eChapters

Introduction

During the last decade, there has been a dramatic increase in use of artificial insemination (AI) by commercial swine producers in many European countries. Till 1990, less than 7% of sows & gilt in the USA were bred by Artificial Insemination. Today, over 70% of the animals are bred by AI. Maybe in a couple of years all swine producers will probably utilize this technology.

In India, it is still in infant stage. Some research work has already been done in scattered ways in various Research Institutes but it is still in the four walls of the laboratory. Some Govt. farms have been doing AI in swine with liquid semen.

Pig is the most important livestock in all Northeastern Hill States and there is no superior indigenous germplasm available in this region. Productivity of local pigs is very low. All through, improvement programmes had undertaken in different state Govt. farms, Central Govt. farms through upgrading with the help of suitable exotic pig breeds like Hampshire, Large Black, and Large White Yorkshire etc. Superior germplasm was distributed to farmers for better productivity. But, improvement till date is not impressive due to lack of superior germless, high feed cost, lack of breeder farmers and lack of incentives to the poor farmers. Maintenance of breeding boar for small farmers is very expensive not only in individual capacity but also on community basis. So, AI is the only tool for quicker, safer, quicker and economic why out for swine improvement like cattle.

Introduction

The modern biotechnologies (animal cloning, stem cells, and transgenesis) have contributed immensely to increasing livestock productivity, particularly in developed countries, and could help to alleviate poverty and hunger, reduce the threats of diseases and ensure environmental sustainability in developing countries. A wide range of biotechnologies are available and have already been used in developing countries in the animal science disciplines, i.e., animal reproduction, genetics and breeding; animal nutrition and production; and animal health. In animal reproduction, genetics and breeding, artificial insemination (AI) has perhaps been the most widely applied animal biotechnology, particularly in combination with cryopreservation, allowing significant genetic improvement for productivity as well as the global dissemination of selected male germplasm. Complementary technologies such as monitoring reproductive hormones, oestrus synchronization and semen sexing can improve the efficiency of AI. Embryo transfer provides the same opportunities for females, albeit on a much smaller scale and at a much greater price. Biotechnologies in animal health are used to increase the precision of disease diagnosis as well as for disease control and treatment. The Biotechnology Industry Organization claims that the genetic engineering of animals in agriculture offers ''tremendous benefit to the animal by enhancing health, well-being and animal welfare'' (Gottlieb and Wheeler 2008). Further, improvements are still needed in product composition and production efficiency, especially in growth, disease resistance, and reproduction. In this regard, transgenic animals stem cells, cloning and other emerging biotechnologies will have important roles in producing more and higher quality animal food.

Introduction

The livestock occupies a significant niche in the social fabric of the Indian subcontinent from the dawn of civilization. During the initial days of civilization, animals served human society in many ways. The livestock is not only producing high biological value products i.e., milk, meat but also provide manure for maintaining soil health, draught power for crop production, wool and fiber for apparel industry, low cost means of transport in rural and desert areas, companion for sports and of course a "readily disposable asset" for any kind of emergency expenditure. Hence, livestock represents one of the major driving forces for the growth of the rural economy. As a result, the livestock industry becomes one of the niche sectors of the national economy to propel faster growth along with securing the livelihood of millions of people. During the twentieth century, balanced ration was the key focal point of animal nutrition research either for enhancing the productivity or managing the livestock economy through interventions of knowledge in the areas of improvement of poor quality roughages, bypass protein, bypass fat, mineral supplements, complete feed blocks, vitamins, area specific mineral mixture, feed additives such as antibiotics, ionophores, hormones etc. However, during the beginning of the twenty first century, several issues appeared pertaining to the livestock sector such as feed quality and safety, designer animal products, healthy animal products, ecological treatment for digestive disorder, organic animal production, residues of antibiotics, hormones and heavy metals in accordance with the consumer preference and awareness. In the light of concerns on "transfer of antibiotic resistance genes from animal to human", several nations have imposed bans on application of antibiotics as feed additives. Keeping in view the above perspective, research is underway around the world to find alternatives to antibiotics to guard the gastrointestinal of animals without compromising productivity or product quality of livestock.

Introduction

Advancement in agricultural research has increased productivity however, in recent years, poor linkage of research - extension services hampering the growth of agriculture sector. Firstly, the research problems are investigated without considering the priority of agricultural producers Secondly, knowledge generated at the agriculture research stations is not effectively transferred to the producers. Many studies have identified the weaknesses in the linkages between the research and extension institutions are the major reason for development of technology and its transfer. In most countries including our country, the communication between research and extension agencies is weak (USAID 1982, FAO 1984). Research-extension-farmer linkages are seen to be absent or weak in many instances. At the same time, there are duplications of efforts, with a multiplicity of agents attending to extension work without adequate coordination (Planning Commission, 2008). This ineffective linkage between research and extension has impeded the generation and transfer of technology appropriate for small-scale and resource poor farmers, particularly those who work in relatively low productive and heterogeneous agro-ecological areas (Ewell 1989). Problems in technology generation and transfer arise because these components are considered in isolation (World Bank 1985).

Introduction

Pastoralism involving rearing of different livestock species makes significant contributions to the economy of developing countries, both in terms of providing employment and income opportunities and in supplying nutrition to rural poor. Pastoralism generally has a mobile aspect, and movement of animal herds in search of fresh pastures and water is a key feature qualifying pastoralism. The term nomadic is used when mobility is high and in irregular patterns; transhumant when there are regular back-and-forth movements between relatively fixed locations; and sedentary for the rest. Pastoralists inhabit zones where the potential for crop cultivation is limited due to steep terrain, extreme temperatures and low and highly variable rainfall. Within this unpredictable, vulnerable and dynamic environment, they have developed successful mechanisms of adaptation to maintain an ecological balance between themselves and the natural environment. Thus, pastoralism is a successful strategy to support a population on less productive land that adapts well to the environment. Transhumance is the seasonal migration of livestock and pastoralists between higher and lower pastures.

Introduction

India contributes about 5% to the world's eggs and 2.25% to chicken production (FAOSTAT, 2013). Indian Poultry Sector has been one of the fastest growing components of Indian economy with an annual compound growth rate of about 6% and 12% in egg broiler production, respectively. Poultry sector accounts for about 1% of the India's Gross Domestic Product (GDP) and 11.7% of the livestock GDP (National Account Statistics, 2013). With a turnover of over ?600 billion, the sector provides employment to over six million people. The annual per capita availability has increased from 7 eggs in 1961 to 58 eggs in 2012; and poultry meat from 0.16 kg to 2.21 kg during the same period. However, the present availability levels are still far below the ICMR recommendations of 180 eggs and 11 kg meat per capita per annum. Ironically, consumption of poultry products has been highly skewed in favour of urban population. In fact, only 31% of the population residing in urban areas consumes 65% eggs and 70% of poultry meat and in a typical Indian village the egg consumption is not more than 10 eggs per capita per year. Despite higher prices of poultry products in rural areas, the penetrability and reach of poultry products have remained limited in rural India owing to fragmented markets and infrastructural bottlenecks. Sekhon and Tejinder (2007) have estimated that under a moderate growth scenario of 6% per annum in the Country's GDP the demand for meat and eggs is likely to shoot up to 9.7 and 15.32 MMT by 2021 and 2030, respectively. India would be easily able to meet this demand provided, the poultry egg and meat production continue to grow at the current levels.

Introduction

Meat has become an integral part of human food to meet the essential nutrients, like proteins. For a balanced diet, a good biological availability of meat is preferred in the modern day era. The per capita consumption of meat in India is only 14g per day as against the actual requirement of 125g. Non availability of quality meat and its exorbitant prices have restricted meat consumption. Increasing the meat production through intensive rearing of various meat animals will help to meet the ever growing demand of a balanced human diet. In the modern era and educational status social taboos are also getting relegated with need of quality proteins.

The very important role of pigs in human life is control of environmental pollution by scavenging the biological waste. Pig converts biological waste material to quality proteins in the form of pork. Pigs have a rapid growth rate, high reproductive efficacy, require comparatively less space, and can be reared on small scale in backyards or as commercial units.

Introduction

In the last two decades, there has been a significant change in the Indian society, not only in the terms of economics following the post 1991 reforms but also in the dietary and health sectors. There is an increasing demand for livestock products, as a result the farming systems are becoming more and more intensive. With the high input intensive agricultural practices on the one hand, the limitations in terms of environmental degradation, loss of biodiversity, health hazards to consumers, etc. are also on the rise which are acting as limiting factors to continue on the same path of intensification. To achieve sustainable intensification of agriculture, mixed crop-livestock systems, combining livestock and cash crops at farm level, are considered to be a good alternative (Russelle et al, 2007; Wilkins, 2008; Ryschawy et al., 2012). These practices benefit the environment by improving nutrient cycling (Hendrickson et al., 2008). In the agriculture based states of India, about 50% of the income is from the crop-livestock systems (Deshingkar et al., 2008). Mixed crop-livestock systems also generate higher economic efficiency in saving production costs through complementaries between crop and livestock (Wilkins, 2008). Apart from direct income by diversifying production, there is an added advantage of reducing risks with regard to market fluctuations (Russelle et al., 2007).

Introduction

Food security is defined as "a situation that exists when all people, at all times, have physical, social and economic access to sufficient, safe and nutritious food that meets their dietary needs and food preferences for an active and healthy life" (The State of Food Insecurity, 2001) (see http://www.who.int/trade/glossary/story028/en/). As of 2015, the concept of food security has mostly focused on food calories rather than the quality and nutrition of food. Thus, food security usually emphasizes food quantity and therefore "nutrition security" is used for the quality dimension. The concept of food security has four dimensions: availability, accessibility, utilization and vulnerability. The interactions among them determine how food secure a country is or how adequate, steady and risk-free food consumption is at the household and individual levels (Kumar and Ayyappan, 2014). Though substantial progress has been achieved in reducing food insecurity, maintaining food security at the national and household level is a major challenge for India (Singh, 2014). The present article briefs about global and Indian scenarios on food security aspects, and the key role of livestock in achieving zero hunger by means of livestock-derived foods such as milk, egg and meat products.

20.1 Unit Testing in Python Programming

The process of testing wheather a particular unit is working properly or not is called unit testing. A unit test checks small component in your application

Example

def testsum1():

assert sum([1,2,3])==6 def testsum2():

assert sum([1,1,1])==6 #assertion error

testsum1()

testsum2()

20.1.1 Step Involved in Unit Testing

(1) Import unittest from library.

(2) Create a class for test and inherit (unittest.TestCase).

(3) Write the test function in the class.

(4) Call unittest.main()

19.1 Python Turtle Graphics

Turtle is a special feathers of Python. Using Turtle, we can easily draw in a drawing board.

First we import the turtle module. Then create a window, next we create turtle object and using turtle method we can draw in the drawing board.

19.2 Some Turtle Method

Example

from turtle import *

t = Turtle() #object in python

wn=Screen()

wn.title(?my first graphic”)

wn.bgcolor(?yellow”) #color filling in window

t.shape(?turtle”) #turtle shape given

t.color(?red”, “green”)

18.1 Library Introduction

This library contains modules for various types of functionalities. Some commonly use module of python standard library are:

(i) math module: which provides mathematical function to support difference types of calaculations.

(ii) cmath modules: which provides mathematical function for complex number.

(iii) random module: which provides function generation random number.

(iv) staticstics module: which provides mathematical satical function.

(v) urllib module: which provides URL handling function so that you can access websites from within your program.

1. NmPy library, provides some advance math functionalities along with tools to create and manipulate numeric arrays.

2. Scipy library, provides algorithmic and mathematical tools for scientific calculations.

17.1 Modules

• A module is a file containing python definitions and statements.

• A python module is (.py file) containing variables, class definitions, statement and function related to a particular task. The major feature of having module is that its content can be reused in other programs, without having to rewrite or recreate them.

• They are executed only the first time the module name is encounter in an import statement.

Type of modules:

• User defined modules

• Built-in modules

Ex.-array, math, numpy, sys, etc.

16.1 OOP in python

Object-oriented programming (OOP) is a programming language model which organized object and data.

16.1.1 What is Encapsulation

If same variable is reapet in two different palce then which problem is solved using encapsulation it means one variable is making private otherwise program generate error.

16.1.2 Abstraction

Abstraction in Python is the process of hiding the real implementation of an application from the user and emphasizing only on usage of it. For example, consider you have bought a new electronic gadget. Along with the gadget, you get a user guide, instructing how to use the application, but this user guide has no info regarding the internal working of the gadget.

Another example is, when you use TV remote, you do not know how pressing a key in the remote changes the channel internally on the TV. You just know that pressing + volume key will increase the volume.

15.1 Data Visualization

Data visualization is the graphical representation of information and data. By using different visual elements like charts, graphs and maps. Data visualization tool provides easy way to see the understand the data and related trend/pattern.

1. There are multiple tools available for data visualization using which we can perform data visualization.

2. In python we can use a library called “matplot” for data visualization.

3. Python based plotting library “matplotlib” enables us to produce 2D as well as 3D graphics i.e. charts/graphs.

4. Pyplot interface of matplotlib is used for representing 2D graphs.

14.1 Basic Plotting: plot

This functionality on Series and DataFrame is just a simple wrapper around the matplotlib libraries plot() method.

Example

import pandas as pd

import numpy as np

df = pd.DataFrame(np.random.randn(10,4),index=pd.date_range(‘1/1/2000’, periods=10), columns=list(‘ABCD’))

df.plot()

Its output is as follows:

If the index consists of dates, it calls gct().autofmt_xdate() to format the x-axis as shown in the above illustration.

13.1 Statistical Functions

Statistical methods help in the understanding and analyzing the behavior of data. We will now learn a few statistical functions, which we can apply on Pandas objects.

Percent_change

Series, DatFrames and Panel, all have the function pct_change(). This function compares every element with its prior element and computes the change percentage.

Example

import pandas as pd

import numpy as np

s = pd.Series([1,2,3,4,5,4])

print s.pct_change()

df = pd.DataFrame(np.random.randn(5, 2))

print(df.pct_change())

12.1 Introduction Basic Functionality

By now, we learnt about the three Pandas DataStructures and how to create them. We will majorly focus on the DataFrame objects because of its importance in the real time data processing and also discuss a few other DataStructures.

12.2 Series Basic Functionality

Let us now create a Series and see all the above tabulated attributes operation

Example

import pandas as pd

import numpy as np

#Create a series with 100 random numbers

s = pd.Series(np.random.randn(4))

print(s)

Its output is as follows:

0 0.967853

1 -0.148368

2 -1.395906

3 -1.758394 dtype: float64

11.1 Introduction

Pandas is an open-source Python Library providing high-performance data manipulation and analysis tool using its powerful data structures. The name Pandas is derived from the word Panel Data - an Econometrics from Multidimensional data.

In 2008, developer Wes McKinney started developing pandas when in need of high performance, flexible tool for analysis of data.

Prior to Pandas, Python was majorly used for data munging and preparation. It had very little contribution towards data analysis. Pandas solved this problem. Using Pandas, we can accomplish five typical steps in the processing and analysis of data, regardless of the origin of data - load, prepare, manipulate, model, and analyze.

Python with Pandas is used in a wide range of fields including academic and commercial domains including finance, economics, Statistics, analytics, etc.

10.1 Lambda Function

Lambda Function or anonymous function in python programming

A lambda function can take any number of arguments, but can only have one expression.

Syntax:

Lambda arguments: expression only single line

The expression is executed and the result is returned.

Example

x=lambda a:a+10

Print(x(5))

9.1 Introduction Numpy

Numpy: is apython package which stands for “Numerical python”.

This was created in 2005 by Travis Oliphant.

Using numpy we can perform the following functionalities:

1. Mathematical and logical calculation on array.

2. Fourier transforms and routines for shape manipulation.

3. It has built in functions for linear algebra random number generation.

4. Used for scientific calculations.

5. It is faster than python list.

6. It is fast because it is associated with c programming.

NumPy is often called as an alternate for MatLab (a programming platform designed specifically for engineers and scientists for data analysis, developing algorithms, create models and application etc.)

8.1 Introduction to Dictionary in Python

A dictionary is a collection which is unordered changeable and index. In python dictionaries are written within curly brackets, and they have keys and values. Means the dictionary contains two things first is the key and the second is the value.

8.1.1 Create and Print a Dictionary

Example

dict1={‘brand’:‘Suzuki’,‘model’:‘dzire’,‘year’:2020}

print(dict1)

Accessing items: you can access the items of a dictionary by referring to its key name, inside square brackets.

Example

Accessing items: there is also a method called get() for the same task.

dict1={‘brand’:‘Suzuki’,‘model’:‘dzire’,‘year’:2020}

print(dict1)

y=dict1.get(?model”)

print(y)

7.1 Tuple Introduction

A tuple is a collection which is order and unchangeable. In python tuples are written with round brackets. Tuples in python are very similar to list which contains different types of elements with the following major differences.

It is declared as

tuple1=(1,2,3,“ram”,“shyam”)

Program implementation import timeit

listtime=timeit.timeit(stmt=“[1,2,3,4,5,6,7,8,9]”,number=1000000)

tupletime=timeit.timeit(stmt=“(1,2,3,4,5,6,7,8,9)”,number=1000000)

print(?List takes time:”, listtime)

print(?Tuple takes time:”, tupletime)

6.1 List Introduction

1. List is a collection of different values or different types of items.

2. Unlike array in c/c++/java a list is capable of storing different types of values under one roof.

3. The items in the list are separated with the comma (,) and enclosed with the square brackets [].

4. List provides us the facility to store multiple types of in a single unit.

Example:

a=[“ram”,1,“shyam”,12.5]

b=[1,2,3,4]

a[0]=ram

a=[“ram”,1,“shyam”,12.5]

print(a)

print(a[0])

ram

5.1 String Statement

String in python is stored as individual characters i.e. indexed wise. The index by default starts with 0.

So, here P will be represented by str[0] or str[-6], y will be represented by str[1] or str[-5]

Note: strings are immutable and hence you cannot change the individual letters of string using assignment operator.

Example:

name=“shyam”

Name[0]=“A”

Result error

4.1 Introduction to Function in Python

Python Functions is a block of related statements designed to perform a computational, logical, or evaluative task. The idea is to put some commonly or repeatedly done tasks together and make a function so that instead of writing the same code again and again for different inputs, we can do the function calls to reuse code contained in it over and over again. Functions can be both built-in or user-defined.

Function means sub-program

1. Function definition

2. Function call

Example:

def message: #function definition

print(?hello python”)

message() #function call

3.1 Control statement in python

Python statements are executed one by one in the same order as they appear in the program. But there may be some requirement when we want to execute the statements based upon a condition. Even there may be some situation where we want to execute a single statement or multiple statement (block of statement) “n” times till the condition is true. So in order to control the flow of execution of the program python provides us control statements.

There are two types of control statements:

(a) Selection statement

(i) if

(b) Looping condition

(i) While (ii) for

2.1 Operators

Operators are those who perform some specific operation. Python has a wide variety of operators. The various python operators are categorized into:

1. Arithmetic operators

2. Comparison/relational operators

3. Assignment operators

4. Logical operators

5. Identity operators

6. Membership operators

7. Bitwise operator

1.1 Introduction

Python is an interpreter, high level, general purpose programming language developed by Guido Van Rossum and its first version was released in 1991. There are two major Python versions: Python 2 and Python 3. Both are quite different.

1.2 Beginning with Python Programming

1.2.1 Finding an Interpreter

Before we start Python programming, we need to have an interpreter to interpret and run our programs.

Windows: There are many interpreters available freely to run Python scripts like IDLE (Integrated Development Environment) that comes bundled with the Python software downloaded from http://python.org/.

Linux: Python comes preinstalled with popular Linux distros such as Ubuntu and Fedora. To check which version of Python you’re running, type “python” in the terminal emulator. The interpreter should start and print the version number.

macOS: Generally, Python 2.7 comes bundled with macOS. You’ll have to manually install Python 3 from http://python.org/.

Violaceae

Morphological characteristics

Banafsha is a small perennial herb with a short semi-subterranean fleshy stem (rootstock).The older parts bear fibrous roots. The upper younger portion is marked with close circular scars of the leaves of the previous years, and gives off elongated, rather fleshy, leafless runners. Leaves are ovate and crenate–serrate.

Floral characteristics

Flowers are borne on long, slender, axillary stalks (scapes) exceeding the leaves. Flowers are lilac, blue, white or purple in colour and borne on the main stem, the larger ones being 6–12 mm in diameter. The flowers arising from the axils of the cauline leaves are minute. The cleistogamous (underground) flowers measure about 1 mm across. Fruit is a few seeded, globose capsule. Flowering occurs during February–March, while fruiting occurs during April–May.

Morphological characteristics

A large elegant evergreen tree, grows up to 30 m. high, with a clean, cylindrical bole of 15 m. and a girth of 4.5 m. Bark is rough, whitish to grey, peeling off in thick round flakes. Leaves are coriaceous, Ovate to Oblong, entire (Leaf falls in March, new foliage appears in April-May, the second flush of foliage starts after rains, in October to December.) Fruit is a Capsule, ovoid, pale brown, fleshy, 8 to 11cm long, and 3.5 to 6 cm in Diameter. 1 seeded, reddish white, filled with fat. Ripens during June to July.

Floral characteristics

Flowers are bisexual, about 2 cm across, white, slightly fragrant, arranged in panicles. Panicle is robust, multi-branched, up to 15 cm long and drooping. Fruit is capsules, 4-6 cm X 2-4 cm in size, pale brown, fleshy, hard when dry, splitting by 3 valves when ripe.

Distribution

A slow-growing species, Endemic & found primarily in the South west coast evergreen forests, upto an altitude of 750 m, and also occasionally in secondary evergreen dipterocarp forest in the states of Karnataka, Kerala & Tamil Nadu.

Tinospora cordifolia (Thunb.) Miers (family: Menispermaceae) commonly known as “Amrita” or” Guduchi” of “Giloy” is a climbing shrub found throughout India. T. cordifolia has high medicinal value in the world and is also the number one recommended natural herb for the Indian system of medicine (ISM) which has been used over centuries to treat various diseases. The roots and stems contain several secondary metabolites having curative properties. The species is endemic to India and is common throughout tropical and subtropical zones at an altitude of 600 m.

Species

• Tinospora cordifolia (Willd.) Miers ex Hook. F & Thoms
• Cocculus cordifolius DC.
• Menispermum cardifolium Willd
• T. glabra (N. Burm.) Merr.

Morphological characteristics

It is a big climber that grows over the highest trees in the forest and produces aerial roots up to 10 metres long. It’s a sprawling climbing shrub with a slew of elongated twining branches. Giloy leaves are simple, exstipulate, alternating, with long petioles up to 15 cm long, pulvinate, and roundish at the base and apex, with the basal one being longer and twisted partially and halfway around. Oval-cordate or roughly oval lamina, 15-20 cm long and 10-15 cm wide, 7 nerved and deeply cordate at base, glabrous above, membranous, whitish yellow with a conspicuous reticulum beneath.

Morphological characteristics

Tecomella undulata is a slow growing small deciduous tree with drooping branches and grey-tomentose innovations which are otherwise glabrous. Leaves are usually opposite, 5- 10 cm long, simple, narrowly oblong, obtuse and entire with undulate margins.

Floral characteristics

Flowers are pale-yellow to deep orange, arranged in few flowered corymbose racemes on short lateral branches. Calyx is campanulate, lobes broadly ovate, obtuse and mucronate. Corolla is companulate, veined, stamens exserted, flaments glabrous, stigma 2-lamillate. Capsules are slightly curved, smooth and seeds are winged.

Distribution

Plant is distributed in drier parts of North-West and Western India extending eastwards to the river Yamuna and ascending to an altitude of 1200 meter in the outer Himalaya.

Climate and Soil The plant prefers subtropical climate having medium to light soil.

Morphological characteristics

Strychnos nux-vomica is a medium sized deciduous tree. The trunk is tall, thick, straight and cylindrical covered with yellowish-grey to dark grey, smooth and thin barks. Wood is dense, hard white and close grained. Branches are irregular and covered with smooth ash colored bark and shiny dark green young shoots. Leaves are broad, opposite, simple and entire, smooth, short-stalked, blade orbicular to broadly elliptical or ovate, base rounded to cordate, apex shortly acuminate or acute, glabrous and shiny above, minutely hairy especially on veins beneath, 3–5-veined from the base.

Floral characteristics

Inflorescence is terminal cymes, many-flowered and appears with young leaves at the end of branchlets or on axillary shoots. Flowers hermaphrodite, actinomorphic, homogamous, greenish-white colored, small in size, nectariferous, funnel-shaped and emits unpleasant odour. Flower are pentamerous; calyx lobes ovate, outside densely hairy. Corolla bears a slender tube of 1 cm long, abruptly widening at the throat, outside glabrous, having pubescence at base, lobes narrowly ovate, of 3 mm long, margin thickened and minutely hairy, greenish white to white; stamens inserted at the mouth of the corolla tube, exserted altering with corolla lobes. Anthers pale cream in color, dithecous, introrse and dehisce longitudinally. Ovary is superior, ovoid, glabrous, bicarpellary with axile placentation. The style is filiform, glabrous and as long as the corolla tube, stigma capitates (head-shaped).

In the coffee family Rubiaceae, Rubia cordifolia L. (RC) is a useful medicinal plant in the Ayurvedic system due to its many pharmacological characteristics. It is also known as common Madder or Indian Madder. It was grown for a red pigment generated from the roots. Rubia was divided into roughly 70 species that were found all over the world, including 36 species and two variants described from China. Because of their high bioactivities, Rubia plant extracts and phytochemicals have gotten a lot of interest.

Morphological characteristics

It is a perennial, prickly climber with a stem, growing up to 12 m long. Leaves are highly variable, ovate lanceolate, 5-7 nerved, 2-10 cm long and 2-5 cm broad, occurring in whorls of 4-6. The stems are slender and quadrangular. The leaves are simple, opposite and stipulate, the stipule is interpetiolar. The petiole is 1.5–3 cm long. The blade is lanceolate, 1.5–5 cm × 0.5–2.5 cm, cordate at base, obtuse acuminate at apex and displays three to five longitudinal nerves. Roots are perennial, long, cylindrical, and rusty brown in colour

Morphological characteristics

Rewand chini is a perennial stout herb, 1.5–3.0 m tall. Roots are very stout and thick. Leaves are radical, orbicular, or broadly ovate, very large, and 30–45 cm in diameter with long petioles.

Floral characteristics

Flowers are small, dark purple or pale red in axillary panicles. The plant has three to five years of juvenile phase, followed by reproductive phase. Flowering occurs in June–July. Seeds are collected in late August–September, when they turn dark brown. Seed production potential varies from 300 seeds to 950 seeds per plant.

Distribution

The species occurs in the temperate Himalayas, from Kashmir to Sikkim, at an elevation of 2800–4000 m. It is found in alpine zone on rocky soil, moraines, and crevices, between boulders and near streams in specific pockets. It is sporadically cultivated in the North-eastern states for its leaves, which are used as vegetable.

Climate and soil

Rewand chini plant is restricted to the temperate, sub-alpine, and alpine zones of the Himalayas. Well-drained, porous, humus-rich soil is suitable for its cultivation. It prefers exposed or partially shaded habitat and can be cultivated on altitudes above 1800 m in height.

Morphological characteristics

Straight bole, longitudinally fissured bark, imparipinnate and elliptic leaves, fragrant flowers in huge panicles, and winged, flat pods distinguish Pterocarpus species in the field. The tree can grow up to 30 metres tall and 2.5 metres wide, with a straight and clean bole. The bark is scaly, tough, and fissured longitudinally. Leaflets are five to seven in number, 8–13 cm long, oblong or elliptic in shape, or rotund in shape, with 15–20 pairs of lateral veins. Kino-gum is a fragrant, brittle, almost black oleo-resin obtained from tree trunks that is angular and glistering and comes in minute flakes..

Floral characteristics

Yellow flowers bloom in panicles that are 1–5 cm long and fragrant. Flat, orbicular, winged pods with a diameter of up to 5 cm. Seeds range from one to three in number, are bony, and have a convex form. Flowering starts in November, and fruits lasts until March.

Distribution

The tree can be found in central and peninsular India, primarily in dry mixed deciduous tropical forests in Gujarat and Madhya Pradesh, as well as sub-Himalayan tracts, at elevations of up to 1000 metres. Natural populations have plummeted, and there are hardly any fragile young saplings in the forest. Due to a lack of autogenic reproduction, this species is endangered.

Plants containing lignans have been utilised as folk medicines in traditional medicine of many different cultures for over 1000 years. Plants high in lignin, such as Kadsura coccinea (Schizandraceae), Fraxinus sp., and Olea europaea, have long been employed in Chinese, Japanese, and Eastern world folk medicine. Lignans are an important family of starting products for the development of new therapeutic agents based on structural modifications of such compounds due to their widespread use in traditional medicine. Podophyllum hexandrum, a plant with a high lignin concentration, has been employed throughout history and in modern times. It has been used extensively in ancient Ayurvedic medicine to treat a variety of disorders such as Condyloma acuminate, Taenia capitis, monocytoid leukemia, Hodgkin’s disease, non-Hodgkin’s Lymphoma, cancer of brain, lung, bladder and venereal warts.

The Himalayan locals have long used Indian Podophyllum, with an aqueous extract of the roots being a frequent cathartic. It has also been used as an ophthalmia treatment. Thomson tested the resin from the Indian plant in 1890 and found 56 percent podophyllotoxin concentration. Podwyssotzki discovered podophyllotoxin as the active principle of podophyllin in 1880 and obtained it in a pure state. Several lignans have been found in the rhizomes of Podophyllum hexandrum, which are dimerization products of phenylpropanoid pathway intermediates linked by the central carbons of their side chains.

Pistacia integerrima Stewart (Pistaceaceae) is an ethnobotanically important tree native to Asia. Pistacia integerrima is a species of pistachio tree native to Asia, commonly called zebrawood or the crab’s claw. It is often classified as Pistacia chinensis ssp. integerrima.

Pistacia integerrima, commonly known as kakra shingi, is a moderate-sized deciduous tree, up to 18 m in height, with a short stout bole found in the Himalayas from Indus to Kumaon. Hard, horn-shaped, rugose, hollow galls like excrescences are formed on the leaves and petioles of the plant by an insect of Pemphigus species. Dry powdered galls have a very astringent and slightly bitter taste and terebinthine odour. This tree is also used as a rootstock in the cultivation of commercial pistachios

Morphological characteristics

It is a moderate sized deciduous tree with rough grey bark. Leaves are 15-23 cm long with or without a terminal leaflet. Leaflet is stalked, 4-5 sub-opposite pairs, lanceolate, coriaceous, entire and arched. Flowers are greenish-yellow or brownish in colour, dioecious, 0.2 cm diameter, reddish in lateral, puberulous panicles, appearing with or just before the young leaves.

Oroxylum indicum (L.) Vent. (family Bignoniaceae Juss.) also known as Broken bones tree, Indian trumpet flower, Midnight horror, Shivnak, Sonapatha and Shyonaka. O. indicum is being used as medicinal herb for thousands of years without any known adverse effects. The tree is named as ^”Tree of Damocles^” after an incident depicted in an ancient story by Cicero. O. indicum Vent is a small or medium sized deciduous tree growing throughout Asia continent. It has been used traditionally for a wide diversity of ailments such as cancer, diarrhea, fever, ulcer, jaundice and arthritis. Destructive and non-sustainable collection methods coupled with low regeneration and habitat destruction have posed serious threats to the survival and availability of this highly useful tree. The existence of O. indicum in natural population is highly threatened and it has been categorized as endangered and vulnerable by the Government of India. There have been number of scientific studies conducted to evaluate the toxic effects of the plant. Almost all the studies have shown that O. indicum is not toxic to humans even up to high doses.

Morphological characteristics

O. indicum is a small to medium-sized deciduous tree with soft light brown or greyish brown bark and corky lenticels that grows up to 12 metres tall. The leaves are big, 90-180 cm long, 2-3 pinnate with 5 or more pairs of primary pinnae, rachis is fast, cylindrical, swelling at branch junctions, leaflets are 2-4 pairs, oblong or elliptic, acuminate, glabrous. The enormous leaf stalks wither and fall off the tree, accumulating towards the trunk’s base and resembling a jumble of broken limb bones.

Operculina turpethum (OT) Silva Manso, also known as Tihudi/Trivrit due to its triangular stem, is an Ayurvedic herb from India that belongs to the Convolvulaceae family. Indian Jalap/Turpeth root in English, Nisoth/Turpeth/ Panila/Pithori in Hindi, Trivrit in Sanskrit, Tegada in Telugu, Trikolpakkonna/ Triputa/Sivata in Malayalam, Sigade in Kannada, and Kumbham/Sivatai in Tamil are some of the other names for it. It grows up to 1000 square feet on Indian roadsides and is occasionally cultivated as an adornment in gardens.

Morphological characteristics

The crop is a fragrant perennial creeper with a basic stem that might be triangular or rectangular. The leaves are many and oval in shape, measuring 2 to 5 inches in length. It consists of cylindrical pieces of root and stem, 1.5-15 cm long x 1-5 cm diameter, with the central woody portion removed by splitting the bark on one side, external surface longitudinally furrowed giving the drug a rope-like appearance, odour distinct but unpleasant or musty, taste bland at first, then slightly acrid, fracture short in bark and fibrous in wood, odour distinct but unpleasant or musty. The root portions are cylindrical, twisted, and a dull grey tint on the outside. The flower arrangement is 1 to 4 inches long and includes three to four branches with white blooms. Fruit is round ½ or ¾ inch in diameter, it bears 4 shiny 2 inch long seeds. The plant bears fruits and flowers from March to December.

Morphological characteristics

Nardostachys species is a perennial rooted herb with a strong woody main root that grows 10-60 cm tall. The rootstock is strong and lengthy, with petioles of withered leaves clinging to it. The stems are pubescent above and glabrate below. Leaves are both Cauline and radical. Cauline leaves are sessile, occur in two to three pairs, are 2.0 cm 0.6 cm in size, decrease in size from base to top, and are oblong or sub-ovate in shape. Radical leaves are large (15-22 cm 1.5-2.5 cm), six to eight in number, longitudinally nerved, slightly pubescent, and narrow down into the petiole, whereas cauline leaves are sessile, occur in two to three pairs, are longitudinally nerved, The jatamansi rhizome is dark brown, tapered, and densely coated with the remains of old leaf bases, giving it the appearance of a heavy beard, and hence the name jatamansi. The fibrous rhizome may be 6-9 cm long with about 20-30 cm-long yellowish taproot. A single root may bear 30-50 rhizomes.

Floral characteristics

Flowering shoots are 30–40 cm tall and produce 40–50 blooms in three to seven condensed cymes at the summit. Flowers are campanulate and range in colour from pinkish red to bluish white. The hairy corolla tube is 6 mm long. The 4-mm-long hairs on the fruit are capped by the sharp, often dentate, calyx teeth. Flowering takes place between June and August, depending on elevation, while fruits takes place between September and October. Seeds are gathered in October when they turn pale brown in colour.

Juniperus communis, the common juniper, is a species of small tree or shrub in the cypress family Cupressaceae. This evergreen conifer has the largest geographical range of any woody plant, with a circumpolar distribution throughout the cool temperate Northern Hemisphere from theArctic south in mountains to around 30°N latitude in North America, Europe and Asia. Relict populations can be found in the Atlas Mountains of Africa.

As to be expected from the wide range, J. communis is very variable, with several infraspecific taxa; delimitation between the taxa is still uncertain, with genetic data not matching morphological data well.

• Subsp. communis – Common juniper. Usually an erect shrub or small tree; leaves long, 8–20(–27) mm; cones small, 5–8 mm, usually shorter than the leaves; found at low to moderate altitude in temperate climates.
• Subsp. communis var. communis – Europe, most of northern Asia
• Subsp. communis var. depressa Pursh – North America, Sierra Nevada in California
• Subsp. communis var. hemisphaerica (J.Presl & C.Presl) Parl. – Mediterranean mountains
• Subsp. communis var. nipponica (Maxim.) E.H.Wilson – Japan (status uncertain, often treated as J. rigida var. nipponica)

Inula racemosa is an Asian plant in the daisy family native to the temperate and alpine western Himalayas of Xinjiang, Afghanistan, Kashmir, Nepal, Pakistan. Inula racemosa Hook. f., is a critically endangered perennial herb distributed throughout the Himalaya; commercially useful in pharmaceutical products.

Morphological characteristics

The species is a perennial herb that grows up to 1.5 metres tall & has a scented root and rootstock. Large number of stems ascend from the rootstock’s base. Leaves are leathery, rough above and densely hairy below, 25-50 cm long and 10-12 cm wide, and elliptic-lanceolate in shape, 25-50 cm long and 10-12 cm wide.

Floral biology

Flower heads are yellow with bisexual florets and arise in terminal racemes. Flowering takes place from January to July, while fruiting takes place from October to November. Fruits (achenes) are slender and about 0.5 cm long.

Diabetes mellitus is a severe endocrine illness that affects almost 10% of the world’s population and is a serious public health concern. In its most severe form, the disease affects major body systems, resulting in multiorgan problems. Oral hypoglycemic medicines such as sulphonylureas and biguanides are the most commonly used treatments, although their negative side effects are a significant drawback. Herbal medications are gaining popularity as a result of their superior outcomes and safety when compared to commercially available drugs, as well as their ability to address health problems more effectively.

Plants with anti-diabetic qualities are of particular interest to the ethnobotanical community since they are known to contain useful medicinal properties in various parts of the world, and a number of them have demonstrated variable degrees of hypoglycemic and antihyperglycemic action. Several plant species that are high in terpenoids, flavonoids, phenolics, coumarins, and other bioactive compounds have been found to lower blood sugar levels.

Gudmar (Gymnema sylvestre Retz) is a valuable medicinal woody climber from the Asclepiadaceae family. The medicinal climber is well-known for its antidiabetic qualities. Its formulations have potent taste modifying properties, reducing sweet taste sensations in particular. Gymnema sylvestre is known in Hindi as gurmar, which means “sugar destroyer.” The plant has become vulnerable as a result of increased demand and destructive harvesting. The genus is classified into 40 species, some of which like G. sylvestre, G. montanum, G. yunnanense, and G. inodorum have medicinal properties. The leaf extracts contain gymnemic acids, the major bioactive constituents that interact with taste receptors on the tongue to temporarily suppress the taste of sweetness.

Morphological characteristics

It is a moderately deciduous tree with straight trunk and numerous spreading branches, which form large shady crown with whitish grey corky lenticellate bark, exfoliating in thin flakes. It has a clear bole of 6.0-9.0 meter, and a girth 1.5-2.5m. Branchlets and young parts are clothed with fine white mealy pubescence. Leaves are simple, opposite, broadly ovate, cordate, glandular, glabrous above when mature and fulvous-tomentose beneath. It attains its largest dimension in the mixed forests of moist region as in the eastern sub Himalayan track, Assam and elsewhere in south India.

Floral characteristics

Flowers are 2.5-5.0 cm in diameter, brownish yellow that ends in terminal panicle. Calyx is campanulate, pubescent outside and with 5 lobes. Corolla is showy, brownish yellow with short tube and oblique limbs. Stamens are 4 in number and didynamous. Ovary is 4 chambered with one ovule each; style slender ending in a bifid stigma. Fruits are drupe and obovoid in shape, 1.8-2.5 cm long, pericarp leathery, shining yellow outside when dry; endocarp bony, embedded in an aromatic sweetish pulp. Seeds are 1 or 2, hard and oblong ex-albuminous. The panicles of flowers appear from February to April.

Distribution

Though it is a native of Asia, it has extensively been planted in tropical areas of Africa, Asia, Australia, America, West Indies, and on several islands in Pacific Ocean. In India, it is naturally distributed in Eastern SubHimalayan tract, Aravali Hills, Western Peninsula, Indo-Gangetic plains, Western Himalaya and Central India. It occurs naturally from 5° to 30°N longitude and between 50 to 1300 m elevations.

Morphological characteristics

It is an annual/perennial herb with prostrate spreading branches in all directions. The root system is deep. Leaflets are 2.5-5 cm long, elliptical, oblong and rounded at base. Leaves are densely clothed with white appressed and long spreading hairs. In nature, seedlings appear after 2-3 showers during July-August. Generally, the seedlings are abundant under the canopy of trees or shrubs. The young seedling grows straight and produces lateral branches during first week of August. The lateral branches spread in all directions. The flowering starts during first week of August. Fruit formation takes place in the last week of August, while flowering still continues. The dispersal of the seeds takes place from September to December. Plant dries during November-December.

Floral characteristics

Flowers are blue in colour and axillary in position. They are either solitary or in pairs on the long stalk. Styles are two and each is bifid. Fruit is globose with four-valved capsule containing dark brown to black smooth seeds. The flower colour varies from dark purple to whitish-purple.

Distribution

Plant is commonly found growing in open and grassy places, almost throughout India, ascending upto 1500 meter in the Himalayas. It is cultivated also in the sub-tropical parts of India, ascending upto 1800 meter elevation.

The genus Dioscorea comprises of approximately 600 species and sustains livelihood around the globe. Air yam, aerial yam, bitter yam, cheeky yam, potato yam, and parsnip yam are all names for Dioscorea bulbifera L., a traditional medicinal plant native to Asia, Northern Australia, America, and tropical Africa. It’s been used in traditional medicine for a long time and has a lot of potential.

Morphological characteristics

It is a perennial herbaceous climber that can reach a height of 10-20 metres and has multiple fibrous roots. The leaves are alternating, broadly cordate, and bright green in colour, with rounded basal lobes arising from one of them. Aerial tubers (bulbils) are circular, smooth-surfaced tubers that grow freely in leaf axils. Annual stems emerge from a tuberous, woody rootstock. These stems either creep along the ground or climb up the surrounding vegetation. Dioscoreaceae subfamilies are distinguished by the presence of bisexual and unisexual blooms. Seeds are trilocular, dark brown, and somewhat winged (1.2-1.6 by 0.5 cm).

Floral characteristics

Flowers are grouped in spikes that are hanging, axillary, solitary, or fascicled. The seeds are winged at the base, while the capsules are oblong and winged. The fruit has three valves and the perianth is tubular. From September to November, the plant blooms and bears fruit.

Morphological characteristics

Plant is terrestrial glabrous herb attends height of 20-25 cm. Tubers slightly flatten ed, palmately divided into 3-5, finger like lobes. Flower stalk upto 90 cm Long, erect, hollow, leafy throughout or the lower portion bear few sheathing scales. Leaves are 4-6, cauline, leaf blade oblong to linear lanceolate, 8.0-15.0cm x 1.5-3.0 cm in size, base sheathing, apex obtuse or acuminate.

Floral characteristics

Inflorescence is raceme, 5.0-15.0 cm long, crowded with many flowers. Flowers are purple and the bracts green, narrowly lance shaped, lower bract longer than the flowers, upper slightly shorter. Flowers are about 1.8 cm long, including the curved spur. Sepals and petals are nearly equal. Three of them form a hood and the two sides spread outwards. The lip is rounded and shallowly 3-lobed, spotted dark purple. Spur straight, cylindrical, nearly as long as the ovary; column very short; anther adnate to its face, cells diverging; pollinia 2, caudicles attached to 2 small globose, viscid glands enclosed in a minute pouch overhanging the broad, 2-lobed stigma.

Distribution

This attractive terrestrial orchid grows in damp pastures of Himalayas from Kashmir to Nepal at the altitude of 2500-5000 m MSL.

Curcuma zedoaria (zedoary or white turmeric) is a perennial herb and member of the genus Curcuma, family Zingiberaceae. The plant is native to South Asia and Southeast Asia but is now naturalized in other places including the US state of Florida. Zedoary was one of the ancient food plants of the Austronesian peoples. They were spread during prehistoric times to the Pacific Islands and Madagascar during the Austronesian expansion. Its use as a spice in the West today is extremely rare, having been replaced by ginger, and to a lesser extent, yellow turmeric. Curcuma Zedoaria (Berg.) Rosc.syn. C. zerumbet Roxb; Amomum zedoaria Christm., the Kasthurimanjal of commerce, is also known as Round zedoary in English, Kachura in Sanskrit and Kakhur in Hindi.

Morphological characteristics

Zedoary is a rhizomatous annual or biennial herb with a long, scented stem. It stands at 1.8 metres tall. On the inside, the rhizomes are large and pale yellow or yellowish. The roots are fragrant, and the tubers are ellipsoid in shape. With the exception of a bitter aftertaste, the edible root of the zedoary has a white interior and a mango-like scent; however, its flavour is more similar to ginger. Although there is no obvious aerial stem, the shoot has a pseudo stem made up of four to six long and densely overlapping sheathing leaf bases. The leaves are enormous, up to 1 m long, rectangular and strongly veined, and frequently violet in colour in the centre.