eChapters

Many types of geological hazards namely, tsunami, earthquakes, tsunami, floods and drought affect coastal areas like any other place on the Earth. As coastal regions are thickly populated and have abundant urban, industrial and recreational establishments, impacts of geohazards are always severe along coastal regions. Compliance to coastal zone regulations, with protection of sanddunesandmangroveswillbe the best mechanism to minimizethe damages from such hazards. In future, climate change may result in more hazards such as erratic rainfall and increase the frequency of droughts, floods and storm surges, etc. In this context, proposed coastal management zone for the coastal protection, disaster mitigation and management tools in coastal areas are examined in this chapter. It is suggested that extensive use of GIS and development of Geodatabase for the risk prone areas will serve as efficient tool for planners and policy makers to deal with geological hazards. In addition, it is felt that more efforts are needed in legal and institutional framework for integrated disaster management planning on local as well as national level.

INTRODUCTION

Geologic hazards are natural geological processes that inflict severe damage in areas of their operation if the area is utilized by anthropogenic activity in terms of habitation, industrial, recreational or commercial establishments. Many a times, natural geological processes that operated uninhibited for millions of years turn into geological hazards due to human intervention. These losses – lives and economic are not evenly distributed and are more prevalent in the developing countries due to higher population concentration and low level of economic growth. United Nations had realized the need of reducing these losses due to natural disasters and declared the last decade (1991-2000) as the International Decade for Natural Disaster Reduction. Objective of this proclamation was to reduce, through concerted efforts, the loss of life, property damage and socio-economic disruption caused by the natural disasters particularly in the developing countries (Tewar, 2000).

3.1 Introduction

Crystallography is the science of crystals. The term crystal is derived from the Greek word “Crystallos” which means “ice”. The term was used for colorless quartz which was believed to be “fossilized” ice. Crystals are bodies bounded by flat surface, arranged on a definite plan which is an expression of the internal arrangement of the atoms. They are formed by consolidation of magma which is also considered as crystallization.

3.2 Terms in Use to Describe a "Crystal"

3.2.1 Faces

Faces are the plane surface in a crystal. The common faces are usually parallel to net planes containing the greatest number of lattice points or ions. Wide spacing between the net planes leads to development of faces in these planes. Faces are two types like and unlike faces.

Abstract

The drainage pattern and the architecture are the reflections of not only the tectono fabric of a region, but also the active tectonic processes. From amongst many drainage patterns and anomalies, the eyed drainages, deflected drainages and the compressed meanders interpreted from satellite images for Pudukkottai region of Southern Tamil Nadu infer to reflect the active N-S block faults and NE-SW sinistral and NW-SE dextral faults related to post collision tectonic phenomena.

Introduction

The Geoscientists have long back recognized that the drainages are the reflections of the surface and subsurface lithology, structure and tectano fabric and also the active tectonic movements especially of the Quaternary period (Thornbury, 1985). Hence, the Geoscientists have all along been showing greater interest in mapping the drainage patterns. However, the mapping of the drainage patterns and detection of tectonic features there from have gained greater momentum only after the advent of modern Remote Sensing technology. Since the airborne and satellite borne spectral images have the credentials of showing the drainage pattern, the drainage anomalies and the tectonic features related to them all of which were studied in conjunction to bring out information on the geological history of the Quaternary period by many workers (Vaidyanadhan, 1971; Murthy and Sastri, 1981; Agarwal and Mitra, 1991; Ramasamy, 1991; Saravanavel and Ramasamy, 2014).

Goats are used primarily for milk and meat production, but their skin is also a valuable by- product. Goats are an important source of hides and skin . The term hide is used to denote the outer covering of large animals such as cows, buffaloes, horses ,sheep, camel etc. The term “Skin” is applied to that of smaller animals such as sheep, goats , calves etc. Raw hides and skins are used mainly for the manufacture of leather.Goat skin is in great demand for making leather gloves , shoes , luggage, book covers etc.Goat skin was also used in many of the musical instruments .Goat skin has been used since time immemorial as water-containers. The water containers from goat skin were called “Mushk” and the person carrying such containers as “Bhisti”.Pelt is undressed skin of sheep & goats. To prevent putrefication, the skin is treated as well as preserved by dry salting and are graded according to curled type quality of the skin.

The Leather Industry holds a prominent place in the Indian economy. India produces 13.14% of the goat skin production of the world.This sector is known for its consistency in high export earnings and it is among the top ten foreign exchange earners for the country. With an annual turnover of over US$ 7 billion, the export of leather and leather products increased manifold over the past decades and touched US$ 3.40 billion in 2009-10; recording a cumulative annual growth rate of about 5.43% (5 years).It is estimaed that 72.3 million goat skins were produced in India in 2008 (FAOSTAT). India ranks second among the goat skin producing countries of the world, second only to China. India produced 130 thousand tones of goat skin in 2008 ( FAOSTAT) against China producing 351.7 thousand tones and Pakistan 94 thousand tonnes (FAO Stat).

The major production centers for leather and leather products are located in Tamil Nadu - Chennai, Ambur, Ranipet, Vaniyambadi, Trichy, Dindigul ; West Bengal –Kolkata ; Uttar Pradesh –Kanpur, Agra & Noida ; Maharashtra –Mumbai; Punjab –Jallandhar ; Karnataka –Bangalore ; Andhra Pradesh - Hyderabad ; Haryana - Ambala, Gurgaon, Panchkula and Karnal; Delhi. India is the second largest producer of leather footwear and garments in the world.

Onion

Genetic Resources

In onion, much variation exists in bulb characteristics for size, shape, colour of skin and flesh, number of hearts, skin retention, firmness, pungency, TSS, yield etc. Bulbs may be white, red, brown or yellow, round, globe, flat or spindle shaped. Diversity is also found in field tolerance to Stemphyllium blight, purple blotch, basal rot and thrips. Various workers have also reported tolerance to soil salinity, reduced bolting, keeping quality and high dry matter content. In India, NBPGR, New Delhi, is a nodal agency engaged in collection, evaluation and maintenance of onion germplasms both from indigenous and exotic collections. Accessions numbering more than 1,000 onion germplasm lines are being maintained at NBPGR, New Delhi. Other centres maintaining sizeable number of germplasms are IIHR, Bangalore, Mahatma Phule Krishi Vidyapeeth, Rahuri, NHRDF also NRC on Onion and Garlic, Nasik; IARI, New Delhi, PAU, Ludhiana and IIVR, Varanasi. Indigenous collections account for more than 95% of the germplasm lines maintained in onion, which indicates the existence of large amount of variability within the country for short-day onions. However, it also indicates the necessity to enrich the existing germplasm pool by importing more exotic collections. Promising germplasms for different attributes are given in Table1.

4.1 Introduction

The objective of this chapter is to design a mobile app for agricultural field automation with Blynk app. Mobile app is designed to control the water management in field as per requirement. The complete system comprises of two sections sensor node and mobile app. Sensor node comprises of Node MCU, Power supply, LCD, Relay board, soil sensor and Ultrasonic sensor. The system is designed to establish control and communication with specific agricultural field to take sensory data from soil and ultrasonic level sensor and control the PUMP IN motor and PUMP OUT motor with the help of mobile app.Fig.4.1 shows a block diagram for a system to control specific agricultural field with mobile app and IoT modem.

7.1 Introduction

This chapter describes the development of data logger of agricultural field parameter monitoring system with MATLAB. The system comprises of Arduino, water level sensor, humidity sensor, light sensor, soil moisture sensor, temperature sensor, smoke detector, power supply, PC with MATLAB. The system is designed to monitor the environment and agriculture field parameters. The field device is designed to collect all physical parameters and same is communicated serially to MATLAB with I/O package. Fig.7.1 shows block diagram of the system. Table.7.1 shows the component list required to develop the system.

I. FILL UPS

1. A _____ is an unbranched, indeterminate inflorescence with pedicellate flowers along the axis.
2. A _____ is a type of raceme with flowers that do not have a pedicel.
3. An _____ is a type of raceme with a short axis and multiple floral pedicels of equal length that appear to arise from a common point.
4. Indeterminate simple inflorescences are generally called _____.
5. Determinate simple inflorescences are generally called _____.
6. A compound raceme is often called a _____.
7. _____ are umbels in which the single flowers are replaced by many smaller umbels called umbellets.
8. _____ is the pollen producing part of a flower, usually with a slender filament supporting the anther.
9. _____ is the part of the stamen where pollen is produced.
10. _____ is the ovule producing part of a flower.

I. FILL UPS

1. A seed is defined as a _____ or a reproductive unit formed from fertilized ovule, consisting of an embryo, reserve food and a protective cover.
2. A seed is defined as a mature ovule or a reproductive unit formed from _____ consisting of an embryo, reserve food and a protective cover.
3. A seed is defined as a mature ovule, or a reproductive unit formed from fertilized ovule, consisting of an _____, reserve food and a protective cover.
4. A seed is defined as a mature ovule or a reproductive unit formed from fertilized ovule, consisting of an embryo, _____ and a protective cover.
5. Seed acts as a carrier of _____.
6. Seed must ensure high _____ (true to type).
7. Seed must be viable and have good _____ capacity

I. FILL UPS

1. A specified quantity of seed which is physically identifiable to the types of which certificate may be issued is called _____.
2. Taking small portions of seed random from different position of the lot and combining them is _____ of a seed lot.
3. A small portion taken from representative part of the seed lot is called _____.
4. A mixture of all primary samples taken from the seed lot is called _____.

1. Decorticator is used for shelling pods in

   a) Bhendi

   b) Maize

   c) Groundnut

   d) Sunflower

2. Debearders are used in processing of

   a) Barley

   b) Oats

   c) Wheat

   d) Rice

1. Pomology word is derived from a—————————

   a) Greek word

   b) Latin word

   c) English word

   d) None of these

2. Deficiency of ————————vitamin causes scurvy.

   a) A

   b) B

   c) C

   d) D

1. The normal gestation period of buffalo is

   a) 280 days

   b) 290 days

   c) 300 days

   d) 310 days

2. The best crop of silage making is

   a) Maize

   b) Jowar

   c) Bajra

   d) Lucerne

Vegetable seed drying is the most critical stage for any shop floor activities. Only properly dried seed will be taken for processing and all the other activities from seed receipt to storage. Seed producers harvest the seed which will have more moisture than packaged seed. For example onion seed harvested when its moisture at 60% but eventually dried to 10-12% for safe storage and packaging. Seed drying is highly skilled and specialized activity without affecting the seed quality. Proper drying procedures are vital for storage and field performance of seed lots. Drying prevents germination of the seed, the growth of bacteria and mould and it reduces the conditions for development of insects. The moisture content of a seed is influenced by the humidity of the air because they are very hygroscopic in nature. The more moisture in the air, the higher the moisture content of the product. If seed are harvested during warm, humid weather, the moisture content of the seed will be high because the relative humidity of the air is high as well. It is necessary to dry the seed before it can be stored safely. The method of drying depends on the local conditions (climate, season, volume of the seed, type of seed etc)

Vegetable seed drying is the most critical stage for any shop floor activities. Only properly dried seed will be taken for processing and all the other activities from seed receipt to storage. Seed producers harvest the seed which will have more moisture than packaged seed. For example onion seed harvested when its moisture at 60% but eventually dried to 10-12% for safe storage and packaging. Seed drying is highly skilled and specialized activity without affecting the seed quality. Proper drying procedures are vital for storage and field performance of seed lots. Drying prevents germination of the seed, the growth of bacteria and mould and it reduces the conditions for development of insects. The moisture content of a seed is influenced by the humidity of the air because they are very hygroscopic in nature. The more moisture in the air, the higher the moisture content of the product. If seed are harvested during warm, humid weather, the moisture content of the seed will be high because the relative humidity of the air is high as well. It is necessary to dry the seed before it can be stored safely. The method of drying depends on the local conditions (climate, season, volume of the seed, type of seed etc)

Soil regeneration is about bulding or making topsoil. It is a particular form of ecological regeneration within the field of restoration ecology is the act/idea of replenishingthe top soil with beneficial nutrients casing natural methods. Time required from inorganic to organic would be about 60 to 200 days depending upon the situation. Once the inorganic fertilization is stopped, following actions facilitate quick conversion:

• Apply Farm yard/Poultry manure available in the farm as a basal dressing.
• Sow 25 kg of multi varietal seeds (MVS) in one acre.
• Allow it to grow up to 60 days.
• Inoculate the soil with the bio-agents like Azospirillum, Phosphobacterium, Pseudomonas flouresens, Trichoderma viride on 30 days after sowing (DAS).
• Incorporate in situ 60 DAS (30 t ha^-1 biomass is generated on 60 DAS) green manures.

12.1. General Practices for Storage

• Lime juice is mixed with grains and then sun dried before storage to prevent insect pests (Farmers in Nigeria).
• Seeds are safely stored in earthern pots after mixing with the leaves of neem and Vitex negundo (Farmers in Gujarat, India).
• Drying seeds and grains of all the crops on the new moon day before storing to avoid pest attack.
• Store seed materials in earthen pots which are kept on the ‘Paran’ directly above the furnace in kitchen. The smoke acts as a repellent.
• Grains, trees etc. harvested on full moon day are raqre prone to storage pest attack.
• Mixing the dried leaves of neem with seeds while storing them.

Realizing that nematodes cannot be eliminated, and that we must live with them, the overall goal is to keep the population density as low as possible. The economic threshold is the density of nematodes where the losses incurred exceed the cost of nematode management. It is not advisable to depend on a single method to control nematodes. Efficient management requires judicious and careful integration of several which will result in reduction of nematode populations. Important components of non chemical methods of nematode management program are considered in this chapter.

17.1. Organic Amendments

Manure and fertilizer applications are essential part of growing any crop. Besides supplying required essential nutrients theyhelp in many ways directly or indirectly by suppressing harmful organisms including phytonematodes. The use of organic amendments against nematodes was demonstrated by Linford et al., in as early as 1938. FYM and cattle urine have found to reduce nematode population. Biogas plant waste slurry was found to be effective for nematode management. Compost of water hyacinth, oilcakes, cellulose amendments like sawdust, wheat straw, rice husk, rice hull ash, green manuring with legumes, green leaf incorporation are useful to keep nematode populations low. Non - edible oilcakes like those of neem, karanj, mahua, caster, cotton as well as edible oilcakes groundnut, mustard sesame, coconut have been recommended at 2 - 2.5 t/ha for reduction of root knot and other nematode population in soil. Miscellaneous substances like decaffeinated tea waste, rice hull ash, chicken manure, tannery and food and fruit processing waste, market and domestic organic refuse, dead vegetation and crop stalks, wood shaving, etc. have been recommended for root knot nematode management. Castor leaves (40g/kg) along with NPK at 75:25:37.5 kg/ha achieved reduction of M. javanica population on tomato.

In food production remarkable progress has been made in the last fifty years in agricultural production and self – sufficiency (Food security) has been reached. Yet nutritional security seems to be a distant goal. With depleting natural resources and increasing threat to the environment, sustainable crop production is attracting the attention of the scientists, farmers and administrators. Due to over exploitation of natural resources and indiscriminate use of agro chemicals, green revolution also brought in quite a lot of miseries which focus the urgent need to have EVERGREEN REVOLUTION that is sustainable, leading to food and nutritional security to the rural poor. At this juncture it will be more appropriate to practicing organic agriculrure through the integration of traditional wisdom and modern scientific knowledge in synergy with nature.

19.1. Eco-friendly Technologies for Rice Cultivation

A sound package of eco-friendly technologies to grow rice is being successfully adopted by a few progressive farmers in Puliangudi village in Tirunelveli district of Tamil Nadu. “The technologies work well with indigenous rice varieties such as Kitchili Samba. The cost of cultivation is substantially reduced and the organic rice fetches a premium price in the market,” says Mr. P. Gomathinayagam, a pioneer in organic farming in Puliangudi.

INTRODUCTION

The Cultural practices which includes manipulation /or adjustment of crop production techniques have been as old as possibly agriculture itself. In early stages of agriculture development, the growers through their experiences and observations had known that repeated cultivation of a particular crop species or variety on a piece of land often resulted in crop sickness. By proper crop rotations they had been avoiding such sickness. As a matter of fact, in the present day agriculture, cultural practices are being considered as essential backup methods for plant disease management. Cultural practices often offer the opportunity to alter the environment, the condition of the host, and/or the behavior of the causal agent, to achieve economic management of disease. Most cultural practices used to control plant disease are preventive in nature. Integration of cultural practices, host resistance and pesticides or biocontrol agents may be necessary to provide options for controlling economically important plant diseases

9.1. STATISTICAL METHODS

Measures of central tendency : Three measure of the central tendency of a frequency distribution are mean, median and mode.

1. Mean / average / arithmetic mean : It is sum of all of the data values divided by the number of data values and it affected by extreme values.
2. Median : It is the middle value of the data set when it has been arranged in ascending or descending order. This is not at all affected by extreme values.
3. Mode : It is the value that occurs most often in a distribution. Not affected by extreme values. It used to find the ideal size of different age group. eg: size of readymade garments, shoe size

   Harmonic mean : Reciprocal of the arithmetic mean of the reciprocal of a given value. It deals with rate, price and speed.

Measures of dispersion : It is the degree to which the data tend to spread about the mean value is called dispersion.

1. Range : The range of a distribution with a discrete random variable is the difference between the maximum value and the minimum value.
2. Standard Deviation (SD) : It is the square root of the arithmetic mean of the squares of the deviations measures for the mean or square root of the variance.
3. Variance : It is the average of the squared deviation from the mean or the square of the standard deviation
4. Standard Error (SE) : It is the measure of the mean difference between sample estimate of mean (X) and the population parameter (μ).
5. Coefficient of Variation (CV): It is defined as the ratio of the standard deviation to the mean. This is expressed as percentage.

Free radicals, such as singlet oxygen (¹_O2), superoxide (O₂ ^.–) and some active derivatives of oxygen, like H₂O₂ are although generated in plant cells during the course of normal metabolic processes, but their production is notably enhanced when the plants are exposed to any kind of stress environment. The reactive oxygen species damage important cellular components, including cell membrane by peroxidation of lipid and de-esterification of fatty acids.

Plants have evolved a wide range of mechanisms to contend with this problem. The antioxidant defence system of a plant comprises of a variety of antioxidant molecules and enzymes which take care of free radicals produced in the cells. These enzymes are popularly termed as the ‘Scavenging Enzymes’ or ‘Antioxidative Enzymes’.

Conversion of oxygen molecules into its reactive form leads to induction of a sort of stress in plants, to which we call as ‘Oxidative Stress’. It is the equilibrium between oxidative stress and antioxidant enzymes, which determines the fate of a plant.

Plants possess scavenging enzyme system to protect them from destructive oxidative reactions. These enzymes are not restricted to the intercellular compartment but are also found in the apoplast to a limited extent. Some of the enzymes are as follows:-

A Flame Photometer has long been in use for analysis of elements; however, it is now being gradually replaced by Atomic Absorption Spectrophotometer. The reason being, that the former can analyze only a few elements such as sodium (Na), potassium (K), calcium (Ca), barium (Ba) and lithium (Li), whereas the later can be used to analyze almost all the elements known, provided a specific Hollow Cathode Lamp (HC), for a specific element, is available. In addition, Atomic Absorption Spectrophotometer is more precise and accurate in measurement as compared to Flame Photometer.

In this chapter, we shall deal with the operation techniques, working principles and a brief description of each and every component/constituent unit of a Flame Photometer as well as an Atomic Absorption Spectrophotometer.

Abstract

Designer foods are known by various names like medical foods, fortified foods, nutritional foods, nutraceutical foods, pharma foods etc. These foods are nutritious, maintain health and prevent diseases. Such foods must possess characteristics like modified composition; limit the presence of certain potentially harmful components and include certain desirable ingredients either naturally or by intentional addition. The term designer food emerged some years ago to describe foods tailored to specific concentration and proportion of nutrients that are important to health. These are designed and produced by using different approaches. The term ‘designer foods’ is subjected to change based on nutritional labelling regulations, new developments, consumer perceptions and expectations. Grain improvement through biotechnology emphasizes crop upgrading with a specific challenge to manipulate the endosperm composition in order to improve its intrinsic properties for diet and health. Breeding fruits with higher bioactive compounds for disease resistance and improved composition have stimulated interest in the nutraceutical and processing aspects of the fruits Nutritive and genetic interventions to alter milk composition for specific health and processing opportunities are gaining importance in dairy biotechnology. Designer eggs having modified fat provide choices with different nutritional benefits. The options suggested for designer meat and meat products are through production practices, post-harvest procedures and reformulation techniques. All these features of designer foods will be presented with suitable examples.

Abstract

Research has demonstrated that nutrition plays a crucial role in the prevention of chronic diseases as most of them can be related to diet. Functional food enters the concept of considering food not only necessary for living but also as a source of mental and physical well-being contributing to the prevention and reduction of risk factors for several diseases or enhancing certain physiological functions. One of the most clear objectives of the study of functional foods is to identify and validate biological markers in order to understand the interaction mechanisms between the food component and a body function. Epidemiologic and laboratory data from previous studies suggests that diets rich in fruits and vegetables are associated with a reduced risk of various types of cancers. The reduction in cancer risk may be attributed to the abundance of a family of specific compounds referred to as anthocyanins, which are found in various berries. Anthocyanins are water soluble pigments responsible for the blue, purple, and red color in many plant tissues Strawberry is one of “super fruits”, since they can form a significant component of the diet and are a potential resource of functional foods and nutraceuticals due to their antioxidant capacity and nutritional quality. Strawberries contain high levels of anthocyanins and they are also well liked by consumers. Popularity of strawberries in the consumer market makes them an ideal focus for chemoprevention studies. Strawberries are a rich source of phytochemicals (anthocyanins, catechins, the flavonols quercetin and kaempferol, and ellagic acid) and an important source of essential nutrients (ascorbic acid, potassium, folic acid, carotenoids, B-vitamins). Strawberries are consistently ranked among the top food sources of polyphenols and antioxidant capacity; the preventive and therapeutic health benefits of strawberries may be attributed to the synergistic effects of these bioactives and the nutrients contained in the fruit. These bioactive photochemical contribute the major health-promoting function. Strawberries have shown a remarkably high scavenging activity toward chemically generated radicals, thus making them effective in inhibiting oxidation of human low-density lipoproteins. Antioxidant activity of strawberries could contribute to the prevention of cancer, cardiovascular and other chronic diseases. Hence strawberry can be used as a vital and indispensible functional ingredient for the development offunctional foods and nutraceuticals.

Abstract

Micronutrients and bioactive compounds must be part of the population's diet in sufficient amounts to meet the body's needs. The concentrations of micronutrients and bioactive compounds in plant foods at harvest are known to vary with such factors as the variety or cultivar, stage of maturity, geographic or climatic effects, etc. Most subclasses of polyphenols e.g., phenolics acids and flavonoids, the effects of processing on the contents were found negligible in comparison to the differences between varieties of plants but carotenoids are among the food components most affected by environmental and processing conditions. Thermal processing has long been known to cause significant losses of vitamins, carotenoids and anthocyanins. The heat treatment viz. blanching, pasteurization, sterilization etc. result in losses of thermally labile nutrients and bioactive compounds, but the inactivation of oxidative and other degradative enzymes (e.g., lipoxygenase for carotenoids, polyphenol oxidase for flavonoids, ascorbic acid oxidase for vitamin C). Nutrients in dehydrated products are more likely to undergo degradation during storage because of the greater surface area exposed to oxygen and light. Blanched products generally resist decomposition better than unblanched foods during storage. Compared to losses during processing, subsequent storage often has a small but significant effect on vitamin and bioactive compound contents. Reaction rates are relatively slow at ambient or reduced temperature. The processing method chosen, and storage condition applied finalise the retention of these compounds which decreases with longer processing time, higher processing temperatures and storage of the food.

Abstract

Dietary fibers mostly include non-starch polysaccharides such as celluloses, hemicelluloses, gums and pectins, lignin, resistant dextrins and resistant starches. Based on their water solubility, dietary fibers may be divided into two forms insoluble dietary fiber which includes celluloses, some hemicelluloses and lignins which is fermented to a limited extent in the colon and soluble dietary fiber which includes f-glucans, pectins, gums, mucilages and hemicelluloses that are fermented in the colon. Resistant starch generally considered to be represented by the total amount ofstarch and the product of starch degradation that are not digested in the small intestine andpass into large intestine, and regarded as a component ofdietary fiber. Herbal nutraceutical is used as a powerful instrument in maintaining health and to act against nutritionally induced acute and chronic diseases, thereby promoting optimal health, and quality of life. Dietary spices in their minute quantities has an immense influence on the human health by their antioxidative, chemopreventive, antimutagenic, anti-inflammatory, immune modulatory effects on cells and a wide range of beneficial effects on human health. Nutraceutical is the hybrid of ‘nutrition’ and ‘pharmaceutical’. Nutraceuticals, in broad, are food or part of food playing a significant role in modifying and maintaining normal physiological function that maintains healthy human beings. Functional foods are including whole foods and fortified, enriched, or enhanced foods or dietary components that may reduce the risk of chronic disease and provide a health and physiological benefit beyond the traditional nutrients it contains.

Abstract

Nutraceuticals have potential to be used as food supplement, preventive medicine and the growing evidence points in the direction that certain foods fight and or prevent against diseases. The development of next generation nutraceutical “super foods” or products consist of value-addition in the traditional natural diets.The word Nutraceuticals combine ‘nutrition’ and ‘pharmaceuticals’ to mean that they can be used as preventive drugs or food supplements. The increase in knowledge about the immune response unveils the fact that besides immunological disorders and infections the outcome of many other diseases like diabetes, hypercholesterolemia, rheumatoid arthritis, etc. can be modified by modulating Immune response. Hence, the efficient immunomodulators can be employed to prevent or cure the diseases as immunotherapeutic agents. The most acceptable alternative therapeutic agents are the edible sources. Hence the researchers shifted towards formation of nutraceuticals or foods acting as medicine, a concept which was given by Hippocrates long back.

Abstract

The cereal grains are grown around the world, the most common is wheat, which accounts for one third of the total grain crop worldwide. In addition to providing energy, whole grains contain several key nutrients, including fibers, lipids, B vitamins and minerals as well as other beneficial components such as phenolic acids, flavonoids, lignans and phytosterols. Several of these components function as antioxidants. While multiple studies have been conducted to analyze antioxidants in different grains. In wheat and other grains, naturally occurring phytonutrients with antioxidant activity include phenolic acids, flavonoids, coumarins, polyphenols, phytates, terpenes, carotenoids, tocopherols and tocotrienols. Potential roles of the naturally occurring antioxidants in grains include free radical scavenger, reducing agent, complexation of prooxidant metals, quenchers of singlet-oxygen molecules and antioxidant defense enzyme system activators for biological systems. Wheat grain contains several components that have potential antioxidant activity and thus may have a protective role in human health. Traditional wheat-based breakfast foods include hot and cold ready-to-eat (RTE) cereals, as well as a variety of yeast-leavened and chemically leavened bakery products. Increasing baking time and temperature increases antioxidant activity in the bread crust and lowers antioxidant activity in the bread crumb portion. Wheat and wheat based products, particularly partial and 100% whole grain products have been shown to provide a variety of beneficial components including fiber, vitamins, minerals and other phytonutrients with antioxidant activity. Scientific evidence indicates that consumption of three or more ounce equivalents of whole grain foods per day may reduce the risk of coronary heart disease, type 2 diabetes and certain cancers and help with weight management.

Abstract

Egg is a nutrient dense food, containing high quality proteins and a wide range of vitamins, minerals, trace elements, PUFA, MUFA etc. Whole egg slices were prepared by boiling in water technique for a predetermined time i.e. 15 min. The egg slices were prepared with spice extract at different levels of 2%, 5%, 7% and 10%, out of which 5% was found acceptable by sensory evaluation. The egg slices with 5% spice extract were then subjected to frying in different oils such as mustard oil, rice bran oil, sunflower oil and soya bean oil. Among all of the fried egg slices and control (without any spice extract and frying), on sensory evaluation, fried egg slices with mustard oil was most preferred. Texture analysis results shows that hardness was increased on frying and highest in fried egg slices with rice bran oil. Also the values for other TPA component viz. adhesiveness, cohesiveness, gumminess and chewiness were increased on frying as compared with control. Among the fried egg slices, highest values for adhesiveness, cohesiveness, gumminess was observed in egg slices with rice bran oil. However, chewiness of fried egg slices with sunflower oil was highest. It can be concluded from present study that the egg slices fried in mustard oil was organoleptically acceptable with good textural properties.

Abstract

Nanotechnology deals with understanding and control of matter at 1-100 nm dimensions. Nano-sized materials have been part of everyday life in the form of biological entities and processes. Many of the structural building elements in foods are colloids in nature and are built up as a result of self assembly of nano-sized molecules in particles or at interfaces. The most important food raw materials-proteins, starches and fats undergo structural changes at the nanometer and micrometer scales during normal food processing. Unique phenomena occurring at this length scale are being exploited for novel food applications. Functional foods are products, in food or drink form, which influence specific functions in the body and thereby offer benefits for health, well-being, or performance beyond their regular nutritional value. Nanotechnology promises to provide means of altering and manipulating food products to efficiently deliver nutrients like proteins and antioxidants for precisely targeted nutritional and health benefits. Nanotechnology applications for functional food ingredients and additives offer range of benefits to the consumer in terms of innovative, tasteful and healthy food products. Nanoencapsulation systems aid smart protection and delivery of bioactives so as to ensure their stability, taste, colour, safety and bioavailability. The advent of nanotechnology has opened up innovations in food packaging with improved stability and barrier properties. However, need exists to develop regulatory systems for managing any risks associated with functional nanofoods and the use of nanotechnologies in the food industry.

Abstract

The concern of consumers for convenience and healthy foods involves many parameters like functional and nutraceutical properties, ease to prepare, good quality, economics as well as good nutritional profile of the food. This trend of convenience has been increasing in today's world because of the societal changes like the aging of population, the increasing entry of women into the labor force, the change to a multi-cultured society and the increasing polarization between poor and rich. Value addition to the traditional sources is a medium to bring variety products into the market. Cereal starches possess a wide application in the food industry as an additive but the native starch is not widely used in food industry due to its poor functional properties. Pregelatinized starches and flours have become important in processed foods because the functional properties of the starches and flours are improved over the native starches and cereal flours. Modification is a process which alters the structure of the starch in the wheat endosperm by affecting the hydrogen bonds in a controllable manner. Modification of starch and flours is generally done by several methods such as chemical degradation, physical alteration or enzymatic transformation. The primary objective of modification is to reduce the hot viscosity of the starch paste so that higher concentrations of starch can be dispersed without excessive thickening. The pregelatinized flours offer a tremendous number of functional benefits to variety of foods such as bakeries, snacks, beverages as well as nutritional foods. The various functional benefits of pre-gelatinized starch/flour as an additive are classified as fat replacer, texture improver, stabilizer, emulsifier, thickening agent and for freeze-thaw stability. Keywords: Pregelatinization, modification, functionality, cereal flour.

Abstract

The aim of this work was to reduce the natural fermentation period of ‘idli’ from the conventional 14 hr to10 hr by adding underutilized okara for the preparation of ‘idli’. Black gram was partially substituted with soy residue okara in the ratio of (1:1). After 14 hr of natural fermentation, the pH and total acidity of control ‘idli’ batter was 4.55 and 0.68% and that of okara fortified ‘idli’ batter was 4.57 and 0.56%, respectively. The amount of CO₂ released by the control and okara fortified batter was 12.5% and 22.5% respectively. The viable count of yeast and mold, lactics and mesophilic bacteria in control and okara batter increased with time reaching 8.4 and 9.6, 8.2 and 7.5, and 8.6 and 9.2 log10 cfu/g, respectively at the end of 10 hr of natural fermentation. Okara fortified ‘idli’ was soft and spongy compared to control ‘idli’.

Abstract

Rice is the most produced and consumed source of stable food in J andK, and is excellent in genetic diversity. Rice production is the principal activity and a major source of income for the State. Traditional rice varieties have an enhancing potential in wide range of nutraceutical and functional foods. Besides possessing medicinal and nutritional properties, the by-products generated from these rice varieties in various post harvest operations are equally valuable. Traditional healers and local farmers have been using these traditional varieties in ayurveda and in curing of various kinds of ailments, such as cooling the body in ayurvedic treatments, improving vocal clarity, curing of boils, swellings and skin blemishes. Extracts of brown rice are also used as energy drink in individuals, patients and in treatment of chronic gastric problems, jaundice, dysenteric complaints and to increase lactation and nutrition to Childs. Sticky glutinous rice has been reported in treatment of stomach upsets, nausea, heart-burn and indigestion. Brown rice extracts have been reported in treatments of breast and stomach cancer and warts.

Abstract

Starch is a naturally occurring biodegradable polymer and readily available from agriculture. It is widely used in food and non-food applications and isolated from crops such as maize, potatoes, tapioca, rice and wheat. However, in recent years substantial progress has been made on the molecular structure of cereal and tuber starches and their impact on functionality, the following is a subjective summary that presents status of knowledge on isolation of starch from non-conventional source like Acorus calamus (sweet flag). The focus is on potential application of the source as food and non-food derivatives. Extensive work has been carried out on agronomic and phenotypic properties for most tropical crops, but relatively little study has been carried out on the properties which are of direct technical and economic interest to competitive food and non-food industry. Sweet flag (Acorus calamus L.) is an emergent macrophyte, originating in Asia, commonly found in European wetlands. Rhizome is the most important storage organ in Acorus. It contains considerable amounts of carbohydrates and nitrogen-rich compound. This species is growing to 6 feet, with long lanceolate leaves %-inch wide with pronounced midrib, aromatic, with stout rhizomes. The major proportion of total non-structural carbohydrates in rhizomes is starch (91-93% and 51-64% in rhizomes and roots, respectively). However, amount of starch varies among the organs as well. Rhizomes contain the highest amount of starch followed by branched roots and finally by unbranched roots. Rhizomes comprises single to compound grains, with clusters present in high frequencies. Non-conventional food resources and their value addition have attracted attention in the recent years for their potential use as functional ingredients in food formulations, besides food they have also been used for non-food applications. So there is tremendous potential for the profitable commercial use of these tropical starches and exploring them for further use.

Abstract

Due to rapidly increasing knowledge on nutrition and medicine, concepts about food and health has dramatically changed and resulted in consumption of nutraceuticals and natural plant foods.Use of nutritional therapy and phytotherapy have become progressively popular to improve health, and to prevent and treat diseases. Plants have long history of their uses as ingredients of human nutrition and folk medicine,because of availability of huge array of high-value components and multiple-activity bio-actives. “Licorice” means “sweet root” in Greek is a plant of ancient origin, indigenous to Southern Europe and Asia Minor. Most of the supply comes from former USSR, Spain, Turkey, Syria, Iraq and Afghanistan, with total production between 40,000 and 50,000 tonnes per annum. The chemical constituents of the roots include several bioactive compounds, such as glycyrrhizin (~16%), different sugars (up to 18%) ,flavonoids, saponoids,sterols, starches, amino acids, gums and essential oils. A large number of clinical and experimental studies reported its useful biological properties such as antioxidant, immunomodulatory, cardioprotective, anti-inflammatory, anti-viral and anticancer effects. It is useful in anaemia, gout, asthama,ulcers, sore throat, tonsillitis, diabetes, tuberculosis, flatulence, diarrhea, sexual debility, epilepsy, hyperdypsia, fever, coughs, skin diseases, eye diseases, swellings,constipation, rheumatism, acidity, leucorrhoea, bleeding, jaundice, hiccough, hoarseness, bronchitis.Recently, it is reported to have neurological properties such as antidepressant, anxiolytic, and anticonvulsant effects. The most abundant minerals present are calcium, sodium, phosphorus, potassium and iron. Licorice extracts and its principle component, glycyrrhizin, have extensive use in foods,as a natural sweetener and flavoring agent in beverage, confectionery, tobacco and pharmaceutical industry. It is in great demand globally as medicinal and nutritional supplement due to it's wide range of properties, which also indicates that in future the plant could serve as a “lead” for the development of novel agents having good efficacy in various disorders.

Abstract

Kulfi is a mixture of fat; sugar and milk solid not fat together with added flavour. So diabetics people on restricted diets cannot consume kulfi having normal ingredients. Now-a-days, consumers demand for low fat/calorie products has significantly raised in an attempt to limit health problems, to lose or stabilize their weight and to work within the frame of a healthier diet. The role of fat replacers and sugar substitutes in the successful manufacture of these products is crucial. Development of sugar free kulfi would certainly ensure diabetic/obese people to enjoy ice cream/ kulfi. The current study is to standardize the kulfi recipe with fat and calorie replacer. Basic formula mix consist of Whole milk 60 percent, SMP 12 percent, Sugar 13 percent, Cream 15 percent and Stabilizer 0.5 percent where the whole milk was replaced by skim milk, cream and sugar was replaced by maltodextrin as a bulking agent and aspartame respectively alongwith sodium alginate as a stabilizer. The replacers were incorporated at four different levels of 0, 25, 50, 75 and 100 percent to the basic formula mix. Freezing of above kulfi mix was done by traditional method and softy freezer method. Sensory evaluation was carried out by using 9-point hedonic scale through semi-trained judges and results were statistically analyzed. On the basis of sensory scores it was revealed that sugar could be replaced 100% by artificial sweetener, bulking agent (Maltodextrin). It was found from the sensory scores that the milk fat in kulfi can be replaced upto 75 percent by sodium caseinate thereafter increase in caseinate gives prominent flavour of casein and kulfi body becomes thick and hard. It was concluded from the results that 100 percent sugar replacement was found feasible in preparation of low fat and low calorie kulfi. Results of the low fat and low calorie kulfi mix indicated that there was 32.29 percent reduction in the calorific value of experimental kulfi as compared to the control sample (traditional). It was concluded from the results that the kulfi with 75 percent less fat and 100 percent sugar free can be prepared with low cost in comparison with control.

Abstract

Vitamin D or “sunshine vitamin” is an essential fat soluble vitamin required for healthy bones. It is responsible for enhancing intestinal absorption of calcium and phosphate. Its deficiency leads to osteoporosis and osteomalacia in adults and rickets and other bone deformities in children. Vitamin D deficiency is being reported to be quite common these days due to modernization accompanied with changes in lifestyle and environmental pollution which limit sun exposure for several individuals. Inadequate sun exposure results in reduced vitamin D synthesis and ultimately poor vitamin D status necessitating compensation through dietary intake. Dietary vitamin D intake is very low in India because of low consumption of vitamin D rich foods, absence of fortification and little use of supplements. It is becoming a major public health problem, needing immediate attention. Fortification of milk and milk products is the safe and effective approach to deal with widespread vitamin D deficiency as milk is consumed and liked equally by all age groups. This paper highlights the importance, sources, recommended allowances and other relevant issues related to vitamin D fortification and its health effects.

ABSTRACT

Multispectral imagery has been used as the data source for natural resource mapping and land observational remote sensing from airborne and satellite systems since the early 1960s. Over the past two decades, advances in sensor technology have made it possible for the collection of several hundred spectral bands. This is commonly refe rred to as hyperspectral imagery. Thus it is possible to construct a complete reflectance spectrum of every pixel in the scene. This review highlights the hyperspectral remote sensing system development, hyper spectral data processing and difference between multispectral and hyperspectral data; spatial and spectral resolutions and focuses on the application of hyperspectral imagery in natural resource studies and, in particular the classification and mapping of land resources.

ABSTRACT

Mineral composition and their distribution on planetary surfaces provides important clues to the evolutionary processes that the planetary bodies have undergone since their formation. For distant and inaccessible planets, remote sensing, either from Earth-based telescopes or from an orbiter around the planetary body, using reflectance spectroscopy over a wide range of the electromagnetic spectrum (UV-Visible-IR), can provide surface distribution of minerals. With advances in technology, a high-resolution hyperspectral imager onboard an orbiter has developed into a powerful tool for compositional mapping of planetary surfaces. Interpretation of the signals from these distant and relatively unknown destinations is a challenging task due to scarcity of available ground truth. Here, we describe the technique with its applicability to airless bodies, such as Moon, in the context of the Indian Moon mission, Chandrayaan-1, and, the intricacies involved in the data analyses.

Keywords : Reflectance spectroscopy, hyperspectral data, remote sensing, planets, moon

1. INTRODUCTION

The primary goal of planetary exploration is to understand the mechanism by which planetary objects (planets, dwarf planets, satellites and small solar system bodies) have evolved with time. The information gathered from the study of individual bodies is integrated to comprehend the development of our solar system. The present understanding envisages our solar system to have formed from the solar nebula, produced as a consequence of the collapse of a molecular cloud. While the central mass gravitated and formed the sun, the gas and dust surrounding it condensed to form grains and formed the proto-planetary disk. These grains, through a series of processes, finally aggregated to form of the various planetary bodies. Existing Astronomical, chemical and mineralogical evidences from studies of lunar samples, meteorites and, remote sensing observations suggest that the planetary bodies are heterogeneous and possess extreme compositional and morphological diversity. The internal energy of a planetary body, a function of its size, is responsible for the differences in the degree of differentiation a body has undergone leading to the variations in their surface composition. Large planets like the Earth and Venus are still evolving whereas the small asteroids have barely evolved after their formation and are considered primitive. The wide variety of planetary bodies in our solar system is therefore reminiscent of the various stages of evolution that our solar system went through. The degree of melting and cycling through episodes of differentiation determine the mineral inventory on a planetary body. Therefore, distribution and composition of various minerals can be used to understand various stages of chemical evolution of a planetary body. Mineral mapping of planetary surfaces is thus useful in understanding the petrogenetic history.

ABSTRACT

Greenseeker is a handheld computer mounted sensor for observing normalized difference vegetation Index [NDVI= (NIR “R)/(NIR+R)], which may be used to estimate site specific amount of fertilizer nitrogen depending up on the crop condition. The sensor can be used for yield estimation and developing remote sensing based growth models. It is an active sensor with a built in light source for illuminating the target and records reflected light from vegetation at wavelength of 670 nm (red region) and 780 nm (near infrared region) of electromagnetic spectrum. The swath covered by the Sensor is 0.75 m when sensor is placed about 1.0 m above crop canopy.

The sensor was used to record NDVI in wheat- sugarcane intercropping system wherein wheat was grown on raised beds of 1.04 m width with six rows of wheat and sugarcane in furrows at row spacing of 1.38 m. The wheat variety PBW 343 was sown with nitrogen levels @ 0, 30, 60, 90, 120, 150, 180 and 210 kg N ha^-1 (all basal) and sugarcane variety CoSe 92423 was planted in furrows on 7^th November, 2006 in a medium textured loam soil.

The NDVI was recorded in wheat at 17, 41, 59, 73, 88, 113 and 129 DAS using Greenseeker and Spectroradiometer (UNISPEC ^TM of PP system, USA) simulating normal satellite bands i.e.

NIR: 770-860 nm, Red: 620-680 nm, Green: 520-580 nm. The maximum NDVI (recorded at 88 DAS) was used to develop INSEY “ yield relationship in wheat. The NDVI recorded by Greenseeker was integrated with NDVI recorded by Spectroradiometer.

The Greenseeker was also used to monitor crop growth in sugarcane. The NDVI was correlated with shoot population, plant height, LAI and total biomass during formative and crop elongation phase of sugarcane till end of November 2007. Highly significant (at 1%) correlation was observed between GS- NDVI and shoot population till mid August and LAI in sugarcane for entire crop cycle. An exponential model (R² = 0.9017) was developed to estimate LAI of sugarcane from NDVI. The NDVI was significantly (at 5 %) was correlated with plant height till mid August. However, the correlation between total crop biomass in sugarcane and NDVI remained non-significant.

ABSTRACT

The improvement of spatial resolution of satellite remote sensing (RS) imagery, it is possible to update spatial data infrastructure efficiently by satellite RS images. But the RS data volume is vast, so high processing capacity is required. In order to extract the anticipated images from vast image database, effective retrieval technique is vital. The rapid development of Earth Observation System (EOS), the spatial resolution, temporal resolution and spectral resolution of Remote Sensing (RS) image have been improved greatly. Based on contentbased image retrieval, content-based RS image retrieval is put forward and some topics including retrieval pattern, useful image content, feature extraction and similarity measure are researched. After related images are retrieved from vast image database, it is necessary to discover those change areas, so change detection from multitemporal RS images are discussed further. RS image data mining and knowledge discovery is the synergy of Spatial Data Mining (SDM) and Image Data Mining (IDM). It is pointed out that content based RS image retrieval will be potential advantageous in the future and all the techniques discussed in this paper including retrieval modes, content-useful in RS image retrieval. Content-based image retrieval (CBIR) is one of the hot issues in image retrieval, and it can be used to RS image retrieval. That lead to a new area: content-based RS imagery retrieval.

Keywords : Remote Sensing, content based RS image Retrieval, Earth Observation System, Spatial Data Mining, Image Data Mining.

ABSTRACT

The purpose of this paper is to utilize thermal infra red remote sensing data to find the location of heat processing units which contribute to high temperatures. These industries occur as anomalous pixels in urban area on the temperature map derived from the thermal remote sensing data. The night scenes of ASTER thermal infra red data were used for this study. It is concluded that analysis of temporal thermal remote sensing data can be used as a tool in environmental impact assessment and management. The temperature maps can be helpful in decision making process of siting / relocation of heat producing industries in and around cities.

1. INTRODUCTION

For sustainable industrial development, management and regular monitoring of the industries is needed. Knowledge of industrial impacts on the environment is an essential for environmental impact assessment and management. Thermal remotes sensing techniques can be applied for this.