eChapters

As the vulnerability of different plant species to frost and low-temperature stress is quite variable, the symptoms are also variable, therefore. The development of visual symptoms depends largely upon the plant genotype, growing environment and tissue type being exposed to low-temperature stress.

All the plant biochemical processes are sensitive to change in temperature. Freeze or low-temperature stress in plants becomes lethal when the temperature is lowered beyond a critical threshold for a sufficient duration to cause irreversible damage to plant growth and development. This stress influences countless biochemical reactions which have certain temperature optima for their proper functioning.

During winters, many of the evergreen species growing in the subtropics suffer chilling or freezing damage and the extent of damage however, depends greatly on their ability to perceive the low temperature stimulus and the capacity to modify the physiological or biochemical functioning at the molecular level;

As discussed in previous chapters, the damage to the plants due to frost occurs as a result of frost-induced freezing and not merely because of the low temperature exposure. The cells of sensitive plant species get injured when the temperature drops below a critical level. When the damage caused is associated with sub-zero temperature, it is called freezing injury. And, when it is caused due to a temperature above 00 C, it is called chilling injury.

Earlier, it was a general perception that frost is something like snow that falls from the sky onto the Earth and causes cooling of the plant surface leading to freezing and lethal damage. But, with advancement in knowledge, it is now well understood that it is the cooling of a surface to a subzero temperature which leads to solidification of the water vapours present in the air onto it resulting in the formation of a white crystalline layer of ice molecules. The ice so formed further grows into the plant system causing damage to it through intracellular or intercellular freezing.

Frost is a thermodynamic phenomenon that occurs in the atmosphere, especially under subtropical and temperate conditions during winter. To understand the horticultural implications of this meteorological event, it is necessary to understand the frost related terms and jargon, first. Some of the common terms used here in this book are described hereunder:

Fruit and nut crops have adapted to a wide range of soil, climate and moisture conditions irrespective of their place of origin. The limits of the distribution of these crops across the globe are largely governed by climatic factors such as temperature, wind direction, solar luminance level, length of day (latitude) and atmospheric water vapour content besides other factors. These climatic factors are considered critical in governing the distribution of plant species because not only they limit the growth and development of plant species but also determine the consistency of annual cropping and the quality output. 

Appendix 1 : Syllabus (For the Degree of Bachelor Of Veterinary Science And Animal Husbandry (B.V.Sc. & A.H.)

Behavior can be defined as an expressed course of action produced in organisms in response to stimulus from a given situation. Alternatively, behaviour may be defined as the response by the animals to internal and external stimuli. Behaviour is a significant indicator of the health of animals. The goal of all behavioral responses is common i.e. to survive and reproduce.

Ecophysiology is the branch of physiology which aims to define the adaptive features of an organism which fits it to its environment. Most of the time the environment in which the animal lives is a difficult one, hence the requirement of adaptation to environment. Environment is defined as the surroundings in which the organism lives.

Domestic animals –including chicken and mammals, belong to the category of homeotherms, as opposed to poikilotherms. Homeotherms or warm blooded animals are those which are able to maintain constant body temperature in the face of varying environmental temperature. The poikilotherms or the cold blooded animals change their body temperature according to the temperature of the surroundings.

Growth is a correlated increase in the mass of the body in definite intervals of time, in a way characteristic of the species i.e. increase in size and weight. This means growth includes the protein, fat and mineral deposition in the body. Growth is an irreversible increase in the metabolically active protoplasm. There is a characteristic rate of growth for each species and a characteristic adult size and development. Maximum size and development are fixed by heredity and nutrition is an essential factor determining whether this maximum will be reached. An optimum nutritional regime is the one which enables the organism to take full advantage of its heredity.

Lactation is the process of milk secretion by the mammary gland. Lactation is the final phase of the complete reproductive cycle of mammals. Newborns of most species are dependent on maternal milk during the neonatal period. Lactation is therefore essential for survival of the species.

The male reproductive system consists of a pair of testes that produce sperm (or spermatozoa), ducts that transport the sperm to the penis and glands that add secretions to the sperm to make semen. The adult mammalian testis performs two important functions, spermatogenesis and male sex hormone production. It is an organ structurally designed to produce the haploid male gametes from diploid postnatal germ-line stem cells, i.e. type A spermatogonia.

Reproduction is essential for the survival of the species but not for the survival of the individual. The female reproductive system is entrusted with the responsibility to produce female gametes ie ova and hormones that regulate and integrate the functional activity of the female reproduction.

Endocrine glands are organs which secrete chemical substances called hormones into the bloodstream. Hormones are chemical substances that are produced in one tissue, released into the bloodstream, and carried to other tissues, where they act through specific receptors to bring about changes in cellular activities. The term hormone is derived from the Greek root meaning to excite.

Animal body contains several fluids other than blood and lymph which have specialized functions for specific organs. Two of these fluids are cerebrospinal fluid and synovial fluid. The cerebrospinal fluids protects and supports brain and spinal cord function. Synovial fluid protects the functioning of the movement of the body by bone-muscular joints.

A large proportion of the body of mammals including domestic animals, is made up of water. This water is an essential attribute for the life of the animals. Animals deprived of food but provided water will survive much longer than the animals provided with food but deprived of water. Water is the basis of the liquid environment of the cells, which Claude Bernard called the milieu interieur, and Cannon the fluid matrix.

Substances which are in excess of the body and/or are harmful need to be removed constantly. This function is carried out by the excretory organs which include skin, gastrointestinal tract and kidney. Skin excretes water and salts in the form of sweat. Gastrointestinal tract removes undigested food material as well as some heavy metals in the form of faeces. Kidneys are the main excretory organs which together with a pair of ureters, a urinary bladder and urethra constitute the excretory system. Renal function is essential for homeostasis.

The primary role of the respiratory system is to provide O2 to the tissues for metabolic needs and remove the CO2 formed by them. Body needs oxygen to oxidise the food nutrients and derive energy. In this process carbon dioxide is produced in the body, which is toxic and must be removed quickly and efficiently. The oxygen utilization & carbon dioxide production takes place within the mitochondria of cells of the various tissues.

Digestion is the process by which food is converted into substances that can be absorbed and assimilated by a living organism. In most animals it is accomplished in the digestive tract by the mechanical and enzymatic breakdown of foods into simpler chemical compounds. Digestion usually consists of two elements: a mechanical/ physical stage, e.g. mastication, churning, emulsification, in which no chemical bonds are broken and no enzymes are required; and a chemical stage requiring enzymes in which complex food molecules are broken down by hydrolysis into a state in which they can be absorbed.

Detection of sensations allow the body to be aware of changes (or stimuli) that occur in the environment or inside the body. These senses permit the central nervous system to produce reactions for the stimuli and maintain body homeostasis. Somatic senses (“soma” means body) detect touch, pain , pressure, temperature, and tension on the skin and in internal organs. Special senses detect the sensations of taste, smell, hearing, equilibrium, and sight, only in special sense organs in the head region. All senses are detected by sensory receptors, and after integration and processing being done in the central nervous system, motor nerves produce a response.

A neuron is the basic unit of nervous tissue. It is specialized for the function of reception, integration and transmission of information in the body. The nerve cells are excitable, i.e. capable of generation of electrical impulses at their membranes. The electrical impulses generated in the excitable tissues, in most instances, can be used to transmit signals along the membranes.

The muscular system allows movement and necessary functions such as circulation, digestion, and breathing. It is made up of muscles and connective tissue, such as tendons. The muscular system also helps provide support and shape. In the body, muscles have primary functions to provide motion, maintain posture, and generate heat.

Transport systems are crucial to survival. Unicellular organisms rely on simple diffusion for transport of nutrients and removal of waste. Multicellular organisms have developed more complex circulatory systems. The circulatory system is responsible for the transport of the various essential compounds and other factors around the body, as well as the removal of the metabolic wastes that accumulate in the tissues from body activities to places of elimination.

The heart is a muscular structure that contracts in a rhythmic pattern to pump blood. The heart functions as a pump to provide a continuous circulation of blood throughout the body.The blood vessels that take blood from the heart to the various tissues are called arteries.Arterioles open into a network of capillaries which constitute the microcirculation. Circulation of blood in the body is important for the transport of nutrients to all parts of the body and for the transport of gases and waste products. The primary function of the heart is to transfer sufficient blood from the venous system to the arterial side of the circulation under sufficient pressure to maintain the circulatory needs of the body.

Blood is the fluid pumped by the heart that circulates throughout the body via the arteries, veins, and capillaries . Blood is a body fluid in animals and human beings that delivers necessary substances such as nutrients and oxygen to the cells and transports metabolic waste products away from those same cells. Hematology is the science or study of blood, blood-forming organs and blood diseases.

The word physiology initially meant for that branch of biology which deals with the function of living organisms.Physiology can be defined as the study of mechanisms of body functions. Physiology is concerned with the way the various systems of the body function and the way each contributes to the functions of the body as a whole.Thus, physiology not only seeks to define the functions of living organisms like feeding, digestion, respiration, transport of gases in the blood, circulation and functions of the heart, excretion and kidney functions, muscle and movement, reproduction etc but also seeks to answer to ‘why’ and ‘how’ all these functions are regulated.

M/s. AARPY BIO SOLUTION

M/s. ABAN INFRASTRUCTURE LIMITED

M/s. ABHAY-CHEM

M/s. ABIOCIS BIO-SCIENCE PVT LTD

M/s. ABT CORPORATION

1. M/s. SALEM MICROBES PRIVATE LIMITED No: 21/10C, Bajanai Madam Street Gugai, Salem - 636 006 Mobile: +91 - 93448 37525, 70106 96630; Phone: +91 - 427 - 2469928 Email: salemmicrobes@yahoo.co.in, contact@salemmicrobes.com

Many chemistry principles are abstract (for example, carbonatebicarbonate buffering) and difficult to grasp. However, a fundamental understanding of the concepts and chemistry underlying the interactions of pH, CO2 , alkalinity, and hardness is required for an effective and profitable pond management. It is impossible to avoid; water quality is water chemistry.

Interactions of different chemical components affect water quality in shrimp ponds.

The preservation methods used for water samples differ depending on the experiment to be performed, and they are as follows:

Phytoplankton populations are important in shrimp ponds because they aid in shrimp nutrition and the removal of excess nutrients from the pond environment. They can be beneficial or have potentially negative consequences, depending on how they are managed.

Although it is the fourth most abundant element in the earthís crust, it is found in very low concentrations in surface waters and the ocean. It is found in many enzymes that are involved in energy transformations, making them necessary for bacteria, plants, and animals.

Salinity is a measure of the total concentration of dissolved solids, which is usually expressed in parts per thousand (ppt). Chloride, sulphate, bicarbonate, and bromide are anions (- charged). Cations that are positively charged are sodium, magnesium, calcium, potassium, and strontium. The main solids are sodium and chloride.

The presence of humic acids, fulvic acids, metallic ions, suspended matter, plankton, weeds, and industrial effluents all contribute to the colour of natural water.

Since shrimps live and grow in water, water quality has an impact on their growth and survival. Water of good quality means that the parameters influencing shrimp growth and survival rates are within the optimal range of shrimp requirements. Each water quality parameter can have a direct impact on the health of the animals. Shrimp suffer from stress and disease when exposed to improper levels of dissolved oxygen, ammonia, nitrite, or hydrogen sulphide. Water quality parameters, however, influence each other in the complex and dynamic environment of aquaculture ponds. 

Millets are essential grains that help developing nations in Asia and Africa’s semi-arid tropics, particularly India, Nigeria, and Niger, achieve food and nutrition security.They are grown on soils that are usually too weak for any other crop to grow. They can withstand drought, minimal fertiliser treatment, and temperature swings better than other cereal crops, and their short growing season makes them exceptional. Millets are all-season crops that can be grown all year and provide several security benefits (food, feed, health, nutrition, livelihood, and the environment), making them the most cost-effective agricultural security crop. Sorghum (Great millet), Bajra (Pearl millet), small millets such as Korra (Foxtail millet), Ragi (Finger millet), Kodo millet, Proso millet, Little millet and Barnyard millet are all important millet crops grown in India.

Vegetable oils and fats play a very important role in our diet. They provide essential fatty acids which are precursors of important hormones such as prostaglandins. They control many physiological factors such as blood pressure, cholesterol and reproductive system [1]. Coconut oil is a popular vegetable oil obtained from kernel of fruit coconut (Cocos nucifera). It is liquid at room temperature and bland in taste. Coconut oil is extensively used in cooking purpose in coastal tropical regions although it has been used in abundance for its medicinal properties.

Cooking oil when heated there will be some changes like its colour, flavour, smoke formation etc. One change is the change in total polar compounds (TPC). TPC is used to measure the quality of oil. The TPC value increases with the reheating of oil, higher TPC value means the oil having high contain of peroxide and hydro peroxide. FSSAI fixed the value of TPC at 25%, beyond of this value the cooking oil can causes health issues like hypertension, atherosclerosis, Alzheimer’s disease , liver disease even liver cancer.

Snack foods have become an essential part of the diet throughout the World and they are prepared from natural ingredients or components to yield products with specified functional properties. Extrusion cooking technology getting more popularity over other traditional processing technologies because extrusion shows continuous efficient cooking, mixing and forming process.

Quinoa (Chenopodium quinoa Willd.) is a part of “Chenopodiaceae” family. Up to 250 species of Chenopodium have been identified to date. Quinoa is a South American grain that has been farmed in the Andes for thousands of years, particularly in Peru and Bolivia. It is considered as a sacred plant because of its abundance in protein and essential amino acids (Jancurova et al., 2009). Quinoa is distinguished by its excellent adaptability to a diverse variety of land and environmental variables. Both leaves as well as the grains are considered as the edible parts. However, the quinoa grains have been extensively studied and economically explored (Rocha, 2008).

Developing a nutraceutical or functional food is becoming mandatory as looking at the current nutritional status of the population over the world. Nutraceutical foods are proven to cause several health benefits to people. Hence the basic aim behind developing the nutraceutical chocolate bar was to fulfill the nutritional demands and provide some additional benefits to people. The product mainly contains two key ingredients that are, Drumstick (Morings oleifera) which has the most qualities to call a Superfood” and Quinoa (Chenopodium quinoa) which is referred to as “Mother of all grains”.

Cellulose is a homopolymer of β (1–4) glucose linkage. It is the most abundant polymer present on the surface of the earth, which is mainly produced by the vascular plants (Sharma et al., 2019; Dayal et al., 2013; Sheykhnazari et al., 2011). Cellulose obtained from higher vascular plants has been employed for making textile and papers.

Wood apple (Feronialimonia) commonly known as Bael in various Indian sub-continent languages is the most under-utilised fruit despite of its aromatic flavor, high nutritional components and important medicinal values. Reason may be due to challenge in harnessing the pulp from the fruit. It is considered under seasonal fruit but it has long duration of shelf-life as compared to other fruits.The physic-chemical characteristics revealed that it has high shell weight of 55.67% as compared to pulp weight of 43.77% (Devi et al. 2018).

Dehydration (or drying) is defined as ‘the application of heat under controlled conditions to remove the majority of the water normally present in a food. The main purpose of dehydration is to extend the shelf life of foods by a reduction in water activity. This inhibits microbial growth and enzyme activity, but the processing temperature is usually insufficient to cause their inactivation. Therefore any increase in moisture content during storage, for example due to faulty packaging, will result in rapid spoilage.

Abstract

The objectives of the study is to help to create self-employment and provide proper information for different conventional milk based products. Traditional dairy foods have always played a crucial role in preservation of precious milk nutrients and promotion of its use among masses. The demand for milk and milk products is increasing with increasing of world's population. To meet these needs, high-end technology is needed for emerging the capability of milk production and preserving it by producing high quality milk products. The dairy industry is highly localized owing to perishable nature of milk products. Approximately 50% of the total milk produced in India has been projected to be processed into a variety of conventional milk products, such as khoa, chhena, paneer, dahi, ghee, kalakand and a wide range of sweets in rural areas mostly by the rural citizens. Therefore, setting up a milk-based food production system and updating conventional technologies to manage milk-based products on a commercial scale is very important.