eChapters

1. GENERAL POMOLOGY

Word pomology: Derived from Greek word ‘pome’ meaning development of fruit from inferior ovary and ‘logos’ meaning to study.

Father of systematic pomology: De Candolle.

Temperate fruits are popularly known in India as hill fruits or cold region fruits.

India ranks 1^st in productivity of grapes, banana and papaya.

Ratio of Chlorophyll a to chlorophyll b is highest in C⁴ plants.

Gibberellic acid is enhanced by exposing plants to red light.

The life line tree of ‘Thar Desert’ is Prosopis cineraria.

Grape of the desert is Salvadora oleoides.

GENERAL POMOLOGY

Word pomology: Derived from Greek word ëpomeí means ëdevelopment of fruit from inferior ovaryí and ëlogosí means ëto studyí.

Father of systematic pomology: De Candolle.

T. A. Knight attempted 1st artificial hybridization in fruit crops

Important Points to Remember

Apple

• Botanical name: Malus x domestica Borkh.
• Family: Rosaceae
• 2n: 34
• Origin: Asia Minor to Western Himalayas

I. FILL UPS

1. The botanical name of mango is _____.
2. The family name of mango is _____.
3. The botanical name of banana is _____.
4. The family name of banana is _____.

1. TROPICAL FRUITS

1.1. Common name, botanical name and family

Most varieties of fruit plants have originated as chance seedlings or through somatic mutation and have been maintained and multiplied through vegetative propagation by fruit growers. The improvement of fruit plants through breeding has not yet attracted the serious attention of the research workers. Unlike field crops, fruit plant breeding is time consuming and laborious. Studies on the mode of inheritance of important economic characters of fruit plants are difficult because of the heterozygous nature of the plants. Moreover, varying degrees of sexual incompatibility have complicated the situation. Due to a long juvenile phase, it takes a long time to identify a useful hybrid. This factor has become a serious handicap because most research workers leave or shift from the programme before tangible results are obtained.

During the last two decades, considerable useful information has been generated on breeding methodology for the improvement of some of the important fruit crops. In this chapter fruits like mango, banana and papaya have been included.

8.1 Introduction

Fruitfulness refers to the state where a plant is not only capable of flowering and bearing fruit but also takes these fruits to maturity. The inability to do so is known as ‘unfruitfulness’ or ‘barrenness’. Unfruitfulness is a major problem in many fruit crops and their varieties. It results in huge loss to growers and makes fruit cultivation less profitable.

8.2 Factors Affecting Unfruitfulness

Unfruitfulness can be due to lack of balance between vegetative growth and fruiting, lack of flowering and poor fruit set, which is result of the unfavourable environment. It can also be due to heavy cropping, leading to inhibition of fruit bud production and poor crop in the following year. Sterility also leads to unfruitfulness due to impotence, incompatibility or the abortion of embryo. This unfruitfulness is one of the serious problems of many orchards and its causes need to be understood properly for effective control and obtaining economically acceptable production level. The causes of unfruitfulness can be broadly grouped into two categories: internal factors and external factors.

I. FILL UPS

1. Mango fruit is a _____.
2. _____ is a fleshy fruit with a single seed enclosed by a hard, stony endocarp or pit.
3. Apple fruit is a _____.
4. _____ fruit is a drupe.
5. Grape fruit is a _____.
6. Cucumber fruit is a _____.
7. Citrus fruit is a _____.

Importance of Fruits and Vegetables in Human Life

Fruit is the edible, and more or less juicy, product of a tree or plant and consist of the matured ovary including its seeds and adjacent parts. Usually fruits are sweet, with a wide range of flavours, colours and textures.

Composition

Fruits are very poor source of protein and fat. Avocado is the exception containing 28% fat. Fruits contain high amount of moisture hence they are highly perishable. They are also good source of fiber. Fruits are not very good sources of calories. Fruits like bananas give fairly good amount of calories. Ripe fruit contains a higher percentage of sugar than unripe fruit does and the sugar is chief in the form of sucrose, fructose and glucose. Generally fruits are poor source of iron, Mangoes are excellent source of carotenes. Oranges are fairly good source of beta carotene. Guavas are the best source of vitamin C. Citrus fruits are good source of vitamin C. Cashew fruits are inexpensive and rich in vitamin C, although there is variation of vitamin content from fruit to fruit most fruits in the raw state contain some ascorbic acid. If fruits are bruised, peeled, cooked or exposed to air, large amounts of the vitamin may be oxidized. Apples are not only expensive; they contribute little to the nutritive value. They give fiber to the diet.

1. INTRODUCTION

The Green Revolution and subsequent efforts through the application of science and technology for increasing food production in India, have brought self-reliance in food. The imputs given by the Government, State Agricultural Universities, State Departments of Agriculture and other organizations through the evolution and introduction of numerous hybrid varieties of fruits and vegetables and improved management practices have resulted in increased food production. However, the nation still faces the problem of the use of improper methods for the storage of food stuffs and their preservation leading to great wastage of the food produced. So, there is a urgent need for the application of food preservation and processing methods.

Food preservation involves all the processes used to maintain foods with the desired properties or nature for longer time. The process is has moved from an art to a highly interdisciplinary science. Food safety now the first priority of the food production and preservation industry, incorporating innovations and sustainability. The preservation and processing of food however, is not as simple or straight forward as it was in the past. A number of new preservation techniques have been developed to satisfy the current demands of economic preservation and consumer satisfaction in nutritional and sensory aspects, convenience, and safety, absence of chemical preservatives, and environmental safety. Understanding the effects of each preservation method on food has therefore, become critical in all the aspects.

    1.    Vegetables are less acidic than fruits and food poisoning bacteria are able to grow in many vegetable products

    2.    Different levels of acidity in fruits

    3.    Water for cleaning of fruits and vegetables should contain about 200 ppm of chlorine (by mixing 1 litre of bleach into 250 litres of water)

    4.    Water that is used as an ingredient in fruits and vegetable product should not contain more than 0.5 ppm chlorine (by adding 2.5 ml of bleach to 250 litres of water), to avoid contaminating products with a chlorine smell

    1.    Asepsis is a process of 
        a)    Removal of microorganisms    
        b)    Keeping out microorganisms
        c)    Hindering the growth & activity of microorganisms    
        d)    Killing the microorganisms
    2.    Self-decomposition of the food is prevented by
        a)    Inactivation of enzymes    b)    Delay of chemical reactions
        c)    a & b    d)    None
    3.    Commercially available fruit beverages are generally pasteurized at 
        a)    85°C for 25 to  30 min    b)    62.5°C for 25 to  30 min
        c)    71.1°C for 15 to  30 sec    d)    92.1°C for 15 to  30 min

Horticulture is increasingly recognized as a sunrise sector, owing to its potential to raise farm income, provide livelihood security and earn foreign exchange through export. The diverse agro-climatic conditions and rich diversity in crops and genetic resources enable India to produce a wide range of horticultural crops round the year. To cite an example, India produces tropical fruit like mango and sub-tropical fruit like an apple at the same season in a year (Jha et al., 2019). The horticulture sector encompasses a wide range of crops like fruits, vegetables, flowers, spices, plantation crops like coconut, beverages like tea and coffee, and some medicinal and aromatic plants. Statistics provided by National Horticulture Development Board showed that India is the second largest producer of the commodities, after China, accounting for 13 per cent of the global production of fruits and 21 per cent of vegetables. (DAC&FW, 2017).

Economic reforms and policies further increased the speed of diversification in favor of horticulture crops (Jha et al., 2019). This is on account of the increased domestic demand from high-value food commodities as well as for export markets. The diversification process that is seen within the agricultural sector also got transmitted to the horticultural sector. In line with the emerging demands, India has taken several technical and policy initiatives for promoting horticulture. The most important among is the newer technology packages spanning from production to postharvest (Jha et al., 2019).

Temperate horticulture in Himalayan States forms the backbone of states economy by providing livelihood to more than 10 million people and draws about 60% of its Gross Domestic product (GDP) from the surrounding ecological resources. Being an important sector it has been given priority in recent years through various developmental programmes to harness the vast potential of natural resources, the topography, soil, climate and horticulture crop diversity. The outburst in climate and over population have become a major concern challenging natural resources of the Himalayan region for sustainable development of agriculture and improving livelihood of the local inhabitants. Depleting natural resources and vagaries of weather are negatively affecting long-term sustainability of Himalayan agri-horti production system. In spite of several chal-lenges the horticulture in temperate region has made some progress. The area, production productivity, availability and export of horticulture products have increased manifolds leading to improvement in employment and farm income. But still the temperate fruit industry is far behind and is facing the problem of low productivity and high cost production due to lack of elite planting material, old and senile orchards, rainfed farming, lack of efficient water, nutrient and canopy management, high infestation of insect and pests, poor transport and communication coupled with weak post harvest infrastructure. The modern new high yielding varieties and technological interventions developed especially the high density plantations; canopy & pollination management; fertigation, INM and water harvesting; cost effective and eco-friendly protection technologies and post harvest management and value addition have shown great potential to revolutionize the horticulture sector to bring paradigm shift from existing low quality lower productivity sector to high quality-higher productivity sector. The farmers have an opportunity and can take the advantage of emerging technologies in temperate horticulture to improve their nutritional and livelihood security.

SYNOPSIS

Many plants or plant parts are eaten as food. In addition to essential vitamins, minerals, and fibers, plant foods contain phytochemicals and antioxidants, which actively provide protection against diseases. Several studies carried out all over the world have demonstrated the protective values of fruits. Fruits are the ripened ovaries of plants, including the seeds within. Many plants have evolved fruits that are attractive as a food source to animals, so that animals will eat the fruits and excrete the seeds some distance away.

These include mainly tomato pomace, jack fruit waste, pineapple waste, apple pomace and citrus fruit processing waste.
1. Tomato pomace (Lycopersicon esculentum): Tomato pomace consists of the remnants of tomato processing, including peels, crushed seeds, and minimal pulp, which are left after extracting juice, paste, or ketchup. Following juice extraction, the pomace is typically dried and ground. Due to its high moisture content, artificial drying methods can be costly, making sun drying a more favorable option. The pomace should be dried until it reaches a crisp texture. After drying, it is essential to grind the pomace and incorporate the resulting product thoroughly into the diet. The composition of tomato pomace includes 93.5% DM, 17-22% CP, 39% CF, 11.1% EE, 0.44% Ca and 0.36% P, with 55% TDN. In terms of dietary inclusion, tomato pomace can be incorporated into the rations of adult bullocks and milch cows at levels of up to 50% and 16%, respectively, without negative effects. In dairy cows, the intake of dry matter, milk yield and milk composition remained unaffected. Additionally, fresh tomato pomace can serve as a supplementary feed for growing and finishing pigs. Notably, feeding growing pigs a diet containing 6% fresh tomato pomace resulted in a significant increase in feed consumption compared to those receiving a standard commercial mash.
2. Citrus by-products: Citrus fruits encompass several significant varieties, with the most notable being the orange (Citrus sinensis), lemon (Citrus limon) and grapefruit (Citrus paradisi). The by-products derived from citrus processing are affected by various factors, including the fruit’s origin and the method of processing employed. Consequently, the nutritional value of these by-products varies based on the type of waste and the specific fruit involved. The citrus by-products contain 1.7-7% TA, 1.2-2.1% EE, 5.7-8.6% CF, 2.2-4.2% CP, 65-75% NFE,
10.2-16.5% total sugar, 1.3-6.5% lignin and 4.4-12.8% pectin. Fresh citrus pulp waste is considered palatable for cattle, with a consumption capacity of up to 10 kg per day. Dried citrus pulp can be incorporated into animal feed at levels as high as 45% of the total ration. However, it is important to note that the digestibility of this feed in sheep diminishes when the inclusion exceeds 30%.

1.    Almost all liquid foods are concentrated before drying due to

(a) Technical advantages

(b) Preservation

(c) Nutritional advantages

(d) Both (a) and (c)

2.    Which of the following compound mainly possesses anti-microbial property in garlic and onion?

(a) Acrolein

(b) Eugenol

(c) Allyl isothiocynate

(d) Terpenoid

3.    Which of the following fruit juices concentrates are prone towards spoilage?

(a) Acid

(b) Non-acid

(c) Both (a) and (b)

(d) None of these

Method: To check the performance of these pans, prepare 3 besan chillas on each type of pan by using equal quantity of oil and batter. Then compare and evaluate prepared dishes on 5 parameters i.e. Appearance, Texture, Aroma, Color and Taste by using 9-point hedonic scale.

Introduction

The landscape of the Indian food industry has undergone a dramatic transformation in recent years. Rising disposable incomes, coupled with the rapid pace of urbanization, have fuelled a surge in demand for convenient and processed food options. Consumers, increasingly pressed for time, are turning towards ready-to-eat meals, packaged snacks, and a wider variety of processed food products. While this trend signifies a growing economy and changing lifestyles, it has also brought to light a critical concern: ensuring food safety and empowering consumers with clear and accessible information. In order to empower consumers to make educated food choices and build trust between brands and consumers, food label transparency is crucial. Transparent labelling is essential for improving public health because it gives precise and unambiguous information about ingredients, nutritional value, and possible allergies. This information helps prevent diseases linked to a certain lifestyle, such diabetes, heart disease, and obesity. Additionally, it guarantees that customers are not misled about the quality or provenance of their food, shielding them from dishonest business tactics. Transparency also promotes market justice by levelling the playing field, making product integrity apparent, and fostering creativity and brand loyalty. Transparent labelling promotes ethical and sustainable consumption while also facilitating international trade by adhering to regulatory norms in many countries.

Recognizing this need for a more transparent and consumer-centric food ecosystem, the Food Safety and Standards Authority of India (FSSAI) introduced the FSS Labelling and Display (L & D) Regulations in 2020 under the Food Safety and Standards Act, 2006 (FSS Act). This landmark legislation marked a significant shift in the way food is labelled and marketed in India. By establishing stricter regulations and mandating the inclusion of comprehensive information on food packaging, the FSSAI aimed to empower consumers to make informed choices while also promoting fair competition within the food industry. This comprehensive review delves into the intricacies of the FSS Labelling and Display Regulations 2020. It explores the key provisions of the regulations, analyzes their impact on various stakeholders, and examines the challenges and opportunities associated with their implementation. By providing an in-depth analysis, this chapter aims to shed light on the significance of these regulations in shaping a more responsible and transparent food industry landscape in India.

Safe Food means

• It is not injurious to health
• It does not contain any filthy, rotten, decomposed or diseased animal
• substance or vegetable substance
• It is produced undermost hygienic conditions to produce/manufacture it, inferior or cheaper ingredients/raw materials are not used
• Food additives/processing aids used are permitted and are within prescribed limits.
• It is not misbranded

ABSTRACT

This paper demonstrates the ability of FTIR for analyzing compositional structures of naturally occurring crystals namely gypsum and calcite. As these two crystals occur in a wide variety of geological environments and are susceptible to compositional and structural changes influenced by pressure, temperature, crystallization fluids and so many other factors, these are extensively studied by geoscientists for interpretation of paleoenvironment, modeling diagenesis of sediments and deducing sediment maturity for hydrocarbon exploration, study of these two crystals is important. Naturally occurring gypsum and calcite crystals collected from Cretaceous marine deposits of Ariyalur area were chosen for the present study as extensive occurrences of hydrocarbons are reported from offshore region of Cauvery basin and exploratory works are going on in the onland region. It is observed that the vibrational spectra of studied crystals show specific patterns in terms of stretching patterns of O-H, C-O, C=O, SO₄ and CO₂. As FTIR offers fast, cost-effective, non-destructive method of analyses of natural compounds, as it is proven useful, it can be utilized extensively in academic research and commercial exploration activities by geoscientists.

Keywords : Spectral characterization, calcite, gypsum, diagenesis, paleoclimate, hydrocarbon exploration.

16.1 Fuel Cell

Fuel cell is an electrochemical device that convert chemical energy of a reaction directly into electrical energy. The basic physical structure of a fuel cell consists of an electrolyte layer in contact with a porous anode and cathode on either side. A schematic representation of a fuel cell with the reactant or product gases and the ion conduction flow directions through the cell is shown in Fig. 16.1

15.1 Fuel Cell

Fuel cell is a electrochemical device that convert chemical energy of a reaction directly into electrical energy. The basic physical structure of a fuel cell consists of an electrolyte layer in contact with a porous anode and cathode on either side. A schematic representation of a fuel cell with the reactant or product gases and the ion conduction flow directions through the cell is shown in Fig. 15.1

9.1 Introduction

Hydrogen is colourless and odourless gas. Hydrogen is simplest and lightest element and most abundant available element on the earth. It is not primary energy source as it does not exist in free state however it presents in compound with oxygen (water) and carbon, nitrogen and oxygen in living material and fossil fuels (natural gas, coal and biomass). Therefore, hydrogen can be produced from these sources using some external energy. Hydrogen can be burned without generating CO₂ and have clean combustion. but with air it can form very explosive mixture. Hydrogen is considered as an energy carrier. Like energy carrier allows the transport of energy in usable form from one place to another. 

INTRODUCTION
The fuel system in a tractor engine is essential for maintaining efficient engine operation by ensuring clean and well-regulated fuel is delivered to the combustion chamber for optimal performance. Proper upkeep of this system, including regular checks on fuel filters, lines, and pumps, helps extend the engine’s lifespan and guarantees smooth operation during demanding agricultural tasks. The fuel system plays a key role in supplying the engine with precisely regulated fuel for combustion. Core components like the fuel pump, fuel filter, and fuel injectors work together to deliver the right quantity of fuel at the appropriate time, ensuring the engine operates efficiently, performs reliably, and lasts longer.
FUEL PUMP
The fuel pump is responsible for drawing fuel from the fuel tank and delivering it to the engine at the correct pressure. It ensures a consistent and reliable flow of fuel to the fuel injectors or carburetor.
Types of Fuel Pumps
• Mechanical Fuel Pump: Common in older tractors, this pump is usually driven by the engine through a gear or camshaft. It delivers fuel from the tank to the fuel system at a steady pressure.
• Electric Fuel Pump: Found in modern tractors, electric pumps are powered by the tractor’s electrical system and provide more consistent pressure and flow. These are often located near the fuel tank and can be activated by a relay or switch.

INTRODUCTION
The fuel system in a tractor engine is essential for providing the engine with the right amount of fuel to enable efficient combustion. Its primary function is to guarantee a steady and reliable flow of clean, properly atomized fuel, which is crucial for achieving optimal performance and fuel efficiency. The system consists of various components that collaborate to manage different processes such as storing, filtering, and delivering the fuel to the combustion chamber.
These processes must work in harmony to ensure the engine operates smoothly, maintaining both power output and efficiency. Proper atomization of the fuel ensures that it mixes well with air, allowing for more complete combustion and minimizing the chances of fuel wastage or emission of harmful substances. From fuel storage tanks to injectors, every part of the fuel system is designed to meet the demands of the engine under various operating conditions.
A well-functioning fuel system helps maintain engine longevity, reduces fuel consumption, and ensures that the engine can perform at its best across different workloads and environments.
Fuel is a substance consumed by the engine to produce power. The common fuel for Internal Combustion engines are
1. Petrol
2. Power kerosene
3. High speed diesel
Calorific value of fuel
The heat liberated by combustion of a fuel is known as calorific value or heat value of the fuel. It is expressed in kcal/kg of the fuel

A fullerene is any molecule composed entirely of carbon, in the form of a hollow sphere, ellipsoid, or tube. Spherical fullerenes are also called buckyballs, and cylindrical ones are called carbon nanotubes or buckytubes. Fullerenes are similar in structure to graphite, which is composed of stacked graphene sheets of linked hexagonal rings; but they may also contain pentagonal (or sometimes heptagonal) rings.

The first fullerene to be discovered, and the family’s namesake, was buckminsterfullerene C₆₀, made in 1985 by Robert Curl, Harold Kroto and Richard Smalley. The name was homage to Richard Buckminster Fuller, whose geodesic domesit resembles. Fullereneshave since been found to occur (if rarely) in nature.

The discovery of fullerenes greatly expandedthe numberof known carbon allotropes, which until recently were limited to graphite, diamond, and amorphous carbon such as soot and charcoal. Buckyballs and buckytubes have been the subject of intense research, both for their unique chemistry and for their technological applications, especially in materials science, electronics, and nanotechnology.

Introduction

The increase in agricultural production, particularly food grain is one of the major problems of national planners to achieve the target in the food production. Our farmers have been utilized more and more the modern methods of agriculture including the use of chemicals for protection of crop and stored products against the pests. A successful farmer knows that what pests to expect on his crops and stored products, when and under what conditions their attack will be possible. But due to insufficient knowledge of chemicals and their application, our farmers use them without care and injudicious manner, therefore, these chemicals not only give poor kill of insects but also cause the hazards to man and domestic animals. Success in pest control operations depends on many factors such as correct identification of pest, proper timing of insecticidal application, right choice of chemicals and their formulations, doses and method of application.

Fumigants are still widely used for the control of insects and other pest organisms. Because of their unique characteristics and the great adaptability of fumigation technique, fumigants can often provide effective and economical control where other forms of pest control are not feasible. The development of light weight plastic sheets to enclose spaces or materials requiring fumigation has extended its use and made control procedures easier and much more adaptable. Among the fumigants, aluminum phosphide, ethylene dibromide (EDB), Ethylene dibromide- carbon tetrachloride (EDCT) etc. are most common in tropical and sub-tropical while methyl bromide is prevalent in temperate regions. Modern technology and research have also brought to notice certain problems with fumigants that are previously unknown. Among these, adverse effects on seed quality are most important. Thus, fumigants used in seed stores should not affect the viability of the seeds, should not be persistent, non-corrosive and highly diffusible.

Gaseous poisons use to kill insects are called as fumigants. Fumigants are pesticides that form poisonous gases when applied. Some active ingredients are liquids when packaged under high pressure but change to gases when they are released. Other active ingredients are volatile liquids when enclosed in an ordinary container and so are not formulated under pressure. Still others are solids that release gases when applied under conditions of high humidity or in the presence of water vapor.

4.1 Introduction to Function in Python

Python Functions is a block of related statements designed to perform a computational, logical, or evaluative task. The idea is to put some commonly or repeatedly done tasks together and make a function so that instead of writing the same code again and again for different inputs, we can do the function calls to reuse code contained in it over and over again. Functions can be both built-in or user-defined.

Function means sub-program

1. Function definition

2. Function call

Example:

def message: #function definition

print(?hello python”)

message() #function call

Anatomically the male reproduction system comprises of testes, scrotum, duct system, accessory sex glands, prepuce, and penis. Production of spermatozoa and male sex hormone are the main functions of male reproductive physiology. The Male reproductive system can be categorized as: • Primary sex organ – Testicles • Secondary sex organ – Epididymis, vas deference, urethra, and penis. • Accessory sex glands – Seminal vesicles, prostate, and bulbourethral glands/cowper’s gland. 1. Testes (Paired male gonads) (Singular: Testis or Testicle) • Testes are the primary sex organs. They are situated in the scrotum at the inguinal region with the help of tunics and spermatic cord. Opening of the scrotal pouch into the abdominal cavity is called as inguinal canal. The testis is covered with an extra abdominal tunic named as tunica vaginalis, tunica albuginea, and tunica vasculosa from outside to inward. The fluid filled in between the parietal and visceral layers of tunica vaginalis is responsible for the movement of the testis within the scrotum. The upper end of a testicle is occupied by the caput epididymis and the lower end is connected to the cauda epididymis.

Trees alone on the earth give happiness both here and hereafter. Since they “save” from abject poverty they are named “taravah” (the saviors). Therefore, the trees should be carefully nurtured as through their shade, flowers and fruits they help immensely in the pursuit of dharma, artha, and kama (Vrikshayurveda).

Recyclable Packaging Definition: Designed to be collected, processed, and used again in manufacturing, thus reducing reliance on new, raw materials. Materials: Includes materials like paper, glass, aluminum, and some plastics (e.g., PET, HDPE, PP). Challenges: Issues include contamination, difficulty recycling complex multi layered packaging, and regional recycling system variations. Applications: Commonly used for beverage bottles, food containers, cardboard boxes, and various consumer products ( Lin et al .,2022). Reusable Packaging Definition: Packaging that can be repurposed multiple times for its original function or for alternative uses. Materials: Often made from durable materials such as glass, metal, or sturdy plastics for repeated use without losing quality. Examples: Includes glass jars, metal tins, and crates for fresh produce transport. Challenges: Requires efficient collection and cleaning systems and may be unsuitable for single-use or sensitive items like fresh meat. Applications: Frequently found in beverage containers, food storage, and bulk food packaging

Abstract

A functional food is defined as food that provides health benefit beyond the basic nutrition. Such foods reduce risk of high blood pressure, coronary heart disease, osteoporosis, cancer and dental caries. Consumers’ increasing interest for maintaining or improving their health by eating specific food items has led to the development of many new functional foods including dairy products. These functional dairy foods contain some functional ingredients that decrease the absorption of cholesterol, reduce blood pressure and play role in regulation of satiety and have antimicrobial effects. Milk is a good source of fat, protein and minerals. It also contains several intrinsic functional components like melatonin, conjugated linoleic acid etc. in amounts lower than the body requirements. Fermented dairy products contain probiotics with special health benefits. Functional dairy foods could be produced with the addition and/or generation of functional components. Some examples include milk, yogurts and cheese enriched with conjugated linoleic acid or plant stanols/sterols to help reduce the risk of heart disease. Fermented dairy foods possess various nutritional and therapeutic properties. Lactic acid bacteria (LAB) play a major role in determining the positive health effects of fermented milks and related products. Dairy products with probiotics and prebiotics enhance digestive health, prevent colon cancer, help in lowering blood pressure and improve immune functions. Melatonin is important in curing of sleep disturbance and enhancement of alertness. Milk derived peptides have immunological, antimicrobial, ACE-inhibitory activity/antihypertensive, anti-carcinogenic and antioxidant activity. The aspects of functional dairy foods will be presented in detail.

Introduction

In terms of individual health and physical condition, the situation in modern society is rather giving rise to concern. The last decades have seen a tremendous increase in availability and variety of food products which has undoubtedly affected the food habits of the average individual. Despite the fact that food has become overall safer and increased accessibility allows for healthier diets, worrying we are nevertheless faced nowadays with diet- related diseases of proper epidemic proportions. We now encounter an epidemic of obesity that spreads not only to the majority of the adult population but also, more worryingly, to young people who have rarely the option of alternative diets. Moreover, as scientific proofs for the link between diet and disease (particularly cardiovascular diseases and some cancers) accumulate, action is urgently needed. There are an increasing number of calls for action. It is within this situation that functional foods have developed. They assume a highly targeted solution to the diet related diseases with effective reduction of risk and improved physical and mental well being. That represents a big step from the traditional food-for-nutrition but the scientific milieu is ready to take the chances. The emerging ‘functional food science’ is focusing research on the effects of functional foods on growth, development, metabolism, the cardiovascular system, intestinal physiology, and even on behavioural and psychological functions (FAIR, 2000, Vol. 1). In view of these facts, it should appear necessary to assess and evaluate the developments in food production in terms of their effect on the individual consumer and the society at large.

1. Introduction
Functional feed additives are specialized, non-nutritive substances added to animal feed with the primary aim of enhancing health, growth, and performance beyond the basic nutritional requirements. Unlike traditional feed ingredients that primarily provide essential nutrients, functional additives are intended to optimize physiological functions and overall well-being in animals. In the context of aquaculture, these additives are particularly crucial for improving the efficacy of fish diets, as they can significantly influence various health and performance parameters.
Functional feed additives can be derived from a diverse array of sources, including:
• Microorganisms: Probiotics and prebiotics that support gut health and improve digestion.
• Plants: Phytochemicals, such as flavonoids and alkaloids, which have antioxidant, anti-inflammatory, and immunostimulatory properties.
• Natural Compounds: Various extracts and essential oils known for their therapeutic effects on fish health.
By integrating these additives into aquafeeds, aquaculture practitioners aim to promote fish welfare, enhance production efficiency, and ultimately contribute to sustainable fish farming practices.

Introduction

Nutrients are essential substances present in different types of foods which perform various life-sustaining functions in the body. They are required for growth, maintenance and the reproductive process. Poultry require more than 40 such nutrients, which are classified into six major groups - water, carbohydrates, protein (amino acids), fats, minerals and vitamins. Poultry diets must be formulated to provide all these essential nutrients as per the bird’s requirement to achieve optimum growth and production. Several ingredients including cereal grains, cereal by-products, fats, plant protein sources, animal by-products, vitamin and mineral supplements, crystalline amino acids and feed additives are commonly used to prepare poultry diets. Further, specialist areas such as immuno-nutrition are rapidly gaining attention due to continued advancement in the field of poultry nutrition (Beski et al., 2015).

Abstract

Food is basic need of human for its existence. Food is a source of nutrients needed for growth, energy and protection. There are number of chemical compounds not considered as nutrients but has positive effect on health. There is a need to look into the health benefits of the food components. Many lifestyle diseases are caused by the unhealthy food habits. Developments in science have led to establish the link between food intake and healthy living. Non-nutrient compounds of food are also called phyto-chemicals. Functional foods are prepared by increasing a particular nutrient or phyto-chemical to get health benefits. The increased cost of health care and drugs trigger the developments in this area. The approximate global market size is 30 billion US$ while Japan, United States, and Europe are the leaders in functional foods. FICCI has reported that functional food market in India is worth Rs 4,400 crore with growth rate of 21%per annum.

Introduction

The food has been considered as source of nutrients in the past but increasing evidences has proved that particular types of food can help in preventing the diseases. The World Health Organization (WHO) has reported that deaths due to Non-Communicable diseases are increasing in South East Asian counties; where as CMPN (Communicable, Maternity, Prenatal, and Nutrition) are

Production: According to Food and Agriculture Organization (FAO) of United Nation, the global production of fruits and vegetables including melons was 638 and 1090 million metric tons while India produced 75 and 106 million metric tons in 2011. In addition to this, the world production of roots and tuber was 810 million metric tons whereas India produced 51 million metric tons in 2011. It indicates that fruits and vegetables form an important part of the diet in the world including India. There is an ample opportunity to manufacture various health promoting products based on fruits and vegetables. A number of Fruits and Vegetable based functional food that can be prepared and presented in (Table 1) indicates the role of fruits and vegetables in the nutraceutical production for their health benefits.

Introduction
 
Cardiovascular disease (CVD) is still a major cause of death in Western populations and is becoming an important cause of morbidity and mortality worldwide. Thanks to advanced medical knowledge and treatments, many patients survive an initial event. Because of that, prevention of secondary CVD is a growing task for nutritionists and other health professionals. Cardiovascular risk can be reduced by lifestyle changes, one of which is diet. There is now substantial evidence from epidemiological and clinical studies that a diet rich in fruits, vegetables, unrefined grains, fish and low-fat dairy products, and low in saturated fats and sodium, can reduce the risk of coronary heart disease and hypertension.

Introduction
 
Diabetes shows a wide range of variation in prevalence around the world and it is expected to affect 300 million by the year 2025. In a prevention framework where banning policies and educational strategies lead the interventions, functional foods (FFs) with their specific health effects could, in the future, indicate a new mode of thinking about the relationships between food and health in everyday life. Functional ingredients, such as stevioside, cinnamon, bitter melon, garlic and onion, ginseng, Gymnema sylvestre and fenugreek, have been addressed for their specific actions towards different reactions involved in diabetes development. New strategies involving the use of FF should be validated through large scale population trials, considering validated surrogate end points to evaluate the effect of FF in prevention of chronic diseases such as type 2 diabetes mellitus.

Introduction

The search for weight controlling foods began in the mid 19^th century when industrialization led to widespread obesity. Over the years, people have tried to lose weight by avoiding particular food groups like carbohydrates, eating specific foods such as cabbage soup, or adding a certain ingredient, like vinegar or grapefruit to each meal. Recently scientists have demonstrated that green tea, dairy products, and cinnamon have the potential to improve weight control by altering fat and/or carbohydrate metabolism at the sub-cellular level. Considerable research is needed, however, before these food items can be used to develop effective weight management products.

Introduction

In recent years, food scientists, nutritionists and health experts have become more inclined towards functional food components present in various food sources due to their positive influence on health, which is beyond providing the basic nutrition.Nowa days, generalconsumers are also seeking healthier food options because of nutritive food habits and awareness. Therefore, it has triggered the studyof food and deep mining of food components from nutritional and health benefit’s perspective also. Functional food ingredient can be defined as any componentwhich is more than a source of nutrient i.e. provides additional specific health benefits. Milk is well known to exert positive effect on human health, provides nutrition and widely consumed all across the globe in form of either milk or milk products. As per the definition, milk is heterogeneous blend of lacteal secretion which contains various elements that displays wide range of chemical and functional activities. It has been more than a source nutrition and supplement to different age groups either neonates, youngsters or grown up peoples (Park, 2009). It is one of the basicelements of many diets either in its native form or fermented form which every class of people can afford and had evolved as one of the important nourishment sources. Milk in its native form contains fewer bioactive components while fermentation process produces numerous secondary metabolites which possess various health-beneficial properties (Stanton et al., 2005).

Introduction

Functional food is a natural or processed food that contains biologically active compounds like nutraceauticals and phytochemicals which have health benefit and thus, an important source in the prevention, management and treatment of chronic diseases. For centuries consumption of fruits and vegetables has been attributed to beneficial health effects. Research studies stated that approximately one-third of cancer risk in humans could be attributed to diet. Free radical formation of reactive oxygen species (ROS) and subsequent oxidative stress have been correlated to many human disorders including those of the kidney, eye, lung, liver, nervous system, heart and cardiovascular system. Therefore, foods in our diet that can aid in prevention of these diseases are of major interest to both the scientific community and the general public. Biologically active plant chemicals including traditional nutrients have a beneficial effect on human health. Onion and garlic have received considerable attention for their healthful, functional benefits.

Onion and garlic are the most important vegetable crops grown and consumed almost all over the country. Both the crops belong to the family Alliaceae and have gained the importance of a cash crop in recent years. Maharashtra, Gujarat, Uttar Pradesh, Karnataka, Tamil Nadu, Rajasthan, Andhra Pradesh and Odisha are the major onion growing states whereas Madhya Pradesh, Gujarat, Uttar Pradesh and Odisha are the major garlic growing states. India is a leading producer of onion supporting 20.2% of the world production. Onion is grown in kharif, late kharif and rabi seasons whereas, garlic is grown in rabi season only except in Nilgiri Hills where summer crop is also taken. Onion is normally produced from seeds except multiplier onions where production is taken up vegetatively from bulblets. Garlic is produced vegetatively by planting cloves. Both the crops are rich source of bioactive compounds and have outstanding nutritive value. The nutritive value (per 100g edible portion) of onion and garlic are as follows.

In most countries there is no legislative definition of the term drawing a border line between conventional and functional foods is challenging even for nutrition and food experts. Functional foods do not have a specific place in food law; consequently there is a great deal of confusion about what they are, could or should be. A common perception is that functional foods are foodstuffs either with one or more specific added ingredients (components), or certain substances of common ingredients (components) removed and which are claimed to have a positive influence on human health or well being. The term ‘functional foods’ for this group of products is considered to be an unfortunate one since all foodstuffs are or should be functional and a more appropriate term might be helpful.

Introduction

The tenet “Let food be thy medicine and medicine be thy food,” said by Hippocrates nearly 2,500 years ago, is receiving renewed interest. In particular, there has been an explosion of consumer interest in the health enhancing role of specific foods or physiologically active food components called as functional foods [1]. Clearly, all foods are functional, as they provide taste, aroma, or nutritive value. Within the last decade, however, the term functional as it applies to food has adopted a different meaning - that of providing an additional physiological benefit beyond that of meeting basic nutritional needs.

Abstract

Functional foods and nutraceuticals are one of the fastest-growing segments of the food industry. The demand for these foods is driven by health conscious consumer and the growing awareness of the close connection between diet and health, particularly in relation to chronic diseases. Over the past five years (20082012), the Indian Nutraceuticals Market has been growing at a rapid pace and is expected to rise to US $ 5 billion by 2015. The rapid growth and development of this new industry combined with the need to protect consumer health and interests, has led to the evolution of a myriad of different regulatory frameworks and policies across multiple markets. Japan was one of the first countries to recognize a different category of healthier food products. The Japanese government formally accepted this category in the 1980s. Other developed countries viz. The EU, The US, Canada etc also regulated this sector during 1990s. In India, the Food Safety and Standards Act 2006 (FSSA) was enacted in 2006 in response to pressure from stakeholders and the food industry, transforming the regulation of food in India. Punjab state, with abundance of food grains and increasing trends in fruits and vegetables, provides options for both the producer and growth promotion in the nutraceuticals sector through partenship between research centers, private entrepreneurs and indigenous communities. Regulatory frameworks should focus on the protection of consumers, promotion of fair trade and innovation in the sector. This paper discusses functional foods and nutraceuticals as per food regulations prevalent in various countries and highlights how these regulatory frameworks play a major role in transforming the food sector.

Introduction

The health and wellness continue to drive growth in the global food industry as the consumers are constantly looking for the foods, beverages and other dietary solutions that will help them more aggressively to meet their own unique nutrition and personal health goals. Worldwide countries are going through a nutritional transition and are now affected by double burden of problems like nutritional and food security. The common alarming problems are under nutrition and specific nutrient deficiencies simultaneously coupled with imbalanced diets and chronic diseases. The problem of chronic diseases, non-communicable diseases (cardiovascular diseases, respiratory diseases, diabetes, obesity, cancer etc.) and malnutrition is more serious in the developing countries. The lack of access to health services, sufficient income, healthy and nutritious foods characterize majority of poor people in developing countries. So, food is not only the solution but also viewed as a product to enhance health and wellbeing, and it encourages the producers by supplying new goods that meet these needs. From the past decade, there has been growing consumer awareness regarding health, nutrition and the food safety which are often triggered by specific food incidents, especially in the developed countries and high-income groups in such countries. In the food industry there have been two broad trends which are hazards in the food chain and nutritional profile of the food. There has been recognition that hazards and contaminants can enter the food chain and can cause sickness, death and diseases, and so governments, often to deal with consumer and industry concerns, establish regulations and standards on food hazards including standards on pesticides, antibiotics, microbiological hazards and other chemical and physical contaminants. On the other hand, there is also a growing awareness of the health-enhancing properties for prevention and treatment of health concerns beyond the basic nutritional component of many foods.

Introduction

Increasing knowledge regarding the impact of diet on human health along with state-of-the-art technologies has led to significant nutritional discoveries, product innovations, and mass production on an unprecedented scale. In particular, naturally occurring bioactive extracts or single compounds thereof, that are believed to benefit human health, have spawned an important and dynamic new area of research resulting in substantial advances in nutritional knowledge. There is also growing awareness that dietary source and form of food may affect overall health. Suitably, the role of food as an agent for improving health has been recognized, initiating the development of new classes of food, known as functional foods (Honkanen 2009).

The concept of functional foods is to improve the general conditions of the body and decrease the risk of illness and disease. That is to say, bioactive compounds present as natural constituents or as fortificants in food having the potential to provide health benefits beyond the basic nutritional value of the product. Marine-derived nutrients and other marine bioactive components have excellent potential as functional food ingredients as they possess advantageous physiological effects, with medicinal characteristics and added health benefits such as anticancer or anti-inflammatory activity.

The marine world, due to its phenomenal biodiversity, is a rich natural resource of many biologically active compounds such as polyunsaturated fatty acids (PUFAs), sterols, proteins, polysaccharides, antioxidants and pigments. Many marine organisms live in complex habitats exposed to extreme conditions and, in adapting to new environmental surroundings, they produce a wide variety of secondary (biologically active) metabolites which cannot be found in other organisms. Moreover, considering its great taxonomic diversity, investigations related to the search of new bioactive compounds from the marine environment can be seen as an almost unlimited field.

INTRODUCTION

A food may have three attributes (1) Provide energy and nutrition (2) Give pleasure, i.e., enjoyable aroma, colour, and taste and (3) Health benefits. Functional food has physiological benefits and reduces the risk of chronic disease beyond basic nutrition.

Functional foods, also reported as ‘nutraceuticals’, ‘medical foods’ or ‘designer foods’ in the literature, were first described by Roberfroid (1999) as ‘Food similar in appearance to conventional food that is intended to be consumed as part of a normal diet, but has been modified to subserve physiological roles beyond the provision of simple nutrient requirements’. Examples are iodized salts, vitamin A and vitamin D fortified milk and yoghurt, folic acid enriched bread, soy products, wheat bran and oats products.