eChapters

Mungbean (Vigna radiata L Wilczek) is considered to be originated from Vigna sublobata. It is also known as green gram, an important short duration grain legume with wide adaptability, low input requirements, and the ability to improve soil fertility by fixing atmospheric nitrogen. Mungbean is well suited to a large number of cropping system and constitutes an important source of cereal based diets. Mungbean is used for different purpose. The major portion is utilized in making dal, curries, soup, sweets and snacks. The food values of mungbean lie in its high and easily digestible protein. Mungbean is grown throughout Asia, Australia, West Indies, South and North America, Tropical and subtropical Africa. However, India alone accounts for 65% of the world acreage and 54% of the world production. It is widely cultivated in India in different seasons; however, the maximum area is under kharif cultivation. Extremely plastic morphology, phenology and short maturity duration (60 days) makes the crop ideal as a catch crop, inter crop or relay cropping. It is grown as sole relay crop in rice fallows during rabi season in A.P., Tamilnadu, Karnataka and Orissa and sole catch crop during spring/summer season in Uttar Pradesh, Bihar, West Bengal, Jharkhand, Punjab, Haryana & Rajasthan (Table 1).

Chickpea, Cicer arietinum L, is the second most important pulse crop in the world. In India, it occupies prime position in terms of area, production and economic value and as an important constituent vegetarian diet. Chickpea is traditionally grown in many parts of the world covering Asia, Africa, Europe and North and South America. But the bulk of it is produced and consumed in South Asia and increasingly in Middle East as well as in some Mediterranean countries. Recently, chickpea cultivation started in Australia, Canada and USA mainly for export to south Asia. The cultivated species, Cicer arietinum L. (2n=16 and n=8), is characterized by possessing two distinct types-small and brown seeded known as desi type, and bold and white seeded known as kabuli type. The former is mostly cultivated in Indian sub-continent. Chickpea (Cicer arietinum L.) is also known by several common names viz., Bengal gram, Gram, Chhola, Hommes and Garbenzobean.

Chickpea provides 2-3 times more protein than many cereals, constituting a major component of the agrarian diet of the Indian sub-continent. Chickpea grains provide about 18-24% protein, 4-10% fat, 52-70.9% carbohydrate, 10-23% fibre, minerals and vitamins. Among essential amino acids lysine, methionine, threonine, valine, isolucine and leucine are major components of seed protein. It also contains considerable amount of vitamins such as B₁ and B₂, ascorbic acid (vitamin C) and niacin also. Chickpea, therefore, plays an important role in human nutrition.

Lentil is one of the most nutritious cool season food legume and ranks next only to chickpea. It is grown throughout the northern and central India for grains, which are used as dal (wholeor dehulled) andin various otherculinarypreparations. Lentil contains about 25% protein, 0.7% fat, 2.1% mineral, 0.7% fibre and 59% carbohydrate. It is a rich source of phosphorus and carotene. It is generally grown as rainfed crop during rabi season after rice, maize, pearl millet orkharif fallow. It is also grown as intercrop with barley, linseed, mustard and autumn planted sugarcane. In North-eastern parts of the country, lentil is also cultivated as paira crop with rice in which seeds of lentil are broadcast in the standing crop of rice 7-10 days before its harvest. It is grown on a wide range of soils from light loamysand to heavy clay soil in northern parts and moderately deep black soils in central India.

Fieldpea is animportantrabi pulse crop which is highly productive and is grown for food, feed as a vegetable. There are two types of peas grown in India viz., vegetable type in which grains arevery sweet when green and become wrinkled ondrying, and grain type where grains are generally white and round. Green seeds of the grain type are not so sweet as in thecase ofvegetable type. The dry grains areconsumed in various forms such as chat, chhola, dal, vegetable and flour. Green seeds are used as fresh, frozen or canned vegetables. The cultivation of grain type is confined to northern and central parts of the country.

It is high protein (20%) crop with all the essential aminoacids important for normal activity of living organisms. The fractional composition is also favourable the most easily assimilated water soluble protein from mature pea seeds varies from 36 to 87% and in green matter from 65 to 82%. Pea contains 4 mgpro-vitamin A, 300 mgvitamin C, 3 mgB₁, 1.5 mgB₂and 1.2 mgpantothenic acid per 1000 g fresh seed weight. Also, it contains 1.1% fat, 2.2% minerals, 4.5% fibre and 56.5% carbohydrate. It is rich in phosphorus. Green pea and the immature pods of pea are typified by a high level of active lipotropic antisclerotic substances-choline and inositol.Choline deficiency may lead to the development and growth of malignant tumors.

Grasspea (Lathyrus sativus L.), also called chickling pea, is an important crop of economic significance in India, Bangladesh, Pakistan, Nepal and Ethiopia. It is also cultivated in China, many countries of Europe, the Middle East and northern Africa. It is a food, feed and fodder crop belonging to the family Leguminacaae and the tribe vicieae (Smartt, 1990).

Grasspea is very tolerant to drought conditions and has been grown successfully in areas with an average annual precipitation of 380 to 650 mm. Despite its tolerance to drought, grasspea is not affected by excessive rainfall and can be grown on land subject to flooding (Sinha, 1977). It has a very hardy and penetrating root system and, therefore, can be grown on a wide range of soil type, including very poor soil and heavy clays. This hardiness together with its ability to fix atmospheric nitrogen makes the crop ideally to grow under adverse conditions (Campbell et al. 1994). In India, Bangladesh, Nepal and Pakistan, it is often broadcast into a standing rice crop one to two weeks before the rice is ready for harvest where it flourishes on the residual soil moisture after the rice has been harvested.

Despite all the advantages compared to other crops, relatively little efforts have been made to improve this very hardy pulse crop. The main reason has been the knowledge that excessive consumption of grasspea can lead to a neurological disorder, called Lathyrism in man and domestic animals (Jackson and Yunus, 1984). It appears when Lathyrys sativus forms the main component of the diet contributing to at least 30% of the caloric intake for a period of 3 to 4 months (Campbell et al. 1994).

Guar [Cyamopsis tetragonoloba (L.) Taub.], internationally known as guar, is extremely drought hardy, deep rooted, summer annual legume of great economic and adaptive significance. Virtues of guar effectively match with low and erratic rainfall pattern and high ambient temperature habitats of arid regions. The crop may thrive very well in rainfall range of 250-450 mm with 3-4 spells, temperature range of 25-40°C, RH values of 50-65%, longer days with 8-9 hr sunshine, particularly at maturity. Guar is ideally suited to light to medium textured soils, with no water logging conditions. The crop tolerates less inputs and restricted after care, matching with the arid farmers’ livelihood conditions. It is grown for grain, vegetable, fodder, cattle feed and green manure purposes, mainly in rainfed habitats of Rajasthan, Haryana, Gujarat and to some extent in Punjab and Madhya Pradesh. This crop has recently been introduced in non-traditional regions of Annantpur, Kadappa and Chittoor dry region of Andhra Pradesh. Only duringcurrent summer season of 2012, guar has been successfully cultivated with 4-5 irrigations in parts of Chattirgarh and Vidarbha and in non traditional summer seasons of Rajasthan. The cultivation in non-traditional regions and seasons have increased possibility of two crops in rainy and summer seasons. Even though, guar is cultivated on marginal lands, with marginal inputs in these regions, yet it has occupied the status of international, export oriented cash crop. The same has been due to presence of natural polysaccharide galactomannan gum content in seed endosperm. The gum content has wide industrial uses. Almost 80-85% guar gum produced in India is exported and rest is used for inland commercial demands. Of late, increasing demands of guar gum for USA alone to the tune of 5.0 lakh tonnes annually has led to sky rocketing prices resulting in economic benefit of Rs. 1.0 lakh to 1.5 lakh/ha in 90-100 days only. Hence, guar is rated as a source for providing livelihood security to arid farmers in practical reference. Relevant information on guar have been provided in this chapter.

Among the pulses, rajmash is one of the high potential pulse crops with a yielding potential of 18 to 20 q per ha. Rajmash or French bean (Phaseolus vulgaris L.) is a short duration non–traditional grain legume and one of the precious and highly relished pulse crops of North India. Rajmash is known by various names viz., French bean, rajma, haricot bean, field bean, kidney bean, snap bean, pole bean etc. It is an important winter vegetable grown both for tender pods and dry seeds, which form a rich source of crude protein (21.25%), fat (1.7%) and carbohydrates (70%). Besides, it contains 0.16 mg iron, 1.76 mg calcium and 3.43 mg zinc per 100 g of edible part (Jasvinder Kaur and Mehta, 1994). The fresh pods and green leaves are used as vegetable. The antimetabolites of dry beans needs removal by cooking and soaking in water.

The Arid Legume includes clusterbean (Cyamopsis tetragonoloba (L.) Taub.); moth bean (Vigna aconotifolia (Jacq) Marechal; cowpea (Vigna unguiculata (L.) Walp) and horse gram (Macrotylom uniflorum (L.) Verdc). In India, these are grown extensively as rainfed crops in Rajasthan, Orissa, Maharashtra, Karnataka, Gujarat, Haryana, M.P. and to a limited extent in other states covering a total area of 51-80 lakh hectares (Table1). Most of the production comes from harsh environments where both biotic and abiotic constraints prevail limiting the production.

Arid Legumes as a group of pulses are extremely important in the common vegetarian diet of the people in the area of its cultivation. They also offer a new dimension as they have become foreign exchange earners through export opportunities. For example, clusterbean (guar) contains 30-35 per cent guar gum and India is a world leader in the export of this commodity and earns more than Rs.1100 crores annually (Mathur and Henry, 2009). Similarly, moth bean is gaining great industrial importance because of Bikaneri Bhujia industry which is heavily based on this crop (Singh and Henry, 1985). Cowpea is very important in Dahi bada industry and making curry preparation while horsegram is a minor pulse and is utilized by the poorest of the poor in its growing areas as well used for kidney stone treatment (Henry et.al., 2006; Vishwanatha et. al., 2006). Clusterbean and moth bean together account for 3.5 million hectare areas in the great Indian Thar Desert and play a very important role in the economy of the desert farmers. Similarly, cowpea and horse gram are grown mostly in marginal and sub-marginal lands under rainfed situations with no inputs applied by the farmers. These two pulses are grown in various areas in the country and easily adapted to various conditions.

Crop production broadly depends on the fertility of the soil where a crop is raised. There are several factors like the kind and quality of seed, climate, water supply, and plant protection measures etc. that affect the crop production. Among these factors, the fertility status of the soil largely determines the ultimate yield even if all these factors are optimum for crop production. A clear distinction should be made between soil fertility and soil productivity. Soil fertility deals with the inherent capacity of soil to provide nutrients in adequate amounts and in proper balance, for the growth of specified plants when other growth factors such as light, water and temperature, and the physical condition of the soil are favourable. Soil productivity is concerned with the capability of soil to produce a specified plant or plant parts or a sequence of plants under well defined and specified systems of management inputs and environmental conditions, viz. climatic conditions. It does not mean that a fertile soil is always productive. A fertile soil, under a bad management system, may be unproductive for a crop. In this book, plant nutrient elements and their available forms, functions and deficiency symptoms are briefly described for the better understanding of soil testing and fertilizer recommendation.

Soil testing is a useful tool that can help to ensure the efficient use of applied plant nutrients. Soil tests provide a means for assessing the fertility status of a soil, but soil tests do not provide a direct measure of the actual quantity of plant available nutrients in the soil. Instead, soil tests measure the quantity of a nutrient element that is extractable from a soil by a particular chemical extracting solution. The measured quantity of extractable nutrient in a soil is then used to predict the crop yield response to application of the nutrient as fertilizer, manure, or other amendment. As soil test levels increase for a particular nutrient, the expected crop yield response to additions of that nutrient decreases. A soil-testing programme has four phases as follows:

1.Collection of soil samples,

2.Chemical analysis of soil samples,

3.Calibration and interpretation of the results of chemical analysis, and

4.Nutrient/Fertilizer Recommendation.

3.1 Important Soil Physical Properties

3.1.1 Analysis of Soil Texture

Soil texture refers to the relative proportions of sand, silt, and clay on weight basis. Soil texture was recognized from very early times by experienced farmers from the feel of moist soil placed between the thumb and forefinger. The size groups arbitrarily classified by the International Society of Soil Science (ISSS) into clay (< 0.002 mm), silt (0.002 0.02 mm), fine sand (0.02-0.2 mm), and coarse sand (0.2 2.0 mm). Each soil textural name specifies the weight percent of each fraction falls within certain defined limits. The determination of the percentage of the soil separate present in a sample is called particle-size analysis.

Each type of particle present makes its contribution to the nature of the soil as a whole. Sandy soils are usually quite permeable to air, water, and roots, but they have two important limitations. One is their relatively low water-holding capacity; the second is that they are poor storehouses for plant nutrients. These limitations of sandy soils can, of course, be overcome if both fertilizer and irrigation water are available, but the costs are large.

Clay not only have a large surface area per gram, it also has electrically charged particles. These charges give clay the capacity to attract plant nutrient ions to its surface in forms available to plants, but sand lacks this capacity. Clay holds much more water than sands because they have a large surface area to be coated with water. One important problem with clay soils is their stickiness. When wet, they stick to ploughs, boots, or whatever they contact. Loam and silt loam soils are highly desirable for most uses. They have enough clay to store adequate amount of water and plant nutrients for optimum plant growth but not so much clay as to cause poor aeration or to make working with them difficult.

4.1 Sampling and Preparation for Analysis

The determination of nutritional need of crops is an important aspect of nutrient management of any plant analysis programme. The need of fruit plants for mineral nutrients differ from those of annual crop species in a number of ways, many of which are related to the perennial nature of tree crops. In perennial tree crops, there is a need to supply nutrients both for ultimate fruit production, the fruits and the vegetative organs, which persist from year to year. The need for leaf analysis in perennial horticultural crops and forest trees has proved its superiority over soil diagnostic methods. This is essentially because of their deeper root system and the fact that nutrients supplied in one year may have its effect on both the nutrition and crop production in following years. However, it is largely being used not as an alternative method to soil testing, but as a supplement to soil testing. Results of foliar analysis are usually interpreted using the critical nutrient level (CNL) approach. Accurate interpretation of foliar analysis using the CNL approach is possible only when sampling is restricted to the same growth stage at which standard reference values have been established (Beaufils, 1971, 1973). The general purposes of plant analyses are:

5.1 Sampling

There are different sources of water such as rain, streams, canals, lakes, tanks, ponds, large reservoirs, shallow and deep wells, shallow and deep tube wells, as well as sewage effluents and sea water. The composition of the different sources of water vary with the season, rate of flow, the extent of effluents from the industrial units and sewage effluents from the municipal area during rainy season, the river tank and pond water becomes salty and muddy due to soil erosion. The depth of ground water also varies with the seasons. The sources of water available to the farmer for irrigation of crops are generally few such as canal, shallow and deep wells, pumping sets, tube wells and runoff water collected in excavations along roads, natural drains and adjoining areas under impeded drainage. The composition of water also varies with the season. Whatever may be sources of water, the water sample is taken along with the soil sample to soil testing laboratory for its analysis by way of assessing the suitability of water for irrigation.

For drawing maximum benefit the samples taken be representative of the water in bulk and it should be collected in a clean vessel. One to three litres capacity plastic bottles duly washed with a detergent are satisfactory. However, before filling with water samples the bottles must be rinsed with water samples three times. The information such as farmers name, owner of pumping sets, date and month of sampling depth of ground water, crops and soils being irrigated, any specific agricultural or human problems encountered to be briefly recorded along with the name of village, block, tehsil and district. The water sample should be properly labeled and submitted to soil testing laboratory for its analysis.

India is recovering from the euphoria of the Green Revolution and battling the residual effects of the extensively used chemical fertilizers and pesticides in the country’s soils. The decade from 1980 to 1990 alone saw the area under pesticides in India, increased a whopping 20-fold, from six million hectares to 125 million hectares. After a high annual consumption of nearly 75000 MT reached in the early ’90s, interventions in the form of Integrated Pest Management (IPM) practices have only now started to show a declining trend in the use of pesticides in India. Interestingly, India’s consumption of pesticides per hectare is low (0.288 kg/ha) when compared with world averages—0.5 kg/ha against Korea’s 6.60 kg/ha and Japan’s 12.0 kg/ha. According to the pesticides industry statistics, India spends US $3/ha on pesticides compared with US $24/ha spent by Philippines, US $255/ha spent by South Korea and US $633/ha by Japan. Yet, despite a comparatively low use of pesticides in India, the contamination of food products in the country is alarming. About 20 per cent of Indian food products contain pesticide residues above tolerance level compared to only 2 per cent globally. No detectable residues are found in only 49 per cent Indian food products compared to 80 per cent globally. A pesticide is any substance or mixture of substances intended for preventing, destroying, repelling or mitigating any pest. Though often misunderstood to refer only to insecticides, the term pesticide also applies to herbicides, fungicides and various other substances used to control pests.

Pesticides and their metabolites have received particular attention in the last few years in environmental trace organic analysis because they are regularly detected in food products, surface/ground waters and soil strata throughout the world as consequence of their widespread use for agricultural and nonagricultural purposes. So it is the need of the hour to study the levels of pesticides residues in plants, water and soil and their fate in environment after its degradation.

It would be necessary to work out tolerance limits of pesticides residues in/on crops, soil and water and the efforts, therefore, are directed towards various residue analytical methods like TLC, GLC and HPLC etc. which are suitable for the purpose.

Soil testing kit is developed to determine the available nutrient status of soil by rapid test methods. With this system of soil testing, a farmer can test his own soil as often and, in as many places as he feels necessary, and after gauging the need of his soil, he can apply the fertilizers as required. The present mode of soil testing in laboratories usually takes few days and sometime weeks and the farmers may have to travel long distances to submit the soil sample.

To set up a soil-testing laboratory the minimum requirements are as follows:

8.1 Laboratory floor area

Minimum four rooms are needed. They are as follows:

1. Office room, floor size: 18’x 12’

This room is used for registration of the soil samples received, recording recommendations along with soil test results in laboratory book and in report sheet, their dispatch, accounts etc.

The analytical work in a soil-testing laboratory mainly involves standard chemical methods, suitably modified to permit handling of a large number of soil samples with the required degree of accuracy and speed. Many of the analytical operations are carried out more conveniently with help of common as well as sophisticated instruments.

The various instrumental measurements followed in soil and water-testing work in the laboratory can be broadly divided into two groups:

1) Determination of pH and electrical conductivity

2) Colorimetric, spectrophotometric

The role of plant nutrients in crop production is well established. Estimation of nutrients contents and forms in materials, which are involved in nutrient supply and dynamics is a crucial step in scientific nutrient management and crop production. There are 16 essential plant nutrients. These are carbon (C), hydrogen (H), oxygen (O), nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), iron (Fe), sulphur (S), zinc (Zn), manganese (Mn), copper (Cu), boron (B), molybdenum (Mo) and chlorine (Cl). These nutrients have to be available to the crops in quantities as required for a yield target. Any limiting or deficient nutrient (s) will limit crop growth.

Introduction

In chemical laboratories, the use of acids, alkalis and some hazardous and explosive chemicals is unavoidable. In addition, some chemical reactions during the analysis process may release toxic gases and, if not handled well, may cause an explosion. Inflammable gases are also used as a fuel/heating source. Thus, work safety in a chemical laboratory calls for special care both in terms of the design and construction of the laboratory building, and in the handling and use of chemicals.

For chemical operations, it is also necessary to provide special chambers. The air temperature of the laboratory and work rooms should be maintained constant at 20–25°C. Humidity should be kept at about 50 percent. Temperature and humidity often affect soil and fertilizer samples. Temperature also affects some chemical operations. Hence, maintaining the temperature and humidity as specified is critical.

Introduction

Soil is the main source of nutrients for the plants. Soil also provides support for plant growth in various ways. Knowledge about soil health and its maintenance is critical to sustaining crop productivity. The health of soils can be assessed by the quality and stand of the crops grown on them. However, this is a general assessment made by the farmers. A scientific assessment is possible through detailed physical, chemical and biological analysis of the soils. Essential plant nutrients such as N, P, K, Ca, Mg and S are called macronutrients, while Fe, Zn, Cu, Mo, Mn, B and Cl are called micronutrients. It is necessary to assess the capacity of a soil to supply nutrients in order to supply the remaining amounts of needed plant nutrients (total crop requirement - soil supply). Thus, soil testing laboratories are considered nerve centres for nutrient management in crop production systems and plantation forestry.

Soils may have large amounts of nutrient reserves in them. All or a part of these reserves may not be of any use to crops because they may not be in plant-available form. For the purpose of estimation or analysis of plant-available soil nutrients, such methods are to be used that have been tested/verified for the correlation of nutrients extracted and their plant availability. This book describes internationally accepted and widely used methods. Apart from nutrients, soil pH estimation is also critical in the assessment of soil health. Generally, plants prefer soils that are close to either side of neutrality. However, there are acid- loving plants and also plants that can withstand high soil alkalinity. Hence, good yields and economic returns from farming are possible in acid and alkali soils. With proper amendments, still higher yields can be obtained in acid and alkali soils. Soil pH also has a considerable influence on the activity of soil micro-flora and on the availability of soil nutrients to crops. It is also important to estimate physical properties such as soil texture, structure, bulk density, soil colour, water content and soil temperature.

Introduction and Scope

Plant and soil testing enable scientific assessment of the needs of the plant for nutrient elements and of the capacity of the soil to supply them. The nutrient elements enter the plant in ionic form from the soil solution. Ion transport to the root surface may take place through ion diffusion and bulk transport (mass flow). Mass flow is the sweeping along of ions as water moves to the root. It is particularly important for ions that are not absorbed on soil colloids such as nitrates and sulphates. Because of mass flow, a plant deficient in N can extract all the nitrates from the soil. Potassium, phosphate and the micronutrient cations are absorbed on soil colloids with various degrees of affinity and are greatly retarded in movement with the soil water. Diffusion (movement along a concentration gradient) is the main mode of transport from the solid phase to the root surface for these non-mobile ions. There is also a possibility that some of them are absorbed by a direct exchange of an ion, usually hydrogen, between the root surface and ions absorbed on soil colloids. Most ions are sorbed by the root against a concentration gradient and, thus, the process involves the use of metabolic energy. The fact that nutrient uptake is an active process explains some of its peculiarities. Plants not only accumulate nutrients against a concentration gradient, they are also able to select from the nutrients at the root surface according to their requirements (preferential uptake).

Introduction

Irrigation water always contains some soluble salts irrespective of its source. The suitability of waters for a specific purpose depends on the types and amounts of dissolved salts. Some of the dissolved salts or other constituents may be useful for crops. However, the quality or suitability of waters for irrigation purposes is assessed in terms of the presence of undesirable constituents, and only in limited situations is irrigation water assessed as a source of plant nutrients. Some of the dissolved ions, such as NO₃, are useful for crops.

Sometimes, effluents and domestic sewage water is utilized for irrigating field crops. For using these water safely in the farming system, assessment of undesirable pollutants and organic and microbial constituents with regard to their suitability is fore-most important. Determination of organic constituents is generally carried out under two categories viz., (i) organic substances that quantify an aggregate amount of organic C and (ii) individual or specific organic substances, such as benzene, DDT, methane, phenol and endosulphan. Important determinations are the chemical oxygen demand (COD), which gives the total organic substances, and the biochemical oxygen demand (BOD), which gives the amount of total biodegradable organic substances in the water sample.

Introduction

The main objective in analysing fertilizers is to assess their quality. The analysis examines both their physical and chemical composition. The quality of fertilizers is stated by the manufacturers and, in most countries, it is statutorily notified. Hence, analysis is carried out to determine whether the stated quality meets the statutorily notified standards or not. Together with the statutory notified composition of the fertilizers, the testing methods are specified. In situations where the testing methods are not notified, the prevalent standard methods are followed. Generally, the term fertilizer refers to mineral fertilizers, which are manufactured chemical products of standard composition, while the term manures refers to organic manures, compost, agro-industrial wastes, etc. The compositions of organic fertilizers, unlike mineral fertilizers, are quite variable and, thus, difficult to regulate precisely.

Fertilizer quality is notified in terms of physical and chemical characteristics. The physical parameters include moisture content and particle size. The chemical parameters refer to the amount and form of nutrients, and to various impurities that may be toxic to plants above a critical limit, e.g. biuret in urea. The efficiency of a fertilizer depends on its form of nutrient content. A phosphatic fertilizer may have water-soluble, citrate-soluble, water-insoluble or citrate-insoluble forms of phosphate. A nitrogenous fertilizer may contain ammoniacal, nitrate and amide forms of N in various proportions.

Introduction

In view of the accepted importance of analysis, the workload on soil, plant and water testing laboratories has increased considerably in recent years. Therefore, analytical methods have needed to be accelerated through the automation of instruments. Almost all instruments either contain inbuilt computers or can interface directly with micro processors, thereby simplifying instrument operation and providing versatility for the analyst. Most operations can be performed through keyboard commands. This type of instrument automation enables:

ABSTRACT

More than 80 per cent area of the Shivaliks is rainfed. Soil erosion greater than 80 t ha^-1yr^-1 is being recorded from denuded hills. Though, trees are nurtured on the farms but no definite pattern of trees on field bunds is followed, (neither from spacing point of view nor from species point of view). Further, these trees are not silviculturally managed to get best output from tree components as well as for posing less competition to the crops. Shivaliks has a wide range of climate, geology, soil, topography and socio-economic strata coupled with wide variety of vegetation. Such variations provide ample opportunities for developing site specific agroforestry systems.

ABSTRACT

Shivaliks are highly fragile ecosystem of Himalayas threatened by problems like soil erosion, loss of tree cover, decreased productivity of fuel, fodder and food, to name a few. These problems are further being complicated due to ever increasing anthropogenic pressure. Maintenance and enhancement of soil fertility is not only vital for food security and environmental sustainability in the Shivalik hills, but all over the globe. Agroforestry is frequently proposed as a solution to problems of land and water degradation as well as an answer to shortages of food, fodder and fuel in the Shivaliks, and the same holds true for Jammu Shivaliks. Substantial environmental benefits accrue from planting trees. Suitable tree crop combinations as well as their management practices need to be worked out. Growing of trees and grasses in agroforestry systems such as agrihorticulture, silvipastoral, agrisilvipastoral are specially suited for Shivalik hills keeping in view their role in soil and water conservation. Additional agroforestry component i.e, animals can further hasten the ameliorative effect of agroforestry. In all, combination of trees, crops and/or animals on the same unit of land holds great potential for contributing to sustainable land use system which can help in conserving soil and water besides providing innumerable socio-economic benefits.

ABSTRACT

The land available to grow food and trees is decreasing owing to population pressure in all the regions of the world. In the Shivaliks, the land available for crop and tree cultivation is further limited by steep slopes and inaccessibility of different land areas. The livelihood options in the Jammu Shivaliks are limited due to poor development of this area compared to adjoining plains. In such a situation, agroforestry is one of the options to increase the livelihood security of the people of this region as it results in concurrent and sustainable use of the limited land for production of food and tree-based products and improves the livelihoods of the rural people. Agroforestry improvement based on scientific inputs and its popularisation has the potential to improve the livelihoods of people of this region. This paper dwells on the role of agroforestry in livelihood security and constraints in realising the potential of agroforestry in Jammu Shivaliks.

ABSTRACT

Shivaliks, the most impor tant ecosystem of the foothills of the Himalayas, have been identified as one of the eight most degraded rainfed ecosystems of the country. They are characterized by undulating barren hill slopes, undulating agriculture fields and erratic rainfall pattern. Majority of the lands under cultivation and orchards in the hilly terrain of the state are thus subjected to runoff and soil loss of varying degrees. The soils of Shivalik hills in Solan district of Himachal Pradesh were found to be coarse in texture with abundance of gravels (upto 73.20%). According to the erodibility indices i.e erosion ratio (ER) and erosion index (EI), all the soils were found to be erodible; however, grasslands and forestlands recorded lowest values for these indices. Forest soils had higher water stable aggregates (WSA), mean weight diameter (MWD) and lower dispersion ratios than the cultivated and orchard soils. The dispersion ratio was comparatively higher under cultivated lands (17.37-22.54) followed by orchards (14.36-14.99) and lowest under forest soils (12.59-13.70). Areas having barren lands recorded very high soil loss (86.05 t ha^-1 yr^-1) followed by intensively cultivated areas (58.87 t ha^-1 yr^-1) and both of these have fallen in very high category of priority. A medium category of soil loss has been observed under degraded forests, agro-horticultural plantations and scrubs (14.77 – 18.27 t ha^-1 yr^-1). While low to very low soil loss was recorded under moderately dense, mixed and dense forests (3.46 – 9.59 t ha^-1 yr^-1). Weighted soil loss of 10.60, 17.12, 19.20 and 256.73 t ha^-1 yr^-1 was observed under 5-10, 10-15, 15-35 and >35 per cent slope classes. However, dense forests in all the slope classes registered annual soil loss within the tolerance limit (5 t ha^-1 yr^-1). Hence, maximum runoff, soil loss and available NPK losses were recorded from the barren lands and lands under cultivation followed by orchards and minimum under forests. Risk of soil erosion is higher on steeper slopes. Mixed forests in slope class of 15-35% have also reflected very high soil loss. However, dense forests in all the slope classes registered annual soil loss within the tolerance limit (5 t ha^-1 yr^-1). There is an urgent need to adopt suitable soil and water conservation measures to check runoff losses causing loss of soil and nutrients.

ABSTRACT

This article is an attempt to describe potential agroforestry systems for mid hills zone of Himalayas. The existing traditional land use systems with separate allocation to agriculture and forest are inadequate not only to fill gaps between demand and supply for food, fuel, fodder and timber but also to check land degradation and soil erosion. The adoption of common agroforestry systems, namely agrisilviculture, agrihorticulture, agrisilvihorticulture, agrihortisilviculture, silvimedicinal, silvipastoral and hortipastoral along with appropriate management practices shall be suitable and viable option for checking soil erosion, improving productivity and economic status of the farming community. The functional components of agroforestry systems, however, differ greatly in size, texture and nature depending on the necessity of rural population. The fuel, fodder, timber and fruit trees dominate in the hilly regions, whereas commercial species like poplar, eucalyptus, shisham, etc constitute the major functional component in lower Shivaliks. Farming communities successfully grow food crops like wheat, maize, soybean, pea, black gram; vegetable crops like tomato, cabbage, capsicum; tuber crops and medicinal crops with multipurpose woody perennials. The findings indicate that agricultural crops can be integrated with woody perennials without any adverse impact on growth, production or physiological status of food crops, except when growing immediately beneath tree canopies. Our experience is that planting timber, fuel-fodder or fruit tree species in combination with agricultural crops and medicinal and aromatic herb species pave the way for diversified products and better economic returns to the farmers. Multipurpose tree species outside the forest have played very important role in catering to the day to day requirements of the rural population, beside environmental conservation. Different farming systems consisting crops + trees have yielded encouraging results and have not only helped diversification but enhanced productivity of land per unit area. Intercropping medicinal and aromatic herb species, especially with fruit and commercial timber further makes agroforestry more profitable.

ABSTRACT

Bio-engineering is the use of vegetation, either alone or in conjunction with civil engineering structures, to reduce instability and erosion of slopes. Such structures are advocated in hilly area mainly because they provide one of the best ways to armour slopes against erosion. Bio-engineering, in the context of upland slope protection and erosion reduction, combines mechanical, biological, and ecological concepts to arrest and prevent shallow slope failures and erosion. This chapter presents the design consideration and construction practices for stabilization of slopes using bioengineering technologies along with a brief review on the salient features and characteristics of the bioengineering processes.

ABSTRACT

The paper presents the results of agroforestry trials that had been conducted in lower shivaliks for assessing soil and water conservation under different land uses. The experiments reveal that agroforestry is a profitable venture compared to monocroping in lower shivaliks, where agriculture is rainfed.

Introduction

The lower Shivalik is composed of an alternating sequence of well indurated, fine grained, purple and grayish-purple sandstones and purple and maroon clays in the lower part and grayish-purple, medium to fine grained standstones in the upper part. The formation attains a thickness of 1,300 m to 1,900 m in the Western Himalaya. The important places of lower Shivaliks are along Sambha-Udhampur Road, Jammu – Srinagar national highway, Nahan, Kalka, Nalagarh, Bilaspur, Sarkaghat regions of Himachal Pradesh. In Kumaon Himalaya, lower Shivaliks are in Kotdwar, Rathwadhab, Mohand, Haldwani and Tanakpur regions

ABSTRACT

Trees play a crucial role in maintaining and regenerating soil fertility through the action of their roots and litter. Trees can also improve soil structure, water holding capacity, crop rooting volume and biological activity in soil by providing biomass. Quick growing species, especially of nitrogen fixing trees when combined with herbaceous crops enhance fertility status of the soil through litter contribution and nitrogen fixation. Nitrogen fixing trees and shrubs, grown in agroforestry systems, are capable of fixing about 50-100 Kg N ha^-1yr^-1. Use of agroforestry is also a viable option for enhancing soil organic carbon density. Soil organic carbon sequestration potential in soils of tropical forest ecosystems varies from 100 to 500 Kg C ha^-1 yr^-1. Improving soil organic carbon pool through agroforestry improves soil quality, biomass productivity and mitigates global warming by reducing the atmospheric concentration of greenhouse gases. Nutrient cycling is another way in which trees draw a large portion of nutrients from deeper soil layer and return it to the soil through crown crash, stem flow and litter fall. In a nutshell, for improving the soil quality, ecological balance and sustainability of agro eco systems , agroforestry is one of the best viable alternative land use system.

ABSTRACT

Mining is an important activity for economic development. However, it is associated with land degradation, pollution of air and water, droughts, floods, land slides and land slips, silting of reservoirs, chocking of bridges and disruption of communications are some of the very serious environmental hazards. The need of the hour is to scientifically extract the mineral coupled with adopting mechanical and vegetative measures to rehabilitate the mine spoils. In the present paper effect of mining on natural resources has been detailed, also techniques adopted and standardized for rehabilitation Sahastradhara mined area of Dehra Dun valley over two decades have been clubbed.

ABSTRACT

Fodder availability is a serious concern during winter season in hilly areas as land for growing fodder crops is hardly available unlike plains. Bhimal as an agroforestry species is being cultivated in the Himalayas since long, however, genetic improvement of the species was hardly undertaken in the past barring a few reports on tree improvement of the species. Seeds were used to be usually collected from crooked trees which are easy to climb or swept from the forest floor. Since agroforestry systems have great promise to improve the productivity of both agricultural and tree crops, therefore, keeping that in view, seven provenances (I.C. Bhaintan , I.C. Chamba, I.C. Katkor, I.C. Malas, I.C. Nauni, I.C. Naur, I.C. Tachla) were collected from different regions of Uttarakhand and Himachal Pradesh and evaluated for 10 years (1995-2004). Significant differences in the productivity potential of Bhimal provenances were noticed and the high yielding fodder provenances identified (I.C. Bhaintan , I.C. Chamba and I.C. Malas), yielding as high as 35 q ha^-1 thus fodder productivity could be increased to 25% by planting high yielding provenances. Likewise high yielding provenaces (HYPs) for fuelwood and fibre were identified which can increase the productivity potential of the agroforestry system. In 2005, more than 1200 saplings of HYPs were multiplied in a polyhouse and planted at different elevations in the Himalayas under prevailing agroforestry systems. Differential responses of HYPs in respect of growth and productivity at different locations have been monitored. The rooting behaviour of HYPs was also investigated and it was found that all the three provenances viz., I.C. Bhaintan, I.C. Chamba and I.C. Malas have high soil binding characteristics, thus revealing that apart from production, this tree species plays an important role in soil conservation. Further, high regression of soil binding on above ground biomass and specific root length was recorded among these provenaces. Looking at the performance of such provenances on the farmers’ fields, the demand of high yielding provenaces is increasing. Unlike Eucalyptus, Bhimal had the minimal effect on the performance of field crops and the overall system productivity of the Grewia optiva based agroforestry system was profitable along with insurance against aberrant monsoon conditions.

ABSTRACT

Survey and research trial conducted for the selection of promising tree based farming system in Paonta valley region of H.P. have been summarized in the manuscript. Tree based farming innovations with intercropping, their planting technology and geometry around field/ farm, pure plantation , block plantation of trees grown with agricultural/fruit crops for better productivity per unit of land have been suggested for improving socio-economic condition of the regional farmers.

ABSTRACT

A long term study was conducted to evaluate different aonla based silvipastoral systems for compatibility, productivity and conservation effects. Three grass species viz. dholu, hybrid napier and perennial arhar were evaluated for 14 years for degraded lands of Shivaliks. Hybrid napier because of its vigour growth adversely affected the growth of aonla but effect on yield turned non-significant. Arhar could survive only during pre-bearing state. Studies on soil losses and runoff for decades showed that Embilica officinalis + Chrysopogon fulvus was the best silvipastoral system for soil conservation. This system saved rainwater and soil in a range of 4.88 to 30.66 cm and 862-2818 kg ha^-1 respectively over sole plantation. The combination of Embilica officinalis + Chrysopogon fulvus proved to be the most effective silvipastoral system for reclamation of degraded lands and improving economic status of people in Shivalik foot hills.

ABSTRACT

Tree component of agroforestry systems produce large biomass of varying nutrient concentration to serve as alternative to inorganic fertilizers under integrated nutrient management or organic farming. Additionally, agroforestry systems proved effective in conserving soil and rainfall and brought down soil loss up to 0.2 t ha^-1 and runoff up to 1.8 per cent of rainfall. Introduction of grasses in aonla conserved up to 31 cm of rainwater, 28 q ha^-1 of soil, 11 kg ha^-1 of N and 2 kg ha^-1 of K₂O. Conservation coupled with ameliorative capacity of agroforestry systems helped in building organic carbon and nutrients and improving soil physical, chemical and biological properties.

ABSTRACT

The lower Shivaliks of Jammu and Kashmir comprise 12% of the total area of Jammu region. The productivity of the soils is not only low but highly unstable. High intensity monsoonal rains coupled with rolling topography, low organic matter and coarse nature of the soils are primarily responsible for soil erosion in the region. Soil loss due to erosion depletes the soil nutrients and, is primarily responsible for land degradation, low productivity and poor economic status of the farmers in the region. Further, the adoption level of the farmers regarding modern conservation techniques is also low. Though soil erosion can be controlled or minimized through agronomical and/or mechanical techniques but agroforestry intervention is one such option which can be used for managing the land in the problematic conditions. Agroforestry systems have proven potential of conserving soil and water besides enrichment of soil through biomass additions. Agroforestry systems, therefore, help curtail soil erosion both by intercepting the rain and minimising its erosivity as well as by reducing the erodibility of the soil. Tree based cropping systems enhance the organic content in soils and therefore, create more stable aggregates, which provide more resistance to erosive forces. The chapter discusses the importance of agroforestry in the fragile Shivaliks of Jammu and Kashmir and suggest how to conserve and restore degraded lands in the region.

ABSTRACT

The paper discusses the problems of soil and water erosion in the Shivalik foot hills and suggests strategies for improved land use planning and the role bamboo species can play in mitigating the problems. The paper also discusses the various bamboo species of the Shivalik foothills, their regeneration, planting practices, management and utilization pattern in detail.

ABSTRACT

The Shivalik range of Himalayas, represent the most fragile ecosystem in India. In order to see the impact of land treatment, five hilly micro watersheds typical of the region having catchment area from 0.813 to 4.750 ha were selected for study. All the five watersheds were brought under study during 1966. Temporal changes in water yield from hilly catchments of Shivalik were monitored for twenty eight years (1966-1993). The watersheds were treated with annual burning (LT1), contour trenching +afforestation (LT2), cutting of trees, shrubs and over grazing (LT3) and over grazing alone (LT4). One watershed (LT5) was kept as control without any interference. As a result of burning, cutting and grazing there was significant increase in runoff as well as peak flow in the initial years, however, after increase in vegetation through protection from 1977 onwards resulted in decrease in runoff and soil loss.

ABSTRACT

Among the challenges of 21^st century, to make the food supply sustainable, the impact of climate change is largely unconceivable. The climate on earth has increased by 0.74° C over the past 100 years. Best estimate for low scenario of global warming is 1.8°C and for high scenario is 4°C. Last decade recorded the hottest in the century and 2009 has been rated hottest since 1900. Retreating glaciers have been confirmed in various parts of the world. Further, the current greatest challenge is to perceive the biological impact of such climate changes. Efforts have been initiated by Intergovernmental Panel on Climate Change (IPCC) to assess the impact of climate change on biological systems across the globe. Since 1950’s, the change in carbon dioxide content in the atmosphere is being monitored. Almost a decade later, computer models were employed to assess the possible impact of change in temperature and enhanced CO₂. By the 1980’s consensus was almost achieved on possible doubling of atmospheric CO₂ concentration due to emission from fossil fuels and rise in the global temperature. Since then quantitative estimates on the biological impacts of climate change have been taken up by scientific community world wide. Presently, ample of evidence on impact of climate change from marine to terrestrial environment, from species to communities, ecosystems and hierarchies have been gathered for both flora and fauna (Walther et al., 2002I). Parmesan and Yune (2003) reported that meta-analyses of 334 species and global analyses of 1,570 species revealed highly significant and regular patterns of change in relation to observed warming with more than 95 per cent confidence, as fingerprints of climate change.

ABSTRACT

Chamba and Kangra districts of Himachal Pradesh are abode to vast natural diversity. The people of the area had developed varied traditionl approaches to live with the nature so that natural resources can be protected for their sustained use. The present paper enumerates some of the ecofriendly life styles, agroforestry systems and water use practices being adopted by the farmers of the region.

ABSTRACT

The increasing level of green house gases in general CO₂ in particular has raised concerns about the vulnerability of human, animal and plant life. These concerns have prompted the Governments world over to take the appropriate measures to save them from perspective destruction. Forests though serve as source and sink of the CO₂, there is need to synthesize the impact of climate change on forests and the role of forests in global carbon cycle. Climate change needs to become part of decision making in forest management. Also, the agroforestry, a potential carbon sequestration activity is lagging behind, there is a growing interest in it in countries that have not only ratified Kyoto Protocol but also facing many other ecological problems on their private working land. The Clean Development Mechanism (CDM) offers benefits through sink credits and reduces the negative impact of climate change, therefore, necessary institutional arrangements should be put in place to use CDM projects effectively for generating resources through afforestation and reforestation projects for the well being of present as well as future generation. Forest/agroforestry scientists/managers need to realize the current degree of vulnerability and start thinking about their ability to cope with the impacts. Governments have initiated negotiations on policy actions to reduce the green house gases and addressed the vulnerabilities of the ecological, economic and social systems to climate change. It may be one of the least expensive ways for industries to off-set their carbon emission and tree growers to benefit through the carbon trade. Despite the fact that the certain aspects under Kyoto Protocol are still under clarification and negotiation, the forest plantations will play an important role in carbon sequestration and the implementation of Kyoto Protocol. Since the development of plantation is a slow process, the dividends will only be realized after a gap therefore the new plantation should be taken up without delay and the old one be managed as per their silvicultural rotation.

ABSTRACT

North-Western Himalayas have a large area which are degraded and bouldry. Such areas are not fit for crop production. These areas are generally kept unutilized and hence are invaded by uneconomic and invasive species. These lands can be brought under production though establishment of silvipastoral system which has a potential of fodder, fuel and timber production besides conserving natural resources. The paper discusses the techniques of establishment, management and production potential of silvipasture systems in north-western Himalayas.

Agriculture is derived from two Latin words Ager and Cultura. Ager means land or field and Cultura means cultivation. Therefore the meaning of the word agriculture is cultivation of land.

Definitions

Agriculture is defined in the Agriculture Act, 1947, as ‘‘including horticulture, fruit production, seed production, dairy farming and livestock breeding/keeping, the use of land as grazing land, meadow land, osier land, market gardens and nursery grounds, and the use of land for woodlands where that use is ancillary to the use of land for other agricultural purposes”.

Agriculture is defined as ‘purposeful work through which elements in nature are harnessed to produce plants and animals to meet the human needs’. It is a biological production process which depends on the growth and development of selected plants and animals within the local environment.

Agriculture is defined as the art, the science and the business of producing crops and the livestock for economic purposes.

As an art it embraces knowledge of the way to perform the operations of the farm in a skillful manner, but does not necessarily include an understanding of the principles underlying the farm practices. The skill is categorized as;

Physical skill: It involves the ability and capacity to plough the field in an efficient and quick manner, handling of farm implements, animals, sowing of seeds, fertilizer and pesticides application etc., For example: Taking a straight furrow.

Mental skill: It involves the ability of the farmer to take a decision based on his experience, he decides the correct and accurate timing of operation, such as i) time and method of ploughing ii) selection of crop and cropping system to suit soil and climate, iii) adoption of improved farm practices.

History is the continuous record of past events

Heritage is the inherited values carried from one generation to other generation

Agricultural heritage refers to the values and traditional practices adopted in ancient India which are more relevant for present day system.

Agricultural Heritage in India

Agriculture in India is not of recent origin, but has a long history dating back to Neolithic age of 7500-6500 B.C. It changed the life style of early man from ‘nomadic hunter of wild berries and roots’ to ‘cultivator of land’. Agriculture is benefited from the wisdom and teachings of great saints. The wisdom gained and practices adopted have been passed down through generations. The traditional farmers have developed the nature friendly farming systems and practices such as mixed farming, mixed cropping, crop rotation etc. The great epics of ancient India convey the depth of knowledge possessed by the older generations of the farmers of India. The modern society has lost sight of the importance of the traditional knowledge which had been subjected to a process of refinement through generations of experience. The ecological considerations shown by the traditional farmers in their farming activities are now-a-days is reflected in the resurgence of organic agriculture.

The word agronomy has been derived from two Greek words, agros and nomos having the meaning of field and to manage, respectively. Literally, agronomy means the “art of managing field”. Technically, it means the “Science and economics of crop production by management of farm land”.

Definitions

Agronomy is the art and underlying science in production and improvement of field crops with the efficient use of soil fertility, water, labour and other factors related to crop production.

Agronomy is defined as “a branch of agricultural science which deals with principles and practices of field crop production and management of soil for higher productivity.

In general crop is an organism grown or harvested for obtaining yield. Agronomically crop is a plants cultivated for economic purpose.

Classification of Crops

Classification is done to generalize similar crop plants as a class for attaining better understanding of them. Field crops are classified in the following ways.

1. According to range of cultivation
2. According to the place of origin
3. Botanical classification
4. Commercial classification
5. Economic / Agricultural / Agrarian classification
6. Seasonal classification
7. Classification based on ontogeny