eChapters

Domestic animals including chicken and mammals, belong to the category of homeotherms, as opposed to poikilotherms. Homeotherms or warm blooded animals are those which are able to maintain constant body temperature in the face of varying environmental temperature. The poikilotherms or the cold blooded animals change their body temperature according to the temperature of the surroundings. Most invertebrates and lower vertebrates belong to the category of poikilotherms.

Why do animals have to maintain constant body temperature? As we are aware that enzymatic reactions in the body are temperature sensitive. In fact, a 10 degree centigrade increase in temperature can result in doubling of the reaction rates. In order to maintain optimum functioning of the enzymatic reactions in the body a constant temperature is required. This constant body temperature is not very constant in the sense that it varies somewhat during exercise and also when the animal is exposed to extremes of temperature of the surroundings. That means that the temperature regulation mechanisms in the body are not 100 percent perfect.

At this stage it is desirable to clarify the distinction between surface temperature and core temperature. The surface temperature, in contrast to the core temperature rises and falls with the temperature of the surroundings. It is the temperature of the deep tissues or internal organs which remains constant. The temperature of the rectum is usually taken as a useful indicator of core temperature because of the ease of measurement. The rectal temperature of several domestic animals is given in Table 1.

I. INTRODUCTION

The Websites are soaked in information, much of it with varying degrees of copyright protection. In fact, the reality is that almost everything on the Net is protected by copyright law. E-business Websites are a composition of materials, often consisting of words, graphics, audio, and video that are expressed to the consumer as information content. The owners and Website developers carefully select the content to sell the company’s product or service. The subject matter expressed in the site is an electronic publication of this content. Since, designing, producing, and maintaining a sophisticated Website is very expensive, protecting content ownership is extremely important. Electronic commerce will continue to be highly competitive. As Websites become more and more interactive with consumers, their creation, design, and maintenance place enormous demands on innovative marketing techniques that should be legally protected.

Never before has it been so easy to violate a copyright owner’s exclusive right to copy the material. Everyone with a computer and an Internet connection creates his own Web pages and thus become a publisher. Hence the rules that once applied to only a few companies bind million of people now. Imagine having paid a Website developer hundreds of thousands of rupees to launch a killer application and acquiring millions of Rupees from a venture capitalist firm, only to discover that another e—business is using your online material. Or consider a scenario where your Website is linked to an e-business that displayed copyrighted material without the owner’s consent. Could your company be liable under a theory of copyright infringement? This paper highlights the scenario when contents of your Website are exploited by others without your permission or knowledge. The discussion is centered on copyright issues involved in the practices of linking, inlining and framing technologies which are normally being used on the Internet.

Management can be viewed as a group effort towards a common goal in which team behaviour plays the important role. According to this view, the material resources and external environment are common to all management; what makes for effectiveness and success of one group relative others is management - that is, the human element - behaving in group and leading the business to its determined goal.

Management may in short be called a science of decision-making or a science of choice. A farmer has to make judicious decisions on the use of scarce resources, having alternative uses to obtain the maximum profit and family satisfaction on a continuous basis from the farm as a whole. In other words, management seeks to help the producer in deciding problems like what to produce, how much to produce and when to buy and sell and organization and managerial problems relating to these decisions.

Management – Definition

According to Lawrence A. Appley, management is an art of getting things done through the efforts of other people.

Every small business manager is a personnel manager in the sense that work is done through people, with people and for the people. Consequently, the owner-manager should be personally capable of handling employee relations until the company becomes large enough to afford a personnel manager. Planning personnel requirement, developing sources from which new employees can be recruited, choosing (recruiting) the needed people, training and developing them into productive workers, evaluating their performance, compensating them and dealing with various personnel relationship, including industrial relation are included under personnel management.

Staffing

Staffing is a critical function of organizing and managing a successful business. All companies, whether large or small, are involved in the staffing process. All businesses run the same risk every time they hire a new employee. The staffing function is generally divided into four major categories (1) staffing needs, (2) acquisition, (3) motivation, and (4) retention.

The science of Meteorology is defined as the science that deals with physical and chemical processes of the lower atmosphere. The physical and chemical changes in the lower atmosphere produce weather and popularly known as the weather science. The weather science concerns the study of structure, state and behaviour of the lower atmosphere. It is essentially an observational science dealing with different atmospheric variables such as atmospheric pressure, temperature, wind, humidity, density, cloud amount, radiation, precipitation and related variables at a given moment and attempts to predict the behaviour of atmosphere over a period of few hours to few days ahead and disseminate the same in time to the users? community. The statistical approach of weather phenomena deals with the mean state of the physical properties of atmosphere. This branch of science is popularly known as Climatology. The weather science can be categorized into several branches based on method of approach, purpose and function, scale and region. Based on the purpose and function, it can be divided into several branches like Livestock Meteorology, Agro Meteorology, Forest Meteorology, Hydro Meteorology and Bio-Meteorology (Fig 1.1).

Selye, H (1936), the pioneer in stress physiology, defined stressors as noxious stimuli that increase adrenocorticotropic hormone and clubbed these stimuli under the term stress. Rivier and Rivest (1991) and Chrousos and Gold (1992) defined stress as “a state of disharmony, or threatened homeostasis.” Stress challenges homeostasis, but does not disrupt it, in an adapting organism. McEwen (2000) defined stress as a “real or interpreted threat to physiological or psychological integrity that results in physiological and/or behavioral responses.” The following are the various stressors:

Air, water and land constitute our environment and these are technically known as atmosphere, hydrosphere and lithosphere respectively. All these spheres together constitute the biosphere. In the biosphere, apart from human beings, plants, animals, birds, fishes, insects and microorganisms also exist. All these living beings get affected whenever a change, physical or chemical occurs in the biosphere. This change is termed as pollution and the agents that institute these changes are called pollutants. A kind of pollution that has come in to prominence more recently is radiation, causing environmental and health problems of immense magnitude. The radiation may either be natural like cosmic radiation from outer space and sun?s radiations or produced by disintegration of naturally occurring and manmade elements. Such radiation is not visible to our eyes, but can penetrate the body and do immense harm. Man and animals have been continually exposed to different sources of radiation. But the radiation levels were well within the tolerable limits in the past. Yet, since the mid 1970?s human activities have been changing the chemistry of atmosphere in a way that reduces the amount of ozone in the stratosphere which is responsible for protecting the living things from excessive amounts of ultraviolet radiation. Further, it is only after the advent of nuclear power stations that radiations increased to reach harmful levels. Though mankind has benefitted by harnessing nuclear energy for peaceful purposes, one cannot deny the inherent dangers of radiation. Nuclear power plants no doubt help in the production of controlled electricity. However, a worldwide controversy is ragging over the existing nuclear power plants and setting up of new plants particularly since 1986 disaster of Chernobyl nuclear plant in Russia. A fire in the plant allowed massive amounts of radiation to be released into the atmosphere. This fall out drifted into the Scandinavia and Eastern Europe causing enormous damage to crop and livestock.

21.1 Automatic Weather Station

Automatic Weather Station, popularly known as AWS, is an electronic device and an automated version of the traditional weather station. Numerous weather sensors are connected to the system which automatically records and stores weather data. It is quite useful in remote areas where no frequent access is possible. The system requires hardware as well as software to log in, store, display, retrieve and analyze the data. The digital data recorded from AWS can be downloaded to the laptop through the memory device. The same digital data can be converted to the actual values indicating various weather parameters through the software provided along with the AWS. It should be also maintained in the desktop of PC/AT so that the data are doubly assured. Every AWS has its own software depending upon the manufactures. Time interval can be fixed for recording weather data depending upon the purpose since it is a continuous recorder. Continuous AWS data are integrated at hourly or half-hourly interval for monitoring weather data, otherwise enormous data are continuously stored and no way are used. Of course, continuous weather display is possible for monitoring weather conditions spatially and temporarily.

Automatic Weather Station consists of a datalogger, rechargeable battery, telemetry (optional) and the meteorological sensors with an attached solar panel. The system may report in near real time via GPRS or save the data for later recovery. Majority of automatic weather stations possesses normally Thermometer Sensor for measuring temperature; Anemometer for measuring wind speed; Wind vane for measuring wind direction; Hygrometer for measuring relative humidity; Barometer for measuring atmospheric pressure; Rain gauge for measuring rainfall and Pyranometer for measuring solar radiation. Automatic weather stations are based around a programmable datalogger that measures the sensors, then processes, stores, and transmits the data. Dataloggers have wide operating temperature ranges, on-board instructions, programmable execution intervals and input channels for commonly used sensors. Wind vector, wet bulb, histogram and sample on maxima or minima are standard in the datalogger instruction sets. Most sensors can be measured directly without external signal conditioning. Data are typically viewed and stored in the units of your choice(e.g., wind speed in mph, m/s, knots). Measurement rates and data recording intervals are independently programmable, allowing calculation of 15 minute, hourly, and daily data values from 1 minute or 1 second measurements, for example. Conditional outputs, such as rainfall intensity and wind gusts, can also be recorded. The program can be modified at any time to accommodate different sensor configurations or new data processing requirements.

Rearing poultry industrially is a necessity in the present condition where the demand is high and the land holdings for extensive rearing is diminishing. All over the world the poultry industry is growing rapidly. The poultry industry in India is growing at around 8 per cent per annum. The poultry population of the country mainly consists of chicken, ducks, quails, ornamental birds and ratites. Chicken form is the major component of the industry. They are mainly reared as broilers for meat purpose and as layers for eggs. The climatic variations and their effects on profitable poultry rearing are an important topic of study in the current situation, where intensive rearing and global warming are being discussed with equal importance. The welfare aspects of the birds are also a matter of concern all over the world. Thus the knowledge of normal physiology of poultry, the effects of the tropical climate on them and the measures to alleviate detrimental effects produced by adverse climatic conditions have been discussed in detail here.

Abstract

Geological conditions in the Tertiary mountainous areas of the western and eastern hill ranges of Manipur often cause landslide movements. These repeatedly occur mostly in old landslide regions during rainy seasons on a large scale, causing considerable economic loss and injuries and deaths of humans. In order to improve such landslide hazard assessment of the region for effective mitigation, Electrical resistivity surveys were conducted using Schlumberger array technique on the very unstable and problematic frontal part of the Kotland landslide, NH-37, Manipur along three profiles. Electrical resistivities aided the characterization and quantification of the subsurface rock units, structure and tectonic conditions of the Landslided area which can contribute for the better planning of mitigation strategies. The results lead to the elucidation of depth of the different litho-units and the geometry of failure surface. The probable failure surface was observed between 10 and 22m depth, characterised by low resistivity (< 150 Ωm) and geometry of the sliding surface was rotational. In addition, a fault was also inferred in the resistivity pseudosection model and hence the area may be highly vulnerable to landslides.

Abstract

The Nilgiri Mountains of South India is one of the Landslide prone hill ranges in India. The landslides, in general, are due to the independent, interdependent and the combined effects of natural earth system processes, triggering phenomenon and anthropogenic activities. So the scientists, technocrats and the academicians from all over the world have started studying the landslides using various techniques and advanced tools in mapping the morphology, preparing the vulnerability maps and carve out mitigation strategies. But the discrimination of active slides is a difficult task and also needs continuous monitoring and further a time consuming process too. So, in this context, an attempt has been made to study the signatures of active sliding in one of old slides namely the “LINGASLIDE” in which frequent minor sliding events are often reported. In the study, Total station based large scale topographic survey was carried out in LINGASLIDE and from the same 50 cm topographic contours were generated. From such large scale contours, Digital elevation Model (DEM) was generated and from the DEM, shaded relief map was generated.Uutilizing both the contours and shaded relief maps, small slides were mapped in the LINGASLIDE from the well exhibited subsidiary crowns, toes and the traverse cracks. Resistivity tomography surveys were also carried out along two longitudinal profiles and one traverse profile to identify the subsurface geology, the slip surface and the zones of moisture accumulations, if any. The subsidiary crowns, toes, the conjugate fracture systems and the resistivity tomography showed that the LINGASLIDE is active and the sliding is going on towards easterly because of the easterly compression,resulted from the higher slopes caused by the settlements raised over Lingaslide and the obstruction provided by the retaining walls at the toes in the east. Such compressive forces are clear from the NW-SE and NE-SW fractures seen in Lingaslide and the sliding is clear from the cracks seen and monitored in the buildings constructed over Lingaslide.

11.1 Introduction

Economic analysis is the most important parameter for determining the optimum size of farm pond. It is, no doubt that a big size farm pond can meet the irrigation demand of the crops grown in the command areas in addition to meeting the other demand in the command areas. But a big size farm pond is an oversize structure which necessitates large investment to be incurred which may not be economically viable. On the other hand, a small size structure may not be able to meet the crop water demand and also other demands in the command areas and so is called as under-designed structure. It has been observed that as the size of the farm pond gradually increases from a certain minimum size, the total investment cost increases. At the same time, the benefits from the increasing storage capacity of the farm pond also get increased. In such cases, from a purely business point of view, the most economical capacity is that which provides the highest rate of return on investment. As the size of the farm pond increases, the proportion of the benefit/profit to the cost also increases from certain minimum size, attains maximum value at a particular size and then declines as the size further increases. This particular size of the farm pond at which the net profit is maximum, is called as the optimum size. It is to be noted that at the optimum size, the other economic indicators like the benefit-cost ratio and internal rate of return are also high. The variation of net profit with size of the farm pond is a concave curve. The size of the farm pond corresponding to the peak of the curve which represents the highest net profit is the optimum size of the pond.

The principle of obtaining the optimum size of farm pond is to first assume a certain minimum size say five percent of the farm area and conduct the economic analysis by studying the costs and net profits of the assumed size. Then the size is gradually increased and the economic analysis is conducted for each increased size. Then a curve relating the size of the farm pond and net profit is drawn. Such a curve is generally concave shaped. The size of the structure corresponding to the maximum net profit gives the optimum size. It is to be noted that any size chosen more or less than the optimum size would give less net profit and benefit-cost ratio than that of the optimum size.

Sustainable development and efficient management of water is an increasingly complex challenge in India. Increasing population, growing urbanization, and rapid industrialization combined with the need for raising agricultural production generates competing claims for water. There is a growing perception of a sense of an impending water crisis in the country. Some manifestations of this crisis are:

(a) Increasing costs of developing new water resource – Many major and medium irrigation projects seem to remain under execution forever as they slip from one plan to the other with escalating cost and time overruns.

(b) Siltation of reservoirs and owing to lack of maintenance, the capacity of the older irrigation systems seems to be going down.

(c) Declining groundwater table due to over-exploitation imposing an increasing financial burden on farmers who need to deepen their wells and replace their pump sets and on State Governments whose subsidy burden for electricity supplies rises.

(d) Water pollution and degradation of water-related ecosystems - Water in most parts of rivers is not fit for bathing, let alone drinking. Untreated or partially treated sewage from towns and cities is being dumped into the rivers. Untreated or inadequately treated industrial effluents pollute water bodies and also contaminate groundwater,

(e) Wasteful use of already developed water supplies, often encouraged by the subsidies and distorted incentives that influence water use,

(f) Besides in many rural habitations there are pockets where arsenic, nitrate, and fluoride concentration in drinking water are posing a serious health hazard

(g) Rise in water-logging and salinity resulting in degradation of soils in irrigated areas,

(h) Increasing water conflicts about water rights between upper and lower riparian states in a river, conflicts about quality of water, people’s right for rainwater harvesting in a watershed against downstream users, industrial use of groundwater and its impact on water tables and conflicts between urban and rural users etc

(i) The gross irrigated area does not seem to be rising in a manner that it should be, given the investment in irrigation. The difference between potential created and area actually irrigated remains large. Unless we bridge the gap, significant increase in agricultural production will be difficult to realize.

Microorganisms, being ubiquitous, are found in soil, air, water, food, sewage, on body surfaces as well as on degrading and decomposing substances. Their survival and continued growth mostly depend on an adequate supply of nutrients and favourable growth environments. The culture media (nutrients) consisting of chemicals support the growth of microorganisms in a given condition. They are devised in such a way that the organism should get all the nutritional requirements. These are usually prepared in laboratory by weighing and dispensing the individual ingredients. Generally, the common media contain both inorganic and organic nutrients; however, for the cultivation of large number of microorganisms, specialized media are required.

Basically the culture media are of three types: (1) Natural, (2) Semi synthetic and (3) Synthetic.

10.1 Transformation of E. coli by electroporation Principle

Preparation of electro-competent bacteria is considerably easier than preparing cells for transformation by chemical methods. Bacteria are simply grown to mid –log phase, chilled, centrifuged, washed extensively with ice cold buffer containing 10% glycerol. DNA may be introduced immediately into the bacteria by exposing them to a short high voltage electrical discharge. Alternatively, the cell suspension may be snap frozen and stored at-70^oC for 6 months before electroporation, without loss of transforming efficiency.

Since E.coli cells are small, they require very high strengths (12.5- 15KV cm^-1) for electroporation as compared to those used to introduce DNA into eukaryotic cells. Electroporation is temperature dependent and is best carried out at 0-4°C.

The highest efficiency of transformation is obtained when the concentration of input DNA is high (1-10 μg/ml) and when the length and intensity of the electrical pulse are such that only 30-50% of the cells survive in the procedure. Under these conditions, as many as 80% of the surviving cells may be transformed. Higher frequencies of transformation (colonies/ molecules input DNA) are obtained when the DNA concentration is low (?10pg/ml).

The method outlined in this protocol is followed with most strains of E.coli and with plasmids <15kb in size. However, substantial variation in the efficiency of transformation between the strains of E. coli. has been reported. As in case with chemical transformation, linear plasmid DNAs introduced into E.coli by a pulsed electrical discharge transform very efficiently from 10 to 1000 fold but less efficiently than the corresponding closed circular DNA – perhaps because the exposed terminal of linear DNA are susceptible to attack by intracellular nucleases.

Introduction

Farming system that advised integrated the needs of the ancestors the economic factors like profitability, amusing acceptability and economically active and technically achievable enterprises in a accumulated furnishings wherein availability of acreage resources, basement and institutions such as irrigation, marketing facility business accessories including storage and transportation and credit besides the agro biological application namely interdependence. Technically achievable enterprises and the achievement of individual farmers are to be advised as above factors in farming system approach. Farming system, therefore, designates a set of agronomical activities organized while attention acreage productivity, anatomy superior and advancement adorable similar of biological assortment and ecological stability. The accent is added on a system rather than on gross output. In added words farming system is an ability administration action to accomplish bread-and-butter and sustain agronomical accumulation to be accommodated a sorted claim of the acreage domiciliary while attention the ability and advancement top quality. Farming system in its absolute faculty will advise the afterward agency to lift the abridgement of Indian farming and accepted of active of the farmers. Farming system distinctively refers to an accumulation aggregate of enterprises in which the articles and or the byproducts of one action serve as the inputs for accumulation of added enterprise. Farming systems access has appear after than that farming came into actuality getting strategically activated as breadth specific suitability. Farming systems decidedly contributed to the re-silence of farming and as able-bodied as affluence farming, organic farming and inorganic farming. Agro-climatic regions of the country are abounding adapted and differed from breadth to breadth wherein types of farming are as well different. Somewhere, the farming is based on horticulture, ley farming, agroforestry and abounding added like farming of agronomic crops. India’s bounded locations are amenable for such variations, as the assertive locations acquaintance altered climates, appropriately affecting anniversary region’s agronomical abundance differently. India is actual abased on its vagaries of cloud burst abundantly to accord satisfactory crop yields. India’s farming has all-encompassing accomplishments which go aback to at organic 10 thousand years. Reportedly, the country holds the additional position currently in agronomical accumulation in the world. In 2007, farming and affiliated industries fabricated up added than 16% of India’s GDP. Despite the abiding abatement in agriculture’s addition to the country’s GDP, now the farming is getting advised as the bigger activities antecedent of alimentation in the country and plays a key role in the socio-economic advance of the country. Now a day, India is the additional bigger ambassador of wheat, rice, cotton, sugarcane, silk, groundnuts, and of abounding more. It is as well the bigger farming of vegetables and fruit, apery 8.6% and 10.9% of all-embracing production, respectively. The above fruits produced are mangoes, papayas, sapota, and bananas. India as well has the bigger amount of livestock in the world, captivation 281 million. The country housed the additional bigger amount of animals in the tune with 175 million in the year 2008. In this accomplishments the apperception of farming system, appropriately was demography application as aggregate of agri-horti and animals, veterinary including fisheries taken into account as integrated approach.

It is a discipline of science that describes handling, preparation and storage of food that can prevent food-borne diseases. When there are two or more cases of a similar illness from the ingestion of the same common food it is known as a food-borne disease outbreak (FSN, 2018). In order to avoid potential health hazards, food safety is very important. This needs safety between industry, market and the consumer. For food safety the labelling on food material is vital. This includes the origin of food, steps taken for food hygiene, food additives, pesticide residues, policies on biotechnology, food guidelines for the management of governmental import, export inspection and certification systems for foods. The food should be safe in the market with safe preparation and delivery of the food for the consumer. Foegeding et al., (1996) have done an assessment of risk factors with food borne pathogens.Warnock et al., (2007) have reported intervention to food safety.

When pathogens are in the food they may be transmitted to the consumer. It may result in an illness or death of the person or other animals. The pathogens include bacteria, viruses, molds and fungus. These multiply in the food medium. Joon et al., (2012) have found pathogenic bacteria in meat products of Korea. The developed countries have high intricate standards for the preparation of food; however, in the developing countries there are less standards and enforcement of the standards which are followed. Apart from food another major source of infection is water, which is very critical in spreading many diseases. It is possible to prevent food poisoning if good water is used for all purposes. However, it becomes difficult as in the food supply chain a large number of persons are involved apart from the fact that pathogens can be introduced into foods no matter how much precautions are taken. Cowden (2000) has studied the notification on food poisoning to improve health. Frenkel et al., (2015) studied the amount of wastes from food processing industries.

1.1 The 7 P’s Framework for Agro Industry

The marketing mix

Marketing mix refers to Set of airities that the organization was to promote (or) Market their component.

Updating the 4P’s

McCarthy classified various marketing activities into marketing. Mix tools of four brand kinds which he called the four P’s of marketing. [Product, Price, Place & Promotion]

The 4P components of marketing mix

Product: Refers to list of Products and Services that the organisation is involved in sol off eg-Brand name size , Service warranties etc.

Price: Price is determined by demand for the goods and the cost of the goods. Examples of various pricing strategies: introductory prices, sale prices, odd pricing etc.

2.1 Setting Business Goals and Objectives

Well-chosen goals and objectives point a new business in the right direction and keep an established company on the right track. When establishing goals and objectives, try to involve everyone who will have the responsibility of achieving those goals and objectives after you lay them out. To help you better understand how you can set goals and objectives, you first need a good foundation for what the two are.

Goals establish where you intend to go and tell you when you get there. They help improve your overall effectiveness as a company — whether you want to increase your share of the market, for example, or improve your customer service. The more carefully you define your goals, the more likely you are to do the right things and achieve what you wanted to accomplish in the first place.

Objectives are the specific steps you and your company need to take in order to reach each of your goals. They specify what you must do — and when.

Basic LabTechniques - This laboratory is intended to:

(1) Provide an introduction to basic techniques used in biology labs

(2) provide some experience with the equipment employed in future labs

2.1 Microscopy

The compound light microscope is a veryimportant tool in the study of biology. Typical compound light microscopes allow specimens to be viewed at 400 to 1000 times their actual size (total magnification is determined by multiplying the objective lens magnification by the ocularlens magnification). Thelight microscopeis made up of a system of lenses aligned in such a way thatallows magnification, as well as improved resolution. The resolution obtainable is also dependent on contrastin the specimen. Contrast can be adjusted with the iris diaphragm, located below the condenser lens,and can also be enhanced by the addition of stains to the specimen.

Scientific drawings of specimens observed under the light microscope are often used to provide a record of what was viewed. Proper scientific drawings should be neatly drawn,with smooth lines, in pencil (they should never be in colour). More than one cellshould be drawn to illustrate the cellularassociation to the observer(e.g.found singly or as part of a tissue). Labels should be added using straight horizontal lines to the right side of the drawing, and care should be taken with singular and plural forms of structural terminology. To demonstrate differences in density of specific structures, use stippling rather than shading. A figure caption thatindicates the specimen viewed, how viewed, and the to right side of the drawing, and care should be taken with singular and plural forms of structural terminology. To demonstratedifferences in densityof specific structures, use stippling rather than shading. Afigure caption thatindicatesthe specimen viewed, how viewed, and the magnification of the drawing is always necessary.

Equipment

1. Adjustable pipette.
2. 20-ml glass beaker.
3. Atomic Absorption Spectrophotometer.

ABSTRACT

The multi-sensor airborne geophysical survey was carried out over Nalgonda district, Andhra Pradesh, during the field season 2002-03, with an objective to locate potential areas for mineral exploration. The area comprises older metamorphic rocks of Peninsular Gneissic Complex of Archaeanage represented by gneisses, granite, amphibolite and banded magnetite quartzite. Leucocratic intrusive granite, extending over a length of about 40 km around Suryapet in NNW-SSE direction exhibits intense fracturing. Two sets of vertical to sub-vertical fractures have been noted in granite. Yellow stains observed in granite near fracture planes reveal the presence of secondary radioactive mineral encrustation. The ground magnetic and spectrometric observations indicated that the uranium mineralization is confined to these fractures in granite. Petrographic, ore-microscopic and scanning electron microscopic studies revealed evidences of metamict alteration surrounding monazite/apatite inclusions within biotite, and magnetite grains in granite. These studies also indicated evidences of discrete grains of uraninite / coffenite / pitchblende (containing Thand Ce). Chemical analysis of the rock samples (by NAA) collected from anomalous zone reveal high uranium concentration of the order of 1200 ppm, marked by high values of total Rare Earth Element concentration (800 ppm).

The leucogranites are characterized by high LREE and a negative Eu anomaly suggesting plagioclase fractionation. An ultramafic enclave near village Kutubsahipur shows highest concentration of both uranium (1240 ppm) and REE (890 ppm) analyzed by BARC and NAA Lab, GSI.

ABSTRACT

Coastal zones are credited for the important role they play in the economic, industrial and commercial activities of many countries. Starting from the early fifties of the last century, coastal zones have attracted greater attention from the earth scientists owing to the discovery of huge hydrocarbon deposits in the Persian Gulf, Africa and South America. In addition, coastal zones especially those bordering Precambrian Cratons house significant quantities of economically important placer minerals which are being explored and exploited vigorously. In the present paper, sedimentary basins located along the continental margins of Tamil Nadu state, their geology and hydrocarbon potential are discussed. In addition, an attempt has also been made to demonstrate the usefulness of remote sensing techniques in the exploration of this strategic mineral.

ABSTRACT

In Tamilnadu majority of the people are engaged in agricultural work and they mainly depend upon the water resources. But at present both surface and subsurface water has become deficient because of over exploitation. Since last few years, conventional methods were employed to improve the surface and subsurface water conditions. But these methods provide less accurate result and consume more time. So to improve the conditions modern tools, such as remote sensing and GIS are being used to identify the ground water potential zones in Tamilnadu. It provides accurate resulst and consumes less time.

A project was carried out in Gadilam lower sub basin which falls in the part of Cuddalore District, Tamilnadu. The IRS 1D imagery was collected and interpreted using image processing software and Geo media GIS Software in conjunction with collateral data to prepare Hydro geomorphology, land use, geology and lineament maps Field checks were made and transferred the field data on the base map. By application of overlay analysis of the above thematic maps, using GIS techniques, the recharge zones were identified.

The satellite image mosaic map of Gadilam lower sub basin was generated to identify ground water potential zones. Average monthly rainfall data for the past 50 years were collected. Using Remote sensing and GIS techniques, the thematic maps such as Geology, Geomorphology, Soil, Drainage, Land use, Lineament zones have been generated for this study. Geophysical survey was also conducted in various locations and the aquifer parameters were measured. Details related to land and water resources, cropping pattern, water levels and water qualities from PWD ground water division, land use and well censes data of villages from village Administrative Officer, tank details from PWD were collected and analyzed

After analyzing the various thematic maps, they were finally overlaid. Thus the groundwater potential zones of Gadilam lower sub basin was identified.

ABSTRACT

Due to complex hydrogeological conditions it becomes very difficult to prospect the ground water resources especially in drought prone areas where the water table is very deep. The interpretation of geoelectrical sounding curves also becomes ambiguous. A semi empirical method namely theinverse slope method [Shankar Narayan and Ramanujachari, NGRI] is widely used since it is simple to operate without standard curves etc and it gives fairly good results. In some Government organizations like PWD [Ground Water Department] and TWAD Board of Tamilnadu, this inverse slope method is widely used for ground water exploration. Based on this methodology, ample of bore well points have been recommended in complicated hard rock terrains and the success rate is found to be encouraging. The study area, Kavalpatti, of Palani taluk in Dindigul district is a crystalline rock terrain, where geological, hydrogeological and geoelectrical investigations have been carried out to explore the ground water potential zone for agricultural purpose. The bore well drilled to a depth of 32 m has yielded 370 lpm. The interpreted geoelectrical section has been correlated with the litholog of bore well. Some bore well statistics [bore well points recommended based on this method] has been furnished, which reveals that this methodology is encouraging.

ABSTRACT

Airborne geophysical methods are presently used all over the world to support mineral exploration by providing basic geological information to supplement existing geological maps. The popularity of airborne geophysics is due to its lower cost for unit of area surveyed, as compared to all other methods of exploration. South India has been extensively covered by high altitude regional aeromagnetic surveys jointly by GSI and NRSA, low altitude multi-sensor surveys by foreign agencies, viz. M/s. Parsons, U.S.A. (Operation Hard rock Project) and BRGM/CGG, France, on contractual basis for GSI and by GSI (Twin Otter surveys) in selected belts and low altitude aeromagnetic surveys by NGRI in the SW part of the Cuddapah basin and the adjoining crystallines. Integrated studies of geophysical (airborne and ground), geological and remote sensing data have greatly helped not only in augmenting the geological knowledge of the region, but also in identifying several metallic prospects/ deposits. The present paper illustrates several case studies in demonstrating the utility of aerogeophysical data in geological mapping (identifying lithologies, structures and basement characteristics) and locating metallic prospects/ deposits.

ABSTRACT

Kadayampatty Panchayat Union is situated in the northern part of Salem district, adjoining the Dharmapuri district of Tamil nadu. It lies between the latitudes 11°45’ -12°N and longitudes 78° -78°15’E in the Toposheet No.58I/1. The study area mainly consists of the rocks of late Precambrian age that are characterised by migmatitic gneisses, Ultramafic rocks and Pyroxenite. In this study an attempt has been made for demarcating groundwater techniques. Resistivity of rock formation varies over a wide range, depending on the material density, porosity, pore size and shape, water content, quality and temperature. In relatively porous, highly jointed and fractured formation the resistivity is controlled more by water content and quality with in the formation then by the rock resistivity. For demarcating groundwater potential zones in the Kadayampatty Panchayat Union water table analysis and ten Vertical Electrical Sounding (VES) followed by Schlumberger electrode configuration were carried out. The maximum depth of investigation was 150mts. The electrode spreads were generally in steps of five meters interval up to 50 mts and 10 mts interval up to 150 mts. VES location were selected with in the study area with respect to their topographic features. Inverslope method proposed by Sankaranarayan (1974) et.al has been used to evaluate the geoelectrical parameters in order to demarcate to potential groundwater zones for new dug well and bore well locations. The lithological interpretation reveals that the presence of a maximum of five geoelectrical formations in the study area viz. Topsoil, weathered zone, fissure and fractured zone, fracture basement and fresh basement. Howevers all five formations do not occur throughout the study area, as the maximum and minimum of geoelectric layers are four and three respectively. Similarly a thin geoelectric layer was observed in some places also. The comparatively high resistivity values with corresponding high values of thickness are indicative of a wide stretch of unweathered and unfractured fresh rock layers. A highly weathered (saturated) basement is indicated by the extremely low resistivity value. The depth to the fresh basement varies.

ABSTRACT

An integrated geological, hydrogeological and geophysical analyses have been made to delineate groundwater potential zones in the Omalur Panchayat Union, Salem district, Tamilnadu. Sarabanga river is a major stream originating from western slope of Shevaroy hills. The tributaries are essentially consequent types. They are ephemeral in nature and the flow is restricted to the monsoon seasons. The flows of the streams are controlled by lineaments. Low drainage density, stream frequency and low relief indicate relatively high recharges and low runoff. The main lithological units are unclassified gneiss, grantite, charnockite, younger ultramafic rocks and recent alluvium. Ten vertical electrical soundings (VES) were carried out using Schlumberger electrode configuration. The maximum depth of investigation was 150meters when the electrode spread was generally in steps of 5 meters interval up to 50 meters and 10 meter intervals up to 150 meters. The field data were interpreted with the help of inverse slope method. Inverse slope field graphs reveal that in most of the locations, the aquifer consistsof five layers and third and fourth layersare normally weathered and highly fractured layers. These layers have attained a thickness range from 10 to 60 meters at the Tholasampatti, Sikkampatti, Pagalpatti and Sakkaraichettipatti. Correlation between the result of the VES data and the well lithology will be very useful in evolving ground water potential zones. Bore wells, dug wells in this area are normally sinking type wells. It will receive water only from the weathered, fissured and fractured zones which act as a favorable layers zones for tapping groundwater.

ABSTRACT

Microalgae in general and Cyanobacteria in particular are considered to be ideal biotechnological tools for their importance in the production of food, feed, fuel, fertilizers, fine chemicals and pharmaceuticals and their role in pollution abatement. So far, only 20 strains of microalgae have been cultivated for industrial purposes. To make use of more such organisms, it is essential to first identify their biodiversity in the naturally occurring populations and establish their germplasm for further characterization. With this in view, a detailed survey was made to study the biodiversity of Cyanobacteria in the Veeranam lake soil microflora in the Cuddalore district of Tamil Nadu. Influence of physico-chemical parameters habitat preferences of these soil microalgae, and their light and Electron microscopic features have been documented. The selected species of Cyanophyceae were subjected to energy dispersive spectroscopic analysis (EDS). They were found to accumulate different elements such as Zn, P, Mg, Ca, Mn, S and N. Thus these observations would determine the chemical dialogue between the cell structures and role of the elements. Further, it gives the clue about the soil microflora growth requirements.

ABSTRACT

A watershed is a topographically delineated area that is drained by a stream system, i.e. the total land area above some point on a stream or river that drains past that point. The watershed is a hydrologic unit that often is used as a physical – biological unit and a social – economic political unit for the planning and management of natural resources. Remote Sensing (RS) and Geographic Information System (GIS) techniques can be used effectively to generate the land use/land cover for evaluating the changes in an area. Conventional methods of runoff measurements are not easy for inaccessible terrain of Tamilnadu. Remote sensing technology can augment the conventional method to a great extent in rainfall-runoff studies. In this study, SCS Curve Number technique modified for Indian condition has been used for generation of CN for an ungauged watershed. A sub watershed of Manimuktha watershed is considered as study area. The daily rainfall data of Virudhachalam rain gauge station is collected and used to predict the daily runoff from the watershed using GIS based Soil Conservation Service -Curve Number (SCS – CN) method (USDA, 1972). Monthly and annual runoff values are obtained from the daily runoff values of the watershed. Base map, Soil map and Land use map of the study area are prepared by using Remote Sensing data and Survey of India (SOI) toposheets. PC Arc/Info GIS software is used for analysis.

ABSTRACT

The present paper highlights the implication of geochemical strategic tools to choose suitable site selection on the coastal region. Geochemical tools and geomorphological survey have been also deployed to identify the suitable site. The geomorphology of the site A reveals enough fresh water accumulation was found and the two elevated crest and the adjacent trough (low land) with surrounding areas further support the fact. The water quality of this site exposes very good quality (< 200ppm TDS) and the dissolved major anions (HCO3, SO4, Cl) and cations (Ca, Mg, Na, K) concentration are well within drinking water standards. The soil samples are of medium to coarse sand nature showing high porosity (40 to 50%) with mica flakes acting as less permeable in nature. The water quality shows very good in nature and similar to Site A. The soil characters additionally proved good in porosity and permeability (SAR 1.5 to 2.1).

Abstract

The damages caused by the tsunami surge of 26, December 2004 could not be recuperated. There is no second opinion for the above statement as attested by the consequences of tsunami surge on the coastal landforms, human lives, properties, biological assets, etc., The attempt made to evaluate the damages caused by the tsunami surge along the study area divulges various factors regarding the response of the coastal environment to this weird phenomenon. Kanyakumari district witnessed the tidal inundation of 50 – 450 m, the least along Colachel and the maximum in Kanyakumari and Muttom coasts. Run-up elevations were seen even up to 6 m in Manakudi and Colachel coasts. In major parts, the beaches of the study area had endured lofty erosion of beach sediments. High occurrence of Casualty was reported in the Coasts of Colachel, Kotilpadu, Manakudi and Azhikkal. Similarly, loss of man-made structures were also observed to be high along the Coast of Manakudi, Colachel, Kotilpadu, Azhikkal and Muttom. Costly articles like boats, fishing nets, etc., were also damaged in Kanyakumari, Pallam, Muttom, Kadiapatanam, Kesavanputhenthurai and Colachel. The quality of water has also been found to be affected with high level of pH and TDS in the coasts of Manakudi and Colachel. Such Colossal damages in the area is attributed to its geo-position exactly at the receiving point of the diverted tsunami surge by Sri Lanka. Bathymetry also seems to have played a crucial role in determining the intensity and angle of the seismic wave propagation in the area.

Keywords: Tsunami, India, Damages in Kanyakumari, Evaluation, Map, GIS.

Abstract

The Car Nicobar Island is one of the several islands in Indian Ocean which was severally damaged by the Great tsunami on 26 December 2004. The great tsunami event caused massive devastation, in the form of loss of life and property in south and south East Asia. The objectives of the study are to assess the changes in the coastal features of the Car Nicobar Island using various indicators such as the tsunami height, run- up elevation, water flow direction, erosion, sand deposition and coastal subsidence. Andaman &Nicobar Islands are the summit of the submarine mountain range lying along the great tectonic suture zone extending from Eastern Himalaya to Sumatra and Lesser Sunda via Myanmar border and Arakan hills. The IRS P-6 satellite data has been found to be very useful in the present tsunami assessment studies. The digital analysis of the satellite data was done using the image processing software (ERDAS IMAGINE 8.4) and DTM to quantify the tsunami height (15 m), run up elevation (2-19 m), inundation (295-1203 m) and coastal responses. The settlements and coconut plantations have been severely damaged in the island, which were assessed using GIS analysis of the pre and post-tsunami satellite data.

Keywords: Tsunami, Wave Height, Run-up Elevation, Inundation, Coastal Responses, Remote Sensing, GIS.

Abstract

The mangrove wetlands form dynamic ecotones between land and sea. Mangrove wetlands are unique in terms of environment, plant and animal communities and their distribution is restricted in tropical and subtropical coastlines. They perform a number of protective and productive functions, which ensures ecological and livelihood security to the coastal communities. The role of mangroves in mitigating the impact of cyclones and storm surges is well known but only limited information is available on their role in reducing the impact of tsunami. The Pichavaram mangroves, located on the southeast coast of India in Tamil Nadu, which was hit by the 26 December 2004 tsunami, provided opportunities to understand the contribution of it in tsunami mitigation. Through a systematic field study, a comparative analysis was made on the impact of tsunami in a set of villages, one was protected by mangroves and the other lacks any vegetation surrounding it. These villages are located at more or less equal distance from the sea and situated at about same elevation. Assessment carried out with well defined indicators such as loss of lives due to forceful entry of tsunami water, damages to houses and types of houses, etc., shows that loss of lives and damage to houses were much less in the village surrounded by Pichavaram mangroves. Thus, Pichavaram mangrove wetland, which was restored with the participation of the local community, Tamil Nadu Forest Department and M.S.Swaminathan Research Foundation (MSSRF) during 1993-2004 provided great dividend during tsunami. This underlines the importance of strengthening the ecological foundation of the coastal zone with mangroves and other vegetation as one of the strategies for mitigating the impact of natural disasters in the coastal areas.

Keywords: Mangroves, Natural Disasters, Tsunami, Impact Reduction and Pichavaram.

Abstract

Cocoa and coffee are highly sought after commodity crops in the market owing to the distinct flavor and aroma characteristics. Cocoa beans are mostly used in the manufacturing of chocolates and various types of confectioneries while coffee is mainly consumed in the form of beverages. Both cocoa and coffee need to be dried and roasted in order to produce the flavor precursors which further develop into the desired flavor and aroma in the finished products. This chapter aims to provide an overview of cocoa and coffee processing with particular emphasis on drying and roasting aspects and its impact on product quality.

Natural disasters are of meteorological or hydrometeorological origin. Disasters such as earthquakes and tsunamis are occasional, but rainfall-related hazards, flood or drought, are very frequent and thus call for proper monitoring of large-scale rainfall variation, and better manage- ment and planning to combat the problem(s). Variation in rainfall is very large spatially and temporally compared to any other atmospheric parameter, such as pressure or temperature. The large temporal variability in the Indian rainfall has produced frequent flood/ drought and periods of above/below normal rainfall for several centuries past. Areas of high rainfall and runoff are flooded in the summer monsoon season whereas others face water stress and drought conditions. The influence of global warming on rainfall variations over India is reported in numerous observational (Singh et al., 1991, 1992) and modelling studies (Lal, 1994). Though considerable rainwater enters the Indian territory from the Himalayan area, the major hydrological activities and water resources of the country are due to in situ rainfall occurrences, mostly summer monsoon rainfall during June–September. During a normal hydrological wet season the country receives 2911.064 bcm (billion cubic metres) rainwater of which 1856.947 bcm evaporates and 1054.117 bcm enters into surface hydrological processes (surface storage, streamflow/riverflow and deep aquifer storage) (Ranade et al., 2008). Rainfall events display large spatial variability due to variation in intensity, frequency and geographical location of the rain-producing weather systems, such as circular systems (low, depression, tropical cyclone and mid-tropospheric cyclone), linear systems (trough, meander, squall line and convergence zone) and wave disturbances (easterly and westerly waves). Rainfall in other seasons is equally important to monitor, though restricted to some parts of the country, such as winter rainfall over the extreme north, summer thunder showers over the southwest peninsula and northeast India, and post-monsoon rainfall over the south peninsula.

Climate risk management in the semi-arid tropics (SAT) is one of the major challenges to achieving food security and development in India and large parts of sub-Saharan Africa and also in the case of Australia. Climate-induced production risk associated with the current season-to-season variability of rainfall is a major barrier in making rainfed agriculture sustainable and viable farm business. Since season outcomes are uncertain, even with the best climate information, farmers have limited flexibility in applying management with confidence. In fact in risky environments, farmers most often respond by adapting a risk averse strategy and are reluctant to invest in even risk reducing measures (Leathers and Quiggin 1991). In the SAT agro-ecologies, there are a limited range of enterprise or crop options to consider which may be further restricted by cultural traditions, food preferences or market opportunities.While there are fundamental differences between large scale commercial farms in Australia compared to the predominantly smallholder resource poor farms found in India, when it comes to climate risk management in the SAT, there are many commonalities. The purpose of this paper is therefore to (i) establish a framework for managing climate variability and transforming farming systems to be more resilient and sustainable for future climates; and (ii) provide some case study examples from climate risk management in low rainfall cropping system in Australia and consider how they may be applied in smallholder systems of the SAT.

The State of Andhra Pradesh in the present form came into being on June 2, 2014 as a result of the Andhra Pradesh Reorganization Act. The state has 13 districts out of which nine are along the coast of Bay of Bengal and four are land locked in the southern part. A part of Khammam district, which is now in the Telangana state, was also added to the East and West Godavari districts of the State of Andhra Pradesh. The existing data for these two districts do not include this part and this fact is to be borne in mind. The state has a geographical area of 1.602 lakh km² with a population of 49.83 million. The state in the current form is more agrarian compared to the undivided state as about 62 per cent of population depends on agriculture as a source of livelihood. Yet, the contribution of agriculture to the state’s gross domestic product is only 17 per cent. Though the state is known as ‘rice bowl of India’, not all is well with agriculture in the state. Some parts, especially the coastal districts, are prone to incidence of cyclones and floods while some other districts, Rayalaseema districts, are chronically drought-prone. The observation of ‘crop holiday’ when farmers chose not to raise rice in the two Godavari districts in the recent past is a pointer to the problems associated with agriculture in the state. Land degradation associated with indiscriminate use of chemical inputs, sea water ingression, inadequate and undependable rainfall is some of the major problems that cause low productivity of agriculture in the state. Imperfections in the market in terms of inadequate access to markets and market information, inadequacies in market and processing infrastructure are some of the major impediments to realizing the potential returns from crop and animal production. The rising cost of inputs is another detriment to the profitability of agriculture. Aggravating all this problems is the climate change that further brings in the urgency to put in place a variety of measures that help improve productivity and profitability of agriculture. Recognizing all these dimensions, even the strategy document on transforming agriculture in Andhra Pradesh laid emphasis on making agriculture climate smart (GoAP, 2014).

Importance of rice in Konkan area is characterized by heavy rains of 100 mm per week or so over an extended period and contributes 42.9 % of total rice production in the Maharashtra State. Rice is the only suitable crop that can be grown under puddled soil conditions, i.e. with standing water over bunded fields. Tansplanting method of rice is commonly followed by most of the farmers in this region. Puddled rice is said to be of assistance in mitigating the effects of floods. The problem of weeds is minimal in puddled rice culture. Thus, rice serves as a livelihood crop for millions of small, and marginal farmers in Konkan who can afford only low-cost technologies. Even though the crop is robust and versatile, it has faced drawbacks in terms of low yield and reduction in acreage. In Konkan region of Maharshtra, there are two agro climatic zones viz., North Konkan coastal zone comprising three districts viz., Thane, Raigad and Greater Mumbai and South Konkan Coastal Zone comprising two districts viz., Ratnagiri and Sindhudurg. Ratnagiri district receives the highest rainfall of > 3500 mm while Thane district receives the lowest rainfall (2000-2500 mm) in this region. Sindhudurg and Raigad districts receives 3000-3500 and 2500-3000 mm rainfall, respectively. It is generally observed that South Konkan districts record high rice yields in spite of low area while reverse in North Konkan districts. The district wise area and production of rice in Konkan region as the mean for the period of 1997-98 to 2014-15 revealed that, Thane occupies largest average area of 133822 ha under rice, while Raigad has the highest production of rice (308555 tonnes) and Sindhudurga district has the high productivity of 2.75 t ha^-1. The trends in area, production and productivity of rice for the period 1997-98 to 2014-15 shows significant decreasing trend in paddy area while in case of production and productivity the trend is increasing. Paddy area decreased from 425000 ha in 1997-98 to only 311300 ha in 2014-15, while productivity increased from 2.44 tonnes ha^-1 in 1997-98 to 2.88 tonnes ha^-1 in 2014-15. In this context, it is necessary to understand the agro meteorological constraints for improving the yield and simultaneously reduce the fall in cultivated area.

The Northeast Region (NER) of India consists of Assam, Arunachal Pradesh, Manipur, Meghalaya, Mizoram, Nagaland, Sikkim and Tripura, covering an area of 255168 km². The area is characterized by rich biodiversity, heavy precipitation and high seismicity. Although the contribution from agricultural sector towards gross domestic product has declined, yet it remains the predominant sector for Indian Economy. Over 75% of the people of NE India directly depend on agriculture for their livelihood. Therefore, better performance of agriculture has a direct and multiplier effect across the economy of the region. Because of climate change the rain fed agriculture is facing a greater risk as it is resource poor and having limited flexibility for adaptation. Under changing scenarios there is increase in demand for fresh water and nutrient requirement, increase in soil erosion and nutrient losses affecting soil health, intensification of pest, disease and weed problems, reduction in nutritional quality and low input use efficiency. Continuous mono-cropping and the associated excessive tillage, inadequate erosion control measures and large scale slash and burn cultivation (Jhum) resulted in significant environmental damage and a non-sustainable crop production system in the region. The Jhum or slash- and- burn cultivation is very much prevalent in the region. This practice involves reckless slashing and burning of forest area for cultivation leading to release of carbon dioxide and significant amount of other Green House Gases such as nitrous oxide. The intensive ploughing of the cleared mountain makes the land very much susceptible for erosion leading to soil degradation and loss of soil organic carbon. The climate change is likely to add more burden to already struggling agricultural sector of the state. The climate change is a concern to researchers and farmers because it would lead to change in insect and disease dynamics i.e. the distribution, abundance and management of insect and pathogens. Moreover, there would be increase and variation of livestock disease and adaptation, and decline in soil health. The magnitude of impact varies with geographic location and is tailored to local circumstances and ecosystems. The erratic rainfall trend in the recent past lead to the failure in planning proper water management techniques and also makes the prediction of disease outbreak difficult in this region. Agro- climatic conditions of NEH are conductive for the development and multiplication of insect pests and their natural enemies. Due to climate change rice insect pests continue to be one of the major constraints to rice production, which causes about 20% yield losses. Maize is the second most important crop in the region. It is primarily grown in the Jhum land and terraced area in NEH region. In moisture stress area, occurrence of cutworm (Agrotis flammatra and Agrotis segetum) was found very serious. The important pulses grown in the region are pigeon pea, cowpea, rice beans, rajamash, Bengal gram, mung bean, lentil, fababean and lathyrus etc. Due to favourable climatic conditions, pulse crop are infested with number of pests throughout the cropping season.

Natural disasters are extreme events within the earth’s system (lithosphere, hydrosphere, biosphere or atmosphere) which differs substantially from the mean, resulting in death or injury to humans, and damage or loss of valuable good, such as buildings, communication systems, agricultural land, forest, natural environment. They are a profound impact of the natural environment upon the socio-economic system (Alexander, 1993). This impact may be rapid, as in the case of earthquakes, or slow as in the case of drought. It is important to distinguish between the terms disaster and hazard. A potentially damaging phenomenon (hazard), such as an earthquake by itself is not considered a disaster when it occurs in uninhabited areas. It is called a disaster when it occurs in a populated area, and brings damage, loss or destruction. Natural disasters occur in many parts of the world, although each type of disaster is restricted to certain regions. Natural disasters are events which are caused by purely natural phenomena and bring damage to human societies (such as earthquakes, volcanic eruptions, hurricanes). Mitigation of natural disasters can be successful only when detailed knowledge is obtained about the expected frequency, character, and magnitude of hazardous events in an area. Many types of information that are needed in natural disaster management have an important spatial component. Spatial data are data with a geographic component, such as maps, aerial photography, satellite imagery, GPS data, rainfall data, borehole data etc. Many of these data will have a different projection and co-ordinate system, and need to be brought to a common map-basis, in order to superimpose them. We now have access to information gathering and organising technologies like remote sensing and geographic information systems (GIS), which have proven their usefulness in disaster management. Remote sensing and GIS provides a data base from which the evidence left behind by disasters that have occurred before can be interpreted, and combined with other information to arrive at hazard maps, indicating which areas are potentially dangerous. The zonation of hazard must be the basis for any disaster management project and should supply planners and decision-makers with adequate and understandable information. Remote sensing data, such as satellite images and aerial photos allow us to map the variabilities of terrain properties, such as vegetation, water, and geology, both in space and time. Satellite images give a synoptic overview and provide very useful environmental information, for a wide range of scales, from entire continents to details of a few metres. Secondly, many types of disasters, such as floods, drought, cyclones, volcanic eruptions, etc. will have certain precursors. The satellites can detect the early stages of these events as anomalies in a time series. Images are available at regular short time intervals, and can be used for the prediction of both rapid and slow disasters. When a disaster occurs, the speed of information collection from air and space borne platforms and the possibility of information dissemination with a matching swiftness make it possible to monitor the occurrence of the disaster. Many disasters may affect large areas and no other tool than remote sensing would provide a matching spatial coverage. Remote sensing also allows monitoring the event during the time of occurrence while the forces are in full swing. The vantage position of satellites makes it ideal for us to think of, plan for and operationally monitor the event. GIS is used as a tool for the planning of evacuation routes, for the design of centres for emergency operations, and for integration of satellite data with other relevant data in the design of disaster warning systems. GIS is extremely useful in combination with Global Positioning Systems (GPS) in search and rescue operations in areas that have been devastated and where it is difficult to orientate. The impact and departure of the disaster event leaves behind an area of immense devastation. Remote sensing can assist in damage assessment and aftermath monitoring, providing a quantitative base for relief operations. In the disaster rehabilitation phase GIS is used to organise the damage information and the post-disaster census information, and in the evaluation of sites for reconstruction. Remote sensing is used to map the new situation and update the databases used for the reconstruction of an area, and can help to prevent that such a disaster occurs again. The case studies of extreme weather events - floods due to cyclones, heavy rains and drought were presented hereunder.

Seed germination

It is defined as the emergence and development from the seed embryo, of those essential structures, for the kind of seed in question, indicates its ability to produce a normal plant under favourable conditions. The seedlings devoid of an essential structure; showing weak or unbalanced development; decay or damage affecting the normal development of seedling are not considered in calculating the germination percentage.

An Act to provide for regulating the quality of certain seeds for sale, and for matters connected therewith. It enacted by Parliament in the Seventeenth Year of the Republic of India.

1. Short Title, Extent and Commencement

• This Act may be called the Seeds Act, 1966.
• It extends to the whole of India.
• It shall come into force on such date as the Central Government may, by notification in the Official Gazette, appoint, and different dates may be appointed for different provisions of this Act, and for different States or for different areas thereof.

House plants play an integral role in providing decorative value and aesthetic sense to the place. They are important component of interiorscaping and provides softscape. House plants are also considered as natural air filters as they provide freshness and many house plants are reported to absorb many house pollutants. The demand of house plants are generating many employment opportunities like plant rental services, interiorscaping etc. The house plants are preferred in homes, offices, hospitals, multiplexes etc.

Placement

These attractive house plants rightly deserve their place as interior decorations. “Shade loving” is an adjective often used to describe house plants, but this is a misnomer, Plants may be shade tolerant but they do not actually seek poor light. Diffused light through the glasses or windows’ can be effective you can supplement the suns’ rays with artificial light in the form of a “warm white” fluorescent tube. Then may be shifting them after frequent intervals in the open for a short duration in morning hours to supplement the sunlight during winter months and leaving them out overnight and bringing them after exposing them to early morning sunlight during hot months exposure for a desired time frame in the monsoon are some of the effective methods to make your house plants feel happier.

Abstract

Grain size distribution patterns of five rivers – Hooghly, Bhagirathi, Damodar, Ajoy and the Usri, were critically analyzed and compared with three model distributions: log-normal, log-hyperbolic and log-skew-Laplace. The log-normal and log-skew-Laplace are the limiting distributions of log-hyperbolic family. The Hooghly-Bhagirathi river system from where the sand samples were collected is tidal in nature whereas the other three rivers are non-tidal. The tidal effect on grain size distribution patterns was also studied. Bed load samples were collected from the foreset of different bedform sizes. A total number of 126 sediment samples were collected from different sections of the rivers under study.

It is observed that the grain size distribution pattern of the tidal stretch of the Hooghly-Bhagirathi river system has a tendency of attaining a log-skew-Laplace distribution model whereas the other three non-tidal river sediments show a clear log-normal distribution pattern as a best-fit statistical model.

A possible reason has been attributed. During prolonged transport of bed material, the coarser and finer sediments are separated in the following manner: coarser sediments are buried below the advancing ripple fronts whereas the finer sediments are transported further downstream as suspension load. As a result, sediments of a narrow range of size classes are active in the distribution pattern giving rise to symmetric and unimodal distribution patterns which are the main criteria of log-normality. On the other hand, due to the upstream and downstream movement during sediment transportation in tidal reaches, the same sediments are constantly reworked and the segregation of different size fractions is hindered causing a log-skew-Laplace distribution pattern.

Pesticide Formulation

Pesticide formulation is the process by which the pesticide is put into a form which can be easily produced, stored, transported and applied by practical methods in order to achieve a safe, convenient economic and effective method of pest control.

When a pesticide active ingredient (a.i) is manufactured, it is not in a usable form as it may not mix well with water or may be unstable. Therefore, it is mixed with other compounds to improve its effectiveness, safety, handling and storage. These other compounds can include solvents, mineral clays, stickers, wetting agents, or other adjuvant. The mixture of a.i. and inert (inactive) ingredients is called a pesticide formulation. Some formulations are premixed while others must be mixed before use. A single a.i. is often made into several formulations.

Introduction

Humans are able to live and work in almost all the environmental extremes of the planet earth and also in space due to their remarkable physiological adaptability and/or by modification of environment itself. Adequate nutrition plays a key role in adaptation and accordingly nutritional needs vary to a great extent. Nutraceutical, a term combining the words “nutrition” and “pharmaceutical”, is a food or food product that provides health and medical benefits, including the prevention and treatment of disease. Such products may range from isolated nutrients, dietary supplements and specific diets to genetically engineered foods, herbal products, and processed foods such as cereals, soups, and beverages. Nutraceutical is a broad umbrella term used to describe any product derived from food sources that provides extra health benefits in addition to the basic nutritional value found in foods. Products typically claim to prevent chronic diseases, improve health, delay the aging process, and increase life expectancy. Phytochemical profile in important crops such as ber, aonla, pomegranate, date palm, karoda, bael, aloe vera, cactus pear of arid region have been indicated that there is wide variation among primary and secondary metabolites. Thus it has become imperative to look into markers linked to high contents of bioactive compounds rather than size and sweetness of the fruits during exploration and evaluation of the plant germplasm.

Introduction

Cactus pear belongs to Cactaceae family, is widely grown in Mexico and distributed in arid and semi arid tracts of several other parts of the world, such as Australia, Africa, USA and the Mediterranean basin and South East Asia. The future of arid and semi-arid areas of the World largely depends on the development of sustainable agricultural systems based on the use of appropriate crops. Suitable crops are those that successfully cope with water shortage, high temperature, variabilities, poor soils, and easy management to provide food and forage to poor farmers and herders. Opuntias fit most of the above described requirements. In addition, Opuntias play an important ecological role in combating desertification as well as producing fruits and vegetables for human consumption, forage or fodder for livestock, biomass for energy purposes, cochineal for carmine production, and numerous by-products (beverages, vegetarian cheese, drugs and cosmetics). They also provide shelter and food for various wildlife species in arid environments. The fruit known as tuna is a fleshy berry, varying in shape, size, and colour and has a consistent number of hard seeds. The fairly high sugar content and low acidity of the fruit makes it palatable and delicious. Cactus pear was largely treated as underutilized crop by the scientific world until the beginning of 1980, when there was a multiplication of research and symposia, resulting in a large number of publications, including books and book chapters. Recent research finding has, in fact, revealed the high content of some chemical constituents, which can give added value to this crop on a nutritional and bioactive profile. High levels of betalains, taurine, calcium, magnesium, and antioxidants are nutraceutically important. Moreover, some of the constituents show promising in terms of health beneficial quality. Cactus pear products could supplement to nutritional security and human health. The diverse genotypes of Cactus pear have different coloured fruit that show the presence of different antioxidants profiles.

An organic acid is an organic compound with acidic properties. The most common organic acids are the carboxylic acids, whose acidity is associated with their carboxyl group –COOH. However, sulphuric acids, containing the group –SO₂OH, are relatively stronger acids. Alcohols, with –OH, may also act as weak acids. Some other groups may also act as weak acids viz. thiol group and phenol group. In biological systems, organic compounds containing these groups are generally classified under organic acids. Some common organic acids are lactic acid, acetic acid, formic acid, citric acid, oxalic acid, uric acid, propionic acid and butyric acid. Organic acids have been used for decades in commercial compound feeds, mostly for feed preservation, for which formic and propionic acids are particularly effective. Since the ban of antibiotic growth promoters in many countries, organic acids have been used increasingly, not only because of their preservative qualities, but also for their nutritive properties. Organic acids and their salts are generally regarded as safe and have been approved by most member states of EU to be used as the feed additives in animal production.

Archaeobotany

Botany as far as it is relevant in archaeology mainly denotes all types of ancient organic material (in particular ancient plant remains) collected from excavation sites. The deliberate study of the interrelationship between humans and plants and the environmental context in which this occurred has been called archaeobotany.