eChapters

1. INTRODUCTION

When the fruits and vegetables are ready for the intended purpose, these have to be harvested. What is meant by harvesting and how the produce is harvested, what are the harvesting methods, how these are packaged in what type of packages have been discussed in this chapter.

2. HARVESTING

Harvesting of produce at proper maturity is of paramount importance for maintaining quality during storage and marketing. When the produce is harvested immature or over-mature, it will affect the quality and storage life adversely. After the proper maturity stage has reached, the produce needs to be harvested for various markets. While harvesting, it must however, be kept in mind that all horticultural produce (with the exception of some dry fruits/nuts) is very delicate and mishandling at harvesting may lead to mechanical injury, compression injury that is irretrievable. The injury on fruits/vegetables enhances ethylene production, moisture loss and serves as an entry point for a wide range of pathogens, hence causing quick loss in quality and storability of produce. The injury caused to the produce during harvesting not only spoils the commodity but also makes it unfit for long-term storage or long-distance transportation. Proper training to the labour engaged in harvesting on what to harvest, and how to harvest and the use of proper harvesting tools can reduce considerably the postharvest losses.

1. INTRODUCTION

Since vedic times, importance of fermented milk and its products was known but the major attention to probiotic and its health related benefits was gained after Eli Metchnikoff’s publication entitled “The prolongation of life” in 1908. Due to the awareness of the role of nutrition in health and well-being, improved knowledge of diet-related diseases, consumer demand for probiotic and prebiotic products has been increased in recent years. The link between diet and health is flourishing the market for health-embracing population and opens an opportunity for Food and Dairy Industries meet the demand of this market. Probiotics, constituting live micro organisms, have been incorporated into drinks, food products, supplements (tablets, capsules and freeze–dried preparations) and prebiotic products. Milk, milk based products, fruits and vegetables are rich in functional food components such as minerals, vitamins, dietary fibers, and antioxidants (phytochemicals). Application of probiotic bacteria in such products further enhances the nutritional value of the food product. Probiotic juices produced from fruits and vegetables have also been in consideration in recent years. The food market is being getting captured by pro- and prebiotic food products day-by-day. Even the agro-industrial by-products such as whey, wheat straw, rice straw, sugarcane bagasse, etc. are being explored for the economical and cost effective production of prebiotic molecules. Thus, this chapter gives a comprehensive overview of pro- and prebiotics and their market potential.

1. INTRODUCTION

Stone fruits belonging to family Rosaceae (sub family-Prunoideae) include several important fruit crops like peach, plum, apricot, cherries, nectarines etc. The World production of these stone fruits is approximately 45.49 million tones; out of which 39.61 million tones stone fruits are grown in Asia and India contributes 6.67 million tones of stone fruits annually. Among all the stone fruits Peach, Plum and Apricot production in world is 24.98, 12.05 and 4.11 million tones, respectively whereas India alone produces 287778, 261903 and 17862 metric tones of peach, plum and apricot, respectively (Table 1). These stone fruits are grown extensively in USA, Spain, France, Italy, Turkey, Morocco, Iran, Africa and Australia. In India, these are grown in J&K, Himachal Pradesh sub-mountainous tracts of Punjab, Uttarakhand, North East States and to the limited extent in the Nilgiris hills. Primarily, these stone fruits are used for table purposes or processed to prepare various types of value added products like jam, jelly, marmalades, preserves, baby foods, nectar, juices, squashes, concentrates, ready-to-serve beverages, wines and also processed into dried products.

1. INTRODUCTION

Food processing involves the use of wide range of unit operations and technologies to transform the raw, bulky and perishable food into more shelf-stable, palatable and marketable food products. Food processing is one of the most effective solution to reduce the wastages, improves the quality and safety aspects of food products, increase the food availability and marketability. Fruits and vegetables are considered as an integral part of any dietary system as these are rich sources of vitamins, minerals and dietary fibres. India is the second largest producer of fruits and vegetables after Brazil and China which contributes 10 % of world fruit production and 14 % of world vegetable production. Fruits and vegetables are more prone to spoilage as compared to cereals due to their nature and composition. The spoilage can be occurr at the time of harvesting, handling transportation, storage, marketing and processing that results in lot of wastage in the form of seeds, pulps, peels etc. Efficient management of these wastes can help in preserving vital nutrients of fruits and vegetables, and bringing down the cost of production of processed foods, besides minimizing pollution hazards. In India, processing of fruits and vegetables is extremely low as compared to the developed countries.

Biotechnology can help in the bio-processing of fruits and vegetables for the production of novel products having better sensory and nutritional qualities, improved shelf life. Bio-processes involve the use of different micro-organisms and enzymes along with modern biotechnological techniques like genetic engineering.

In any organism and biomolecules (enzyme, proteins, etc.), most biological activities could be seen only within a narrow environmental conditions. Therefore in order to carry out a successful experiment, from cell culturing to DNA sequencing or assessing an enzyme’s activity, one has to pay utmost attention in calculating correct reaction components.

A solution is defined as a homogenous mixture of solute and solvent. In this case the amount solute is less as compared to the solvent. It is not always necessary that solvent is liquid and solute is solid. There are several examples where solute and solvents are found in other physical states such as gas or solids. For example, carbonated water CO₂ is solute and water is solvent; and smoke is solution of different smoke particles (solute) in air (solvent). The concentration of solution is described as amount of solute in a given volume of solvent. Several ways are there to express the concentration of a solution, such as molarity, normality, molality, and ppm. In this chapter we would discuss the general terms used in making solutions and a brief introduction about buffer solutions.

Nucleic acid extraction from clinical samples is the first step to be followed in molecular detection of cancer. Nucleic acids are the starting material for all downstream molecular diagnostic tools. Quality of test results largely depends upon the quality of starting material. Thus utmost importance should be given to the extraction protocols to isolate good quantity and good quality nucleic acids from patient samples.

Basic principle: The basic principle of nucleic acid extraction is to disrupt cell membrane and nuclear membrane to release and precipitate nucleic acid in the solution. Following precipitation,removal of other cellular contaminates such as protein, lipids, polysaccharides etc is performed to obtain a good quantity and quality of nucleic acid.

7.1 Basic concept

What is DNA sequencing?

The genome of any biological organism is a sequence of nucleotides arranged in a specific manner. The nucleotides are chemically a base which usually exists in 4 different forms; Purine – Adenine (A) and Guanine (G) and Pyramidine – Cytosine (C) and Thymine (T). These four nucleotides make up an entire sequence of Deoxyribose Nucleic Acid (DNA) which is encodes the information of any cell in the form of a gene. The genome, therefore, is the complete set of all genes that is required to build and maintain that organism. DNA sequencing is the process wherein the precise order of these nucleotides along the gene is detected and analysed which includes any method or technology that assists in determining the sequence.

3.1 Introduction

Genetics deals with genes and cytogenetics with chromosomes that harbour genes. On the other hand, plant breeding strives to upgrade the genotypes of crop plants. So, the plant breeding methods should be based on genetic principles. Dear students, you should have clear understanding of genetics in broad sense so that you can appreciate the applicability of breeding methods. As I have already pointed out that you have been taught the course ‘Principles of Genetics and Cytogenetics’ in the first semester, only a brief discussion is followed for your review and better understanding.

3.2 Character

When we call ‘character’ or ‘trait’ in genetics, we mean any morphological, anatomical, biochemical or behavioural feature of an organism. For instance, flower colour, blooming period, leaf size, size of guard cells in stomata, vitamin C content, disease resistance etc. A single gene or a number of genes may govern the development of a character and, often it is influenced by the environment. Characters may be qualitative or quantitative.

15.1 Introduction

Plant breeding aims at developing genetically improved crop cultivars with economic benefits for small-scale and commercial farmers. Population growth, dwindling agricultural land and global climate change present increasing risk to crop production. Consequently, plant breeding aims to constantly develop crop cultivars with improved yield and quality and tolerant to drought, diseases and pests. Use of genetically improved crop cultivars and better management practices are among the best strategies to increase food production and meet a projected doubling of food demand in the next 40 years. Both the public and private plant breeding sectors face several constraints, including a shortage of professional plant breeders and breeding technicians, limited budget, inadequate facilities and lack of access to information. Successful plant breeding requires adequate infrastructural investment, in addition to the actual breeding activities. The benefits of plant breeding research and development can only be realized on a long-term basis because of the inherent nature of the crops and the eminent breeding procedures involved. Plant breeding involves two main activities, i.e., pre-breeding/ germplasm enhancement and cultivar development per se. These interdependent activities are the controlling factors that determine the pace at which cultivars are released timeously and consistently to farmers. The two phases, in turn, depend upon various factors, e.g., breeding goals, genetics and agronomy of the crop, breeder’s long-term objectives, availability of testing facilities and national cultivar-registration requirements. Despite these factors, there are certain clear steps and breeding procedures found in any conventional breeding programme. These include choice of parents, making crosses among chosen parents, and selection from recombined parents followed by extensive field testing of the candidate cultivars. Maintenance, multiplication and distribution of the seed are the ultimate stages of a breeding programme. Systematically outlined conventional breeding procedures, timeframes and estimated breeding generations are essential to objectively consider the ultimate timescales required to release new and improved cultivars of all crops. The information may assist plant breeding- students, educators, researchers, project advisors, administrators and funding agencies. Dear students, in this chapter we outline the timeframes of conventional breeding procedures of clonally (also called vegetatively) propagated, self-fertilizing (also called self-pollinated) and cross-fertilizing (also called cross-pollinated) crops.

17.1 Introduction

Self-pollinated vegetable, spice and ornamental crops may be heterogeneous. It is exemplified by landrace cultivars. They may have originated from single plant selections but have been grown over a long period of time. Landrace cultivars are a mixture of genotypes, perhaps because of breeders’ lack of appreciation of selection techniques to produce a pure line, spontaneous mutations, chance hybridization, or a combination of factors. Natural selection in landraces has resulted in a cultivar that is well adapted to the local environment. Depending on amount of human selection, differences among genotypes in a landrace cultivar may be small and inconspicuous. On the other hand, a lack of human intervention may mean that differences among plants in a landrace cultivar will be conspicuous. After years of self-pollination, individual plants are homozygous. Selection of such individuals would result in a true-to-type reproduction of their phenotype within the limitations imposed by the environment.

22.1 Introduction

Mutations are sudden heritable changes in the genotype of an organism. De Vries (1900) for the first time used the term mutation (mutare in Latin means ‘to change’) for the appearance of new types in evening primrose (Oenothera) plant. In 1901 he put forth the idea of producing mutations artificially for use in crop improvement. Alberto Pirovano (1922) was first to use X-rays and ultraviolet rays for inducing mutations in plants, but his work remained unknown. So, Muller (1927) became the first known to induce mutation in Drosophila fly using X-rays. Though Stadler (1928) had started working simultaneously on barley and maize and induced mutations, he was late in reporting mutation due to longer life cycle of these plants compared to Drosophila. Mutation may be gene mutation (the result of change in the nuclear gene or plasma gene) or chromosomal mutation (change in chromosome number, structure or chromosomal aberrations of various types).

1. Introduction

Women empowerment is critical to the process of community development as well as for economic growth. Gender budgeting is recognized as a distinctive technique of women empowerment that directly upholds women development through allocation of budgetary fund. It aims at bringing gender equality through allocation of public funds and affirmative action for under-privileged sections. In fact, the term gender budgeting has been explained differently by various authors. A comprehensive definition states “gender budgeting as a dissection of the government funds to establish its gender differential impacts and to translate gender commitments into budgetary commitments” (Sharp, Rhonda, 1999). It can be viewed as a mainstream application of gender in the budgeting process. It ensures gender assessment of the budget, including reorganization of revenue and expenditure to incorporate gender perspective at all levels of the budget process. Gender budgeting therefore deals with gender specific formulation of laws, policies, plans, schemes and programs by allocation of resources; implementation and execution; monitoring, review and its impact assessment. It analyses the government budget from a gender perspective to assess how it addresses the needs of women in the areas of health, education, employment etc. It uses the budget as an entry point and apply the gender lens to the entire process of programme implementation.

Public budgets have different effects on women and men, and describe the unequal distribution of power in society in terms of economic disparities, differences in living conditions and ascribed social roles. Gender budgeting aims to visualize the gender impact of budgets and to transmute them into an instrument for increasing gender equality. Gender budgets basically includes all types of governments at the national, regional and local levels.

West Bengal

In West Bengal, mangroves are present in Sundarbans, the large deltaic complex of three major rivers, the Ganges, Brahmaputra and Meghna, and 62% of total area is shared by Bangladesh and 38% by India. The Sundarban Biosphere Reserve (SBR), at the confluence of the Bay of Bengal covering an area of 9,630 km², lies between 21°40′N and 22°40′N latitudes and 88°03′E and 89°07′E longitudes, spreading in districts of South and North 24-Parganas in West Bengal, India. The major portion of SBR is designated as Reserve Forest, covering nearly 4260 km² and the area under mangrove vegetation is 2112 km² (FSI 2019). Compared to 2017 assessment there has been a decrease of 2 km² area of mangroves. The mangroves and their associates in the SBR exhibit great generic and species diversity and it is abode to rare and highly endangered flora and fauna, as well as, the only mangrove-tiger (Royal Bengal Tiger - Panthera Tigris tigris) kingdom in the world. Recognizing importance and uniqueness, the United Nations Educational, Scientific and Cultural Organization (UNESCO) declared the Indian part of Sundarbans as a ‘World Heritage Site’ in 1987, and also designated the ‘Sundarban Biosphere Reserve’ under the UNESCO Man and the Biosphere (MAB) program in 2001. Recently, Sundarbans has been declared as a Ramasar Site, considering ecological significance. Totally 33 true mangrove species belonging to 21 genera and 13 families have been identified in Indian Sundarbans. Among the mangrove species listed, Rhizophora apiculata, Bruguiera parviflora, Ceriops decandra, Kandelia candel, Aglaia cucullata, Excoecaria indica, Xylocarpus moluccensis, Xylocarpus granatum, Heritiera fomes, Scyphiphora hydrophyllacea, Brownlowia tersa, Nypa fruticans, Acanthus volubilis, Dolichandrone spathacea and Phoenix paludosa are under serious threat in Sundarbans (Kathiresan 2008; Gopal and Chauhan 2006). Particularly Heritiera fomes (locally called Sundari, from which Sundarbans derives its name), Nypa fruticans and Phoenix paludosa are declining rapidly due to the reduction of freshwater input (Gopal and Chauhan 2006).

Threats

There are sixteen threat factors have been identified from Indian mangroves (Kathiresan 2010). However, habitat conversion for agriculture and aquaculture activities, environmental pollution by upstream anthropogenic activities, Climate change processes (e.g. sea level rise; increasing frequency of cylones, etc.) are the major threat factors for mangroves. Mangroves are able to cope up with short-term oscillations and long-term fluctuations of climatic conditions, but the consequences of global climate change, such as increased extreme events, will have unprecedented effects on biota and threaten the resilience and recovery potential of the ecosystems (Harris et al. 2018; Sippo et al. 2018). Despite conservation measures, the mangroves still experience an annual loss of 0.2-0.7% during 2000-2012 and they remain the most threatened ecosystem of the world (Hamilton and Casey 2016).

Basics of effective oral presentation : Planning , preparing (Introduction, Body and conclusion), Delivery, Body language and Handling anxiety-Strategies for giving oral presentation

Oral presentation means delivering an address to a public audience. It also refers to public speaking and/or speech-making. It is a brief discussion of a defined topic delivered to a public audience in order to impart knowledge or to stimulate discussion. The skill in oral presentation is equally as important as effective writing. Almost every oral presentation contains an introduction, main body and conclusion like a short paper. Though it is a formal speech in nature or vocal performance to an audience, it may occasionally require adequate planning and thorough preparation in using one’s voice, body language and visual aids such as slideshows to present and illustrate the points more effectively and to achieve the desired results.

Body languages such as eye contact, facial expression, posture and gesture plays a significant role in oral presentation process. The proper use of the voice and the ability to adjust it to suit the slightest differences of meaning are also very important in oral presentation. In addition to correct pronunciation, variation in pitch and cadence, free from speech mannerism, fluency in delivery are also very important in oral presentation.

Meaning-Steps for individual presentation; Group presentation-Meaning-Stages of group presentation; Impromptu presentation.

A Presentation is the process of presenting a topic to an audience. It is typically a demonstration, introduction, lecture, or speech meant to inform, persuade, inspire, motivate, or to build good will or to present a new idea or product.

Individual Presentations allow a person to completely control the thoughts, ideas, and methods of presenting without outside influence. Individual presentations allow someone to work at their own leisure and pace.

The practice of showing and explaining the content of a topic to an audience or learner is known as presentation. A presentation is a process of offering for consideration or display.

Presentations can also be categorized as expository or persuasive. They can also be impromptu, extemporaneous, written, or memorizes. But it’s more important to focus on their purpose. There are three basic purposes for giving presentations:

Intellectual Property: Intellectual property is an intangible creation of the human mind, usually expressed or translated into a tangible form that is assigned certain rights of property. It includes, inventions, trademarks, industrial design and geographical indications.

Intellectual Property Rights: Intellectual property rights (IPR) are the rights given to people over the creation of their minds. They usually give the creator an exclusive right over the use of his/her creations for a certain period of time. It includes, creations of the mind: inventions, literary and artistic works, and symbols, names, images, and designs used in commerce.

ABSTRACT

World is suffering from coronavirus infection since the end of 2019. Corona virus disease spraying rapidly throughout the world from the beginning of 2020, for that cause it is declared as pandemic by WHO in march 2020. As no proper remedy found for this particular new disease till the date it is become oblivious to maintain social distancing and lock down. Due to the situation each and every sector including the education system totally stopped from March 2020. But we have to maintain the flow of education. Many of the educational institution of India promoted e learning for their students. To avoid coronavirus infection social contact as well as to carry out classes in regular manner, it is become necessary to promote e learning everywhere. But in India the situation is different because Steel we are a poor country where a good number of people do not have a smart phone even. There are many challenges in promotion of e-Learning during this coronavirus pandemic situation in India. In present paper we are going to discuss about some challenges in promotion of e-learning due to coronavirus pandemic situation.

ABSTRACT

The advent and implementation of Information and Communication Technology (ICT) in library operations changed the overall information scenario. The format of libraries, information resources and user expectations are completely changing. Similarly, the role of librarian is continuously changing in the digital era. No library can fulfill the informational demands of the users; hence, resource sharing is required between the libraries. Consortiums are developed to enable the institutions to access the rich and scholarly resources at an affordable cost. The present paper discusses the basic concept of resource sharing, consortium types, need, advantages and disadvantages and its role in sharing information.

Keywords: ICT, Consortium, Library consortia, Resource sharing.

ABSTRACT

This study addresses the many ICT-based services provided to readers as well as access to E-resources by Mahatma Gandhi Kashi Vidyapith, University users. It raises awareness of technology in libraries and why it is important to comprehend the usage of ICT in libraries in order to provide better library services and information to users. Essentially, the article describes several technologies and their applications in library operations. The study has discussed how library services are spurred by the use of technology such as OPAC, E-ShodhSindhu, E- books and E-journals, and so on. The current study examines several library activities that make use of ICTs. The goal of this paper is to demonstrate the use of various ICTs and E-resources by user of the university for rapid and easy information retrieval.

BSTRACT

This paper discusses the various issues and concerns about the electronic information resources, which includes mainly such as e-journals, e-books and e-databases etc. In this digital era, the library should be well equipped with trendy facilities & resources within the sort of books, manuscripts, technical journals, standards, conference proceedings, theses, reports, databases, and all the electronic versions of information resources. Various issues and concerns, which are related with the electronic resources and their management is discussed in detailed in this paper.

Keywords: ICT, Electronic resources, e-journals, Electronic resource management.

9.1. Fungi useful against plant disease pathogen

9.1.1. Trichoderma viride

Trichoderma viride (Fig. 231) fungus is used as a bio-fungicide. It is used for seed and soil treatment for suppression of various diseases caused by fungal pathogens. It is also a pathogen in its own right,causing green mould rot of onion.

The fungicidal activity makes T. viride useful as a biological control agent against plant pathogenic fungi. It has been shown to provide protection against pathogens like Rhizoctonia, Pythium and Armillaria.

It is found naturally in soil and is effective as a seed dressing bioinoculant in the control of seed and soil-borne diseases including Rhizoctonia solani, Macrophomina phaseolina and Fusarium species. When it is applied to the seed, it colonizes the seed surface and kills not only the pathogens present on the cuticle, but also provides protection against soil-borne pathogens.

1. Which one of the following is the botanical name of dill
   1. Cuminum cyminum
   2. Trychospremum ammi
   3. Apium graveolens
   4. Anethum graveolens
2. The normally in cardamom could be seen in
   1. Throughout year
   2. 4 month
   3. 6 month
   4. 2 month
3. The hortus malabaricus is written by
   1. Ravindran
   2. Subramniyan
   3. Hendrick Van Rheede
   4. Venugopaln Nambiyar

1. Ginger rhizomes peeled and soaked in lime water is called as
   1. Garbled
   2. Bleached ginger
   3. Non garbled
   4. Unbleached ginger
2. Harvesting period of cardamom is
   1. October to November
   2. June to July
   3. December to January
   4. March to April
3. Which of following month is flowering period in black pepper
   1. July – August
   2. May – June
   3. November – December
   4. January – February

1. Which round of plucking done in tea plantation
   1. 10 – 15
   2. 20 – 25
   3. 45 – 50
   4. 30 – 40
2. The method of oil extraction from fresh coconut was developed by
   1. CFTRI
   2. IARI
   3. IIHR
   4. CPCRI
3. The fresh arecanut fruits are preserved in thick layer of made and this product referred to as
   1. Bura tamul
   2. Chali
   3. Clay preserving
   4. Mud preservation

1. Atropa belladonna contains which alkaloids is
   1. 1-hyoscyamine
   2. N-methyl-puridine
   3. Atropine
   4. Pyridine
2. Withania somnifera is commonly known in english
   1. Belladonna
   2. Liquorice
   3. Blue cherry
   4. Winter cherry
3. Botanical name of black nightshade is
   1. Solanum tarvum
   2. Solanum xanthocarpum
   3. Solanum nigrum
   4. Solanum viarum

1. Liquorice is propagated by
   1. Seeds and stem cuttings
   2. Root cuttings and stem cuttings
   3. Seeds, root cuttings and stem cuttings
   4. Seeds alone
2. Belladonna plants will be ready for planting in main field when they attain a height of
   1. 15 – 20 cm after 8 – 12 weeks
   2. 15 – 20 cm after 2 – 4 weeks
   3. 4 – 8 cm after 8 – 12 weeks
   4. 40 – 45 cm after 8 – 12 weeks
3. The cinchona seeds germinate in ___ days after sowing
   1. 60 – 65
   2. 5 – 10
   3. 20 – 40
   4. 10 – 15

1. The average dry yield of gymnema is
   1. 2 – 3 kg/plant
   2. 5 – 6 kg/plant
   3. 20 – 25 kg/plant
   4. 10 – 12 kg/plant
2. Isabgol will be ready for harvest in
   1. 80 – 90 days
   2. 60 – 70days
   3. 140 – 150 days
   4. 110 – 130 days
3. The liquorice uprooting in the month of
   1. November – December
   2. February – March
   3. August – September
   4. June – July

1. The economic part of bursera is
   1. Root
   2. Leaves
   3. Stem and root
   4. Berries
2. Oil yield of thyme is
   1. 62 kg /ha
   2. 21 kg /ha
   3. 35 kg /ha
   4. 11 kg /ha
3. The oil yield of anise is
   1. 15 kg/ha
   2. 5 kg/ha
   3. 25 kg/ha
   4. 50 kg/ha

Biotechnology is defined as a set of tools that uses living organisms or parts of living organisms to make or modify a product, improve plants, trees or animals or develop microorganism for specific uses. Agricultural biotechnology is the term used in crops and livestock improvement through biotechnology tools. Biotechnology encompasses a number of tools and elements of conventional plant breeding techniques, bioinformatics, microbiology, molecular genetics, biochemistry, plant physiology and molecular biology.

Diagnostic Symptoms

• Practically all above ground parts are affected, but stalks are the main targets of stack.

• Spindle leaves (third or fourth) starts drying.

• Further stalks becomes discolored and hollow.

Diagnostic Symptoms

• Intially chlorotic (yellowed) lesions and sometimes galls appeared on the upper leaf surface.

• There are corresponding white blister-like dispersal pustules of sporangia on the underside of the leaf.

Anthracnose

Colletotrichum gloeosporioides (Glomerella cingulata)

Diagnostic Symptoms

• Disease produces symptoms like leaf spot, blossom blight, withertip, twig blight and fruit rot

• Symptoms on leaves show as gray to brown spots with dark margins and a yellow halo. The spots later enlarge and coaleasce to form sizable necrotic areas.

Scab

Ventruia inaequalis (Spilocaea pomi Fr?)

Diagnostic Symptoms

• Symptoms generally noticed on leaves and fruits.

1 Deficiency of which of the following trace minerals leads to parakeratosis of skin in pigs

a) Zinc b) Copper

c) Cobalt d) Iron

1 Goose stepping gait is observed due to deficiency of

a) Biotin b) Pyrodoxin

c) Pantothenic acid d) Niacian

1 The system that is most susceptible to hypoxia is

a) Respiratory System b) Cardiovascular System

c) Nervous system d) Digestive system

1 The focal point of any disease investigation in animal is making of

a) Treatment b) Diagnosis

c) Management d) Prognosis

1 Hypoxia caused due to defective oxygenation of blood in pulmonary circulation

a) Anoxic anoxia b) Anaemic anoxia

c) Stagnant anoxia d) Histotoxic anoxia

1 Ovine ketosis is more common during

a) Early lactation b) Late Pregnancy

c) Early Pregnancy d) Late lactation

1 Hepatosis dietetica in swine is caused by

a) Deficiency of vitamin-E & Se

b) Feeding of high energy diet

c) Excess of unsaturated fatty acid in the diet

d) Deficiency of vitamin A

Solid wastes are all the wastes arising from human and animal activities, that are normally solid and that are discarded as useless or unwanted materials. It consists of the highly heterogeneous mass of discarded materials from the urban community as well as the more homogenous accumulation of agricultural, industrial and mining waste.

Spleen is an elongated solid organ located on the left side along cranial and ventral abdominal wall. The size of spleen is variable in dogs. The spleen is larger in German Shepherds and Greyhounds. In cats the spleen is smaller and has fixed size. It is parallel to greater curvature of stomach within greater omentum. The position of spleen in dogs is variable as it is only attached by gastrosplenic ligament.

A. Define/Explain the followings

1. Mutation: Sudden heritable change in the phenotype of an individual.

2. Macro-mutations: Mutations with distinct morphological changes in the phenotype are called macro-mutations. Such mutations are found in qualitative character and, therefore, are also called oligogenic mutations.

The genetic information which makes up the genes of higher plants is stored in DNA sequences of the nuclear chromosomes and the organelle genome. There is such an enormous amount of DNA in higher plant cell, that no two organisms are likely to be identical in DNA base sequence. 

Q. 1 The amount of heat required to raise the temperature of 1gm milk by
one degree celsius in comparison to water is
(A) 85 %     (B) 93 %
(C) 107 %    (D) 100 %

Geographic location of India is in Northern hemisphers and located between 80 4' & 370 6' N latitude and 640 7' & 970 25' E longitude. Extent of area is 329 M Ha or 329 x 104 Sq.Km or 3.29 MSq.Km. The physiography of India can be broadly grouped into triangular plateau, mountains, Indo-gangetic plains and islands. India is divided into twenty agro ecological regions and sixty five agro ecological sub regions as per NBSS and LUP. Agro ecological regions( AER) is referred to identification and demarcation of land units having comparable landform, soils, bioclimatic conditions and the length of growing period (LGP).

Introduction

Mineral imbalance in the animal body produces several problems. Normal dairy animals experience constantly changing nutrient demands and environmental stress during pregnancy and lactation. In the first part of the cycle the negative balance must be held to minimum, later the reserves must be replenished through fine tuned nutritional support for optimum production of the dairy animals. Inadequate blood calcium (Ca), phosphorus (P), magnesium (Mg), or potassium (K) concentrations can cause a dairy animal to lose the ability to rise to her feet as these elements are necessary for nerve and muscle function and are therefore of particular concern in the newly calved dairy animal. Mechanisms for maintaining blood status of these elements concentrations perform efficiently most of the time but occasionally these homeostatic mechanisms fail and metabolic diseases such as milk fever occur. Understanding about cause and predisposing factors behind the same may be helpful to develop strategies to avoid these disorders.

Macro elements have a significant role in normal functioning of the body, including proper reproduction and production. Imbalance of these elements in the body of a peri parturient animal creates severe problems to the animal body and even the productivity of the animal gets seriously affected. Among the macro elements calcium, phosphorus and magnesium with cation-anion balancing elements (sodium, potassium and chlorine) play an important role in normal health of dairy animals during the parturition period.

Introduction

"The new science of nutrigenomics teaches us what specific foods tell your genes. What you eat directly determines the genetic messages your body receives. These messages, in turn, control all the molecules that constitute your metabolism: the molecules that tell your body to burn calories or store them. If you can learn the language of your genes and control the messages and instructions they give your body and your metabolism, you can radically alter how food interacts with your body, lose weight, and optimize your health." (Mark Hyman 2006).

Nutrients have long been considered merely as fuel or cofactors however, it is accepted that diet and feeding strategies play an important role in determining the basic physiological processes that influence the health and wellbeing of animals and ultimately influence the efficiency of production. Traditional research related to animal nutrition mainly deals with either deficiency or excess of the particular nutrient which affects their health and productivity. Subsequently, it was appreciated that nutrients can themselves participate in the regulation of metabolic pathways, for instance through the allosteric regulation of specific enzymes, or by modulating hormone secretion. Shifting of balance between health and disease states involves the complex interplay of genes and the environment, which includes nutrients. The use of systems biology approach in nutrition has attracted both scientists and industrialists during recent decades and a link between diet and health is well established. However, it has often been difficult to easily evaluate the effects of specific nutrients, combinations of nutrients and nutrient interactions because of the lack of straightforward biological indicators that respond to even the simplest changes in nutrition or nutritional status.

6.1 List Introduction

1. List is a collection of different values or different types of items.

2. Unlike array in c/c++/java a list is capable of storing different types of values under one roof.

3. The items in the list are separated with the comma (,) and enclosed with the square brackets [].

4. List provides us the facility to store multiple types of in a single unit.

Example:

a=[“ram”,1,“shyam”,12.5]

b=[1,2,3,4]

a[0]=ram

a=[“ram”,1,“shyam”,12.5]

print(a)

print(a[0])

ram