eBook Chapters

Food is a resource of immense importance and its safety in the whole production and supply chain, is very crucial. In the last century, drastic increase in the incidence of food borne illnesses, large-scale food poisoning outbreaks and surfacing of new foodborne pathogens and hazards were widely reported. Contaminants can enter food through various pathways in the food production process, and can occur naturally or as the result of inferior or inadequate production practices. Concerns on food safety are fuelled by the industrialization of agricultural production, liberalization of trade, tourism, food consumption pattern and food preparation practices. The availability of information through the mass and social media increases the number of reported cases of inadequate food safety. International competitiveness depends more on quality and safety concerns than on prices and this creates a need for safer food production and distribution practices.

Growing population has increased the demand on food supply. Providing safe and hygienic food to the population is an essential consideration. Food safety systems and tools need to be in place to assure safe food, until which the food businesses would not flourish or be able to build their reputation. Food safety systems and management tools are important as they assist food business organizations to build confidence in people regarding food safety.

Cooking oil when heated there will be some changes like its colour, flavour, smoke formation etc. One change is the change in total polar compounds (TPC). TPC is used to measure the quality of oil. The TPC value increases with the reheating of oil, higher TPC value means the oil having high contain of peroxide and hydro peroxide. FSSAI fixed the value of TPC at 25%, beyond of this value the cooking oil can causes health issues like hypertension, atherosclerosis, Alzheimer’s disease , liver disease even liver cancer.

Food safety is a discipline ensuring safe consumption of food without any injuries to human health. It is multifaceted and influenced by various factors including, food processing, handling and practices, consumer demand and their knowledge, globalization of world food trade, changes in food consumption pattern (Chen et al., 2020).

Previous Year Questions

1. CS 2015: Discuss the impact of rapid increase in population on food and agriculture (12.5 marks)

What is Food security?

The Food and Agricultural Organization (FAO) – “when all people at all times have physical and economic access to sufficient, safe and nutritious food to meet their dietary needs and food preferences for an active and healthy life”.

It has Following Dimensions

• Availability: It means food production within the country, food imports and the stock stored in government granaries.

Food security is an essential feature of a country’s independence and sustenance. Rapid growing population and increasing purchase capacity, both play an influential role on food security. The cultivation or agriculture has declined the world over, with India and Kerala being no exceptions mainly due to the lack of human resources to work with the soil. Uneconomic crop pricing, lack of social accreditation, poor and unstable income, insecurity to life and health etc. are the main factors which discourage the youngsters in our country from becoming ‘farmers’.

Introduction

The importance of food security and its management world over has been recognized long back. The World Food Summit in 1974, called in response to the persistent and widespread under-nutrition and the future role of agriculture, stressed upon establishment of committee to review and recommend location specific action plan in sensitive areas. Asserting that every man, woman and child has the inalienable right to be free from hunger and malnutrition in order to develop their physical and mental faculties, an international undertaking on world food security was set up in which member nations committed to maintain food stocks to ensure routine and emergency food supplies (in case of crop failure, natural disaster, etc.). Monitoring the implementation of such undertaking has since then become the responsibility of the Committee on World Food Security.

Introduction

Food security means access by all people at all times to enough food for an active healthy life (Reuntlinger, 1985; World bank, 1986; FAO, 1989). But now-a-days, food security is used differently at national, regional and household level. At regional and national levels, it is related to regional and national balances between availability and need whereas at household level, it is related with food production resources, income available for purchases and assistance sufficient to meet the aggregate needs of all household members.

Availability of food alone may not guarantee access due to poor distribution or lack of purchasing power as co-existence of aggregate food self sufficiency and widespread malnutrition and hunger do exist. As per Chen and Kates, 1994, food security includes combination of criteria as:

17.1. Fruit Products Order (FPO), 1995

Promulgated under Section 3 of Essential Commodities Act, 1955.

For regulating sanitary and hygienic conditions in manufacture of fruit, vegetable products.

Mandatory for all manufacturers of fruit, vegetable products to obtain a license under this order.

Food security, defined as the availability, access, and utilization of sufficient, safe, and nutritious food for all people at all times, is a critical global challenge. This article examines the multifaceted issues contributing to food insecurity, including population growth, climate change, economic instability, and geopolitical conflicts. It explores the impact of these factors on food production, distribution, and access, highlighting the interconnectedness of global systems. Furthermore, the article discusses various solutions and strategies to enhance food security, such as sustainable agricultural practices, technological innovations, policy reforms, and international cooperation. Emphasizing a holistic and integrated approach, the article argues that addressing food security requires coordinated efforts across sectors and scales, from local communities to global networks. By fostering resilience, equity, and sustainability in food systems, we can move towards a future where everyone has access to the nourishment they need to lead healthy and productive lives.

1.    In milk and milk products, non bacterial ropiness or sliminess may be due to the stringiness/sliminess caused/resulted

(a) Due to thin film formation of proteins, when cooled

(b) From cream thickness

(c) By mastitis, fibrin and leucocytes from the milch animal’s blood

(d) All of the above

2.    In milk, bacterial ropiness is caused by slimy capsular material from the cells usually

(a) Lipids

(b) Proteins

(c) Gums or mucins

(d) Polysaccharides

Food is a complex system of inorganic and organic compounds. These compounds are present in food in unique combination and uniquely organized structures, and therefore, every type of food has unique characteristics, nutritive value, sensory quality, texture, etc. Food items are always in physical, chemical and biological dynamics, however rate of change vary from food to food. Those highly perishable in nature undergo faster rate of spoilage as compare to those semi-perishable or stable. Foods are affected by nearly every variable of environment. Heat, cold, light or other radiations, oxygen, moisture/dryness, natural food enzymes, microorganisms, macro-organisms, industrials and agricultural contaminants, time, etc. - all adversely affect the foods resulting to its spoilage or deterioration. Spoilage may be referred to the losses in nutritive value, sensory desirability, safety and aesthetic appeal to the unacceptable level. Level of unacceptability is the subject of socio-economic status and policies of the state. A food which is of unacceptable quality for one society may be of acceptable quality for other society.

History reveals that food was the root cause of many wars and also the battles were won or lost over food spoilage and its control. Wars and the need to provide safe food to armies in the region far away from the areas of their production have always focused attention on the problem of food spoilage, and this valid today even. Some of the most important advancements in the technology of food preservation were made during the war-time. Of these, most important was the technology of preventing food from spoilage for months together developed by French scientist Nicolas Appert for French army. He won awarded money of 12,000 Francs in 1908 for this. The World learnt the art of canning foods in which the food is packed in a sealed metal container and heated sufficiently. He, however, could not explain the principle behind the preservation by canning. Some 50 years later, work of Louis Pasteur explained that the growth of microorganisms was the major cause of food spoilage which are killed in Appert’s method of preservation.

After harvesting the quality of fruits and vegetables begins to diminish and products is edible for only a limited time then products begin to spoil or rot. Losses occur during harvesting and handling of fruits and vegetables can be minimized by proper techniques but processed food spoilage is bit difficult to control and stop after infection and contamination of microorganism.

Spoilage

Spoilage is deteriorative process which results reduction in quality of food (fruits and vegetables) which become inedible. The changes in food that cause it to lose its desired quality and eventually become inedible is called food spoilage or rotting. After harvesting, the quality of fruits and vegetables begins to diminish and product is edible for only a limited time. The deterioration and spoilage of fruits and vegetables may occur at different ways.

The losses in harvested products begin immediately after detachment of products from their parental plants. After some time, theses products begin to spoil or rot. Spoilage can be defined as the deteriorative process which renders the food inedible or results in reduction in quality. Spoilage of fresh fruits and vegetables usually occurs during storage, transportation and during processing. They also get contaminated with spoilage organisms either from each other or from the containers. Mechanical injuries during harvesting and transportation further aggravates the deterioration process.

Food is essential for human survival. It provides the required energy and vital nutrients for sustainable growth and development. With the increase in population and awareness, the demand for nutritious, fresh and healthy food also increases. Although adequate food is produced in order to meet the increased demands, it fails to reach the consumers in need due to food Food Storage and Preservation Practices   35 wastage and spoilage occurring during various stages of harvesting, food production, storage and transportation. Gajanana et al., (2009) stated that there is a mammoth wastage of food post-harvest. It is estimated that 20 to 60 % of produce are wasted during and after post-harvest. 

Importance of Food Storage

Food storage is both a traditional domestic skill and is important industrially. Food is stored by almost every human society and by many animals. Storing of food has several main purposes:

•Storage of harvested and processed plant and animal food products for distribution to consumers

•Enabling a better balanced diet throughout the year

•Reducing kitchen waste by preserving unused or uneaten food for later use

•Preserving pantry food, such as spices or dry ingredients like rice and flour, for eventual use in cooking

•Preparedness for catastrophes, emergencies and periods of food scarcity or famine

•Religious reasons (Example: LDS Church leaders instruct church members to store food)

•Protection from animals or theft

Introduction

    1.    Food Science is the application of the physical, biological and behavioral science to the processing and marketing of foods (Margaret, 1968).

    2.    Technology can be defined as the science dealing with knowledge of doing things efficiently and effectively.

    3.    Food science helps us understand the theory example: what methods can best be used to store and preserve food to maintain quality and prevent spoilage.

    4.    Food technology demonstrates how the food is stored, preserved, processed and transported and has been responsible for development of new techniques for processing and preservation of food on a commercial scale and for packaging it in such a way that it can be sold conveniently.

    5.    Food science deals with the study of facts of the physical, chemical and biological sciences as they influence the processing and preservation of food.

    6.    Food technology deals with engineering and other scientific and technical problems involved in transforming edible raw materials and other ingredients into safe, nutritious and appetizing food products (Desrosier, 1977).

    7.    Food science is concerned with basic scientific facts about food, where as food technology concerned with the processing of raw materials into foods that meet human needs and wants.

    8.    Indian agriculture has undergone a sea change during the past half a century. Starting with the campaign for “grow more foods” in the forties, India reached self sufficiency during the eighties.

The proximate system of analysis consists of the analytical determinations of water (moisture), ash, crude fat (ether extract), crude protein and crude fibre. Nitrogen-free extract (NFE), more or less representing sugars and starches, is calculated by difference rather than measured by analysis.

Water

1. Water constitutes about 70 percent of an adult’s body weight and water (moisture) is the predominant constituent in many foods.
2. All foods contain varying amounts of water in the range of 20 to 90%.
3. The hypothalamus is a brain center that controls activities such as maintenance of water balance, regulation of body temperature, and control of appetite.
4. Moisture content of some foods

SYNOPSIS

There have been conflicting practices, recommendations regarding a healthy diet in human beings. Unscientific food habits are limitation to good health and active life. Because of various social, cultural, religious and economic factors human beings in the same climatic conditions and living situations, have been practicing different food habits leading to many health problems. What to eat, how much to eat and when to eat are not clear with the masses. This paper attempts to throw light on these aspects.

Introduction

Food adulteration compromises quality of foods and causes human health hazards is a menace mankind had been facing since ages. Spice adulteration scandals in the year 2004, Horse gate scandal in Europe during 2013 are famous examples of food fraud. Various forms of food adulteration and cheating such as substitution of cheaper food components in place of original product, addition of non-permitted substances, and false claims by misbranding or mislabeling are prevalent from time immemorial (Spink et al 2019).

Synonyms : Aphthous fever; Contagious aptha;  Panzootic aptha; Vesicular aptha.

Foot and mouth disease (FMD) is an acute, highly communicable viral disease affecting cloven hoofed animals, both domesticated and wild. It is the most contagious disease known in the animal kingdom. It is characterized by vesicular eruptions in the epithelium of the buccal cavity, tongue, nares, muzzle, feet, teats and udder.

A footnote is a notation at the bottom of the page in a printed document. Footnotes are usually presented in smaller print than the dominant text, and they are used for a variety of purposes. The “foot” in “footnote” refers to the fact that the notation is located in the “footer” or “bottom” of the document. A similar concept is the endnote, a note which is provided at the end of a document, rather than at the bottom of a specific page. When a text has footnotes, they are indicated with various symbols or superscript numbers. The asterisk symbol, *, is a common symbol for footnotes, but a variety of symbols including daggers, †, may be used. In a text with a lot of footnotes, numbers are usually used to indicate footnotes, so that the reader can keep track of what is going on. Endnotes are typically indicated with numbers, to make it easier for people to look them up.

Different style manuals have different rules about using footnotes, and it is important to follow style guidelines when submitting material for publication. Because footnoting can get very complicated, most style guidelines devote at least a few pages to the footnote. Some people avoid using footnotes at all, while others relish footnotes, because footnotes provide a great degree of freedom when they are used well.

Forage crops are plant species used to feed domestic animals (such as cattle, sheep, goat, pig, and poultry). Both cultivated and wild plants can serve as forage. The domestic animals feed on forages either by grazing or stall feeding (cut fodder eaten in stalls).

Grazing, that is pasturing of animals, is cheaper and allows production of both livestock and dairy produce at a lower cost because no expense is involved in growing, cutting, transporting or feeding. In North and South America, Australia, New Zealand, and in many other temperate countries pastures are widespread and popular because sufficient land is available. While land is cheap and plentiful, labour is scarce and expensive; hence management of natural, and in recent years sown pastures has received much attention.

Until about fifty years ago, the natural grasslands in the Western countries met the minimum needs of the farmers and grassland management was operated at a level comparable to subsistence agriculture of many developing countries. In other words, emphasis was laid on exploitation of natural productivity of the grassland, using a low level of management based on minimum use of inputs like chemical fertilizers. However, it was soon realized that productivity of native grasslands will have to be greatly improved if the high demands for meat and milk were to be adequately met.

In India, however, out of a total cultivable area of about 131.11 million ha less than 2 per cent is utilized for forage crops because feeding the large human population takes the first preference for land use to produce grain and cash crops. It is, therefore, necessary to intensify efforts, particularly in over-populated countries, for a more efficient production of high yielding forage crops to get maximum return out of minimum land.

Forage harvesting is more complex as compared to grain crops. Forage crop is of great bulk and mass, containing 70-80% water when first harvested. For storage it must be dried, either naturally or artificially, to a safe moisture content of about 20 to 25%. Due to low product value it limits the economic feasibility of mechanization of harvesting operation. The mowers are used to cut the crop and windrow in the field, which is manually collected for further chopping. The forage harvester consists of a combination of plant-cutting unit and a chopping unit and is called field forage harvester. The field forage harvester performs the functions of both row binder and silage cutter, as it severs the standing stalks from the ground and chops them into silage in one continuous operation in the field. It can be grouped into two according to the mechanism used to cut the crop viz. field choppers and flail harvesters.

Introduction

Foraminifera or forams for short are the most abundant, diverse and widely distributed Protists in marine realm. They are found in all marine environments, from the inter-tidal to the deepest ocean trenches, and from the tropics to the poles (Todo et al., 2005). In some places, foraminifera are so abundant that the sediment on the bottom is mostly made up of their shells. For example, tourists from all over the world get attracted to the pink sands of Bermuda. These sands get their colour from the shells of Homotrema rubrum which has pink to red-colored shells. Living representatives of foraminifera provide ecological data and their mineralized tests are a geochemical record of palaeoclimatic conditions.

SCAPULA

OX: It is a flat, triangular bone situated on the antero-lateral part of the thorax. It is directed obliquely downward and forward. It has two surfaces, three borders and three angles.

The lateral surface is traversed by the scapular spine which divides it into the supraspinous and the infraspinous fossae. The spine is rough and tuberous in the middle and is prolonged downwards to form the acromion process (Fig.2.1). The medial surface presents subscapular fossa and its upper part presents anteriorly a triangular rough area and posteriorly a rough line (Fig.2.2).

Introduction

There are forty different edible oilseeds which can be used for edible and non-edible purposes. Out of which nine oilseeds are extensively used for edible and non edible purposes. The oilseeds such as groundnut (peanut), sunflower, sesame, soybean, rapeseed-mustard, niger and safflower are generally used for edible purposes and castor and linseed are used for non-edible purposes. Plants are the main source for 71 percent of edible oil. Some oil crops such as groundnut (peanut) and sesame can be used directly as food and edible oil, but others are mainly processed to obtain oil, and oil cake or meal (Hetje, 1989). The oil crops are grown all over the world (Girish Kumar, 2012). Area under cultivation of edible oilseeds in 2020 was 27.14 million hectares. The total production was 33.22 million tonnes with the productivity i.e. yield per hectare of 1025 kilogram per hectare in India (Ministry of Statistics). India is the world’s largest importer of edible oil (Santosha, et. al., 2017) and the import of edible oil in 2020 was 93.37 million tonnes.

Disease Forecasting

Definition

Forecasting involves all the activities in ascertaining and notifying the grower of community that conditions are sufficiently favourable for certain diseases, that application of control measures will result in economic gain or on the other hand, and just as important that the amount expected is unlikely to be enough to justify the expenditure of time, energy and money for control. The above statement made explicit distinction between positive forecast and negative forecast and both have value for growers as well as society in general.

Positive forecast: Employs need based chemical sprays, provides adequate protection to crop and reduces damage to environment.

Negative forecast: Avoids unnecessary chemical sprays, no risk to the crop health and no disruption of environment.

1. Term biotechnology was coined by_____________. (Karl Ereky)
2. Applied use of molecular biology and recombinant DNA technology is _______. (Biotechnology)
3. Bacteria are present everywhere except in_____________. (Distil water)
4. The branch of science dealing with the study of microbes is known as _______. (Microbiology)
5. The unique properties of each amino acid are determined by its particular_____________. (R-groups)
6. Optical isomerism arises from the presence of a/ an_____________ atom. (Asymmetric carbon)
7. In the breakdown of glucose to pyruvic acid,_____________ enzyme catalyses the successive steps. (Eleven)
8. _____________ plants are used to accumulate pollutants from soil thus clears soil from pollutants. (Phytoremediation)
9. _____________ contains only one type of nucleic acid. (Virus)

7.1 Introduction

The rapid population and industrial growth experienced beginning in the middle part of this century has led to spiraling increases in the demand for forest wood. Historical data reveal that there was a 159.6% increase in overall wood production between 1970 and 1993. Wood is defined simply as wood in the rough, and includes trees felled for any purpose. The majority of total wood production has been for use as fuel wood and charcoal, much of which is harvested by villagers, and to some degree urban squatters.

Since 1970, there has been a 160% increase in fuel wood and charcoal production. The largest portion (104%) occurred between 1970 and 1980, which may be attributed to the introduction of fuel wood species earlier, during the Second Five Year Plan period. Looking at the decades to come, the demand for fuel wood is likely to continue growing in pace with future increases in population, which is growing at the rate of 24 % per decade. It is estimated that by the year 2010, demand for fuel wood and charcoal will exceed 33 million cubic meters (FAO, 1993). Since there is expected to be little further change in the area under potential productive forests, there will be an increasing probability of a shortage of wood production in India (Planning Commission, 1992).

1. _____________ is the main source of energy for the earth. (Sun)
2. The major cause of ‘Minamata’ disease in Japan was due to pollution by_____________. (Mercury)
3. _____________ method in water analysis is used for the quantitative estimation of dissolved oxygen. (Modified Winkler’s method)
4. Systematic scientific study of fresh water ecosystem is called as_____________. (Limnology)
5. The Earth Summit held in 1992, was organised at_____________. (Rio de Janeiro)
6. The altitude of troposphere in atmosphere is about_____________ kilometre. (Upto 11 km)
7. Bhopal gas tragedy took place in the year_____________. (1984)
8. The unit of noise pollution is measured in_____________. (Decibel)
9. Most important mitigation strategy for reducing global warming and climate change is _____________. (Carbon sequestration)

1. An imaginary line joining the points of equal elevation on the surface of the earth represents_____________. (Contour lines)
2. The vertical distance between consecutive contours lines is called_____________. (Contour interval)
3. When measured with a compass, the line of sight that run midway between due North and due West has a bearing of_____________. (N 45 degree W)
4. A survey of a large area which consider the earth’s curvature is called a _____________ survey. (Geodetic)
5. The distinctive feature of topographic maps is the_____________ of the land. (Shape or Contour)
6. The colour used to depict fence lines and important roads on a topographic map is _____________ and_____________. (Red and black)
7. A surveyor’s chain is divided into links and each link is_____________ long. (0.66 feet)
8. A body of water on a topographic map is presented by_____________ colour. (Blue)
9. On a topographic map a ploughed field would be sown as_____________ colour. (White)

1. The Indian Institute of Forest management is located at_____________(Bhopal)
2. First forest policy in independent India was enacted in_____________(1952)
3. A plan of operations for the management of the forest is known as_____________. (Working plan)
4. _____________ are the yields harvested as a matter thinning operation. (Intermediate yields)
5. Indian Wildlife Protection Act was enacted in the year_____________.(1972)
6. The present National Forest Policy envisages having_____________percent of forest and tree cover. (33%)
7. Forest conservation act was enacted in the year_____________. (1980)
8. Indian forest act was enacted in the year_____________. (1927)
9. Density of tree in a forest stand is normally expressed as__________________________. (Basal area of the stand in square feet.)

Mensuration is derived from Latin word mensura which means measure. It means measurement of length, mass, time, etc. It is an art and science of locating, measuring and calculating the length of lines, areas of planes, and volumes of solids.

Forest mensuration is one of the most fundamental disciplines within forest and related sciences. It concentrates on trees and forests or potentially forested locations and deals with the measurement of trees and stands and the analysis of the resultant information. Forest mensuration also includes measuring or calculating growth and change in trees and forests. Forest mensuration thus may be defined as the art and science of providing the quantitative information about trees and forest stands necessary for forest management, planning and research. Chaturvedi and Khanna (1986) defined forest mensuration as a branch of forestry which deals with the determination of dimensions (diameter, height, volume, etc.), form, age and increment of single trees, stands or whole woods, either standing or after felling. According to the Society of American Foresters, forest mensuration is the determination of dimensions, form, weight, growth, and age of trees individually or collectively, and of the dimensions of their products (Helms, 1998). It is a tool that provides facts about the forest crops or individual trees to sellers, buyers, planners, managers and researchers.

Forest mensuration provides quantitative information regarding forest resources that will allow making reasonable decisions on its density, use and management. Forest mensuration serves the following objects

1.      Callipers are used to measure_____________. (Diameter)

2.      Biltmore stick is used to measure_____________. (Diameter)

3.      Wedge prism with 5 BAF and tallied 50 numbers of trees/ acre then basal area per acre is_____________ __________. (250)

4.      A ring count is most accurate in aging tree by using increment borer on _____________ of the trunk. (Lower region)

5.      False ring is a/an_____________ ring for a given year. (Second)

6.      A formula to determine diameter quotient for each form class is called_____________. (Hojer’s formula)

7.      The instrument used to determine the age of a tree is_____________. (Pressler’s increment borer)

8.      _____________ ,_____________ and_____________ are the variables required for general volume table preparation. (Diameter, height and form)

9.      The sampling method used in non-random sampling are_____________ ,_____________ and _____________. (Selective, Systematic and Sequential)

10.  _____________ formula is used for determining increment per cent. (Schneider’s)

1. The process of harvesting, conversion and disposal of standing forest produce is called _____________. (Forest utilization)

2. Palmarosa grass oil is known as_____________. (Geranium Oil)

3. Terminalia chebula fruit tans is commonly called as_____________. (Myrobalans)

4. The gum resin_____________ is obtained from Garcinia morella. (Gamboges)

5. Black dammer is_____________. (Canarium strictum)

6. Rock dammer is_____________. (Hopea odorata)

7. White dammer is_____________. (Vetaria indica)

8. True dammer is_____________. (Agathis loranthifolius)

9. The Indian copal tree is_____________. (Vetaria indica)

10. The Indian gum arabica or babul gum is obtained from_____________ species. (Acacia nilotica)

1. Life history of Indian termite was first published by_____________. (J.G. Koeing)
2. Plant disease written by_____________. (R.S. Singh)
3. J. W. Helfer seems to have the first to collect insects because these were pest of trees during the year_____________. (1810)
4. The largest insect order is_____________. (Coleoptera)
5. Project directorate of biological control is located at_____________. (Bangalore)
6. Main skeletal structure to which most of the muscle attached is_____________. (Thorax)
7. The outmost waxy layer of insect body is called_____________. (Cuticle)
8. Insect body consists of series of segment designated as_____________. (Sclerite)
9. _____________ is the author of the book entitled “The ecology of forest insect”. (CFC Beesom)

The process of replacing the existing mature forest with a new generation of the forest trees is called forest regeneration. It can also be defined as process by which new tree seedlings become established after forest trees have been harvested or have died from fire, insects, or diseases. Forest regeneration is one of the basic tasks of foresters. Regeneration plays such a prominent role in silviculture that most silvicultural systems are named for their method of regeneration.

Abstract

Forests are the second largest land use after agriculture in India covers around 24% of the geographical area. The key tree species like Teak, Sal, Shisham etc are commonly used for timber purposes however the species like Eucalypts, Acacias, Poplar, Melia and Leucaena are mainly used under agroforestry system in India. The most of the genetic material (seed/planting stock material) used in forestry sector in India is obtained from unspecified sources, from stands, natural or planted, which are neither classified nor managed specifically for seed or planting stock material production.