eChapters

Abstract: Water lily, bulbous ornamental, constitute element of aquatic gardens. A variety of flower colour, flower forms, modes of reproduction and leaf sizes exist in Nymphaea. This species is a complex hybrid group. A wide range of polyploidy (including aneuploidy, trisomy, polysomaty), polymorphism and heterozygosity exists within the cultivars of water lily. Genetic information and trait heritability is almost unknown for this crop. Breeders have created synthetic water lily hybrids. Low fecundity, limited fertility, reproductive barriers, low seed set, relatively low elemental (founding) species among elite germplasm often pose significant challenges to flower breeders. Breeding objectives with high priority include tolerance to drought, year round flowering and lower seed tannins. Future breeding and genetic studies are needed to further transform this crop.

Keywords: Nymphaea, correlation, sterility, interspecific hybridization polyploidy.

Abstract: Zinnia, multipurpose ornamental annual is noted for its garden performance. The uses of zinnias range from dwarf cultivars used for containers, borders or edging, bedding to tall cultivars used for cut flowers. Breeders and seed companies successfully introduced hybrid cultivars in the mid 20^th century. Some modes of inheritance of floral doubleness, floral colour, male sterility, self incompatibility, leaf morphology, disease resistance have been discussed/ clarified; research succeed in interspecific hybridization, polyploidy, mutation breeding and seed production are presented. Somaclonal variation for generating mutants has created new horizons in zinnia breeding. Important traits for both production and landscape use include flower colour and bloom time, plant habit and form, seed germination, disease and virus susceptibility.

Keywords: Breeding, cytology, inheritance, polyploidy, F₁ hybrids, seed production.

1. IMPORTANCE

India is bestowed with a varied agro-climate, which is highly favourable for growing a large number of horticultural crops such as fruits, vegetables, root tubers, ornamentals, aromatic plants, medicinal herbs, spices and plantation crops like coconut, arecanut, cashew and cocoa. It has emerged as an indispensable part of agriculture, offering a wide range of choices to the farmers for crop diversification. It also provides ample opportunities for sustaining large number of agro-industries which generate substantial employment opportunities. India has emerged as the second largest producer of fruits and vegetables; with largest producer of coconut, arecanut, cashew, ginger, turmeric, black pepper and tea, among plantation crops.

The changing scenario encourages private investment, to go for Hi-tech Horticulture with micro-propagation, protected cultivation, drip irrigation, fertigation and integrated nutrient and pest management, besides making use of latest post harvest measures particularly in the case of perishable commodities. As a result, horticulture crop production has moved from rural confines to commercial ventures and has attracted youth since it has proved to be intellectually satisfying and economically rewarding. It is essential to appreciate the contribution of horticulture, landscaping and gardening in the hospitality industry. Aesthetic use of horticulture freshens up the atmosphere, enhances the look of the property and creates a lasting impression on guests. It also has a beneficial effect on the health.

1. INTRODUCTION

Fruit production is not only the growing of fruit plants but it is an outcome of well planned orcharding system. The designing of an orchard for successful fruit production depends upon various physical as well as climatic conditions and resources which help in building up of fruit growing systems. An orchard is a long term investment, mistakes committed at initial stage of planning, selection of site and soil reduces the return greatly from investment, beside wastage of time and energy. Thus, a faultless planning with utmost care and attention become quite imperative while planning a new orchard.

2. PLANNING OF ORCHARD

Before undertaking the actual planting of fruit trees, it is advisable to plan the complete process/steps, which will enable the grower to provide not only the most economic orchard management, but also for the economic layout and location of roads, drains, irrigation channels, hedges and wind breaks. For establishing an orchard of fruits, the major consideration must be given to four important aspects like climate, site or location selection, soil condition and basic facilities (economic and market consideration).

1. IMPORTANCE

Nutrients are known to influence each and every physiological process within plant system. A considerable amount of various nutrients has been reported to drain off every year with the yield, pruning wood and fallen leaves from the plant and soil system. Therefore, for successful fruit culture, assessment of nutritional status of an orchard assumes significance. The key to mineral nutrition of any orchard is the judicious application of fertilizers on the basis of leaf and soil analysis. The nutrients requirements of fruit trees may vary from crop to crop and includes the soil as well as foliar application of the required major and micro-nutrients. Low level of nutrient results in low yields which are much below the realizable potential. There are a number of reasons why better nutrient management in horticultural crops deserves serious attention. The nutrition management of fruit crops is important:

1. To obtain higher yields and higher returns.
2. To increase the returns from established orchards.
3. To help improving the nutritional standards of the people by providing adequate supply of fruits and vegetables at affordable prices.
4. To provide greater and better quality raw material for fruit and vegetable processing industries, and
5. To help earning foreign exchange through the export of high quality produce in fresh or processed form.

1. INTRODUCTION

Nursery management is the backbone of fruit industry. The nurseries will have to play vital role in planned work for increasing the area under orchard. They are indeed the hub on which the success of an orchard depends. It provides continuous supply of healthy and certified planting material. So, one should give utmost attention while raising fruit plants.

The fruit plants are the foundation on which an orchard is built. If the plants are reliable and of guaranted performance, they will be high yielding and will produce quality fruits. There are many nurserymen in several fruit belts of the country who multiply thousands of fruit plants vegetatively for sale. It is desirable to raise only reliable, true-to-type, disease resistant and vigorous and precocious plants in order to have success in the fruit development programme in the country. At present there are several research stations and progeny- cum-demonstration orchards, Govt nurseries and also private registered nurseries engaged in the propagation of fruit plants.

Stone fruits like peaches, plums, apricots, almonds and cherries liked by one and all throughout the world for its colour, taste and nutritional value and grown in all part of the temperate zone and lower hill area of the country. The common procedure to raise nursery trees is to grow rootstocks from seeds or cuttings and then to bud known suitable varieties upon them. The stone fruits do not come true- to-type when raised from seed and therefore, nursery plants are generally raised through vegetative methods of propagation either on their own roots by cuttings or layering techniques or on the roots of other plants (rootstocks) by budding and grafting techniques. Rootstocks play an important role in quality fruit production. The stone fruits are generally propagated on rootstocks rather than on their own roots to have an advantage of rootstocks, like growth control, precocity, cropping and resistance to insect-pest and diseases.

1. INTRODUCTION

The demand for high quality planting material is steadily increasing due to interest in vegetable gardening. The need of setting up plant nurseries to meet the demands of the people has been felt by small and marginal farmers as well as by gardeners and farm house owners. In order to meet this demand, there is ample scope for introduction of small nurseries which will serve to augment the incomes of needy sections of rural society. Almost all vegetables crops are propagated by seeds, except sweet potatoes, asparagus, garlic, potato etc., which does better if propagated vegetatively. Among the vegetable crops which are propagated by seeds, cucurbits, beans, peas, radish, turnip, carrots and leafy vegetables seeds are sown directly in the fields. Other vegetables like cabbage, cauliflower, tomato, onion, chilli etc. are first sown in nursery beds where seedlings are raised and then transplanted.

1. DEFINITIONS

Propagation : Propagation of plants may be defined as the controlled reproduction of plants by man to perpetuate selected individual or groups of individual plants which have specific value to him or it is the perpetuation of plants as independent units by means of seeds, bulbs, layers, cuttings, or grafts.

• Seed: A seed has been defined as a young plant packed ready to start growing when required.
• Apomixis: Development of seeds without the complete sexual process is known as apomixes and seed produced in this manner is called apomictic seeds.
• Seed dormancy: The embryo of the seed remains in inactive stage from the time of its development to the time it germinates. This failure of the embryo is termed as dormancy of the seed.
• After-ripening: Some seeds germinate fully when freshly harvested, but they germinate after a period of dry storage. The change taking place in such seeds are known as after- ripening.
• Embryo dormancy: Conditions existing within the embryo.
• After-ripening dormancy: Seeds fail to germinate when freshly harvested, but they germinate after a period of dry storage. Such seeds are known as after-ripening dormant seeds. This is due to the physiological changes taking place in embryo.

1. INTRODUCTION

Canopy management is the manipulation of tree canopy to optimize its production potential with excellent quality fruits. In many fruit crops, increase in production with enhanced fruit quality is obtained by managing canopies of short statured trees. Small trees capture and utilize the sunlight properly and results into better fruit production.

The fruit growers desire to regulate the growth and development of their trees in a scientific manner. This is because it is not always wise to allow a plant to develop naturally, since unwanted portions may develop which may affect the production. The removal of unwanted parts of plant is thus known as pruning. The practice of pruning as and when performed in an appropriate manner, keeps the plant in such shape and condition as to yield fruits of desired quality.

Canopy management depends on the nature and growth pattern of plant, number of plants /ha and pruning techniques used by the farmers in their fields. Pruning should be done when trees are young to establish their basic shapes and sizes, and continued as trees mature. Trees that grow too close together shade out the lower canopy portions and in turn decrease their fruit setting. These trees are required to be pruned to allow the light to reach the top and lower sides of trees. Pruning is done either to encourage the growth (thinning) or to reduce the tree size (heading back). Thinning of bearing trees encourages vegetative growth, and removes interior branches, encouraging the outward growth of plants. Heading back reduces the outward canopy growth through topping and hedging of branches.

1. INTRODUCTION

Leaf and soil analysis are the tools to estimate the fertilizer needs of fruit crops. Leaves are selected for analysis because:

• Leaf is the principal site of plant metabolism.
• The changes in nutrient supply are reflected in the leaf composition.
• The changes are more pronounced at certain stages of development.
• The concentration of nutrients in the leaf at specific growth stages are related to performance of the plant.

1. INTRODUCTION

Integrated Nutrient Management (INM) has become a widely practiced Hi-tech horticulture practice. It refers to maintenance of soil fertility and plant nutrient supply to an optimum level for sustaining the desired crop productivity through optimization of the benefits from all possible sources of plant nutrients in an integrated manner. Another important aspect of INM is for enhancing of the fertilizer use efficiency (FUE) by proper placement of fertilizer in close proximity to the rhizosphere of the highest root activity. Today, Integrated Nutrient Management has become one of the common practices among progressive horticulture producers.

INM involves proper combination of chemical fertilizers, organic manures, crop residues, nitrogen fixing crops and bio-fertilizers suitable to the system of land use under ecological, social and economic conditions. INM involves maintenance or adjustment of plant nutrient supply to an optimum level for sustaining the desired crop productivity.

1. INTRODUCTION

Vegetables differ widely from field crops in their requirements for land preparation and cultural practices because of their differences in their morphologies, growth habit, and socio-economic values. In preparing land for vegetable production, ecological location, mode of cropping, season, crop disposition and the type of vegetables to be grown are taken into consideration.

Clearing: It is often necessary to remove the vegetation cover when a piece of land is to be used for vegetable production. The land clearing methods may involve removing the remains of previous crops and undergrowth, cutting back the woody shrubs and trees and burning them.

Levelling: When the site has been cleared, uneven land may have to be leveled. This facilitates the process of ploughing, harrowing ridging and layout of the site.

Land preparation and layout depend on

1. INTRODUCTION

Exotic means anything of foreign origin and something not of native growth. Exotic vegetables are those species introduced to a country or location. Broccoli, Brussels sprout, Knol- Khol, Red Cabbage, Lettuce, Asparagus, Baby Sweet Corn, Chive, Garden beet, Kale, Swiss chard, Parsley, Parsnip, Chinese cabbage and Leek are important exotic vegetables. These generally require cool temperature.

Due to increasing foreign culture and increasing living standards, the demand of exotic vegetables is continuously increasing in cosmopolitan cities and five star hotels. These are good in taste and have high nutritive value. Most of the exotic vegetables can be used in salad and soups. These crops are very remunerative.

In urban areas only few part time grower devote time to the production of exotic vegetable. Exotic vegetable farming is profitable venture that require little capital and become source of livelihood to the farmer. The increase in their output level and profit will contributing to food security in the country. About 50% world population living in the cities. The rapid urbanization poses new challenges for food security. It is hard for most of the cities in the developing countries to provide sufficient employment for rapid increasing population. Some district of Maharashtra like Pune, Nasik & Satara now growing exotic vegetables like asparagus and broccoli. Cherry tomato, leek, lettuce, red cabbage & baby corn are also important as exotic vegetables.

In HP cultivation of Exotic Vegetable like asparagus, broccoli, lettuce, leek, chinese cabbage, snow pea, and parsley start picking up in Theog, Matyana, Saproon Valley, Sirmour, Katrain, Manali, Narkanda & Sanj Valley. These vegetables are beneficial for health as they are rich in phyto-chemicals and neutraceuticals. India is endowed with a wide range of tropical, sub-tropical and temperate agroclimatic conditions, therefore almost all kinds of vegetable crops grown around the world can be cultivated in one or the other corner. There is a lot of potential for exotic vegetables for domestic and export market. Important one are:

1. DEFINITIONS

Various definations of weed have been proposed. Weed is defined as a valueless plant growing wild, especially one that grows on cultivated ground to the exclusion or injury of the desired crop. Weed means any undesirable or troublesome plant, especially one that grows profusely where it is not wanted. The weed have also been defined a plant considered undesirable. Weeds are commonly unwanted plants in human-controlled settings, such as farm fields, gardens, lawns and parks. A weed may be any plant that grows or reproduces aggressively, or is outside its native habitat. Some plants that often are considered to be weeds are Bermuda grass, creeping Charlie, dandelion, golden rod, poison ivy, ragweed, wild carrot, wood sorrel, nutsedge etc.

1. INTRODUCTION

Medicinal plants constitute considerably a large component of natural vegetation. Several of these species are in great demand for domestic consumption as well as for commercial use by the herbal industry. About 800 species are estimated to be in trade with a turnover of Rs.4000 crores per year. This high demand by the herbal industry has put enormous pressure on the wild populations leading to destructive collection of the produce as maximum species of medicinal plants are wild.

A medicinal plant is as any plant which contains substances that can be used for therapeutic purposes or which are precursor for chemo- pharmaceutical synthesis. The medicinal plants are useful as a drug or therapeutic agent, having different medicinal values in form of active ingredient. Medicinal plants may therefore be defined as a group of plants that possess some special properties or virtues which make them important as drugs, therapeutic agents and for medicinal purposes.

Medicines from India are used by about 60 per cent of the world’s population. These are not only used for primary health care not just in rural areas in developing countries, but also in developed countries as well where modern medicines are predominantly used. While the traditional medicines are derived from medicinal plants, the herbal drugs are prepared from medicinal plants only. Use of plants as a source of medicine has been an ancient practice and is an important component of the health care system in India. There are about 45,000 medicinal plant species in India, with concentrated spots in the region of Eastern Himalayas, Western Himalayas, Western Ghats and Andaman & Nicobar Island. India is the largest producer of medicinal herbs and is called the botanical garden of the world. In rural India, 70 per cent of the population depends on the traditional type of medicine, the Ayurveda. Ayurveda and Kabiraji (herbal medicine) are two important forms of alternative medicine that is widely available in India. It is estimated that about 80,000 species of plants are utilized in some form or other by the different systems of Indian medicine. Many herbs and spices are used in Indian cooking, such as onion, garlic, ginger, turmeric, clove, cardamom, cinnamom, cumin, coriander, fenugreek, fennel, ajowan (ajwain), anise, amchur, bay leaf, hing (asafoetida) etc. Ayurvedic medicine uses all of these either in diet or as a medicine.

1. INTRODUCTION

Annuals are the group of plants that complete their life cycle in one season or in one year during which they grow, flower and produce seed; and after this they wither out. A true annual (like zinnia) is a plant that will grow from seeds, flower, produce seeds and die in one season. Zinnias provide a succession of flowers for summer colour in any sunny location with good soil drainage

The term annual when applied to herbaceous ornamentals refers to plants that are grown for only one season. A true annual completes its life cycle (bears seed) in one season and has an extended bloom span lasting (in most cases) throughout the summer. Some plants that we use like annuals in the garden actually are herbaceous perennial plants that bloom the first season but are unable to survive the winter climate.

Some varieties will self-sow or naturally reseed themselves. This may be undesirable in many flowers because the parents of this seed are unknown and hybrid characteristics get lost. Plants will scatter everywhere instead of growing in their designated spot. Examples: Alyssum, Petunias and Impatiens. Impatiens flowers are currently the most popular annuals and are unsurpassed for abundant flowers in a shady garden. Some perennials, which are plants that live from year to year are classed with annuals because they are not winter-hardy and must be set out every year. Examples are begonias and snapdragons.

Typically, the annuals we think are as loving the heat of summer, but there are some popular annual plants that prefer the cool of spring and fall. Examples: pansies, snapdragons, ornamental cabbage and kale. These plants actually grow more lush and vigorous when the weather is cool not hot and dry; therefore, they are often offered for sale in early spring.

1. INTRODUCTION AND IMPORTANCE

Flower arrangement is a very old art. In India, the flowers have been earlier arranged in temples and during festivities. The first rules of ikebana were laid down in Japan more than a thousand years ago. Flowers have been widely used for interior decoration, but they were cut from the garden and simply massed into water-filled containers to brighten the home. The beauty of the display relied upon the blooms themselves rather than the aesthetic appeal of the design. Even at homes and venues of festivals/functions/on auspicious occasions, flowers are used in a big way in the form of garlands, wall hangings, and floor decorations. Flower arrangements grace table tops, window sills, corners, fire places, and so on to suit the occasion.

Flower arrangement may be defined as the art of organizing and grouping together plant materials (flowers, foliage, fruits, twigs etc) to achieve harmony of form, colour and texture, thereby adding cheer, life and beauty to the surroundings.

Various types of arrangements are chosen, as appropriate to the area and occasion. Medium sized ‘round’ arrangements are often provided at the guest relations executives’ desk in the lobby and on coffee tables in the lounges. In most five-star hotels, one can see huge, spectacular arrangements in the loggies. Table arrangements for conferences must be low so that guests may see over them. At informal banquets, large arrangements may be seen. At wedding banquets, wall arrangements using gerberas are very popular, now a days. On special occasions and festivals, a large amount of flowers is required for making up various types of arrangements. The extent to which flowers are used in hotel interiors depends on the degree of luxury provided, the number of special functions held.

The housekeeper is responsible for all flower arrangements and their placement. Simple arrangements such as a bud in a vase can be done. Alternatively, flower arrangements may be provided on contract, in which case the arrangements are brought in and taken away at agreed times and little or no floral work is carried out on the premises. Arrangements like running water, containers, buckets, vases, scissors and flower pots are important.

1. INTRODUCTION

Landscaping is a branch of ornamental horticulture having aesthetic and beautifying value which freshens up the atmosphere, enhances the look of the environment and improves beauty of land. In the area of landscaping, it is beneficial to know about ground covers (grasses etc), hedging plants, and focus plants that will complement one another.

A garden by definition is a piece of land devoted to growing flowers, fruits, vegetables, shrubbery and turf. Gardens brighten their surroundings and they add to the beauty of the landscape. The types of flowers that can be grown in a garden depend on the size of the garden, its location and the amount of sunshine and shade it gets.

I. INTRODUCTION

Horticultural crops include fruits, vegetables, flowers, plantation crops, spices, and medicinal and aromatic plants have emerged as a major economic activity in India. It contributes 30% GDP from 11.73 % of its arable land area. Horticulture crops cover over 23.4 million hectares of area, which is approximately 12.7% of the total gross cropped area of the country and contributes 18-20% of the gross value of India’s agricultural output (NHB, 2013). India is the world’s second largest fruit and vegetable producing country accounting for 77.7 million metric tonnes of fruit and 159.5m M tonnes of vegetables (NHB, 2013). Besides, about 5.66 million tonnes of loose flowers, spices, mushroom and aromatic plants are also produced. The country produces 41% of world mangoes, 23% banana, 24% cashew nut, 36% green peas, 10% onion and 30% cauliflower and accounts for 12% of world fruit and 13.25% of vegetable production (NHB, 2013). Owing to wide diversity of agro climatic conditions, almost all types of temperate (apple, peach, plum, apricot, cherries and nuts), subtropical (mango, guava, papaya, etc), tropical (banana, pineapple etc), arid fruit (ber and aonla), plantation crops (coconut, cashewnut and arecanut) and diverse variety of vegetables are grown in India. The export of fresh fruit and vegetables from India in 2006-07 was estimated at 9.84 Lakh tonnes valued at Rs 2411.70 crores. Mango, grapes, apple, onion, potato, green vegetables like okra, bitter gourd and green chillies were the major items of export. Similarly, India exported 5.97 Lakh tonnes of processed foods comprising of mango pulp, juices, concentrates, dried and processed vegetables, pickle and chutney, alcoholic and non-alcoholic beverages worth Rs 2818.1 crores (APEDA, 2012) (Table 1 to 3).

I. INTRODUCTION

The fruits and vegetables we eat and flowers and ornamentals we enjoy are biological entities. They breath, produce heat, perspire, are easily damaged, get diseases and finally die. These carry on processes characteristics of all living things before or after harvest to perform the metabolic activities:

1. to maintain cellular organization
2. to transport metabolites around the tissue and
3. to maintain membrane permeability.

1. MATURITY INDICES

Maturity indices (right time of harvesting) are quality factors that give clues as to when a product should be harvested to allow marketing flexibility and ensure the attainment of minimum acceptable quality to the user. It also refers to the set of criteria used to determine the stage of maturity for harvesting the horticultural crops. Commodities harvested either pre-mature or too late are more susceptible to postharvest physiological disorders, diseases and have poor shelf life than harvested at right stage of maturity. The pickers/ handlers are trained in methods of identifying produce that is ready for harvest. However, optimum harvesting stages depends upon type of produce and their final use. Horticultural crops may be harvested at two main maturity levels i.e., physiological maturity and commercial or horticultural maturity. Therefore, the proper stage/maturity indices for harvesting of all horticultural crops should be identified for their implementation during harvesting. Horticultural maturity in relation to developmental stages of the plants is depicted in Fig 3.1.

1. INTRODUCTION

Harvesting is the process of gathering the crops from the fields at maturity. The harvesting of a commodity means the end of the growing season for a particular crop. Harvesting is the most labour-intensive activity of the growing season. Harvesting in general includes an immediate post-harvest handling, the actions taken immediately after removing the crop are pre-cooling, sorting, cleaning, packaging and up to the point of on-farm processing or shipping to the wholesaler or consumer.

Harvest timing is a critical decision that balances the likely weather conditions with the degree of crop maturity. Weather conditions such as frost, rain and unseasonably warm or cold periods can affect yield and quality. These conditions can be avoided by harvesting the commodities earlier than the harvest date, but this may result in poor yield and quality. On the other hand, delayed harvesting also results in a better yield, but increases the risk of weather problems. Thus, proper harvesting timings of horticultural commodities often play an important role.

Assessment of harvesting time is a critical time for growers of fruit and vegetables to decide the accurate period of crop harvesting. Fresh produce is normally ready for harvest when it has developed to the ideal condition for consumption and the condition is usually referred to as harvest maturity. Harvest maturity thus refers to the time when the “fruit” is ready to harvest and the time required to reach market. The harvesting should be done earlier than its ideal maturity for proper marketing.

Most growers decide harvesting time for different commodities by looking and sampling. Judgments are based on colour, size and shape (Sight); texture, hardness or softness (Touch); odour/aroma (Smell); sweetness, sourness, bitterness (Taste) etc. Experience is the best guide for this kind of assessment. Harvest maturity can readily be observed in some fruit crops but it can be more difficult in case of some fruits like avocados remain unripe off the tree after maturity.

1. INTRODUCTION

Grading and packing of fruits ensure the safe transportation from the farm to the storage and consumer centre, while reducing the damage during transportation. The properly graded fruits should be packed in such a way that they do not collide with each other during transportation. Throughout the entire handling system, packaging can be both an aid and hindrance to obtaining maximum storage life and quality. Before the fruit is packed in a suitable container/package it is graded according to the standard grades accepted in the market. Packaging is one of the important components after grading during the handling of fruits. Packaging is meant to protect the commodity by immobilizing and cushioning it, but temperature management can be made more difficult if packing material block ventilation holes. Packing material can act as vapour barriers and helps in maintaining higher relative humidity within the package. Packaging material such as trays, cups, wraps, liners and pads may be added to help immobilize the produce. A wide variety of containers such as wooden boxes, plastic crates, corrugated fiberboard boxes are important package used in the transportation and distribution of fruits in most of the developing countries.

I. POST HARVEST DISEASES

A. Post-Harvest Diseases of Fruits

1. FRUIT CROPS

1.1 Physiological Disorders

A wide variety of physiological disorders are found in apple fruit, but the susceptibility varies with variety, pre-harvest factors and post harvest conditions. Disorders can be considered in three categories:

1. Disorders that develop only on the tree: Most important is watercore in which intercellular air spaces in the core and cortical tissues become filled with liquid, Presence of watercore in fruit at harvest creates problems in certain varieties such as ‘Delicious’ because fruit with moderate or severe watercore can develop breakdown during storage.
2. Disorders that develop on the tree and during storage: Bitter pit is a disorder characterized by development of discrete pitting of the cortical flesh. Rapid cooling, CA storage and application of postharvest calcium drenches may be able to reduce its occurrence.
3. Disorders that develop during storage: Senescent breakdown disorders, chilling disorders and disorders associated with inappropriate atmospheres during storage are common disorders. The most common disorders associated with temperature and atmospheres are superficial scald, soft scald, low temperature breakdown, brown core, internal browning, low O2 injury, and high CO2 injury.

1. INTRODUCTION

Quality, i.e. the degree of excellence or superiority, is a combination of attributes, properties, or characteristics that each commodity value in of human food. The relative importance of each quality component depends upon the commodity and its intended use (e.g. fresh or processed) and varies among producers, handlers, and consumers. Appearance of quality, firmness and shelf-life are important from the point of view of wholesale and retail marketers. Consumers judge quality of fresh fruits and vegetables on the basis of appearance and firmness, flavour (eating) quality of the product. Consumers are also concerned about the nutritional quality and safety of fresh fruit and vegetables.

1. TERMS RELATED WITH BROWNING

Food is composed of three main constituents viz; carbohydrates, proteins and fats and their derivatives. In addition to these constituents, inorganic mineral elements and diverse organic compounds like vitamins, pigments, flavouring compounds, enzymes, and acids are also present. Carbohydrates, proteins, fats and vitamins are organic in nature. The percentage of water is large in certain foods. The variation in structure, texture, colour, flavour and nutritive value is because of the varying proportions and arrangements of these constituents.

Carbohydrates are important in foods as a major source of energy, to impart crucial textural properties, and as dietary fiber which influences physiological processes. Digestible carbohydrates, which are converted into monosaccharides, which are absorbed, provide metabolic energy. Carbohydrates account for more than 70% of the caloric value of the human diet. It is recommended that all persons should limit calories from fat to not more than 30% and that most of the carbohydrate calories should come from starch. Non-digestible polysaccharides (all other than starch) comprise the major portion of dietary fiber.

1. INTRODUCTION

Proteins are polymers of amino acids. Twenty different types of amino acids occur naturally in proteins. Proteins differ from each other according to the type, number and sequence of amino acids that make up the polypeptide backbone. Proteins are the important constituents of foods for a number of reasons. They are a major source of energy, as well as containing essential amino-acids, like lysine, tryptophan, methionine, leucine, isoleucine and valine which are essential to human health, but which the body cannot synthesize. Proteins are also the major structural components of many natural foods, often determining their overall texture, e.g., tenderness of meat or fish products. Isolated proteins are often used in foods as ingredients because of their unique functional properties, i.e., their ability to provide desirable appearance, texture or stability.

Proteins are complex organic molecules made up of carbon, hydrogen, oxygen, and nitrogen. Most proteins also contain sulphur and phosphorus and also play an important role in food preparation. The final quality of many food products are influenced by how the proteins are treated while food is being prepared.

Lipids are a class of compounds that are defined by how they are isolated, rather than by their composition. Lipids are molecules that can be extracted from plants and animals by low polarity solvents such as ether, chloroform, or even acetone. They are not appreciably soluble in water. Fats and the fatty acids from which they are made belong to this group as do oils, waxes and steroids. Hydrolyzable lipids are those that contain a functional group that will react with water. The functional group is usually an ester and the list of compounds includes neutral fats, waxes, phospholipids, and glycolipids. Non- hydrolyzable lipids lack such functional groups and include steroids and fat-soluble vitamins (e.g. A, D, E, and K).

Fats and oils are composed of triacylglycerols. These are compounds prepared by the union of glycerol (1,2, 3-tri- hydroxypropane) and 3 fatty acids to form a triester. Fats and oils belong to a group of biological substances called lipids. Lipids are biological chemicals that do not dissolve in water. They serve a variety of functions in organisms, such as regulatory messengers (hormones), structural components of membranes, and as energy storehouses. Fats and oils generally function in the latter capacity. Fats differ from oils only in that they are solid at room temperature, while oils are liquid. Fats and oils share a common molecular structure. The fats and oils contain three ester functional groups. Fats and oils are esters of the tri- alcohol, glycerol (or glycerine). Therefore, fats and oils are commonly called triglycerides, although a more accurate name is triacylglycerols. Triglyceride molecules contain mostly carbon and hydrogen atoms, with only six oxygen atoms per molecule. This means that fats and oils are highly reduced (un-oxidized). Oils are particularly common in seeds, where the stored energy helps seedlings during germination, until they can exploit solar energy through photosynthesis. Fatty acids contain an even number of carbon atoms, from 4 to 36, bonded in an unbranched chain. Most of the bonds between carbon atoms are single bonds. If all of these bonds are single bonds, the fatty acid is said to be saturated, because the number of atoms attached to each carbon atom is the maximum of four. If some of the bonds between carbon atoms are double bonds, then the fatty acid is unsaturated. When there is only one double bond, it is usually between the 9th and 10th carbon atom in the chain, where the carbon atom attached to the oxygen atoms is counted as the first carbon atom. If there is a second double bond, it usually occurs between the 12th and 13th carbon atoms, while a third is usually between the 15th and 16th.

1. INTRODUCTION

India is a vast country having a geographical area of 328 million hectares with 15 distinct agro-climatic zones. Fruits and vegetables are one of the most important and fast growing sub-sectors as they form an indispensable part of healthy diet. It holds a unique position for growing a wide range of vegetables in its diverse agro-climatic conditions. World production of vegetables amounts to 486 million tons, while that of fruits is 392 million tons. India produces 159.5m MT tons of vegetables from an area of 9.07 million hectare annually (NHB, 2013). Productivity of vegetables in India presently is 16.7 tons per hectare. India produces 36 % green peas and 10% onion of world’s production. Onion, potatoes and green vegetables like okra, bitter gourd and green chillies also have good export potential. Being rich in vitamins, minerals, dietary fibre and natural antioxidants most vegetables are classified as the protective foods. However, owing to the presence of high moisture content and mostly being non acidic, the vegetables are highly perishable and needs to be handled properly and immediately after harvest. Processing of vegetables into different value added products is one of the most effective alternatives to reduce post harvest losses.

Vegetables are highly beneficial for the maintenance of health and disease prevention. An intake of about 280 grams of vegetables per day per person has been considered essential. Vegetable unlike cereals deteriorated quickly when stored for long periods because of the relatively high moisture contents. Huge amounts of losses take place between harvesting and consumption. Various causes are attributed to the deterioration process and it becomes essential to adopt integrated, low cost system of post harvest technology right from the pre-harvest stage.

1. INTRODUCTION

Food is constantly being rated for its quality either consciously or subconsciously by all people. Consumers choose food on the basis of its quality and their individual likes or dislikes. The attractiveness of food is clearly a quality which is important both to the manufacturer and to the consumer. When consumers make a selection they basically look for food that is attractive in terms of colour, flavour and texture apart from other psychological and social factors, which they may associate with food. The nutritional quality, shelf-life/keeping quality and cost factor are other criteria which may affect their selection.

The distinctive and attractive colour of food is not only pleasing but is also an indicator of good quality and freshness. The senses of taste and odour help us in detecting and appreciating different flavours and deciding on whether we like the food. The feel and texture of food entering the mouth should be firm, juicy, crisp and are extremely important characteristics that dictate the acceptance of a food. Today’s consumers are discerning, demanding, and more knowledgeable about food. They expect safe products having good value and high sensory quality. Therefore, knowing consumer’s preferences and perceptions of the sensory characteristics of food and beverage products is vital to food manufacturers. Without appropriate evaluation, there is a high risk of market failure.

1. EXPERIMENT 1 : INDUSTRIAL USES OF IMPORTANT CHEMICALS

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome and bulb) of plants used as a flavoring or seasoning, although many can also be used as a herbal medicine. They are those plants, the products of which are made use as food adjuncts to add aroma and flavour or they are derived vegetable substances which are used for seasoning the food imparting distinctive flavour and fragrance that gives zest or piquancy for enjoyment. The term ‘spice’ originated from the Latin word ‘species’, meaning of specific kind. A closely related term, ‘herb’, is used to distinguish plant parts finding the same uses but derived from leafy or soft flowering parts. For example Black pepper, Ginger, Turmeric, Chilli, Cinnamon, Nutmeg etc. Spices are generally composed of fiber, carbohydrate, fat, sugar, protein, gum, ash, volatile (essential oils), and other nonvolatile components. All of these components impart each spice’s particular flavour, colour, nutritional, health, or preservative effects. The flavour components (volatile and nonvolatile) are protected within a matrix of carbohydrate, protein, fiber, and other cell components. When the spice is ground, cut, or crushed, this cell matrix breaks down and releases the volatile components (Raghavan, 2007).

Importance

Ginger is a perennial herbaceous monocotyledon, usually grown as annual, and is known to human as spice as well as medicinal crop. The word Zingiber is thought to come from the Sanskrit word singabera meaning ‘shaped like a horn’. It probably got its name because the rhizomes look like deer’s antlers. It first appeared in the writings of Confucius in the 5^th century B.C.

The economic part is the underground rhizomes, which is pungent and aromatic. It is valued for its medicinal properties and is useful against gastritis, dyspepsia, cold and cough. It is widely used in food, beverages, confectionery, etc. Baby ginger or young ginger results from early harvesting and is a gourmet quality product with a tender, low-fiber texture and is mostly used for pickling. Rhizome contains proteins, fibre, starch, essential oil, Zingiberol, Glutamic acid, Aspartic acid, Glucose, Fructose, and Sucrose. Most ginger varieties have about 3-6% crude fibre, 1.5-3.0% volatile oil and 4-10% oleoresin. The major pungent principle in ginger oleoresin is gingerol. Among the gingerols 6-gingerol, 8gingerol and 10-gingerol are very important in contributing the pungency. Gingerol (Hydroxy methoxy phenyl decanone) on storage gets converted to another compound called shogaol. The age of ginger oleoresin can be assessed based on the shogaol content. Chemically, gingerol is a relative of capsaicin, the compound that gives chilli its spiciness. Cooking ginger transforms gingerol into zingerone, which is less pungent and has a spicy-sweet aroma.

Importance

It helps to cope with fever, cough and cold, stress, high blood pressure, excessive fats in body. It lowers the cholesterol level, cleanse the body by eliminating toxic substances, improve the digestive system, improve blood circulation, cleanses other organs of our body including kidney, pancreas, liver, bladder etc.and aid to deal with menstrual problems. The oil is distilled from leaves and flowering tops of Lemon grass. The oil has strong lemon-like odour, due to high percentage (over 75%) of citral in the oil. The characteristic smell of oil makes its use in scenting of soaps, detergents, insect repellent preparations. However, the major use of oil is as a source of citral, which goes in perfumery, cosmetics, beverages and is a starting material for manufacture of ion ones, which produces vitamin – A. The Citral rich oil has germicidal, medicinal and flavouring properties. An allied species called West Indian lemon grass (C.citratus) has low citral content in the oil and has meager trade in the country.

Importance

It is one of the most valuable primary products in world trade, in many years second in value only to oil as a source of foreign exchange to producing countries. Its cultivation, processing, trading, transportation and marketing provide employment for hundreds of millions of people worldwide. Coffee is crucial to the economies and politics of many developing countries; for many of the world’s Least Developed Countries, exports of coffee account for more than 50 percent of their foreign exchange earnings. Coffee is a traded commodity on major futures and commodity exchanges, most importantly in London and New York.

Importance

Ajwain is an important seed spice and is also useful for its medicinal values. It is a traditional potential herb for curing many ailments in human and animals. It is usually used as a digestive aid, relieves abdominal discomfort due to indigestion and antiseptic. The seeds of ajwain is bitter, pungent and contain 2-4.4% brown coloured oil known as ajwain oil. The main component of this oil is Thymol, which is used as gastrointestinal ailment, lack of appetite and bronchial problems. Thymol is also used in toothpaste and perfumery (Joshi, 2000). Seeds are also used for curing abdominal pains, abdominal tumors and piles (Krishnamoorty and Madalgeri, 1999). In southern parts of India dry ajwain seeds are powdered and soaked in milk, which is then filtered and fed to babies as it relieves colic in babies. It can be used as digestive mixture in large animals.

Any crop improvement programme primarily depends on the amount of genetic variability available and the extent to which the economic traits are heritable. A wide survey of genetic variability and a thorough understanding of the genetic makeup of the crop with the biometrial tools is very much indispensable for initiating an effective breeding programme.

Effectiveness in breeding programme depends upon three main factors viz., (i) the extent of genetic variation available, (ii) heritabiity of the variation and (iii) intensity of the selection pressure that can be applied. As most of the characters of economic importance and related characters which influence the performance of the economic character in a given set of environment are highly influenced by the environmental conditions, the heritable (genotypic) variation usually masked by non-heritable (environmental) variation and thereby creates difficulty in exercising the selection. Hence, it becomes necessary to partition the overall variability into heritable and non-heritable components to enable the breeders to plan for proper breeding programme.

The estimates of mean, variance and standard error are worked out by adopting the standard methods of Panse and Sukhatme (1961). Usually, randomized block design is the choice of the statistical design. Various genetic parameters are worked out from the mean squares. Assessment of genetic variation is usually made through the computation of genotypic variance and genotypic coefficient of variation. The proportion of the total genetic variance expressed as percentage of total phenotypic variance has been used as a measure of genetic variability of heritability in broad sense.

Seed yield is the foremost important attribute and is the end product of many complex component characters which singly or jointly influence the seed yield. Seed yield does not possess gene per se as such. It is the interaction phenotype of the harmonious understanding, mutual adjustment and manifestation of its component characters. As most of the component characters are polygenic, they are greatly influenced by the environment. So, the selection of genotypes based on yield as such is not likely to be effective. The information on the strength and direction of association of the component characters with seed yield and also among themselves will be very useful in formulating an effective breeding programme for seed yield improvement in a given time. Correlation studies provide about the magnitude and direction of genetic association between the seed yield and its component characters.

Correlation coefficients provide the measure of association between two characters. But, they do not provide the causal basis of such association. Further, correlation between seed yield and its component characters are often misleading due to the inter-relationship that exist among the component characters and the operation of size symmetry and component compensation that thwart the breeding progress. The direct contribution of each component to the seed yield and the indirect effects it has through its association with other components cannot be differentiated from mere correlation studies. This is how, it became necessary for a plant breeder to have information on the direct and indirect effects of these components on the seed yield to identify the key characters for improvement.

One of the important studies in the crop improvement programme is the discriminant function analysis. This is a method of exercising selection in plants, which show the extent of which character is genetically related to yield (Goulden, 1959). The technique of discriminant function was developed by Fisher (1936). But, the application of this method for plant selection was first made by Smith (1936) in wheat. He developed an index design for the selection of plant lines in wheat using the concept of discriminant function to derive a linear equation based on observable characteristics as the best available guide to the genetic value of each line.

Stephens (1942) reported about the interaction of yield components within the plant and within the population, which serves as an index for yielding ability. According to Hazel and Lush (1943), selection for a total score or net desirability is more efficient that selection for one trait at a time. The formulae presented by them for selection index give proper weight to each trait that are more efficient than selection for one trait at a time or for several traits with an independent culling level for each trait. According to Darlington and Mather (1949) discriminant function has been defined as a linear compound of series of varieties, obtained by giving the different varieties with individual coefficients which will minimize the difference between classes relative to variation within classes of objects of which the variates are measurements. Mather (1949) reported that these functions afford to the best available means of discriminating the classes and evaluating the genotype of a plant in terms of the observed values of various characters. Pundir and Raj (1971) reported that selection index based on three characters combination i.e., seeds per siliqua, 1000 seed weight and yield per plant was efficient in toria.

A successfully developed new cultivar should have stable performance and broad adaptation over a range of environments, seasons and locations, in addition to high yielding potential. Evaluating performance stability and range of adaptation is become increasingly important in breeding programmes. Since, stability and adaptability are important selection criteria in breeding programmes, in depth research on stability is needed for a better estimate of crop performance and adaptability.

Genotype × season interaction is of major performance to the plant breeder in developing stable but high yielding varieties of crop plants. When new varieties are tested over a series of seasons, the relative ranking of the varieties for any given attribute is rarely the same at each season. This increases the difficulty of identifying superior stable genotypes. Comstock and Moll (1963) have shown statistically the effect of large genotype × environment interaction in reducing the progress from selection.

In order to minimize the genotype × season interaction, stratification of the seasons can be practiced. The implication in stratification is that suitable selections could be made for unfavourable and favourable seasons encountered within the sampling units proposed. Stratification of the environments has been practiced for a long time to identify suitable selection that could be made for the narrower range of environments encountered within the sampling units proposed. However, even with this refinement of technique, the interactions of genotypes with locations in a sub-region with environments encountered at the same location in different years, frequently remain too large (Allard and Bradshaw, 1964). Little is known about the environmental factors contributing to such interactions. Sprague (1966) suggested that even if such information were available, the possibility of materially reducing the genotype × environment interaction in field experiments would remain questionable.

Genetic architecture of a population is the result of prolonged natural selection. The populations which exist in diverse environments might have been strongly diversified genetically. So, it is necessary to understand the extent and rates of genetic divergence existing between the diversified forms or types. Genetic diversity may be available in improved germplasm or it may exist only in genetically inferior stocks.

Genetic divergence among the parents is important in self pollinated crops because a cross involving genetically diverse parents is likely to produce high heterozygous as well as heterotic effect. In such a cross, more variability could be expected in the segregating generations due to the accumulation of the genes of both the parents. Genetic divergence, as one of the criteria of selection of parents is considered in plant breeding as early as 1962 (Murthy et al., 1962; Timothy, 1963). Later, Joshi and Dhawan (1966), Murthy and Arunachalam (1966), Arunachalam et al. (1984) and Lefort-Buson (1987) also stated that for exploiting heterosis as a means of increasing production, it is necessary to have parents of maximum divergence. The more diverse the parents, more is the chance of pronounced heterotic effects and increased spectrum of variability in the segregating generations.

The availability of statistical tools to quantitatively measure the genetic divergence between two or more populations and the relative contribution of individual characters to the total divergence have permitted to trace the evolutionary patterns in some crops such as rice and tobacco and in choosing the parents for hybridization in crop plants (Rao, 1958; Blackith, 1960; Morishima and Oka, 1960; Murthy et al., 1962). Among the several statistical methods developed for measuring the divergence between the populations, multivariate analysis (D² statistic) developed by Mahalanobis in 1936, has been found to be a potent tool. Mahalanbobis’s D² statistic is an effective tool in quantifying the degree of divergence at genetic level and provides a quantitative measure of the association between geographic and genetic diversity based on generalized distance. It is now known that the estimates of genetic divergence are also influenced by environments and seasons. Therefore, if the divergence analysis is conducted in a number of seasons and parents are selected on the basis of consistent divergence over the seasons, the problem of influence of seasons on divergence analysis can be largely overcome.

6.1. Line × tester analysis

A successful approach of crop breeding programme depends on the proper choice of best parents for hybridization and the ideal selection adopted in the early generation. But, the selection of parents for hybridization programme is relatively tough in the case of complex traits like yield and their components as they governed by large number of quantitative genes which are influenced by environments and seasons. Thus, breeders often meet with difficulty to fix in advance the desirable parents which will give superior progenies. In such a situation, knowledge on the nature of gene action on such complex quantitative traits of economic importance is necessary to plan and adopt appropriate selection techniques (Simmonds, 1979) and breeding methodology.

Combining ability analysis gives useful information regarding the selection of parents in terms of the performance of the hybrids. This analysis elucidates the nature and magnitude of various types of gene action involved in the expression of quantitative traits (Dhillon, 1975). Thus, the knowledge of combining ability serves as an useful tool for the selection of plants for hybridization and further exploitation. Combining ability consists of general and specific combining ability.

Sprague and Tatum (1942) defined general combining ability (gca) as the “average performance of a line in hybrid combinations” and specific combining ability (sca) “as those cases in which certain combinations do relatively better of worse than would be expected on the basis of the average performance of the lines involved. The general combining ability provides an indication of the importance of genes of largely additive in nature, while specific combining ability indicates the importance of non-additive gene effects.

Several biometrical techniques are available to estimate the general combining ability of parents and specific combining ability of hybrids. Among them, line × tester analysis is extensively used both in self and cross pollinated crops. The advantage of line × tester analysis is that a large number of inbred lines can be evaluated than diallel analysis. Besides, it provides additional information on the performance of the specific hybrids on gene action in contrast to top cross or polycross. The line × tester analysis is an efficient biometrical approach for assessing the combining ability of parents and hybrids (Kempthorne, 1957).

Eswaran (2007) made genetic analysis of six parents and their 30 hybrids of Okra with the method of analysis proposed by Hayman (1954b). He estimated the various genetic parameters viz., _D?, _F?, H?₁, H?² and Ê as well as the various genetic ratio. The results are presented in Tables 69 and 70.

The estimates of _D? were significant for seven out of ten characters studied. This indicated that the component of variation due to additive genetic variance was important for days to seedling emergence, number of first fruiting node, height of first fruiting node, plant height, days to first picking, number of fruits per plant and fruit weight. These characters could be improved by resorting to simple selection. The estimates of H? ₁and H? ₂were positive and significant for almost all the characters studied. It indicated that there were unequal frequency of alleles i.e., u ¹ v at all the loci, in this context, ‘u’ refers to the frequency of alleles which increase the mean expression of the character and are situated at loci which exhibited dominance. On the other hand, ‘v’ corresponds to the frequency of alleles at loci that decreases the expression of the character. Further proof for the unequal distribution of the alleles over loci was obtained

Eswaran (2007) made graphic analysis with the model proposed by Jinks and Hayman (1953). He evolved 30 hybrids from six parents in a diallel fashion. The results are presented in Tables 71-74

The narrow sense heritability estimates were high for days to first flowering, plant height at first flowering, number of leaves at first flowering, plant height at maturity, productive tillers per plant, boot leaf area, 100 grain weight, grain length and grain L/B ratio. These characters may be controlled by additive genetic variance. This indicated that the individual genotype can be evaluated readily from their phenotypic expression. Simple selection would more effective in the sets of materials exhibiting greater additive genetic variability and desirable mean performance. Thus, it merit selection in the next generation. On the other hand, the remaining traits may largely be controlled by non-additive genetic variance or the number of genes controlling these traits may be more, or these traits may largely be influenced by a large number of modifiers or might be largely influenced by environment. As the effects of the environmental variance were generally low, the observed low heritability for the above traits might be due other factors other than environment. These traits are hard to improve by selection. It necessitates progeny testing.