eChapters

Soil Density

The density of a soil, as any other matter, is its mass per unit volume. However, in case of soil, because of its unique nature, the density can be expressed by two terms, viz., bulk density and particle density. Soil density is typically expressed in mega gram per cubic metre (Mg m^-3) which is numerically equal to g cm^-3.

Soil Consistence Defined

Soil consistence is the strength with which soil materials are held together or the resistance of soils to deformation and rupture. Soil consistence is measured for wet, moist and dry soil samples. For wet soils, it is expressed in terms of both stickiness and plasticity. Stickiness is the ability of soil materials to adhere to other objects. Plasticity is the ability of the soil materials to change shape continuously under a constant pressure and to retain the impressed shape when the pressure is removed. Soil consistence may be estimated in the field using simple tests or may be measured more accurately in the laboratory.

Soil Structure Defined

Soil structure is defined as the arrangement of individual soil particles with respect to each other into a pattern. Structure describes the gross, over-all arrangement ofthe soil solids. In other words, soil structure is the ‘architecture’ of a soil.

Soils are composed of structural units, called “peds”. The peds consist of many individual particles, bound together by cementing agents like organic matter, clay and hydrous oxides of iron and aluminium. However, the strength of the bonds, the size and shape of the peds and the proportion of the soil particles involved in the peds differ considerably among soils.

Physical properties of a soil greatly influence plant growth. The plant support, root penetration, drainage, aeration, retention of moisture and availability of plant nutrients are all linked with the physical condition ofthe soil. The physical properties of a soil which depend on the amount, size, shape, arrangement and mineral composition of its particles, also influence its chemical and biological behaviour.

Soil classification, or soil taxonomy as it is called, is grouping of soils in an orderly and logical manner based on soil properties (differentiating characters) for the purpose of studying and identifying them. The following are the purpose of soil classification:

To organize our knowledge of soils

To bring out and understand the relationships among the soils

To remember the properties of soils

To learn new relationships and principles in different soil groups

There are over 100,000 different types of soil in the world, each with its own set of characteristics. If any soil is dug deep, one can see that it is made of layers, or horizons. The horizons together form a soil profile. Each profile tells a story about the life of a soil.

The development of soil profile is a constructive process where in disintegrated materials resulting from weathering of rocks and minerals get converted into a soil body. Soil Individual or Polypedon is a natural unit of soil that differs from its adjoining unit on the landscape in one or more properties. In modern soil taxonomy, polypedon is the unit of soil mapping. Apedon is the smallest volume recognizable in nature that can be called “a soil”.

The pedogenic processes are dynamic and extremely complex involving several chemical and biological reactions, usually operating simultaneously in a given area. One process may counteract another, or two different processes may work in tandem to achieve the same result. Different processes or combination of processes operate under varying natural environments. The combined interaction of various soil forming factors under different environmental conditions set a furtherance to certain recognized soil forming processes. Pedogenic processes include:

Soil formation takes place in two consecutive stages:

1. The weathering of rocks into regolith

2. The formation of true soil from regolith

The evolution of true soil from regolith takes place by the combined action of soil forming factors and processes. The first step is accomplished by weathering (disintegration and decomposition) and the second is associated with the action of soil forming factors which are known as pedogenic factors.

Rocks and minerals formed under a very high temperature and pressure, when exposed to atmospheric conditions of low pressure and low temperature, they become unstable and weather. Soils are formed from rocks through the intermediate stage of formation of regolith (parent material) which is the resultant of weathering.

Mineral

A mineral is defined as “a natural substance, usually inorganic, having a definite chemical composition and commonly a definite molecular arrangement which is usually expressed in geometric form”.

Rock

A rock may be defined as “an aggregate of one or more minerals”. An aggregate of single mineral calcite gives rise to crystalline limestone. Granite is a combination of several minerals. Most rocks are hard and compact as granite and basalt, but some are loose and feebly aggregated as sandstone. Rocks possess certain characteristics such as structure, colour, specific gravity, cleavage and mineralogical make-up by which we can identify the rocks and also distinguish one from the other.

During the 19^th century various hypotheses were advanced about the origin of earth. These hypotheses can be grouped into two general classes:

1. Monistic hypotheses: The pioneers of this hypotheses believed that only one mass or body was responsible for the creation of the solar system. The representative of this theory is Nebular hypothesis. The advocates of this hypothesis were Kant and Laplace.

2. Dualistic hypotheses: The advocates of this hypothesis believed that two separate masses or bodies were responsible for the creation of the solar system. The representatives of this hypothesis are Planetesimal hypothesis and Tidal hypothesis. The pioneer of Planetesimal hypothesis was the great English scientist T. C. Chamberlain. The Tidal hypothesis was advocated by another English geographer named James Jeans.

“SOIL” the term is derived from Latin word “solum” which means, “floor”. Soil has been a defining component of humanity since the beginning of civilization. It holds the clues of past cultures, it supports the web of life connecting all ecosystems, provides materials to build houses, and provides the base for our food, feed, fiber and even some biofuels.

Soils are complex mixtures of minerals, water, air, organic matter, and countless organisms that are the decaying remains of once-living things. It forms at the surface of land and is the “skin of the earth.” Soil is capable of supporting plant life and is vital to life on earth. There are several general roles that soils play:

1. Choose the most appropriate option with a tick mark

i) Floating plants are required for breeding

a) Guppies

b) Angel fish

c) Swordtail

d) Gourami

ii) Breeding traps are generally used for

a) Egg-scatters

b) Egg-depositors

c) Livebearers

d) Nest-builders

Ornamental fish culture has made giant strides in many countries in recent years. The industry is growing in leaps and bounds with involvement of even increasing number of aquarium hobbyists. A lucrative export market and high domestic demand have made ornamental fish industry a potential source for income generation. The range of species of ornamental fish available to the hobbyists is very large, with estimates of up to 1,500 species. As popularity of ornamental fish keeping has gained momentum, the need to transfer ornamental fishes from the resource abundant places to resource deficient places resulted in the marketing of ornamental fishes. In order to assess the marketing opportunities for ornamental fish, it can be classified as:

The purpose of managing a fishery is to maintain the resource so that it is renewable and therefore sustainable. Responsible aquaculture practices rely on sustainable production systems, to minimize impacts on the natural environment, and support resource conservation. In other words, the harvest of fish from the wild or their domestic culture, if performed with sound foundations of ecological and economic principles, can be sustainable and self-reliant commercial industry. In traditional subsistence fisheries, fishermen use primitive and inefficient gear to capture most ornamental fish. However, the supply of aquarium fish is not inexhaustible, and signs of over-fishing are becoming apparent in localized areas. With high demand and pricing of many beautiful species, ornamental fish are being harvested at greater volumes and higher rates, threatening the viability or sustainability of the fishery. Most endemic and sensitive species are restricted to very narrow specific habitats. Their survival, affected by physical over-exploitation for the aquarium trade, may be further hit by habitat alteration. No comprehensive studies have been carried out on the requirements of these endemic or sensitive exported species. In the absence of suitable impact studies, it is not possible to predict the impact of habitat alteration on these species. Exporters target more colorful varieties and since their ecological significance has not been studied, what long-term effect such selective exploitation will have on genetic diversity cannot yet be defined.

Apart from legislation that can be effectively implemented, eco-physiological and population studies of a quantitative nature are urgently needed to advise on the collection, maintenance and transport conditions that need to be followed by exporters to safeguard collected stocks from unnecessary mortality. Exporters are eager to learn and would be receptive to receiving appropriate, scientifically formulated, well-meaning practical advice. Studies should be targeted towards this end since it seems unlikely that the export trade can at present be voluntarily modulated on the basis of conservation requirements. Such a strategy could only become feasible after an adequately robust ecological database has been compiled, which would necessarily require time.

An effective management strategy needs to address not only aquarium-trade related matters but also policy and other matters in an integrated approach if we are to be hopeful of sustaining the ornamental fish industry in the long-term.

Ornamental fish breeding and trade provide excellent opportunities for employment and income generation. One of the most critical determinants of the success of the trade is the problem of delivering a quality product to the market. The know-how of collection, critical handling, packaging methods are essential for serving the successful transport of live tropical fish to their final destination. However, a major impediment in expanding the trade of indigenous fishes is the poor roads/communication from most of the collection/landing centres to the town, non-availability of oxygen packaging at remote collection centres, difficulties in transportation of the collected fishes to the agent/stockist. Transportation of live fish and shellfish from areas of collection to destination or from areas of farming to the destination is an important activity of ornamental fish industry.

Proper collection, packing and transportation may help in increasing trade to a greater extent. Ornamental fishes destined for marketing, both domestic and export, have to use modern post-harvest technology or modifications of the current post-harvest technology to improve the post-harvest and post-shipment survival that is critical to the industry. It is in this context that the significance of packing and transport come into the picture. To overcome the problem of high mortality of fish species at different stages during transportation, it becomes essential to evaluate the most suitable and ideal condition for transportation. At present, the mortality rate during fish catching, collection, transportation is very high. The claim by the importers due to DOA (Death on Arrival) from India is on the higher side compared to the consignments from other developing countries. This is due to the lack of appropriate technology for fish packing & transportation/ shipment. Similarly, since the airfreight charges are very high, the exporters have no idea of the optimum number of a particular live fish to be packed in a container to reduce transportation cost. Such information is lacking for Indian fishes. The success of ornamental fish transportation depends on the following steps:

Ornamental fishes are very prone to diseases due to their captive habitat. Fish health management is an important issue of concern at all the ornamental fish production facility. Proper water quality is required to be maintained in the aquarium for the good health of the fish. However, the chance of infection in these fishes is very high. Many limiting factors viz. water quality, over crowding, nutritionally imbalance food, rapid fluctuation in water temperature, lack of oxygen or poor husbandry practices influence the health status of the stock. The symptoms/signs indicate whether the fish is suffering from a particular disease or not. If the fish are observed to be swimming actively and there is no noticeable abnormality in the behaviour, it means there is nothing to worry about the health of the fish in the aquarium. On the other hand, diseased fish may look off colour, restless and/or behave erratically. In such a situation, the fish should be closely observed for visible infection and remedial measures should be taken immediately. Stock improvement in terms of disease prevention must be a top priority issue. In order to achieve healthy fish species, it is necessary to have a health management protocols in every farming practices.

As the ornamental fish industry expands throughout the world, genetic considerations have become more important in terms of production, sustainability and conservation. Genetic technologies are now being applied to increase food production in aquaculture through traditional and modern breeding programmes. Genetic markers can help to manage capture fisheries and distinguish farmed from wild stocks in mixed fisheries. Genetic technologies are also now finding application in post-harvest and trade to assist in product identification and traceability. Genetic improvement of fish has considerably increased the fish production from aquaculture. It includes selective breeding, hybridization, polyploidy, gene and nuclear engineering. For any genetic selection programme, induced breeding is the basic and initial step. Intensive selective breeding is practiced with various species of fish in perfecting appearance, shape and color so that new strains are produced.

Domestication

Most of the fish being widely grown in captivity are domesticated to some extent, but there are very few which have undergone genetic improvement. Just as terrestrial livestock and crops are bred to be not only productive, but productive in convenient proximity to humans, aquatic plants and animals are now undergoing these same pressures.

In comparison to agriculture crops, fruit plants and animals, aquaculture is much behind with regard to the domestication of the fish, especially ornamental fish. Never the less, a good number of ornamental fish have been domesticated which can be considered for selective breeding to improve their traits. The available technologies and tools could be used to remarkably speed up domestication and genetic improvement process.

Domestication implies much more than merely keeping wild animals in farms or homes. Domestication is a very long process, during which captive individuals become more adapted to captive environments. Domestication leads to permanent genetic modifications of a bred lin-eage, while taming or keeping wild fish in captive conditions is only conditioned behavioral modification of individuals. The entire life cycle of the domesticated fish species must be fully closed in captivity. Once full life cycle is completed in captivity, the process of domestication can proceed further.

The first truly domesticated fish species was certainly the goldfish, for which the domestication was initiated by the Chinese about 1500-2000 years ago.

The indigenous ornamental fish which are very popular overseas, are being harvested from the wild and exported. This in the long run, may lead to depletion of stock due to over harvesting of our valued native fish species. Hence, breeding of native fish species is also equally important for a sustainable trade of ornamental fishery and to conserve the natural stock. Some fishes breed naturally with ease, whereas others are bred by artificial techniques like hand stripping and hypophysation. In nature, the fishes are stimulated by changes in environmental factors. These conditions can be simulated to some extent in the aquaria by providing specific biological requirements for spawning.

I. Breeding of Zebra danio (Brachydanio rerio)

Brachydanio rerio is commonly known as zebra danio. The zebra danio, as the name implies, is characterized by a number of bright blue or purple horizontal lines, which run from the head to the caudal fin. This pattern is repeated in the anal and caudal fins too. The flanks have prussian blue colouration and operculum has golden blotches. The dorsal fin of this species has an olive yellow base and there are blue gold markings on the anal fin.

One of the attractions of ornamental fish keeping is to multiply the fishes in captivity. Although techniques used for ornamental fish breeding are not much difficult, the breeding methods for specific ornamental fish species are closely guarded secrets. Farmers have operated almost entirely on their own, developing their own methods and rely on many years of experimentation. In India, the most important breeding centres for ornamental species are located in Kolkata, Mumbai, Chennai and Kochi. Ornamental fishes are broadly classified into two groups based on their breeding methods- Egg layer or oviparous and live bearer or viviparous species. Oviparous fishes lay floating, adhesive or non-adhesive eggs that may be scattered, laid in bubble nests or deposited on substrates or in shallow pits. The breeding and rearing of live bearers are easier than egg layers, which begin with handling the live bearers.

Learning about water chemistry is often neglected by most of the aquarium owners. By understanding the concepts of water chemistry, they can considerably improve success rate in rearing healthy fishes. It is well known that the quality of water has a direct impact on the health of the fish. But many aquarium owners do not understand the basic internal chemistry of the water, nor do they understand how to correct it or safely adjust it. Until the basics of water chemistry is understood and some common water maintenance techniques are learnt, it will be difficult to maintain a healthy and safe environment for the fish in tank. The water quality is by far the single most important factor for the healthy fish, and the more is known, the better management is expected.

Fish depends for their basic necessities on the water in which they live. The most characteristic feature of an aquarium system is, therefore, the quality of the water available in tanks/aquarium. This water must be obtained from some source, pre-treated to make it suitable for the fish, delivered to the fish in sufficient quantities and maintained in good condition. The water supplied to an aquarium is not pure, but it contains dissolved and particulate materials, some are necessary for up keep of the fish and rests are harmful. Contamination may occur not only at source or from the animals, but often takes place within the aquarium from the materials used for its construction. The number of fish that can be maintained within the aquarium is said to be according to the quality and quantity of the water supplied to an aquarium. However, it is rarely the quantity of water per unit which limits the carrying capacity. The capacity is usually set by the requirement of dissolved oxygen and the accumulation of toxic metabolic products in the aquarium.

Feed plays a vital role not only in growth but it also enhances the market value of ornamental fish. In natural waters, fish has access to a variety of natural food items, but their overall wellbeing depends upon the availability of their favorite food. However, in a confined system, nutritionally balanced supplementary feed is indispensable due to limitation on availability of natural live fish food organisms. In general, ornamental fish are fed with a variety of commercially available pelleted feeds, imported from countries like Singapore, Hong Kong, Korea and Thailand etc. Although they are very popular among ornamental fish hobbyists, the high cost of these feeds is not economical for commercial-scale application at farmer’s level. Further, in contrast to food fish in a pond, feeding ornamental fish in smaller culture units need high precision. Therefore, it is essential for an ornamental fish producer to possess technical know-how regarding nutritional requirements and feeding behaviour of different species in order to formulate farm-made feeds by using locally available low- cost ingredients.

Formulation of low cost and nutritionally balanced supplementary feed, using locally available ingredients, is the key to the success of ornamental fish culture in India. To reduce the cost of feed and make the ornamental fish production venture more profitable, the feed can be prepared at farm by using cost-effective and locally available quality ingredients (plant/animal-based).

Identification and selection of the feed ingredients are essential and it should be according to the fish species to be cultured. A number of feed ingredients may be locally available which can be used for feed formulation. Fish culturists have to identify and choose the best ingredients, depending upon its easy availability, nutrient status and cost, keeping in mind the nutritional requirement of ornamental fish (size, feeding habits, etc.) to be cultured.

Ornamental Plants are a real attraction to the aquarium tank. While some plants are both ornamental and functional, people usually use the term “ornamental plants” to refer to plants which have no value beyond being attractive, although many people feel that the attractive value itself is quite enough. They provide optimal habitat for the fishes especially for the fry (baby fishes). It maintains the ecosystem of the aquarium tanks by providing good oxygen, food and also acts as a good hiding place for the baby fish. Mostly all aquatic plants are very easy to grow and care. They are always good for gold fish and other similar fishes. There is a huge variety of plants. Ornamental plants are grown for decoration, rather than food or raw materials. They are most often intentionally planted for aesthetic appeal. However, ornamental plants also serve some less obvious uses such as for the purpose of fragrance, for attracting wildlife and for cleaning the air. Ornamentals encompass a wide array of plants. Commonly, ornamental plants are grown for the display of aesthetic features including: flowers, leaves, scent, overall foliage texture, fruit, stem and bark, and aesthetic form. The concept of ornamental plants is used for decorative purposes in aquariums, gardens, home gardens, landscape design projects, squares, parks etc.

Aquatic plants predominantly grow in water. They vary greatly in type, with some being quite similar to common land plants while others are quite different. Aquatic plants can be commonly classified into four types: algae, floating plants, submerged plants and emerged plants. Aquatic plants live in water. This means that they require being submersed to survive or that they can only grow and thrive in water. Many aquatic plants can tolerate being emerged, meaning they’re out of the water for short periods of time, but require immersion in water for long-term survival.

There are some plants that simply can’t tolerate being emerged at all, but this is rare. These plants can only live when fully immersed in water. Most macro- algae require total submersion in water for the span of its entire life. Most aquatic plants, however, have roots underwater but can only grow or flower in a partially emerged state. All plants, aquatic and otherwise, require sunlight, soil, gases and water to survive. Plants make their own food via the process of photosynthesis; this means that they need a source of energy to drive this biochemical process, and the sun provides a perfect one. Plants can carry on for periods without sunlight, just as animals can live on stored fuel for a while in times of need. The soil offers a place for the plant’s roots to take hold.

Air contains large amounts of the carbon dioxide gas (CO2), plants need to power photosynthesis, but aquatic plants have evolved to draw in CO₂ that is dissolved in water in relatively small amounts. Finally, plants need water to combine with the CO2 to complete photosynthesis by generating oxygen and glucose.

Design and construction of farm including management is important with the advancement of cultural practices and increased involment of people. These are some common resources for breeding, rearing and display of ornamental fish.

Small scale commercial farms

Mazla/earthen vats

These are baked earthen containers and usually round in shape. These are used to keep the gravid female of livebearer fish for breeding. Its water holding capacity is 7.5-10.0 litre.

India is one among the top ten mega-diverse countries of the world in terms of fish diversity (Dudgeon 2003). FishBase (Froese & Pauly 2016) has listed around 917 freshwater fish species (out of 2465 total fish species) as occurring in India. According to National Fisheries Development Board, Hyderabad, inland and marine waters in India possess a rich diversity of ornamental fish, with over 195 indigenous varieties reported from North-East Region and Western Ghats, and nearly 400 fish species from marine ecosystems. There are several other fish species which qualify to be called as ornamental fish. Considering enormous and diverse indigenous fish resources of the country, there is immense scope for India to become a potential candidate and a strong competitor in the international ornamental fish trade. Government of India has recognized ornamental fish sector as one of the thrust areas for generating employment opportunities and augmenting our foreign exchange earnings. It is estimated that the sector is directly and indirectly supporting about 50,000 of house-holds mainly in rural India. Large number of freshwater ornamental fish species is recorded from Indian waters and the majority of the global trade is based on freshwater exotic ornamental fishes including both classified and non-classified types.

The culture of colored and attractive fish in glass aquariums for aesthetic use is called ornamental fish culture. The beautiful, tiny fishes or ornamental fishes are peaceful in nature and suitable for keeping in captivity. These lovely fishes are usually kept in a glass made aquarium and decorated with toys, plants, ceramic structures etc. for beautification. It displays the attractive fish that live in a natural environment decorated with accessories while maintaining environmental parameters in tanks/aquariums by using aerators, heaters, filters, lights to control water movement, temperature, suspended organic matter, illumination etc. besides feeding. Keeping ornamental fish in a glass tank is a very old and popular hobby. More and more people are getting attracted to this hobby and due to growing interest in aquarium keeping; it has resulted in a steady expansion in its trade in more than 125 countries. Household aquariums are more popular; therefore, less than 1% of the global market for ornamental fishes belongs to the public aquaria sector. Most of the ornamental fish is available from developing countries in the tropical and sub-tropical regions. The international trade in ornamental fish breeding and culture provides employment opportunities for thousands of rural people in developing countries. Ornamental fish is becoming an important component in Indian fisheries too, along with food fishes, for both income and employment generation. As a result of advancements in breeding, transport and rearing technology, more and more fish species are being recognized as ornamental fish almost every year. The ornamental fishery is recognized by many developing countries for employment generation and livelihoods. Ecologically suitable culture systems must be developed by evolving micro, small and medium enterprises for sustainable growth.

a. Balance Sheets or Net worth Statement

Balance sheet is the list of assets and liabilities owned by a business. It helps to calculate the growth in net worth of the business by calculating the change in assets less the change in liabilities. They represent the financial foundation on which the business is built.

The term ‘balance sheet’ implies some sort of balance as part of the document. That balance represents the relationship between assets on one side, and liabilities on the other, and the basic accounting principle that assets always equal liabilities plus equity. Since it is simply a list of assets owned and debts owed, at a given time, with monetary values attached, we must understand the concepts of assets and liabilities.

Assets are resources owned by or owed to the business such as dairy, equipment, real estate, and notes receivable. Assets are those parts of the business that are owned or controlled. They include any property/resource owned by a person or business e.g. cash, land, buildings, dairy, farm equipment and dairy-related share. Assets are usually listed on the top or on the left hand side of the balance sheet. They are classified in following ways

The art of confectionery manufacture date back to over 3000 years as per Egyptian records. Traditionally honey, boiled and concentrated sugar cane juices have been used in confectioneries. In modern times, alternative sweeteners from sources like corn and starches constitute an integral part of confectionery manufacture.

Owing to the huge variation in finished products as well as raw materials in food sector, Quality control has an extremely important role to play. Quality control aims at controlling variation to within a tolerable level by taking corrective actions. Statistical and non-statistical techniques are employed to measure, analyze and control variation in food products. Statistical process control, acceptance sampling and visual inspection are widely used in food and allied sectors.

Maintenance of quality and manufacture of a standard confectionery should involve a very close control of raw materials, instrumentation, and statistical analysis of finished product. Statistical evaluation with respect to finished product includes weight control, sensory evaluation and packaging tests. The quality standards are set by the quality control departments. Chemists may undertake preliminary analysis through visual inspection. Visual inspection is usually combined with sampling. This gives an idea of variation, cleanliness, infestation etc. in the sample.

India’s bakery market at 49.5 billion tonnes makes it the third largest market in Asia Pacific, only after Japan and Australia. 72 The bakery industry in India comprises of organized and unorganized sectors. The organized sector consists of large, medium and small-scale manufacturers who produce packaged biscuits and bread. The unorganized sector consists of small bakery units, cottage and household type manufacturing their goods without much packaging and distributing their goods in the surrounding areas. Bread market is estimated to be growing at around 7% p.a. in volume terms, whereas the biscuit market has witnessed a higher growth at around 8–10%. Within the biscuit category, cream and specialty biscuits are growing at a faster rate of 20% p.a. The per-capita consumption of biscuits in India is around 900 gm as compared to 15–20 kg. for developed countries. The consumption of biscuits is equally divided between the urban and rural population. Demand for biscuits in 2003–2004 is likely to exceed 1.2 million tonnes.

Chocolate is a product that requires complex procedures to produce. The process involves harvesting coca, refining coca to cocoa beans, and shipping the cocoa beans to the manufacturing factory for cleaning, roasting, grinding , ref ining , conching , moulding and enrobing operations which are accomplished using wide range of machinery. A few have been discussed in this chapter.

1. Bean Roasters

When cocoa beans were first brought to Europe, the method of roasting was quite simple, often consisting of no more than metal trays suspended by chains over a fire, an ancient Middle Eastern technique for roasting coffee. The beans would be stirred by hand with a long stick or paddle until the roast was complete. Needless to day, this was very labor intensive and inefficient. Clearly, something more efficient was needed. The next development in roasting technology was not that far distant from roasters in use today. Metal cylinders or balls that could hold up to several pounds of cocoa beans would be suspended over the embers of a fire. A rod would run through the center and act as an axis upon which the roaster would turn. A hand crank on one end would allow the cylinder or ball to be turned while the beans were roasting. The result was a much more even roast than was before possible. Aspects of this technique remain in many of today’s roasters.

Chemically, sugar candies are broadly divided into two groups: crystalline candies and amorphous or non crystallized candies. Crystalline candies are not as hard as crystals of the mineral variety, but derive their name and their texture from their microscopically organized sugar structure, formed through a process of crystallization, which makes them easy to bite or cut into. Fudge, creams, and fondant are examples of crystalline candies. Amorphous candies have a disorganized crystalline structure. They usually have higher sugar concentrations, and the texture may be chewy, hard, or brittle. Hard candies, such as lollipops, caramels, nut brittles and toffees are all examples of amorphous candies, even though some of them are as hard as rocks and resemble crystals in their overall appearance. Crystalline candies are chemically described as having two phases, because the tiny, solid sugar crystals are suspended in a thick liquid solution. These are also called grained candies, because they can have a grainy texture. Amorphous candies are have only one phase, which is either solid or liquid, and do not have a grainy texture, so they may be called ungrained.

Commercially, candies are often divided into three groups, according to the amount of sugar they contain:

Types of Confectionery

Confectionery also called sweets or candy is sweet food product. Confectionery is divided into two broad and somewhat overlapping categories, Bakers’ Confections and Sugar Confections. Confections are low in micronutrients and protein but high in calories. They may be fat-free foods, although some confections, especially fried doughs, are high-fat foods. Many confections are considered to give empty calories.

Baker’s Confectionery

Baker’s confectionery also called flour confections includes principally sweet pastries, cakes, and similar baked goods. In the Middle East and Asia, flour-based confections are more dominant. Baker’s confectionery includes sweet baked goods, especially those that are served for the dessert course. Baker’s confections are sweet foods that feature flour as a main ingredient and are baked. Major categories include cakes, sweet pastries, doughnuts, scones, and cookie.

Chocolate is a key ingredient in many foods such as milk shakes, candy bars, cookies and cereals. It is ranked as one of the most favourite flavours in North America and Europe. Despite its popularity, most people do not know the unique or igins of this popular treat. Chocolate is a product that requires complex procedures to produce. The process involves harvesting coca, refining coca to cocoa beans, and shipping the cocoa beans to the manufacturing factory for cleaning, conching and grinding. These cocoa beans will then be imported or exported to other countries and be transformed into different type of chocolate products.

In history, 1828 marked the “modern era” of chocolate making when Dutch chocolate maker Conrad J. van Houten patented an inexpensive method for pressing the fat from roasted cacao beans along with other processes to create a fine powder known as “cocoa”. The powder was then treated with alkaline salt that helped the powder mix with water easily. The creation of powdered chocolate made it easier to mix with water, sugar and a possible combination of other ingredients to make chocolate in solid form. Many other chocolate makers began to build on Van Houten’s success to make a variety of chocolate products. In 1894, English chocolate maker Joseph Storrs Fry produced what was arguably the world’s first eating chocolate”

Sugar confectionery and chocolate includes candies (sweets in British English), candied nuts, chocolates, chewing gum, bubble gum, pastillage, and other confections that are made primarily of sugar. In some cases, chocolate confections (confections made of chocolate) are treated as a separate category, as are sugar-free versions of sugar confections. The words candy (US and Canada), sweets (UK and Ireland), and lollies (Australia and New Zealand) are common words for the most common varieties of sugar confectionery. Confectionery depends on numerous ingredients which have been discussed in detailed in this chapter

The raw material of foremost importance in bakery product is the wheat flour. Bakery units prefer the flour obtained by milling in roller flourmill with 70– 72 percent extraction. Flour quality may be defined as the ability of the flour to produce an attractive end product at competitive cost, under conditions imposed by the end product manufacturing unit. The concept of quality differs from producer and consumer point of view. However, in general, the term quality may refer to fitness of a raw material or a product for a particular process or consumer. For a consumer, the following parameters are important criteria of a product quality.

Various types of equipment are needed and used to facilitate the process of baking. Depending upon the use, equipment may be as light equipment and heavy equipment.

All bread is made by baking a dough that has two basic ingredients, flour or meal and a liquid. Bakers can use a wide variety of both components. The most common type of flour used for bread and most other baked goods is made from wheat. Wheat flour has a pleasant taste and contains a large amount of an elastic protein substance called gluten. Gluten aids in baking uniformly light bread that rises (swells) properly. Other baking flours are made from barley, rye, corn, rice, oats, soybeans, and potatoes. These flours, particularly soybean flour, may equal wheat nutritionally, but none can match wheat for creating light, even-textured bread. Hard wheat flour makes lighter bread than does soft wheat flour because it is richer in gluten. Rye and whole wheat breads are made lighter by adding white flour. The liquids used in baking include water, sweet or sour milk, yogurt, wine, and beer.

Bread is either leavened or unleavened. Leavened breads contain some substance that produces bubbles of carbon-dioxide gas. These gas bubbles inflate the dough, causing it to rise and become light and porous. Most kinds of basic breads are leavened with a fungus called yeast. Biscuits, muffins, and cakes and other pastries are leavened with either baking powder or baking soda. Unleavened bread is dry and hard. Familiar kinds of unleavened breads include water crackers, the rye crisp of Sweden, and Jewish matzoth. Whether leavened or unleavened, most breads contain other ingredients in addition to flour and a liquid. An almost limitless variety of breads can be made by adding a sweetener, shortening, cheese, eggs, meat, fruit, vegetables, seeds, or nuts. A sweetener, either sugar or syrup, is used in almost all bread for its taste or as an aid to yeast growth. Bread may also have an external sweetener in the form of a decorative glaze. The high fat content of shortening and cheese increase tenderness and flakiness in bread. Perhaps the best example is the French croissant. Eggs help leaven bread dough by adding to the bread’s lightness. They can be brushed on top of the dough before baking to create a shiny crust, as in the Jewish hallah. Some breads from many nations contain fruit, a vegetable, meat, seeds, or nuts. Examples include the fruit scone of Great Britain, the spinach paratha of India, the Southern sausage bread of the United States, the Easter sesame bread of Greece, and the almond sweet bread of Finland.

Cakes are sweet baked products characterized by high level of sugar in the formulation and hence are foods of high calorific value. Among the various ingredient used flour, sugar, shortening and egg are the essential ingredients for cake manufacture. The optional ingredients are baking powder, milk, fruit etc. For cake manufacture the selection of ingredients is of paramount importance.

The word biscuit is derived from Danis biscoctus which is Latin for twice cooked bread and refers to bread rusks that were made for mariners (ships biscuits) since the Middle Ages. The dough pieces were baked and then dried out in another cooler oven. All biscuits are made with flour (usually wheat flour) and all have low moisture content and thereby have long shelf life if protected from moisture and oxygen. It includes items also known as crackers (that make a noise of cracking when broken), Hard sweet and semi –sweet biscuits, cookies (which is the name that originated from Dutch word koekje meaning a small cake) and wafers, which are baked between hot plates from a fluid batter. The name cookie was adopted in North America where the term ‘biscuit’ can be confused with small soda raised breads or muffins. In other countries the term cookie is used primarily for wire cut products of rather rough shape, which often contain large pieces of various ingredients such as nuts, etc. The term ‘biscuit’ is used in Britain to describe a flat, crisp, baked product; the term cookie is reserved for something softer and thicker. Cookies are made from soft wheat flour and are characterized by formula high in sugar and shortening and relatively low in water. Similar product is known as biscuit in our country. In USA the term ‘cookie’ covers any flat, crisp, baked good. Cracker is a term reserved for biscuit of low sugar and fat content, frequent bland or savoury. Crackers are usually made from developed dough whereas cookies are made from weaker flour. These foods have in common their ability to stay palatable for a long period of time. Their ease of transportation and their ready consumption without any further preparation make them high on the list of staple snacks

Baking is no different from any other area of cooking, and as in other sectors only the best and the freshest raw material can guarantee good results. So selection of right kind of ingredients is of utmost importance. Another basic need of a professional baker and confectioner is to purchase the equipment required. The design and size depends upon the volume of sale expected. So in this chapter we are going to learn about the ingredients required for running a bakery.

Types of Bakery Products

Baked goods are produced from either doughs or batters which are a mixture of flour and water made by mixing, beating, kneading or folding. The processing method depends on the ingredients being used and the product being made. Bread is either leavened or unleavened. Leavened bread is made from a mixture of flour, yeast, salt and water. Unleavened bread does not contain yeast and therefore does not rise. It is flat bread that is quicker to make than yeast-bread.

Bakery Industry

Baked goods have been around for thousands of years. The art of baking was developed early during the Roman Empire. It was a highly famous art as Roman citizens loved baked goods and demanded for them frequently for important occasions such as feasts and weddings etc. Due to the fame and desire that the art of baking received, around 300 BC, baking was introduced as an occupation and respectable profession for Romans. The bakers began to prepare bread at home in an oven, using mills to grind grain into the flour for their breads. The oncoming demand for baked goods vigorously continued and the first bakers’ guild was established in 168 BC in Rome. This drastic appeal for baked goods promoted baking all throughout Europe and expanded into the eastern parts of Asia. Bakers started baking breads and goods at home and selling them out on the streets.

This trend became common and soon, baked products were getting sold in streets of Rome, Germany, London and many more. This resulted in a system of delivering the goods to households, as the demand for baked breads and goods significantly increased. This provoked the bakers to establish a place where people could purchase baked goods for themselves. Therefore, in Paris, the first open-air bakery of baked goods was developed and since then, bakeries became a common place to purchase delicious goods and get together around the world. By the colonial era, bakeries were commonly viewed as places to gather and socialize.^[2] World War II directly affected bread industries in the UK. Baking schools closed during this time so when the war did eventually end there was an absence of skilled bakers. This resulted in new methods being developed to satisfy the world’s desire for bread. Methods like: adding chemicals to dough, premixes and specialized machinery. Unfortunately these old methods of baking were almost completely eradicated when these new methods were introduced and became industrialized. The old methods were seen as unnecessary and financially unsound, during this period there were not many traditional bakeries left.

Bakery is a traditional activity and occupies an important place in food processing industry. The bakery manufacturers in India can be differentiated into the three broad segments of bread, biscuits and cake. About 1.3 million tonnes of the bakery products industry in India is in the organized sector out of 3 millions tonnes, while the balance comprises of unorganized, small-scale local manufacturers. Though, there are sufficient automatic and semi-automatic bread as well as biscuit manufacturing units in India but there are still number of people prefer fresh bread and other products from the local bakery. After entry of Pizza and Burgers’ MNCs in the country, people are changing their tastes also. Today, they are not restricted to bread, cake and biscuits but to other bakery products also. The consumers are increasingly going for newer options with respect to bakery products. With the ventures of few Companies like Britannia, Biskfarm, and Morish etc. competition has increased. Also, the Indian market is witnessing the proliferation of bakery cafe chains in the form of Baristacafe, coffee day, Café Coffee & Monginis etc.

Armed with better technology, know-how and novel ideas, these foreign companies have made rapid inroads into the lucrative market within a very short span of time. Though the demand for bakery products in India has always been on the rise, there is clearly a lack of awareness and the will to break new ground, which has helped global players to gain brownie points while exploring the market in India. The unorganized sector accounts for about half of the total biscuit production estimated at 1.5 million tonnes. It also accounts for 85 per cent of the total bread production and around 90 per cent of the other bakery products estimated at 0.6 million tonnes. The last includes pastries, cakes, buns, rusks and others.

Since the wide introduction of organochlorines and other synthetics in early 50’s farmers have heavily relied on the chemical pesticides for pest control. Over emphasis on chemical control has caused serious imbalances in the agro-ecosystem. The enormous quantities of chemicals, poisonous to microbial life, that fall on earth gets mixed up well with soil. Some problems like non-target effects of chemicals as well as latrogenic diseases are being experienced. Coupled with these, the increasing awareness of impeding pollution, health hazards and development of resistance have intensified the search for alternative strategies.

In the present investigation, the attempts have been made to test the stability and pest management efficacy of the plant extracts of some Indian medicinal plants, namely, Datura stramonium, Ricinus communis, Vitex trifolia and Nerium indicum. In the earlier chapters detailed methodologies and the results have been elaborated. This chapter embodes the comprehensive inter- and intra-comparative results and discussion on the basis of selected plants, extraction media, pest species and bioassay followed by conclusions.

The hot sterilized water extracts of R. communis were found to be more stable (i.e. 20 days to start the fermentation). In overall study the plant extracts were stable or viable means active for three to four weeks only. In most cases, the activity of cold and hot water extracts was found to be increasing with fermentation however the decrease in the activity of some extract was also observed.

The highest mean anti-fungal activity was reported for R. communis extracts followed by D. stramonium and N. indicum aqueous extracts, whereas no any anti-fungal potency was reflected by V. trifolia against test fungi species. R. communis and N. indicum extracts, the cold water method extraction showed greater positive effects in terms of mean anti-fungal potency as compared to the hot water extracts. The water extraction of D. stramonium was found to be more effective in anti-fungal activity study.

Introduction

The food problem in the world is expected to become more serious if the world population keeps growing at the present rate. Out of various strategies to solve the problem, the post-harvest handling of the grains is of paramount importance. Tribolium species is major pest of stored grain and grain products in the tropics. Control of this insect relies heavily on the use of synthetic insecticides, which has led to many problems such as increasing costs of application, pest resurgence, pest resistance to pesticides and lethal effects on non-target organisms in addition to direct toxicity to users and disturbances of the environment. Thus, insecticides of natural origin are rational alternatives of synthetic insecticides. Several botanicals, natural products and their derivatives have been reported and exhibit better efficacy and potency against the stored grain pests.

In the present investigation, an attempt has also made to test ovicidal, larvicidal and adult emergence suppression potentials of the extracts of some of the locally available Indian medicinal plant viz., Datura stramonium, Ricinus communis, Vitex trifolia and Nerium indicum against T. castaneum against T. castaneum, commonly called as Red flour beetle.

Introduction

There are a number of estimates of post-harvest losses. The most conservative estimates for the handling losses at about 10 per cent, a quantity good enough to feed at least 60 million people. Storage loss occurs due to quantitative and qualitative damages caused by insects, mites, fungi, rodents, birds, heat, moisture, etc. Several hundred insect species have been reported to be associated with stored grains and milled and processed foods, but some 50 of these species are considered injurious. Under Indian conditions, the most important insect pests of stored grains are Sitophilus oryzae (Rice weevil), Tribolium castaneum (Red flour beetle), Rhizopertha dominica (Lesser grain borer), Callasobruchus spp. (Pulse beetle), etc.

The use of repellents to ward off insects has been a very old practice of mankind. The simple fly swatters, feather dusters, hand fans, mosquito nets etc., are some of the physical repellants still in use. In our own country, mustard oil or turmeric (haldi) water is also used as a mosquito repellent. Fire and smoke are the two oldest insect repellents known to man. To get rid of wasp nests from our dwelling or ward off honeybees during honey extraction, smoke is normally employed. Similarly sandal dhoop is often burnt to purify air (i. e. to ward off insects) in our houses.

Chemicals that prevent insect damage to plants or animals by rendering them unattractive or offensive are called repellents. A more broad-based definition would be: non-poisonous or mildly poisonous chemicals that induce avoiding (oriented movements in insects away from their source. Repellents are more important in the protection of man and his animals from insect attacks than in the protection plants.

Introduction

The biological systems on the earth are in a dynamic equilibrium. In this attempt to live comfortably man disturbs this equilibrium in many, one of which is the cultivation of crop plants to meet his requirements for food, clothing and shelter. Intensive and extensive n of crop plants provides not only better crops but also better ties for pests and diseases to attack these crops. The greater loss due to the pests and diseases, the greater the attempt to these damages. Bacteria are one of the important disease since time immemorial. Bacteria are found in every ble habitat. They are unicellular, but display a variety of ‘cal forms.

The present investigation on the botanicals  has been aimed at preparation of different types of aqueous extracts of locally available medicinal plants viz., Datura stramonium (Datura), Ricinus Castor), Vitex trifolia (Nirgudi) and Nerium indicum (Kanher); the study concentration and stability of these extracts at room temperature; and evaluation of their anti-bacterial activities. This study will be helpful to preserve and increase the pest management potency and efficiency of plant derived products.

Introduction

In man’s continued effort to enhance food production, new high yielding crop varieties and new techniques for crop and field management are being constantly evolved resulting in a parallel increase in disease occurrence which calls for their efficient management. Of the various management strategies available for disease management, the chemical strategies have so far dominated our thinking. Over emphasis on chemical control of plant diseases has caused serious imbalances in the agro-ecosystem^1-2.

The shift to exploration of non-chemical strategies is likely to correct the imbalance in our approach and subsequently improve the understanding of Integrated Disease Management (IDM). IDM is defined as ‘a disease management system that utilizes all suitable techniques in a compatible manner to reduce and maintain pest pathogen population at levels below those causing economic injury.’ Fungi are the important group of pathogens.

In continuation of our work on natural pest management agents the present investigation aims at the preparation of different types of aqueous extracts of locally available four Indian medicinal plants viz., Datura stramonium Linn (Datura), Ricinus communis Linn. (Castor), Vitex trifolia Linn. (Nirgudi) and Nerium indicum Mill. (Kanher); study of stability of these extracts at room temperature; and evaluation of their anti-fungal potencies. This study will help to preserve and increase the pest management potency and efficacy of natural products.

Introduction

In agriculture and public health sectors, a variety of pesticides are still in uses that are toxic chemicals and having broad-spectrum actions. They kill target species but also harm the ecosystem seriously by affecting desirable organisms, thus, badly impairing prey-predator relationship. Most of these pesticides are persistent or non-biodegradable and hence exhibit biological magnification by accumulating at higher concentration in the organism, which are on the top of the food chain. The other drawbacks of repeated use of pesticides are eradication of natural enemies of pests, increased level of pesticide residues in soil, water, food and fodder crops, resistance of pests to pesticides and resurgence of minor pests in addition to the environmental pollution. It is clear that once used pesticide may persist, somewhere causing serious harm to the mankind and his ecosystem.

The increasing incidence of pesticide harms is fueling the need for new pesticides, which are toxicologically safe, more selective and efficacious and environment-friendly. Now the natural compounds, thus, have increasingly become the focus of those interested in discovery of pesticides. Tens of thousands of secondary products of plants have been identified and there are estimates that hundreds of thousands of these compounds exist. There is growing evidence that most of these compounds are involved in the interaction of plants with other species-primarily the defense of the plants from plant pests. Thus, these secondary compounds represent a large reservoir of chemical structures with biological activity. This resource is largely untapped for use as pest management agents^3, 4. The extraction of such chemicals from plants and derivatives of potent compounds are being encouraged all over the world under the Integrated Pest Management (IPM) approaches. The natural compounds and their synthetic derivatives are more selective in action, completely biodegradable and environment-friendly. In short, natural ways of pests control have already been established and are receiving much attention these days.

India is an agricultural country and nearly 70% of its population is dependent directly or indirectly on agriculture and related activities. At present, about 173 million hectares of land is under agriculture of which about 143 million hectare are cultivated without fallow. Mounting pressures of teeming population and shrinking land (due to urbanization) have necessitated the production of increasingly more food per unit area. In the efforts to increase the food production and make the country self-sufficient in food grains, modern technology adopted since ‘Green Revolution’ in the middle sixties has paid a significant role. Higher yields in almost all crops were possible with exotic and high yielding genotypes and availability of seeds, heavy doses of fertilizers, frequent irrigation, labour and repeated applications of pesticides. However, several genotypes particularly hybrids proved to be susceptible to pests and disease pathogens. Insect-pests, diseases and weeds are important biotic-constraints inflicting 20-25% losses in agricultural production. Farmers were therefore compelled to use pesticides extensively and frequently.

Plant protection is an integral part of the crop production and pesticides proved to be valuable means in plant protection to ensure plenty food. However, some of the pesticides are highly hazardous and their residue remains undetected and posses risk to human safety and health. Moreover, the repeated and incorrect applications without following need-based criteria have resulted in several secondary side effects ². For instance, increased resistance of pests to insecticides, harmful to beneficial and non-target insects and animals, undesirable effects on crop plants and environmental hazards. Safety has become a major worry in factories and outside the working places. Besides these, repeated and heavy pesticide applications add to the cost of production and misery to farmer. These ill effects of synthetic pesticides have aroused interest in alternate methods of plant protection.