eChapters

Floriculture is a high value industry. It is increasingly regarded as a feasible diversification option from traditional field crops due to increased per unit returns and increasing habit of ‘Greeting with Flowers’ during all the occasions. With increasing awareness among consumers and pressure from the artificial floral products on the fresh flower industry, and continued competition even amongst the growers, whole salers and retailers, quality is becoming increasi ngly important. The aspects related to visual quality of the product are the main determining indices of consumer’s acceptability of flowers.

The important flower crops in the international market are rose, carnation, lisianthus, chrysanthemum, gerbera, hydrangea, gladiolus, gypsophila, bird of paradise, orchids, anthurium, tulip and lilies etc. Cut flowers have the highest economic value and are the most perishable. Their high respiration rates, rapid deterioration, and susceptibility to damage require the utmost care during postharvest handling for quality maintenance. The post-harvest losses can be both, quantitative as well as qualitative, which ultimately result in loss in terms of its monetary value.

Floriculture industry is facing main problem due to highly perishable nature of its flowers which demand for appropriate post-harvest handling techniques to maintain the quality. With changing scenario in international floriculture trade, perfection in post-harvest technology is mandatory to offer quality plant products to the consumers round the year. The post-harvest life of cut flowers and flowering pot plants can be extended relatively by a range of treatments and technologies. Quality factors that influence the post- harvest keeping quality and flower longevity are environmental factors as well as the influence of the pathogenic organisms. Due to perishable nature of cut flowers, huge post-harvest loss is there which ranges from 30-50 per cent. Qualitative losses which include consumer acceptability of fresh produce are much more difficult to measure than quantitative losses. Quantitative losses can occur during the entire post-harvest and marketing chain due to lack of proper post harvest handling (Bhattacharjee, 2006). These losses could be on a higher side, which might be due to lack of knowledge on ‘post-harvest handling’ of cut flowers and proper infrastructure for post-harvest management and storage. However, all these losses can only be minimized by proper technique of harvesting, post-harvest handling, packaging, storage, marketing and value addition of flowers.

Flowers and various parts of the plant have been used for decoration and to commemorate various religious, festive, matrimonial and social gathering events in day to day life. The main drawback of fresh flowers and foliage is being highly perishable and delicate which cannot retain their beauty for longer durations. Moreover fresh flowers are not available round the year which can be overcome by the dehydration and drying techniques. Since ancient times, in Egyptian pyramids, fragrant dried flowers and herb garlands were encased along with mummified bodies. Japanese people created “Oshibana”, the “preserved flower art” of enduring designs to retain the exquisite beauty of the living plants centuries ago.

Later on, this craft making technique spread from Japanese to Victorian England because of their beautiful long lasting appearance. During middle ages monks dried flowers, foliage, and herbs for use in decorative motifs or for colouring their handprinted books.

Dried flower arrangements have been popular in Europe for centuries, and as early as 1700 AD, colonial Americans used dried flowers to brighten their homes, especially during the dark winter months.

Earlier botanists practiced dried flowers in the form of herbarium for the purpose of identification of various plant species. Though drying of flower was well known even in the past but for the first time the flowers were dried commercially in Germany (Sankari and Anand, 2014).

Floriculture has flourished with a considerable growth and a useful crop diversification option, particularly for small farmers over the past three decades. The commercial production of the cut greens has started in India in recent years and has huge demand in the market. They are suited for year round production with low investment and less care and maintenance. Cut greens or fillers are an important component of the floricultural industry and their commercial value depends on vegetative characters, such as stem length, leaf colour, density and side branching. Cut foliages (leaves and stems), which are attractive in form, colour and freshness, are lasting and in great demand. They have various other uses in making attractive fresh floral designs and floral arrangements, such as bouquets, wreaths, decoration of house interiors, etc. Evergreen plants with green, silver or variegated leaves are usually used and species with berries are now also becoming popular. Fillers are critical components in most arrangements as the flowers themselves,used to increase the volume and size of the bunch and provide colour contrast. These floral produce have various other uses in making attractive fresh floral designs and floral arrangements, such as bouquets, wreaths, decoration of house interiors, etc. Colour, freshness, stem length, freedom from pests, fragrance and vase life are important quality aspects of fillers. In the International market, fillers accounts for about 16 percent of the total trade by volume with an annual turnover of more than Rs 800 crores including selling of ornamental leaves, filler flowers, dry and dyed flowers along with berries and capsules. On the contrary, fillers representvery less quantum with poor quality in the domestic market and are unsuitable for cut flower bouquets. Their share in the market is very low and fetches nominal rates.

Flower arrangement is the art of using plant materials and flowers to create an eyecatching and balanced composition or display. Among all art forms, flower arrangements today take as prominent a place. The art engages ones personal involvement in welcoming guests and bringing cheer to the surroundings. It is rightly said, “Flowers are the music of the ground. From earth’s lips spoken without sound. “Professionally designed floral designs, arrangements or artwork incorporate the elements of floral design: line, form, space, texture, and color, and the principles of floral design: balance, proportion, rhythm, contrast, harmony, and unity.

Composition of Arrangements

There are a few compositions of flower arranging that should be considered. Once we understand these we can create so many different styles and our floral designs will have that professional look.

All higher plants have some kinds of aroma or flavor in their various parts, which includes roots, stems, leaves, flowers and fruits. This flavor and aroma in a particular plant part due to the presence of some specific essential oils present in special glands in it (Chadha and Choudhury, 1989). Essential oils arethe concentrated liquid, which is highly concentrated and water insoluble liquid (hydrophobic) and it is also known as ethereal or volatile oils, which are fragrant oily liquid that are extracted from the various parts of the plants. Generally they are organic compounds like hydrocarbons likealcohols, aldehydes, esters, ketones and phenols. An essential oil is “essential” in case that it contains the essence of the different fragrance, and the properties of the plants from which they are derived. All though all ornamental plants have some aroma but only few of them are used commercially in perfumes, flavor and cosmetic industries. The essential oil demand by fragrance industry is 60%, flavour industry 20% and pharmaceutical industry 20%. In all the perfumes, rose oil is one of the best and costliest perfume. The first recorded reference of rose perfume is in CharakSanghita. The credit for discovery of rose perfume was given to Queen Noor Jehan mentioned in the book written by Md. Achem of King Jahangir’s regime.

The volatile oils showed the different kinds of biological activities including the antibacterial, antioxidant, antiviral, insecticidal, etc. These oils are also used for cancer treatment, while some other has been used for the food preservations, aromatherapy, and in the perfumery industries. Thus, in the day to day life a large spectrum of usage the essential oil and aroma industry has a bright future. Yet the known applications of essential oilsare opening up ofmore areas which will benefit the industry.

Defining-Commercial Plant Breeding

The term commercial plant breeding originates by putting prefix ‘commercial’ before ‘plant breeding’ and is used as an adjective to plant breeding which surely is a noun. Naturally, commercial plant breeding remains largely plant breeding with slight twist that commercial plant breeding aims at delivering commercial products to be delivered to the end users that is the farmers as per the need of the consumers/markets. Thus, the farmers plant those products (open-pollinated cultivars and hybrids) which are easily accepted by the consumers and which are easy to be handled by the traders as the products reach to the traders and then from traders to the retailers and ultimately to the consumers. Along with consumers’ acceptance, these kinds of products must meet certain level of yield, maturity and resistance/tolerance to diseases and pests. Accordingly, these are designed and bred by the commercial seed companies which operate as per demand of the markets. Private seed companies operate on a business model and generate their own revenue to keep the companies running and therefore these seed companies are bound to design and breed commercially viable products. Thus, all plant breeding activities which occur at the research farm and laboratory of private seed companies aimed at designing and delivering commercially viable products are called as commercial plant breeding activities. While designing such project and running the plant breeding activities at the research farm and laboratories of the private seed companies, the emphasis has to be on ‘how to do’ and ‘how quickly to do’ rather than ‘why to do’. ‘Why to do’ issue is not totally ignored and this gets due consideration while formulating the research project based on extensive deliberations between various departments, namely, R&D, Sales and Marketing, Product Development, and Seed Production.

The term commercial plant breeding is generally not in use in public sector research institutes and the agricultural universities and certainly not in class room teachings and discussions while teaching courses on plant breeding and related courses under the domain of plant breeding. There the focus is on theory in contrast to applications which form the backbone of commercial plant breeding as practiced by the commercial organizations such as private sector seed companies which have to earn revenue by selling the products to meet the operational expenditure of running the companies and also to earn profit to run the activities of the company on long term basis in a sustainable manner and to invest in R&D. Therefore, a working definition of commercial plant breeding could be as follows.

The general recommendation for intake of fruits and vegetables is at least 400 g per person as recommended by World Health Organization (WHO), five servings of 80 g per day or about 146 kg per person per annum. For vegetables, the recommended intake requirement is at least 300 g per day per individual. This 300 g requirement must include 50 g leafy vegetables, 50 g roots and tubers and 200 g other vegetables (Kapur, 2016). Current annual vegetable production including potato, based on recent three years (2015-16, 2016-17, 2017-18) average is around 177 million tons from 10 million ha giving a productivity of 17.7 ton/ha. With this average and stagnating production and assuming Indian population at 133 CR (1.33 billion) and 25% postharvest losses, per capita per day availability of vegetables comes to 273 g leaving a gap of 27 g between the recommended dose and the availability of vegetables per head per day in India. By 2050, the projected population of India is 1.5 billion and to meet the requirement of this population, vegetable production will have be 220 million tons, of course making allowance of 25% post-harvest losses. Considering all kind of constraints on the available land area of vegetables, the vegetable area will be around 10 million ha and consequently, major gain of production will have to come from productivity increase from current level of about 18 tons/ha to 22 tons/ha and this seems to be a gigantic task as during last several years, the productivity of vegetables in India has been between 17 and 18 tons/ha, an indication that it has reached to a plateau. This situation calls for fall massive interventions on technological fronts in terms of innovative products with focus on better hybrids with higher yields, and resistance to biotic and abiotic stresses deploying precision breeding technologies using more of marker assisted breeding, genomics and gene editing tools and delivering high quality seeds to the farmers with assurance of high performance. This chapter looks into the present seed scenario and the emerging trends with respect to new seeds and new technologies and examines the need to facilitate rules, regulations and IPR environment for more investment in vegetable research and development and quality seed production and distribution. Improved seed with shift towards hybrid seed will be the key driver to increase vegetable production and productivity in India.

Genotype × environment interaction underlies the efforts of crop ecologists, agronomists, and plant breeders to define ecological regions, mega-environments, and ecotypes and to specify the adaptation and yield stability of individual cultivars. Multi-location testing or multiple year testing gives rise to an important term, genotype x environment interaction. “Interaction” is a statistical term signifying differential response of genotypes over the environments. The environments could be in terms of more numbers of diverse locations or years. Multi-location trials (MLTs) are also called as multiple environment trials (METs) and these have been adequately reviewed by Yan and Hunt (1998) and Kang et al. (2004). The following sections of this chapter derive extensive information on MLT/MET from these two sources.

Introduction

The genotype-environment-interaction (GEI) is a complex phenomenon that undermines the repeatability of experimental results and consequently reduces the selection efficiency. Agricultural researchers have long been concerned of the various implications of GEI in plant breeding programmes. Understanding of the implications of GEI structure/nature is important in crop breeding programmes as a significant GEI can seriously impair selection of superior genotypes in new crop introduction and cultivar/hybrid development programmes. Crop breeders of field and vegetable crops, etc. are in better position to decide whether crop cultivars should be developed for all the environments of interest or if the breeders should develop specific cultivars for specific target/mega environments. Variation among genotypes in phenotypic sensitivity to the environment may require the development of locally adapted varieties.

Genotype-by-environment is widely observed and reported issue. Large numbers of publications both on GEI and stability parameters are pointers to the facts that it is a complex and intriguing issue and these are expected to be more relevant in the light of the fact that greater emphasis is going to be placed on sustainability of agricultural systems.

Genetic purity (GP) is a crucial seed quality factor. Several steps and precautions are involved in achieving the desired levels of genetic purity in the seed. Right from the choice of genetically pure seed for seed production up to final packing of the seed produced, at any stage, genetic purity can get affected. Field inspection and postharvest checks help in verifying conformity to seed quality standards especially genetic purity. Wherever seed characteristics are clear, examination of samples in the quality assurance laboratory for other distinguishable varieties (ODV) gives an idea of the genetic purity status. Among the several methods available for GP assessment, Grow Out Test is one.

In this context, some basic principles and procedures and guidelines relating to GOT are presented with more of information in tabular forms. In brief, the aspects covered include objectives, principles, kinds of GOT, genetic purity standards, procedure, main factors for observations, evaluation, and recording and reporting. Table 4.1 gives the submitted sample size for GOT; and Table 4.2 shows the minimum number of days required for evaluation from sowing and Table 4.3 deals with maximum weight of submitted sample and minimum weight of working sample for GPM, GOT and ODV.

Supply chain management or inventory management is an important and integral component of commercial breeding activities practiced by the private seed companies whose over all research efforts in terms of developing and commercially releasing high performing cultivars and hybrids get defeated unless the product reaches to the end users that is the farmers. Seed supply chain management is the lifeline of any seed business especially when the seed business is under private sector seed companies whose delivery is very strong. Supply chain management refers to the process of ordering, storing, and using a company’s inventory. These include the management of raw materials, components, and finished products, as well as warehousing and processing such items and ultimately delivering virtually to the door steps of the farmers through a strong network of dealers/distributors/retailers. For companies with complex supply chains and manufacturing processes, balancing the risks of inventory gluts and shortages is especially difficult and challenging.

The process of supply chain management is a continuously evolving process, ready to deal with the unforeseen situations like the situation created by COVID-19 pandemic forcing countries after countries going for lockdown and bringing the entire business operations including material and men transport to a grinding halt. However, even under these extremely challenging situations, governments fully know that agricultural activities cannot be fully stopped to avoid resurgence of hunger and malnutrition. However, despite the window allowed by the government for running the supply of essential goods including agricultural inputs like seed, agrochemicals and farm machines, manufacturing the agro-inputs including seeds and their distribution to the endpoints has become extremely difficult. A few companies have devised new processes to run seed supply using completely new and innovative approaches, for example, In Bayer’s first-ever e-commerce collaboration in India, the company has tied up with Agro-Star, a Pune-based e-commerce firm in the agricultural segment. Under the partnership, farmers can order Bayer’s seeds and crop protection products for their entire crop lifecycle and receive agronomic advisory through Agro-Stars digital agri-tech platform. Home delivery of agri-inputs can currently be availed by farmers in North, West and Central India, with plans to extend the scope to other geographies in the future. In the current COVID-19 lockdown situation, the partnership has enabled last mile delivery of products for multiple crops directly to farmer’s doorsteps.

The International movement of seed takes place for (i) germplasm for R&D purposes, (ii) experimental lines and hybrids for screening purposes, (iii) basic seed for multiplication purposes, and (iv) commercial varieties and hybrids for marketing (Ranganathan, 2019). Vegetable seed import and export for research purposes is handled by National Bureau of Plant Genetic Resources (NBPGR), New Delhi where the importing research organization in India first gets an import permit from NBPGR following due procedures as available on NBPGR website (www.nbpgr.ernet.in). Once the importing research organization, like ICAR institutes, state agricultural universities, private seed companies, etc get the import permit which specifies the list of material to be imported and the seed source, the import permit is sent to the research seed supplying agency who in turn attaches a phytosanitary certificate along with the copy of the import permit to the consignment and sends the same to NBPGR. NBPGR retains part of seed and releases the seed to the indenter after necessary quarantine test and charging quarantine fee. The importing organization is expected to give a brief report about the material to the NBPGR after its evaluation at its farm/lab.

The bulk seed import (vegetable seed for commercial purposes) is handled by Directorate of Plant Protection, Quarantine and Storage, Faridabad, Haryana (www.ppqs.gov.in) with no condition of testing by government system. This exemption of testing is not available for field crop seed. It needs to be clarified that the bulk vegetable seed import has been simplified as per New Seed Policy-1988 which has put the vegetable seeds among others under OGL (open general license) and this provision facilitates the vegetable seed in bulk and the private seed companies have taken advantage of this provision. The Indian private seed companies are importing large quantities of seed of cauliflower, cabbage, broccoli, radish, carrot, beet root and even vegetable peas. The bulk vegetable seed import for commercial purposes is done as per following procedure.

Varietal release and notification comes under the purview of the Seeds Act which is intended to provide for regulating the quality of certain notified seeds for sale and for marketing and for the matters connected therewith. Released and notified varieties are offered for seed certification by the seed certification agencies which ensure that the varieties under certification meet certain prescribed field and seed standards failing which they stand to be rejected during the process of seed certification. This ensures seed quality and its availability to the farmers.

Purpose of Release

The purpose of Release of cultivars is to introduce the newly evolved varieties to the public and the farmers in particular for general cultivation in the region for which the variety is released and notified ensuring availability of seed of varieties according to their suitability and adaptation and avoiding mismatch. In other words, release of a cultivar is in the nature of a recommendation to the farmers for its adoption. Therefore, notification of a variety is linked to the release of a variety, though the release process itself does not have statutory cover.

The Seed Act 1966 was passed by the Indian Parliament on 29th December 1966 and it came into force from 2^nd October, 1969. In addition, Seed Regulation Order was also passed in December 1983. The sole objective of Seed Act and Order has been to ensure that the Indian farmers get good quality seeds of important crops. Important provisions and guidelines for the farmers are given below:

The Act is applicable for the seeds notified by the Central Government from time to time.

Seed quality is regulated at two stages viz. seed production and seed certification. For this purpose, seed testing laboratories and seed certification agencies are to be established in each state. Maharashtra has been the first state to implement this act. Now all the states have implemented this act.

New Seed Policy

Ministry of Agriculture, vide Letter No.11-71/88-SD-1 dated September 16,1988, has brought out ‘New Policy on Seed Development’, with the aim of providing to the farmers the best planting materials available in the world so as to increase productivity and thereby increasing farm income and export earnings. The Policy covers the import of seeds of coarse cereals/pulses/oil seeds; vegetable and flower seeds; bulbs/tubers of flowers; cuttings/ saplings/bud/wood etc., of flowers; and seeds & planting material of fruits. The following are the guidelines for the import of above categories of seed/planting material under the Seed Policy

Import of Seeds of Coarse Cereals/Pulses/Oil Seeds

The import of seeds of coarse cereals/pulses/oil seeds is permitted for a period not exceeding two years by companies that have technical/financial collaboration with companies abroad, provided that the latter agree to supply parental lines/nucleus or breeder seed technology to the Indian firm within two years of first shipment of commercial consignment. The bulk import is permitted by the importer based on the recommendation issued by the Department of Agriculture & Cooperation (DAC) after considering the trial/evaluation report of the varieties/hybrids, which he intends to import. PPA or any other officer notified for the said purpose issues the import permit based on the recommendation of DAC. However the recommendation of DAC is not required for import of trial material. The quantities of the seed permitted for import for initial trials by the importer, for ICAR multi-location trials & agronomic trials or combined trials (vide Letter No. 11-71/88/S.D.I dated 30^th January 1989 issued by the Ministry of Agriculture) as per Para 4.3.5 of Seed Policy shall be in accordance with Schedule-XII and also the quantities of seeds of parental lines required to be sampled and submitted in sealed condition for accession to gene bank of National Bureau of Plant Genetic Resources (NBPGR), New Delhi (vide Letter No. 11-102/88-S.D.I dated 5^th February 1991) as per Para 4.3.8 of Seed Policy. The imported consignment shall be subjected to detailed testing for a period of 30-35 days and the same purpose the consignment will be held under detention in AAI warehouse or any customs bonded warehouse at the cost of importer.

Protection of Plant Varieties and Farmers’ Rights Act-2001 (PPVFRA-2001) was enacted by government of India in 2001 to create a sui generis system of providing a legal framework as an IPR mechanism to protect the varieties of crop plants in India along with grant of breeders’ and farmers’ rights in the interest of all the stakeholders and also to comply with WTO guidelines to which India is a legal signatory. The salient features of this act are as follows.

The Protection of Plant Varieties and Farmers’ Rights Act-2001, Act no. 53 of 2001, (30th october, 2001)

This act is in place to provide for the establishment of an effective system for protection of plant varieties, the rights of farmers and plant breeders and to encourage the development of new varieties of plants. It recognizes and protects the rights of the farmers in respect of their contribution made at any time in conserving; improving and making available plant genetic resources for the development of new plant varieties; it encourages accelerated agricultural development in the country; it protects plant breeders’ rights to stimulate investment for research and development, both in the public and private sector, for the development of new plant varieties; it facilitates the growth of the seed industry in the country which will ensure the availability of high quality seeds and planting material to the farmers. To give effect to the aforesaid objectives, it is necessary to undertake measures for the protection of the rights of farmers and plant breeders; as India, has ratified the Agreement on Trade Related Aspects of Intellectual Property Rights should, inter alia, make provision for giving effect to sub-paragraph (b) of paragraph 3 of article 27 in Part II of the said Agreement relating to protection of plant varieties. Accordingly, this act is in place.

The increasing concerns about dwindling biological resources globally led to the Convention on Biological Diversity in 1992. This convention for the first time, recognized sovereign rights of States over their biological resources and emphasized that access to genetic resources should be only for environmentally sound purposes and should be subject to national legislations. The access has to be on mutually agreed terms which inter-alia would include recognition of associated Traditional Knowledge of indigenous communities and equitable benefit sharing arrangements.

Taking cognizance of the provisions of the CBD, and to deal with extensive pressure on our biological resources, India has enacted an umbrella legislation called Biological Diversity Act-2002 (No. 18 of 2003), and also notified the Biological Diversity Rules-2004 for guidance and compliance by various stakeholders, including the Union and State Governments, Non-state sectors, and individuals. The Act aims at conservation of biological resources as well as facilitating access to them in a sustainable manner and through a just process. The salient features of this act are as follows (NBA, 2004).

In order to provide for the establishment of an effective system for protection of plant varieties, the rights of farmers and plant breeders and to encourage the development of new varieties of plants it has been considered necessary to recognize and protect the rights of the farmers in respect of their contribution made at any time in conserving, improving and making available plant genetic resources for the development of the new plant varieties. Moreover to accelerate agricultural development, it is necessary to protect plants breeders’ rights to stimulate investment for research and development for the development of new plant varieties.

Such protection is likely to facilitate the growth of the seed industry which will ensure the availability of high quality seeds and planting material to the farmers. India having ratified the Agreement on Trade Related Aspects of the Intellectual Property Rights has to make provision for giving effect to Agreement. To give effect to the aforesaid objectives the Protection of Plant Varieties and Farmers’ Rights Act, 2001 has been enacted in India

All India Coordinated Research Project (AICRP) on vegetable crops (VC) was started during the IV five-year plan in 1970-71, to provide a national grid for multi-location testing of the vegetable technologies developed by various research institutes and state agricultural universities. The headquarter of the project was at the Division of Vegetable Crops, Indian Agricultural Research Institute (IARI), New Delhi and the first Project Coordinator (Vegetable Crops) joined the project in July 1971. During 1986, level of the project was elevated to the Project Directorate. Further, in a significant development during 1992, headquarter of the directorate was shifted from IARI, New Delhi to the present day Indian Institute of Vegetable Research (IIVR) at Varanasi. In a significant development, in eleventh five-year plan the National Seed Project (Vegetables) was merged with AICRP (VC).

Presently the AICRP Vegetable Crops is a network of 36 regular and 18 voluntary centres. The network is headed by the Project Coordinator and it’s headquarter functions from IIVR (Indian Institute of Vegetable Research), Varanasi, main campus. The AICRP centers are located in different agro-climatic zones of the country. The centers in the network include ICAR institutes, central institutes, state agricultural and traditional universities and a few other public and private research organizations.

The World Vegetable Center (previously called as Asian Vegetable Research and Development Centre, AVRDC) with headquarter at Shanhua, Taiwan conducts research, builds networks, and carries out training and promotion activities to raise awareness of the role of vegetables for improved health and global poverty alleviation. Vegetables can alleviate poverty by creating new jobs and new sources of income for farmers and landless laborers, improve health by providing essential micronutrients lacking in diets, enhance learning and working capacities of adults and children through improved diets and health, and improve the sustainability of food production practices by diversifying cropping systems. The Center’s research and development work focuses on breeding improved vegetable lines, developing and promoting safe production practices, reducing postharvest losses, and improving the nutritional value of vegetables (https://avrdc.org). The centre’s mission is Research and Development to realize the potential of vegetables for healthier lives and more resilient livelihoods

Tomato (Lycopersicum esculentum Miller, 2n = 2x = 24, also known as Solanum lycopersicum, Family Solanaceae) has been the leading vegetable crop globally. Tomato genome is composed of approximately 950 Mb of DNA, more than 75% of which is heterochromatin and largely devoid of genes. The global production of tomato in 2017 has been 182 million tons from 5 million ha area giving a productivity of 36.4 tons/ha. Top 10 countries in tomato production in descending order are China, India, Turkey, USA, Egypt, Iran, Italy, Spain, Mexico and Brazil. Tomato is planted almost throughout the year in different parts of India in an area of 8 lakh ha (0. 8 million ha) with production of 20.8 million tons giving a productivity of 26 ton/ha. Tomato area in India is almost 10% of total vegetable area. The states accounting for major tomato production in India are Andhra Pradesh, Orissa, Telangana, Madhya Pradesh, Karnataka, Maharashtra, West Bengal, Chhattisgarh, Bihar, Gujarat, and Himachal Pradesh.

Out of total area, about 78% is planted with F₁ hybrid seed while remaining 22% of the area still goes to open-pollinated varieties. The average productivity of tomato close to 26 tons/ha is still very low compared with the global productivity of 36.4 tons/ha. However, with the introduction of high performing and disease resistant hybrids, the productivity and production are continuously improving. Most of hybrid tomato seed (95 tons) is sold by the private seed companies. There are more than 375 tomato hybrids in the commercial chain in India produced and marketed by different companies. About 50 hybrids out of these 375 hybrids are being grown on more than 80% of the area under tomato in India. Leading companies in tomato hybrid seed segment are Seminis (Bayer), Syngenta, Rasi HyVeg, and Namdhari (NHB, 2015; Kapur, 2016).

Chilli (Capsicum annuum, 2n = 2x = 24, family Solanaceae) also known as hot-pepper, classified as often-cross-pollinated crop is consumed both as fresh green and dry spice type. It is a rich source of vitamin C and pungency to the consumers and world food industries. The global area and production statistics often run into different figures due to inclusion of some times only fresh green chilies, sometimes red-dry chillies and sometimes inclusion of sweet peppers also in this broad category. The global production of fresh and dry chillies in 2014 has been reported to be 32.32 million tons where China alone accounted for 16.12 million tons followed by India with over 5 million tons of production. Other major countries growing chilli are Mexico, Indonesia, Spain, Turkey, USA, Korea, Bangladesh, Pakistan, Nigeria, Thailand and Ethiopia. More than 65% of global green and dry chillies production is in Asia, while Europe contributes 12% and Africa around 10%. China is the leading producer of green and dry chillies, Area under chillies in China is less than that in India, but productivity is almost double than that in India.

Solanum melongena L. (2n = 2x = 24, family Solanaceae, often cross-pollinated) is known as eggplant in the United States and aubergine in France and England. It is one of the few cultivated solanaceous species originating from the Old World. It is known as brinjal in its home country, India, where it was domesticated long ago and where the greatest diversity exists. Widely grown in temperate and tropical Asian countries, eggplant has been also a common crop in the Middle East and around the Mediterranean basin and is now cultivated worldwide. Although an Old World taxon, S. melongena unexpectedly shares strong genetic similarities with New World Solanum species, namely, tomato and potato. These syntenic features have been discovered and will undoubtedly assist in an unlocking of the genes controlling eggplant key horticultural traits (Daunay, 2008).

As per FAOSTAT website-2018 quoted by Ministry of Agriculture and Farmers Welfare, Government of India, Horticulture Statistics Division (2018), the world production of eggplant was 51.29 million tons from 1.79 million ha with a productivity of 28.65 tons/ha during 2016. Top ten countries in eggplant production during this period were China, India, Egypt, Turkey, Spain, Iran, Indonesia, Italy, Japan, and Philippines. The bulk of eggplant production came from top ranking China (0.78 million ha area, 32.03 million tons production and 41.06 tons/ha productivity) followed by India (0.66 million ha area, 12.60 million tons production and 19.09 tons/ha productivity) occupying the second rank. Productivity-wise, Spain is top rank holder with productivity close to 65 tons. Leading brinjal producing states in India are West Bengal, Odisha, Gujarat, Bihar, Andhra Pradesh, Madhya Pradesh, Maharashtra, Chhattisgarh, Karnataka, Haryana, Jharkhand and Assam.

Okra or lady’s finger (Abelmoschus esculentus L. Moench, 2n = 2x = 130, family, Malvaceae) is classified as fruit vegetable like tomato, and eggplant and is grown in the tropical and sub-tropical regions of world. Okra growing major countries are India (occupying the first rank), Turkey, Iran, Iraq, Egypt, Saudi Arabia, Cameroon, Mexico, Lebanon, Israel, Jordan, Greece, Yugoslavia, Bangladesh, Afghanistan, Pakistan, Myanmar, Japan, Malaysia, Brazil, Nigeria, Ethiopia, Sudan, Ghana, Benin, Cyprus, and southern USA. Though, virtually it is not grown in Europe and north America, yet lot of people in these countries have started liking this common vegetable because of good amount of vitamin A and folic acid, besides, carbohydrates, phosphorous, magnesium, and potassium. In India, okra is extensively grown throughout the country but the states with substantial acreage under okra are Gujarat, Maharashtra, Andhra Pradesh, Telangana, Uttar Pradesh, Madhya Pradesh, West Bengal, Assam, Rajasthan, Tamil Nadu, Karnataka, Haryana and Punjab, both in rainy and spring-summer season. The global total area and production under okra is reported to be close to 1.15 million ha and 7.9 million tons giving a productivity of 6.8 tons/ha. India with approximately 0.5 million ha (5 lakh ha) area and production and productivity of an average of 6 million tons and 12 tons/ha, respectively accounts for close to 75% of share of world production of okra and hence has been accorded a prominent place in the list of crops under R&D by the private seed companies in India. In India, okra has huge export potential as fresh vegetable to the neighbouring countries in the Middle East, like, Bahrain, Qatar, Kuwait, Saudi Arabia, Muscat, Tehran, and Abu Dhabi and SouthEast Asia, particularly Singapore, Mauritius, Malaysia, Sri Lanka and Bangladesh. Therefore, any company with its own R&D in India treats okra a worthwhile crop to keep it under its portfolio and naturally okra becomes an important crop for commercial breeding. Unless a crop makes business sense on account of substantial acreage, production and seed sale volume, there will be no point in launching a full-fledged commercial breeding programme on that particular crop. Thus, okra qualifies a good candidate for commercial breeding in India.

Cabbage (Brassica oleracea, ssp. capitata, 2n = 2x = 18, family Brassicaceae = Cruciferae, cross-pollinated due to sporophytic incompatibility) comes under generic name cole crops. It is a rich source of calcium, and vitamins A and C. It is generally consumed as cooked vegetable, boiled or stewed, raw salad, soup and sauerkraut which is cabbage cut into fine slices that undergo lactic acid fermentation in a brine made of its own juice with salt. Sauerkraut was traditionally made at home in Germany and other European countries, but nowadays it is mainly an industrial product.

According to Indian Horticulture Database-2014 (NHB, 2015), global production of cabbage spread over more than 125 countries has been 70.64 million tons from 2.42 million ha area with a productivity of 29.2 tons/ha. Of this total global cabbage production, top ranking China (32.80 million tons from 0.98 million ha) and second ranking India (9.04 million tons from 0.40 million ha) jointly contributed about 59% of the production. Other countries in the descending order of the production were Russian Federation, Japan, South Korea, Ukraine, Indonesia, Poland, Romania and USA. In terms of productivity (tons/ha), South Korea (71.2 t/ha) and Japan (67.6 t/ha) were far ahead than the rest of the countries which were in the range of 20.1 to 42.9 tons/ha.

During 2017-18, also Indian cabbage production was 9.04 million tons from 0.40 million ha (4 lakh ha) area giving a productivity of 22.6 t/ha. Thus in India, cabbage area seems to be stabilized at 4 lakh ha. The top ten cabbage producing states in India are West Bengal, Bihar, Odisha, Assam, MP, Gujarat, Chhattisgarh, Jharkhand, Karnataka and UP (Horticulture Statistics at a Glance-2018, MAFW, 2018).

Cauliflower (Brassica oleracea var. botrytis, 2n = 2x = 18, Family Brassicaceae, cross-pollinated, sporophytic self-incompatibility) is traditional European crop that has become widespread in Asia. As per Horticulture Statistics at a Glance-2018, published by Ministry of Agriculture and Farmers Welfare, Government of India (MAFW, 2018), during 2016, global production of cauliflower and broccoli was 25.23 million tons from 1.34 million ha with a productivity of 18.82 tons/ha. Bulk of area and production (>70%) was accounted for by China, I rank (0.52 million ha area, 10.26 million tons production, 19.73 tons/ha productivity) and India, II rank (0.43 million ha area, 8.20 million tons production, 19.0 tons/ha productivity). Other countries in the descending order were USA, Spain, Mexico, Italy, France, Poland, Pakistan and Egypt.

Within India, as per 2017-18 figures, top 10 cauliflower growing states are West Bengal (74, 000 ha), Bihar (62, 000 ha), MP (46, 000 ha), Orissa (41, 000 ha), Haryana (40, 000 ha), Gujarat (25, 000 ha), Chhattisgarh (24, 000 ha), Jharkhand (22, 000 ha), UP (18, 000 ha) and Punjab (18, 000).

Bottle gourd (Lagenaria siceraria, 2n = 2x = 22, family Cucurbitaceae, monoecious, cross-pollinated but genetically behaving like self-pollinated crop), is grown primarily in India on large scale for consumption as cooked vegetables. Bottle gourd is considered to be one of the earliest species of plants to be domesticated by humans. Bottle gourds are regularly grown and consumed in various parts of the world, particularly Asia. Fruits of bottle gourds are harvested young and used as a vegetable. The mature, dried fruits have been used throughout the world for making storage jars and utensils and hence the name bottle gourd. Shoots and leaves are also cooked and eaten. Lately, bottle gourd juice is also becoming popular in India as a health drink. Other countries growing bottle gourd on limited scale are Sri Lanka, Indonesia, Malaysia, Thailand, Philippines, China, Hong Kong, Tropical Africa, Colombia and Brazil. After seed scooping, the hard rind is used as containers also. Seeds are used for oil extraction and oil is used as cooking oil.

During 2017-18, India produced 27 lakh tons (2.7 million tons) of bottle ground from 1.60 lakh ha (0.16 million ha) and this translated into a productivity of 17 tons/ ha (Horticulture Statistics at a Glance-2018, MAFW, 2018). Top six states producing bottle gourd on significant scale are Bihar, UP, Haryana, MP, Odisha, and Pujab, production being in the range of 135,000 to 650,000 tons.

Bitter gourd (Momordica charantia L., 2n = 2x = 22, family Cucurbitaceae, monoecious, cross-pollinated but genetically behaving like self-pollinated crop), also known as balsam pear, bitter melon, bitter cucumber, and African cucumber is rich source of vitamin C and iron and credited with medicinal use in management of diabetes. Fruits are cooked with other vegetables, stuffed, stir-fried, or added in small quantities to beans and soups to provide a slightly bitter flavor. The bitterness of most cucurbits is mainly due to cucurbitacins. The bitterness of bitter gourd is due to the cucurbitacin-like alkaloid momordicine and triterpene glycosides (momordicoside K and L) as reviewed by Behera et al. (2010). Bitter gourd is grown on approximately 340,000 hectares across Asia, with India and China accounting for more than half the production. Estimated area of bitter gourd in India is about 80,000 ha with production reaching to 10,00,000 resulting into a productivity of 12 tons/ha. States accounting for major area of bitter gourd are Chhattisgarh, Telangana, Andhra Pradesh, Orissa, Madhya Pradesh, Uttar Pradesh, Bihar, Tamil Nadu, Haryana and Assam.

Smooth gourd or sponge gourd (2n =2x = 26, Luffa cylindrica Roem syn. aegyptiaca, family Cucurbitaceae, monoecious, cross-pollinated but genetically behaving like self-pollinated crop) is not a global crop and is a vegetable crop very much indigenous to India and the adjoining countries. As per estimates, the acreage of this crop in India is about 50,000 ha spread over almost all the states but on a limited scale. However, UP, Bihar and West Bengal are the main states growing sponge gourd.

Origin and Domestication

It is agreed that sponge gourd may have originated from Asian sub-tropical areas, particularly India and India itself should be the centre of domestication as well because global presence of this crop is negligible (Kalloo, 1993). NBPGR, New Delhi publications unanimously mention Indo-Chinese and Hindustani gene centres as primary centres/domestication/secondary centres for Luffa species and in their publications, Luffa aegyptiaca is more commonly used than Luffa cylindrica for sponge gourd (Pandey et al., 2019).

Ridge gourd also known as ribbed gourd or angled gourd or silky gourd or angled loofah or vegetable gourd (Luffa acutangula (Roxb. L., 2n = 2x, family Cucurbitaceae, mostly monoecious and cross-pollinated but behaving like self-pollinated crop in term of no inbreeding depression) is not a crop of global importance; rather it is grown and consumed primarily in India and the adjoining countries which used to be part of greater India. In India, estimated area is 50,000 ha spread over almost entire country but the leading states are UP, Bihar, West Bengal, MP, Chhattisgarh, and Maharashtra, Karnataka, Tamil Nadu and north east hill region.

Origin and Domestication

Ridge gourd has similar origin as that of sponge gourd (refer to page 428).

Cucumber (Cucumis sativus var. sativus L., 2x = 2n = 14, normally monoecious, cross-pollinated) is a member of the economically important family Cucurbitaceae which includes squash/pumpkin (Cucurbita ssp.), watermelon [Citrullus lanatus (Thunb.) Matsum. & Nakai], melon (Cucumis melo L.) and gourds. After tomato (Solanum lycopersicum L.) and watermelon, cucumber and melon are cultivated more widely than any other vegetable species globally accounting for about 2.5 million ha and producing 43 million tons giving a productivity of over 17 tons/ha under field and greenhouse culture. Production of cucumber is the second largest of all cucurbits, where China, Iran, Russia, Turkey and the United States represent about 75% of the world production.

During 2017-18, India produced 1.25 million tons of cucumber from 0.08 million ha (80, 000) area resulting into a productivity of close to 16 tons/ha (MAFW, 2018). Top ten cucumber producing states in India in the same period are Haryana (17000 ha), MP (9500 ha), Karnataka (8300 ha), Assam (6900 ha), Maharashtra (4500 ha), Andhra Pradesh (4400 ha), Bihar (3900 ha), Punjab (3600 ha), Kerala (3400 ha) and UP (3300 ha).

Pumpkin (Cucurbita moschata, 2n = 2x = 40, family Cucurbitaceae, monoecious, cross-pollinated, behaving like self-pollinated crop genetically) is grown globally throughout in the tropical, sub-tropical and temperate regions of both the New and Old World. The term pumpkin is normally applied to the edible fruit of any species of Cucurbita when ripe as a table vegetable or in pie (Whitaker and Robinson, 1986). Squash and pumpkin are the words quite often used interchangeably. However, the term squash or summer squash is commonly used for Cucurbita pepo which is eaten as immature fruit also. The term pumpkin is used generally for all kinds of five cultivated species under the genus Cucurbita but is quite commonly used for C. moschata. Besides C. pepo (summer squash) and C. moschata (winter or baking squash), the other three species under the genus Cucurbita are C. mixta (squash), C. maxima (winter or baking squash), and C. ficifolia (squash, fig-leaf gourd, Malabar gourd).

While compiling statistics FAO clubs squash and gourd together with pumpkin. In 2017, world production of pumpkins (including squash and gourds) was 27 million tons, with China (7.8 million tons from 0.4 million ha) and India (5.0 million tons from 0.5 million ha) accounting for 47% of the total production. Russia, Ukraine, and the United States each produced about one million ton. As per APEDA (The Agricultural and Processed Food Products Export Development Authority), India produced 1.44 million tons of pumpkin which translates into 72000 ha area assuming a productivity of 20 tons/ha during 2015-16. The major states growing pumpkin in India are Orissa, UP, MP and Chhattisgarh. It is clarified that in context of India, pumpkin means C. moschata only although IIHR released a variety of C. maxima under the name Arka Suryamukhi in 1987 (Ram, 2012). However, now it is nowhere to be seen. Fruits of C. pepo (summer squash or zucchini) now can be seen in limited scale in superstores and limited scale cultivation is certainly happening under protected cultivation of this crop in India. Under this chapter, only C. moschata is being dealt with under the term pumpkin. Pumpkin is now becoming popular in India due to its high productivity, nutritive value, good storability, long period of availability and better transportability. It is rich in vitamins particularly precursor of vitamin A and minerals.

Watermelon (Citrullus lanatus (Thunb.) Matsam. & Nakai, 2n = 2x = 22, family Cucurbitaceae, cross-pollinated crop) is grown commercially in areas with long frost-free warm periods. Three-fourths of the world production is grown in Asia, with China the leading country in production. Watermelon is a nutrient-rich food full of vitamins, minerals and antioxidants. It also contains niacin, thiamin, vitamin B-6, zinc, magnesium and many more nutrients. There are many health benefits to watermelon as it is low in calories so it promotes phyto-nutrients and anti-oxidants essential for the optimization of health.

At global level, China tops in watermelon production (79 million tons) with other countries falling far behind, namely, Turkey (3.9 million tons), Iran (3.8 million tons), and India (2.5 million tons). During 2017-18, India produced 2.5 million tons of watermelon from 0.1 million ha (1 lakh ha) acreage and thus Indian watermelon productivity is 25 tons/ha. Top five states having area more than 10,000 ha in India are West Bengal (17,000 ha), UP (14,000 ha), Odisha (12,000 ha), AP (11,000 ha) and Karnataka (10,000 ha).

Melon or muskmelon (Cucumis melo L., 2n = 2x = 24, family Cucurbitaceae, mostly andromonoecious, cross-pollinated as well as self-pollinated) has latest global production close to 30 million tons where top ten producing countries are China (16.0 million tons), Turkey (1.8 million tons), Iran (1.6 million tons), Egypt (1.1 million tons), India (1.0 million tons), Kazakhstan (0.9 million tons), USA (0.8 million tons), Spain (0.7 million tons), Italy (0.6 million tons), Guatemala (0.6 million tons). India produced 1.2 million tons melons from 54000 ha acreage during 2017-18 giving a productivity of 22 tons/ha (MAFW, 2018).

US melons encompass the netted, salmon-flesh cantaloupe; the smooth-skinned green fleshed ‘Honey Dew’, the wrinkled-skinned, white-fleshed ‘Golden Beauty’ and several other dessert melons. Other forms with different fruit characters (white-fleshed, green-fleshed, having striped thin skin and juicy) are commonly found in India and in Orient as indigenous land-race cultivars. These are getting displaced by the cultivar types as cantaloupe, Madhuras and Galia due to their long shelf life.

Melon is mainly cultivated for the consumption of the fruits which can be harvested immature; in this case, the fruit is not sweet and can be eaten raw, cooked or pickled. In most cases, the fruit is harvested at maturity with high sugar content (mainly sucrose). Fruit is mainly eaten raw; marginal uses are cubes canned in syrup, in “fruits confits”, candies, ice-creams, biscuits and also in cosmetics. Locally, seeds can also be consumed (Pitrat, 2008).

Onion (Onion cepa, 2n = 2x 16, highly cross-pollinated, family Amaryllidaceae), is a valuable vegetable crop for the people all over the world. Tomato, onion and potato put together have been given a nick name as TOP seeing their combined importance globally. As per Ministry of Agriculture and Farmers Welfare-Horticulture Statistics Division, Government of India (MAFW, 2018), the global acreage, production and productivity of onion during 2016 were 4.96 million ha, 93.17 million tons and 18.80 tons/ha. Top 10 onion producing countries in the world are China, India, Egypt, USA, Iran, Turkey, Russian Federation, Pakistan, Brazil and Argentina. During 2016, China occupied I rank with area, production and productivity figures of 1.09 million ha, 23.91 million tons and 22.00 tons/ha. India was closely at II rank with corresponding figures of 1.20 million ha, 19.20 million tons and 16.18 tons/ha. Productivity-wise, USA is at the top rank (56.40 tons/ha), followed by Iran (37.95 tons/ha) and Egypt (36.71 tons/ha). The Netherlands is the world’s largest onion exporter with a total of around 800,000 tons, which is ca. 80% of its total annual production (Shigyo and Kik, 2008).

Within India, which produced 19.20 million tons of onion from 1.20 million ha (12 lakh ha), the major onion producing states during 2017-18 have been as given

Radish (Raphanus sativus, 2n = 2x = 18, family Brassicaceae or Cruciferae, cross-pollinated crop) is grown over 7 million ha where China, Japan, India, South Korea, and Europe are the main producers. As per Horticulture Statistics at a Glance-2018 (MAFW, 2018), India produced 30 lakh tons of radish from 2 lakh ha acreage with a productivity of 15 tons/ha during 2017-18. Ten top ranking states in India with acreage within the range of 6000 to 33000 ha are West Bengal, Haryana, Bihar, Assam, Punjab, Chhattisgarh, Orissa, Madhya Pradesh, Uttar Pradesh and Karnataka.

Today, radishes are grown throughout the world. Different local people prefer to use various parts of the radish plants including roots, leaves, sprouts, seed pods and oil from seeds as their food according to their own custom. Radishes are low in calories and high in vitamin C, folate, and potassium. Radishes contain sulfurous compounds, such as sulforaphane, which have anti-cancer properties, and are expectorant.

Carrot (Daucus carota, 2n = 2x = 18, family Apiaceae or Umbelliferae, cross-pollinated) is among the top ten most economically important vegetable crops globally in terms of area, production and market value (Simon et al, 2008). Almost half of the more than 42 million tons of the global production -by far- is harvested in China, followed by Uzbekistan, Russia and the United States of America. Ukraine, Poland, United Kingdom, Germany, France and Japan complete the top 10.This production comes from approximately an area of 1.5 million ha giving a productivity of 28 tons/ha. India produced 1.6 million tons of carrot during 2017-18 from 96000 ha area resulting into a productivity of 16.66 tons/ha. In India, top 7 states in carrot production are Haryana, Bihar, Punjab, MP, UP, Karnataka and Assam. Because of breeding of cultivars adapted to both summer and winter seasons, carrot is available round the year.

The conventional orange colour varieties of Europe are rich in beta carotene, a precursor of vitamin A and contain appreciable quantity of thiamine and riboflavin. The red carrots are rich in lycopene, an important pigment for healthy eyes and general body growth, besides having anti-cancerous properties. Black carrots are rich in anthocyanins. Further, carrots have medicinal properties.

Carrot has two distinct groups with regard to flowering and seed production. These are tropical and temperate types. Tropical or oriental cultivars are annual and adapted to high temperature conditions and these do not require low temperature exposure for flowering. They flower and set seeds freely in Indian plains after winter months with the advent of long day conditions in spring. The temperate/European types behave like biennial crops and require 6-8 weeks of vernalization at mean temperature of 4.8 to 10° C after they have passed the full root development phase for production of seed stalks (Sureja and Kalia, 2012).

Vegetable pea also known as garden pea (Pisum sativum, 2n = 2x = 14, family Fabaceae, formley Leguminosae, sub-family Papilionaceae), is rich in vitamins and sugars. Its green immature grains are consumed as fresh vegetables. Picked peas, are canned, frozen and dehydrated or freeze dried for super stores markets. Those associated with the immature pod are the snow, sugar or sugar snap types where pods are consumed. The total pea production world-wise has steadily increased owing to increasing green pea volume and top five countries are China (1.4 million ha), India (0.50 million ha), United States (0.08 million ha), United Kingdom (0.04 million ha) and Algeria (0.04 million ha). For field pea, the major producing countries are Russia, China, Canada, Europe, Australia and United States.

India produced 5.42 million tons of garden pea from 0.54 million ha area during 2017-18 giving a productivity of 10 tons/ha. The major garden pea producing states in India in descending order are UP, MP, Punjab, Himachal Pradesh, West Bengal and Assam. UP alone accounts for 40% of the total garden pea area. Within UP, major districts contributing to the vegetable pea are Jalaun, Lalitput, Jhansi, Mahoba, Kasganj, Etah, Sultanpur, Azamgarh, Hamirpur, and Amethi (MAFW, 2018).

1.1 Weather Parameters

The atmosphere is a gaseous component surrounding the earth as an integral part and its interaction with ocean (water bodies), other planets of the solar system and land (Earth) generates one physical product namely weather elements (temperature, pressure, wind, humidity, precipitation, etc.,) and these form the weather and climate of the Earth. The process of generation of weather and climate of the region is purely natural and cannot be modified by the human being. But they can do adaptation to the existing climate and weather for their sustainable life. The weather can be defined as day to day change in the atmosphere in terms of heat and moisture exchange, while the climate is average of long period weather covering larger area or a region.

The particular climate of a region dictates/permits the genesis of a particular bio-organism in that domain and this selected organism’s growth and multiplication are triggered by the prevailing weather of that particular climate. Hence weather parameters of the atmosphere are very important to human being and other organisms of the Earth. The details on weather elements are given in question and answer section of this book (Annexure-I)

The climate, the past weather event that existed over larger region and covering long years of more than 30 years is very important for the emergence and successful sustenance of an organism including human kind. Normally scientists talk about environment and this includes not only the soils but also the climate of the particular region. Based on this, during 1989, the Planning Commission of India divided the entire India in to 15 agro-climatic zones based on physiography and climate. This division is only for planning purposes. Subsequently under NARP, the Indian Council of Agricultural Research (ICAR), New Delhi in consultation with the Planning Commission, requested all State Agricultural Universities (SAU) to divide their State in to different sub climatic zones considering soils, temperature and other weather parameters preciously with in the major agroclimatic zone of India in which the concerned State falls. Accordingly, each SAU has divided their State into different agro-climatic sub-zones and this resulted in 129 agro-climatic sub zones in India and limited to 127 and these all fall within 15 agro climatic zones of India as done by the Planning Commission of India.

The National Bureau of Soil Survey and Land Use Planning (NBSS&LUP), Nagpur not satisfied with this division, considering soils, temperature, rainfall, vegetation and all factors responsible for ecosystem (bio-climate, length of growing period, moisture index) divided the whole India in to 20 agro-eco regions by 1992 and revised preciously again by 2015 (Mandal et al., 2016) and the revised approach is being considered as scientific tool and taken for micro-level planning in India now and those are discussed at this chapter.

The subject on micrometeorology deals with small scale meteorology of near ground surface with its related elements of both physical and biological processes. When this micrometeorology is integrated for crop production purposes, then it becomes crop micrometeorology, which is very important in the science of agricultural climatology. This crop micrometeorology gets varied with the architecture of the crops grown, available soil moisture, agronomical practices followed, soil texture, topography of the area, the nature of climate and weather that prevails etc. The soil surface heat, exerts a profound frictional effect on wind movements and hence it is different from the air layers at higher levels. These special features constitute the microclimate, which is modified compared to a flat bare surface by factors like topography, nature of soil surface, presence of vegetation and type of vegetative cover. The presence of crop canopy leads to distinct differences in the thermal and humidity regimes of the soil, the air layers immediately above it and the distribution of radiation and wind profiles inside the canopy. The study on the physical exchanges of the transfer of heat, momentum and moisture in the microclimatic region is called as micrometeorology (Venkataraman and Krishnan, 1992).

Radha Krishna Murthy (2002) reported that the micrometeorology is the micro scale of both the physical and meteorological factors that are taking place within the ecosphere. The ecosphere means the area between just above the crop canopy and just below the root zone of a crop. Further he was on the opinion that the microclimate of valley is important as compared to the entire climate of the mountain for the bio-life of valley. For the crops purpose, the microclimate is the climate of the ground surface to top of the crop canopy or otherwise it can be called as crop’s climate, a modified one from the Stevenson’s Screen climate/weather observation.

4.1. Introduction

Many countries have set up a network of agrometeorological observatories to regularly record important weather parameters such as clouds, rainfall, surface temperature, humidity, wind and wind direction, solar radiation, soil moisture, temperature and humidity profile of the atmosphere, etc. The observation process is performed either manually or through Automatic Weather Stations (AWS).

This recorded information is used for weather forecasting, natural resources management and for tracking agricultural production. However, these networks, which handle data of high spatial climate variability, are typically less robust than they should be. Moreover, the agrometeorological data collected from different ground stations is not transmitted in real time to a central collection point which limits the use of information.

Satellite remote sensing technology is an alternative system that is gaining popularity in the recent times which has allowed us to obtain frequent and precise measurements of vital agrometeorological parameters such as rainfall, solar radiation, temperature, evapotranspiration, albedo etc. Satellite data has many advantages over traditional ground stations, such as high spatial resolution (50 m–5 km), wide spectral bandwidth range (0.4–3.75 um) and high temporal frequency (even half an hour) and the prospect of collecting data from remote areas. In addition to routine repeated observations, satellites often provide synoptic views of the earth’s surface from space on a wide scale and have archive of information to create baseline data.

The preparation, planning and use of agricultural technologies for agriculture, needs application of agricultural meteorology. The role of agrometeorology in the last three decades has increased in terms of increasing food and nutritional security for the burgeoning population and natural resource management particularly in the context of global climate change. Agrometeorology can help to minimize inputs, thus clarifying the contribution of ecosystems and agriculture to the carbon budget in the event of global change. Agrometeorological information needs to be disseminated to users in time and space quite accurately, as agricultural activities are linked to the very local situation where the outputs of modern tools such as local area models, climate models, and dynamic crop simulation models are reduced to finer grid resolution and combined using GIS to extract practical suggestions. This chapter describes the recent applications of remote sensing in Agrometeorology.

5.1 Introduction

A Crop Simulation Model is a mathematical model which describes crop growth and development processes as a function of environment, soil conditions, and crop management. Simulation model is a schematic representation which works on set of underlying assumptions, equations and algorithms, closely replicating the behaviour of the agricultural systems. A crop growth simulation model predicts the harvestable yield. Apart from this final state of crop production, the model also provides a host of quantitative information about major processes involved in the various stages of crop development. The information covers each component of the crop such as leaves, stems, roots and harvestable products as they change over time, including the changes in soil moisture and nutrient status.

An increase in the population, demands an increase in agricultural production with available resources. Efficient management of available resources under varying weather conditions is important for increasing agricultural productivity. Besides that, the emphasis of agricultural production changes from quantity to quality and sustainability (Aggarwal et al., 2000). Solution of these new challenges lies in understanding the interaction of the numerous elements affecting the plant growth and generating a crop growth model. This extremely complicated information needs to be processed and interpreted on a spatial scale. Information technology which has unleashed new frontiers in data analysis and automation is the driving force behind this model generation. These powerful computer programmes simulate the crop growth or yield of crops under various management regimes and provide near real time information to help farmers to make strategic decision in the management of their crops.

Under normal weather situation, agriculture depends on timely occurrence of rainfall for crop management activities irrespective of different farming situations namely, irrigated and unirrigated agriculture. Changes in temperature and rainfall pattern together with frequent occurrence of extreme weather events are major anticipated threats from the climate change that occurs now around the world. This threat in long run, if not addressed properly, would affect food security of a country. Pratap Narain et al., (2000) observed an increase in moderate and severe drought occurrence numbers in the arid zone of India during last decade (1991-2000) as compared to the earlier decades of the last century. Similarly, Pasupalak (2008) reported daily maximum rainfall of 400.3 mm in the last decade against earlier record of 256.4 mm (1969–78) in a location at Odisha State. Further the inter- annual variation within the decade did increase and also the number of rainy days with very heavy rainfall > 125 mm also found increased in the location against the daily mean rainfall of 20 mm/day in India.

A day may be with heavy rainfall or with bright sunshine or windy or in combination of these. When heavy rainfall continues for more than a week with some system like cyclone, floods may be the result. Similarly, if dry spell continues during a cropping season for more than 15 days, drought would initiate in that region. This is again depending upon the nature of the soil water holding capacity and nature of soils, topography and green cover of that region. In between these two extremes, we have normal season, where we get normal seasonal rainfall during a cropping season. Hence like dress code, in agro-climatology, there are three weather codes, namely floods code, drought code and normal code. The jargon weather code was developed by Dr.M. S Swaminathan in India. Across the countries of the World, if these weather codes occur, the impact would be universal. The strength of adaptation capacity to maneuver these extreme events by the farming community rests with their past experience made for similar situations, financial support and also the technology options that are available from the scientific institutions.

7.1 Importance of Weather Forecast in Agriculture

In India, agriculture is in reality to be a “gamble activity” with the monsoon rain, that means the productivity and profit from agriculture depend upon the goodness of the season. If any malevolent weather situation that happens during a crop season, whether it is at the beginning of the crop season or at the mid of the crop season or at the terminal of the crop season or at the whole of the crop season, the productivity of the crops raised would be under stake. In practice the irrigated crop area is lesser than the area under unirrigated crop in India in any region except the regions where irrigation is routed through perennial rivers. Normally the production from unirrigated crop is 30 to 40 per cent of the same crop grown under irrigated condition in an environment in the same season.

In India, in a region or in a taluk, if the irrigated area is lesser than 30 per cent of total cultivable area, there is every opportunity for the occurrence of food shortage. That means assured production depends upon irrigation rather than managing the crops with seasonal rainfall alone. This clearly indicates that the higher probability of occurrence of crop production risks falls under rainfed/dry land situation. The crop production risk is also common to irrigated area like unirrigated crop but the intensity gets varied. In this context one example that happened in India can be quoted. During December- January of 1982, with the occurrence of heavy rain/snow as a result of prevalence of western disturbance weather system, the wheat crop stood for harvest at Punjab got damaged with a loss of 124 crore of rupees. If this was anticipated earlier through weather forecast development, (which is common in all developed countries) and communicated to the farmers in advance, then the yield loss would have been reduced by following some tactical decisions to be taken either by the farmers or by the concerned Government. At that time, India did not have medium range weather forecast system and hence Indian farmers met with greater losses.

8.1 Climate Change

Climate change is a broad term of global negative phenomena as created predominantly by burning of fossil fuels, which add heat-trapping gases to earth’s atmosphere. The over accumulation of greenhouse gases in the atmosphere lead to increased temperature and this is called as global warming. As a result, sea-level rise; ice mass loss in Greenland, Antarctica, Arctic and mountain glaciers worldwide; shifts in flowering/ plant blooming; and extreme weather events occur.

Livestock population meet the protein requirement of humans in addition to meeting from plants. The food chain starts from fodder crops to animals and from animals to humans. In human physiology, digestion of plant protein is much easier than animal protein, but however the digestion depends on climate (temperate climate, sub-tropical climate, tropical climate etc.,) wherein human kind live. Similar to crops, there is strong interaction between livestock and meteorological weather elements (temperature, relative humidity, wind etc.). But detailed study has not been published elaborately in scientific journals in the past. The weather elements have greater influence on livestock productivity in terms of milk, meat, skin, wool etc., pest and disease infestation and their housing needs. In this chapter how weather elements influence shed management, pest and disease problem and animals’ productivity and are discussed. In majority of the Veterinary and Animal Science University in India, they have one division on animal climatology, wherein both research and extension aspects are being attended. However, in depth research is the need of the present decade, since little works have been done in the past on animal climatology.

Irrespective of weather elements, the heat stress due to the combination of temperature and relative humidity plays important role in affecting the productivity of animals. There is a range of thermal conditions within which animals are able to maintain a relatively stable body temperature by means of behavioral and physiological means. Heat stress results from the animal’s inability to dissipate sufficient heat to maintain homeothermy (Sejian et al., 2017). High ambient temperature, relative humidity and radiant energy compromise the ability of the animals to dissipate heat. As a result, there is an increase in body temperature, which in turn initiates compensatory and adaptive mechanisms to re-establish homeothermy and homeostasis. Homeostasis refers to the tendency to maintain a balanced or constant internal state that is optimal for functioning. Animals have a specific balanced or normal body temperature. When there is a problem with the internal functioning of animal body, this temperature may increase, signaling imbalance. As a result, body attempts to solve the problem and restore homeostasis for normal body temperature. These readjustments generally referred as adaptations and this is essential for survival of the animals.

Astro-meteorology is considered as one of the branches of Astronomy along with Astrophysics, Astrobiology and Astrometry. Astronomy is the science that deals with the material universe beyond the earth’s atmosphere. It studies the nature and constitution of Celestial (heavenly) bodies and the laws which govern them including the effect they produce upon one another. It seeks to unravel the probable past history of heavenly bodies and their development. There exists a confusion between the branches of Astronomy viz., Astrophysics and Astro-meteorology with the term Astrology. Astrophysics uses principles and laws of physics to explain how Celestial bodies form and function or in other words it will help to ascertain the nature of the astronomical objects, rather than their positions or motions in space. However, the Astrology and Astro-meteorology are the subjects deal in future prediction and often considered as pseudo-science which uses position and movement of stars and planets for that purpose. Astrology links these to predict the human behaviour, while that of Astro-meteorology links the same to predict the future weather.

From ancient days, these predictions are based on one’s wisdom and knowledge in astronomy and often these astrologers are astronomers who keenly watch the stars and planets movement and guide their rulers and farmers with their guesstimates. Till date it is being lore, mainly passed to followers of this group and the methodology is not documented clearly and properly. There are many incidences of falsified predictions of astrology as reported by many reviewers elsewhere and we are not discussing the same here, owing to our interest in weather prediction i.e., astro-meteorology only. However, we have to recognize the works of the ancient astrologers who helped in developing the astronomical science.

Basically, there are two approaches in astrology viz., geocentric and heliocentric as used by the practitioner of astrology worldwide. As the name implies the Geocentric astrology is based on the calculation of planetary position as seen by the observer from the earth and thus earth is centre, while Heliocentric astrology bases its interpretation upon position within solar system with reference to the sun as centre. Though in true sense, the sun is the centre, the effect of motion as manifest on the earth is the basis of most astrological interpretation. Hence, vast majority of astrologers employs the geocentric calculations of the planetary positions for their predictions.

Analytical Chemistry

The science involving the determination of the constituents in terms of elements and compounds is called Analytical Chemistry. It is used to identify the substances found in a material and to quantify the exact amount of substances in them.

The basic principles involved in Analytical Chemistry are changes takes place in the substances by the process of combination, decomposition, replacement and double decomposition.

Laboratory analysis is an important part in any branch of chemistry and analytical chemistry in particular. To undertake the analysis, both apparatus and equipments are needed.

Standard solutions

Standard solutions are solutions of accurately known concentration

Different standard solutions are