eChapters

Jammu division with three agro-climatic zones viz., sub-tropical, intermediate (low hills) and temperate (Fig. 1) has vast potential for horticultural industry by way of improving the productivity of existing orchards and using vast tracts of underutilized wastelands, kandi areas of sub-tropical zone and hilly areas of intermediate and temperate zones for fruit production. For this, there is need for plantation of suitable varieties, budded/grafted on proper rootstock and following of improved orchard management practices viz., training and pruning, nutrient and water management and pest and disease control. At present, fruits occupy an area of 118805.00 ha with the production of 274006.70 MT and productivity of 2.31 MT/ha in Jammu division.

Sub-tropical zone

It comprises both irrigated and unirrigated areas and goes upto an attitude of 500 m above mean sea level. This zone is characterized by hot summers and relatively dry but pronounced winters. The land is suitable for cultivation of mango, citrus crops (sweet orange, mandarin particularly kinnow, lime, lemon), guava, litchi, ber, papaya and other minor fruits. Some low chill varieties of temperate fruits like peach, plum, pear and strawberry have been introduced at Advanced Centre for Horticulture Research (ACHR) of SKUAST-J, Udheywalla and peach cultivars Shan-e-Punjab, Flordasun and Flordared and pear cultivars Patharnakh and LeConte have shown good yield and quality crop. Besides, strawberry cultivars Chandler, Gorella, Fern and Belrubi have also shown promising yield with proper management practices. For rainfed areas, hardy fruits like aonla, phalsa, ber, guava, lasoda, karonda and custard apple are more suitable with aonla, phalsa and ber being commercially more viable.

Guava (Psidium guajava), the apple of tropics, is one of the most common fruits in India. It is the fourth most important fruit in area and production after mango, banana and citrus. Being hardy, it gives assured crop even with little care, and is good for rainfed areas also. This fruit is popularly being grown in sub-tropical regions of Jammu on 2480 ha with annual production of 9153 MT.

Climate and Soil

Guava is successfully grown under tropical and sub-tropical climate. In areas with distinct winter season, the yield tends to increase and quality improves. It can be grown upto an altitude of 1515 m above mean sea level. Older plants can tolerate drought. High temperature at the time of fruit development can cause fruit drop.

Guava trees are very hardy and can thrive on all types of soils, but are sensitive to water logging. The best soils are deep, loamy and well drained.

Walnuts (Juglans regia L.) are found in the northern parts of the country in temperate belts. They are grown in the length and breadth of the valley in Jammu and Kashmir and hilly areas of Jammu. The walnut is being cultivated in the state on 89,339 ha with an annual production of about 2,66,280 metric tonnes. In Jammu Division, walnut plantation is on 38,318 ha with an annual production of 92,227 metric tonnes. The walnut is very rich in proteins, fats and minerals and is a concerned source of energy.

Climate and Soil

Walnuts are found growing in all parts of the Himalayan region between the elevation of 1200 to 2100 m above mean sea level. Walnuts are sensitive to both low and high temperature. Climate should be free from frost in spring and from extreme heat in summer. They grow well in areas where rainfall is about 75 cm or more and is well distributed. Temperature of 29-32^oC near harvest time, results in well-filled kernels.

Walnuts do best in soils where roots can penetrate deep evenly. In addition to good top soil, sub-soil must be free of rock, impervious clay or layers of gravel. Most suitable soil is well drained silt loam with abundant organic matter. Alkaline soil and sandy soils should be avoided for walnut growing. A soil with 2-3 metres depth and pH range of 6-7 gives best results.

R - Enamel can: The acid resistant, gold coloured enamel treated can are called R enamel cans. It is used for canning of acidic food which have soluble colouring pigments.

R value: R value is a measure of resistance to the flow of heat through a given thickness of a material (insulation) with higher numbers indicating better insulating properties.

Rabbitto and putridity: The surface taint of the milk caused by Pseudomonas putrefaciens is called rabbitto and putridity.

Racking: An important operation for the wine production in which wine is siphoned off and is transferred to a fresh vat with the help of a false bottom. Racking is repeated decanting to remove the slowly setting cloud of the freshly fermented young wine. It is also called clarification. It is synonym to siphoning.

Rad: It is the unit of radiation dose being equivalent to the absorption of 100 erg/g of irradiated material.

Radappertization: It means complete sterilization of foods by using irradiation. It is equivalent to commercial sterility. High dose of the radiation (25-45 kGy) is required for killing all microbes.

SOURCES OF LOSSES
In most of the cases of excessive fat or product loss, a combination of several factors rather than any single factor are responsible.
 
Inaccuracy in weighing: Receiving room scales should be checked regularly with a set of weights. The check should be made immediately before weighing operations begin. Improper drainage of the weighbowl will permit a carry over into the next batch dumped, resulting in incorrect weighing. Errors in weight in bulk handling methods may be caused also by improper leveling of the tank, incorrect calibration of the measuring rod, or carelessness on the part of the person taking the measurement.
 
Inaccuracy in sampling: Failure to collect representative samples may sometime cause sizeable losses. Milk should be properly agitated before taking samples. The composite sample should be preserved and refrigerated and should be protected from mould growth.

Importance and Value of Human Resources

The employees are the human resources of an organization which are crucial for its functioning. The acquisition of human resources and their maintenance involves costs. Manpower costs include costs of research and designing of manpower programmes that is man-power planning, work study and designing of personnel policies etc. The costs of commissioning of man power, that is, costs of recruitment, induction, placement and training etc. The cost of maintenance of these resources is a very significant component of the total costs of an organization. Maintenance costs include wages and salaries, welfare and medical benefits, PF, gratuity and other retiring benefits etc. These costs form a substantial part of the total costs of an organization. In the last 30 years the treatment of manpower costs has been recognized as a separate division in accounting practices. The other assets like machinery, buildings etc come under depreciation. In contrast, human assets are the employees at all levels, as they grow in age and experience, add to their productivity and capacity to earn for the organization and become more valuable.

RECRUITMENT 
Recruitment is the process of identifying the prospective employees, stimulating and encouraging them to apply for a particular job or jobs in an organization. It is a positive action as it involves inviting people to apply. The purpose is to have an inventory of eligible persons from amongst whom proper selection of the most suitable person can be made.

The Process of Recruitment
Before thinking of inviting people to apply for a job one has to decide what types of persons are to be invited and what their characteristics should be. This calls for fixing the ‘job specifications’ which may also be called ‘man specifications’. Job specifications are based on job description which is dependent upon the nature and requirements of a job. 

Thus, job specification will be different for each job. The various elements of job specification are:

The machine parts, which have relative motion, rub against each other. The rubbing surfaces are never perfectly smooth, even when they are highly polished. If they are observed under a microscope, one sees small depressions and elevations which get interlocked when the machine parts are under pressure, and give rise to a resisting force called frictional force. Due to friction, the parts get worn out and become useless. Friction produces heat, which, in this case, represents loss of work. To reduce this wear and loss of power caused by friction, certain foreign substances are introduced between the rubbing surfaces which keep them apart. These substances are called lubricants; and lubrication is the science of reducing friction by the application of a suitable substance between the rubbing surfaces of bodies having relative motion.

DAIRY BUSINESS

Most ambitious young men at some time or another are likely to develop an interest in going into business for themselves. This is prompted not only by the thought that a person owning his own business is more independent but also by the hope of increasing personal income. However, when these same young men look about them and see the general existence of “big business” in practically all lines of endeavour, they often lose courage and decide to remain as workers with some company where they can enjoy a certain degree of security. 
The general condition is an important factor in determining the success of new business enterprises. Similarly, innovations like the creation of new products or the development of new methods of merchandising often gives rise to opportunities for a new business enterprise. The introduction of “Softy” ice cream and other soft-served frozen products made it possible for several hundred small businesses to get established in our country. The advent of single- service paper container was the spark that started several milk-plant operations which later grew into companies of considerable size. Ironically, the paper milk container also spelled the doom for many older independent plants that could not or did not adjust soon enough to this new way of packaging. The chocolate-coated ice-cream bar idea started a number of new enterprises which grew from small companies going to concerns of considerable size. Vending machines made it possible for many small companies to get started selling milk, ice cream, candy and lassi etc. 

Introduction

Dairy is vital to the economics of many developing countries. Animals are a source of food, more specifically protein for human diets, income, employment and possibly foreign exchange. For low income producers, dairy can serve as a store of wealth; provide draught power and organic fertilizer for crop production and a means of transport. Consumption of dairy and dairy products in developing countries, though starting from a low base, is growing rapidly. Dairying has become an important secondary source of income for millions of rural families and has assumed a most important role in providing employment and income generating opportunity. Indian Dairying is unique in more than one ways. It ranks first with its 199.1 million cattle & 105.3 million buffaloes accounting for about 51 percent of Asia’s and about 19 per cent of world’s bovine population. It also ranks first in milk production with a production of 121.8 million tones in 2010-11 and the demand is expected to be 180 million tones by 2020. To achieve this demand annual growth rate in milk production has to be increased from the present 2.5 % to 5%. Thus, there is a tremendous scope/potential for increasing the milk production through profitable dairy farming. Besides milk, the manure from animals provides a good source of organic matter for improving soil fertility and crop yields.

Model Project for Setting Up 10 & 20 Cow Dairy Farm (Indicative)

    ·    The models are only indicative and in no way designed to provide exact economics. Following guidelines may be used by the interested persons to work out the details of their project, depending upon the local market and conditions.

    ·    An interactive module considering the land availability for fodder cultivation, willingness to opt for silage bunkers, type of chaff cutter (manual or machine operated), milking machine, mister set, etc. is under preparation.

    ·    The proposed interactive module would require preference for set of inputs and intended herd size and accordingly generate output outlining the estimated investment, cost and return.

The degree of excellence in regard to the physical and genetical characterstics of seeds is called as Seed quality. Seed lots having high genetic purity and high germination percentage and minimum inert, weed and other crop seed and are free from diseases and pest attack, it is said to be a high quality seeds. If it is lacking in any of these qualities, it is said to be low quality seed lots. Only good quality seeds expected to respond well for fertilizers and other inputs used.
 
Viability: It is the ability of embryo to live, grow and develop into a seedling under favorable conditions. The seeds attained maximum viability at physiological maturity stage. Later on seeds start to loss viability.

Seed multiplication and production was controlled by a legally sanctioned system called Seed Certification. Seed certification procedures and designed to ensure physical and genetic purity, freedom from weed seeds and diseases and good germinability of the certified seed. Seed certification is done by the Seed Certification Agency (SSCA) of the concerned state or by NSC.
 
Objectives of Seed Certification

The objective of seed certification programme was formulated by Douglas, 1971
 
i)    to ensure genuineness and quality of seed.
ii)    The identification and their rapid increase of new varieties under accepted names.
iii)    The systematic increase of superior varieties
iv)    Continuing supply of quality material and their maintenance.

Inorganic pest management systems using external inputs such as chemical fertilizers, pesticides, high yielding varieties have resulted in increased yields in certain areas, but resulted in ecological degradation hence a decrease in productivity. Under organic farming systems, the fundamental components and natural processes of ecosystems, such as soil organism activities, nutrient cycling, and species distribution and competition are used to work directly and indirectly as farm management tools. For example, crops are rotated, planting and harvesting dates are carefully planned, and habitat that supplies resources for beneficial organisms are provided. Soil fertility and crop nutrients are managed through tillage and cultivation practices, crop rotations, cover crops, and supplemented with manure, composts, crop waste material and allowed substances.
 
Bio intensive IPM incorporates ecological and economic factors into agricultural system design and decision making and addresses public concerns about environmental quality and food safety. The benefits of implementing bio intensive IPM can include reduced chemical input costs, reduced on-farm and off-farm environmental impacts, and more effective and sustainable pest management. An ecology-based IPM has the potential of decreasing inputs of fuel, machinery, and synthetic chemicals—all of which are energy intensive and increasingly costly in terms of financial and environmental impact. Such reductions will benefit the grower and society.

• What is Intelligence?
• What is Artificial Intelligence?
• Branches of AI
• Natural–Language
• Natural Language Processing 
• Natural Language Recognition
• Simple Natural Language Grammar
• Intelligent Technologies in Agriculture
• Intelligent Animal Houses
• Agricultural Robots

Agroforestry systems essentially involve a perennial component and provide cover to the soil through litter fall and tree canopy, which contribute to the conservation of soil and water resources in arid and semi-arid areas. Moreover, arid and semi-arid areas are exposed to extensive soil erosion by wind and water, respectively.  Planting of trees on erosion control structures as windbreaks, boundary plantations and tree-based systems are some of the potential ways for conserving natural resources (Singh, 2003).  Agroforestry and soil conservation have major role to play in the context of global climate change likely to occur from extremes of weather events and erratic rainfall behaviour.
 
    •    Provide  permanent vegetative cover to the soil or land surface and thus substantially control erosion caused by both runoff and wind.

    •    Improve soil quality through increased soil organic matter addition from litter fall and root turnover; and  improved  environment for soil microbe and earthworm activity. 

Abstract: This chapter reports soil and nutrient loss due to water erosion from five major land uses, i.e. vegetable fields, coconut plantation, arecanut plantation, home garden and moist evergreen forest on the undulating topography of the island. Soil loss under the land uses was quantified using replicated runoff plots. Vegetative methods, i e Gliricidia hedgerow + crop, hedgerow + mulch + crop, hedgerow + mulch + crop + grass barrier, for vegetable field under till conditions, and Pueraria cover crop (coconut + Pueraria phaseoloides  cover crop) for coconut plantation were tested to know their potential to arrest soil erosion in the respective system. Soil loss from the vegetable field under No till conditions, coconut plantation, arecanut plantation, home garden and forest was 3.8, 12.4, 10.6, 8.4 and 2.3 tonnes/ha, respectively. Soil working in vegetable fields (till + crop treatment) provoked soil loss to124 tonnes / ha. Erodibility was the lowest (0.06) in the forest and highest (0.26) in the vegetable field under till condition.  Among the nutrients, the highest loss, across the treatments, occurred for nitrogen and lowest for phosphorus. The hedgerow alone in vegetable fields reduced the soil loss substantially (66 %). However, it together with mulch and grass barrier reduced the soil loss nearly equal to that found in the forest. Like wise, Pueraria cover crop (19 years old) brought down the soil loss under the coconut plantation equal to that in the forest. These observations suggest that Gliricidia hedgerows for vegetable cultivation and cover crop for coconut plantation may be good vegetative methods for soil erosion control in the island.

ABSTRACT
There is a quantum global growth in both number and size of dairy industries in recent times. These industries discharge thousands of liters of wastewater characterised by a heavy chemical oxygen demand (COD), biological oxygen demand (BOD), nutrients, inorganic salts, besides detergents and sanitisers each day (Kushwaha et al., 2011). High carbohydrates, fats and proteins contents in such waste streams originating from milk pose challenge to conventional municipal sewage treatment systems (Demirel et al., 2005). The easily biodegradable dairy effluent leads to precipitation of casein which is toxic and has a strong odour. Without adequate treatment, these effluents could pose serious threats to the receiving water bodies and disturb the ecosystem (Satpathy et al., 2017). For such heavily loaded organic effluents, biogasification through anaerobic digestion seems a promising strategy. This cost-effective energy generation process is also effective in environmental management compared to its other eco-friendly renewable source counterparts, such as, hydro, solar and wind (Satpathy, 2017). The Upflow Anaerobic Sludge Blanket (UASB) reactors are the most popular anaerobic systems to treat the fluctuating organic loads in dairy effluents. Anaerobic filter (AF), Upflow Anaerobic Filter (UPAF), Fixed-bed anaerobic reactor, Anaerobic Hybrid Reactor (AHR) etc. are few other systems that are demonstrably competent removing COD upto 90% and generating biogas. Successful anaerobic systems reported yielded (with upto about 85% CH₄ content) 0.32-0.34m3 CH₄/kg COD removed. Biomethanation process and reactors designs are constantly being optimised for effective treatment of the effluents while maximising the biogas production. The energy-rich gas thus obtained could further be utilised for heat and electricity at the domestic level, and also as a vehicular fuel. Residual digestate can also be used as organic manures (Angelidaki et al., 2007).

ABSTRACT
Nisargruna biogas technology has been developed in BARC for processing different types of biodegradable waste. This technology is based on biphasic separation of aerobic and anaerobic stages. Introduction of aerobic predigester has increased the efficiency of the process in terms of enhancing the quality and quantity of methane and also reducing the retention time of the process. Process parameters of the plant were studied and found that the modified design has proved very effective in faster digestion of complex waste. The technology has been commercialised and has spread across different parts of country for processing variety of wastes including kitchen waste, municipal waste, agriculture waste, textile waste and poultry waste. Microbial population from different stages of the plant was also studied and found their ability to convert waste to biogas, containing mainly methane.

Keywords: biogas, biphasic digestion, green energy, methane, microbial fermentation, Nisargruna, waste management

3.1 Selection of Breeding Bulls

A sire is called half the herd and the breeding bulls to be used for semen production should be carefully selected. Selection of superior sire for breeding purpose is very important for the success any livestock breeding programme. Therefore, breeding sire must be carefully selected and maintained in scientific way so that its breeding life is prolonged and maximum number of frozen semen doses can be produced from it. 
The selection criteria for future bulls should be meticulously designed keeping into account all the factors/parameters which affects the breeding programme. The selection of breeding bulls is based on three broad parameters-

3.1.1 Pedigree Examination
3.1.2 Gross Physical Examination
3.1.3 Laboratory Examination

Semen metabolic activity can be assessed with the help of the following tests:
    
15.1    Incubation test
    
15.2    Methylene Blue Reduction Test
    
15.3    Resazurine Reduction Test
    
15.4    Millovonoo’s Resistance Test (‘r’ test)
    
15.5    Fructolysis Index
    
15.6    Oxygen utilization test
    
15.7     Glutamic oxaloacetic transaminase activity

15.1 Incubation Test

The longevity and viability of spermatozoa during storage is a good index of fertilizing ability of sperm. In this test assessment of motility is carried out over a period time to obtain an idea about the length of time over which acceptable level of motility is maintained in the semen sample. Therefore, this test serves as a mean of determining storage probability within a fairly short period of time.

21.1 Liquid Nitrogen Container/ Cryocan

To store liquid nitrogen a special type of container is used and is known as a LIQUID NITROGEN CONTAI NER OR CRYOCAN. Frozen semen doses are always preserved in liquid nitrogen which is an inert liquid having a boiling point of -1960C and a freezing point of -212°C. Liquid Nitrogen Containers are doubled walled metal (Stainless Steel/Aluminium) vacuum vessels with a very efficient insulation system. Due to highly efficient insulation system the temperature inside the container can remain -196 oC as long as atleast two inches of Liquid Nitrogen is present in the container. It has got an inner chamber which is suspended in outer chamber through neck tube which is a non metal and bad conductor of heat. Walls of the inner chamber are coated with a high quality of insulation material. The space between the inner and outer chamber is also filled with high quality insulation material. Vacuum is created in between inner and outer chamber. Loss of vacuum will lead to the boiling of the liquid nitrogen gas and hence rapid loss of this gas from the inner chamber.

Significant advancement in high throughput technologies (microarrays, automated sequencing and mass spectrometry), transcriptomics, the global study of transcription, together with genomics and proteomics, has undoubtedly contributed to a systems biology approach. These technologies have generated vast amount of sequence data from plants, animals and microorganisms. Fortunately, efficient computational tools (intelligent data networks, query, retrieval, analysis and visualization tools) have now optimized data mining, accelerating the process of discovery. The analysis of sequence variation is of major importance in genetic studies. In this context, molecular markers represent one of the most powerful tools for the analysis of variations in the genome and the association of heritable traits with underlying genetic variation. The development of high-throughput methods for the detection of simple sequence repeats (SSRs) and single nucleotide polymorphisms (SNPs) has led to a revolution in their use as molecular markers. The availability of large sequence data sets permits mining for these molecular markers, which may then be used for numerous applications such as genetic mapping, association mapping, evolutionary and phylogenic studies.

Introduction

The branch of science that deals with resolving the evolutionary relationships among organisms is phylogenetics. Phylogeny is the description of biological relationships, usually expressed as a tree. A statement of phylogeny among objects assumes homology and depends on classification. Phylogeny states a topology of the relationships based on classification according to similarity of one or more sets of characters, or on a model of evolutionary processes. In many cases, phylogenetic relationships based on different characters are consistent, and support one another. If different characters induce inconsistent phylogenetic relationships, they all are dubious. Conversely, note that the same similarity data may be consistent with different possible topologies or trees.
 
Molecular approaches to phylogeny developed against a background of traditional taxonomy, based on a variety of morphological characters, embryology, and from fossils, information about the geological context (stratigraphy).

Introduction

Natural evolution gifted the biological world a treasure of diverse bio-molecules that take part in various cellular activities. Proteins, one of the vital molecules of biological function are wisely folded polymers comprising 20 different aminoacids. Function of each protein is encoded in its aminoacid sequence. Aminoacid residues can indulge in bonded or non-bonded interactions depending on the environment. These inter residue interactions with in a polypeptide drive its folding in to a compact conformation from a linear molecule. Biochemical properties as well as the linear arrangement of the aminoacids determines the three dimensional structure of a protein. These determinants of defined structure directly or indirectly dictates functional fate of the folded protein also.

10.1    Respiration
    
10.2    Effect of Ethylene on Ripening
    
10.3    Transpiration Loss
    
10.4    Postharvest Biochemistry of Banana
    
10.5    Postharvest Pathology of Banana

11.1    Maturity Indices
    
11.2    Harvesting and Field Handling
    
11.3    Packhouse Operations
    
11.4    Packaging
    
11.5    Precooling

Plant propagation: Plant propagation means multiplication of plant by sexual or asexual method.

There are two type of plant propagation

1.    Sexual propagation

2.    Asexual propagation 

A. Sexual propagation: Sexual propagation means multiplication of the plant by seed. It is also known as seed propagation.

Advantages of sexual propagation

1.    This is the easier and cheaper method.

2.    Some of the plant does not response well by asexual method (Papaya) this type of plant only propagated by sexual propagation.

3.    Sexually raised plant are long lived have extensive root system and bear heavily as compare to asexually propagated plants.

4.    Hybrid can develop only by seed propagation.

5.    Seed can be store for longer duration.

Growth, Fruiting Habits and Methods for Inducing Fruitfulness in Fruit Crops

•    Every plant has two distinct phases of development namely vegetative and reproductive.

•    In the vegetative phase, the plant only vegetative growth i.e. leaves, shoots etc.,

•    In the reproductive phases the plant produces reproductive growth i.e. flowers and fruits.

•    In case of annuals, these phases occur for a short period, each phase occurring only once and that too within the same season.

•    In perennials, the vegetative phase lasts for several years depending upon the variety and species. This is known as the pre-bearing period.

•    Once the perennial tree completes its pre-bearing period, the cycle of vegetative and reproductive phases might occur in each season or the reproductive phase may occur simultaneously along with vegetative phase without much distinction between the two.

Importance of Post Harvest Technology

1.     Proper handling, packaging, transportation and storage reduce the post harvest losses of fruit and vegetables. For every one percent reduction in loss will save 5 million tons of fruit and vegetable per year.

2.     Processing and preservation technology helps to save excess fruit and vegetable during the glut season (off season).

3.     The technology has become a necessity to improve the food safety and strengthen nation’s food security.

4.     The technology helps to boost export of agricultural commodities in the form of preserved and value added products.

5.     Presently mango, pineapple, citrus, grapes, tomatoes, peas, potato and cucumber being processed on a large scale.

Origin and history: Mango is the king of fruits which is grown in India for over 400 years. More than 1000 varieties exist today. It grown in almost all state, India’s share is about 56% of total mango production in the world. Its production has been increasing since independent contributing 39.5% of total fruit production in India. Andhra Pradesh top in the production and Uttar Pradesh is top in area. Andhra Pradesh, Bihar, Uttar Pradesh, Karnataka, West Bengal and Gujarat together contribute for about 82% of total production. 

Climate and Soil: Mango thrives well in tropical and subtropical climate. High humidity, rainfall and frost during the flowering period is harmful. The favourable temperature for its cultivation is about 24-27^ºC however, it can tolerant to the temperature up to 48^ºC.

Introduction: Grape is an important sub-tropical fruit crop in India. The plant of Vitaceae family divided into two important groups first is Euvitis which have 60 species; some important species which are commercially grown are i.e. Vitis vinifera, Vitis raperia, Vitis rupestris, Vitis labrausca and Vitis champini. Second group is Muscadiana and in this group the important crops are Muscadiana rotendifolia, Muscadiana popenoii and Muscadiana munsoniana. The chromosome number of this group is 2n = 40.

Origin and history : Banana is an important fruit of tropics. The fruit is recognized as the fourth most important global food commodity. India’s share is 32 per cent of the total fruit production. This is the only tropical fruit which is exported in large quantities and is leading fruit in the international trade. It is one of the oldest and commonest of the Indian fruit that has been cultivated since ancient times. Eve was said to have used banana leaves to covers her modesty in the garden of paradise. Banana is thus called apple of paradise. It is also known as “Adam’s fig or tree of wisdom”. It is used as staple fruit in most of the African countries and is used as ripe (table) or raw fruit (cooking). This fruit is available throughout the year. All the plant parts are being used. Banana is monocotyledonous plant true stem is rhizome which is a modified form of stem fruit is seedless due to parthenocarpy and the development of fruit is due to auxin stimulation. India has more than 300 germplasms, out of 600 reported worldwide. Edible banana has arisen as a result of natural crosses between two wild progenitors viz,. Musa paradisiaca and Musa balbisiana. Banana is being grown in many of the African countries between 300 N and 500 S latitudes. Important countries are India (1st place).

Origin and history: Citrus is the leading fruit crop in the world. In India, citrus ranks second in area sharing 12.8% of the total area under fruit crops with 9.6% share in production. Under citrus group, mandarins are the most important, occupying 50% of the total area under citrus followed by sweet orange and limes. Citrus fruits are grown mainly in Maharashtra, Andhra Pradesh, Punjab, Karnataka and North-Eastern region. 

1.    Nagpur mandarin was introduced in India in 1894 by Shriji Raja Bhosle. 

2.    Kinnow can be grown in high density planting by using the cultivar  Troyer Citrange'  as a root stock by spacing the plants at 1.8 x 1.8 m2. 

3.    Classification of citrus was given by Tanaka and Swingle. 

4.    Grape fruit is also known as Forbidden fruit, Breakfast food.

1.    Major Branches of Horticultural Science

    
2.    Potential Production Zones of Various Horticultural Crops in India
    
3.    Indian Horticulture
    
4.    Current Production and Projected Demand of  Horticultural Products
    
5.    Extent of Value Addition in Fruits and Vegetables
    
6.    Horticulture as Profession
    
7.    Projected Demand for Horticulture Professionals in 2020
    
8.    Major Career Opportunities in Horticulture
    
9.    Level of Employment (%) in Horticultural Processing Sector
    
10.    Conclusion
        
References

1.    Groups of Apomixis
    
2.    Recurrent Apomixis
    
3.    Non-recurrent Apomixis
    
4.    Vegetative Apomixis
    
5.    Genetic Control of Apomixis
    
6.    Mechanism of Apomixis
    
7.    Ovule, Seed and Fruit Development in Sexual Plants
    
8.    Double Fertilization and Control of Embryo Initiation
    
9.    Sequential Events in Apomictic Pathway
    
10.    Gametophytic Apomixis
    
11.    Significance and Scope of Apomixis in Crop Plants
        
References

1.    Basic Principles
    
2.    Scale and Proportion
    
3.    Balance
    
4.    Rhythm
    
5.    Simplicity
    
6.    Unity
    
7.    Transition
    
8.    Focal Point or Emphasis
    
9.    Elements
    
10.     Variety
    
11.     Grouping
    
12.     Mass
    
13.    Sequence
        
    Further Reading

Preliminaries
    
Results on 22 Factorial Experiment
    
23 Experiment in r Replication
    
Confounding

Test for Significance for Population Mean
    
Test for Significance of Population Proportion

INTRODUCTION

For survival of young seedlings and rooting of cuttings it is essential that they maintain a healthy water and air balance especially to make up the water lost in transpiration. Water stress within the cuttings hinders metabolic activities and cell regeneration and consequently initiation of roots. So medium should be such that it provides adequate water required for rooting and growth. Also these substrates must provide initial nutrients necessary for plant growth. These should also contain micro-organisms that seedlings may need.

INTRODUCTION

The initial care of young seedlings and propagated plants is very necessary and important. Efforts should be made in such a way that the young plants can be propagated and grown to a saleable size with no insect-pests and diseases attack and nutrient deficiency. The supply of healthy plant material to the growers helps in good reputation of a nursery as well as to make fruit crops more profitable.

Sometimes young nursery plants suffers from various problems like attack of insect-pests and diseases, nutrient deficiency, scanty or excessive moisture and stagnation of excess or rain water in the field. The young seedlings/plants require light and frequent irrigation and need special care to make them grow well and to save them from adverse weather conditions. They must be protected from intense heat and cold. The young nursery plants growing on light or sandy soils can exhibit deficiency symptoms of macro and micro elements. Such nutrient deficiencies can easily be corrected by foliar or soil application of desired nutrient.

In post-harvest management of horticultural crops, post-harvest treatments play an important role in maintaining the quality and enhancing the shelf life. There are number of treatments viz non-chemical, chemical and biological treatments which are being used commercially depending on the requirement of trade. Fresh fruits are living tissues subject to continuous change after harvest. Some changes are desirable from consumer point of view but most are not. Post-harvest changes in fresh fruit cannot be stopped, but these can be slowed down within certain limits to enhance the shelf life of fruits
 
1. Low Temperature Treatment

Pre-cooling: Pre-cooling refers to the rapid removal of field heat from freshly harvested fruits in order to slow ripening and reduce the deterioration prior to storage and transportation. The major effect of pre-cooling consists in reducing respiration rate, retarding the growth of decay organisms and reduces wilting and shrivelling, since transpiration and evaporation occur more slowly at low temperature. The harvesting of many perishable crops is done at evening or early morning to avoid excessive field heat.

INTRODUCTION

As per National Horticulture Database published by National Horticulture Board, during 2014-15 India produced 89.15 million metric tonnes of fruits. This value however differs from the consumption value depending upon the post harvest losses, storage losses or transportation losses. Transportation and distribution of fruits being the most important factor, plays a key role in determining the net income from horticulture trade. It is an essential link in the modern food chain and exists as complex matrix where not only fresh goods finished products are transported but there is also transportation of bulk raw materials. Locally grown produce may be transported directly from farms to retail outlet. For local market, the produce is brought by bullock cart, tractor, trollies. Mainly the long distance transportation is by trucks, rails which is costly. In India the transportation by Railway is much less than the other means. The road transport is 3-4 times more expensive than rail, yet it is preferred for shipment of fresh fruits simply because of the faster movement of perishable commodities.

Bioinformatics is a discipline that deals with computation of biological information. Bioinformatics is a newly emerging interdisciplinary research area spanning a range of specialties that include biology, biophysics, computer science, mathematics & statistics. It makes use of scientific and technological advances in the area of computer science, information technology and communication technology to solve complex problems in life sciences particularly problem in Biotechnology.

Explosive growth in biological data from large sequencing projects that are producing nucleotide sequences continuously at a faster rate and the content of the nucleotide database is doubling in every 14 months. The latest release of Gene bank (v.102) exceeded one billion base pairs. To cope with this huge volume of data, a new scientific discipline has emerged comprising bioinformatics, biocomputing & computational biology.

Abstract

The species of liver flukes of the genus Fasciola (Platyhelminthes: Digenea: Fasciolidae)are obligate parasitic trematodes residing in the large biliary ducts of the herbivorous mammalian hosts causing fascioliasis worldwide. While Fasciola hepatica has a cosmopolitan distribution, the other major species, i.e., F. gigantica is reportedly prevalent in the tropical and subtropical regions of Africa and Asia. To determine the phylogenic location of Fasciola sp. of Assam (India) origin based on rDNA molecular data,ribosomal ITS regions were sequenced (Accession numbers- EF027103 and EF027104) and compared with other species of trematodes in the family Fasciolidae that includes, Fasciolopsis buski and Fascioloides magna besides the species of Fasciola. NCBI databases were used for sequence homology analysis using BLAST; multiple sequence alignments were performed using ClustalW program.The phylogenetic trees constructed based upon the ITS (I & II) sequences by multiple tree building methods in MEGA revealed a close relationship with isolates of F. gigantica from China, Indonesia , Japan, Egypt and Zambia, the isolate from China with significant bootstrap values being the closest. Using the novel approach of molecular morphometrics that is based on ITS2 secondary structure homologies, phylogenetic relationships 

Introduction

Agroforestry is the intentional combination of agriculture and forestry technologies to create integrated, diverse, productive, profitable, and sustainable land-use systems (Rietveld 1995). It creates complex systems with impacts ranging from the site or practice level up to the landscape and beyond (Ellis, 2004). It is one of the most conspicuous land use systems that consists of annual and perennial plants, which are often integrated with livestock. It provides ecosystem services and reduces anthropological impacts on natural forests, arrests soil degradation, enhance soil fertility in many situations and improve farm resilience (Thangataa and Hildebrand 2012; Tewari et al. 2013). Agroforestry is a land management and farming system that are not only capable of fulfilling household needs but also maintaining and improving environmental quality. Itplays a vital role in achieving integrated rural and urban development. The changing climate has potential impacts on ecosystem goods and services by means of increased variability with greater risk of extreme weather events, such as prolonged drought, storms and floods (Lindner et al. 2010). Agroecosystem and forests are the ecosystems which are the most adversely affected by climate change by means of prevalence of pests, diseases, invasive species, species endangerment and high levels of food insecurity.

Introduction

The green revolution in mid-sixties stirred by research based new technological developments involving new materials, models and ways of organizing farm inputs (water, fertilizer, chemical etc) and government’s policies transformed the agriculture dramatically. The outcome chewed a many fold increase in production and productivity viz. food grain production of 211 million tonnes (which was only 74.23 million tonnes in 1966-67) and food grain productivity of 1697 kg ha-1 (which was only 644 kg ha-1 in 1966-67). The country thus became self-sufficient in food production despite tremendous pressure to sustain 16% of world human population and 10% of cattle population with just 2.4% of total land.

Introduction

Agroforestry system (AFS) is a form of sustainable land use that combines trees, shrubs, crops and livestock so as to increase and diversify farm and forest production along with conserving natural resources. Microorganisms play a crucial role in improving nutrient availability to plants, thereby decreasing the dependence on chemical fertilizers and achieve sustainable agriculture through agroforestry (Araujo et al. 2012). Arbuscular mycorrhizal (AM) fungi, plant growth-promoting rhizobacteria (PGPR), and the association of rhizobia with leguminous plants are symbiotic associations of high economic importance for increasing agricultural production. Yadav et al. (2010) studied soil biological properties under different tree based traditional agroforestry systems in a semi-arid region of Rajasthan, India and concluded that biological properties can be optimized in the soil under AFS. Many authors have reported that soil microbial biomass and microbial diversity are greater in the AFS due to the ameliorative effects of trees and organic matter inputs and the differences in litter quality and quantity and root exudates (Mungai et al. 2005; Sørensen and Sessitsch, 2007). Also, the presence of a large and diverse soil microbial community is crucial to the productivity of any agroecosystem. Moreover, more than one plant species in AFS have been reported to have shown a larger diversity and/or abundance of mycorrhizal fungi than monocultures (Cardoso and Kuyper 2006) and more efficiency in biological fixation of the nitrogen, especially in tropical soils (Freitas et al. 2010). Also, soil microbial biomass has other important functions in the soil such as nutrient cycling and the degradation of pollutants (Watanabe and Hamamura 2003; Araújo and Monteiro 2006).

Introduction

Rainfall is the principal source of water in arid areas, which augments soil moisture, groundwater and surface flows. Agriculture and several of the other economic activities in arid areas depend on rain. This region is devoid of any well defined perennial river system. Under such circumstances every drop of water becomes very precious. Of the total water use about 85% of water is used for irrigation and remaining 15% is used for drinking, industrial and other purposes. About 65% of irrigation water and 30-40% of drinking water is subjected to serious losses. Hence, increasing water use efficiency coupled with increasing availability of water through rainwater harvesting and management is of prime importance for sustainable development of arid areas. Rainwater harvesting, its conservation and efficient utilization can solve problem of water scarcity to the greater extend. Rainwater harvesting in small ponds (nadis), underground tanks (tankas), Khadins (Low lying areas) etc. is an age-old tradition in arid zone of Rajasthan. These traditional rainwater harvesting structures vary in design, shape and size. These traditional methods have undergone several changes for being more economical and efficient. Central Arid Zone Research Institute (CAZRI), Jodhpur since its inception in year 1959 is continuously working for development and refinement of water efficient techniques for crop production, individuals and for the communities for development in hot arid zone of India.