eChapters

Introduction

Any kind of garden established on the roof top of building is known as roof garden, which provides the opportunity to cultivate the quality vegetables, fruits and flowers in home. In this system plants and grasses are grown on a nutrition medium placed above a waterproof membrane. Roof gardening is mostly adopted in urban areas. It uses for decorative benefit, roof plantings make available food, manage temperature, hydrological remuneration, architectural improvement, habitats  for wildlife, frivolous opportunities, and in large scale it may even have ecological benefits (Louise, 2009). This considerably increases human health as adding organic cultivation.

Abstract

Mango (Mangifera indica L.) is the one of the most important fruit crop of tropics and subtropics. Mango belong to group of plant in which there is an antagonism between vegetative vigour and flowering intensity. Therefore, any factor that reduces vegetative vigour without altering the metabolic activity and favors flowering which can be possible by the use of growth regulator. Growth retardant that has been widely used in mango crop is paclobutrazol (PBZ) or cultar. Paclobutrazol is N-containing heterocyclic, trizole compound which stimulate flowering by inhibiting gibberellic acid pathway by inhibiting oxidation of ent-kaurene to ent-kaurenoic acid by blocking cytochrome P450 dependent monooxygenase enzyme. It is applied at the rate 2-5g/m of canopy diameter 3-4 months prior to desired date of flowering either by foliar spray, soil drench or trunk application. However, soil application is found more efficient on mango quality production than other. Paclobutrazol has pleiotropic response on mango cultivars. It has been found that application of paclobutrazol is effective in enhancing the protein mobilisation, starch, carotenoid, lycopene, phenol and cytokinin, abscisic acid and enzyme content in treated plant that induce flowering. It has been found that paclobutrazol is capable to reduce mango malformation and make plant tolerant in stress condition.

Abstract

In the recent past we have seen a great upsurge in the production and productivity of food grains as well as horticultural produce which is sufficient to feed our burgeoning population. This way we are self-sufficient to feed our population, but now the major challenge before us is to ensure the nutritional security of each and every individual of the country. Moreover, meeting nutritional security through conventional or molecular breeding demands long time. However, this could be achieved in much shorter period of time i.e., within 2-3 weeks by growing microgreens.Microgreens can be easily characterised by having a central stem with two fully developed cotyledon leaves and mostly one pair of small true leaves.In comparison to their mature counterparts, microgreens of a variety of vegetables and herbs have been reported to be more nutritious. They are rich in ascorbic acids, carotenoids, phylloquinone and tocopherols, which is responsible for its antioxidant properties and also plays a vital role in weight gain modulation, cholesterol metabolism. It may also protects from cardiovascular diseases by preventing hypercholesterolemia. Main problem associated with microgreens are their high price and high perishability and lack of awareness among people about its cultivation practices and health benefits. It demands great attention from the scientific community, to address these problems and make it available in each and every household to ensure the nutritional security of the nation.

Introduction

Fresh fruits and vegetables are known for their nutritional and relishing nature. But, their fast perishability and season wise availability make them unavailable for a longer time. To enjoy and get benefited from their unique taste and nutritional value they are further preserved or converted into some value-added products such as jam, jelly, candies, juices, minimally processed fresh-cut fruits and vegetables, pickles etc. There are techniques which are developed to preserve them while in fresh and also when they are made into value-added products. Some require only one technique and other requires more than one in combination so that the product can be preserved for a longer period and available to maximum population even after their period of production/availability is completed.

Introduction

In India, Fruits and vegetables comprises nearly 90% of the total horticulture production. India is now the second largest producer of fruits and vegetables in the world and leader in several horticultural crops, namely mango, banana, papaya, cashewnut, arecanut, potato, and okra (National Horticulture Board, 2015). The total area occupied by horticultural crops in India was 23.69  million ha and total production was 283 million tonnes in 2015-16 (Source: Ministry of Agriculture and Farmers’ Welfare). Different horticultural crops like fruits, vegetables, spices, medicinal plants and plantation crops comprises a large chunk of the total crop sales value of the country and also secures nutritional security of the persons of the country. For systematic and efficient management of existing crops and to bring more area of the country under the cultivation of horticultural crops to increase overall horticultural production in term of time and area, a database must be created for decision making and planning. 

Introduction

Sensors are the key components for enabling any IoT(Internet of Things) application. The concept of IoT came as early as 1990 but the practical implementations of the IoT technology is actually becoming possible as the cost of the devices that are needed to create any IoT application have reduced. Sensors are one of the major hardware components needed to form IoT systems and decrease in its price has given a forward leap in developing IoT applications. Sensors have to be uniquely identifiable devices with a unique device ip address so that they can be easily identifiable over a large network. These have to be active in nature which means that they should be able to collect real time data. These can either work on their own (autonomous in nature) or can be made to work by the user depending on their needs (user controlled).

Abstract

The development of nano technology creates an excellent opportunity to address complex technical  issues of food supply chain. Failure to embrace nano technology will deny the horticultural sector an opportunity to capitalize on improved product visibility, food safety, quality and security and associated economic benefits. Agricultural and food supply chain management is complex due to the diverse characteristics of agricultural products. There are numerous types of horticultural crops and products, many of which are perishable. In addition, the degree of standardization of some kinds of fruit products and their management is still low. In this regard, the potential application of nano technology to the horticulture is reviewed. Investigation confirms that incremental applicationof nano technology in the horticulture,

Water is the most critical component of life system. Irrigation plays vital role in rising and stabilizing yield and maintaining quality of fruit crops grown in tropical or sub-tropical climate. Micro irrigation is one of the modern and advanced methods of irrigation which is becoming popular in areas having problems like water scarcity and poor quality of water. Since the competition for water between agricultural and non-agricultural sector is increasing day by day, the efficient management of water resources is very essential to meet the water requirement. It is anticipated to reduce water use for agriculture by 70% in the coming decade, where the present day share is 80%. Demand for water is increasing in non-agricultural sectors like industry, energy, domestic use etc. Hence, policy makers and researchers consider water as the main obstacle for growing enough food crops in the coming years. In India where population is increasing at alarming rate, the area under irrigation should go up from 60 million hectares to 114 million hectares by the year 2050. In this context, micro irrigation plays a major role under limiter water agro ecosystem.

Bakery Industry

Baked goods have been around for thousands of years. The art of baking was developed early during the Roman Empire. It was a highly famous art as Roman citizens loved baked goods and demanded for them frequently for important occasions such as feasts and weddings etc. Due to the fame and desire that the art of baking received, around 300 BC, baking was introduced as an occupation and respectable profession for Romans. The bakers began to prepare bread at home in an oven, using mills to grind grain into the flour for their breads. The oncoming demand for baked goods vigorously continued and the first bakers’ guild was established in 168 BC in Rome. This drastic appeal for baked goods promoted baking all throughout Europe and expanded into the eastern parts of Asia. Bakers started baking breads and goods at home and selling them out on the streets.

This trend became common and soon, baked products were getting sold in streets of Rome, Germany, London and many more. This resulted in a system of delivering the goods to households, as the demand for baked breads and goods significantly increased. This provoked the bakers to establish a place where people could purchase baked goods for themselves. Therefore, in Paris, the first open-air bakery of baked goods was developed and since then, bakeries became a common place to purchase delicious goods and get together around the world. By the colonial era, bakeries were commonly viewed as places to gather and socialize.^[2] World War II directly affected bread industries in the UK. Baking schools closed during this time so when the war did eventually end there was an absence of skilled bakers. This resulted in new methods being developed to satisfy the world’s desire for bread. Methods like: adding chemicals to dough, premixes and specialized machinery. Unfortunately these old methods of baking were almost completely eradicated when these new methods were introduced and became industrialized. The old methods were seen as unnecessary and financially unsound, during this period there were not many traditional bakeries left.

Bakery is a traditional activity and occupies an important place in food processing industry. The bakery manufacturers in India can be differentiated into the three broad segments of bread, biscuits and cake. About 1.3 million tonnes of the bakery products industry in India is in the organized sector out of 3 millions tonnes, while the balance comprises of unorganized, small-scale local manufacturers. Though, there are sufficient automatic and semi-automatic bread as well as biscuit manufacturing units in India but there are still number of people prefer fresh bread and other products from the local bakery. After entry of Pizza and Burgers’ MNCs in the country, people are changing their tastes also. Today, they are not restricted to bread, cake and biscuits but to other bakery products also. The consumers are increasingly going for newer options with respect to bakery products. With the ventures of few Companies like Britannia, Biskfarm, and Morish etc. competition has increased. Also, the Indian market is witnessing the proliferation of bakery cafe chains in the form of Baristacafe, coffee day, Café Coffee & Monginis etc.

Armed with better technology, know-how and novel ideas, these foreign companies have made rapid inroads into the lucrative market within a very short span of time. Though the demand for bakery products in India has always been on the rise, there is clearly a lack of awareness and the will to break new ground, which has helped global players to gain brownie points while exploring the market in India. The unorganized sector accounts for about half of the total biscuit production estimated at 1.5 million tonnes. It also accounts for 85 per cent of the total bread production and around 90 per cent of the other bakery products estimated at 0.6 million tonnes. The last includes pastries, cakes, buns, rusks and others.

Various types of equipment are needed and used to facilitate the process of baking. Depending upon the use, equipment may be as light equipment and heavy equipment.

Chocolate is a key ingredient in many foods such as milk shakes, candy bars, cookies and cereals. It is ranked as one of the most favourite flavours in North America and Europe. Despite its popularity, most people do not know the unique or igins of this popular treat. Chocolate is a product that requires complex procedures to produce. The process involves harvesting coca, refining coca to cocoa beans, and shipping the cocoa beans to the manufacturing factory for cleaning, conching and grinding. These cocoa beans will then be imported or exported to other countries and be transformed into different type of chocolate products.

In history, 1828 marked the “modern era” of chocolate making when Dutch chocolate maker Conrad J. van Houten patented an inexpensive method for pressing the fat from roasted cacao beans along with other processes to create a fine powder known as “cocoa”. The powder was then treated with alkaline salt that helped the powder mix with water easily. The creation of powdered chocolate made it easier to mix with water, sugar and a possible combination of other ingredients to make chocolate in solid form. Many other chocolate makers began to build on Van Houten’s success to make a variety of chocolate products. In 1894, English chocolate maker Joseph Storrs Fry produced what was arguably the world’s first eating chocolate”

Chemically, sugar candies are broadly divided into two groups: crystalline candies and amorphous or non crystallized candies. Crystalline candies are not as hard as crystals of the mineral variety, but derive their name and their texture from their microscopically organized sugar structure, formed through a process of crystallization, which makes them easy to bite or cut into. Fudge, creams, and fondant are examples of crystalline candies. Amorphous candies have a disorganized crystalline structure. They usually have higher sugar concentrations, and the texture may be chewy, hard, or brittle. Hard candies, such as lollipops, caramels, nut brittles and toffees are all examples of amorphous candies, even though some of them are as hard as rocks and resemble crystals in their overall appearance. Crystalline candies are chemically described as having two phases, because the tiny, solid sugar crystals are suspended in a thick liquid solution. These are also called grained candies, because they can have a grainy texture. Amorphous candies are have only one phase, which is either solid or liquid, and do not have a grainy texture, so they may be called ungrained.

Commercially, candies are often divided into three groups, according to the amount of sugar they contain:

Poultry meat and eggs have high nutritive value. Egg is used as a standard for measuring the quality of other food proteins. It is a well balanced source of nutrients. Similarly poultry meat is easily digestible, high in protein and low in fat content. It contains all the essential amino acids. Though the poultry meat and egg production have tremendously increased in India during last few decades however due to lack of organized marketing channels poultry producers are not getting reasonable returns. Indian broiler and egg markets are in a disorganized state. In last few decades various efforts have been made so as to organize and co-ordinate marketing channel of poultry meat and eggs. Through these efforts producers are also benefited but only in some particular areas. Therefore, there is need to expand it further covering the country.

What is Marketing?

Marketing may be defined as exchange of a produce for an agreed sum of money. It is a commercial process involved in promoting, selling and distributing a product. In simple words marketing is finding out what customers want and supplying it at a profit. Marketing is a business in terms of customer needs and their satisfaction. As per P. Taylor, marketing is not simply providing products or services; it is essentially about providing changing benefits to the changing needs and demands of the customer.

Organic Farming

The FAO/WHO Codex Alimentarius Commission defines organic farming as “a unique production management system which promotes and enhances agro- ecosystem health, including biodiversity, biological cycles and soil biological activity, and this is accomplished by using on-farm agronomic, biological and mechanical methods in exclusion of all synthetic off-farm inputs”. It is a certification of a production system as opposed to the certification of a product. For a product to be certified organic, all operators in the product chain, including farmers, processors, manufacturers, exporters, importers, wholesalers and retailers must be certified organic. The establishment of organic animal/poultry husbandry requires a specific period called as “conversion period”. This period is the time taken between the start of the organic management on farm and certification of livestock farm and its product. Changing from conventional to organic management system for livestock enterprises requires a careful and gradual approach. It is learnt that global organic product has increased 20% annually over the past 10 years. Though Australia, European Union and USA are leading organic producers, a recent study indicated that developing countries including India are also adopting the system and marching ahead.

Conservation Biology emerged as the scientific study of the nature and status of Earth’s biodiversity with the aim of protecting species, their habitats, and ecosystems from excessive rates of extinction. Biodiversity itself has a wider meaning unifying and taking into account species, within species breeds/ varieties, ecosystem, genetic and molecular diversity.

Need for Conservation

The progenitor of modern-day chicken has been the Red Jungle Fowl and over the years breeds have been developed slowly for commercial purpose as layers and broilers. However we still have lot of indigenous birds which cannot be defined in either category.

Breeding capabilities Vs biodiversity erosion: Presently only about 3-4 poultry breeding companies provide meat stocks for farms around the world. A similar number of companies supply birds for commercial egg production. As a result modern animal industry now uses only a few breeds of any species. Of the many breeds once commonly seen on farms, many have declined sharply in numbers and others have disappeared almost completely.

Productivity Vs Conservation: On one hand, to increase productivity we want certain natural characters to be eliminated and on the other we talk of conserving the indigenous varieties, which sounds contradictory.

Biosecurity means protection against infectious biological agents. These agents include bacteria, viruses, protozoa, fungi, parasites, and any other agents capable of introducing infectious diseases into a poultry flock. Biosecurity therefore means maintaining a flock, poultry house or premises in such a way that infectious agents do not have a chance to enter to cause diseases. The biosecurity may be categorized into three: Conceptual biosecurity, Structural biosecurity and operational Biosecurity.

Importance of Biosecurity

In modern poultry production, birds are reared under intensive system where large numbers are concentrated in small area. As a result, when an infectious agent enters a poultry house, there is probability for widespread dissemination if it is not contained. Besides, the broiler and egg industry of today is under increasing consumer and regulatory pressures to guarantee food safety and meet export requirements. As a result, broiler and layer operations around the world require the supply of breeding stock free of salmonellas specific to avian species (such as S. pullorum and S. gallinarum) and those that could cause outbreaks of human food-borne illness. Inadequate biosecurity can contribute to wide epidemics of highly pathogenic or exotic diseases. An infection by a virulent organism within a facility can be devastating, reducing without overt signs of disease. Once contaminated with pathogens, poultry facilities are extremely difficult and expensive to clean, sanitize and disinfect. Prevention of disease is always less expensive than treatment. The cost of implementing biosecurity system is smaller when compared to financial profit that can be made from production. Good biosecurity is therefore vital requirement in the best possible control of disease.

1    Bovines

2    Canines

1    Ideal surgical pack

2    Nerve blocks

3    Commonly used pre-anaesthetics and anaesthetics

Infertility or reduced fertility in male animals particularly in bulls had considered being a rare occurrence, but now infertility in males is being considered a common and severe problem. Still there is lack of information concerning the male’s infertility.

Miscellaneous causes of male infertility 

1. Failure of proper delivery of semen into the vagina

It may be secondary to lacerations of the ventral caudal portions of the glans penis with a fistulous opening of the urethra ventrally. In such case, at the time of ejaculation, neither semen is deposited in the middle portion of the vagina nor sprayed over the cervix. In addition, it is observed in rams following necrosis of most of the urethral process secondary to urinary calculi or lacerations or injury.

Semen collection in bulls and buffalo bulls

Semen collection from domestic animals is an art and skilled job to get maximum quantity and quality of an ejaculate. Ejaculation of semen in a male is a complex process and consists of several events sexual arousal, courtship, erection, penile protrusion, mounting, intromission, ejaculation, orgasm like reaction and dismounting. Ejaculation is the result of neuro-muscular stimulation that starts in the vas differentia and accessory sex glands. The semen ejaculation is finally brought about by the rhythmical contractions of penile musculature and urethra. The muscular contractions proceed progressively in waves, forcing the semen out of the external urethral orifice. To get good quality semen, the bulls must undergo all the related events of ejaculation. The semen collectors should have knowledge of inhibitory and stimulatory factors for the act of ejaculation in male domestic animals. The stimulatory factors are:

Microscopic examination 

A phase contract microscope with biotherm (37o C) is necessary for correct evaluation of semen because the refractive index of spermatozoa differs slightly from that of the surrounding medium. The ordinary bright field microscope will not provide sufficient contrast between the spermatozoa and the medium. Under phase contrast microscope, the object will appear dark on a bright background. This is achieved by reducing the light passing through the object by half a wavelength compared to the light passing through the medium. The eyepiece has a magnifying capacity of 10X while the objectives have 10, 40 and 100X. This will provide the microscope the magnifications of 100, 400 and 1000. The lenses and eyepiece should be kept clean by wiping with tissue paper and distilled water. Xylol can also be used to remove greasy material. The microscope has to be kept in one place and covered with Perspex cover when not in use to avoid dust accumulation. Personnel familiar with the operation of a particular microscope alone should be allowed to handle the microscope, since lot of differences exist between different makes of microscopes. 

1.1     Prokaryotic 
    
1.2     Eukaryotic
    
1.3     Cell orgenellie

4.1 DNA: The word means
    
4.2 Double Helical Structure: The Watson and Crick Model
    
4.3 Family of DNA 
    
4.4 The Chromosomes

9.1 Methylases
    
9.2 Polymerases
    
9.3 Nucleases
    
9.4 Ligases
    
9.5 Phosphatase
    
9.6 Topoisomerase
    
9.7 Restriction enzymes

7.1    Drip Network
    
7.2    Performance of the Drip System
        
Questions and Problems
        
References

The aim of this book is to further strengthen the knowledge of readers on management of disasters so that they are better prepared to cope with more frequently occurring natural and manmade disasters.

The process that helps us to face disasters effectively is commonly known as disaster preparedness.  When a disaster strikes, it affects us directly and immediately. While as the government, international agencies such as United Nations, Red Cross Society, non government organizations, like Ramakrishna Mission, OXFAM, CARE, resident welfare associations in urban areas and panchayats in rural areas assist us when faced with disasters the community, invariably remains the first responders. Hence, the individuals as a part of community should prepare adequately to prevent, face and respond to disasters effectively. History has  shown that where communities have prepared adequately to confront disasters, losses to life and property have been less and environment could be protected. People living in an area may be prone to more than one type of disaster. For example Kutch District of Gujarat is vulnerable to floods, drought, cyclones and to earthquakes. Such an area is called ‘multiple hazard’ zone.

Introduction

Drought is temporary reduction in water or moisture availability significantly below the normal or expected amount for a specific period. This condition occurs either due to inadequacy of rainfall or lack of irrigation facilities, unexploitation or deficient availability for meeting the normal crop requirement in the context of the agro-climatic conditions prevailing in any particular area. This has been scientifically computed as Moisture Index (MI). Drought in this context can be defined as adverse MI or adverse water balance which may be attributable not only to a prolonged dry spell due to lack or sufficient rainfall but also due to such other factors as excessive evapo-transpiration losses, high temperature, low soil holding etc.

1.    Panama wilt
        
2.    Moko or Bacterial wilt
        
3.    Sigatoka disease
        
4.    Anthracnose
        
5.    Bunchy Top

1.    Scab
        
2.    Powdery mildew
        
3.    Fire blight
        
4.    Soft rot
        
5.    Bitter rot

1.    Downy mildew
        
2.    Powdery mildew
        
3.    Rust
        
4.    Wilt

Abstract

Agriculture is the backbone of India’s economic development and has experienced immense growth in the past few decades. Agriculture not only involves the participation of male workers but also experiences active participation of all family members, as well. Women, as part of the family, take up agricultural activities as an extension to their household chores. The Government and voluntary agencies have also recognised the need for women in the farming community to become self-reliant and active participants in the agricultural sector. Increasing awareness and educating themselves with the passage of time, farmers have made themselves aware of new techniques of farming and growing and established themselves as agricultural entrepreneurs in the long run. Many initiatives supporting women entrepreneurs and creating a supportive ecosystem for women to become agricultural entrepreneurs have been initiated by the state. The case of Anita Devi popularly known as the Mushroom Lady of Bihar has been taken up in this paper to substantiate with evidence how government initiatives have helped her gain success and grow as an agricultural entrepreneur. This study aims at disseminating how such initiatives help in creating an ecosystem that motivates agricultural entrepreneurs in general and women in particular.

Abstract

India is the second largest food producing country in the world. Food processing is one of the key industries in the country and a sector that has direct linkage between agriculture and industry. Being the second largest producer of fruits and vegetables along with its strategic geographic location and proximity to food importing nations, India is in an advantageous position in terms of exporting processed food. As per estimates, Indian food processing sector stood at USD258 billion in the financial year 2015. The growth and development of this industry have direct impact on the Indian economy. The aim of the present study is to discuss about the growth of the food processing industry, analyse its strengths and weaknesses and generate possibilities of entrepreneurial development towards the expansion of the sector. This study has been a secondary data analysis based on data collected from journals, magazines, web searches and reports from various government and private agencies.

The study has identified the main drivers aiding to the growth of the sector. It includes strong domestic demand, rising export opportunities; supply side advantages for exporters due to rising global demand and strong policy support from the Government. On the other hand, fragmented market, infrastructure support, namely cold chain, innovation and skill development are the major hurdles that have to be overcome. This article makes an attempt to explore entrepreneurial opportunities and few areas where new business could be initiated. The entrepreneurial opportunities highlighted in this paper are based on Drucker’s opportunity construct that entrepreneurs have an eye more for possibilities created by change than the problems.

Insects, belonging to the phyllum-arthropoda, have an open circulatory system. An open circulatory system is that in which blood bathes the organs rather internal organs directly in the haemocoel, the coelom of the insects, which actually is not a true coelom. Almost entire haemocoel of insects is formed from the epineural sinus. The haemocoel is divided into the perineural sinus and perivisceral sinus by the dorsal and ventral diaphragm respectively. The characteristic of insects is the presence of dorsal vessel, which comprises of anterior aorta and a posterior heart and is the only conducting tube present in insects. The blood of insects mostly does not perform gaseous exchange, therefore it does not contain haemoglobin, and blood in insects is called the haemolymph, which is red-coloured. So in order to study the circulatory system of insects, the major focus must be on the dorsal vessel, which has been described as follows, along with its accessory structures.

The respiratory system or tracheal system is involved in gaseous exchange in the insect with the environment. In this system there is a system of internal tubes, the tracheae that directly transport the oxygen to the parts of the body. Therefore, it does not use the circulatory system as the vehicle for gaseous exchange. The trachae open outside through segmental pores called spiracles having some system of closing and opening. Except proturans and some collembolans all insects possess tracheal system for respiration. These insects live in moist habitats where gaseous exchange takes place directly with the environment via the integument.

Exocrine Glands Types: Exocrine glands are generally of ectodermal origin and are widely scattered over the insect. Exocrine glands release their secreations through ducts into the lumen of various internal organs. Example: Accessory reproductive glands, salivary gland, silk gland. Gland is mainly composed of secretory epithelial cells. These are simple unicellular, bicellular, multicellular, complex multicellular (compound glands). These glands are ectodermal in origin and are secreated over the insect body.

Examples. Wax glands, lac glands, cephalic glands, poison glands.

1. Glands pouring (secreting structural materials). Some insects secrete substances that are used in building their houses (beehive) as protecting them (lac or cocoon).

Abstract

Burkina Faso is a landlocked country in West Africa with a dry tropical climate characterised by a short rainy season and a long dry season. The annual rainfall varied between 300mm in the northern part of the country to 1200mm in the meridian part. Since many years, the degradation of climatic conditions is observed. Therefore, the annual rainfalls of the 1971-1981 period were inferior to those of the precedent periods, and also the deterioration of the climatic conditions led the limits of some ishoteques “isohyète” to move southward, more than 50km farther. Furthermore, the decennial rainfalls since 1920 were subjected to a latitudinal displacement to the south. For example the ishoteque “isohyète” 500mm which were located at the North of the 15°N outside Burkina Faso during the years 1950-1960 moved gradually year by year and reached the 14°N during the years 1970-1980 inside Burkina Faso.

Abstract

The area of study extends about 65 km from Gamasa City to Burg El-Burullus. The coastal sand dunes are very near to the shoreline in Baltim and El-Burg and far from the shoreline in Gamasa. It is narrow with relatively steep slope northward near Burg El-Burullus and Baltim, while it increases in width eastward to become wide with gentle slope near Gamasa. The coastal sand dunes are very mobile and move toward the agricultural lands, roads (international coastal road), resorts, and other developmental activities. The sand dunes in the study area are classified into two categories, the old fixed dunes and recent mobile dunes. The main directions of wind blow are N, W, and NW directions. It causes the movement of mobile dunes (Barchan and longitudinal). Several methods have been used for dune fixation like the tar spraying, wind fences and stones. Wind fences are not costly and nonpolluting if compared with stonewall and tar spraying, which prevent the land utilization for agricultural purposes.

Abstract

Before 1960’s, UAE was a poor developing country and almost there were no real signs of civilization. During the 1970’s two important things happened: H. H. Sheikh Zayed Bin Sultan Al Nahyan, the president of UAE, and the other Emirates rulers united together and established the United Arab Emirates and considerable oil findings were discovered. The UAE Leadership has proved to have deep future vision; in three decades the country jumped from a relatively backward scattered emirates to a well developed and civilized country.

Development is very obvious : from tents and sandy tracks to tower buildings and highways, from desert to green belts of palm trees and vegetables in all parts of the country, and most important, education, healthcare and all other services became the best in the region. Urban development was so sharp; someone who left the place 10 years ago can hardly know his location and services in all sectors became the best at the international level. The oil money was properly invested in development.

UAE Air Force Space Reconnaissance, used satellite and aerial images for the past 20 years and successfully utilized images from various sources including aerial photographs, Russian satellites images, SPOT and Landsat

Introduction

Environmental Assessment is taken up in this exercise as a rapid assessment technique for determining the current status of the environment and identifying impact of critical activities on environmental parameters. EIA is a relatively new planning and decision-making tool first enshrined in the United States in the National Environmental Policy Act of 1969. It is a formal study process used to predict the environmental consequences of any development project. EIA thus ensures that the potential problems are foreseen and addressed at an early stage in project planning and design. Creation of Environmental Impact Assessment (EIA) system is vital to conform socio-economic development projects to environmental safety and thereby ensure sustainable economic development. In view of the fact that development is an ever-growing process, its impact on the environment is also ever increasing, leading to rapid deterioration in environmental conditions. As such Environmental Assessment provides a rational approach to sustainable development.

It also enables us in carrying out Environmental Cost-Benefit Analysis of projects at an initial stage. It is thus a precursor to detailed analysis of environmental impacts, which are taken up only if a need for the same is established.

Introduction

Water is among the most precious gifts of nature to mankind. Most of the ancient towns of the world grew on the banks of the river, and some of the ancient civilizations are known by the names of rivers. Rivers have always been important sources of drinking water and the means of sustaining human, animal and plant life. Whenever one is dealing with water resources development and utilization, it has to be kept in mind that not only quantity of water but also quality of water is very important. The well being and development of our society is dependent on the availability of water. An increase in groundwater development and utilization for industries and urban water supply has created improper disposal of liquid waste. Defective well constructions, sewage and waste disposal in man made lakes with in the city, open quarries with water and failure to seal the abandoned wells in city area have provided possible openings for downward movement of polluted water into subsurface formations without undergoing the process of natural filtration.

Introduction

Reservoirs constitute the prime inland fishery resource in the country by virtue of their numerous production potential. These man-made ecosystems offer enough scope for stock manipulation through ecological maneuvering, paving the way for production hikes at a relatively low-capital investment. Unlike the aquaculture systems, where the development is capital intensive, a reservoir fishery development is labour productive and ensures employment for some of the weakest sections of our society.

John William Harshberger codified ethnobotany as ‘the study of plants used by primitive and aboriginal people ‘in a popular lecture on 4 December 1895. Later it was published in the Botanical Gazette in 1896 and now he is regarded as “Father of Ethnobotany”. Subsequently, Walter Fewkes (1896) adopted the word ethnobotany after Harshberger for the title of a research paper. Another term ‘Arboriginal Botany’ coined by Steven Powers (1873- 1875) was in use for about two decades before Harsh Berger. In brief, “Ethnobotany is the study of interrelations between primitive human cultures and the plants and animals in its environment, which is regarded as the branch of ethnobiology”. There are some other definitions of ethnobotany by various authors:

Jones (1941) defined as “Ethnobotany is the study of interrelationship between man and vegetation”.

Faulks (1958) considered it as “The total relationship between man and vegetation” in his book entitled “An Introduction to Ethnobotany” It was the first book specially published on ethnobotany. Schultes (1962) explained as “Ethnobotany is the study of relationships which exist between people of a primitive society and their plant environment”. Gadgil and Vartak (1976) considered it as “Branch of economic botany which deals with the role of plants in life and culture of arboriginals and tribal people”. Alcorn (1984) states “It is the study of contextualized plant use”. Wickens (1990) defined ethnobotany as “The study of useful plants prior to their commercial exploitation and eventual domestication”. According to Ford 1994, ethnobotany is concerned with a wide range of interest of plants in cultural and ecological context as men in his edited book “The Nature and Status of Ethnobotany”. According to Martin 1995, ethnobotany is the part of ethnoecology, which concerns plants. Turner 1996 was given the appropriate definition “the science of people’s interaction with plants”. In context of Indian ethnobotany the first book published by Jain, S.K., 1981 entitled “Glimpses of Indian Ethnobotany” and Dr. Jain (2001) defined ethnobotany as “It deals with the study of total natural and traditional interrelationship between man and plants and his environment”.

In the starting of twentieth century, the ethnobotany progressed from the untested compilation of knowledge to a bigger method and abstract reorientation. Nowadays, the ethnobotany practices need a spread of skills such as:

• Training on the identification and preservation of plant specimens
• Training on linguistic and sociology to understand local language and their family structure
• Training on the psychology and cultural or traditional about plants
• Training on pharmecology and medicobotany

Ethnobotanists interact in a very broad array of analysis queries and practices, that don’t lend themselves to straightforward categorization. However, the subsequent headings arrange to describe a number of the key areas of recent ethnobotanical study.

Nanomaterials are a field which takes a materials science-based approach to nanotechnology. It studies materials with morphological features on the nanoscale, and especially those which have special properties stemming from their nanoscale dimensions. Nanoscale is usually defined as smaller than a one tenth of a micrometer in at least one dimension, though this term is sometimes also used for materials smaller than one micrometer.

An aspect of nanotechnology is the vastly increased ratio of surface area to volume present in many nanoscale materials which makes possible new quantum mechanical effects, for example the “quantum size effect” where the electronic properties of solids are altered with great reductions in particle size. This effect does not come into play by going from macro to micro dimensions. However, it becomes pronounced when the nanometer size range is reached. A certain number of physical properties also alter with the change from macroscopic systems. Novel mechanical properties of nanomaterials are a subject of nanomechanics research. Catalytic activities also reveal new behaviour in the interaction with biomaterials.

Polymeric nanoparticles are nanoparticles which are prepared from polymers. The drug is dissolved, entrapped, encapsulated or attached to nanoparticles and depending upon the method of preparation, nanoparticles, nanospheres or nanocapsules can be obtained. Nanocapsules are vesicular systems in which the drug is confined to a cavity surrounded by a polymer membrane, while nanospheres are matrix systems in which the drug is physically and uniformly dispersed.

In recent years, biodegradable polymeric nanoparticles have attracted considerable attention as potential drug delivery devices in view of their applications in drug targeting to particular organs/tissues, as carriers of DNA in gene therapy, and in their ability to deliver proteins, peptides and genes through oral route of administration.

In spite of development of various synthetic and semi synthetic polymers, natural polymers still enjoy their popularity in drug delivery, some of them are: gums (Eg. Acacia, Guar, etc.,) chitosan, gelatin, sodium alginate, and albumin. A range of materials have been employed to delivery of bioactive agents. A polymer used in controlled drug delivery formulation, must be chemically inert, non-toxic and free of leachable impurities. It must also have an appropriate physical structure, with minimal undesired aging, and be readily processable. Some of the polymeric materials are: cellulosics., poly(2-hydroxyethyl methacrylate), poly(N-vinyl pyrrolidone), poly(methyl methacrylate), poly(vinyl alcohol), poly(acrylic acid), polyacrylamide, poly(ethylene-co-vinyl acetate), poly(ethylene glycol), poly(methacrylic acid).

Nanomedicine is the medical application of nanotechnology. The approaches to nanomedicine range from the medical use of nanomaterials, to nanoelectronic biosensors, and even possible future applications of molecular nanotechnology. Current problems for nanomedicine involve understanding the issues related to toxicity and environmental impact of nanoscale materials.

Nanomedicine research is receiving funding from the US National Institute of Health. Of note is the funding in 2005 of a five-year plan to set up four nanomedicine centers. In April 2006, the journal Nature Materials estimated that130 nanotech-based drugsanddeliverysystems were being developed worldwide.

The impact of nanotechnology in the food industry has become more apparent over the last few years with the organization of various conferences dedicated to the topic, initiation of consortia for better and safefood, along with increased coveragein themedia. Several companies which were hesitant about revealing their research programmes in nanofood, have now gone public announcing plans to improve existing products and develop new ones to maintain market dominance. The typesof application include:smartpackaging, on demand preservatives, and interactive foods. Building on the concept of “on-demand” food, the idea of interactive food is to allow consumers to modify food depending on their own nutritional needs or tastes. The concept is that thousands of nanocapsules containing flavour or colour enhancers, or added nutritional elements (such as vitamins), would remain dormant in the food and only be released when triggered by the consumer.24 Most of the food giants including Nestle, Kraft, Heinz, and Unilever supportspecific research programmes tocapturea share of the nanofood market in the next decade.

The definition of nanofood is that nanotechnology techniques or tools are used during cultivation, production, processing, or packaging of the food. It does not mean atomically modified foodor foodproduced by nanomachines. Although there are ambitious thoughts of creating molecularfood using nanomachines, this is unrealistic in the foreseeable future. Instead nanotechnologists are moreoptimisticabout thepotential to changethe existing systemof food processingand to ensure the safety of food products, creating a healthy food culture. They are also hopeful of enhancing the nutritional quality of food through selected additives and improvements to the way the body digests and absorbs food. Although some of these goals are further away, the food packaging industry already incorporates nanotechnology in products.

In most countries, extension systems have now been operating for some time and problems within them will often require a refinement of the existing system rather than design of a new system from scratch.

The purpose of this chapter is to provide extension managers with a simple approach in analysing common extension problems. In most cases, suggestions are given for possible actions to consider in investigating the causes of the problem further and ultimately in overcoming it. However the primary purpose of the chapter is not ‘to give solutions to all known problems’ but to assist the extension manager in analysing problems to find their root cause (or causes). The chapter is designed to be simple and easy to use, and thus cannot do justice to the complexity of all the problems and situations faced by extension personnel.

Many different approaches might be used to organise this process and information. The chapter has tried in all cases to begin with noticeable problems and by analysing these through an hierarchy or problem tree, help users to analyse and reach their own conclusions as to the best solution.

Introduction

Good quality seed plays an important and crucial role in deciding the performance of any crop. Availability of quality seed is one of the important factors for increasing the production and productivity of agriculture. Seed is the cheapest and most efficient input as compared to other inputs like fertilizer, pesticides, water etc. Timely availability of quality seed of the right variety/ hybrid in adequate quantity decides the strength and health of agricultural economy.

Seed has been defined in many ways. Botanically, seed is defined as “a mature fertile ovule”. Seed is also defined as “an embryo, a living organism, embedded in the supporting or food storage tissue surrounded by seed coat”. Seed is also defined as “any plant part (cuttings, corms, bulbs, rhizomes etc.) used for growing commercial crops”.

Seed a basic input in Agriculture, a carrier of new technology, a basic tool for secured food supply. Seed is a principal means to secure crop yield in less favorable production areas. Seed is an important medium for rapid rehabilitation of agriculture in cases of natural disaster.