eChapters

The classification of the farming systems of developing regions may be based on the following criteria:

• Available natural resource base, including water, land, grazing areas and forest; climate, of which altitude is one important determinant; landscape, including slope; farm size, tenure and organization; and
• Dominant pattern of farm activities and household livelihoods, including field crops, livestock, trees, aquaculture, hunting and gathering, processing and off-farm activities; and taking into account the main technologies used, which determine the intensity of production and integration of crops, livestock and other activities.

Resource use efficiency in Indian agriculture

Resource use efficiency in agriculture is defined to include the concepts of technical efficiency, allocative efficiency and environmental efficiency. Public investment, subsidies and credit for agriculture are used in an efficient manner. There are large scale inter regional as well as inter farm variations in factor productivity due to varying influence of different factors in different regions. A number of management factors such as timeliness and method of sowing, transplanting, irrigation and application of right doses of inputs and input mix play an important role in influencing inter-farm variation in crop productivity. Growing marginalization and fragmentation of land holdings coupled with rising incidence of informal tenancies and poor rural infrastructure such as road, electricity, markets and education affect factor productivity. The availability of good quality irrigation water coupled with flexibility of irrigation and drainage system and appropriate methods of application as well as pricing of irrigation water is crucial for sustainable use of land and water resources.

The stochastic frontier production function to analyse the resource use efficiency of urban farmers in Uyo, Southeastern Nigeria was done. The result shows that 65% of urban farmers were 70% technology efficient; maximum efficiency is 0.91, while minimum efficiency in urban farm is 0.43.

Pre-dominant farming systems in various regions of India

The quick survey conducted as a part of characterization of existing farming systems throughout the country indicates existence of 19 pre-dominant farming systems with majority as crop + livestock (85%). Although crop + livestock system is dominating in the country, based on the per cent contribution to net income, the systems are classified as crop, horticulture, livestock, fisheries dominant systems where in dominant component contributes more than 50% of the total net returns. Accordingly, it was found that crop dominant farming systems are existing in the states of Andhra Pradesh, Bihar, Chhattisgarh, Goa, Haryana, Jammu and Kashmir, Jharkhand, Kerala, Karnataka, Madhya Pradesh, NorthEast, Maharashtra, Orissa, Punjab, Tamil Nadu, Uttar Pradesh and Uttaranchal while livestock dominant systems are present in Rajasthan and Parts of Gujarat. West Bengal, parts of Odisha and Assam states have the fisheries as a major source of income to the existing farming systems. The scope for promotion of horticulture (fruit) based systems exists in Jammu and Kashmir, Himachal Pradesh, Maharashtra, parts of Uttar Pradesh and in Sikkim while plantation dominant systems are available in Andaman and Nicobar Islands and Kerala. In selected states and locations, highly diversified systems also exists where in none of the component contributes for 50% or more to the returns. The characterization survey data of existing farming systems in different states/zones are being interpreted and brought out in the form of National Atlas on Farming Systems. Though the various farming systems exists in the country, integration of input and output within the system is either completely lacking or at partial integration. Competition exists within and outside the farm for various byproducts generated. Cow dung is the best example as dung is required for improving the fertility of soil and meeting the household fuel. Hence, synergy needs to be made by appropriate allocation for making farming as a profitable option. Sustainable farming systems should aim for long term productivity, profitability, recycling of resources and employment generation. The monetary returns under different farming systems practiced in different parts of the country are given in Fig 1. Among the various existing systems in the country, coconut +banana+ cocoa +pineapple + nutmeg (FS9) gives the higher return of Rs 1.27 lakhs/annum.

Agriculture has under gone drastic changes from the mid 1960s through the introduction and application of various newly developed techniques in agro science such as crop and water management practices, Emphasis has been given to be integrated system approach in crop production.

It is essential to plan and implement rational policies to minimize the regional imbalances of agricultural production. The present growth in crop production has to be sustained considering ecological and economic factors. The existing as well as emerging frontiers must be examined to enhance agricultural growth on a sustainable basis. The understanding of agroclimatic relationship through crop weather conditions, soil fertility, water use efficiency, rain water management and appropriate cropping patterns based on regional resources potential must be emphasized more over agro forestry, integrated crop management, biotechnology and use of renewable energy must be emphasized for use in environmentally harmonious agriculture. Training of farmers has to be adapted to be changing technological environment.

The forest affects soil and water in many ways. Leaves and branches decreases wind strength, alter the absorption of solar radiation, and increase the surface area for evaporation. The root growth and the decomposition of plant organic matter by soil fauna and microbes, modify soil texture and structure, affecting water penetration and drainage. Changes in vegetation cover can therefore have a significance influence on the hydrological cycle and climate system.

The study area consists of the state of Punjab, Haryana, Himachal Pradesh and Jammu & Kashmir. On the basis of physiographic and soil resources, this zone is clearly divisible into two sub zones; the plains of Punjab and Haryana and the highlands. Based on altitude soil type, geology, and rainfall each of these two sub zones may be further subdivided. Major sources of water in the region, in addition to rainfall and river, are lakes and ice crops of glaciers and undergrounds springs. Under ground water is largely concentrated in the plains of Punjab and Haryana. The region covers a varied land use, from highly intensive monocultures through rotational and intercropping to grazed rangeland and near natural forests.

The increasing awareness of the deleterious effects of indiscriminate use of chemical fertilizers and pesticides in agriculture has led to the adoption of organic farming as an alternative method for conventional farming world-wide. It is gaining gradual momentum across the world and the growing awareness of organic food which is emerging as an attractive source of rural income generation especially in integrated farming systems.

In north west India where rice-wheat, cotton-wheat and pearl millet-wheat cropping systems are most prevalent. But now, these cropping systems are not proving farmers’ friendly due to higher water requirement, declining yield, susceptibility to insects and pests and adverse effect on soil health. Moreover, in the new millennium with the growing demand of agricultural commodities in national as well as international market due to ever increasing population and globalization, Indian farmers are forced to produce higher quantum of quality agricultural commodities at low cost from shrinking land and natural resources.

Mungbean - wheat cropping system requires less water and hence, can be grown in areas where water availability is limited in addition to beneficial effect of mungbean to supply N to the succeeding wheat crop which are favorable for organic farming. Wheat (desi) also known as tall wheat requires less water and is very responsive to low doses of nutrients. The dwarf wheat grown by farmers with the application of chemicals in the form of fertilizers, weedicides, insecticides and pesticides is not preferred by people and therefore, the demand of organic wheat is rising fast in national and international market. This cropping system can be taken successfully in farming systems for higher monetary returns.

There is need to shift a portion of cultivable land with organic farming as an alternate practice technique. Organic farming gives emphasis on sustainability, environmental safety and low cost production techniques over chemical farming. Keeping the issues of 21^st century agriculture in view following aspects also shows importance of organic farming: Reduce the toxic load; keep chemicals out of the air, water, soil and our bodies; reduce if not eliminate off farm pollution; protect future generations; build healthy soil; taste better and truer flavor; assist farmers of all sizes; promote biodiversity; celebrate the culture of agriculture etc.

India is a varitable emporium of herbs. The medicinal use of plants was known to the inhabitants of India from time immemorial. As per Indian Materia Medica, a large number of vegetables, different parts and products of flora and fauna came into use for the treatment of diseases by ancient Hindus. Generally the practitioners, of various Indian system of medicines used to utilise the flora and fauna found in their environment and accept those which were found useful after trial.Ayurved comes from Atharvaveda. There are hundred fourteen hymns which describe some diseases and medicinal practices. This was the era around 2000 B.C. The books written on Ayurved were rewritten by ‘Charak’. It is known s ‘Charak Sanhinta’. They were written in eight volumes having hundred twenty chapters in Sanskrit Sushrut wrote in similar way under the name of ‘Sushrut Sanhita’ having ten thousand verses in six-volumes under one hundred eighty six chapters. He described ‘Surgery’. Kashyap wrote on ‘Paediatrics’ and Vatsayana wrote on ‘Sexology’. Hence, very rich and old heritage of Ayurved is prescribed and documented in Hindu Vedas. This was the age when art of ‘Pharmacy’ was introduced. There after came the ‘Creative age’, when the active principles of medicinal drugs were adopted. According to Charak, in the Chapter ‘Kalpasophan’, the drugs differ with respect to land, season, source, flavour, taste, potency, post digestive effects and specification and also with respect to their body, morbid tendency, constitution, age, vitality, gastric fire, proclivities, homologation and stage of diseases.Accepting those ideas in 1864 with the help of the then king of ‘Jamnagar’ the famous Baidya, Jandu started a small factory (Rasasala) in Jamnagar. Then in 1910 Jandu Pharmaceutical works was established in Bombay to manufacture Ayurvedic medicines in large scale. Thereafter many small factories were started in different parts of India. The vedic period around 1800 B.C. The classic period of the Indian medicine begins about 600 B.C., where the treatments of various types of ailments have been indicated. Due to Industrial evolution and general economic growth in Eastern countries, there was growth of a systematic Eastern Medicine. Gradually people started to develop confidence in allopathic and ayurvedic medicines were neglected.Many allopathic medicines which were established as life saving drugs, were later found to be harmful to humans. Such medicines have been proved to have side effects which cause damage to health. The modern man of scientific C1ptitude again tries to rotate the wheel of history in search of an alternative source/truth from natural resources. With this view many attempts have been made in India and abroad to unravel the truth, described in Vedas with regards to medicinal effects of flora and fauna. Although the Allopathic medicines are found to dominate over the Ayurvedic medicines, many remote areas of tribals are still continuing the traditional practice of using medicine from their natural surroundings.

Orissa is a land of tribes and one of India’s most important forests state providing home to a very large forest dependant tribal population. Represented by 22.5% of the total population of the states of tribes of orissa, which are scheduled as 62 different ethnic groups (Biswal et al., 1997). The orissan ethnographic scenario includes as many as 62 scheduled Tribes are enlisted in the presidential orders numbering 5,915,067 persons in 1981 census constituting 22.43% of the total population of the state (26,370 and 21). Distribution of tribal population in the district during 1981 census was uneven. Their number was more in inland districts like koraput, Mayurbhanj, Sundargarh, Keonjhar, Phulbani and Kalahandi than in the coastal plain consisting of Balasore, Cuttack, Puri and Ganjam (Mohanty and Chowdhury, 1990). Different tribes exists in orissa are namely divided into three groups on ethnolinguistic basic (i) Austro-Asiatic (ii) Dravidian and (iii) Indo-Aryan (Behura, 1993). The important communities are Saora, Bathudi, Bhumija, Bhuiyan, Saunti, Gond, Kharia, Kandha, Kisan, Kolha, Munda, Oraon, Paraja, Santal, Saora and Shabar (Behura, 1993). From different district of Orissa different ethno botanist worked on geographical basis or on a particular tribe, on a particular plant, food habit, and religious occasion, social customs etc. district wise enumeration is given below.

Jain, (1971) studied magico-religious beliefs pertained to plants prevalent among different tribals of the state. Rai chaudhuri et al., (1975) reported ethno botanical uses of 38 species from the state 81 plant species used by the rural folk for antifertility, as medicine, fibre and food were reported by (Saxsena and Dutta, 1975). Saxsena et al., (1981) gave an account of ethnobotany of 83 plant species.

Cloud with dense forest and valleys the present Kalahandi district, Orissa comprises of ex–state of kalahandi and exzamindari of khariar minus Kasipur. The present district of Kalahandi district of Orissa state was a part of south Kasipur Kingdom. It continued as a princely state up to Nov. 1949 and then merged with orissa state the district Kalahandi was created out of exprinciply state of Kalahandi with addition of ex-zamindari areas of Khariar which formerly a part of Sambalpur district. Again Nuapada and Nawarangapur area separated from it and the present form of the district exist.

The modern Kalahandi district occupies the south western part of Orissa and is situated between 19 degree 10’ North Latitude and between 82 degree 30’ and 83 degree 50’ longitude. To the northern side of Kalahandi district Balangir, to south eastern side Rayagada district is situated. To south westen side Nawarangpur district, to the Southern side Koraput district and to north Nuapara district and western side Chhatisgarh are situated. The Kalahandi district extends over an area of 7920 sq. kms, which is 5.09% of total geographical area of Orissa and occupies 7th position in area of the state of Orissa. According to 2001 census, total population of the district is 13, 34,772 which has 3.64% of the whole state and density of population is 168 per sq. k.m. In the district, 2 subdivisions, 4 revenue Tahasils, 13 blocks, and 195 Gram Panchayats and 2205 villages are existing.

Medicinal plants constitute a group of industrially important crops which are of great value for domestic use and for export. Plant-best drugs are being increasingly preferred in medical science. The use of various parts of several drug plants to cure specific ailments has been in vogue from ancient times on our indigenous medicine.

We are fortunate to have rich heritage in the form of information available from tribal areas gathered by the tribals through experience of generation in the form of folklore medicine. It is however unfortunate that full potential of these crops has not been scientifically explored. As compared to agricultural crops on which researches have been done for getting better varieties for high yields diseases resistance and better quality comparatively, little work has been done on the medicinal plants. The Ethnomedicinal plants are enumerated in subsequent pages and in Table 1 with their local name and families.

In Comparison to Literature : A Comparative Account

In India many medicinal plants traditionally used by tribal and other sources have been recorded by different authors, workers and researchers. Many plants that can cause symptomatic relief for various ailments have also been established. Attempts have been made by different scientists to ascertain the active principles behind the herbal cure of certain diseases. Ayurvedic preparations from plant sources have been developed in our country to certain extent. Many Homeopathic medicines have also been procured from plants and herbs. Scientific conferences in State, National and International levels are being held on Traditional Asian Medicines to ascertain the scientific truth behind them. Council of Scientific and Industrial Research, New Delhi, Regional Research Laboratory, Bhubaneswar and many other Institutes of our country are doing creditable work to isolate the composition of medicinal plants. Many useful compounds have been isolated from different medicinal flora and their efficiency has been established scientifically. Good numbers of Allopathic medicines prepared on the basis of herbal cures are flooding in the market in different trade marks. Still the country is to find preventive and curative medicines for Cancer, AIDS, Thalsamia and other such deadly diseases. Recent International Conference on Cancer held at New Delhi came out with a suggestion that certain flora could be explored for the possibility of treating cancer without side effects. When we are starting to realize the importance of flora for a healthy living and scientists are in search of drugs from the vegetation to irradicate diseases deforestation is reampant in our country. Our environment has been contaminated due to various types of pollutants from industries and other anthropogenic sources. At this juncture man has to maintain a balance to achieve harmony of both the factors for our better living. The tribal dweller who is considered as the ‘Maa in the forest’ has to be recognized first so far his knowledge in medicinal plants is concerned. After ascertaining the utility of medicinal plants they are to be protected, propagated both by Government and Public. Scientific experiments are to be carried out to establish the active principles behind the herbal drugs. Herbal gardens are to be instituted at different places by adopting modern biotechnological methods. There is a need to make joint efforts by the workers from the fields of Allopathic, Ayurved and Homeopathic, as a step towards “the irradication of diseases”. Such an inter-disciplinary work on medicinal plants may throw a new light for achieving success, in finding out medicines without side effect. In this context, Pharmacologists have to play a vital role while preparing the doses of drugs from plant sources.

Abstract

Multi-commodity flours were prepared by blending rice flour, mung flour and potato flour with wheat flour in ratios of 0:0:0:100, 5:5:5:85, 10:10:10:70 and 15:15:15:55, respectively and packaged in glass jar, high density polyethylene and aluminium flexible packaging for biscuits development. The standardized formulations for biscuit had ingredients as 100 g flour/multi-commodity flour, 45 g sugar, 45 g hydrogenated fat, 1.25 g sodium bicarbonate, 1.25 g baking powder and 1.0 g curry leave powder. The biscuits were baked in convective baking oven at 180 > C for 10-15 min till baked. The well baked biscuits were removed from the oven, cooled to room temperature, packaged and stored under ambient condition. The physical quality (Mass, thickness, diameter, spread ration percent spread and bulk density), of biscuits were analyzed just after preparation under ambient condition. Results were also reported that the spread ratio of multi-commodity flour biscuits increased with decrease in the incorporation of wheat flour in multi-commodity flours. It is clear that spread ratio is mostly influenced by the diameter and thickness of biscuits.

Abstract

Food processing involves the transformation of raw animal or plant materials into consumer-ready products, with the objective of stabilizing food products by preventing or reducing negative changes in quality. Without these processes, we would neither be able to store food from time of plenty to time of need nor to transport food over long distances. Food processing has also gained its importance in the wide variety of diet among people throughout the globe and availability of exotic food items at various places. Processing of food items enhance the taste, flavor and aroma of the food thereby increasing the overall chances of its acceptability among the masses. So, it is essential to determine and recognize the database of physical and engineering (aerodynamic and mechanical) properties of these agricultural products because these properties play an important role in designing and developing of specific machines and their operations such as sorting, separating and cleaning, also to determine the optimum in seed metering device in pneumatic planter and precision sowing machine to suite every size of these grains.

Abstract

The knowledge of engineering (physical) properties constitutes important and essential data in the design of machines, storage structures and processes. The present investigation was carried out determine the physical parameter (diameters, mass, volume, density, sphericity, angle of repose etc.) of varieties KPS 10. The moisture content in green pea (KPS 10) was observed 411.77% (db). The average values of dimensional and geometrical parameter like length (D₁), width (D₂), height (D₃), AMD, GMD and SMD were found 9.517mm, 9.343 mm, 7.707 mm, 8.856 mm, 8.816 mm and 15.305 mm respectively. Mean values of mass of 1000 pea seeds, volume, bulk density and true density were found 329.501 g, 0.2 ml, 0.275 g/cm₃ and 0.304 g/cm₃ respectively. Average values of angle of repose, sphericity, porosity and moisture content were found 24.7, 0.926 %, 9.528 and 80.96%, respectively.

Abstract

The research work was conducted on the moisture dependent physical properties of kidney bean (White speckled kidney beans) were analyzed. Length, width, thickness varied between 1.53-1.90, 0.79-0.94, 0.58-0.76 cm for kidney beans, respectively. Arithmetic mean diameter and geometric mean diameter were 0.96-1.19 and 0.88-1.11 cm₂, respectively. Volume, Sphericity and surface area ranged between 0.44 -0.87 cm₃, 0.57-0.60 and 2.91-4.68 cm₂ for white speckled kidney beans, respectively. The kidney bean was soaked in normal water with initial moisture content 14.22 % (db) upto 270 min and attained the final moisture upto 83.23 % (ab).

Abstract

The frictional properties such as coefficient of friction and angle of repose are very important in designing of storage bins, hoppers, chutes, conveyors, harvesters and threshers etc. Angle of repose is the angle made with the horizontal at which the material will stand when piled. The angle of repose is also important in designing the equipment for mass flow and structures for storage. The static angle of repose (b) was determined using an open-ended cylinder of 150 mm diameter and 250 mm height. The higher the moisture content, the higher the cohesion between the seeds. In terms of flow ability, the seeds are heavier and the inertia to move is increased. Coefficient of internal friction is the frictional resistance of seeds with each other. Coefficient of external friction is the frictional resistance between the seeds and the surface. The rolling resistance is directly proportional to the weight of the rolling object and to the coefficient of rolling resistance which is dependent on the rigidity of the supporting surface and indirectly proportional to the effective radius of the rolling object. The air velocity at which an object remains in a suspended state in a vertical pipe under the action of the air current is called terminal velocity of the object.

Abstract

Rheological properties of dough from different flours are very important to know about the kneading and modeling process especially for development of bakery products. Rheological testing is helpful to examine the structural and fundamental properties of dough. The basic principle underlying evaluation of rheological properties are mechanical behavior of the dough, in conjunction with the physical structure of the dough, the molecular structure of the protein continuous phase in the dough and with chemical reactions of functional groups. This chapter presents some of the methods currently used in bakery industry for determining the rheological characteristics of the flour and the dough. The instruments such as Farinograph, Mixograph, Extensigraph, Alveograph and Amylograph, which are used for the measurement of dough rheological properties (due to visco-elastic behavior of dough) were described.

Abstract

The electromagnetic processing instruments such as microwave is very commonly used at house hold level, hence understanding the behavior of food as well as factors affecting its dielectric properties becomes important. Dielectric properties (DEP) play an important in electromagnetic processing of food products and mainly depend upon the moisture content, physical properties, composition, temperature and power applied. Different methods have been used to determine the DEP of food material including parallel plate, coaxial probe, resonance cavity, transmission line and free space method. The selection of these methods is again based on several factors such as type of materials, accuracy of measurement, the scope of the research, frequency range, availability of equipments and resources. Present study thus summarizes the importance of DEP of food, influencing factors and the different measurement techniques.

Abstract

Thermal properties of food are its ability to conduct, store and lose heat. These properties are inherent in food processing and preservation practices. Thermal properties are important for modelling processes, engineering design of processing equipment, sterilization and aseptic processing. Important thermal properties are thermal conductivity, specific heat and thermal diffusivity. These properties depend on chemical composition, water fraction and temperature.

Introduction

Thermal properties are involved in almost every food processing operation. It is essential to have knowledge of thermal properties of foods which is important in analysis and design of various food processes and food process equipment involved in heat transport. Thermal properties of food are greatly depending on composition, temperature and density of food. Thermal properties required for heat transfer calculation include specific heat, enthalpy, thermal conductivity and thermal diffusivity. Thermal properties of foods are related to heat transfer control in specified foods and can be classified as thermodynamic properties (enthalpy and entropy) and heat transport properties (thermal conductivity and thermal diffusivity). Thermo physical properties not only include thermodynamic and heat transport properties, but also other physical properties involved in the transfer of heat, such as freeze and boiling point, mass, density, porosity, and viscosity. These properties play an important role in the design and prediction of heat transfer operations during the handling, processing, canning, storing, and distribution of foods.

Abstract

Quality assessment of fruits and vegetable before marketing and processing is an essential task. Various destructive and non-destructive methods have been investigated to achieve this goal. Among the several prevalent noninvasive methods, optical properties measurement methods also promotes for nondestructive quality inspection of fruits and vegetables. The optical properties of biological tissue are, therefore, very importance important for getting sample information and data quantification of the inside of the material. The main goal of this chapter is, thus, to introduce fundamental concept of optical properties, its principle and application in fruits and vegetables. The discussion of electromagnetic radiation for better understanding of the nature of light has also been explored.

Introduction

Sem (Dolichos) bean, Hyacinth bean or Field bean is one of the most ancient crops among cultivated plants. It is a bushy, semi-erect, perennial herb, showing no tendency to climb. It is mainly cultivated either as a pure crop or mixed with finger millet, groundnut, castor, corn, bajra or sorghum in Asia and Africa (Maass et al., 2010). It is a multipurpose crop grown for pulse, vegetable and forage. The crop is grown for its green pods, while dry as well as fresh green matured seeds are used in various vegetable food preparations, as most of the nutritive value is concentrated in the seeds. FAO website reports that Dolichos lablab (field bean) is a dual purpose legume. It is traditionally grown as a pulse crop for human consumption in south and south-east Asia and eastern Africa. Flowers and immature pods also used as a vegetable. It is also used as a fodder legume sown for grazing and conservation in broad acre agricultural systems in tropical environments with a summer rainfall. Also used as green manure, cover crop and in cut and carry systems and as a concentrate feed.

Abstract

The chapter aims at introducing selected physical properties of food and biological materials in food process and application in the field of food technology. These physical properties of food are not only used for designing of food equipments but can also maintain the nutritive value of food to a greater extent during processing in these equipments.

Introduction

The investigation of food engineering is spotlighted on the inspection of equipments and system used to process food materials on a commercial scale. Building of system for food materials can be efficient if two factors are known, the nature of the food product and what happen to the food during its processing. Food materials are organic in nature and it has a certain kind of qualities which recognize them from other processed food product. Since food materials are organic in nature, they have (a) shapes usually found in normally non regular; (b) properties which differ from other food products; (c) heterogeneous arrangement; (d) properties are varied due to climatic conditions, ripening conditions, etc. and (e) several other factors such as (e) influenced by chemical changes, moisture content variation and enzymatic movement. Managing food materials with these remarkable attributes requires extra thought, for the most part by implication and extra sources or reasons for different varieties. The attributes of a food material that are autonomous of the on looker, quantifiable, can be measured, and characterize the condition of the material (yet not how it accomplished that state) are considered as its physical properties.

Abstract

During present investigation a comparative study was done to see the effect of storage on physical properties of tomatoes (Lycopersicon esculentum Mill) packed in HDPE and stored under ambient temperature. Four varieties of tomatoes taken for current investigation were Badshah, Himshikhar, NS-524 and Raja. From the studies it was clear that TSS increased gradually during storage duration for entire tomato varieties due to loss of some moisture from tomatoes. Variety NS-524 shows maximum shrinkage among all during observation period.

Abstract

In India, the allium groups (onion and garlic) are important bulb crops for home consumption as well as sources of income to many peasant farmers in many parts of the country. The garlic bulbs are valued for their flavor and have wide applications in food and their antimicrobial, antifungal, insecticidal and antioxidative properties. The engineering properties of garlic bulb, clove and skin plays important role in the planning of various post-harvest operations like drying, sorting, grading, bulb breaking, peeling and designing the process equipments like bulb breaker, clove separator and peeler. The aim of this chapter was to study the engineering properties viz., physical, mechanical, aerodynamic and frictional properties of garlic bulbs, and cloves in both peeled and unpeeled form.

Introduction

India is rightly the spice bowl of the world. India has the largest domestic market for spices in the world. Indian spices are the most sought-after globally, given their exquisite aroma, texture and taste. Garlic (Allium sativum L.) is a world’s favourite, versatile horticultural commodity consumed for culinary, medicinal and antimicrobial purposes and is being cultivated for over 5000 years. The most important part of the garlic plant is the compound bulb. Each bulb is made of 6-26 cloves and is wrapped in a white papery sheath. Some varieties have a radish or purplish sheath. The bulbs are valued for their flavour, command extensive commercial importance because of their wide application in food and pharmaceutical preparations. Garlic is still probably nature’s most powerful medicinal plant to us today. It is recognized to have remarkable preventive and curative abilities. Garlic is mainly used aromatic spices and pickles as it has digestive, carminative and anti-rheumatic properties. It is being used in ayurvedic formulation since a long for curing lungs, healing the intestinal ulcer and checking muscular pain and giddiness.

Abstract

Physical properties of food are aspects such as colour, structure, texture, rheology and interfacial properties, and composition. We have a range of instrumental methods for objectively characterising and measuring food structure and physical properties. These are useful for applications such as new product development, benchmarking, reformulation and specification.

Colour

Consistent and accurate measurements of the colour and visual appearance of food products is extremely important. Various methods are available for colour measurement, allowing a wide variety of sample types to be measured. Colour measurement results are typically provided on the CIELAB scale. Others are available on request.

Humankind has always been a perceptive feel for rheological testing, e.g. in physical and visual evaluations of material properties such as hardness, stiffness, flexibility, and viscosity, and their relation to end-use quality characteristics. People often naturally measure the quality of solid foods by gently squeezing them, or liquid viscosity is measured by gently rotating the liquid in its container. These intuitive measurements gradually became formalized into quantitative descriptions of material properties.

Rheology can be defined as the study of how materials deform, flow or fail when force is applied. The name is derivated from Greek word: rheos, meaning the river, flowing, streaming. Therefore rheology means “flow science”. Rheological investigations not only include flow behaviour of liquids, but also deformation behaviour of solids. Normally, to measure rheological properties, the material is subjected to a controlled, précised and quantifiable distortion or strain over a given time and the material parameters such as stiffness, modulus, viscosity, hardness, strength or toughness are determined by considering the subsequent forces or stresses (Dobraszczyk and Morgenstern, 2003). The term rheology was coined by Eugene C. Bingham, a professor at Lafayette College, in 1920, from a suggestion by a colleague, Markus Reiner (Steffe, 1996)

Abstract

Food texture is one of the most widely measured quality attributes during postharvest handling, processing, and consumption. Given the subjectivity in human perception of food texture, texture measurement remains a complex exercise and thus presents both a charm and challenge for researchers and industry practitioners. For fresh foods such as fruit and vegetable, textural properties such as firmness are widely used as indices of readiness to harvest (maturity) to meet requirements for long term handling, storage and acceptability by the consumer. For processed foods, understanding texture properties is important for the control of processing operations suchasheating, frying and drying to attain desired quality attributes of the end product. Texture and viscosity measurement is one of the most common techniques and procedures in food and postharvest research and industrial practice. Foods are complex systems exhibiting various degrees of elasticity, viscosity, and plasticity. Because of its complex structure and mechanical behavior, objective measurements of food texture may be influenced by a variety of test conditions, including rate of loading, the magnitude of deformations imposed upon the material, geometry of the loading surface, and localized yielding within the product tested. Various approaches have been used to evaluate the sensory attributes of texture in foods. However, the high cost and time consumption of organizing panelists and preparing food limit their use, and often, sensory texture evaluation is applied in combination with instrumental measurement.

Abstract

Herbal Burfi was development with various types of milk viz., Buffalo (6% Fat), Cow (4% Fat) and mixed milk (5% Fat) and different levels of sugar i.e. 20, 25, 30 and 35 per cent (weight basis of khoa). Each sample was fortified with 5g satavar and safed musli powder. Other minor ingredients like Almonds, Cardamoms, Cashew nuts, Pistachio nuts, etc were mixed thoroughly and after preparation herbal burfi was allowed to set at room temperature (20- 25_oC) for two hours. Physico-chemical (acidity, pH, fat, protein, lactose, sugar, ash and total solids), microbial (total plate count, coliform count, yeast and mould count) quality and sensory attributes of the herbal burfi were evaluated. The data of experiments were statistically analyzed to compare significance effects of various factors by applying factorial Randomized Block Design (fRBD) with the help of OPSTAT software and ANOVA.

Abstract

Fats and oils are one of the five essential ingredients of human diet and the others are protein, carbohydrates, minerals and vitamins. The oil seeds are major source of edible in world. Oils and fat form an important constituent of human food. Lipid metabolism generates many bioactive lipid molecules, which are fundamental mediators of multiple signaling pathways and they are also indispensable compounds of cell membranes. Many people in developing countries, especially children under five years of age suffer from acute or chronic protein and energy shortages. There is definitely a need for food production to keep pace with the increase in the number of the world’s population. Oilseed and nut should be properly dried before storage, and cleaned to remove sand, dust, leaves and other contaminants. All raw materials should be sorted to remove stones and moudly nuts. Some moulds, especially in the case of groundnuts, can cause aflatoxin poisoning.

Introduction

Oil has been a vital part of people’s regular dietary consumption all over the world and its usage has been found to increase several folds over the decades. The importance of using the appropriate oil for cooking goes a long way in affecting the consumer’s health. Improper methods of oil-aided cooking can lead to cardiovascular diseases and increased cholesterol in the blood (Kumar et al., 2018). There is definitely a need for food production to keep pace with the increase in the number of the world’s population. In order to achieve these national development strategies in many based economy tropical countries on agriculture and biased now towards increasing diversity of food products and consumer in order to alleviate malnutrition and pressure to strengthen and expand based industries on agriculture to ensure that their products are both healthy and safe. Oils and fats for food have used a variety of other applications since prehistoric times, and were easily isolate the source of the fats and oils found useful because of its unique properties.

Abstract

The use of plants for treating diseases is as old as the human species. Popular observations on theuseandefficacyof medicinal plants significantly contribute to the disclosure of their therapeutic properties, so that they are frequently prescribed, even if their chemical constituents are not always completely known. Medicinal plants have therapeutic potential due to the presence of natural antioxidants functioning as reducing agents, free radical scavengers and quenchers of singlet oxygen. Majority of their antioxidant activity is due to bioactive compounds viz. flavones, isoflavones, flavonoids, anthocyanins, coumarins, lignans, catechins and isocatechins. They have been recognized to possess several medicinal properties (diuretic, expectorant, laxative, anti- bacterial, anti-pyretic etc.) and have been effectively used in the indigenous systems of medicine in India and other countries. Apart from the traditional use, a number of beneficial physiological effects have been identified by extensive studies. Among these are their beneficial effects on lipid metabolism, efficiency as antidiabetics, ability to stimulate digestion and to inhibit platelet aggregation, antioxidant, antilithogenic and anti-inflammatory potential.In this chapter an attempt has made to elucidate and understand the chemical and medicinal properties of Stavar and Safed musli those are using as medicine. These may also use as ingredients for preparation of herbal food products.

The word ‘statistics’ has been derived from the Latin Word ‘Status’ which means ‘Political State’. The word statistics has been coined by Gottfried Aschenwall, a German Political Scientist. Ronald Aylmer Fisher is regarded as father of modern statistics. The word statistics has meaning both in plural and singular sense. In plural sense, it means quantitative/qualitative figures. For example, the area under food grains in different states of India, the production of guava in different states of India, germination percentage of seeds, etc.. In singular sense, it means as a subject i.e., method of dealing with the quantitative/qualitative information.

Statistics is defined as scientific method which deals with collection, organization presentation, analysis and interpretation of data. It is included under both science and arts. Statistics is used as a tool to obtain knowledge on other subjects of science.

Frequency distribution table is a statistical table which shows the sets of all distinct values of the variables arranged in order of their magnitude either individually or in groups with their corresponding frequencies side by side.

Need for frequency distribution table

1. To condense the data
2. To provides quick reference for the entire data
3. To facilitate quick & easy statistical analysis of data
4. To reveal the pattern within the data

Presentation of data is done in form of diagram and graphs.

Diagrammatic Presentation: The data are presented in form of diagrams

The important diagrammatic presentations are simple bar diagram, multiple bar diagram, component bar diagram, percentage bar diagram & pie diagram.

Selection of diagram depends upon the nature of classification, number of characters involved and the type of comparison required to be made. In all the diagrams, the groups or classes are represented on the X-axis and the volumes or frequencies are represented in the Y-axis. The title of these visual aids should be self-explanatory.

1. Simple Bar Diagram: Simple bar diagrams consist of vertical bars of equal width. The height of these bars is proportional to the magnitude of the attribute. All bars are separated from each other by equal intervals. Simple bar diagram is used if the classification is based on attributes and if the attributes are to be compared with respect to a single character. For example, the area under different crops in a state, the production of mangoes in different years for a state, the yield of a variety at different fertilizer level, etc, can be represented by the simple bar diagram. Also the yield performance of different varieties of a crop, the effects of different treatments etc, can be compared using simple bar diagrams.

Measures of central tendency are also known as averages. Averages are defined as statistical constants which enable us to understand in a single effort, the significance of the whole i.e., they are the representative value of the distribution. They give an idea about the concentration of the values in the central part of the distribution.

Five Types of Averages

Arithmetic Mean

It is the sum of all the observations divided by the number of observation.

For individual data or simple series (i.e., series in which all values have single frequency)

Literal meaning of dispersion is scatterdness. We study dispersion to have an idea about the homogeneity and heterogeneity of the distribution. Dispersion gives an idea about how much the values of the observation varies from their averages. The series in which the values of the observation differ much from their averages is said to be heterogeneous or highly dispersed. The series in which the value of the observation does not differ much from their averages is said to be homogenous or less dispersed.

There are two types of measures of dispersion:

In some experiments the result can be predicted with certainty. For example, the bulb will stop glowing when switched off, the evolution of hydrogen gas when zinc reacts with dilute hydrochloric acid. Such phenomenon where the result can be predicted with certainty is known as deterministic phenomenon. But in some experiments the result cannot be predicted with certainty. For example, Sales of a firm, profit made by a company, yield of a crop, etc. Such phenomenon where the result cannot be predicted with certainty are known as probabilistic or random phenomenon. Such phenomena are frequently observed in economics, business, agriculture, social science, biology, etc., and in our day to day life.

The theory of probability is a very important branch of statistics which provides a numerical measure of uncertainty.

Random variable: A random variable is a variable that assumes numerical values associated with the events of a random experiment whose outcomes cannot be predicted with certainty. For example, Height of rice plants in a field; seed weight; No. of tillers per rice plant.

A random variable is of two types:-

1. Discrete random variable: The random variable which takes only countable values i.e., integral values. For Example, Number of tillers per rice plant. Here there can be finite no. of values between any two values.
2. Continuous random variables: The random variable which takes values within intervals. These values cannot be counted but can only be measured. Here there can be infinite no. of values between any two values for example, Height of rice plants in field; seed weight.

Concept of correlation was given by Karl Pearson in 1890.

The study of strength and nature of relationship between two variables is called correlation. Two variables are said to be correlated, if the change in one variable affects the other variable. Correlation is also known as covariation.

Bivariate Distribution: Distribution involving two variables is known as bivariate distribution. For example, Height and weight of persons, yield and production of a crop in.

On basis of type of association between variables, correlation is of two types:

The aggregate of data forming a subject of investigation is known as population. Example, All the crop plants grown in a plot; all the fruit plants in an orchard, etc. The population may be:

1. Finite: No. of observations are definite. e.g., number of farms in a village, no. of house in a locality, no. of trees in an orchard are all finite population.
2. Infinite: Number of observation are indefinite e.g., (a) Number of insects in a region, number of grasses in a field etc. are all infinite population.

The Population may be:

1. hypothetical or theoretical

   Hypothetical population consists of unit that has no physical existence. This population exists only in imagination. For example, Result of tossing coin, throwing die,

2. Existent or real population consists of units that are physically present. This population actually exists. For example, Number of employees in a factory, Number of farms in a village.

A sample is said to be small sample if the sample size(n) is less than 30. Various small sample tests are: (i) t-test (ii) F-test

t-test performs the following tests for small sample(s).

1. To test the equality between a single sample mean and the assumed population mean.
2. To test the equality of two independent sample means.
3. To test the equality of two paired sample means.
4. To test the equality between sample correlation coefficient and the assumed population correlation coefficient

Samples having size, n - 30 are known as large sample. For large values of n (i.e., for n - 30), almost all the distributions are very closely approximated by normal distribution. Thus in this case we apply the normal test, which is based upon the area property of the normal probability curve. Large Sample Test is also known as Z-test or SND (Standard Normal Deviate) test.

Chi-square test is a non-parametric test as the null hypothesis does not contain any assumption regarding the population parameter. Chi-square is also written as c₂. In this chapter two uses of chi-square test will be dealt with. They are the following :

An experiment is a systematic process or activity which leads to collection of information on certain objects to give an answer to the objectives of the researcher.

The experiment in which certain absolute values like average, correlation coefficient, median, mode, etc are worked out to describe the population is known as absolute experiment.

The experiment in which the effects of different objects under consideration are compared is known as comparative experiment.

The variable whose change we wish to study is called as Response variable. For example- yield, mortality rate of insects etc.

The variable whose effect on the response variable we wish to study is termed as Factor. For example - variety, fertilizer, insecticide etc.

Here factor is the independent variable and response variable is the dependent variable.

The various levels of a factor whose effect on the response variable we wish to study are known as Treatment.

Agriculture

The term agriculture is derived from Latin word ager or agri meaning soil and cultura meaning cultivation. Agriculture is a broad term encompassing all aspects of crop production, livestock farming, fisheries, forestry etc. Agriculture is a branch of applied science and is the art of farming including the of cultivating the soil for producing crops and raising livestock. There are three main spheres of agriculture-geoponic meaning cultivation in soil, hydroponic meaning cultivation in water and aeroponic meaning cultivation in air.

Agriculture is a productive unit where the gifts of nature like land, light, water and temperature are integrated into a single primary unit that is crop plant which is indispensable for human beings. The secondary productive units of agriculture are animals including livestock, birds and insects which feed on the primary units and provide concentrated products such as meat, milk, wool, eggs, honey, silk and lac.

Agronomy is a branch of applied science deals with the principles and practices of field crops production and management of soil for higher productivity. The term Agronomy is derived from Greek word agros meaning field and nomos meaning to manage.

Norman (1980) defined Agronomy as the science of manipulating the crop environmental complex with dual aims of improving Agricultural productivity and gaining a degree of understanding of the process involved.

In recent times, Agronomy has assumed newer dimensions and can be defined as ‘A branch of Agricultural science that deals with the methods which provide favourable environment to the crops for higher productivity’.

It is supposed that man was evolved on earth about 15 lakh years ago. This man started to move by standing erect on his feet and called Homo erectus L. Later the modern man was evolved called Homo sapiens L. (Sapiens means learning habit) due to his continuous learning habit. It is difficult to trace the exact period of beginning of agriculture. Archeological evidences indicated that, Agriculture started about 50,000 years ago.

Hunting was the primary source of food in olden days and was prevailed for long time. They obtained his food through domestication of some animals like dogs, horse, cow, buffalo etc. They live in the periphery of the forest and migrate from one place to another in search of food. It was not comfortable and they started enjoying by settling at one place near the river and started agricultural system.

Higher plants demand certain basic things for their growth. As many as 52 factors (basic things) influencing crop growth have been identified :

• 100 per cent of the land has sufficient CO₂ in the atmosphere and sunlight
• 83 per cent have favourable temperature
• 64 per cent have favourable topography
• 46 per cent have reliable rainfall
• 40 per cent have satisfactory fertile land

Agriculture plays a key role in the overall economic and social well being of the country. Though the share of Agriculture in both GDP and employment has declined overtime, Agriculture still forms the backbone and occupies a pride of place :

1. Agriculture contributes 24 per cent to the Gross Domestic Product. GDP was declined from 39 per cent in 1983 to 25 per cent during 1999-2000 and now it 17.32 per cent.
2. Provides livelihood support for more than half of the population in the country. The sector provides employment to 56.7 per cent of the India’s work force.
3. Agriculture has been the source of raw material for industries. Majority of the industries depending on agriculture for their raw materials. Ex: Textile (Cotton, Jute), Sugar (Sugarcane, Sugar beet), Small & medium scale industries like soaps, dyes, medicines, vitamins, preservation of fruits and vegetables, dhal milling, rice husking, Jaggery making, oil crushing, handlooms etc.
4. It provides large part of market for industrial goods viz., seeds, fertilizers, pesticides, implements, machines like pump sets, trucks, tractors, power tillers, sprayers etc.
5. Support roadways, railways, airways and shipways for transport of inputs & produce.

Crops: Is a cultivated plant that is grown on large scale commercially, especially cereal, pulses, fruits or vegetables.

Classification of crops : Several crop plants are alike with respect to ontogeny (Development), morphology, anatomy, physiology and requirement of environment. Classification is done to generalize similar crop plants as a class for attaining better understanding of them. Field crops are classified in several ways.

Seed is the living link between plant and progeny and biologically seed is ripe fertilized ovule and a unit of reproduction of flowering plant. Agronomically, a seed material or propagule is the living organ of crop in rudimentary form used for propogation.

Propagation Asexual Sexual Seed Stem cutting Ex: Sugarcane Grafting Rooted slips Ex: Grasses Tubers Ex: Potato Budding Corms Rhizomes Layering

Plants perpetuate / multiply either sexually or asexually. Sexual methods are through seeds and asexually through vegetative parts. Most of the crop plants produce viable seeds which are used for sowing. Those used for multiplication are called seeds and those which used for human consumption are called grains.

Seed consisting of intact embryo, stored food and seed coat which is viable and has got a capacity to germinate. Embryo has two parts: