eChapters

Potassium is an important plant nutrient that influences water relations, carbohydrate and nitrogen metabolism, crop quality and resistance to environmental stresses. This chapter examines potassium behaviour and management in irrigated soils. It begins with the functions of potassium and explains the different forms in which potassium occurs in soil, including relatively unavailable, slowly available and readily available forms. Potassium fixation and release are discussed in relation to soil colloids, temperature, drying, soil pH and aeration. These processes determine the amount of potassium available for plant uptake and are particularly important in intensively cultivated irrigated soils. The chapter also considers luxury consumption and interactions between potassium and other elements. Potassium management is discussed through appropriate rates and methods of application and selection of suitable potassic fertilizers. The effects of potassium nutrition on plant behaviour, water utilization, carbohydrate and nitrogen metabolism, crop quality, disease resistance and low-temperature injury are highlighted. The chapter therefore provides a framework for maintaining potassium availability and preventing nutrient depletion in productive irrigated

This chapter examines the principles, preparation and application of vaccines and biological products. It compares live attenuated, inactivated, toxoid, subunit, recombinant, vector, DNA and mRNA vaccines. Vaccine development phases, immunogenicity, safety, efficacy and post-marketing surveillance are introduced. The chapter discusses adjuvants, including alum, Freund’s adjuvants, liposomes, ISCOMs and delivery systems. Important veterinary vaccines for brucellosis, foot-and-mouth disease, anthrax, Newcastle disease, infectious bronchitis, goat pox, sheep pox and peste des petits ruminants are covered. Questions also address bacterins, toxoids, attenuation, booster requirements and reversion to virulence, providing practical knowledge of immunoprophylaxis in animal-health management.

Parasitoids are important natural enemies that regulate insect-pest populations and reduce dependence on chemical pesticides. They lay eggs in or on host insects, and their developing offspring eventually kill the hosts. Rising temperatures, altered rainfall, elevated carbon dioxide and extreme weather can affect parasitoid survival, development, reproduction, host-searching ability, distribution and seasonal activity. Climate change may also disturb synchronization between parasitoids and their hosts, thereby reducing the effectiveness of natural biological control. This chapter examines how changing climatic conditions influence parasitoid diversity, abundance and pest-suppression services. It also highlights management approaches for conserving and strengthening parasitoid populations in agricultural ecosystems.

The integration of Large Language Models into software development has created powerful capabilities for automated code generation, debugging, testing and application development. However, AI-generated code can introduce security vulnerabilities when models produce incorrect, unsafe or poorly validated programming solutions. This chapter examines the need for security-aware frameworks that combine LLM-based code generation with verification, rule-based evaluation and risk management. It considers the limitations of conventional rule-based systems, including rule explosion, inflexibility, maintenance overhead and limited personalization, and explores how AI-driven approaches can improve adaptability while maintaining safeguards. Particular attention is given to secure integration in sensitive domains such as healthcare, where generated code and automated analytical systems may influence clinical information and decision-making. The chapter considers data-driven evaluation, machine learning, genomic information and risk detection as components of secure AI systems. It emphasizes the importance of validating generated code rather than treating model output as automatically reliable. Secure deployment requires testing, human oversight, access controls, verification mechanisms and continuous monitoring. The chapter therefore presents safe LLM integration as a multidisciplinary challenge combining AI capability, software engineering, cybersecurity and responsible governance.

Guidance and counselling help individuals understand themselves, address difficulties and make informed educational, vocational and personal decisions. This chapter introduces the meaning, principles, objectives, types and processes of guidance and counselling. It examines the qualities and responsibilities of counsellors, counselling relationships, communication skills and techniques used to assist children, adolescents, adults and families. The questions consider individual and group counselling, educational and career guidance, behavioural concerns, adjustment problems, mental well-being, confidentiality and ethical practice. They also assess learners’ understanding of assessment, referral and intervention. The chapter provides a concise revision resource for applying counselling principles within educational, family and community settings.

This chapter connects human-centred ergonomic design with environmental sustainability. Traditional ergonomics seeks to improve safety, comfort and performance, while sustainable ergonomics also considers resource depletion, pollution, waste and climate change. The chapter explains how products, workplaces and systems can support human well-being while minimizing environmental harm. Its principal concerns include efficient use of materials and energy, durable and recyclable products, responsible manufacturing and reduced environmental footprints throughout the product lifecycle. The approach seeks a balance among people, planet and economic performance. By incorporating environmental consequences into ergonomic decisions, designers and policymakers can create workplaces that are simultaneously comfortable, productive, resource-conscious and beneficial to future generations.

Cut flowers have become an important segment of modern commercial floriculture because of their high economic value, domestic demand, export potential and employment-generating capacity. This chapter introduces the importance and scope of cut flower production in India and internationally. It examines the economic, social, employment and export significance of flowers and discusses major commercially cultivated crops such as rose, chrysanthemum, gerbera, gladiolus, carnation, lily, orchid, anthurium and tuberose. The chapter also identifies production constraints including labour, infrastructure, cold-chain limitations and market fluctuations, while highlighting opportunities arising from protected cultivation, precision farming, technology, exports and increasing consumer demand.

Balsam (Impatiens balsamina) is an annual herbaceous flowering plant valued for its attractive flowers and use as a loose flower crop. It performs well under warm, humid conditions and is suitable for rainy-season cultivation. The chapter presents its origin, distribution, genetics, botanical characteristics, varieties and climatic and soil requirements. Detailed production practices include seed propagation, stem cuttings, micropropagation, land preparation, nutrient management, planting, irrigation, weed control, mulching, staking and pinching. Plant growth regulators, insect pests and diseases are also discussed. Particular attention is given to harvesting, postharvest handling and yield, making the chapter useful for commercial cultivation and practical floriculture education.

Celosia is an attractive flowering crop valued for its distinctive inflorescences, bright colours and use as loose and ornamental flowers. The crop includes forms such as Cristata, Plumosa and Spicata, with the characteristic brain-like appearance of cockscomb resulting from fasciation. This chapter deals with the origin, distribution, genetics, botanical features and important varieties of Celosia. It explains climatic and soil requirements, propagation, land preparation, nutrient management, planting, irrigation and cultural practices for commercial production. The chapter also covers plant growth regulation, insect pests and diseases, harvesting, postharvest management and yield. Its practical approach makes it relevant to students, growers and floriculture entrepreneurs.

Chrysanthemum is one of the important commercial loose flower crops in India, valued for its wide range of flower forms, colours, sizes and long-lasting florets. It is extensively used for religious offerings, garlands, Veni, bouquets and ornamental purposes. The chapter describes its origin, distribution, genetics, botanical characteristics and important annual and perennial types. It provides information on suitable varieties, climate, soil, propagation and field establishment. Production practices including nutrient management, irrigation, pinching and other cultural operations are explained systematically. The chapter also discusses important pests and diseases, harvesting, postharvest management and yield, providing a practical foundation for commercial chrysanthemum cultivation and floriculture teaching.

Crossandra is an important tropical flowering crop valued for its attractive flowers and continuous production of loose blooms. It has particular importance in southern India, where flowers are widely used for garlands, hair decoration and religious purposes. This chapter covers the crop’s botanical characteristics, origin, distribution, genetics and commercially important varieties. It explains propagation, nursery management, climate and soil requirements, land preparation, planting, irrigation and nutrient management. Important cultural practices and plant growth management are discussed for obtaining regular flowering and good-quality blooms. The chapter also addresses insect pests, diseases, harvesting and postharvest management, including the correct method of flower collection. It provides a comprehensive production package for growers and students.

Gaillardia is a hardy flowering crop appreciated for its colourful blooms and suitability for loose flower production, landscaping and ornamental purposes. The chapter introduces important Gaillardia species and hybrids and discusses their origin, genetics, botanical characteristics and commercially useful varieties. Production aspects include suitable temperature, sunlight, soil, propagation, seed sowing, nursery raising, transplanting, nutrient management and irrigation. Cultural practices such as weeding and regular removal of spent flowers are included to maintain continuous flowering. The chapter further describes important pests and diseases, including aphids, thrips, powdery mildew, smut and aster yellows. Harvesting during the early morning, cold-chain requirements and yield are also explained

Gardenia (Gardenia jasminoides), commonly known as Gandharaj or Cape jasmine, is an evergreen ornamental shrub distinguished by its attractive, creamy-white and highly fragrant flowers. The flowers are important for garlands, floral arrangements, religious offerings and decorative uses. This chapter discusses its origin, distribution, genetics and botanical characteristics, including important cultivated forms. It explains climate and soil requirements, propagation, land preparation, nutrient management, planting and irrigation practices. Cultural operations necessary for maintaining healthy growth and flowering are also presented. The chapter covers major insect pests and diseases, harvesting, postharvest handling and yield. Its emphasis on fragrance, ornamental value and commercial flower production makes it valuable for floriculture students and growers

Gomphrena (Gomphrena globosa), commonly called globe amaranth, globe flower or bachelor’s button, is an important loose and dry flower crop. Its spherical, long-lasting flower heads make it particularly valuable in the dry flower industry. The chapter describes its origin, distribution, genetics, botanical characteristics and important cultivars. Gomphrena is also notable for betalain pigments and its C4 photosynthetic pathway, which contributes to heat tolerance and moderate drought resistance. Production practices covered include climate and soil requirements, propagation, nursery management, land preparation, nutrient management, irrigation and intercultural operations. The chapter also addresses pest and disease management, harvesting for fresh and dried flowers, postharvest handling and yield.

Ixora is an evergreen flowering shrub valued for its attractive clusters of brightly coloured flowers and its suitability for loose flower production, religious offerings, garlands and landscaping. The crop performs well under tropical and subtropical conditions and is appreciated for its extended flowering period. This chapter presents the botanical characteristics, origin, distribution, genetics and important varieties of Ixora. It discusses suitable climate and soil conditions, propagation, land preparation, planting, nutrient management, irrigation and cultural practices. Special attention is given to pruning and canopy management for improving flowering. The chapter also covers important insect pests and diseases, harvesting, postharvest handling and yield, providing practical guidance for commercial Ixora production.

Magnolia champaca, formerly known as Michelia champaca, is a highly fragrant flowering tree valued for loose flowers, religious offerings, garlands, landscaping and perfumery. Its strongly scented cream to yellow-orange flowers are an important source of fragrance and essential oil. This chapter discusses the origin, distribution, genetics and botanical characteristics of the crop, including important varieties. It explains climatic and soil requirements, propagation, land preparation, planting, nutrient management and irrigation. Cultural practices for maintaining growth and flowering are also described. The chapter further covers major insect pests and diseases, harvesting, postharvest handling and yield, highlighting the importance of Champak as both a traditional flower crop and a valuable raw material for perfumery.

Nerium (Nerium oleander), commonly known as oleander or Kaner, is an evergreen flowering shrub cultivated for loose flowers, landscaping and religious uses. Its flowers are widely used for garlands and temple offerings, while the plant is valued in landscaping because of its drought tolerance and adaptability to poor soils. The chapter presents its origin, distribution, genetics, botanical description and important varieties. It explains climate and soil requirements, propagation, planting, nutrient management, irrigation, pruning and other cultural operations. Pest and disease management is also covered. Special attention is given to harvesting fully open flowers, postharvest handling and shelf-life improvement. The chapter also discusses yield and the plant’s toxic nature.

Nyctanthes, commonly known as Harsingar or Parijata, is an important flowering shrub valued for its fragrant white flowers with orange centres. The flowers have long-standing cultural and religious significance and are traditionally collected for worship and other uses. This chapter presents the botanical identity, origin, distribution, genetics and characteristics of Harsingar. It discusses suitable climate and soil conditions, propagation, planting, nutrient management, irrigation and cultural practices. The chapter also covers pests and diseases affecting the crop and provides information on flower harvesting, particularly the importance of morning collection. Postharvest management, yield and traditional and modern uses of Harsingar flowers are included to support commercial and practical understanding

Introduction

Indian major carps viz. Catla catla, Labeo rohita and Cirrhinus mrigala are the fast growing, consumer preferred and the stay component species in Indian pond aquaculture system. These carps breed spontaneously in natural water viz. river and bundh type tanks where fluviatile condition prevails (Hora, 1945; David 1959; Quasim and Qayyam, 1962; Natarajan, 1971). Above three species under culture condition attain sexual maturity but do not spawn in confined water (Chaudhuri, 1960; Chaudhuri and Singh, 1984). Khan and Jhingran (1975) in their review described several factors viz. temperature, run off water, photoperiod, turbidity and water depth that are playing important roles in initiating natural spawning in ‘bundhs’ and rivers. They further described that no single factor can be considered responsible for spawning separately. The act spawning involves a chain of interrelated conditions as prerequisite to spawn. Monsoon, flood forms the spawning ground and initiates natural spawning. Although fish bred in its natural environment, it was difficult to understand why some species do not breed in confined water where as other species in the same environment breed somoto.

The initial attempt to induce breed IMC (mrigal) was made during 1937. Khan (1938) was able to induce ovulation in Cirrhinus mrigala by administration of mammalian pituitary extract but eggs were not fertilized. No remarkable success on induced breeding of Indian major carps was made till 1957. Indian major carps were induced to breed for the first time on 10th July, 1957 by the injection of aqueous carp pituitary extract at Govt. Fish Farm, Angul of Orissa state by the scientific team from pond culture substation, Cuttack (Chaudhuri and Alikunhi 1957). Eversince 1957, the induced breeding of carps have been tried by many permutation and combination, addition and alteration of inducing agents.

Introduction

Global diversity in domestic animals and aquatic organisms is considered to be under threat worldwide. Worldwide 11 % birds, 25 % mammals and 34 % of fish species are threatened (Lovell-Badge, 2001; Vemuganti and Balasubramanian, 2002) and aquatic ecosystem is becoming more vulnerable to disasters due to run off from agriculture and industrial sources, oil spills or sudden environmental changes leading to total elimination of stocks from different ecosystems. The multifarious human activities in open waters have threatened the fish diversity all round the world. Fish worldwide are in crisis. The effective population sizes in fish hatcheries are getting smaller and smaller that causes loss to farmers worldwide. The World Resources Institute has reported that nearly 70 percent of the world’s marine fish stocks are over fished or are being fished at their biological limit. Apart from fish, across all live stock species there is a shrinking pool of genetic diversity. For instance, the effective population size for all dairy cattle breeds is less than 60 animals. To preserve the gene pool of unique populations by protecting them from extinction, loss of genetic variability (inbreeding) and dilution due to inter breeding with unrelated populations (hybridization) gene banks or germplasm repository can play a vital role. Germplasm repositories in fisheries could be used for: 1) restoration of threatened species, 2) brood stock improvement through genetic modification of a targeted population, and 4) information and technology development including gene pool database management.

Introduction

Improvements in Information and Communication technology are revolutionizing the way people access information. These new technologies are helping to improve communication, disseminate information and facilitate sharing of knowledge and skills. Zijp (1994) notes, Information Technology is making both public and private sector agricultural information systems more accessible and more rapid in transmission. The increase in electronic information and communication technologies and in particular networked information is the most notable change to affect the working practices of information professionals in recent years. Digital technologies have led to the emergence of wide-area connectivity through the Internet, making information on agriculture available worldwide and on-demand. Information technology and electronic networking particularly can strengthen organizations by improving their knowledge base and ability to share information and experiences with partners in the field. Electronic networking not only helps in the exchange of the growing volume of information but also brings people together in partnerships and facilitates a joint programme of action on common themes.

The need for better analytical tools to analyze the data in aquaculture leads to major developments in statistics. These tools play a significant role in the analysis and interpretation of data. Improvement in carp culture through genetic techniques is the only alternative for increasing the carp production and its quality when area of pond is fixed. For better hybrids or efficient strains for higher production it is essential to collect the data on the genetic diversity among the different carp species on the basis of traits. Therefore, sound statistical procedures are needed in the design of experiments as well as in the analysis of the data. This involves, the use of variability studies and the use of multivariate statistical techniques like correlations, path coefficients, D² analysis and other classificatory analysis.

Need for Impact Assessment

Fisheries Research is an economic activity. Like any other investment propositions, resource allocation to Fisheries Research needs to be justified. The society or the donors are always interested to know what happened to the money invested in Fisheries Research. It is important to document the returns and/or benefits accrued from the research investment. Objective assessment of research investment helps in making decision and allocating resources in high returns research portfolio. It also helps to know which research areas and programs benefit the poor and regions. In the paradigm shift, the donors are seeking evidences on impact of past funding as a basis for future financial support. Systematic impact assessment forms the basis for efficient resource allocation in alternative research programs competing for financial support. Research programs demonstrate better historical performance, in terms of benefits generated for the society, and are rated higher for attracting required research resources. Impact assessment studies are also getting more prominence as the international environment is rapidly changing due to many emerging complex problems. Socioeconomic and environmental problems, like poverty, international trade, degradation of natural resources, are growing fast and the donors are looking for the research programs, which can overcome these challenges. Therefore, systematic impact assessment studies would form a strong base for higher research funding to overcome many regional, national and global problems.

Label: Technical information about a registered pesticide in the form of printed material attached to, or printed on, the pesticide container. It is illegal to use the pesticide in ways inconsistent with the label.

Labella (sing. labellum): In certain flies, paired lobes at the apex of the proboscis, derived from labial palps; apical spongelike structure on the proboscis of nonbiting muscoid flies (Fig. 156).

Oak: A hard, durable, and very strong wood used for many purposes like furniture, flooring, decoration etc.

Octane number: It is the percetage of iso-octane (C₈H₁₈) in the mixture of iso-octane and normal heptane (C₇H₁₆), when it produces the same knocking effect as the fuel under test. It is used to indicate the octane rating of a gasoline, describes the anti-knock properties of a fuel when used in an internal combustion engine. Knock is a secondary detonation that occurs after fuel ignition due to heat buildup in some other part of the combustion chamber. When the local temperature exceeds the auto ignition temperature, knock occurs.

Octane rating: A measure of the antiknock properties or engine knock resistance of a gasoline. The higher the octane rating, the more resistant the gasoline is to abnormal combustion.

Octane requirement: The fuel octane number needed for efficient operation (without knocking or spark retardation) of an internal combustion engine.

Odorization: A process of adding a distinctive odor to natural gas so that its presence can be easily detected.

Abstract

India’s climate policy and its stand in the United Nations Framework Convention on Climate Change (UNFCCC) have developed through a complex and contradictory interactions between global pressures to take actions in the field of climate change, India’s foreign policy orientation, its environmental practices and various other national factors. India has been under growing pressure from the major developed economies and also from many small developing countries to play a leading role in mitigating climate change in keeping with its economic and political importance. National factors, including the very important consideration of maintaining rapid GDP growth, favours a conservative approach, with emphasis on expanding India’s share of global climate space. India ranks high on global climate change vulnerability because of its 7,500 Kilometre-long coastline, high dependence of its agriculture on monsoon, decreasing availability of freshwater and over-exploitation of ground water resources, presence of large population in cyclone-prone areas, low lying river deltas and fragile ecosystems like partially submerged lands, and not least, because of melting of the Himalayan glaciers, which feed close to 70 percent of India’s river waters. In 2008, India formulated a National Action Plan on Climate Change (NAPCC) under international obligations. India’s climate policy has always been the preserve of a small group of individuals protected from societal influence and unaccountable to the public at large. Indian policy makers claim to speak on behalf of those very people who have been consciously excluded from democratic and participatory decision-making. The industrialised economies reluctant to own up to their climate obligation only breeds more cynicism within the Indian society. Whatever the outcome of international conventions on climate change or any kind of global negotiations in the immediate future, India cannot afford to give up on the serious issue of climate change.

Keywords: Climate change, Economics, Policy, Agriculture

Pig production is concentrated mainly in the North-eastern corner of the country and consists primarily of backyard and informal sector producers. Though pig population is only 2% of all the livestock animals, Pork production in India  represents 7% of the country’s total meat production. This value is highest compared to any other species of meat animals.

16.1 Introduction

The stabilization of ultra fine as nano-particles in suspension is very important for both controlling the particle size and for developing process based application of these suspensions to achieve a desired result. Generally, two approaches, namely, Top Down and Bottom-Up approaches are followed for the preparation of ultra fine or nano particles. In the Top-Down method, production starts from the micro-scale and the particles size is reduced to nano-size through repeated impact and collision in high-energy ball mills. However, controlling of size, morphology, surface properties and electrostatic charge is often difficult. In the Bottom-up approach, production of nano-particles starts with the individual atoms and building up to a nano-structure by chemical processes.

Obesity : A condition characterized by the excessive accumulation and storage of fat in the body. It is a physiological disorder having high body mass index (BMI), which can be expressed as a mathematical formula in which a person’s body weight in kilogram is divided by the square of his or her height in meters.

Galactometer: It is an instrument used for recording the specific gravity of the milk.

Galactose: It is an aldohexose sugar obtained by hydrolysis of lactose.

Galactosidase: An enzyme (actase) that hydrolyzes a galactoside.

Galactoside: A glycoside that yields galactose on hydrolysis.

Galactosyl: A glycosyl radical C₆H₁₁O₅ that is derived from galactose.

Ideotype: A conceptual model of a plant type that will be best suited to a particular set of circumstances. Ideotypes can be defined in terms of both form and function. There can be ‘isolation’, ‘competition’ and ‘crop’ ideotypes.
Illuvial horizon: i) A soil layer in which material from above has been deposited; the layer of accumulation. ii) A soil horizon that receives material in solution or suspension from some other part of the soil. See also Eluviations.
Image: Picture or graphical representation. In remote sensing and GIS as a term that describes digital representations of earth features (TWS).

4.1 Harvesting

Pomegranate being non-climacteric fruits should be picked when fully ripe. Its fruits become ready for picking 120-130 days after fruit set. Mature fruits should be immediately removed from the plants as delay in harvesting leads to fruit cracking. Fruits harvested at a premature stage have poor keeping quality and are prone to damage during handling and transport. The fruits are harvested when outer rind becomes yellowish and the fruit when tapped produces a metallic sound. The round fruits become flattened from all the sides and basal beak shaped portion shrinks at the time of maturity. Fruits are harvested with the help of secateurs by retaining 1 cm stalk with the fruit. All the fruits should be harvested in 2-3 pickings within a span of one month.

Abstract

Conversion of an already arid land into a desert through indiscriminate human actions magnified by droughts. Such actions include overgrazing, repeated burning, intensive farming, and stripping of vegetation for firewood. One quarter of the earth’s surface is threatened by desertification - an area of over 3.6 billion hectares. Since 1990, Six million hectares of productive land are lost every year due to land degradation. Desertification threatens the liveihoods of more than one billion people and has already made over 135 million people homeless. Desertification does not occur in linear, easily mappable patterns. Deserts advance erratically, forming patches on their borders. Areas far from natural deserts can degrade quickly to barren soil, rock, or sand through poor land management.

The levels of calcium (Ca), inorganic phosphorus (P) and magnesium (Mg) may help in early diagnosis of metabolic and deficiency disorders and for monitoring the herd health status of dairy cattle to maintain production and reproduction.

Estimation of Serum calcium

Calcium is present in 2 forms – inorganic and organic forms. Most of the functions of the calcium depend upon the ionized form. For estimation of serum calcium the most commonly used method is Clark and Collip method.

Blood Cholesterol

(Colorimetric Method of Lieberman, 1885: Burchard 1889 Modified by Watson, 1960).

Introduction

According to Liebermann-Burchard reaction, treatment of chloesterol with acetic anhydride and concentrated sulphuric acid in a water-free environment, polymerized unsaturated hydrocarbon with an intense blue-green colour are produced. The values for cholesterol esters may be calculated by deducting free cholesterol from total cholesterol.

Principles of Working
(Lundegårdh, 1929-1934 : Mac Intyre, 1961)

Flame photometry is the measurement of the concentration of an ionic material in a solution introduced in  to a flame, where the intensity of light emitted by the flame under these conditions is measured. We should give credit to Kirchhoff and Bunsen (1860), who developed the idea of emission spectroscopy into quantitative inorganic analysis, later on Janssen (1970) made lot of developments in this direction. The main parts of flame photometer are: (1) burner, (2) atomizer which disperses the solution as a fine spray into the flame; a means of isolating from the spectrum (i.e., filtering system, diffraction gratting etc.) only that portion of the emitted light which is a specific characteristics of the substance being examined ; a photosensitive detector with or without amplifier; and a method of measuring the desired emission. In flame photometry the diluted biological fluid is atomized directly ino the flame without need of preliminary separation. The resulting emissions are those of all the inorganic ions present. For measurement the emitted light is passed through a monochromater where the wavelength most characteristics of the material analysis and which most closely follows Beer’s law is selected.

Blood Sampling

Blood samples shall be taken in the early morning hours before offering any diet to human subjects or ration to livestock. The syringe and needle should be autoclaved, needle should be free from any blockage etc. In the case of ruminants, blood sample is taken directly from jugular vein, while in swine, blood sample is drawn from ear vein, while in human subjects, blood is taken from prominent vein on the inner surface of the yellow usually the (medium basilic). The container (test tube etc.) should be dried and autoclaved. We should separate plasma (from anticoagulent mixed blood) and serum from ordinary blood by centrifugation immediately. We should remember by heart  that blood samples should not be kept in deep freezer, because there are chances of haemolysis as well as an abnormal distribution of certain ions and enzymes between the cells and the serum. We should never force the blood through the needle as such type of practice may result in extensive hemolysis. We should discard first few drops of blood, while taking sample. We should prepare protein free filtrate immediately. Protein-free filtrate may be kept in a much better way than whole blood or plasma.

I. Titrimetric Method of Estimating Salt in Fish Meal
(Modified AOAC, 1965 method)
Principle

The salt content is calculated as sodium chloride from the content of water solubles chlorides. The chlorides are dissolved in water and directly precipitated by titration with a silver nitrate solution using potassium chromate as an indicator.

Importance of Food Storage

Food storage is both a traditional domestic skill and is important industrially. Food is stored by almost every human society and by many animals. Storing of food has several main purposes:

•Storage of harvested and processed plant and animal food products for distribution to consumers

•Enabling a better balanced diet throughout the year

•Reducing kitchen waste by preserving unused or uneaten food for later use

•Preserving pantry food, such as spices or dry ingredients like rice and flour, for eventual use in cooking

•Preparedness for catastrophes, emergencies and periods of food scarcity or famine

•Religious reasons (Example: LDS Church leaders instruct church members to store food)

•Protection from animals or theft

Peach (Prunus persica (L.) Batsch.) is a highly popular fruit crop grown in temperate regions of the world. In India, peach cultivation is confined to mid hill zone of Himalayas extending from J&K State to Khasi Hill at an altitude of 1500 to 2000 meters above mean sea level. Low chilling cultivars are also grown in sub mountainous zones of Punjab, Haryana, Delhi and Western U.P. and also gaining popularity in sub-tropical areas of Jammu. Peach crop in J&K state covers an area of 2,615 hectares with 1,699 hectares falling in Jammu Division. Total production of peach in J&K state is 6,221 metric tonnes, out of which 2,612 metric tonnes are being contributed by Jammu Division. Main peach growing areas in Jammu region are hilly areas of Poonch, Doda, Kishtwar, Ramban Udhampur, Reasi, Rajouri and Kathua districts. Recently, the new orchards of low chill peaches are also being planted in Jammu, Samba and Kathua districts.

Climate and Soil

Peach does well in wet and cool climate with cold winter and dry summer. It likes mild climate. The limiting factors in peach cultivation are the minimum winter temperature, chilling hours, spring frost, hail storms, high humidity and desiccating winds during summer. In sub-tropical areas of North, the low chilling cultivars require 50-300 hours of chilling during the winter for proper flowering and fruiting.

The peach thrives well on light textured soil. Deep, fertile, loam or sandy loam with good drainage is considered well for successful peach cultivation. Poorly drained soil should be rejected for peach cultivation.

1.    Postharvest Losses of Fruits and Vegetables
    
2.    Minimization of Postharvest Losses
    
3.    Postharvest Management Practices
    
4.    Selection of Varieties
    
5.    Harvesting
    
6.    Sorting /Grading
    
7.    Washing
    
8.    Trimming
    
9.    Curing
    
10.     Delatexing or De-sapping
    
11.    Waxing
    
12.    Pre-cooling
    
13.    Hot Water Treatment
    
14.    Postharvest Disease Management
    
15.    Regulation of Ripening
    
16.    Sprout Inhibition
    
17.    Packaging
    
18.    Transportation
    
19.    Marketing
    
20.    Storage
    
21.    Conclusion
        
References

Soil pollution happens when we destroy the thin layer of healthy and productive soil, which covers the earth’s surface. Most of the world’s food is produced using this resource and if we don’t protect it the world’s farmers will be unable to grow enough food to support the worlds people.
 
Healthy soil depends on bacteria, fungi, and small animals (such as worms) to break down wastes in the soil and release its nutrients which help plants grow. The over use of fertilizers and pesticides can limit the ability of soil organisms to process wastes, which in turn makes the soil less productive or in the worst case scenario useless or even poisonous. 

Introduction

Impact Assessment can be broadly defined as the prediction or estimation of the consequences of a current or proposed action (project, policy, technology). Emergence of EIA can be related to National Environmental Policy Act (NEPA) of 1969 in the USA. This act is now considered as model legislation for implementation all over the world. Today we have more than 100 countries that have adopted EIA legislation. EIA requirements of aid agencies and funding agencies are typically based on the principles included in the NEPA. In any project planning, along with the traditional technical (engineering) and economic considerations the NEPA requires environmental impact considerations. Environmental impact statements (EISs) are prepared as action forcing mechanism in NEPA that describe the environmental consequences of major actions which significantly affect the quality of human environment. Thus, the primary purpose of EIA is to encourage the environmental considerations in planning and decision making process. Finally, it is expected to arrive at actions which are more environmentally compatible.

Introduction

The state of Maharashtra now again reels under the scarcity of water. Geologically, major part of the state is covered by Deccan basaltic flows. This basaltic terrain, as such, has been labelled notorious as far as the availability of groundwater is concerned. Uncertain availability of groundwater in the terrain is due to heterogeneity in the nature of piles of basaltic flows which adversely affects the geohydrological characters of the rocks.

The area understudy is unfortunately, a part of basaltic terrain in which no storage structures like major dams or medium projects have been constructed across the existing rivers. Consequently, the irrigation in the area and domestic needs of the people solely depend on whatever water is available in the existing dug wells. The wells do not suffice the need of the people because the percolation of water in the wells is not adequate in major part.

INTRODUCTION

The agriculture in north eastern hill region of India is mainly rainfed in nature and shifting cultivation, known as jhuming, is the dominant farming system. The shifting cultivation is detrimental to both soil and vegetation as it is connected to heavy soil and nutrient losses when practised in steep slopes. The burning and slashing operations are responsible for reduced floral and faunal diversity in the region. It is a well known fact that climate is the main driving factor that governs the sustainability of other natural resources such as land, water and vegetation. So far the NE region gets abundant rainfall for survival of the crops at least during the kharif season. The rainfall starts early March and continues up to the late October. The jhum cultivators follow the rainfall trend and get their field ready for sowing of seeds by early March itself so that vegetative stage of crops gets plenty of rainwater for growth and development. Due to increased population pressure, the hills of NE region are over exploited and the jhum cycle has been reduced from 10-12 years to 4-5 years now-adays. Hence the soils do not get sufficient time to revitalize it and are subjected to more and more exploitation and get degraded permanently.

Abstract

The frequently recurring earth tremors / Seismicities in parts of Tamil Nadu & Kerala and the earthquakes of higher magnitude in Central India in the recent years have gradually dissolved the concept of shield area stability for the South India and the concept of mid-plate seismicity has emerged in the minds of geoscientists, Hence, the geoscientists have embarked into a number of studies to bringout seismotectonic maps for South India. In this context, a detailed studies have been carried out by the authors in parts of westernghats (Kodaikkanal and Varushanad hills) in Tamil Nadu. In the said study lineaments were interpreted using high resolution IRS satellite data and from the lineament pattern, isofracture, lineament density and lineament interaction intensity the strain maxima axes were drawn. Such strain maximas were observed to fall in N- S, E – W and NE –SW directions. These strain maximas were found to coincide with various drainage anomalies, like radial, compressed meandering and eyed drainages indicating that these lineaments are prone for seismicity/ earth tremors.

Abstract

The coastal regions are always tectonically active since these form the junction between the continental and oceanic plates. These tectonic activities and the resultantly tutored fluvial and marine geomorphic processes and the independent fluvial and marine geomorphic processes carve out the coastal morphology. And if these coastal geomorphic features are studied, it will lead to the understanding of the morphotechtonics. One such a study carried out for a part of Ganjam coast, revealed various geomorphic anomalies viz: presence of high order hill ranges only in the north eastern and south western parts of the area with the central plain, northerly migrating Ganjam river, development of wide beach ridges only along the central plain, all indicating the Late Quaternary upliftment of the central plain.

Introduction

The Indian subcontinent is vested with nearly 9,000km long coastline both in its eastern and the western continental margins. These coasts provide unique configuration with convexities (land protruding into the coast), concavities (vice-versa), deltas of different morphologies, beach ridges and swales, bay mouth bars, peaks, serrations and projections in the shorelines, all indicating the vibrant tectonic, fluvial, marine and aeolian processes. As the coastal zones in general, form the boundaries between the continental and oceanic plate margins, these are inherent weak zones prone to tectonic activities, which in conjunction with other geomorphic processes, provide unique architecture to the coasts with above varied geomorphic features. That too, the Indian coasts were inferred to stand as testimony to the vibrant tectonic activities and other related geodynamic processes of the Quaternary period (Ramasamy, 1989; Ramasamy, 1999).

Econometrics : Mathematics and sophisticated computing applied to economics. Econometricians crunch data in search of economic relationships that have statistical significance. Sometimes this is done to test a theory; at other times the computers churn the numbers until they come up with an interesting result. Some economists are fierce critics of theory-free econometrics.

Economic Appraisal : See Economic evaluation.

Economic Burden of Disease : See Cost of Illness.

Economic Competition : The effort of two or more parties to secure the business of a third party by offering, usually under fair or equitable rules of business practice, the most favorable terms.

Economic evaluation (Economic appraisal) : The comparison of alternative courses of action in terms of their costs and consequences, with a view to making a choice.

Economic Evaluation : The systematic appraisal of costs and benefits of projects, normally undertaken to determine the relative economic efficiency of programs. See also Cost-benefit analysis, Cost-effectiveness analysis, Cost-minimization analysis, Cost-utility analysis.

Economic indicator : A statistic used for judging the health of an economy, such as GDP per head, the rate of unemployment or the rate of inflation. Such statistics are often subject to huge revisions in the months and years after they are first published, thus causing difficulties and embarrassment for the economic policymakers who rely on them.

In this chapter, we describe the methods of preparation of some of the buffers, most commonly used in the assay of enzymes required for plant physiological and histochemical studies.

The buffers have been arranged in an alphabetical order starting with their names. These methods are not necessarily identical with those of the original authors. It is advised that the users should re-determine the titration curves of majority of the buffers. These buffers have also been listed in Method in Enzymology, Vol. 1 (1955), pp. 138-146.

The word ‘social forestry’ was coined by J. C. Westoby and used in the ninth Commonwealth Forestry Conference at New Delhi in 1968. In India the term was first used by the National Commission on Agriculture, Government of India in 1976, to denote tree raising programmes to supply firewood, small timber and minor forest products to rural population. Prasad (1985) defined social forestry as forestry outside the conventional forests which primarily aims at providing continuous flow of goods and services for the benefit of people. This implies that the production of forest goods for fulfilling the needs of the local people is social forestry. Thus, conceptually it deals with the people to produce goods such as fuel, fodder, small timber, etc. to meet the needs of local community particularly the underprivileged section (Shah, 1988).