eChapters

Despite substantial advances in the diagnostics and treatment of diseases, parasitic infections are a major global health issue causing significant mortality and morbidity. Currently, chemotherapeutic antiprotozoal drugs, anthelmintic and anti-ectoparasitic agents are used to treat, but resistance to these drugs has developed due to overuse. In this scenario, nanoparticles are proving a major breakthrough in the treatment and control of parasitic diseases. In the last decade, there has been enormous development in the field of nano medicine for parasitic control. Gold and silver nanoparticles have shown promising results in the treatments of various types ofparasitic infections. These nanoparticles are synthesized through the use of various conventional and molecular technologies and have shown great efficacy. 

 

Nanotechnology holds immense promise in bolstering environmental protection and sustainability by revolutionizing approaches to monitoring, addressing, and amending environmental pollutants. This paradigm shift extends to resource conservation and energy efficiency through the innovation of more adept technologies. Yet, as we harness the potential of nanotechnology, it is of prime importance to meticulously evaluate its environmental and health implications, instating stringent measures to mitigate risks. Responsible and sustainable development, coupled with effective regulation, is imperative.

In agroforestry systems the various components like tree, crop and pasture exist in different proportions and orientations. It is difficult to find out which agroforestry system is the best suited for a given land situation. Similarly, it is to be decided which technologies are required for refinement and improvement of the existing agroforestry practices. But without sufficient knowledge of the existing system in a particular land situation, it is very difficult to set the research priorities for modification and development of this system. Diagnosis and Design (D & D) is a systematic and objective methodology developed by International Centre for Research in Agroforestry (ICRAF) to initiate, monitor and evaluate agroforestry programmes. D & D is based on the philosophy that knowledge of the existing situation (diagnosis) is essential to plan and evaluate (design) meaningful and effective programmes in agroforestry research for development. The methodology plays a strategic role in all the phases of the agroforestry research process. D & D in agroforestry is unique and it has been specially developed for the following purposes.

About two-thirds of the developing world’s three billion rural people live in about 475 million small farm households, working on land plots smaller than two hectares. Many are poor and food insecure and have limited access to markets and services. Their choices are constrained, but they cultivate their land and produce food for a substantial proportion of the world’s population. Besides farming, they have multiple economic activities, often in the informal economy, to contribute towards their small incomes. These small farms depend predominantly on family labour. In China, nearly 98 percent of farmers cultivate farms smaller than 2 hectares – the country alone accounts for almost half the world’s small farms. In India about 80 to 85 percent of farmers are small. In Ethiopia and Egypt, farms smaller than 2 hectares constitute nearly 90 percent of the total number of farms. In Mexico, 50 percent of the farmers are small; in Brazil smallholders make up for 20 percent of the total number of farmers (Rapsomanikis, 2019).

Extension teaching methods: Methods by using them new information can

pass freely between the extension worker and rural communities. Extension

education is mainly concerned with the dissemination of useful and practical

information relating to rural life and helping the rural people in the practical

application of such knowledge to rural situations. Extension teaching methods

can be classified on the basis of:

Some Definition

Farmer’s call: Call made by a farmer or homemaker at the working place of

the extension agent for getting information.

Adoptive/minikit trial: It is a method of determining the suitability of a new

practice in farmer’s situation.

Farm clinic: It is a facility developed for diagnosis and treatment of farm

problems and provides specialist advice to individual farmers.

Field day/ Farmer’s day: Methods of motivating the people to adopt a new

practice by showing what has actually been achieved by applying the practice

under field condition.

Introduction

Soil aeration status involves the rate of such ventilation, as well as the proportion of pore space filled with air, The composition of that soil air and the resulting chemical oxidation or reduction potential in the soil environment. Water provides the base for food, nutritional and environmental security. Soil water plays a significant role in controlling the energy balance of the soil and its overlying micro-environment by modifying its radiation exchanges and thermal properties. Soil temperatures affect plant and microorganism growth and also influence soil drying by evaporation. It is a central maximum of ecology that “everything is connected to everything else.” This interconnectedness is one reason why soils are such fascinating and challenging objects of study. In this chapter we shall explore three aspects of the soil air, water and temperature.

Introduction

Soil resource catalogue provides an insight into the capability and the constraint

of mapped area for its optimum exploitation towards developmental planning.

For this motive soil survey series as an essential tool. Soil survey is essentially

a study and mapping of soils in their natural environments and systematic

examination, description, classification and mapping of soil of area.Soil survey

contains a group of compound operation involving

•             To study important properties of soils and associated land features.

 •            Define taxonomic units through correlation and classifications of soils.

•             To establish and draw a border of different kinds of soils on standard

topographical base map through mapping of soils.

 •            Transfer of technology from research farm to farmer ‘s field under

different soil condition and management practices.

Introduction

 India, situated between the latitude of 08004’ and 37006’ N and longitudes of

68007’ to 97025’ E, has a geographical area of 329 Mha. Physiographically, it

can be divided into three broad regions, viz., Peninsula (a triangular Plateau in

the Deccan and South of the Vindhyas), Mountain region of the Himalalayas

(Extra-Penninsula), and the Indo-Gangetic Plain separating these two regions.

Geologically, a great part of the Penninsula is occupied by the gneiss, schists

and other rocks of diverse nature. Red soils (Alfisols) generally predominate in

this region. The western and central parts predominate in basaltic rock having

Black cotton soils of different thickness (Vertisols, Inceptisols). The mountain

region shows the development of marine sediments of all ages, especially, in

north of the Himalayas. The vast Indo-Gangetic and other plains of Pleistocene

origin are composed of alluvium of the great river systems flowing in this

region. The alluvial soils of this region depend on the age of alluvia and degree

of development.

Climatically, India shows three distinct seasons:

 i) Cool and mainly dry winters from November to February

ii) Hot and mainly dry summers from March to June

iii) Monsoon rainy season from mid-June to September.

Introduction

 Salinity is a form of salt that occurs naturally within soils or water. When soil

becoming salty form that is called salinization, it can be caused by mineral

weathering called as natural process but it can be caused by irrigation called

as artificial process. Saline or salty soil have a high salt content like sodium

chloride (NaCl also called table salt). Salinity is like- abiotic stress for plants

and reduced the plant growth but not for all because some of them crops are

survive in better way for growth and development such as barley, sugerbeet,

cotton and mustard etc. Basically, stress are two types-biotic and abiotic

stress. Abiotic stress are also called nonliving stress like- drought, salinity,

submergence, heat, cold and temperature that are affect to plant life cycle so

that are called as abiotic stress. Natural water and all types of soil both contain

soluble salts. Amount of salt affected to weather of soil, when excessive salt

present in soil and it adversely affects to crop growth and developments. Salt

affected soils exist under arid and semi-arid climates. Major constitutions of

soluble salt in soil are the cations and anions. Cations are containing sodium,

calcium, magnesium and anions are contains chloride, sulphate, carbonate and

bicarbonate. Saline soil have <8.5 pH, >4EC (dS/m) and <15 ESP. where EC

is eclectical conductivity that is measure of soil salinity and ESP stand for

Exchangeable sodium percentage.

Introduction

Microbial diversity is one of the main factors characterizing natural ecosystems; soil is considered one of the best storehouses of useful microorganisms in the world. Although the role of most of these microorganisms is still unknown, scientific progress is providing a better comprehension of the specific ecological functions of soil microorganisms (Ahmad, I.et al., 2008). Microorganisms in the rhizosphere soil play a key role in maintaining the soil fertility (Yadav et al. 2015), which is key for successful natural crop production to meet the increasing global organic food demand. Soil acts as a reservoir of air, water, and nutrients that is essential for plant growth. Only a few grams of soil contain hundred million to billion microorganisms. Bacteria are the most abundant microbes in soil followed by fungi; however, the actinomycetes are ranges in between bacteria and fungi. Other microbes that are found in smaller numbers are algae, cyanobacteria, protozoa, and nematodes. Soil gives the necessary support for anchorage to plant roots (Yadav et al. 2012; Bhaduri et al. 2015).

Introduction

Climate change is threatening food security globally. Countries like India are more vulnerable in view of the tropical monsoon climate and poor coping capacity of the small and marginal farmers. Several agricultural practices like indiscriminate use of agro-chemicals and crop residue burning contribute to emission of greenhouse gasses leading to warming of the atmosphere. Sequestration of carbon both in the vegetation and soil is the most effective means of mitigating GHG emissions. There are several strategies of soil carbon sequestration which can be adopted at farm level. These include: conservation agriculture, biomass recycling, crop rotations and use of organic amendments. One of the recent developments is the conversion of crop residue biomass into biochar and using the char as a soil amendment rather than directly using the crop residues. Several studies show that biochar has a long life in soil and is more effective in sequestering carbon besides improving other soil properties like water holding capacity and nutrient availability. In Indian conditions, there is an immense scope for converting millions of tonnes of crop residues which are not used as fodder into biochar and use the same for enriching soil carbon.

7.1 Introduction

The occurrence of different medicinal and aromatic plant species is often associated with a specific ecology and thereby, to a biogeographical or phytogeographical region of the Indian Subcontinent. The Indian Subcontinent is a confluence of at least two biogeographical realms, i.e., Palearctic or Palaearctic (Himalayas) and Oriental (Sino Indian- mainland India to much of insular the Southeast Asia). The most acknowledged classification of biogeographical zones was proposed by Udvardy (1975), which recognized 12 biogeographical provinces in India falling in these two realms. Based on varied climate, terrain, and faunistic information, Roger and Panwar (1988) tried to distinguish India into 10 distinct bio-geographical regions. Their classification did account for distribution of the plant-communities because they provided information about key components to identify the probable habitat for the presence of animals. An attempt for phytogeographical zonation, based on type of vegetation by Gadgil and Meher Homji (1990), distinguished 16 phytogeographical zones. Rodgers et al. (2002) further revised their biogeographical maps using geographical information system (GIS) techniques. They distinguished 10 biogeographical zones and 26 biotic provinces.

Sample Preparation

a) Plain products: Sample should be softened at room temperature. Since the melted fat tends to separate and rise to the surface, it is not advisable to soften the sample by heating on a water bath or oven or flame. Mix thoroughly by stirring with spoon or eggbeater or by pouring back and forth between beakers.

b) Ice-cream containing Fruits and Nuts: Fill one third part of the cup with ice cream sample. Melt the product at room temperature and mix until insoluble particles are finely divided (about 3-5 minutes for fruit pieces and upto 7 minutes for nut pieces). Otherwise, the product may be ground in a porcelain or glass pestle and mortar. Don’t let temperature exceed 25oC at any time during softening and mixing steps. If fat separation occurs, discard sample otherwise immediately pour mixture into wide jar and cap tightly. If allowed to stand, shake vigorously before taking sample for analysis.

1 Detection of Starch Introduction

Starch is widely available in several forms such as wheat flour, corn flour and commercially manufactured starch. It is extensively used by adulterators to raise the SNF content in the milk. When high amounts of starch are added to milk, it can cause diarrhea due to the indigestion of starch in colon. Apart from this, accumulation of starch in the body may prove very fatal for diabetic patients. In this method, starch in milk can be detected by using iodine solution. Iodine from the iodine solution gets absorbed on the starch molecule surface and resultant product of adsorption has deep blue colour.

Reagents

 • Potassium iodide

 • Iodine solution - 1% (Add 1 g of iodine and 5 g of potassium iodide in

distilled water and dilute to 100 ml)

1.1 General

Biomass is a renewable and plentiful energy source with enormous potential to meet the rising demand for clean and sustainable energy solutions. This chapter offers an overview of biomass and its conversion technology, which includes various techniques to transform biomass into useful forms of energy like heat, electricity, and biofuels.

Biomass is an organic substance obtained from plants, animals, and microorganisms. It can be utilized as a source of energy or as a basic material in various applications. The energy in biomass is derived from photosynthesis, during which plants convert sunlight, carbon dioxide, and water into organic matter. Since it comes from living or recently deceased organisms, it is a sustainable and renewable resource. In terms of carbon dioxide emissions, biomass is considered a carbon-neutral energy source because the carbon dioxide produced during combustion is offset by the carbon dioxide absorbed by plants during their growth.

Site of incision: Make a midventral incision on the neck from larynx up to thoracic inlet then make ventrodorsal incision from both ends of this incision up to mid dorsal aspect of neck region.

Introduction

India is one among the progressive countries in the world in maintaining food and nutrition database efficiently. The country has been in the fore front in signing the resolution on ‘Transforming the World: the agenda for Sustainable Development-2030’. India outstood among the developing countries in food self-sufficiency since seventies with low household hunger rates and low infant mortality rate. In the meanwhile, the country faced double burden of food and nutrition with inadequate dietary intake and under nutrition in one hand and overweight due to low physical activities on the other hand. Rapid increase in population with diminishing food production led to food insufficiency and malnutrition whereas, rapid economic growth and increasing mechanization led to the increasing prevalence of overweight and obesity. Both the under- and over nutrition are associated with health hazards, hence, use of normal body mass index (BMI)would be considered as an indicator for food security (FAO, 2013)

Mushrooms is known for its delicious and nutritious food with highly digestible lysine rich protein, vitamins and minerals, Mushroom serves as a low calorie food which lacks fats and are low in carbohydrate. They are rich in folic acid, phosphorus, potassium, calcium, copper and iron and vitamin-B complex. In place of starch, mushroom contains sorbitol and linolenic acid. They are excellent sources of thiamine, riboflavin, niacin, pantothenic acid, biotin, folic acid and vitamin B-12. Further, mushrooms are also reported to have high medicinal attributes. A large number of mushrooms contain biological active polysaccharide protein complex having anti-tumor, immune-modulating and antioxidant properties.

India, the second most populous country in the world after China, is trying hard to provide basic needs like food, shelter, clothes, electricity and education facility to its 1,316 million people and to upgrade itself from the stage of ‘Developing economy’ to ‘Developed economy’. Table 1.1 depicts the trend of population increase from 1154 million to 1316 million during 2009 to 2018 with diminishing growth rate from 1.42% to 1.12%. Growing demand of ever increasing population has been met so far by over exploiting natural resources like land, water, fossil fuels, forests and mineral resources which resulted rapid unplanned urbanization, quick depletion of fossil fuels, more and more waste generation, alarming increase in environmental pollution, deforestation with loss of plant and animal species, desertification of cultivable land due to soil erosion, soil contamination & soil salinity and increase in health diseases due to malnutrition, starvation and environmental pollution.

Production of any selected species of earthworm in a particular place adopting semi-natural condition is called vermiculturing. As discussed earlier in chapter 2 and 4, commercial production of certain earthworm species is essential to meet up the huge demand of earthworms for vermicomposting of organic wastes, for production of earthworm meal for pet animals, poultry and fish farming, for preparation of medicine and for their use in reducing toxic chemicals from soil and water, etc. Since during vermicomposting, earthworm multiplies in vermicompost beds, many people confuse between this two terms – vermiculturing and vermicomposing.

Solid waste disposal has become Nation’s great concern since after spending more than 50 percent of their budget by Municipalities, they could collect and dispose about 70% of MSW leaving many parts of the municipality unclean every day and residents are not at all satisfied (Sannigrahi, 2016). The Central Pollution Control Board (CPCB) collected data from 299 cities of India on the mode of collection of MSW and found that manual collection comprised 50% while collection using trucks comprised only 49% (CPCB Report, 2000). It is very interesting to note that majority (more than 90%) of MSW are disposed by dumping in unscientific open land filling on outskirts of towns and cities while 10% of collected and 2% of uncollected MSW are burnt in open condition.

The present study on trichology of domestic and wild animals was conducted in the Postgraduate laboratory of the Department of Veterinary Anatomy and Histol ogy, Nagpur Veterinary College, Nagpur. The study was undertaken with an aim of species differentiation from the guard hair of domestic as well as wild animals. The hair samples were collected from a total of eight domestic animal species and six wild animal species. Six animals from each species were studied and only three animals studied from the Sambar species as only three animals from this species was reported for post-mortem to the Nagpur Veterinary College, Nagpur within the period of research.

1.1 Common Logarithm

Logarithms to the base 10 are called common logarithm. This system was first introduced by Briggs in 1615. The mathematician Napier was the inventor of logarithms and Briggs was a contemporary of Napier. From the equation 10x = N, it is evident that the common logarithm will not always be integral and that they will not always be positive.

We have

 3154 > 103 and 3154 < 104

 Hence, log10

 3154 = 3 + a fraction

 Again we have

0.067 > 10–2 and 0.067 < 10–1

 Hence, log10

 0.06 = –2 + a fraction

 = 2+ a fraction

3.1 Definition

 Let f (x) be the function of a random variable ‘x’. If there exists a number ' ' ?

 such that f(x) may be made as close to ' ' ? as we proceed to choose x close to

 a given number ‘k’, then we say that the limit of f(x) as x approaches to k, is ' ' ?

 and we write it symbolically as

 x k

 limf(x)

 ?

 ??

 Example 3.1 : We are giving some examples as below:

 Example 3.1.1 : A function f (x) may become infinite as x tends to a value ‘c’

 and we write that

 x c

 limf(x)

 ?

 ??

 Example 3.1.2 : Consider the function 1 f(x) x ? . Then we say that as x ??,

 f(x) tends to zero and write it as :

 x

 1 lim 0

8.1 Matrix

An arrangement of m×n elements into m rows and n columns is called a matrix. A matrix is a rectangular array of numbers usually represented by enclosing the array in brackets.

Order of a Matrix : The number of rows and columns is called the ‘dimension’ or ‘order’ of the matrix.

 

21.1 Cost Principle

 We know that

 TC = VC + FC

 and Net Revenue = TR-TC.

In the short run, gross revenue (G.R.) must cover the V.C. The maximum net revenue is obtained when MC = M.R. If GRs VC, the guiding principle should be to keep increasing production as long as MR > M.C. In the short run, MC = MR point may be at a level of input use that may involve a loss instead of profit. Yet at this point, the loss will be minimised.This situation of operating the farm when MR > AVC but

 

 

Plant Pathogen

Pathogen is an inducer of disease.

A pathogen can therefore be defined as any factor that induces unresolved impairment or disruption of one or more important plant functions.

Some plant functions such as nutrient uptake, are highly localized. Others, such as respiration, occur in all living tissues. Still others, such as photosynthesis and photorespiration, are extensively coordinated. Pathogen effects therefore range from very local to very general.

Plant diseases are a recurring threat. Everywhere they appear in a certain cycle. Chains of infection (pathogenesis) initiated by primary inoculums comes spontaneously at the end of the harvest season or at host death due to the production of various types of pathogenic reproductive organs/propagules. These propagules must find ways to bridge the gap between harvest times to ensure continuity of infection. Therefore, plant pathogen survival is a critical step in a successful pathogen disease cycle. Pathogen spread is another important phenomenon in plant disease recurrence and epidemiology. Effective spread/diffusion of virulent propagules is critical for initiation of chains of infection and further progression of the disease in time and space.

Disease development depends on three factors: host, pathogen, and environment.

Host must be susceptible.

The pathogen must be virulent to cause disease.

The environment must be conducive to disease development.

Role of environment on disease development 

Environment

 

 

Genetic variations

Genetic variation is the presence of differences in gene sequences between individual organisms of a species.

Enables natural selection, one of the major forces driving the evolution of life.

When an individual’s offspring exhibit mutations in the traits of their parents, such offspring are called variants.

Introduction

Nanoparticles are minute particles with at least one dimension that measures less than 100 nanometers. They have been extensively studied in various f ields including medicine, biology, chemistry, physics, engineering, and environmental science. Nanoparticles have several unique properties, such as a high surface area to volume ratio, enhanced reactivity, and optical, electrical, and magnetic properties that differ from the bulk material. These properties make nanoparticles suitable for a variety of biomedical applications, including diagnosis, imaging, drug delivery, and therapy. This chapter will discuss the current and potential applications of nanoparticles in healthcare and research.

Background and Technology Intervention

Owing to the subsequent monsoon failures and unavailability of water for irrigation, Tamil Nadu farmers have switched over to drip irrigation which is not only saving huge quantity of water for them, but also preventing irrigation run off and providing deep water percolation. In Tamil Nadu, usage of drip irrigation is prevalent among vegetable and fruit growers and organic farmers.

To relieve the plants from stress or strain of water logging and water scarcity, Tamil Nadu Horticulture Development Agency has played a key role by rightly intervening the farmers through drip irrigation technology and thereby improving water use efficiency.

Background and Technology intervention

Instead of open channel irrigation, intervention of PVC pipeline system using gravitational hydraulic pressure can convey efficient water without the use of power. This will reduce conveyance loss and improve timely and equitable distribution of water to all farmers. As large number of open wells with pump sets are available, uninterrupted power supply is not available for on time irrigation during summer seasons. During such times, savings from tank water will be more helpful allowing the farmer to manage groundwater greatly.

Introduction

Energy Consumption is considered as the energy used to do any task in any kind of a simple domestic building to a complicated manufacturing industry. For instance, in a household, energy is consumed in the form of electricity used to run an Air Conditioner to make a room cool, gas used to cook a dish etc. In a car industry, energy is consumed in the form of electricity to manufacture a car part. In the transport sector, petrol or diesel or gasoline is used as a run a car or bike or other vehicles.

Types of Biomedical Waste

1. Infectious waste: waste contaminated with blood and other bodily fluids (e.g. from discarded diagnostic samples), cultures and stocks of infectious agents from laboratory work (e.g. waste from autopsies and infected animals from laboratories), or waste from patients with infections (e.g. swabs, bandages and disposable medical devices)

2. Pathological waste: human tissues, organs or fluids, body parts and contaminated animal dead bodies

An emerging, promising, affordable, and sustainable method of providing micronutrients to a large population with limited access to varied meals and other micronutrient therapies is referred to as biofortification. The biofortified tuber crops, particularly sweet potato, cassava, yam, and taro, are giving the targeted people adequate amount of nutrients. When genetic diversity is present in a gene pool of targeted crop, biofortification through conventional breeding approaches has been most successful. The breeding strategies used to elevate micronutrients include pre-breeding, large-scale germplasm screening, molecular marker development and understanding genetic control and Genotype x Environment interaction (GxE).

Insects generally reproduce by laying eggs or ‘ova’. The initiation of growth inside an egg, which in most cases is preceded by fertilization, leads to a long series of changes, finally attaining the adult stage and in due course to sexual maturity and finally to reproduction of a new generation. This chain of events from the egg stage to adult constitutes the ‘life history’ or ‘life cycle’ of an insect.

17.1 Introduction

The plant layout needs a proper arrangement of each constituent area, along with their interrelationship. One of the most important considerations is the future expansion potential. The plant layout design should permit expansion readily and economically. One side of the building should be free of permanent installations such as compressors, septic tanks, toilets, drain fields, offices, and loading docks to permit the addition of building units without relocating these auxiliary facilities.

Introduction There are multiple methods or trapping technologies available for pest management in agriculture. Some of the method discussed in literature are described here. Insect pests in an agricultural field can cause damage to the crops by infecting the crops with diseases and thus may affect adverse impact on its quality. Nowadays, farmers set up insect traps like sticky papers that comes in different colours such as yellow, green and blue to monitor the number of pests. Different insects are specifically/ particularly attracted to the colours of the sticky paper commonly such as yellow or blue (Espinoza et al?, 2016).

Introduction

In the relentless battle against crop weeds, farmers have traditionally relied on chemical herbicides and labour-intensive mechanical methods. However, concerns about environmental impact and herbicide resistance have driven the search for more sustainable and eco-friendly alternatives. One such solution is biological control, harnessing the power of predatory insects to manage weed populations naturally. This chapter delves into the fascinating world of biological control, exploring the key concepts, benefits, and implementation strategies of using predatory insects to combat crop weeds.

Introduction

Chemical communication between plants and insects is an essential part of mutual relationships, in which both partners benefit from the communication. The role of volatiles in pollination systems provides an excellent model for understanding the ecology and evolution of chemical communication between plants and insects. Infochemical:- A chemical that conveys information in an interaction between two individuals evoking in the receiver a behaviour or physiological response. Chemicals involved in interspecific communications were given the name of Allelochemicals by R. H. Whittaker in 1970. Allelochemicals affect the survival, growth & development of herbivorous insects as well as their natural enemies.

Introduction

The challenge for all disciplines of agriculture is to increases production and improves quality of agricultural produce. This is applicable to the discipline of plant protection and manage risk. In the past many pathogens are responsible for food scarcities including famines. In addition to endemic problems there are many crop pests which are entered India from other foreign countries because in India did not have an effective control measure (plant quarantine) system to stop the introduction of exotic pests, diseases and weeds. Cottony cushion scale, woolly aphid, San Jose scale, golden cyst nematode of potatoes are some exotic pests introduced into our country and cause extensive damage.

History

 • The fossil evidence also indicates the presence of plant diseases 250million years ago.

 • The diseases caused by fungi and nematodes were discovered by Monocernin 1735.

 • Johan Needham (1743) identified wheat gall caused by a nematode.

 • Adolf Mayer (1886), demonstrated the transmission of Tobacco mosaicvirus (TMV).

 • EF Smith (1890) described bacterial wilt in cucurbits.

• The thrips (Thysanoptera) as vectors of plant viruses were identified thescientific studies made by Samuel and his team.

 • Karl Maramorosch (1952) demonstrated the multiplication of Asteryellows virus (AYV) in leafhopper vector.

 • The mite Aceriatulipae has been identified as a vector of Wheat streakmosaic virus by JT Slykhuis in 1955.

 • The term “viroid” (viruses without protein coat) was coined by TO Dienerduring 1971.

Discrete Cell Tumours

(Round / discrete / distinctive / unique cell tumours)

General Features

• Exfoliate many cells
• Cells often quite small to medium sized
• Discrete cells
• Do not stick together
• If the smear is very cellular, cells are packed close together in sheets
• However, these cells are not adherent to one another
• There are sharp, crisp cytoplasmic margins between cells

Editing

Editing is the process of refining the content, structure, grammar, and presentation of a written work. Editing is done to make sure that your thoughts are communicated to the reader as clearly as possible.

It takes more than just changing a word, adding a comma here and there, and fixing spelling errors to edit a tale. The procedures below must be followed in order to edit effectively.

1. Read the story from beginning to end first. The writer’s intent will become clearer to you at this point. Then check to see if it addresses the following queries: what? Why? Where? When? Who? and how - regarding the topic.

2. Make your notes in the margin while keeping these inquiries in mind.

3. Next, consider the general level of education and comprehension of your magazine or letter’s readers. Make a note of every word you believe they won’t comprehend.

4. Next, determine how long the story should be. What room in your magazine can you offer it? It is preferable to rewrite the story rather than attempt to condense it by omitting some details if you need a very brief copy.

5. Verify that the information is logically ordered and, if a process story, that the directions are comprehensive and given in the right sequence.

4.1 The Meaning of Journalism

The profession and practice of journalism entail gathering, confirming, analysing, and distributing news and information to the general public. Reporters, often known as journalists, are essential to the accurate, timely, and insightful coverage of events, problems, and advancements that have an impact on society. They are responsible for presenting the facts, providing diverse viewpoints, and conveying information in a clear, objective, and ethical manner.

6.1 Role of Media in Democracy: Introduction

The media is the fourth pillar of democracy. The media has a critical role in creating a democratic culture that transcends the political system and gradually enters the general public's consciousness. Voters rely on the political information provided by the media to make their selections. They facilitate discussion and help discover issues facing our society.

Since the Green Revolution of 1960s, Indian agriculture have been highly dependent on chemical fertilizers, exploitation of ground water for irrigation, intensive tillage etc. to raise the food grain production of the country towards ensuring food security for all. The consequences of these practices resulted in declined and degraded soil health, soil erosion and dried up water capillaries - ultimately posing threat to the sustainability of the future production. This invites the need of affordable changes in the agricultural practices without hampering the production. Conservation Agriculture, as put forward by FAO, is a set of sustainable agricultural practices, aims to conserve, improve and make efficient use of natural resources through management of soil, water and biological resources in aid with external inputs. The three basic principles of Conservation Agriculture include - minimum soil disturbances, permanent soil cover and crop rotation or crop diversification.

In any scientific investigation and research, a comprehensive review of literature is very essential. Its main function, apart from determining the work done before concerning the problem area i.e., area of investigation, to provide an insight into the methods and procedures and create a basis for interpretation of findings. As direct references of all the items are not in abundance, certain specific references along with some indirect references have been incorporated in this chapter for the purpose of meaningful use. In the present study, reviews of literature have been summarized in the following table

4.1 Research Setting

In any social science research, it is hardly possible to conceptualize and perceive the data and interpret the data more accurately until and unless a clear understanding of the characteristics in the area and attitude or the behavior of people is at commend of the interpreter who intends to unveil an understanding of the implication and behavioral complexes of the individual who live in the area under reference and form a representative part of the larger community. The socio-demographic background of the local people in a rural setting has been critically administered in this section. A research setting is a surrounding in which input and elements of research are contextually imbibed, interactive and mutually contributive to the system performance. Research setting is immensely important in the sense because it is characterizing and influencing the interplays of different factors and components.