in 1970. Later on World Food Prize was instituted by joint efforts of Borlaug and his colleagues to honour Agricultural Scientists and others on pattern of Nobel Prize who had made significant contributions to sustainable food production and food and nutritional security globally. M. S. Swaminathan happened to be Director General, Indian Council of Agricultural Research when Green Revolution was taking roots in India and because of his enormous contributions to provide effective leadership to ensure that Green Revolution happened in India, M. S. Swaminathan is credited as “Father of Green Revolution in India” and he was the first recipient of World Food Prize in 1987 for spearheading the introduction of high-yielding wheat and rice varieties in India. G. S. Khush along with Henry Beachell received 1996 World Food Prize for achievements in enlarging and improving the global supply of rice during a time of exponential population growth and Sanjay Rajram was the 1914 World Food Prize recipient for his scientific research that led to huge increase in world wheat production.

Biotech crops or genetically modified (GM) crops or the transgenic crops are those crop plants into which certain genes have been introduced from unrelated sources beyond the boundary of sexual compatibility using techniques which bypass the normal sexual cycle. The transgenic production technology uses recombinant DNA technology where a recombinant DNA molecule is a vector into which the desired DNA fragment has been inserted to enable its cloning in an appropriate host. The recombinant DNA technology has opened up the flood gate of plant biotechnology to produce plants which are equipped with novel genes to produce products never heard of that a plant will do. Now transgenics in several crops have been commercialized globally. The importance and potential of GM crops can be realized from the fact that acreage under such crops at global level has reached to 189.8 million ha covering 24 countries in 2017. One can have a feel of this huge acreage under commercialized GM crops globally if it is compared with about total cultivated area of 143 million ha in India.

Over the last 30 years field of agricultural biotechnology has expanded rapidly due to greater understanding of DNA as the chemical double helix code from which genes are made. Genetic engineering is one of the modern biotechnology tools that are based on recombinant DNA technology. The term genetic engineering, often interchanged with terms such as gene technology, genetic modification, or gene manipulation, is used to describe the process by which the genetic makeup of an organism can be altered using “recombinant DNA technology.” This involves the use of laboratory tools and specific enzymes to cut out, insert, and alter pieces of DNA that contain one or more genes of interest. The ability to manipulate individual genes and to transfer genes between species that would not readily cross is what distinguishes genetic engineering from traditional plant breeding and opens up a huge opportunity to create crop plants equipped with desirable genes from the sources which cannot be sexually crossed. With conventional plant breeding, there is little or no guarantee of obtaining any particular gene combination from the millions of crosses generated. Undesirable genes can be transferred along with desirable genes or while one desirable gene is gained, another is lost because the genes of both parents are mixed together and re-assorted more or less randomly in the offspring. These are the major limitations of conventional crop breeding.

Introduction

The term biological control was first used in scientific literature in 1914. Baker and Cook (1974) described biological control as “reduction of inoculum density or disease producing activities of a pathogen or parasite in its active or dormant state, by one or more organisms, accomplished naturally or thoroughly manipulation of environment, host, or antagonists or by mass introduction of one or more antagonists.”

Certain genera of fungi have greater potential for being effective bio-control agents eg. Trichoderma, Gliocladium, Chaetomium; entomogenous fungi as Entomophthora, Beauveria, Metarrhizium, Hirsutella; Nematophagous viz., Catenaria, Zoopage, Stylopage, Paecilomyces and predaceaus fungi like Arthrobotrys, Dictylella, Dactylaria and Nematoctonus (Narain, 2018). Biopesticide formulations based on these fungi are also called as “Microbial pesticides”.

Abstract

Palms are generally grown commercially in tropical climate. But some of the palms like coconut, areca nut and palmyra palm are cultivated successfully in West Bengal, Orissa, Assam, and some pockets of Bihar that lies under sub tropics of India.Due to unsuitable climatic factor their production is more affected by abiotic and biotic stress including different kinds of diseases. The important disease are bud rot, basal stem end rot, nut shedding,stem bleeding in coconut, mahali disease, foot rot, stem breaking in arecanut and palmyra palm in the region have negligible incidence of diseases. These destructive diseases are the major constrain in production and causes severe yield loss in these palm fruits. Therefore effective management strategies are required by continuous monitoring the incidence and severity of these diseases caused by different pathogens.

Integrated disease management is the most accepted strategies for sustainable crop production that involves the holistic approach integrating cultural, physical, mechanical, chemical and biological means to control the disease. However, results of the disease management trials depend upon soil condition, age of the crop, stage of disease development and weather parameters of that particular area. Although it is impossible to manage a field free of pathogen but considerable reduction of the disease can be achieved through a proper integrated disease management system. Thus the causes and remedy of the diseases prevalent mainly in palms particularly in subtropical conditions has been reviewed for better management and sustainable production.

Hunter and Mohler discovered the isozymes. In 1959 Markert and Moler introduced the concept of isozymes, which they defined as the different molecular forms in which proteins may exist with the same enzymatic specificity (Buth 1984). This means that different variants on the same enzymes have identical or similar functions and are present in the same individual. As such, their importance for understanding gene action in development and differentiation was exploited during the1960s in both animals and plants. Nevertheless, isozymes played a minor role in research on plant biochemistry until 1966 when genetic polymorphism for isozymes within the same population was discovered (Stebbins 1989, Wendel 1989). That revealed the possibility for population genetics to make precise quantitative estimates of genetic variability based upon one parameter of the molecular structure of the primary products of the genes themselves.

Plant population genetics were not long in following their zoological colleagues and the investigation of both animals and plants increased explosively. This application, however, necessitated a partitioning of the isozyme concept, since the relevant isozyme subset, defined by Prakash (Buth 1984) as the variant proteins produced by allelic forms of the same locus, to avoid the now common confusion with isozymes which are the various polymer produced from monomers specified by different loci. The development of genetic distance or similarity coefficients (Lukasová 1985) allowed the summarization of isozyme data for intersample comparisons and so quantified isozyme data were soon applied to comparative studies of taxa.

QTL Traits

Polygenic inheritance, also known as quantitative or multifactorial inheritance refers to inheritance of a phenotypic characteristic (trait) that is attributable to two or more genes and their interaction with the environment. Unlike monogenic traits, polygenic traits do not follow patterns of Mendelian inheritance (qualitative traits). Instead, their phenotypes typically vary along a continuous gradient depicted by a bell curve. Though not necessarily genes themselves, quantitative trait loci (QTLs) are stretches of DNA that are closely linked to the genes that underlie the trait in question. QTLs can be molecularly identified (for example, with PCR or AFLP) to help map regions of the genome that contain genes involved in specifying a quantitative trait. This can be an early step in identifying and sequencing these genes.

DNA Sequencing

DNA sequencing is the determination of the precise sequence of nucleotides in a sample of DNA. Sequencing can be done on a short fragment of DNA to cover the entire genome. The maps thus constructed using the nucleotide sequences in the correct order is called as sequence map.

In 1977, twenty-four years after the discovery of the structure of DNA, two separate methods for sequencing DNA were developed: the chain termination method (Sanger et al., 1977) and the chemical degradation method (Maxam and Gilbert, 1977). Both methods were equally popular to begin with, but, for many reasons, the chain termination method is the method more commonly used today. In chemical degradation method, chemicals specific to each base remove the last base, which has been labelled. The method uses toxic chemicals which required high care while handling.

In chain termination method, DNA polymerase extends a DNA strand in which dideoxynucleotide becomes incorporated terminating the chain extension (phosphodiester formation) at the 3’OH site making an array of fragments differing in length. This method is based on the principle that single-stranded DNA molecules that differ in length by just a single nucleotide can be separated from one another using polyacrylamide gel electrophoresis.

What is FISH ?

Fluorescent in situ hybridization is a technique in which single-stranded nucleic acids (usually DNA, but RNA may also be used) are permitted to interact so that complexes, or hybrids, are formed by molecules with sufficiently similar, complementary sequences. Through nucleic acid hybridization, the degree of sequence identity can be determined, and specific sequences can be detected and located on a given chromosome. Fluorescent in situ hybridization (FISH) is a powerful technique for detecting RNA or DNA sequences in cells, tissues, and tumors. FISH provides a unique link among the studies of cell biology, cytogenetics, and molecular genetics.

Principle of FISH

FISH involves the preparation of short sequences of single-stranded DNA, called probes, which are complementary to the DNA sequences the researchers wish to paint and examine. These probes hybridize, or bind, to the complementary DNA and, because they are labeled with fluorescent tags, allow researchers to see the location of those sequences of DNA. Unlike most other techniques used to study chromosomes, which require that the cells be actively dividing, FISH can also be performed on non dividing cells, making it a highly versatile procedure.

In genetics, microRNAs (miRNA) are single-stranded RNA molecules of 21-23 nucleotides in length, which regulate gene expression. miRNAs are encoded by genes from whose DNA they are transcribed but miRNAs are not translated into protein (i.e. they are non-coding RNAs); instead each primary transcript (a pri-miRNA) is processed into a short stem-loop structure called a pre-miRNA and finally into a functional miRNA. Mature miRNA molecules are partially complementary to one or more messenger RNA (mRNA) molecules, and their main function is to down-regulate gene expression. They were first described in 1993 by Lee and colleagues in the Victor Ambros lab .

MicroRNAs can be encoded by independent genes, but also be processed (via the enzyme Dicer) from a variety of different RNA species, including introns, 3' UTRs of mRNAs, long noncoding RNAs, snoRNAs and transposons.

The genes encoding miRNAs are much longer than the processed mature miRNA molecule; miRNAs are first transcribed as primary transcripts or pri- miRNA with a cap and poly-A tail and processed to short, 70-nucleotide stem-loop structures known as pre-miRNA in the cell nucleus. These pre- miRNAs are then processed to mature miRNAs in the cytoplasm by interaction with the endonuclease Dicer, which also initiates the formation of the RNA-induced silencing complex (RISC). This complex is responsible for the gene silencing observed due to miRNA expression and RNA interference. The pathway in plants varies slightly due to their lack of Drosha homologs; instead, Dicer homologs alone effect several processing steps. The pathway is also different for miRNAs derived from intronic stem-loops; these are processed by Dicer but not by Drosha. Either the sense strand or antisense strand of DNA can function as templates to give rise to miRNA.

I. General information

1. All cacti are succulents
2. All succulents are not cacti
3. All the genus belonging to the family Cactaceae are native of America
4. A genus in Cactaceae family which is not native of America is Rhipsalis
5. Sedum and Sempervivum are native to temperate Europe
6. Aporocactus, Rhipsalis and Schlumbergera are native of Mexico
7. Dischidia and Hoya are native of South-East Asia

I. General information

1. Cool season turf grasses are Perennial rye grass, Creeping bent grass, Colonial bent grass, Kentucky blue grass, Canada blue grass, Poa spp, Festuca spp, Agrostis spp, Lolium spp
2. Warm season turf grasses (25-35^oC) are Cynodon sp, Zoysia sp, Stenotaphrum secundatum, Paspalum notatum, Eremochloa ophiuroides, Axonopus sp, Pennisetum clandestinum, Buchloe dactyloides
3. Broad leafed turf grasses are Arachis pintoi, Dichondra repens
4. Based on mowing height, turf grasses are classified into tall, medium & dwarf
5. Turf grasses which needs high mowing height of>3.5 cm are Tall fescue, sheep fescue, Canada blue grass, fine fescue, wheat grass, orchard grass
6. Turf grasses which requires medium mowing height of d” 3.5 to 1.0 cm are perennial rye grass, Kentucky blue grass, Buffalo grass, etc.,
7. Turf grasses which requires low mowing height of d” 1.0 cm are colonial bent grass, creeping bent grass, Annual blue grass
8. Turf grasses are classified based on their recuperative capacity into fast, medium & slow

Soil and water conservation measures

Soil conservation is using and managing the land based on the capabilities of the land itself involving application of the best management practices leading to profitable crop production without land degradation.

Water erosion control

Water erosion occurs simultaneously in two steps : detachment of soil particles by falling raindrops and transportation of detached soil particles by flowing water. Therefore, water erosion can be minimized by preventing the detachment of soil particles and their transportation.

Land capability classification

Introduction: The United States Department of Agriculture (USDA) land classification system is interpretative, using the USDA soil survey map as a basis and classifying the individual soil map units in groups that have similar management requirements. At the highest of categorization, eight soil classes are distinguished, namely, arable lands (I to IV) and non arable lands (V to VIII).

Origin of land capability classification (1933) : The Georgia Piedmont Land Capability Classification (LCC): First U.S. effort to systematically determine the best use of lands by classifying and mapping erosion rates and potential in relation to both physical characteristics and agricultural capacity.

Definition: Land capability classification is a system of grouping soils primarily on the basis of their capability to produce common cultivated crops and pasture plants without deteriorating environment over a long period of time.

Classes: Land capability classification is subdivided into capability class and capability subclass nationally. Some states also use a capability unit.

The capability classification provides three major categories of soil groupings: (1) Capability unit, (2) capability subclass, and (3) capability class.

Introduction

The development of any region is reflected in its quantum of energy consumption. With a view to keeping the pace we have to grow our energy resources at a rate that commensurate to sustainable development. There is already shortage of electricity, reflected in power cuts notwithstanding enhancement of electricity production of several folds in the country. The problem is more severe in context with rural areas in India where some 70% of population live and have agriculture as the main occupation. Although statistically few thousand villages are yet to be electrified, the availability of regular supply in far off places has been a problem and the farmers are unable to derive benefits of electricity. The fast depleting kerosene is used for lighting and diesel oil for running agricultural machinery including pumps. In addition people burn firewood, agricultural waste and cow dung cake for cooking food causing irreparable damage to the ecosystem. According to Lester Brown there will be plenty of food to eat but no fuel to cook. The burning of cow dung deprives farmers the use of potential source of organic manure. Further, due to shortage of energy resources, farmers are unable to process the agricultural products to enable them to accrue more benefits. The situation is still worse in arid region where bio mass is scarce and there is no hydro electricity. In addition, farmers are unable to generate additional income due to lack of energy resources to run appropriate device in cottage industries. In this context, solar energy utilization has a tremendous potential for providing needful energy to the farmers for domestic, agricultural and allied applications leading to a sustainable development.

Introduction

Agricultural produce are being sun dried since ages as the first step to preserve the product for future consumption. It is still practised being most inexpensive over mechanical and other advanced drying systems. The most prevailing disadvantage of open sun drying is the quality losses due to insect infestation, enzymatic reactions, microorganism growth, and mycotoxin development. On the other side, sun drying is also a highly labor intensive and time consuming process prone to theft and damage by birds. It also suffers with the lack of process control and treatment uniformity (Bansal and Garg 1987, Bansal, 1987).

To overcome these disadvantages several types of solar dryers have been developed over the years (Ekechukwu and Norton 1999). These dryer may be identified into three group namely active, passive and hybrid. As regards their structural arrangement three generic subclasses were also identified: direct-modes (the solar-energy collection unit is an integral part of the entire drying system), indirect-modes (the solar collector and the drying chamber are separate units) and mixed-modes solar dryers. Natural convection solar dryers have become more suitable for rural sector and remote areas, as they work on single energy option and do not require any other external energy source (Pangavhane et al. 2002).

4.1 INTRODUCTION

The method of propagation in plants may be sexual or asexual. In sexual method of propagation, specialized reproductive cells called gametes are formed by the process of gametogenesis. Fusion of the male and female gametes leads to the development of an embryo and eventually the seed.

4.2 GAMETOGENESIS

The production of male and female gametes is known as gametogenesis. It occurs within microspores and megaspores. It involves only mitosis. It is of two types: (1) microgametogenesis and (2) megagametogenesis.

INTRODUCTION

Potato is a vegetatively propagated crop mainly through tubers. Seed is the costliest input, which constitutes nearly half of the production cost. Due to the high cost of seed, seed replacement rate is low, which results in build up of various tuberborne diseases.To maintain high tuber yield, multiplication is done through “Seed Plot Technique” (SPT), which involves seed production in low aphid pressure period to minimize transmission of viruses and also adopt a set of cultural practices aimed at minimizing disease spread. The production of healthy seed tubers through SPT is expensive and the low rate of tuber multiplication (normally 68 times) provides only a limited quantity of quality tubers. Further, the low aphid areas suitable for producing healthy seed in the country lie in the northern plains and high hills (> 1800 m above mean sea level). Changing climate scenario is likely to shrink the window for potato cultivation and increase pathogen/vector attacks across the country thereby seriously limiting quantity and quality of seed in the country. An alternative technology of true potato seed (TPS) or use of botanical seed has shown great potential for producing both diseasefree healthy (quality) and cheaper planting materials for commercial potato production. This chapter describes the classical TPS technology and two novel potential TPSbased technologies in potato propagation.

INTRODUCTION

Information is power in the present age of rapid technological innovations; since information technology (IT) empowers people. IT emerged as the major driver of growth in all walks of life during last quarter of 20^th century and is currently in a steady growth trajectory. It encompasses almost all human endeavors including agriculture. IT can facilitate agriculture in two broad ways; (i) as a tool for direct contribution to agricultural productivity and (ii) as an indirect tool for empowering farmers to take informed and quality decisions which will have positive impact on the way agriculture and allied activities are conducted. Precision farming extensively uses IT to make direct contribution to agricultural productivity. The indirect benefits of IT in empowering Indian farmer are significant and remains to be exploited. The emerging scenario of a deregulated agriculture under WTO has brought about a greater ‘need’ and urgency to make IT an integral part of decision making by agriculture sector. The changing environment faced by Indian farmers makes information not merely useful, but necessary to remain competitive. The farmer urgently requires timely and reliable sources of information inputs for taking decisions. At present, the farmer depends on trickling down of decision inputs from conventional sources, which are slow and unreliable. Besides, the personnel who work for the welfare of Indian farmers, such as extension workers, do not have access to latest information, which hinders their ability to serve the farming community effectively. IT will constitute the primary resource in agri-clinics, agri-business centers, kisan call centers, agri-nukkads, etc. that have been launched by Government of India and other organizations to ensure inclusive growth. Potato is an input-intensive crop and IT will have a special role in making its cultivation more productive and profitable.

INTRODUCTION

India is the second largest producer of potato in the world contributing about 12.52%of production from 11.29 % area under potato with an average yield of 22.31 t/ha. Potato is grown in almost allthe states in India under diverse agroclimatic conditions. About 90% of the total potato area is located in the subtropical plains, 6% in the hills and 4% in the plateau region of the peninsular India. Indo-Gangetic plains account for about 76% of the potato area and about 87% of the potato production in the country. Availabilityof assured qualityseed is the most important production constraint in all the potato growing regions of the country.

Seed is the basic vital input in agriculture and its timely availability in adequate quantity as per demand decides the strength growth of agricultural economy in the country. Seed has played a very important role in India’s green revolution and shallcontinue to be the importantcomponent in the days to come. There is a saying “as you sow, so shall you reap”, which traditionally relates to the quality of seed determining the production, has been the wisdom of our forefathers. The traditional farmers’ practices are to save their own seeds generally selected from healthy plants from fields which are freefrom diseases pests, harvest them separately, clean, cure and then store in containers and inspect regularly for any kind of damage; or they get quality seed from other seed producing farmers onbarter basis, indicating thereby the importance of seed in their production system.

21.1 INTRODUCTION

High population pressure has forced us to plough 46 per cent of our country area for food production. The present productivity is 12.36 tonnes/ha of fruits needs to be raised to 40.0 tonnes/ha by using N : P₂O₅: K₂O with other inputs, since recommended ratio is 0.75:0.50:1.00 only.

Since cost of the inputs like fertilizers and manures are very high, hence, efficient nutrient management is essential for sustainable fruit production and protection of the environment from different types of hazards occurring due to misuse of costly fertilizers.

The soils of India and especially of arid and semi-arid regions are impoverished to plant nutrients. Considering economy, energy and environment, it is imperative to use nutrients effectively by adopting the appropriate doses proper, placement and correct timings of application and to sustain the available nutrients in soil at the optimum level.

Abstract

Traditional knowledge on plants and their uses by tribal indigenous culture is helpful in the conservation of biodiversity. During 2017-2018, ethnobotanical investigations of the plants growing in Neelum Valley in District Bandipora (a part of Kashmir Himalaya) were carried out to collect information regarding different usages of the plants species growing in the region through questionnaire and interviews. Floristically, a total of 57 species belonging to 54 genera and 38 families were investigated to be used as medicine, food, fodder, timber, fuel wood, vegetable/edible fruit, resin yield and herbal tea purposes. On the basis of the floristic analysis of the study area, the leading family recorded was Asteraceae with (11%) species co-dominated by Rosaceae (9%). In terms of habit forms, herbaceous (70%) growth form is the most dominant. The most frequently used plant parts are leaves (26%) followed by whole plant (23%) and roots (19%). The plant documented cured different categories of diseases, the most common diseases such as diarrhea, fever, digestive problems, urinary troubles, rheumatism, eye diseases, skin diseases and wounds. Based on investigated knowledge, the data are discussed under sub-head as single, double and multi-diseases curing plants. The present study can provide a baseline data for future researchers, policy makers, common public, land managers, and the other stakeholders to develop scientifically-informed strategies for conservation of natural resources and sustainable use of plant resources in hotspot regions like Himalayas and other similar biodiversity rich sites.

Abstract

Wild plants have a great role in the lives of tribal peoples living in and around the world by way of providing products for both food and medicine. Such herbal plants are the core of research, which can solve several health issues as well as nutritional supplements. Keeping on the view we have presented a summary of medicinal plants used as nutraceuticals collected from various regions of India. This communication describes 35 herbal plants used as a medicine against different diseases as well as their nutritional applicability.

Abstract

Recently there has been increasing interest in plants and plant-derived compounds as medicinal agents. In Ayurveda, a wide range of medicinal uses of Pterocarpus santalinus is described. Many important bioactive phytocompounds have been extracted and identified from the heartwood of P. santalinus. The major bioactive compounds present in the heartwood of P. santalinus are santalin A and B, savinin, calocedrin, pterolinus (K,L) and pterostilbenes. These phyto-compounds present only in small amounts and have more effect than nutrients. The heartwood of the plant is used traditionally for the treatment of inflammation, diabetes, headache, skin diseases, jaundice, and in wound-healing. A wide range of pharmacological activities and health benefits of P. santalinus have been reported, including antioxidative, antidiabetic, antimicrobial, anticancer, and anti-inflammatory properties, and protective effects on liver, gastric mucosa and nervous system. All these protective effects were attributed to bioactive compounds present in P. santalinus. Most of the secondary metabolites reported from this plant are terpenes, phenolics, flavones and sterols. The present communication gives the phytochemistry and pharmacological activities of P. santalinus on health with up-to-date information.

Abstract

Natural plant products are known to prevent several deleterious diseases. This potency of plants to act as medicinal therapeutic source is due to the presence of various bioactive compounds including alkaloids, phenols, flavonoids and glucosinolates (GSLs). Among array of these compounds, GSLs are important class of plant secondary metabolites. The mechanical or physical injury to plant leads to the activation of this “GSL-myrosinase” system resulting in the formation bioactive compounds viz., thiocyanates, nitriles, isothiocyanates, and epithionitriles. Out of these compounds, isothiocyanates (ITCs) are well known for their therapeutic properties. Allyl isothiocyanate (AITC) commonly known as “mustard oil” is one of the naturally occurring ITC which is derived from hydrolysis of sinigrin, the major GSL in cruciferous vegetables like horseradish, wasabi, brussels radish etc. Due to high bioavailability in human body, it has been widely studied for its important bioactivities. Therefore, this review highlights the significant biomodulatory effects viz., antioxidant, antimutagenic, in vitro, in vivo anticancer, antimicrobial, and insecticidal activities of AITC.

Abstract

Medicinal plants in recent years attracted much attention of researchers and become the basis of modern pharmaceuticals because of their active biologically compounds. Boerhavia diffusa commonly known as Punarnava belongs to family Nyctaginaceae is a widely distributed herb that has been naturalized in many areas of the world. It is utilized as a green leafy vegetable in many Asian and African countries besides possessing anticancer, antiestrogenic, immunomodulatory and antiamoebic activities due to the presence of valuable phytochemical compounds. Medicinal value of this plant is because of presence of specific kind of phytoconstituents like alkaloids, flavonoids, triterpenoids, lipids, steroids, lignins, proteins, boeravinone A-F, glycoproteins and carbohydrates which are present in huge quantity in this herb. In view of its therapeutic importance, it is widely used in Ayurvedic, Siddha, Homoeopathy, Unani, Modern and Tribal medicinal system. Whole plant sometime its parts are utilized for curing different disorders by tribal people in India. It is a well known ethnomedicinal plant species mostly found in subtropical and tropical regions of the world.

Abstract

About 20 percent of the world’s total population is residing in the mountains and this proportion is likely to increase in the present century as environmental degradation and pollution are driving the human population for settlement in the clean and serene environment of the mountains. Himalayan region has sizeable area in countries like India, China/Tibet, Nepal, Pakistan, Afghanistan, Bhutan, etc. Remarkable progress has been made in greenhouse research and development in many countries. However, Himalayan regions which reserve unique flora and fauna have attracted little attention so far. Changing climate, fast increasing population and shrinking land and water resources are the major challenges before us to meet the food and nutritional security of the population at global level. Improvement in the production and productivity of crops are the immediate need to boost the availability of food and improve the economic conditions of the farmers.

Greenhouse technology has tremendous potential to improve production and productivity of crops even under uncongenial soil and climatic conditions. The farmers having very small farm holdings in countries like Japan and South Korea have improved their income and living standards by adopting protected cultivation technologies. Similarly, Israel has demonstrated successful crop production under desert and uncongenial climatic conditions by improved water management practices and using greenhouse technology. However, India is yet to trap the potentials of the technology. Modern greenhouses require uninterrupted huge electric power for control of environment (heating/cooling/air circulation etc), which is considered one of the major causes for global warming. High installation and running (energy) cost, high cost of production; poor government support and lack of farmer friendly /cost effective greenhouse technology are some other challenges. Appropriate modifications suiting to our requirements, as per the need of crop, climate and farmers may lead to popularization of greenhouses in the country, especially among the small and marginal farmers. Defence Research & Development Organisation (DRDO) successfully demonstrated the innovative approach to popularize low cost zero energy based solar greenhouse technology in higher Himalayan regions of the country. Such greenhouses are specifically designed using local resources and also trap natural solar radiation/ heat and maintain it for longer period. Similarly, other approaches like using mud/ unbaked bricks, double wall approach, making hot beds, blackening of walls, using water bottles, greenhouse-cum-animal shed, etc. effective to reduce the adverse effects of the environment on crops with little inputs in hilly regions. Need of the hour is to review our approach for the greenhouse technology in farmers’ prospective and device simple and cost effective innovations for fast propagation of greenhouses in the country. This will not only improve the economic status of the farmers but also provide nutritive food to their families and enhance production and productivity of various crops in the country without deteriorating the environment.

Stem cell research is one of the most important and promising areas of research in biological science in recent times. The stem cell technology has revolutionized modern biology. It is playing a major role for improving human as well as animal health by controlling number of incurable degenerative diseases and restoration of damage to organs via transplantation therapy. Stem cells are a specific group of cells that remain in an undifferentiated state and can be found in embryos, fetuses and adult individuals. Stem cells are primitive, undifferentiated cells present in almost every tissue that have the ability to differentiate into different types of tissue like bone, tendon, ligament, cartilage etc. Bone marrow stem cell is the ideal stem cell that is unspecialized and can undergo lineage specific differentiation into bone or blood cells under different signals or environment with new special function. Several verities of stem cells have been isolated and identified in vivo and in vitro. The two broad types of mammalian stem cells are embryonic stem cells that are found in blastocyst, and adult stem cells that are found in adult tissue, bone marrow.

Okra has higher average nutritive value (ANV) of 3.21 which is higher than tomato, egg plant and most of the cucurbits except bitter gourd (Grubban, 1977). Its roasted seeds are substitute for coffee. It is one of the export potential crop where it accounts to 60 per cent of fresh vegetables (excluding potato, onion and garlic) exported from India. Importing countries are Middle East, Western Europe and USA.

Origin and Distribution : It belongs to the genus Abelmoschus established by Medikus, 1787, however de Candolle (1824), treated it as section of Hibiscus.   In 1924 Hochreuntiner reinstated the genus Abelmoschus of Medikus stating that calyx, corolla and stamen fused together at the base and fall as one piece after anthesis (deciduous) where as in case of hibiscus these are persistent. Though the genus is of Asiatic origin, the origin of cultigen Abelmoschus  esculentus is variable like India (Master, 1875) Ethiopia {de Candolle (1883) and Vavilov (1957)}, Western Africa (Chevalier, 1940 and Mardorct, 1947) and Tropical Asia (Grubban, 1997) and probably its might have entered India at the end of 19th century. Cultivated okra is of old world origin. It arose as a cultigen in the Abyssinian region (Ethiopia). Wild species are indigenous to Africa.  Three wild species Abelmoschus tuberculatus, A. moschatus and A. ficulneus are native to India. Introduced to Mediterranean region to Europe and Asia. But during Columbian period it was introduced to America.  It still turnout to be polyphyletic (many places) in origin. A. tuberculatus (Indian origin) and an unknown species cross resulted into A. esculentus.

Water melon is tender to frost and most of cultivars require relatively long growing season. Plant growth and fruit development are fallowed by higher temperature and abundant sunlight. Atmospheric humidity greatly regulates fruit and foliage diseases.

Taxonomy and Origin: Ealier it was classified as Citrullus Vulgaris Schrod. But in 1963 Thieret called attention to the correct name, C. lanatus (Thumb) Mansf. Africa is centre of origin of the genus. In 1857 David Living Stone, the famous missionary explorer found both bitter and sweet melons grown together in Africa and native people used them as source of water. Cultivation is prehistoric as there are pictures made in ancient Egypt. Early cultivation occurred in Mediterranean area and as far as India also and It was brought to USA by European colonist as early as 1629.

Onion

Onion is very popular vegetable crop grown worldwide. Consumption is in the form of fresh, frozen, and dehydrated bulbs and green bunching onion. Origin of Allium cepa is still somewhat mystery. Vavilov (1951) suggested that the onion originated in the area of Pakistan. Others have suggested Pakistan, Iran & the mountain areas to the north (Jone& Mann, 1963). One fact is certain that the onion has been around in its present edible form for thousands of years. Onion recorded in tombs as early as 3200 B.C. It was mentioned as a food in the bible and in the Koran with reference thought to be around 1500 B.C. In addition to being a food considered by people, plant is having certain healing power. Some early drawing indicates that onions were used in spiritual offerings.

Bearing

Bearing is connotation of flowering and fruiting. When a fruit tree flowers and fruits, it is said in bearing condition. Different fruits have different bearing habits, inflorescences, types of flower, mode and medium of pollination, pollen viability and all these account a lot for the bearing of fruit plants.

Bearing habit

If one observes a mango tree, he/she may find it does produce the fruits terminally on a shoot and it citrus he/she finds the fruits always produced laterally in the leaf axils. The manner or patter in which a plant produces its fruit is known as bearing habit or fruiting habit. Bearing habits are specific to the kind of plant. In determining the bearing habit of any plant three points are to be considered.

A. Agronomic Considerations for Good Experimentation

For laying out of any experiment (Short / long term) at on-station and on farmers field, some of the agronomic considerations are very important for better results using experimental designs. Therefore, these are discussed here in this chapter.

1. Cropping History

The crop performance and its yield is affected by the crop grown and management followed during previous years. Therefore, for meaningful interpretation and factual reflection on yield trend due to the treatment proposed to be evaluated, the details of crop grown during previous 2 years/ seasons with details of management followed especially input applied needs to be recorded.

At country level, there is major paradiam shift from cropping systems towards farming system research in XI Plan period. The mandate of Project Directorate for Cropping Systems Research, Modipuram stands changed with focus on Farming Systems and re-named as Project Directorate for Farming Systems Research. w.e.f. 1.4.2009. The All India Co-ordinated Research Project on Cropping Systems with its 69 on-station and on-farm centres representing different agro-climatic zones of the country also stands re-named as AICRP on Integrated Farming Systems. As such, the much needed methodologies and procedures for planning, monitoring and interpretation of farming systems related data are not readily available. Therefore, some methodologies and procedures which can be adopted to execute Farming Systems Research for drawing meaningful conclusions are discussed here.

14.1 Computer

Computer is an electronic device designed to accept and store data, process them and produce meaningful results under the direction of detailed step by instructions.

In 1822, Charles Babbage, a professor of Cambridge University designed a machine called an “Analytical Engine”, which could store data and perform arithmetic operations and printing out results. He is known as “Father of Computer”.

14.1.1 Basic anatomy of computer

The word Anatomy of a computer means inner structure of the computer. The study of anatomy of computer is necessary to acquire the knowledge and functioning of its inner components. Thus, essentially a computer consists of the following three main units