eChapters

Estimation of variance is primary for any breeding program as all the genetic parameters are dependent on these estimates. The properties of an estimate, their assumptions, type of data, availability of data, and computational requirement make it important to understand the method of estimation of variance components so as to make a wise choice that would suit the breeder’s requirement. This chapter explains the methods of estimation of variance with merits and demerits of each and the reader could use these as a guide to choose the right method of estimation.

The genetic parameters are the basis for any animal breeding program and the important parameters such as heritability, repeatability and genetic correlation are ratios of (co)variances and their reliability depends on the accurate estimation of variance components. Estimates of variance components are used extensively in animal breeding.

Definitions of Energy

Energy is a key topic in science and technology, as well as in society in general. In terms of energy, a typical definition found in popular literature as well as textbooks is “energy is the ability to do work” or, much more precisely, “energy is the capacity of a system to do work” [Atkins 1990].

Energy is described as the ability to generate change or carry out work, and that work can be separated into numerous easily identifiable tasks: Energy produces light, heat, motion, sound, growth, power and technology etc.

7.1. What is Energy Conservation?

In order to protect resources for future use and to lessen environmental degradation, energy conservation refers to actions performed to limit energy use.

.2. What is Energy Efficiency?

The definition of energy efficiency is the use of less energy to carry out a task or achieve a goal. Homes, buildings, and manufacturing facilities that use less energy to manufacture things require less energy to heat, cool, and operate appliances and electronics.

Abstract

This chapter examines natural resource economics, a multidisciplinary field that studies how economic and ecological systems interact to allocate natural resources on Earth. These resources, which include both human and nonhuman factors of production, are essential for the provision of goods and services. The chapter also explores the challenges of valuing and managing natural resources without market prices, and the implications for the sustainability of the food supply.

Abstract

Enzyme is a highly efficient catalyst that is produced by active cells. When compared to chemical catalysts; enzymes have a number of benefits, including high specificity, high catalytic efficiency and flexible activity, all of which greatly help to promote their use in the pharmaceutical, chemical, and food sectors. The majority of enzymes such as protease, amylase, lipase and cellulase are relatively unstable and industrial uses are frequently restricted by a lack of long-term operational stability as well as the technically challenging recovery process and ruse of the enzyme. Enzyme immobilization provides an excellent base for increasing enzyme availability to the substrate with higher turnover over a long period of time. Enzyme immobilization are done by several methods and their performance are influenced by many factors. Physical and chemical based immobilization are the most commonly used methods. The matrix immobilizes the enzyme by holding it permanently or temporarily for a short stretch of time. The generally used matrixes for immobilizations includes natural, synthetic polymers and inorganic compounds.Currently, synergistic interactions of biotechnology and nanotechnology are useful for the development of immobilized enzymes. Enzyme immobilization is a commonly used technology in a variety of industries including food, pharmaceuticals, bioremediation, detergents, and textiles due to technical and economical advantages. This chapter focuses on most commonly used immobilized techniques in industry with many recent applications of immobilized enzymes.

Introduction

Pollination is a process in which pollen grains are transferred from male gametes to the female gamete, thereby enabling fertilization and reproduction through growth of the pollen tube and eventual release of sperm. Fertilization is the union of the egg and sperm. In plants, this may happen after pollination; however, pollination doesn’t always result in fertilization. Fertilization occurs when the pollen grains germinate on the stigma and grow in the style. Reproduction is the process to produce offspring by fusion of male and female gametes, which simply means that the sperms of the pollen unite with the ovules in the ovary of the flower and subsequently produce seed. Flowers may facilitate out-crossing (fusion of sperm and eggs from different individuals in a population) or allow selfing (fusion of sperm and egg from the same flower). Some flowers produce diasporas without fertilization (parthenocarpy).

3.1 Introduction
Irrigation efficiency evaluates how effectively the water has been distributed for the purpose of crop production. Water is conveyed to crop field through canal water courses and channels. During this process considerable amounts of water get lost through run off, deep percolation, evaporation, etc. The losses of water greatly depend on the skill of the irrigator, degree of land preparation, and design and planning of the system. The extent of water losses starting to diversion of water from its source to crop field though conveyance and ultimate application and distribution of water in crop field which can be estimated separately. The estimation of these efficiencies enables one to identify the step(s) where improvement is required. The method of measurement and evaluation for its efficiency is prerequisite for proper use of water. Irrigation efficiency in developing countries in general is poor particularly in gravity irrigation methods. However, water is become more and more scarce. Due to pressing need of it judicious and efficient management is one of the vital issues to be solved on priority basis.

Entrepreneurship plays a vital role in driving economic growth, and its significance in the agriculture and allied industry cannot be overlooked. As the backbone of many economies, agriculture and its allied sectors provide employment to a significant portion of the global population. In this chapter, we will delve into the concept and overview of entrepreneurship in the context of agriculture and allied industry, exploring its definition, nature, characteristics, and the need for entrepreneurial skills. We will also highlight the benefits of being an entrepreneur in this sector, discuss the different types of entrepreneurs, provide relevant statistics and case studies, and touch upon the factors affecting entrepreneurial behaviour. Additionally, we will examine the current trends and forecast for the next three years in the agricultural entrepreneurship landscape and examine relevant statistics and case studies and shed light on the government’s role in promoting entrepreneurship in the Indian startup ecosystem.

Blockchain technology has emerged as a revolutionary solution in various industries, and agriculture is no exception. By providing a secure and transparent system for recording and verifying transactions, blockchain has the potential to transform the agricultural sector. In this chapter, we will explore the role of blockchain in agriculture, its benefits, and various use cases that demonstrate its potential. Additionally, we will present key statistics and real- world examples to illustrate the impact of blockchain in agriculture.

Modern farming system was aimed to maximise crop production by use of high yielding crop varieties or hybrids and application of agro-chemicals like fertilisers and pesticides along with irrigation and better crop production technologies. But without consideration of its impact on the environment and economics of the farmers, the monoculture of rice and wheat with agro-chemicals caused land degradation, soil and water contamination, gene erosion and environmental pollution.

Natural resources are naturally occurring resources which can be exploited for economic gain. They include raw materials such as fuels, minerals and metals, soil, water, air, sunlight, land, biomass and ecosystems. Natural resources also include living (biotic) and non-living (abiotic) materials. Natural resources are gifts of nature for the humankind.

Aeration is the addition of oxygen or air containing oxygen to water. Any aquatic species important for commercial purpose requires oxygen. Even photosynthetic plants need oxygen when it is dark.

2.1 Need of aeration

Rise in atmospheric temperature causes increased rate of biological degradation of organic matters and subsequent depletion in dissolved O₂ concentration in water.

The parent material to which a coating or plating is applied is known as the base material. The phrase base material is used to distinguish the overall part, numerous layers, and the original base material. Coating, electroplating, welding, and soldering all depend heavily on base materials.

Integrated farming places a strong emphasis on the fundamental functions of agro-ecosystems, balanced nutrient cycles that are adapted to the demands of the crops, the health and wellbeing of the farm’s livestock, and a holistic management strategy that sees the entire farm as one connected system (Kochewad et al. 2017). Family farming, often referred to as integrated farming, provides the opportunity to profitably utilize the farm family’s available labor to the fullest extent throughout the year, leading to an increase in income and family contentment.

Electricity is one of the fundamental phenomena of nature. Electricity or electric current is caused due to the movement of charged particles i.e., electrons. Due to the potential difference between two points in a conductor, electron movement takes place. The potential difference between two points is caused due to the difference in charge density. Electron tends to flow from lower potential to higher potential which causes electricity to flow. In general, the electrons flow from cathode (negative) to anode (positive) but in a wire electricity, electrons flow from anode to cathode when connected to a battery or any electricity source.

Enzymes (biological catalyst) can be defined as a substance which initiates or fastens the reaction rate, without being consumed during the reaction. Enzymes function as a catalyst in various biological processes taking place in all life forms. Although enzyme synthesis takes place inside living cells, they can even function as a catalyst in the in vitro processes, which makes it suitable for many industrial applications. For product formation in any chemical reaction, reactants or substrates has to overcome the transition state.

The two limbs of Arabian Sea and Bay of Bengal form parts of North Indian Ocean (NIO) on the left and right respectively. Though the Arabian Sea and the Bay of Bengal are located in the same latitudinal belt and receive the same amount of solar radiation, oceanographically these two basins exhibit remarkable differences. The reason for it is Bay of Bengal is shallow and less saline due to heavy river water discharge and Arabian Sea is deep and cold and more saline.

The general distribution of density in the oceans is like a two layer ocean as shown in Fig.5.1 below. A layer of more or less uniform density (nearly vertical) near the surface called as isopycnal layer and a deeper layer of higher density below with sharp increase of density is called as pycnocline.

The following scientists greatly contributed to the wind driven circulation. Out of all Ekman, Sverdrup, Stommel and Munk are most important and ever remembered for their work. So in the following pages discussion is mostly concentrated on these four scientists theories.

Worldwide, various biopesticides have been created and are in use, including viruses, microorganisms (bacteria, fungi, etc.), microorganism derived products, animal derived goods (pheromones, hormones, insect-specific toxins, etc.), plant derived products, and genetically modified organisms (Nicholson 2007; Erlandson 2008; Mazhabi et al. 2011; Islam and Omar 2012).

The single piece of legislation under the Indian Government that regulates the import, manufacturing, sale, transportation, distribution, and use of all varieties of insecticides, including biopesticides, is the Insecticide Act (1968). Various parameters like shelf life, cross-contamination, moisture content, and packaging are significant factors that must be addressed before a biopesticide is registered. According to Organization for Economic Co-operation and Development’s (OECD) recommendations, CIB simplified the protocols and listed the infrastructure needs for manufacturing of biopesticides. Information required to generate toxicity calls a strenuous effort.

All living organisms need to reproduce in order to maintain their species and improve the economics of animal husbandry. Since the beginning of time, different methods of successful reproduction have been created, including artificial insemination and in vitro fertilization. To shield sperm from damaging elements like freezing, osmotic shock, oxidative stress, and cell damage by ice crystals, semen extenders were developed. Semen extenders maintain sperm’s characteristics, such as its morphology, motility, and viability as well as its membrane, acrosomal, and DNA integrity. To improve semen quality for fertilization, semen extenders must offer a suitable pH, adenosine triphosphate, anti-cooling and anti-freeze shock, and antioxidant activity. As a result, this compilation of research offers exact information on various semen extenders, preservation mechanisms, and crucial semen extender additions in goats. By incorporating various types of additives in semen extenders for cryopreservation, significant improvement is reported in post thaw sperm quality in terms of increased % motility, viability, PMAI, MMP and reduced DNA fragmentation, capacitation like changes reflected by less CTC pattern B and AR, Tyrosine Phosphorylated pattern A, E and AE.

Learning outcome

In this exercise we will learn about handling of:

1. 18-135 mm lens
2. 70-200 mm zoom lens
3. 8.3.5 mm DSLR lens
4. Babylight
5. Computer
6. DSLR camera
7. Field recorder
8. Mic rod
9. Power adaptor
10. Projector
11. SD card 32 GB
12. Speaker
13. Tripod
14. Projector screen

This chapter deals with some important terms and their concepts related to the study which are essential to convey the ideas of the study effectively and also to provide a theoretical base for the empirical investigation and guidance for the selection of relevant predictor variables.

3.1 Human Happiness and Estimation

A state of mental or emotional wellbeing known as happiness is characterized by pleasant or good emotions, which can range from contentment to ecstatic delight. Happy emotions can also be a reflection of how someone feels about their general well-being.

Research methodology is a detailed plan of investigation and the blueprint of procedure for carrying out the research. In this chapter, a discussion on the methodology has been made to understand the concepts, methods, and techniques, which are utilized to design the study, collect information, analyze data and interpret the findings for the revelation of truth and formulation of theories. The entire chapter has been broken up under the following sub-heads for easy understanding:

1. Locale of research
2. Sampling design
3. Pilot study
4. Variables and their measurements
5. Methods of data collection
6. Statistical tools used for the analysis of data

Urinnalysis An essential laboratory test that is easily conducted in veterinary settings and is included in a basic database is urinalysis. Documenting diverse urogenital tract conditions is helpful, because it could reveal details about other systemic conditions including hemolysis and liver failure. Cystocentesis, urethral catheterization, or simply voiding can all be used to collect urine. Urine should be examined within 30 minutes, but if this is not possible, it can be refrigerated for up to 24 hours or sent to a outside diagnostic lab; this, however, may cause crystal precipitation. The pH or specific gravity of urine are unaffected by refrigeration. Preservative should be added if cytologic analysis is necessary and a delay in slide preparation is anticipated. A few drops of 10% formalin (exact concentration not necessary) are better than boric acid

Climate change refers to a change of climate that is attributed directly or indirectly to human activity that alters the composition of the global atmosphere and that is in addition to natural climate variability observed over comparable time periods (FCCC).

Overall, climate change could result in a variety of impacts on agriculture. Some of these effects are biophysical, some are ecological, and some are economic, including:

• A shift in climate and agricultural zones towards the poles
• Changes in production patterns due to higher temperatures
• A boost in agricultural productivity due to increased carbon dioxide in the atmosphere
• Changing precipitation patterns
• Increased vulnerability of the landless and the poor

Plant breeding or crop plant improvement is one of the oldest accomplishments of man. It began when he domesticated plants by growing them under controlled conditions and selecting those types that suited to his food requirements, about 10,000 years ago. As settlements improved, men could find time to innovate agricultural practices and to have better selections. Thus, domestication of plants and animals marked one of the most important phases in man’s progress from a nomadic and highly individualistic life to the organized and cooperative society. All our food crops as we know them now are the direct results of this primitive agriculture. This early phase of plant breeding was haphazard and slow based on selection of desirable types from the availability variability and it largely remained an art and not a science until Mendel’s laws were rediscovered in 1900 and applied to plant breeding at the beginning of 19^th century. 

Common Name: Ganth gobhi or kadam

4.1 Introduction

Knol khol or kohlrabi is not very widely grown in our country except in Kashmir, West Bengal and some of the South Indian states. Kohlrabi is a herbaceous biennial grown for its edible stem. The edible part in kohlrabi is the tuber formed by the thickening of stem tissue above the cotyledons, i.e., swollen stem called knob or tuber. 

1. Introduction

Energy balance means keeping an account of how the flow of energy is taking place in and out of any system or process. It helps the engineers to estimate the total energy requirement and identify the area for conservation of energy in any process. In food processing the concept of energy balance is applicable in unit operation such as blanching, drying, evaporation, freezing, refrigeration, distillation, crystallization. The scopes of energy balance in food industry are:

i) Streamlining and reduction of energy consumption in the existing process.

ii) Selection and sizing of any equipment and process.

iii) Economic analysis of alternate process/technology.

iv) Designing new economically viable process/technology

Introduction

A sheet metal shop is a kind of workshop where different types of materials are used to make sheet metal and then it is flattened into thin sheets of desired shape and size. Sheet metals are used for the production of automobile bodies, utensils, almirah and cabinet appliances, etc.Sheet metal parts have many advantages, like they are less expensive, lighter in weight and can be modified into versatile shapes. Low-carbon steel is commonly used. The use of casting and machining is being replaced by metal stamping. The stamping press is a kind of machine tool in which most of the operations occur, and the sheet metal products which are obtained by the machine are called stampings.

Introduction

Agriculture plays a vital role in India’s economy. Over 58% of the rural households depend on agriculture as their principal means of livelihood. As per the 2^nd advanced estimates by the Central Statistics Office (CSO), the share of agriculture and allied sectors (including agriculture, livestock, forestry and fishery) is estimated to be 17.3% of the Gross Value Added (GVA) during 2016- 17 at 2011-12 prices. The GDP of agriculture and allied sectors was recorded at $244.7 billion in FY 2016.

Principal Scientist and I/c Head, Division of Social Sciences and Training, IIHR, Hessaraghatta Lake Post, Bangalore – 560 089, Karnataka

The business plan answers the key questions about the business: who, what, where, when, why, and how. For a developing business, it begins the process of making an idea materialize into reality and determining whether or not an idea should become reality. It also establishes goals and benchmarks for the business. A comprehensive business plan makes it easier for a business to receive external support, especially in terms of financing from potential investors, lenders, and grant sources. Finally, and possible most importantly, going through the process of planning is very valuable because it forces the business owners and/or managers to think through every detail of the business.

Introduction

Conventional practises of raising livestock had been practised for several years on a worldwide basis to satisfy the protein needs. Increasing human population, income growth and increase of urbanization, pressurizes serious demand on the quantity and attribute of livestock products. The feed stuffs such as maize, soya, groundnut, etc. used in livestock especially for poultry possesses a great competition for human food.

Introduction

The Indian poultry industry has emerged as one of the fastest growing segments in the Agriculture Sector, contributing significantly to the national GDP. The 20^th Livestock Census in 2019 estimated the total poultry population in the country at 851.81 million with an increment of about 16.8 % over the last one in 2012. The Indian poultry industry is annually growing at around 6.0% for the past four decades and is expected to touch 1066.2 million by 2030. The Per capita availability of meat and eggs is expected to increase accordingly so as to meet requirement projections made by the National Institute of Nutrition (NIN), by the year 2031. 

Introduction

Improvement of growth rate and feed efficiency through formulating effective diets are mostly considered for its effect on gut health. Several factors need to be well thought-out such as genetic makeup of the birds, feed source and quality, environmental condition and disease incidence. Apart from these factors, maintenance a good gut ecosystem or enhancement of it is essential for the welfare, optimum performances and productivity of birds. 

Introduction

Over the years, antibiotics have been used at sub therapeutic levels for enhancing the production and immunity of birds. The advantages of using antibiotics as feed supplements in terms of improvement of growth and feed efficiency have been well documented. However, the growing concern over the transmission and the proliferation of resistant bacteria via the food chain led to a ban on the use of antibiotic growth promoters (AGP) in livestock within the European Union in 2006.Thus, quest for alternatives to AGP gained momentum in the first decade of this century. There has been emergence of various feed additives like prebiotics, probiotics, organic acids, enzymes, essential oils, fatty acids, phytobiotics etc. Feed additives are used in to elicit the production performance and health of chicken.

Introduction

The Indian poultry industry has emerged as the most dynamic and fastest expanding segment in animal husbandry sector with an annual growth rate of 23% in broiler chickens and 5% in egg production. The production performance of birds in terms of meat and egg has also improved significantly; however, the sector has crippled many times due to various reasons among which the important ones were rising feed cost, non-availability og feed ingredients, fluctuating market price of produce (eggs and broilers) and emergence of new or re-emerging of existing diseases. In future, poultry industry may face more such challenges.

8.1 Introduction

Biogas is produced by the anaerobic digestion of biodegradable materials with the help of microorganisms. Biogas is also considered as renewable energy source because of is environment friendly nature. Conversion of cattle dung, kitchen wastes and agricultural wastes into biogas have the potential to minimize the burden on the fossil fuel and reduce the environmental pollution. Majority of developing countries specially their rural and suburban areas faces lack of access to the electricity and cooking gas. Biogas technology is emerging as a sustainable technology for waste treatment which could help to tackle the waste disposal issue in developing countries. 

Rural Indian women are extensively involved in agricultural activities. In rural Uttarakhand, women contribute about 90 per cent of the total work in agriculture and animal care. Women’s participation rate in the State’s economy is much higher than in several states and the national average. In Uttarakhand, women’s role ranges from managers to landless labourers. Women’s average contribution is 55% to 66% of the total labour in overall farm production, with percentages higher in certain regions. From a demographic perspective, nearly 17% of households are women, higher than the national data (~11%). The main reason for this shift is migration other than divorce, separation or widowhood.

ountains occupy twenty-four per cent of the global land surface area (about 25 million km²) and are home to twelve per cent of the world’s population (GTOS, 2008). Water is present in snow, glaciers, wetlands, and rivers in the mountains. They supply watersheds by providing groundwater recharge to hill communities and communities living in vast basin areas (Hua, 2009). Whatever happens in these mountains affect nearly 1.2 billion people, one-fifth of the world’s population living in the river basins, and up to three billion indirectly in food and energy production. Despite harbouring some of nature’s richest natural resources, mountains are home to some of the world’s poorest people, many of whom are marginalized subsistence farmers. These communities living in the mountain region have hardly benefited from the ‘green revolution’ and global economic growth.

Introduction

About 65 percent population of the country is living in the economically undeveloped area. Therefore, many evils such as illiteracy, superstitions, unhealthy practices etc. took roots in our country. After Second World War or after independence, it was thought to settle all these problems properly and so, many development programmes were reinvigorated. It is wrong to declare that there was nothing done during slavery period. However, those works, which were executed at that time, were very few in number according to the needs. Looking at a vast country like India, during British rule some selected social workers had started some programmes of rural development. The evolution of extension programme is described in two stages.

Introduction of Training and Visit System

This Training and Visit system was developed by World Bank Expert Daniel Benor. Initially (13) Major states in India adopted Training and Visit system but later on most of the states are practicing this system since 1984 onwards.

10.1. Introduction

When it comes to packaging, plastics are still popular because of durability, versatility, economic production, and enhanced mechanical properties. However, with growing concerns about the impact of plastics-based packaging on the environment, edible and biodegradable packaging were introduced. The application of edible and biodegradable packaging promotes renewable resources, which greatly reduces environmental concerns and fulfil the packaging requirements. The sources employed to develop edible and biodegradable packaging are mainly plant-based biopolymers like cellulose, proteins, starch, and lipid. Moreover, the properties of the packaging material are decided by the proportions of these biopolymers. Hence, selecting a food commodity to be package is equally important as selecting suitable resources for the development of edible and biodegradable packaging.

12.1. Introduction

Food Packaging is a means to ensure safety and quality of food product throughout storage, transportation, handling, distribution, retailing, sales and in some cases till the intended use. International trades in food are generally guided by Codex Alimetarius Commission (CAC) (A joint body of World Health Organization and Food & Agricultural Organization). CAC works in harmonization within the context of food standards, food packaging and the applied rules. The mandate of Sanitary and Phytosanitary Measures (SPS Agreement) and Agreement on Technical Barriers to Trade (TBT Agreement) is to facilitate food trades and remove restraints at possible extent. Through these agreements, member countries have provision to apply quality and safety measures to safeguard the consumer. Such measures extend to every aspect of food and its packaging. On the other side, food packaging industries also progressed with sound technological advancement and sophistication in the last three decades. Innovations in food packaging attracted consumers due to convenience, availability, safety, quality and preservation throughout shelf life of the food product. 

9.1 Geospatial Technology

It is an organized collection of computer hardware, software, geographic data, and personnel. It is designed to efficiently capture, store, update, manipulate, analyze, and display geographically referenced information. It includes typical Geographic Information System (GIS) software packages (ArcGIS, ArcExplorer, MapPoint, Google Earth), Remote Sensing (Collecting and interpreting information about the environment from a distance using satellite imagery, radar, or aerial photography), Global Positioning Systems (GPS) (A system of radio-emitting and receiving satellites used for determining positions on the earth) and many others (Lisa Kennaway, 2009). Geospatial technology can be used in pest monitoring and detection, data visualization/query, survey data collection, management and analysis, risk and pathway analysis, change detection and many others.

The coastal salt affected soils are low in productivity due to various soil fertility constraints that affect the crop growth and yield. The high salt content &/or high pH cause changes in solubility, availability and efficiency of plant nutrients, besides deteriorating the physical condition of soil. The soil biology (microbial population and enzymatic activities) also severely affected in these salt affected soils. The bio-resources are known to improve soil physical, chemical & biological properties of the soil. The maximization of rice production and considerable improvement in quality and composition of rice in coastal salt affected soil with the use of bio-resources have been reported by several research workers.

Introduction

The microbial cells of bacteria, actinomycetes, fungi, algae and protozoa are visible by light microscopy. Beyond the resolution of light microscope are the unique organisms that are sub microscopic and intracellular parasites known as viruses. The term virus is a Latin word means poisonous substance. The viruses are functionally and metabolically different from the cellular organisms as (i) they are infectious agents and contain only one type of nucleic acid encapsulated in a protein coat. Some may possess membranes but do not have any cytoplasm or metabolism of their own. (ii) They are much smaller in size than the smallest bacteria and can pass through bacteriological filters.