eChapters

Introduction

Vermicompost is an organic manure (bio-fertilizer) produced as the vermicast by earth worm feeding on biological waste material and plant residues. This compost is an odorless and clean organic material containing adequate quantities of N, P, K and several micronutrients essential for plant growth. Vermicompost is a preferred nutrient source for organic farming. It is eco-friendly, non-toxic, consumes low energy input for composting and is a recycled biological product. Earthworms are soil invertebrates well known for their contribution to soil transformation and turnover, by breaking down of organic material. The effect of earthworms on soils can take three main forms: effects on biological, physical, or chemical soil properties and processes. These can operate eother directly or indirectly.
 
Farmers are aware that earthworms are generally beneficial.  However, few are familiar with the important species they have on their land and the amount or number of earthworm required for their soil is also a big question to them. It is important that farmers must identify and familiarize with the species of earthworms so that they can be utilized for the purpose of vermicomposting.

Introduction

The productivity of pulses in India has remained stagnant over the past several decades. In the case of pigeonpea, which a major pulse crop in India, it has been hovering around 700 kg ha-1 for the last five decades. Uttar Pradesh (UP) occupies 9.14% (2.16 million ha) of the total area under pigeonpea in the country (23.63 million ha). Poor crop management practices adopted by the farmers, non-availability of quality seed of improved varieties, damage by insect pests and diseases and drought are some of the factors responsible low productivity in pulses. In a recent review, Maruthi Shankar et al. (2004) identified shortage of quality seed as one of the major constraints for increasing pigeonpea production in India. The genetically pure seed alone can increase productivity by 10-15% (Saxena, 2006).

Despite release of several improved varieties of pigeonpea, local landraces dominate the cultivation of pigeonpea in the country. Timely availability of quality seed of improved varieties at affordable price remains one of the major concerns in pigeonpea cultivation. Most of the farmers procure their pigeonpea seed from local traders or rely on their ‘own-saved’ seed.

Introduction

The process of agricultural modernization has produced three distinct types of agriculture. These are industrialized, green revolution and low-external input and unimproved (Chambers et al. 1989) . The industrialized and the green revolution agriculture have been able to respond to the technological package, producing high input, high output systems of agriculture. Most agricultural systems in the industrialized countries count as high external input systems save for the relatively small number of organic farmers (Pretty 1995) . In the countries of the Third World, high-external input systems are found in the large irrigated plains and deltas of South, Southeast and East Asia, and parts of Latin America and North America, but also in patches in other regions. In the industrialized countries farmers modernized by introducing machinery, replacing labour, specializing operations and changing practices to ensure greater production. In the green revolution areas the success lay in agricultural scientists breeding new varieties of stable cereals that matured quickly, and use of inorganic fertilizers, pesticides, machinery, credit and water regulation.

Introduction

Home to the largest population of poor in the world, India has been a natural candidate for experimenting with micro finance as a tool for poverty alleviation. With a nationalized formal banking sector that has emphasized rural and developmental banking for several decades now, India’s involvement with small credit targeted primarily at the rural poor is hardly new. Micro-credit, in the sense of small loans to the poor, is of ancient origin in India. Micro-Finance has, in recent times, come to be recognised and accepted as one of the new development paradigms for alleviating poverty through social and economic empowerment of the poor, with focus on empowering women. Experiences of different anti-poverty and other welfare programmes within the country and elsewhere, have shown that the key to its success lies in the participation of community based organisations at the grassroot level. People’s participation in credit delivery, recovery and linking of formal credit institutions to borrowers through the intermediation of Self Help Groups (SHGs) have been recognised as a supplementary mechanism for providing credit support to the rural poor. Poor people need micro-credit for various and different purposes. It may be to meet the major household expenses, emergency needs or even basic livelihood support.

ABSTRACT

The state of Jammu and Kashmir, especially the valley of Kashmir, has a rich diversity of traditional agroforestry models, which are in existence since time immemorial. Agroforestry is based primarily on natural occurrence of trees. The paper highlights the traditional agroforestry systems prevailing in the valley. A number of studies have been undertaken since the inception of AICRP-AF in University of Agricultural Sciences and Technology, Kashmir. Besides design and diagnostic survey, studies on evaluation of twelve multipurpose tree species identified during design and diagnostic survey and designing of various agroforestry models for different problematic sites have been undertaken. These studies have been tested over a period of time and have been found suitable for different sites. The out come of these studies and the recommended agroforestry systems are given in this paper.

INTRODUCTION

Land is a vital natural resource and is the basis of our existence. Due to mounting pressure of increasing human and livestock population it has been subjected to various pressures and misuse resulting in degradation of land and loss of biodiversity. Management of land is therefore, of paramount importance so that increasing needs of human and livestock are met on sustainable basis. During the last three decades agroforestry has been recognised as a distinct land management system, which is destined to play an important role in socio-economic transformation of marginal lands into more productive agrarian economy. India has a long tradition of agroforestry, farmers and land owners in different parts of the country integrate a variety of woody perennials in their crop and livestock production fields, depending upon the agro climatic conditions and local needs. Most of these practices are, however, location specific and information on these is very scanty, therefore, benefits have remained vastly under exploited and un extrapolated to other sites.

ABSTRACT

Deforestation, land degradation, biodiversity decline, demand of fuelwood, fodder and timber had necessitated the planners and scientists to develop a system of cropping which would be able to revert these detrimental effect of exploitation and simultaneously provide the day-to-day needs. In present paper we have revisited our ancestors who practiced agriculture in a sustainable basis by keeping trees in the field. This paper intends to highlight some of the problems which are being faced in North-Western Himalayas and suggest different agroforestry practices which should be adopted to sustainable utilize our resources.

INTRODUCTION

Though late, the country and the society have gradually started to realize the detrimental deterioration of our ecosystem and environment. There are several factors and reasons for the same. However, land use in the country in general and hills in particular have proved to be one of the most important factors and needs much of attention for proper planning. The vital role of the forests in maintaining the balance of the ecosystem has long been acknowledged world over. In our country too, it was rightly resolved through a National Forest Policy Resolution in the years 1952 to bring at least twothird of the land in hills under the forest cover. This decision, though wise timely and farsighted, was never implemented with same spirit and there are evidences to accept the fact that effective forest cover in hilly areas is far less. The increasing need of expanding industrialization and urbanization coupled with population growth, the process of illegal and indiscriminate cutting of trees is resulting in consistent decrease of forest cover in the hills. The cultivation of land on steep slopes and hillsides is causing heavy loss of top soil and depleting the productivity of these soils besides siltation of river beds and cultivated lands down below. Coupled with this is the reckless destruction of vegetative cover by way of over-grazing which is resulting in large scale denudation and degradation of lands and thereby increasing acreage under wastelands. With this background the regular rains for which most of our country was well known have become irregular and drought have become a permanent menace and crores of rupees spent on relief work. The need for developing correct methodologies of land uses has become imperative to protect the existing forest cover, whether on public or private lands. Forest influences the rural prosperity and the human needs for the growing population have to be ensured while preserving the environment and ecological balance. A sustainable land-use system in conformity with ecological stability, economic viability and above risk aversion is desirable land use pattern in the Himalayan region.

ABSTRACT

The western part of India particularly Gujarat and Rajasthan received erratic and scanty rainfall and have sandy to sandy loam soil. In such climatic and edaphic conditions failure of crop is a regular phenomenon. In such situations a cropping system is required which can protect the associated crops from extremes of climatic condition and/or provide alternative/additional income. Agroforestry has such potentials; as a result lot of research had been done on agroforestry. This paper provides some of the agroforestry system and practices, which are suitable for Gujarat. The hurdles in adoption of agroforestry and its future prospects are also provided.

INTRODUCTION

North and North-West Gujarat fall under scarcity zone, where rainfall is inadequate as well as erratic in nature. Sandy loam soils with low moisture retention capacity pose problems of low and unstable crop production and degradation due to soil erosion. Under these situation, adoption of a high yielding, more remunerative, cost effective, compatible and multipurpose system ie Agroforestry is a dire necessity.

ABSTRACT

Homegardens are traditional agroforestry systems present throughout the northeast India especially in foothill region. The high diversity and the intensive care that is given to the homegarden in and around Arunachal Pradesh results in a unique combination of high levels of productivity, stability and sustainability of the system. The homegardens studied here were vertically distributed in four different layers viz, floor, middle, sub-canopy and canopy. Such stratification has given rise to the distribution of a variety of species based on light requirement in the system. Density and diversity index of tree species in the homegardens were highest in Harmutty in the foothills (468.5 plants ha^-1 and 1.17 respectively), whereas lower values were recorded in Ziro in the upper elevation (16 plants ha^-1, 0.651 respectively). Soil nutrients were greater in Harmutty, followed by Doimukh, Nirjuli and then Ziro. Maximum plant detrital (litter and fine roots) biomass and their subsequent decomposition in the homegardens of Harmutty (10185.67 kg ha^-1) might be the probable reason for the efficient nutrient cycling and generation of more available nutrients.

ABSTRACT

Tamil Nadu, the southern most state of India has 8 per cent of the country’s population and its net sown area is only 4-5 per cent of the country’s area. The state is endowed with varied physiography from hills to coastal lands and hence varied agroclimatic and edaphic conditions. This paper details the characteristics of different agroclimate and provides varied perennial and annual components being practiced in different combinations in these agroforestry systems.

INTRODUCTION

Land is a major non renewable natural resource. With the increase in population, the demand of land for all activities increases. The requirement of food, fibre, fodder and fuel of the ever increasing population has to be met with the finite land resources. In India, the pattern of land use in agriculture and forestry took a drastic turn during the period from fifties to eighties. Conservation, development and management of the available land is basic for ensuring food, ecological, environmental and economic security of our country. Tamil Nadu’s population is around 8 per cent of the total country and the net sown area is only a meager 4-5 per cent of that of the country. With the ever increasing population and expanding industrialization, steps need to be taken to utilize the land to the optimum extent possible and to identify and utilize lands effectively and efficiently in order to make full use of their maximum capability.

ABSTRACT

The integration of woody perennials on the farm lands for obvious reasons has been the common practice with the farming community for ages. It is true that the integration of trees on the farmland, albeit paves the way for the improvement of existing system, but nevertheless creates complex biological interactions, which may not necessarily result in yield advantage. Management of multipurpose tree species, especially agroforestry tree species, integrated on the farmland with crops, is essential for two reasons, i) because canopy size decides the transmission of photosynthetically active radiation to the understorey crops and ii) that the impact of canopy management practices some times have drastic implications. Canopy management practices like coppicing; pollarding and partial crown removal not only affects foliage and branch wood biomass production but also modifies physiological parameters and resource utilization pattern. This paper deals with the need and techniques of managing canopy as well as the research activities carried out in this regards.

ABSTRACT

The paper discusses distribution of bamboo, their uses and bamboo based agroforestry systems in India and their future potential. Bamboo, one of the fastest growing plant species is extremely versatile and has been traditionally put to a large number of uses. Application of modern technology and industrial processing has catapulted bamboo into a new global limelight. At present there is huge demand of bamboo based raw material viz., timber, plywood, bamboo flooring, edible bamboo shoots, etc. in the international market and most of the international market of bamboo is captured by China. In India, most of the bamboo raw material comes from natural forest. To capture the emerging bamboo market we have to increase the bamboo cultivation outside the forest under different bamboo based agroforestry systems. Experiments have shown that bamboo based agrisilviculture systems is technically and economically feasible in our country under different agro-ecological conditions. The agriculture crops which can be profitably grown with bamboo are soybean, pigeon pea, ginger, turmeric, etc. Keeping in view the international scenario, ecological conditions and taking clues from China’s success stories, some of the bamboo based agroforestry system components are also proposed.

A. Write the full form of the following:

i.         AAFCO: Association of American Feed Control Officials.

ii.        AAS: Atomic Absorption Spectrophotometry

iii.       HPLC: High Performance/Pressure Liquid Chromatography

iv.       GLC: Gas Liquid Chromatography

v.        AFRC: Agriculture & Food Research Council.

vi.       AICRP: All India Coordinated Research Project.

vii.      AOAC: Association of Official Analytical Chemists

viii.     ARC: Agricultural Research Council (United Kingdom)

ix.      BIS: Bureau of Indian Standard

x.      CIRC: Central Institute for Research on Cattle, Meerut

xi.     CIRG: Central Institute for Research on Goats, Makhdoom.

xii.    CLFMA: Compounded Livestock Feed Manufacturers Association (of India)

xiii.   COP 22: 22nd Conference of Parties.

A. Answer the following questions:

1.    What is concentrate ingredients?

Ans: These are feedstuffs having more than 60% TDN, less than 35% cell wall contents and less than 18% crude fibre on dry matter basis.

2.    What is soilage?

Ans: Pasture whether natural or cultivated when cut and fed green to an animal in its own stall is called soilage.

3.    What is husk?

Ans: Dry outer covering of grains and grams e.g. gram husk, rice husk.

4.    What is fodder?

Ans: Any green plant or crop meant for animal feeding for supply of nutrients and bulk.

5.    What is leguminous fodder?

A. Answer the following questions

1.    What is the DM consumption in adult guinea pig? Ans. An adult animal consumes @ 7-8% of body weight.

2.    Mention daily average feed consumption of guinea pigs?

Ans: Growing Guinea pigs: 20-30g, Adult maintenance: 30-50g, Pregnant and lactating: 40-60g.

3.    Write down the peculiarities of digestive system of guinea pig.

Ans. The entire stomach of guinea pig is lined with glandular epithelium and gastric mucosa does not have a keratinized portion.

4.    Why guinea pig cannot synthesize vitamin C?

When we talk about importance of feed technology in relation to animal productivity, feed represents the major cost in animal production as follows -
Feed processing includes all operations necessary to achieve the maximum potential of nutritional value of a feed stuff. The process involves changing ingredients in such a manner as to maximize their natural value and the net returns from their use. Feed processing may be accomplished by Physical, Chemical, Thermal, Bacterial or other changes of a feed ingredient before it is fed. The primary reasons for processing feeds are to make changes in the moisture content, density of feed, particle size, palatability; or to make more profit, to improve nutrient availability, keeping quality; or to reduce storage -transportation space, cost, moulds, salmonella and other harmful substances. Detoxification of undesirable components because some feeds may contain toxic substances, theexcess consumption of whichmaycausedecreased nutritive value of the feeds or may injure some vital organs or even cause death. Some natural inhibitors in feedstuffs are as following :

1. Introduction

Ohmic heating is an emerging method of thermal processing which have the feature of HTST treatment (Halden et al., 1990) with lower energy inputs (Choi et al., 2011; Sastry et al., 2011). During ohmic heating (Fig. 1) the alternating current is passed through the food material, where food acts as a resistor to the flow of electric current and leads to the instant volumetric heat generation by following the Joules first law of heating (Pereira & Vicente 2010; Lima et al., 1999 and 2001; Wang, 2014). Ohmic heat treatment of food material has been found to reduce microbial load of the food material simultaneously with the inactivation of the inherent enzymes (Demirdoven & Baysal 2014; Yildiz & Baysal 2006; Jakob et al., 2010). Despite the problems of electrochemical degradation associated with it, ohmic heating has been successfully studied for its use in preheating, blanching, pasteurization and extraction (Leizerson, & Shimoni, 2005; Lima & Sastry, 1999; Lakkakula et al., 2004). A majority of studies that have explored the effect of ohmic treatment have focused on a number of commercial products from pulp (strawberry), or puree (pea) to juice (grape), etc. (Castro et al, 2004; Icier et al, 2008; Icier et al., 2006). However, the present chapter is confined to put some light on the studies conducted on ohmic heating of various liquid food material and its effects on various parameters of the food material.

Introduction

The basic physiological structures of mammary glands in all species are almost same and are located externally in order to fulfill the milk requirement of neonates after parturition. The process of secretion of milk from the mammary glands is known as lacto genesis. Milk provides an almost complete nutrition to neonates from birth till weaning period. It is a complex mixture of various constituents like:

Lipids such a striacyl glycerols(TAG),phospholipids,cholesterols and other sterols, free fatty acids and fat-soluble vitamins

Carbohydrates such as lactose, oligosaccharides

Proteins such a scaseins, α-lactalbumin, β-lactoglobulin, immunoglobulin’s, bovine serum albumin, lactoferrin, lysozyme, enzymes, hormones and growth factors

Non-protein nitrogenous compounds like urea, creatine, creatinine, uric acid and amino acids

Major and minor minerals, water-soluble vitamins and cells (leucocytes, macrophages, and epithelial cells).

ALL LIVING ORGANISMS ARE MADE UP OF UNITS CALLED CELLS

All living creatures are made from 1 or more cells

All cells are produced from previously existing cells (no spontaneous generation)

All cells appear to be descended from the first cell which existed about 4 billion years ago

For a species to exist its reproductive cells must be potentially immortal (no aging)

Our bodies start from a single cell and contain about 100,000,000,000,000 (10^14) cells at maturity

MOST OF THE ENERGY FOR LIFE COMES FROM SUNLIGHT

Total rate of energy delivery from sun to earth (at the top of the atmosphere) = 175,000 terrawatts

Terrawatt = 10^12 watts

Rate of energy capture by plants from the sun = net primary productivity (NPP) = 100 terrawatts

Only ~ 0.06% of sunlight is captured

Captured in chemical bonds, especially in sugar

Small amounts of energy are available to specialized microorganisms from chemical reactions not linked to sunlight

It is estimated that 99% of the energy used by living cells comes from the sun

Incorporation of sunlight into chemical bonds occurs through the process of photosynthesis

“Invented” by cyanobacteria about 2 billion years ago

I. Definitions

Transpiration - evaporation of water from a plant surface

Evapotranspiration - evaporation of water from a plant surface and the soil (and abiotic surroundings.

Take-home-lesson: Plants loose a lot of water by transpiration. See text for some specific examples.

INTRODUCTION

In spite of technological developments for the last few decades, Indian agriculture is still rain dependent. Extreme weather events such as drought in 2002, cold wave during 2002-03, heat wave in the year 2003, increased temperatures during rabi 2003-04 and 2004-05, deficit rainfall in many parts of the country during 2004 and excess rains in 2005 (100cm in Mumbai, floods in MP, Gujarat, Orissa, AP, Tamilnadu and Karnataka) could affect the food grain production considerably. The spatial and temporal changes in important weather parameters such as rainfall, temperature, wind, cloud cover, humidity, etc. would influence crop yields by affecting farmers’ decision in selection of cultivar, use of inputs, crop management practices, etc. These decisions significantly influence the aggregate agricultural output, which , in succession has an impact on the economy of the country as a whole. Thus, the timely and accurate weather based agro -advisories is the need of the hour for sustainable agricultural production.

Further, the quality of utility of agro-advisories can be improved through value addition to the agromet information including forecast and demonstration of economic benefits accrued due to the following of the advisories. Thus making farmers to adapt weather-based advisories for (i) Increasing the quality and quantity of produce, (ii) Efficient utilization of resources, (iii) Minimizing losses due to adverse weather, (iv) Effective utilization of favourable weather events, and (v) Reducing cost of cultivation to enhance profits.

“I think that there is far too much work done in the world,” writes Bertrand Russell in In Praise of Idleness. Rightly so, a workaholic is not necessarily a valued employee. Why we work, asks Barry Schwartz. Why for most of us work is monotonous and meaningless? Why we have twice as many “actively disengaged” workers in the world as there are “engaged” workers?

Do we work only for money? Some think, work is about pay and nothing more. It is true, people work for money, but not always. Many people work for the challenge, meaning, and engagement it brings. “The lesson here is that just how important material incentives are to people will depend on how the human workplace is structured. And if we structure it in keeping with the false idea that people work only for pay, we’ll create workplaces that make this false idea true,” writes Schwartz.

1 Professor (Retired) Department of Agricultural Extension and Rural Sociology, Tamil Nadu Agricultural University, Coimbatore-641 003, Tamil Nadu

2 Assistant Professor, Department of Agricultural Extension and Rural Sociology, Agricultural College & Research Institute, Madurai-625 104

Introduction

The word ‘Extension’ was first coined in U.S.A. in the mid-part of the nineteenth century, to connote extension knowledge of improved practices in agriculture and home economics from Land Grant Colleges to the farmers and their families in their fields and homes. The literary meaning of Extension is ‘Ex’-out; Tensio’-to stretch i.e. Extension means stretching out. Extension, in the context of rural community development, means educating rural people and it implies production of changes in human behaviour -in terms of attitude, knowledge and skill. Extension is often misconceived as disbursement of subsidies and providing certain material incentives; it is certainly not.

There are several conventional extension techniques approaches and tools for transfer of any farm -related technologies, be it any enterprise, crop or their mix. Extension teaching aids are broadly classified as:

9.1 Introduction

Many physical parameters such as pressure, temperature, electric current etc. can be measured using polarization-modulated sensors. In these sensors modulation of state of polarization of light in the sensing region by an external stimuli takes place. A variety of physical effects influence the state of polarization of light. These phenomena are Faraday effect, electro-optic effect and photo-elastic effect. Polarization modulated sensors, in some cases, offer significant advantages not only over conventional sensors but also over widely used fiber optic interferometric sensors. These sensors require control over the state of polarization of light entering the sensing region of the fiber. Thus, for these sensors, highly birefringent fibers or single mode fibers are used. In this chapter we shall first discuss magneto/electro-optic effects and then shall describe sensors for the measurement of electric current/ magnetic field, voltage, pressure, temperature etc. utilizing polarization modulation.

10.1 Introduction

There are very few frequency modulated fiber optic sensors. This is because frequency modulation of light occurs under a limited range of physical conditions. The principal one is based on Doppler effect. There are few other circumstances under which the frequency of light is modulated. These include luminescence and Raman scattering. Luminescence has been included in chapter 7under fluorescence based sensors. In this chapter we shall focus on the sensors based on Doppler effect and Raman scattering. In particular, we shall discuss the measurement of blood flow velocity, colloidal particle motion and Raman spectrum using optical fibers.

11.1 Introduction

In previous chapters we have described fiber optic sensors based on intensity and phase modulations. These sensors have some problems in practical applications that need to be solved. Some of these are fluctuation of light source power, loss in couplers, scattering and absorption effects that affect measurement performance, temperature drifts and vibrations. In comparison to intensity and phase modulated sensors fiber Bragg grating (FBG) sensors have following advantages:

High resolution

Insensitive to intensity fluctuation because the signal obtained from an FBG sensor is encoded directly in wavelength domain.

Provision of well localized sensing region

Linear output as a function of the measurand

The capability of multiplex many sensors along one fiber

12.1 Introduction

Among a variety of optical evanescent wave techniques, spectroscopies based on the resonant excitation of surface plasmons have matured into a widely accepted surface analytical method used in different fields. Liedberg et al¹ were the first who demonstrated the exploitation of surface plasmon resonance (SPR) for chemical sensing. Since then the SPR sensing principle has received much attention. In this chapter we shall first describe the principle of this technique and then few sensors that have utilized this phenomenon.

INTRODUCTION

China aster is one of the most popular annual flowering plant grown throughout the world. Among annuals it ranks next to chrysanthemum and marigold and is grown mainly by marginal and small farmers. It can easily be grown in the open fields and lath houses for the roduction of cut flowers Cut asters last long and are used in vases and floral decoration. When asters are grown in large mass, they make very showy bedding plants and are valuable for filling up the gap in mixed herbaceous border. The dwarf types are put in front and the taller behind.

Some strains are used as pot plants, while dwarf cultivars are suitable for edging and window boxes. The prominent colours of flowers are blue, violet, lavender, rose, white, etc. In tropical and subtropical countries aster is extensively grown for bedding and cut blooms during winter month and spring. China aster is one of the most important traditional flowers in India and has maximum use for traditional purposes. The commercial importance of China aster is increasing in India especially in Karnataka, Tamil Nadu, West Bengal and Maharashtra.

INTRODUCTION

Marigold is an important flower crop and constitute as one of the five most commonly cultivated and used flower in urban and rural India. They are extensively used for making garlands, beautification and other purposes i.e. pigment and oil extraction and thera eutic uses A art from these uses marigold is a widely grown plant in gardens and pots. It is highly suitable as a bedding plant, in a herbaceous border and is also ideal for newly planted shrubberies to provide colour and fill the space. French marigold is most ideal for rockery, edging, hanging baskets and window boxes. Flowers remain fresh for 4-5 days at room temperature and are used for religious offerings and social functions. Recently marigolds are grown commercially for extraction of carotene pigments mainly xanthophylls. The carotenoid extracted from petals are added to poultry feed for intensification of yellow colour of egg yolk. Lutein which is the major constituent of xanthophylls is used for colouring food stuffs. Purified extract of marigold petals containing lutein dipalmitate is marketed as an ophthalmologic agent under the name adaptinol. Dietary carotenoids can be used to treat cancer and photosensitivity diseases.

Marigold leaves contain a distinct odoriferous oil. Wild marigold (Tagetes minuta) oil has valuable and precious essential oil which is used in high grade perfumes and cosmetics. Ketones present in the oil are base material for synthesizing aroma chemicals. Marigold essential oil has bronchodilatory, tranquilizing, anit-inflammatory as well as insect repellent activities. The floral extract of marigold is used for treating eye diseases and ulcers.

1.    Which of the following plastic film is not utilized for metalized flexible packaging?

(a) Polyester

(b) Low-density polyethylene

(c) Bakelite

(d) PVDC

2.    Tin-coating applied to steel base is carried out by

(a) Hot- dipping method

(b) Electrolytic deposition

(c) Cold-dipping method

(d) None of these

Mushrooms are most ancient, best known and greatly admired fleshy macrofungi. Mushrooms are delicacies, much sought after and greatly valued foods. Wild mushrooms are mostly found in forests, tree trunks, pastures, lawns and road side during winter season and appear at surprising speed. Mushroom hunting or gathering is a popular hobby in Western countries. The wild mushrooms may be edible or unpalatable or poisonous. Poisoning by wild mushrooms is common and may be fatal or produce merely mild gastrointestinal disturbance or slight allergic reaction. The term toad stool is popularly reserved for inedible or poisonous mushrooms, but this classification has no scientific basis. This alarming term keeps many people away from these foods. It is important that every mushroom intended for eating be accurately identified. Mushrooms vary in colour, size, shape, growth habit, yielding ability and other characteristics.

STRUCTURE: Mushrooms are the fleshy fungi which constitute a major group of lower plant kingdom. Mushroom is the conspicuous umbrella-shaped fruiting body (sporophore) of certain fungi of the order Agaricales in the class Basidiomycetes but also of some other groups. Popularly, the term mushroom is used to identify the edible sporophores. The edible reproductive part consists of a stem and a cap. Gills found on the underside of the cap, are arranged like spokes in a wheel. The gills bear multiple spores which start new fungi. The sporophore emerges from an extensive underground network of fine thread like white growth known as mycelium. The mushroom, fruit body produced basidiospores at the tip of club like structures, called basidia, which are arranged along the gills of the mushroom. Beneath the mushroom, in the soil, is the mold colony itself, consisting of a mat of intercoiled hyphae, sometimes several feet in diameter. The mushrooms first appear as white tiny ball consisting of short stem (stipe) and a cap (pileus) which begins to open up like an umbrella. The delicate membrane or Veil (velum) enveloping the cap tears off, if allowed to develop fully, and lamellae (gills) radiating from the stalk into the cap become visible. These gills become darkened as the basidiospores (seeds) develop into millions and fall in the ground for starting their life cycle once again for second generation of mushrooms.

11.1. FRUITS-Maturation, Ripening and Storage

Fruits are natural foods containing substantial quantities of essential nutrients and the best sources of minerals like sodium, potassium and magnesium, vitamins (antioxidants), such as vitamin A, C and enzymes. They are rich in fructose and water. Fruits are living biological entities that perform a number of metabolic functions. Two functions of particular importance in fruit processing are respiration (the breaking down of carbohydrates, giving off carbon dioxide and heat) and transpiration (the giving off of moisture). Senescence is the period when chemical synthesizing pathways give way to degradative processes, leading to aging and death of tissue. Fruit ripening is thus the result of many complex changes, some interactive but many independent of one another. Once the fruit is harvested, respiration and transpiration continue, but only for as long as the fruit can draw on its own food reserves and moisture. It is this limited ability to continue vital metabolic functions that defines fruit as perishable.

Microorganisms (or microbes) are organisms too small to be seen with the naked eye. The science of microbiology is the study of microorganisms, their properties, classification, growth requirements, method of reproduction and distribution in nature. These organisms range in size from tiny viruses to larger bacteria, protozoa, algae, fungi and some of the microscopic worms (helminthes). They are present everywhere in our environment, in our homes, on our bodies, on the things we touch and on the food we eat. They are important for human survival on Earth, playing an essential role in many processes that maintain life. In nature, microorganisms carry out a number of important functions.

1.They are responsible for the decomposition of organic matter.

2.Recycling of nutrients that help to maintain the balance of chemicals in the soil.

3.Special nitrogen-fixing bacteria live symbiotically with certain plants, absorbing nitrogen from the air and converting it into compounds which can be used by the plant for growth.

4.Some algae are capable of photosynthesis, using energy from the sun to convert carbon dioxide in air into carbohydrate.

5.Marine microorganisms form the basis of the food chain in lakes, rivers and oceans.

6.Certain microorganisms are used in the manufacture of food.

7.Pharmaceuticals and drugs.

8.Industrial processes.

9.A valuable tool for scientific research.

10.Use in laboratory experiments to understanding metabolic pathways and in the discovery of the genetic code.

Growth of a microorganism implies an increase in amount of protoplasm, formation of new structures and eventually formation of new cells. Balanced growth means cell components increase in proportion to each other and unbalanced growth means cell components increase in a non constant relationship to each other

Microbial growth and growth curve

Phases of growth

When bacteria are grown in the laboratory in liquid medium, the medium becomes cloudy or turbid. It is possible to measure the increase in numbers of bacteria at various time intervals and plot the values on a graph representing a growth curve.

Lag Phase: When cells are first inoculated into fresh medium containing all the nutrients they require, they take a short time to adapt before they start to divide. This is termed the lag phase.

Sterilization is defined as the process by which an article, surface or medium is freed of all living microorganisms either in the vegetative or spore state.

Disinfection means the destruction or removal of all pathogenic organisms, or organisms capable of giving rise to infection. Chemical disinfectants which can be safely applied to skin or mucous membrane and are used to prevent infection by inhibiting the growth of bacteria are called antiseptics.

Five main methods are used for sterilization. 1. Red heat (flaming) 2. Dry heat (hot air) 3. Moist heat 4. Filtration 5. Radiation.

The killing effect of dry heat is due to protein denaturation, oxidative damage and toxic effect of elevated levels of electrolytes. The lethal effect of moist heat is due to the denaturation and coagulation of protein. In the case of spore, steam condenses on it, increasing its water content with ultimate hydrolysis and breakdown of the bacterial protein.

Physical Methods of Food Preservation

Conditions too stressful for microbial growth can damage cells. Food environments can be manipulated to inhibit or kill microbes. Physical manipulation of foods can inhibit microbial growth, kill cells, or mechanically remove them from the food. Dehydration, refrigeration, and freezing inhibit microbial growth. Microbes can be killed by heating or ultraviolet (UV) or ionizing radiation. Non thermal energy is also lethal. Membrane filtration removes microbes from liquid foods. This chapter discusses all these physical preservation methods

Physical Dehydration Processes

Drying

When foods are being dried, hot air evaporates the water and carries it away. Both the drying temperature and the decreased water activity (a_w) affect the microbes.

During the initial period of drying, the temperature is still low and the relative humidity is high. The size and composition of the food particle determine the length of this phase. If this particle size is large and the material is dense, this phase can be long, allowing microbes to grow. During later phases of drying, the temperature is high but the relative humidity is low. This provides no opportunity for growth but is not very lethal either. The higher temperatures result in lower moisture content, and dry heat is less lethal than wet heat. If the drying lasts long enough (at least 30 min.), there are time-temperature combinations that kill microbial cells. With certain drying methods, the surface temperature may reach 100°C, while internal temperature remains lower. This kills surface microbes, but not those in the food’s interior.

14.1 Introduction

The increasing human population and changing life styles have resulted in a huge demand for processed and packaged foods. As a result of this demand, large amounts of water, air, electricity and fuel are consumed on a daily basis for food processing, transportation and preservation. Although not one of the most heavily polluting, the food industry does contribute to the increase in volume of waste produced [1]. There is an increasing pressure from regulatory bodies through incentives, legislation and financial penalties to minimize waste generation and encourage adoption of eco-friendly options for waste management. Nanotechnology is a panacea for food waste management.

Detailed information on tectonic evolutionary history of the Bay of Bengal is presented followed by elucidation of these characteristics towards tsunamigenesis in this chapter. The Andaman-Nicobar Island Arc (ANIA) is situated on a 1000 km long plate margin and represents a key region in the developing oceanic crustal area of Bay of Bengal. Frequent earthquakes including the tsunamigenic earthquake of 26th December 2004 off the coast of Sunda take place in this region. The subduction of Indian plate under Myanmar-Thailand plate drives formation of chain of Andaman-Nicobar group of Islands. These oceanic crust formation, subduction and arc formation are all seismigenic and generate shallow focus earthquakes in the Bay of Bengal. It is also observed that the seismicity is decreasing as the bathymetry increases towards SW of the Bay of Bengal. Thus, in long term, the slow accumulation of stress as tectonic plates converge may result in many more earthquakes in this region. After a dormancy of over 100 years, the Barren Island volcano renewed its activity following recent earthquakes. The seismic activity along the Andaman-Nicobar trench is continuing with earthquakes of magnitude varying from 4.8 to 7.2 Richter scale. All these observations suggest resurgent and intense tectonic and volcanic activities due to which allied hazards such as tsunami may take place in future.

INTRODUCTION

The evolving Earth, depending on its heat flow pattern in the mantle throughout geological time, had passed through stages, which are diagnosed through characteristic geodynamic signatures. This chapter focuses on a very active region in the crust, namely, the Andaman-Nicobar Island Arc (ANIA) to recognize such signatures and decipher relative safety of surrounding regions including east coast of India. As similar active arc systems such as Sunda Arc & Japan Arc generate volcanic, seismic and tsunami hazards, understanding the ANIA would be of help assess safety of surrounding regions. Abundant geoscientific literature exists on the northern part of the Indian plate, which is undergoing compressive stress since collision between the Indian and Eurasian plates about 55-45my. However, the behavior of remaining part of the Indian plate underneath the Indian Ocean is still sparcely studied. Owing to these reasons, this chapter attempts to fill the gap in our understanding as well as to assess the implications of renewed phases of geohazard occurrences including that of catastrophic earthquake and tsunami of 26^th December 2004.

This chapter introduces the readers about volcanoes and associated features and hazards. Volcanic disasters are like any other geohazards in causing dangerous impacts. However, volcanic explosions are preceded by many surficial expressions that can be detected through satellite imageries, thermal sensors, change in magnetic and gravity anomalies, disappearances of vegetation, sudden appearances of anomalous water vapor, thermal springs and abnormal behavior of animals. Hence, unlike other geohazards, volcanic hazards could be forecast with fairly accurate time limits that may allow evacuation and precautionary safety measures. While avoidance is the best mitigation measure, proper land use planning, provision of scientifically designed damming and diversion methods could save lives and infrastructure from lava flows. Though, atmospheric contamination by volcanic gases, ash cloud and pyroclastic materials could not be thwarted and controlled and thus they could cause havoc.

INTRODUCTION

The term “Volcano” is derived from the name of Roman mythical God of fire “Vulcan”. A volcano is an opening of different shapes, through which, molten rock and gas get ejected either violently or simply flow over earth’s surface. The molten rock and gaseous materials are drawn from deep inside of crust or mantle of the Earth. Repeated ejection of molten materials through vent, fissures or plate margins forms volcanic mountains on earth’s continental or submarine regions.

Volcanism is a threat not only to the lives and infrastructure, but it also drastically alters landscape, impacts atmospheric quality and renders forests, cities and villages and cultivation lands useless. In addition, volcanic eruptions are capable of causing changes in global atmospheric cycles. For example, the eruptions of El Chicho’n in Mexico in 1982, Laki volcano in Iceland and Asama Volcano in Japan in the year 1783 and Krakatau volcano of Japan in the year 1883 have all impacted global climate and atmorpheric dynamics.

This chapter explains how natural disasters are major catastrophic events, which are often aggravated by human intervention, resulting in adverse conditions affecting both natural resources and human habitats. Though drought is as disastrous as any other geohazard, it differs from other geohazards such that it is a ‘creeping phenomenon’, making its onset and end difficult to determine. Only a continuous monitoring of critical parameters ranging from crop failure to joblessness and shifting population, etc, could indicate drought in an area. In this chapter, we demonstrate a GIS based drought forecasting and monitoring model taking Gubbi Taluk of Karnataka as a case study. The approach includes creation of a spatial database of 17 critical parameters and their integration in GIS environment by developing a suitable rating and ranking scheme for the generation of drought severity map. The results have shown that drought could be monitored with the studied parameters and if suitable remedial measures are implemented, their effectiveness could also be monitored with this GIS model.

INTRODUCTION

India is a large country in terms of geographical area, exhibiting greater agro-climatic variation. The country is susceptible to several natural disasters, which are a major constraint to developmental activities. 

reach out their fingers it is gone” - Chinese Philosopher Lao Tzu Tao Te Ching. True to his verses, geohazards are phenomena regulated by the law of natureand it is beyond the human intellect to understand thoroughly and capability to conquer. This is the lesson learnt by us from so many incidences that geohazards cause greatest havoc wherein natural processes are going on and are inhabited by humans. Greed for natural resources and population pressures on the earth’s resources are the causes of many a catastrophic event. Examples in this regard are galore including, damning river courses and location of urban centers along rivers and coasts – flooding, cyclonic storms, tsunami hazards; alteration and deforestation hill slopes for agricultural and construction activities – landslides; unscrupulous utilization of ground water resources – drought, etc. This chapter is an attempt to draw the attention of human communityasa whole toturn towards learning to live with the nature without alterning the natural processes to get rid of impacts of geohazards as a best ever mitigation measure. In other words, this chapter attempts to emphasize the need to change our attitude to escape from natural hazards instead of attempting to tinker around natural processes only to get battered at the end.

INTRODUCTION

Oxford English dictionary states that the word ‘disaster’ is derived from the 16^th century French word ‘disastre’, which is a combination of two terms namely, ‘Des’ meaning bad or evil and ‘astre’ means star. Thus “desastre” signifies a ‘bad star’ or ‘evil star’. Disaster, therefore, implies loss or damage occurring due to some unfavorable star. However, in terms of modern knowledge, the word ‘disaster’ denotes any odd event, whether natural or man made, which can bring about sudden and great miseries to humanity in the form of loss of life or/ and property.

7.1 Introduction

The earth's crust is made up of igneous, sedimentary and metamorphic rocks. Each variety of rocks exhibit some columnar joints in Igneous rock, characteristic structures like bedding in sedimentary rocks and fabrics like schistosity and gneissosity in metamorphic rocks.

As a result of tectonic activities in nature, rocks may suffer deformation, rupture, dislocation of beds (Fault) or other planar structures.. The whole study of such deformation is known as structural Geology. It has been observed that sedimentary rocks are most suitable for studying structures, because these rocks are deposited in quiet environment, and initially the beds arranged in horizontal position. As a result of stress due to kinematic movements/tectonism, the horizontal beds tend to deviate from their horizontal disposition to dipping position or get folded or faulted. Thus the rock develops various kinds of structures. There are following structures present in sedimentary rocks:

Abstract

Visualisation of geological process raises special issues for scientists and animators. The degree of physical movement of a rising arch or along a fault line may be very small compared to the normal terrain variation. Over a long time period the major changes in the environment may come from the more substantial surface manifestations of changing draining regimes. In Tamil Nadu State in South-Eastern India there are continuing tectonic movements arising from the collision of the subcontinent with the greater Asian land mass. Over comparatively recent times (7000 years) these movements have had a major impact on drainage and other hydrological outcomes. The Cauvery River in particular has migrated several hundred kilometers over this period. A mosaic was made from recent satellite imagery and then manipulated to create surface textures for dates between -7000 years and +1000 years. Changes in the terrain surface, such as rising arch structures and descending grabens, have been modelled and animated. The combination of terrain movement and surface change provides a visual history of the period.

Introduction

The continued northward movement (5±6 mm per year) of the subcontinental land mass of India induces substantial tectonic pressures all over India. In the southeast, primarily within Tamil Nadu, there is significant differential movement, both vertical and horizontal, of portions of the existing land mass. This is producing a number of effects:

Abstract

Indian Peninsular shield has been thought as tectonically inert and aseismic for many years by the Geoscientists. But, subsequent to the disastrous earthquakes in Killari, Jabalpur and Kutch, studies have been initiated in multiple directions on various aspects of seismicities. The present study is aimed at bringing out a possible picture on the seismic vulnerability of parts of Westernghats of Tamil Nadu using various tectano geomorphic anomalies like unifrequency lineaments and different levels of dissection of plateaus, denudational geomorphic anomalies like anomalous talus materials and fluvial geomorphic anomalies like radial drainages, compressed meanders, eyed drainages and wider flood plains interpreted from the raw and digitally processed Landsat TM and IRS P6 LISS-III satellite datasets. The subsequent generation of individual GIS layers on these anomalies and their integration revealed that the N-S faults are tectonically active and the NE-SW and NNE-SSW faults are active faults. Many earthquake epicenters were also found to fall along these lineaments / faults.

Introduction

The Indian peninsular shield, exposing the Archaeozoie - Proterozoic piles of rocks, is known for its tectonic inertness and the related land stability. Owing to such shield area character, the geoscientists were also having strong convictions for a long time that seismically the area is safe.

Macroeconomic policy : Top-down policy by government and central banks, usually intended to maximise growth while keeping down inflation and unempoyment. The main instruments of macroeconomic policy are changes in the rate of interest and money supply, known as monetary policy, and changes in taxation and public spending, known as fiscal policy. The fact that unemployment and inflation often rise sharply, and that growth often slows or gdp falls, may be evidence of poorly executed macroeconomic policy. However, business cycles may simply be an unavoidable fact of economic life that macroeconomic policy, however well conducted, can never be sure of conquering.

Macroeconomics : The big picture analysing economy-wide phenomena such as growth, inflation and unemployment. Contrast with microeconomics, the study of the behaviour of individual markets, workers, households and firms. Although economists generally separate themselves into distinct macro and micro camps, macroeconomic phenomena are the product of all the microeconomic activity in an economy. The precise relationship between macro and micro is not particularly well understood, which has often made it difficult for a government to deliver well-run macroeconomic policy.

Managed Care : Managed care is a livestock health care plan that integrates the financing and delivery of livestock health care services by using arrangements with selected health care providers to provide services for covered individuals. Plans are generally financed using capitation fees. There are significant financial incentives for members of the plan to use the health care providers associated with the plan. The plan includes formal programs for quality assurance and utilization review.

Pandemic : An epidemic occurring over a very wide area (several countries or continents) and usually affecting a large proportion of the population.

Partial Evaluation : Partial evaluations constitute a number of economic study types which consider costs and/or consequences, but which either do not involve a comparison between alternative interventions or do not relate costs to benefits.

Participation bias : People who participate in a study, especially volunteers, may be systematically different from those who do not, in a way that can affect the response to a treatment. For example, if volunteers are chosen to test the effects of a vaccine, one might find a lower incidence of disease in this population simply because they are more health conscious than those who would not volunteer for such a study.

Path dependence : History matters. Where you have been in the past determines where you are now and where you can go in future. Indeed, even small, apparently trivial, differences in the path you have taken can have huge consequences for where you are and can go. In economics, path dependence refers to the way in which apparently insignificant events and choices can have huge consequences for the development of a market or an economy.

Goat anatomy

Understanding of the basic structure and functioning of goats is required to maintain the health and productivity of goats. Anatomy deals with the form and structure of the animal whereas physiology deals with the mechanism of body functions.

The skeleton of goat is made up of the vertebral column, ribs and skull, the limbs, and the joints. There are 7 neck (cervical) vertebrae, 13 chest (thoracic) vertebrae, 6 or 7 lumbar vertebrae, 4 pelvic (sacral) vertebrae and between 4 and 8 tail (coccygeal) vertebrae.The ribs are elongated, curved bones that form the ribcage, which is the skeleton of the thoracic cavity (chest). There are 13 pairs of ribs attached to each side of the thoracic vertebrae. Most of them are fixed i.e. they are joined to the sternum (breastbone) at the front of the chest but the last two pairs are not attached at the front and are called floating ribs.The skull includes all the bones of the head. It consists of a number of flat bones that form immovable joints, most of which disappear with age; and a lower jaw bone (mandible), which forms movable joints with the other parts of the skull.The limbs include forelegs (thoracic limbs) and hindlegs (pelvic limbs). The forelegs consist of shoulder,forearm and a lower limb made up of carpus,metacarpus and phalanges. The hind legs consist of pelvic girdle, thigh, and a lower limb made up of tarsus, metatarsus and phalanges.

The joints are where two or more bones of cartilages meet. There are two main kinds of joints.Fixed or immovable joints have no joint cavity and are united by fibrous tissue or cartilage. Many of these are temporary joints which become fixed as calcium accumulates in the flexible tissues and turns to bone (calcifies) with age. Examples are the joints in theskull, the joints of ribs to vertebrae, and the pelvic and mandibular symphyses (midline joints).Movable joints have a joint cavity surrounded by ajoint capsule. There are two opposing bone surfaces,which have smooth surfaces of very dense bone.

Movable joints have cartilages between the bones to reduce friction and absorb concussion. The inner lining of the joint capsule is the synovial layer, which produces synovial fluid (joint fluid). Examples include joints of the limbs, such as the shoulder and the hip, and the joint between the skull and the vertebral column.

Meat is animal flesh that is used as food. Most often, this means the skeletal muscle and associated fat, but it may also describe other edible tissues such as organs, liver, brain, bone marrow, kidney, or lung. Meat is a nutrient dense food. Meat contains protein, fat, enzymes, vitamins and minerals for proper human nutrition. Goats are important producer of meat besides milk, fiber and skin. Goat meat is lower in calories, total fat, saturated fat and cholesterol, than traditional meats.Goat have number of characteristics , such as high reproductive potential , short generation interval , ability to thrive on shrubs, bushes and tree leaves, high digestive efficiency for cellulose and less susceptibility to infectious diseases, that make them suitable as meat producing livestock. Since these animals are more concentrated in the developing part of the world, they play a major role in subsistence agriculture of developing economies of poor and marginal farmers inhabiting such countries. More than 95 % of goats are concentrated in dry tropical and subtropical areas of poor agricultural potential and even on marginal lands of the world (Morand Fehr and Boyazoglu, 1999). Goat has several other advantages as producer of meat which make it predominant and preferred animal for meat production. Often because of the above mentioned reason, goat meat is sold two to three times costlier as compared to pork in India. Beef is unavailable in India with the exception of Kerala and West Bengal. Goat meat has an edge over mutton too, as the number of goats slaughtered for meat purposes (40%) far exceeds the number of sheep slaughtered for similar purposes. The slaughter rate of goat is at the level of 39.7 % as compared to 31.8% for sheep and 11% for buffaloes, respectively. Sheep and goat meat are both called “mutton” in India. Goats convert the poor quality roughage, browse tree leaves, which would have otherwise gone waste, into valuable source of protein in several desert or hostile areas of the world where other classes of livestock like cattle and buffalo will starve to death. Goat meat production and consumption has an important place in the economy of Asian and African countries. Goats have been recognized as an important source of meat in the rural areas of these countries. Commercial meat-goat enterprises account for majority of the meat-goat production systems and herd sizes range from five to several thousand does. Prolificacy, milk production and pre-weaning growth are important in achieving good productivity of commercial meat production enterprises.

Present day hydrogeomorphological research is the explanation of landscape and landforms: what they are, how they function and have developed with reference to the hydrological conditions. Research is a much more complex undertaking than giving names to landforms or even the study of processes, both in terms of what we mean by process and how explanations are approached. It is worthwhile examining some reasons for this, as it shows the increasing complexity of the subject and lead to ideas of how hydrogeomorphology can be studied. Here are some of the fundamentals required for hydrogeomorphological studies:

Mechanism and Processes

‘Mechanism’ provides explanations in detail by describing physical or chemical effects. ‘Process’ signifies the integration of mechanisms in time. Thus, for example when we talk about ‘fluvial process’ or, more specifically, about the ‘mechanism of saltation’, then we have to discuss about the energy source and processes of carrying the material. A process can thus be viewed as the simultaneous operation of a set of specific mechanisms over a specific time period.

DISEASES OF RABBITS

The Disease Occurrence in rabbit colony is minimal if good sanitation and hygiene measures are followed.

Diseases are caused by Bacteria, Viral, Parasitic and managemental.

Bacterial Disease

Pasteurellosis → similar to Haemorrahgic septicaemia

Organism → Pasterurella multocida

Affects respiratory system with difficulty in breathing. Temperature 103 ° F Occulonasal discharge observed.

Lab → Blood smear shows bipolar organisms by Giemsa stain.

Treatment → Sulpha drugs, long acting tetracyclines.