eChapters

Introduction

Coastal zone represents a broad transitional zone between land and sea which is strongly influenced by both the shoreline ecosystems and the near shore sub-littoral land-based ecosystems. The coastal areas of the country occupy about 10.8 million ha of land and are spread over the 7517 km long coastline along the Bay of Bengal in the East coast, Arabian sea in the West coast and two islands territories. The coastline of the country in its journey covers 9 states (West Bengal Odisha, Andhra Pradesh, Tamil Nadu, Kerala, Karnataka, Maharashtra, Gujarat Goa) 2 union territories (Puducherry and Daman and Diu) and 2 groups of islands (Andaman & Nicobar group in the Bay of Bengal and Lakshadeep and Minicoy group in the Arabian sea) in the country. The region has varied geomorphic and topographical features of mountains, valleys, coastal plains, riverine systems climatic conditions, soil conditions, water budgets and a wide range of cultivated crops. It also supports diverse vegetation ranging from rich tropical rain forests to coastal mangroves and highly rich in biodiversity. The entire coastal ecosystem is highly fragile and vulnerable to climate change and highly endangered by the sea level rise following global warming. Agriculture is the major occupation of the people in the rural areas of coastal regions of the country but it is highly complex risk-prone and entirely dependent on the vagaries of nature.

Since, the problems of coastal agriculture are widely variable there is no universally applicable remedial measure for self-reliant coastal agriculture and it is likely that the remedial measures or the technological interventions will be variable according to the problems associated with the concerned area. It is highly necessary that technological improvement aimed at enhancement of the productivity of coastal agriculture and the livelihood of the farming communities must be simple in use to suit the skill and resource poor farmers and, to be operative at small scale farming as the majority of the farmers are in marginal and small categories with very poor landholdings.

In conventional breeding for genetic upgradation of yield and other desirable attributes of crop plants, favourable assemblages of genes from two or more parents are made to develop a commercial variety. The important steps of this exercise are: locating the right kind of parents that possess the desired characteristics; making crosses between or among them; handling the segregating generations in an appropriate manner so as to identify the required recombinants; stabilizing the recombinants and finally evaluating their performance in a series of trials. This approach has been very successful in the sense that it has provided increments in productivity continuously. In an analysis done by the American Society of Agronomy on the genetic contributions to yield gains of five major crop plants, it was concluded that sorghum yields increased due to genetic improvements at the rate of 1.2 per cent per year between 1950 and 1980. For corn, the corresponding yield increase was 90 kg/ha/year between 1930 and 1980, which is equivalent to a rate of increase of 1 per cent per year. It was also estimated that 70 per cent of the total gains in corn yields are attributable to genetic improvement and 30 per cent of the yield gains are due to non-seed inputs like fertilizers, pesticides and cultural practices.

In India also, the improvement of productivity of the major food, fibre and several cash crops has been very impressive. The success is due to intensive research in plant breeding resulting in the evolution of varieties with very high genetic yield potentials and the concurrent support from other disciplines that has provided the package of practices which help in the realization of the created potential. In all crop plants, where the breeding efforts have been intensive, the phenomenon of plateauing of yields has become apparent. Wheat provides, perhaps, the best example of the situation. Since the 1970s, when the gains from genetic restructuring of the plant type had been established, major yield increases have not occurred. Since the demands of the future will be undoubtedly much larger, and additional cultivable land will not be available, ways will have to be found for a sizable increase in productivity per unit area in the immediate future. This requirement calls for the development of strategies and procedures that will make dramatic yield gains possible. For meeting the challenge, a continuous search is being made for innovative methods which will give yield increments of a much higher order than those provided by the conventional approach. In this chapter, an attempt has been made to introduce some such promising approaches.

Introduction

In a world grappling with the effects of unchecked waste generation, the pursuit of sustainable waste management solutions stands as a paramount challenge (Smith, 2020). In India, agriculture has evolved in its own way, it has sustained livelihood of millions and had transformed from being a food deficit country to a food exported. There were certain accelerated efforts taken in implementation of advanced resources and technology which transformed India to a self- sufficient country. However this irrational application of synthetic inputs has come with a cost,which resulted in generation of substantial amount of waste. Waste can be any residual substance which has lost its value to the original user after a certain period of its utilization(Gupta, 2019). Agricultural waste are the materials that are generated during or after farming activities which either have no use in the original process of production or may have been spoiled or left unused in the right time in certain cases. These waste that are generated during farming can be in solid,semisolid or liquid forms depending on the nature of farming activities. If these agri-wastes are left without proper treatment, they may have certain types of impact on the environment,for instance the pesticide residues may impact the grazing animal health and when the fertilizers volatize and leach causing an ill-effect on the aquatic ecosystem (Yadav, 2019). Certain Agri experts had opinion that these farm residues can be recognized as “resources out of place” instead of byproduct. The holistic management of farm resources with appropriate techniques can help in reutilization of the farm wastes in secondary production sectors thus minimizing resource utilization and intensifying work efficiency.

Introduction
Currently, about 350,000 species of flowering plants have been described under global flora, but only a few of them have been rigorously screened for plant breeding parameters and systematic research accomplished in terms of varietal development. According to the Great Medical Encyclopaedia, medicinal plants are those used as a source of raw material for preparation of medicinal products of natural origin. Medicinal and aromatic plants occupy a pivotal position in the socio cultural, health care and spiritual arena of rural people of India. Medicinal plants contribute significantly to the rural livelihoods for their sustenance and income generation. Medicinal and aromatic plants are being used since ancient time for the treatment of many diseases in traditional and recognized systems of healthcare and for therapeutic, fragrance and flavoring products in pharmaceutical and cosmetic industries besides as sources of natural dye, fat, essential oil, biopesticide, resin, protein, vitamin, condiment, spice, timber, fiber and other useful substances. Medicinal and aromatic plants-based livelihood systems are often mediated by the market forces and/ related directly to employment and income of the poor people.
Based on the research work carried out by International Development Research Centre (IDRC) in South Asia, MAP and other biodiversity-based livelihoods can not only become poverty alleviating but also been made socially equitable and gender balanced. According to the World Health Organization, 80% of people from developing countries depend mainly on traditional medicine for primary health care. India is one of the worlds’ richest sources of medicinal plants comprising of nearly 45,000 species, of which nearly 100 species find major commercial use as per the statistics of National Medicinal Plant Board, New Delhi. In 2017, the estimated global market value of herbal medicine and herbal supplements was in the region of $107 billion (Yao et al, 2019), and not surprisingly, the substantial demand and consumption of these products have resulted in shortages, and in some cases even the exhaustion, of several medicinal plant resources, leading to habitat destruction and the loss of genetic diversity.
Plant secondary metabolites specific to each medicinal herb are derived from the precursors obtained from the primary metabolic processes related to one plant species or related group of species. These metabolites protect plants against plants being eaten by herbivores or being infected by microbial pathogens. They serve as attractants for pollinators and as agents of plant-plant competition and plant microbe symbioses. The rise of chemical taxa of medicinal and aromatic plants can be considered as consequence of biochemical and metabolic processes mostly under genetic control. It is assumed that differentiation of cell is mostly manifested in chemo-differentiation at a molecular level and the fundamental differences of protein present in an organism, between different enzyme systems. Moreover, the identity of a medicinal plant is attributed to the dissimilarities in their metabolic profiling intra specific chemical adaptations influenced by the ecological and geographical conditions. This discrete chemical difference is known as poly chemism that occur in autogamous species like medicinal and aromatic plants

Rajasthan is the largest state covering about 34.2 million hectare geographical area of the country, of which 27.1 million ha (79 %) is under arid and semi-arid sub-tropic hot climate and spread over 21 districts. The land-scape of Aravali range provides boundary for arid western, semi-arid eastern and sub-humid to humid areas of the state. In-spite of several environmental restrictions and bio-physical constraints in most of the parts, the state can be classified into three distinct agro-climatic region i.e. hot arid, semi-arid and sum-humid from horticultural perspective. On the basis of research experiences and SWOT analysis over last two decades for R&D road-map of Rajasthan Horticulture, the classified zones have excellent vegetable development potential with wide and varied opportunities of crops and utilization of resources.

Introduction

Food habit of Indian people is mostly cereal based and depends on Rice, Wheat and Maize for their staple food. Although, there are thousands of indigenous plant species which are rich in nutrition and locally or regionally adapted and accepted but not included in the modern food systems. Presently, food security is largely dependent on a handful number of crops. Modern agricultural systems promote the cultivation of high-yielding crop species, with the intensification of a limited number of species.

Introduction
The Directorate of Extension Education, came into existence during 1967 under Odisha University of Agriculture and Technology. This directorate is engaged with various projects viz: University Extension Block Programme, Distance Education, Digital Extension, Information wing, Gender resource center, Educational Museum besides managing 31 KVKs in 28 districts of Odisha except Cuttack and Khordha district in which University Extension Block Programme and Farmers FIRST program is in operational. This directorate adopted several innovative extension approaches which made the OUAT KVKs unique in operational modalities and effective in delivering for the development of farming community in Odisha, some of the innovative approaches are: Development of KVK Action Plan, CoE on FPOs, R-E Linkage and Krushi Samrudhi helpline.
Development Process of Action Plan
Krishi Vigyan Kendras work as a knowledge resource center in agriculture and allied field for the district (Singh et al., 2012) where in, production and supply of critical technological products, both tangible and intangible is the major component other than having scientifically maintained demonstration units, crop cafeteria etc. Development of complete feasible action plan of KVKs requires sincere efforts in identifying the real problems on one hand and sourcing the frontline technologies on the other. The logical fitment of suitable technological options for testing, in addressing situation specific problems are also an important activity requiring our understanding of the major farming systems in the AES, micro-farming situations of different crops & commodities and our scientific orientation. For this OUAT adopts a uniform action planning process since last few years which involves different activities.
1. Identifying the problems
2. Prioritizing the problems
3. Analyzing the problems and finding root cause(s) of the prioritized problems.
4. Sourcing alternative technologies and listing possible solutions nearer to hit the root cause and address the problems.
5. Taking into consideration the follow up activities require to be undertaken for previous year OFTs and FLDs
6. Planning interventions including those for other extension activities, production of critical inputs etc.
7. Consolidation of interventions and finalization of action plan with respect to OFT, FLD, Capacity building, other extension activities or combination of these.

Introduction

Agricultural residues encompass the byproducts that arise from the cultivation and processing of unprocessed agricultural commodities, such as fruits, vegetables, meat, poultry, dairy products, and crops. These residues are the leftover outputs that do not function as main products and may contain substances that have potential benefits for human use. However, their economic value is lower than the cost incurred for their collection, transportation, and processing for beneficial purposes. The composition of agricultural wastes varies depending on the specific agricultural activities and systems utilized, and they can exist in various forms, including liquids, slurries, or solids. Agro waste, which is another term for agricultural waste, encompasses a range of materials such as animal waste (including manure and animal carcasses), waste from food processing (where only 20% of maize is preserved and the remaining 80% is discarded), crop waste (including corn stalks, sugarcane bagasse, and discarded or imperfect fruits and vegetables), as well as hazardous and toxic agricultural waste (such as pesticides, insecticides, and herbicides). Although there is a scarcity of estimates regarding agricultural waste generation, it is widely recognized that they make a significant contribution to the overall waste volume in developed countries. The proliferation of agricultural production has inevitably caused a surge in the volumes of livestock waste, agricultural crop residues, and by-products from agro-industries. If developing countries persist in intensifying their agricultural systems, a substantial increase in global agricultural waste is foreseen. It is estimated that about 998 million tonnes of agricultural waste is produced yearly (Agamuthu, 2009). In any agricultural setting, the accumulation of organic wastes can constitute a significant portion, reaching up to 80 percent, of the overall solid waste generated. Specifically, the production of manure can contribute up to 5.27 kg per day for every 1000 kg of live weight, considering the wet weight basis.

Trends in aquaculture and fisheries

Global fisheries have made rapid strides in recent years by establishing its strong hold over increasing food supply, generating job opportunities, raising nutritional level and earning foreign exchanges. These benefits become more important when placed in the context of current challenges in food production, nutritional security, social transitions and growing climate uncertainties. Fish and fishery products are the most traded food commodities in the world accounting for 1% of world merchandise trade in value terms representing more than 9% of total agricultural exports all over world (FAO, 2014). About 38% of the global fish production enters international trade in various forms and shapes, generating an export earning of nearly US$148.1billion with a record import at US$140.6 billion during 2014. Mostly the developing countries that account for over 60% of global fish catch, which has continued to expand at an average annual rate of 8.8% (FAO, 2009 & 2012) and play a major role in the global trade of fish and fish products contributing around 50% of fishery exports in value terms and more than 60% in quantity terms supplied by them (World Bank, 2011). At the same time, demand for fish products are likely to rise as a result of rising populations that are expected to reach 9.3 billion by 2050. Developing countries have a positive trade balance due to their increasing involvement in global fisheries trade. Developing country like India may have higher proportion of population growth but its impressive economic growth over the past two decades has resulted in steady increase in per capita income in real terms that in turn increases the purchasing power of people resulting in increasing demand for food to feed & ensure nutritional security of the population. As a result of which it brought inconsistency in fish consumption pattern across the coastal, marine and hill region.

Introduction 
The agriculture scenario has evolved considerably over the years. In the present context, consumers need diverse, safe and nutritious food which calls for a major reorganisation of the agricultural value chains to support transformation from the traditional production-oriented supply chains to demand-based approaches. Trade liberalization has further intensified competition by exposing farmers to both domestic and international markets, compelling them to meet elevated standards in terms of product quality and pricing. Therefore, the primary focus should be on enhancing technical expertise, managerial capabilities and access to timely information to enable smallholder farmers not only to strengthen their livelihoods but also enhance their marketing skills amid the fast-evolving global economic landscape. Access to true information is equally essential for addressing growing challenges related to natural resource degradation and climate change. Extension in Indian context, play a vital role in bridging the knowledge gap between research institutions and farmers by providing a range of advisory amenities and facilitate expertise application, transmission and management in the farmer’s fields. Perhaps, agricultural extension is the only service at the ground-level that can provide essential knowledge, guidance, information as well as assistance to the farmers and the stakeholders. There has been extensive range of transformation and inventiveness in agricultural extension services in India; however, the exposure and access to information which were disseminated to marginal and underprivileged farmers are uneven and patchy. Likewise, in real situation a huge gap existed between the technology developed/released and the technology disseminated/adopted. A study by NSSO (National Sample Survey Organisation), 2014, highlighted that the almost 59 per cent of the farm families refrained from any assistance from either government or private extension services. In the country, 40.6 per cent households received extension assistance while, only 11 per cent of the services came from physical government machineries. At present hardly onethird of the technology developed at the research organizations has reached the farming community and the statistics of adoption/application of such technology at field level is even less than that. Practical application of many of our recommended agricultural technologies in the field is very much difficult either because of the complex nature of the technology or inputs so prescribed are not readily available in nearby areas. Moreover, most of the extension machineries tend to work in isolation from each other. The production-oriented strategy which was the sole focus of earlier extension services, needs to be expanded to market-led strategy to deal with the novel

Introduction
Karnataka Veterinary, Animal and Fisheries Sciences University (KVAFSU),
Bidar started in the year 2005 exclusively for the development of education and learning; conduct of research and extension education and transfer of rural oriented technologies in the areas of Veterinary, Animal, Dairy and Fisheries Sciences in Karnataka. The logo of the University is inscribed with the slogan “Farmers Friendly and Rural Oriented”, which emphasizes the importance given to betterment of farming community. The mission of Karnataka Veterinary, Animal and Fisheries Sciences University (KVAFSU), Bidar, is to strive hard and provide leadership in teaching, research and extension education services related to Veterinary and Animal sciences, Dairy sciences, Fisheries and other allied sciences. The University endeavor is to keep pace with new frontiers of science and contemporary developments to be socially and technically relevant. In this context, KVAFSU is strongly committed in absorbing newer paradigms and using them to develop excellent human resource, innovative technologies and their dissemination so as to serve the livestock and fishery farming community of the state and the country. Various extension educational activities are undertaken by the university at various levels, viz., Extension Education, Extension Research, Extension Work and Extension Service. Collaborative activities are being planned and implemented in association with various stakeholders like Farmers, Farmers’ organizations, Department of Animal Husbandry and Veterinary Services, Karnataka Milk Federation, etc. Besides conducting routine extension activities like trainings, demonstrations, animal health camps, field trips, field tours, campaigns, livestock shows etc., KVAFSU has come out with some innovative approaches in extension education. Which are presented in this book chapter. Extension activities are undertaken mainly under two categories, i.e. university / college activities and collaborative / sponsored activities.
I. Innovative Extension Approaches Under University / College Activities Organization of Radio Series for Farming Community Radio remains an effective medium for disseminating veterinary knowledge, especially in rural areas. KVAFSU collaborates with radio stations to
• Broadcast expert talks on Veterinary and Animal Husbandry topics. More than 150 expert talks from Veterinary college Hassan, entitled as Gokulavani series, Kukkutavani series, Hainnu Honnu series I, II, II are broadcasted through AIR Hassan. Presently, Hainnu Honnu series IV is being executed with another 50 series of expert talks and skits as well.

Introduction

In India the economy is based on rural and agrarian and decline with land holding area poses a serious challenge to the sustainability and profitability of farming. In view of the decline in per capita availability of land from 0.5 ha in 1950-51 to 0.15 ha by the turn of the century and a projected further decline to less than 0.1 ha by 2020, it is imperative to develop strategies and innovate new agricultural technologies that enable adequate employment and income generation, especially for small and marginal farmers who constitute more than 80% of the farming community. The crop and cropping system based perspective of research needs to make way for farming systems based research conducted in a holistic manner for the sound management of available resources by small farmers (Jha, 2003). Under the gradual shrinking of land holdings, it is necessary to integrate land based enterprises like fishery, poultry, duckery, apiary, field and horticultural crops, etc. within the bio-physical and socio-economic environment of the farmers to make farming more profitable and dependable (Behera et al., 2004). No single farm enterprise is likely to be able to sustain the small and marginal farmers without resorting to integrated farming systems (IFS) for the generation of adequate income and gainful employment year-round (Mahapatra, 1992; 1994). Farming systems approach, therefore, is a valuable approach to address the problems of sustainable economic growth for the farming communities in India.

Introduction

The food processing industry ranks fifth in size in the country and employs 16 lakh workers which is 19% of the country’s industrial labour. It accounts for 14% of the total industrial output with 18% of industrial GDP and 6.3% of countries GDP. So, food processing plays a vital role in India’s prosperity. The Food Processing Industry sector in India is one of the largest sector in terms of production, consumption, export and growth prospects. Food processing industry broadly comprises primary processing category and the other categories embracing the secondary, tertiary and further stages of downstream processing. Primary food processing is a major industry with lakhs of rice-mills/ hullers, flour mills, pulse mills and oil-seed mills. There are several thousands of bakeries, traditional food units and fruit/vegetable/spice processing units in the unorganized sector. In the organized sector, there are over 820 flour mills, 418 fish processing units, 6600 fruit/vegetable processing units and 171 meat processing units. Indian processing industries has installed capacity of 21 lakh tones; however these industries actually processed 9.8 lakh tones of the produce. So the total capacity utilization of industries is <30%. There are 70% units in home/cottage/ small scale sector and 30% units in large scale sector with capacity of 250 tonnes per annum and 30 tonnes/hr, respectively. Large scale contributes 70% of the production. The principal crops and commodities which constitute the primary base for the food processing industry and considered important sub-sectors in food processing industries are illustrated in Fig. 1.

Introduction

The managemment of pests and diseases in agriculture is challenging for farmers. Antibiotics and chemical pesticides are commonly used in traditional methods, which can be harmful to human health, the environment, and the long-term sustainability of agricultural practices. This article explores innovative approaches to pest and disease management in agriculture that are changing the game (Lykogianni et al., 2021). Techniques for controlling diseases and pests in field crops are necessary to keep agricultural systems healthy and productive. Farmers and agricultural professionals can prevent, monitor, and control pests and diseases that can significantly affect crop yields in a variety of ways. These administrators are practicing strategies to find a balance between restricting the use of chemical inputs, promoting sustainable agriculture, and maintaining financial viability.

Principle of Integrated Pests and Disease Management (IPDM)

• Suppression and Prevention: The elimination and prevention of pests are the first tenets of IPM. IPM aims to prevent a single pest from dominating a cropping system or causing damage, not eliminate all pests (Barzman et al., 2015). Three distinct sub-principles are combined in this principle: crop rotation and management, ecology, and a multi-pest strategy in combination The papers in this Special Issue discuss each of these guiding principles. A genuine illustration of the mix of strategies and multi-pest approaches is crafted by Poggi et al. (2021), who discussed ways to control wireworms in field crops. A risk assessment based on the production context (such as crop, climate, soil characteristics, and landscape) and monitoring of adult and/or larval populations should be the first steps in any new agro-ecological strategy.

Introduction 
University of Agricultural Sciences, Dharwad is one of the premier agriculture Universities in India has made its remarkable journey in the field of Teaching/ Research / Extension since its inception, UAS, Dharwad has got six Krishi Vigyan Kendras sponsored by Indian Council of Agricultural Research. Which have adopted various outreach methodologies for the farming community. Apart from conventional methods of technology transfer i.e., technologies in pipeline (farm trails) conducted in farmers fields for their acceptance, front line demonstration, on farm testing, PRA, diagnostic field visits etc. KVKs have employed various techniques making use of ICT which have proved to be effective in enhancing the productivity of farms (Medhi et al., 2017), reaching farmers quickly and effectively. The present paper is a compilation of innovative methodologies adopted by KVKs under UAS Dharwad during last five years. As it is mandate for all the KVKs to prepare action plan before the onset of every year during March-April, vigorous exercises are done by KVKs to prioritize the problems faced by farmers in the particular district. These problems are planned to tackle the location specific technologies developed in that zone. If the technologies under FLD banner are not available in particular technologies developed elsewhere in NARS are borrowed and tested for both its sustainability under that agro-ecological system. During this process of prioritizing the problems, implementation and monitoring, KVK adopt various methods given as discussed below.

Objectives
• To explore creative and interactive techniques for effective vocabulary expansion.
• To enhance understanding and retention of new words through contextbased learning.
• To encourage the use of digital tools and apps for engaging vocabulary building.
• To promote collaborative learning strategies for vocabulary enhancement
• To develop critical thinking by applying new vocabulary in diverse contexts.
Contextual Learning
One of the most effective ways to learn new words is through contextual learning. This involves understanding words through the context in which they are used, rather than learning definitions in isolation.
Steps to Implement Contextual Learning
• Reading Widely: Expose yourself to a variety of texts (books, articles, blogs) to encounter new words in different contexts.
• Word Journals: Maintain a journal of new words with examples of how they are used in sentences.
• Context Clues: When encountering an unfamiliar word, try to deduce its meaning based on the surrounding words and context before looking it up.

Abstract

Access to reliable and affordable irrigation is one of the most important enablers to increase agricultural productivity and income for farmers. An innovative Manual Axis Tracking Solar Pump model and its utility in providing affordable irrigation has been discussed in this paper. The proposed Manual Axis Tracking Solar Pump can increase output on an average 8%-12% more than fixed panel and is much cheaper than automated tracking. This paper deliberates upon the technical features that make the Manual Axis Tracking Solar Pump an advantage over its nearest competitor, the diesel pump. Government of India has already introduced various subsidy-based solar pump schemes and most of them are not popular because of low discharge issue. The low discharge issue can be solved by this proposed optimum tilt-based Manual Tracking Solar Pump, whose sustainable market penetration is suggested through various strategies in the paper, supported by case studies. The proposed entrepreneurship model not only opens a new era of agricultural business but also helps to reduce the GHG emissions.

Probiotic Fermented food products
 
An individual requires adequate nutrients like proteins, carbohydrates, vitamins, and minerals to maintain diet. There has been an explosion of the consumer interest in the role of enhancing the health by some specific foods or physiologically active food components, so called functional foods (Hasler, 1998). The concept of functional foods evolved in the year 1990 in Japan.

Abstract

Today more than 70% of energy is generated by coal-based thermal power plants. Indian coal contains about 40% ash, these power plants generate enormous amounts of fly ash, which is dumped in the nearby areas. This creates not only economy constraints but also imposes serious environmental problems, which are the potential hazards to the ecosystem. However, recent attempts in India and abroad are being made for biological association of fly ash e.g. in soil improvement, in wasteland management and also as a source of essential plant nutrients for nutrient deficient soil in terrestrial eco-system and agro-ecosystem. Fly ash has been found to have manifold advantages in agriculture especially in modification of soil texture and bulk density, in optimization of soil pH, in improvement of water holding capacity of soil, in the improvement of yield as a micronutrient supplement to soil and in creation of conducive condition for better plant growth. In this article utilization of fly ash along with VAM fungi and other microbes especially nitrogen fixers and phosphate solubilizers in removing the constraints of salt affected soils has been discussed.

Introduction
 
Developments in innovative food packaging technologies have evolved in response to the need for protection of the food product containing bioactive component from both external and internal environments and in response to consumer expectations for health claims, convenience and product safety. Consumers around the world are willing to pay extra for guaranteed product freshness delivered by the type of packaging. Many new packaging developments have focused on extending the shelf life of the product and on delivering a higher quality product to the consumer. These developments would not be possible without significant advances in the materials used in packaging and the incorporation of various types of sensors into food packaging. This chapter outlines the innovative packaing solutions in the production of functional food.

Plant disease causes losses estimated for 20-40 per cent of global crop. Climate change has a very complex effect on plant-pathogen interactions, since environmental conditions affect the whole disease triangle: they modify plant susceptibility, the biological cycles of parasites and pathogens, and hostpathogen physiology and interactions. Innovative plant protection strategies in horticultural crops encompass a wide range of techniques and approaches aimed at safeguarding plants from pests, diseases, and environmental stresses in a sustainable and effective manner. These strategies are essential for ensuring the productivity, quality, and resilience of horticultural crops while minimizing negative impacts on the environment and human health.

Climate change, including increased temperature, CO levels, acid rain, and tropospheric O 3 2 , stresses plants and lowers their pathogen response. While higher CO 2 reduces stomata density, acid rain and O weaken cuticle protection, aiding pathogen entry.

Introduction

The Indian Council of Agricultural Research is the apex body for co-coordinating, guiding and managing research and education in agriculture including horticulture, fisheries and animal sciences in the entire country with more than hundred and above ICAR libraries and fifty six state agricultural universities libraries spread across the country this is one of the largest national agricultural library network in the in the country under consortium of e-Resources in Agriculture. The Indian Council of Agricultural Research (ICAR) has contributed a lot towards strengthening of Agricultural Libraries via modern Information Technological (IT) tools. ICAR has sanctioned so many projects under National Agricultural Technology Project and National Agricultural Innovative Projects i.e e-Granth, CeRA, Krishiprabha, Krishikosh Agricat etc. for strengthening and development of agricultural libraries. These are useful to manage knowledge explosion and helpful in libraries to providing information effectively to the end user of society.

1. Introduction
Aquaculture has emerged as one of the fastest-growing sectors of food production worldwide, driven by the increasing demand for fish and seafood as essential sources of protein, healthy fats, and micronutrients. As wild fisheries face overexploitation and environmental degradation, aquaculture is seen as a solution to meet the growing global need for seafood. However, the sustainability of aquaculture itself is under scrutiny due to its reliance on traditional feed ingredients, particularly fishmeal and fish oil derived from wild-caught fish. Fishmeal has long been considered an ideal protein source for aquafeeds because of its excellent amino acid profile, high digestibility, and essential fatty acid content. Yet, the continued use of fishmeal places immense pressure on wild fish stocks, particularly small pelagic species that are harvested specifically for fishmeal production.
The overexploitation of these fish stocks raises significant ecological concerns, threatening marine biodiversity and destabilizing food webs. The reliance on fishmeal is also economically challenging, as fluctuating supply and increasing demand have led to rising costs and price volatility. Moreover, as the aquaculture industry continues to expand, the demand for fishmeal will surpass the sustainable supply, exacerbating these environmental and economic issues. In response to these challenges, researchers and industry stakeholders have been actively seeking sustainable and cost-effective alternatives to fishmeal. These innovative protein sources are not only essential for reducing the environmental impact of aquaculture but also for ensuring the long-term viability of the industry. The development of alternative protein sources must consider several factors, including their nutritional composition, availability, cost-effectiveness, and environmental footprint.

Agriculture constitutes the primary source of income in rural India. Rural women play a pivotal role in various agricultural practices, encompassing activities such as planting, harvesting, and post-harvesting operations. Additionally, their responsibilities extend to producing agricultural crops, tending to animals, processing and preparing food, engaging in wage labor within agricultural or other rural enterprises, collecting fuel and water, participating in trade and marketing, caring for family members, and maintaining their homes (Klasen and Lamanna, 2009).

The engagement of rural women in agriculture is extensive and multifaceted, covering a wide range of activities that are vital for household sustenance and community welfare. These activities are essential not only for economic stability but also for food security and overall rural development.

Introduction

Greenhouse gases (GHGs) absorb long-wave radiation emitted from the Sun and the Earth’s surface, and radiate it back to Earth’s atmosphere, creating the greenhouse effect. Gases like carbon dioxide (CO₂), methane (CH₄), nitrous oxide (N₂O) occur in traces but play crucial roles in controlling the temperature of Earth’s atmosphere. The natural as well as anthropogenic activities have major impacts on the GHGs emissions that include continuously increasing concentration of CO₂, CH₄ and N₂O in the atmosphere. The heat-trapping properties of these above mentioned GHGs are well established. Different GHGs have different warming potential (radiative forcing) on the global climate system due to their different radiative properties and lifetimes in the atmosphere. Changes in the atmospheric concentrations of GHGs modify the energy equilibrium of the climate system which leads to subsequent climate change. They affect the absorption, scattering and emission of radiation within the atmosphere and at the earth’s surface. Globally agriculture is estimated to account for 10%–20% of anthropogenic GHG emissions (Smith and Olesen 2010). Share of contribution of these gases towards global warming are different such as CH₄ 20-25%, CO₂ 40-50% and N₂O 5-10%; with present pace of increment every year 0.41, 0.42 and 0.25%, respectively IPCC, 2019.

Healthcare programs across many countries, particularly in developing nations, increasingly employ Behavior Change Communication (BCC) to enhance the health status and well-being of populations. BCC is a process designed to motivate individuals to adopt and maintain healthy behaviors and lifestyles. An effective BCC strategy plays a crucial role in implementing activities aimed at improving population health. Notably, BCC is a healthcare education strategy outlined in the Uttar Pradesh National Rural Health Mission (NRHM) with goals including reducing mortality, fertility, and morbidity.

Upon completion of this unit, learners should be able to:

• Explain the meaning and benefits of BCC in family healthcare.

• Discuss various channels of BCC.

• Formulate BCC strategies.

• Follow guidelines for successful BCC implementation.

Abstract

The J&K state, like other Himalayan states, is endowed with varied climates and agro-climatic situations and has the potential for improvement in a horticulture sector. Focus on selective issues based on the niches of the areas , strengthening the on-going programs of different developmental departments, site specific issues, backed up with latest technologies need to be identified which can have tangible and immediate impact on the farm economy. The horticulture section is doing well in Jammu and Kashmir state when compared with others food crops, since it fetches good price because of its nature of seasonality. The estimation of the potential profits can be drawn by the fact that a farmer producing wheat of 1 kg gets 10 times higher prices for the same produce in horticulture section. Considering this high potential, the concept of doubling farmer’s income can work magically with horticultural crops. There is a need of shift from traditional crops and cropping patterns. Technological interventions are required to strengthen the conditions of cold storage, adoption of farming system approach, instead of cropping system approach, incorporating element of diversification, promotion of cultivation of high value crops, efficient post-harvest management, value addition etc. popularization of technologies and schemes to achieve targeted growth in horticulture. Strengthening water resources through rainwater harvesting, soil moisture conservation and efficient utilization of stored/conserved rain water (micro-irrigation, fertigation). Promotion of niche commodities based on agro-ecological situations will benefit promotional efforts in horticulture development with increased benefit cost ratio.

Introduction

Technical innovation is a process by which new or improved technologies are developed and brought to widespread use (Ambuj Sagar, 2013). Technical innovations are interlinked by research, development, demonstration and deployment which involves a range of organizations and personals with institutional arrangements underpinning the growth and advancement of different kinds of technologies. In the area of water productivity, technical innovations has helped expand water supplies through improved exploration and recovery techniques, increased water use efficiency, improved water availability and reduced environmental impact of water and its usage.

The inoculum dosage and method of application determines the efficacy of biofertilizers. The quantity of biofertilizers to be applied depends on the type of crop, seed rate and soil edaphic factors. There are 3 methods for inoculation of biofertilizers

Seed treatment: One packet containing inoculant (200 g) is mixed with 200 ml of rice gruel or 40 % gum arabic solution to make a slurry (Fig. 23). Then the seeds required for an acre are mixed in the slurry in such a manner that they have a uniform coating of the inoculant over the seeds. Then, the inoculated seeds are shade dried for 30 minutes. The shade dried seeds should be sown within 24 hours. One packet of the inoculant (200 g) is normally sufficient to treat 10 kg of seeds.

5.1 Important Terms

i. Inoculum: The infective pathogen propagules coming in contact with the host constitutes the inoculum. The inoculum in the liquid state is a significant factor in anaerobic digestion in solid phase because it is very useful to convey the micro organisms, the water of recirculation. Depending on the particular inoculant formulation, the inocula can be used for seed coating, for dipping seedlings, direct application to the furrow, or as foliar application. An appropriate inoculum consists of copious amounts of active microbes having the potential to convert the organic matter to biogas and the S/I ratio is essential for the rate of degradation of a recalcitrant substrate since it governs not only the biogas composition, digestion period and reactor. Spread of inoculum may occur by wind, water, infected plant material, insects, animals, birds, and people. Plant diseases may have more than one source of inoculum. The infection cycle of some economically important soil-borne plant pathogens involves a combination of primary infection from particulate inoculum residing in the soil and secondary infection as disease is spread from infected to susceptible hosts.

The infectivity of inoculum can be quantified by the pathozone profile which measures changes in the probability of infection when inoculum occurs at different distances from the host. For instance, the germinability of inoculum, the growth of the mycelial colony and the infectivity of mycelium at the surface of the host combine to dictate the shape of the pathozone profile for Rhizoctonia solani on radish. The ultimate shape of the pathozone depended on inoculum type and was particularly sensitive to changes in the density and distribution of the mycelium in the fungal colony. Mycelium from an infected radish plant grew much further and at a higher density than that from particulate inoculum (mycelial discs). This results in pathozone profiles that differed in shape. For particulate inoculum the profile rise and fall with distance whilst for an infected plant the decay is sigmoidal.

4.1 Introduction

Fruit tree plantations are increasing gradually, sometimes at the expense of marginal lands. Consequently, limiting soils are now being used for crop production. Such soils are considerably constrained in terms of infiltration, retention, and transmission of water, and also regarding the salinity and/ or nutrient content. A number of agronomical techniques can be used to improve soil productivity for agricultural purposes; however, many of them are ineffective or unsustainable. Mulching techniques have emerged in recent years to address these soil constraints yielding positive results in a variety of scenarios. Zribi et al. (2015) reported the positive effects of mulches and organic amendments on soil physical properties such as increased water retention and decreased soil evaporation.

Mulching is the process of covering soil around plant root area with some extraneous matter of organic or inorganic in nature with a view to insulate the plant and its roots from the effects of extreme temperature fluctuations and make conditions more favourable for growing, as well as avoid weed germination and to conserve the available soil moisture.

Soil is a dynamic natural body of the uppermost layer of earth’s crust produced by the transformation of mineral and organic substances on the earth’ s surface under the influence of environmental factors over a long period. It is the most basic of all natural resources upon which all living forms on the terrestrial ecosystem directly and indirectly depends. However, soil resources are finite, nonrenewable, fragile and heterogeneous in space and time. As a component of pedosphere, it occurs as interface between the lithosphere and atmosphere and strongly interacts with biosphere and hydrosphere (Figure 1 & 2).

11.1. Introduction
The input-output relationship is commonly referred to as the Classical Production Function.
The Classical Production Function is also known as the Law of Diminishing Returns or the Law of Increasing Costs.
It is sometimes termed the “Law of Life”, as it serves as a fundamental principle of economics upon which several other economic laws are based.
This law analyzes the relationship between a single variable factor and output while keeping all other factors constant.
It represents a short-run production function.
11.2. Definition
The Law of Increasing Cost states that the proportion of one factor in a combination of factors increases till a certain point but after that first the marginal product then the average product will diminish.
According to Marshall “An increase in capital and labour applied in the cultivation of land causes in general less than proportionate increase in the amount of produce raised, unless it happens to coincide with the improvements in the arts of agriculture”.
According to Earl O. Heady “If the quantity of one of productive service is increased by equal increments, with the quantity of other resource services held constant, the increments to total product may increase at first but will decrease after certain point”.

Introduction

Entomophagy, the consumption of insects, is rooted in human evolutionary history (Fontaneto, 2011). Throughout Africa, Europe, Asia, and Latin America, insects have held a vital position in the timeline of human nutrition. There exist more than 1900 documented species of insects that serve as human diets at globally, with notable groups encompassing grasshoppers (Orthoptera), caterpillars (Lepidoptera), grubs (Coleoptera), wringed termites (Isoptera), some hymenopteran insects, cicadas (Hemiptera), and a diverse array of aquatic insects. It is intriguing to observe that insects are regularly consumed by over two billion people, and in specific regions, they make up a substantial portion of the animal proteins consumed.

Many chemical and visual lures attract insects and therefore can be used as attractants to monitor or directly catch and reduce insect populations. These attractants are used in ways that do not injure other animals or humans or result in residues on foods or feeds, and can be used in an environmentally sound manner in pest management programs.

Objective

The aim of this practical is to categorize insects based on their wing characteristics.

Introduction: Insect classification, as outlined by A.D. Imms (1957), divides Class Insecta or Hexapoda into two primary groups:

Group 1: Apterygota: These insects lack wings, and the absence of wings is considered primitive. Metamorphosis is minimal or absent. Adults typically possess one or more pairs of pregenital abdominal appendages. The mandible of adults usually articulates with the head capsule at a single point. This group comprises four orders:

1. Thysanura - Example: Silverfish

2. Diplura - Example: Japygids

3. Protura - Example: Telson tails or proturans

4. Collembola - Example: Springtails

Many insect can be observed at any hour of the day. This is proper understanding of the taxonomy and biology. The insect collection, storage and preservation are useful technique of their culture. The best period for collection is from early spring to late rainfall and the best time of the collection of most of the species is during the daytime. The insect are polyphagous and therefore, plants provide one of the best collecting places. Insect can be picked, swept off the plant with the help of a net. Different species feed on different kinds of plant, one should therefore, examine all sorts of plant, flowers weed shrubs and trees. Few insect are only found in the stem, bark, wood, fruit or roots etc. Some species can be found in the leaf mud and litter on the surface of the soil, particularly in woods or areas where the vegetation is dense, others can be found under stones bark etc. other house hold insects may be observed feeding on clothing, furniture, grain, food and other parts of Plant and House and some are aquatic insects.

Endoskeleton of the Head (Tentorium)

• The tentorium forms during development when 2-4 pairs of apophysis/ apodemes (finger-like invaginations of exoskeleton) fuse internally to create a “bridge”.

• The major components of the tentorium are the anterior tentorial arms, the posterior tentorial arms, the dorsal tentorial arms, and the tentorial bridge.

• The anterior tentorial arms originate as invaginations at the lateral limits of the frontoclypeal suture. The coalescence of the anterior tentorial arms forms a more or less solid structure, the tentorial bridge.

• The posterior tentorial arms arise from pits at the ventral ends of the post occipital suture and they unite to form a bridge running across the head from one side to the other.

• In many insects, e.g. Orhtoptera, the central part of the composite tentorium enlarged to form a broad plate referred to as the Corporotentorium.

• The tentorium serves as an internal “truss” that reinforces the head capsule, cradles the brain, provides attachment for muscles and provides a rigid origin for muscles of the mandibles and other mouthparts. The antennal muscles also arise from the tentorium.

Introduction

Insects, classified under the Class Insecta within the Phylum Arthropoda, exhibit diverse characteristics. Sometimes, distinguishing between different arthropods is necessary to confirm their classification as insects. Biologists frequently employ dichotomous keys, systematic tools designed to assist in organism identification, to navigate this task.

Instructions

Follow the steps outlined below to identify the insects described. Utilize the provided dichotomous keys and accompanying figures to aid in the identification process.

Insect infestation occurs in stored grains and grain products to variable extent depending upon the storage conditions in developing countries. The losses of nutritional compounds are proportional to the extent of insect infestation, nature of insect feeding and distribution of nutritional chemicals in different seed components.

1. Sources of Insect Infestation

There are many sources that leads to infestation in storage, viz., left over seed from bins or stores or spilled seeds under the stacks, cleanings, sweepings of storage structure, processing plants, old infested stores, old gunny bags, insect infested transport vehicles, storing insect infested seeds with fresh stock or vice-versa, entry of insects from neighbouring stores and carry over of field infestation

The inspection of storage facilities and the food products they contain is crucial for preserving grain intended for human consumption. Stored grain is not simply a passive substance; it is a living, breathing organic entity that undergoes deterioration during storage. This deterioration can occur in terms of quantity, through dry matter loss (DML), or quality, with issues such as discoloration, mold contamination, sprouting, and caking caused by microorganisms, invertebrate pests (insects and arachnids), and vertebrate pests (rodents and birds). Additional weight loss happens during the handling, transportation, and processing of stored grains.
To gather accurate data on all forms of loss, regular and thorough inspection and sampling are essential. These inspections are crucial for making informed management decisions regarding remedial actions against biological deterioration agents or the disposal of grain, taking into account the condition of both the commodity and the storage environment. Regular inspections help maintain a storage environment that supports grain quality by keeping track of any significant pest population increases, grain temperature, moisture migration, spillage, and grain residues.
Such inspections also encourage the general upkeep of the storage structure and its surroundings, which helps to minimize pest access. By addressing cracks and crevices in the storage fabric and removing old, often infested, bags and equipment, the risk of pest infestation is significantly reduced.
The inspection should address several factors:
• The presence of pests, if any
• Identification of species, population densities, and locations
• Damage inflicted prior to inspection
• The growth potential of pest populations or whether they will die out if conditions remain the same

Apterygotes

The Apterygota, which formerly included the other primitively wingless insects currently placed in the class Entognatha, are now restricted to the two orders Archaeognatha and Zygentoma, which in turn were formerly united as the Thysanura. Despite the superficial similarity of the two groups, it is now clear that they are not closely related, mainly because of fundamental differences in the mouthparts. The Archaeognathous mandibles are monocondylic, having a single articulating point with the head so that the mandible can rotate. The Zygentomous mandibles are dicondylic, with two articulating points that restrict the motion to a single plane yet enable the development of a much stronger biting action; this is the type found in all the higher insects, and the Zygentoma may well be the sister group of the Pterygota, or winged insects. Clearly the ‘Apterygota’ is not a monophyletic group and is simply retained for convenience in grouping these two orders that superficially resemble each other and have similar life histories.

ORIGIN OF INSECT

Entomology is a branch of zoology which deals with insects. In this branch we study the insect origin and evolution of insect and their diversity and classification and other parts of insect body. Insects belong to the class insecta in the phylum arthropoda, the largest group in the animal kingdom. All arthropods are characterised by having segmented body, claws, chitinous exoskeleton, ventral nervous system and dorsal heart. The class insecta is generally considered to have evolved from myriapod of some sort during the Devonian period. Based on different mandibles and mandibular movement concluded that insects are not direct insect group myriapods the mouth is located between the prostomium and the first body segment and the anus open in the periproct.
The first great step was the development of a pair of ventral appendage. Insect legs on each body segments and locomotion, parallel to this an improvement in the sense organs of the head occured eyes and Antenna were the ultimate result this level of organisation is met in onychophora. A series of diagramms is helpful in a very simplified way in visualising the hypothtical origin of insects.

‘Insect pest control’ includes all measures adopted to make the life of insects hard and ultimately to destroy them or to prevent their multiplication and spread. Such measures can be taken up before the appearance of the pests or after occurrence of the pests. To achieve this purpose , it is quite necessary to know the factors, which favor the occurrence of the pests and acquire enough knowledge about the nature and life cycle of the pests, the vulnerable growth stage at which they can be effectively destroyed and appropriate measures of control to destroy them Control measures may be either preventive or direct.

Need for pest control

Control measures for the control of pests have to be taken up as soon as the infestation reaches the economic threshold level. Failure to control the pests at this stage will result in further increase in the pest population and consequent loss in yield and economic loss.

The need for pest control is of two kinds :

i) For yield maximization. The only objective of pest control in this method is to maximize the yield. The cost incurred for pest control is most often more than the income accrued as a result of pest control. The method is adopted only with the object of increasing the yield as much as possible so that the country and the people may be benefited. In this method, pest control operations are taken up before the actual occurrence of the pest or before the pest infestation reaches the economic threshold level. Such treatments taken up to control the pests before their occurrence are known as ‘prophylactic treatments’

1. INSECT- PESTS OF MANGO

1. Mango hoppers: Idioscopus niveosparus, I. clypealis, Amritodus atkinsoni (Cicadellidae: Hemiptera)

Management

• Avoid close planting, as the incidence becomes very severe in overcrowded orchards.
• Orchards must be kept clean by ploughing and removal of weeds.
• Pruning of dense canopy to facilitate aeration and sunlight.
• Avoid excess use of nitrogenous fertilizers.
• Immediately after withdrawal of monsoon (September-October), off-seasonal trunk spraying with Malathion 50 EC @ 15 ml in 10 lit of water suppresses the adult hoppers from multiplying further and hinders their oviposition and also kills the newly hatched nymphs.
• Avoid application of all other synthetic pyrethroids as they have been reported to cause resurgence of hoppers.
• If overlapping generations of hoppers are found, spray imidacloprid @ 3 ml or acetamaprid 4 gm in 10 litres of water at panicle emergence stage.

Immediately after withdrawal of monsoon (September-October), offseasonal trunk spraying with Malathion 50 EC @ 15 ml in 10 lit of water suppresses the adult hoppers from multiplying further and hinders their oviposition and also kills the newly hatched nymphs.