eChapters

9.1 Methylases
    
9.2 Polymerases
    
9.3 Nucleases
    
9.4 Ligases
    
9.5 Phosphatase
    
9.6 Topoisomerase
    
9.7 Restriction enzymes

1.    Panama wilt
        
2.    Moko or Bacterial wilt
        
3.    Sigatoka disease
        
4.    Anthracnose
        
5.    Bunchy Top

1.    Scab
        
2.    Powdery mildew
        
3.    Fire blight
        
4.    Soft rot
        
5.    Bitter rot

1.    Downy mildew
        
2.    Powdery mildew
        
3.    Rust
        
4.    Wilt

7.1    Drip Network
    
7.2    Performance of the Drip System
        
Questions and Problems
        
References

The aim of this book is to further strengthen the knowledge of readers on management of disasters so that they are better prepared to cope with more frequently occurring natural and manmade disasters.

The process that helps us to face disasters effectively is commonly known as disaster preparedness.  When a disaster strikes, it affects us directly and immediately. While as the government, international agencies such as United Nations, Red Cross Society, non government organizations, like Ramakrishna Mission, OXFAM, CARE, resident welfare associations in urban areas and panchayats in rural areas assist us when faced with disasters the community, invariably remains the first responders. Hence, the individuals as a part of community should prepare adequately to prevent, face and respond to disasters effectively. History has  shown that where communities have prepared adequately to confront disasters, losses to life and property have been less and environment could be protected. People living in an area may be prone to more than one type of disaster. For example Kutch District of Gujarat is vulnerable to floods, drought, cyclones and to earthquakes. Such an area is called ‘multiple hazard’ zone.

Introduction

Drought is temporary reduction in water or moisture availability significantly below the normal or expected amount for a specific period. This condition occurs either due to inadequacy of rainfall or lack of irrigation facilities, unexploitation or deficient availability for meeting the normal crop requirement in the context of the agro-climatic conditions prevailing in any particular area. This has been scientifically computed as Moisture Index (MI). Drought in this context can be defined as adverse MI or adverse water balance which may be attributable not only to a prolonged dry spell due to lack or sufficient rainfall but also due to such other factors as excessive evapo-transpiration losses, high temperature, low soil holding etc.

In most countries, extension systems have now been operating for some time and problems within them will often require a refinement of the existing system rather than design of a new system from scratch.

The purpose of this chapter is to provide extension managers with a simple approach in analysing common extension problems. In most cases, suggestions are given for possible actions to consider in investigating the causes of the problem further and ultimately in overcoming it. However the primary purpose of the chapter is not ‘to give solutions to all known problems’ but to assist the extension manager in analysing problems to find their root cause (or causes). The chapter is designed to be simple and easy to use, and thus cannot do justice to the complexity of all the problems and situations faced by extension personnel.

Many different approaches might be used to organise this process and information. The chapter has tried in all cases to begin with noticeable problems and by analysing these through an hierarchy or problem tree, help users to analyse and reach their own conclusions as to the best solution.

Introduction

Good quality seed plays an important and crucial role in deciding the performance of any crop. Availability of quality seed is one of the important factors for increasing the production and productivity of agriculture. Seed is the cheapest and most efficient input as compared to other inputs like fertilizer, pesticides, water etc. Timely availability of quality seed of the right variety/ hybrid in adequate quantity decides the strength and health of agricultural economy.

Seed has been defined in many ways. Botanically, seed is defined as “a mature fertile ovule”. Seed is also defined as “an embryo, a living organism, embedded in the supporting or food storage tissue surrounded by seed coat”. Seed is also defined as “any plant part (cuttings, corms, bulbs, rhizomes etc.) used for growing commercial crops”.

Seed a basic input in Agriculture, a carrier of new technology, a basic tool for secured food supply. Seed is a principal means to secure crop yield in less favorable production areas. Seed is an important medium for rapid rehabilitation of agriculture in cases of natural disaster.

Introduction

The food processing sector is highly fragmented industry, it widely comprises of the following sub-segments: fruits and vegetables, milk and milk products, beer and alcoholic beverages, meat and poultry, marine products, grain processing, packaged or convenience food and packaged drinks. A huge number of entrepreneurs in this industry are small in terms of their production and operations, and are largely concentrated in the unorganized segment. This segment accounts for more than 70% of the output in terms of volume and 50% in terms of value. Though the organized sector seems comparatively small, it is growing at a much faster pace.

The food processing industry can be classified into three categories: organized (25%), small scale (33%) and unorganized (42%) (Source: FAIDA/ Minstry of Food Processing Industries). The share of food processing in total manufacturing is only 9% in India.

Introduction

An agricultural project is defined as an investment activity where financial resources are expended to create the capital assets with an anticipation of benefits over time. In other words, it is an activity where money is spent to realize the expected returns and requires planning, financing and implementation as a unit. In fact, the whole complex of activities using resources to gain benefits constitute the agricultural projects. The agricultural project may include projects such as irrigation, dairy, poultry, piggery, rural credit, social forestry, land reclamation/leveling, rural development projects, etc. Moreover, the dividing line between an “investment “ and a “production” expenditure is an agricultural project.  For instance, the fertilizers, pesticides, seeds, etc. are called investments where returns are realized over the service period of asset. Likewise, the plantation of fruit crops though constitute an investment yet the paddy transplanting as production expense, i.e., the difference exists in time span to grow plants.

Role of Ministry of Micro Small & Medium Enterprises

Engage in promotion & development of MSME’S in the country through framing proper policies and schemes.
Implementing policies and schemes through its attached office DC, MSME, Nirman Bhawan, New Delhi. 

A. Answer the following Question

1.    Why availabilityof bacterial protein is low?

Ans: Because, bacterial protein is protected by cell wall (mucopeptide polymer) which are resistant to enzymatic action.

2.    What is isoelectric pH?

Ans: The pH at which an amino acid exists in solution as a zwitter ion is called isoelectric pH that is the pH at which the amino acid is electrically neutral and has no tendency to migrate towards either electrode.

3.    What is ketogenic amino acid?

Ans: Ketogenic amino acid refers to those amino acids which give rise to acetyl CoA and consequently the potential fatty acids producers. e.g. leucine

4.    Why chicks require higher level of arginine?

Ans: Since they do not have urea cycle and feathers are very high inarginine.

5.    Why chicks require high level of glycine?

A. Answer the following questions

1.    What is omega carbon atom?

Ans: The methyl carbon atom at the distal end of the fatty acid chain is called omega carbon atom

2.    Why mammals can not synthesize essential fatty acid?

Ans: Because of their inability to introduce double bond between the 9th carbon atom and the terminal methyl group of the fatty acid chain.

3.    What is acid value?

Ans: It is defined as the number of milligram of KOH required to neutralize the free organic acids in 1 gm of fat.

4.    What is saponification number?

Ans: It is defined as the number of milligrams of KOH required to neutralize the free fatty acid and saponify the esterified fatty acids in 1 gm of fat.

5.    What is iodine number?

A. Answer the following question

1.    What is Gross Energy?

Ans: Gross energyistheamount of heat givenoffwhen a substance is completelyburntor oxidizedtooxidationproducts like carbon dioxide,waterandothergases ina bombcalorimeter containing 25-30 atmospheric oxygen psi.

2.    What is BTU?

Ans: It istheamount of energyas heat required toraise temperature of 1 pound of water by 10F

3.    What is Heat Increment (HI)?

Ans: The increase in heat production after the ingestion of feed when the animal is in a thermoneutral environment is known as heat increment.

4.    Why digestible energy (DE) is called apparent DE?

Ans: It is calledapparent because thefaecalenergyincludes energy of undigested feed; microbial cell residues spent digestive enzymes and abraded intestinal mucosa (FEm).

5.    WhyME values are higher in non-ruminants than ruminants?

A. Answer the following questions

1.    What isdigestibility?

Ans: The portion of a feed or any single nutrient of feed which is not recovered in faeces i.e the portion which has been absorbed by the animal is called digestibility.

2.    Whatis digestibilitycoefficient?

Ans: When the digestibility is expressed in % then it is called digestibilitycoefficient.

3.    Why digestibility of ash is not calculated?

Ans: Digestibilityfor ashisnot calculatedsince mostof the minerals are re-excreted in the gut and it does not contribute to the energy content of food.

4.    Why digestibility of carbohydrate is overestimated?

Ans: This is because there are losses of ingested carbohydrate as methane and carbon dioxide. But these losses are not counted.

5.    Why digestibility of crude protein is underestimated?

A. Answer the following questions

1.    Why protein requirement for maintenance in cat is high?

Ans: It is due to the inability of the nitrogen catabolic enzymes in the cat’s liver to adapt to changes in dietary protein intake.

1.    Why arginine is dietary essential in cat?

Ans: Because, cat is unable to synthesize ornithine which is an arginine precursorwithin theurea cycle. Aminoacid glutamic acid and proline is precursor of ornithine in the intestinal mucosa of all mammals.However, an enzyme thatis required in the pathway, proline-5-carboxylate synthatase is absent in cat’s intestinal mucosa. In the absence of dietary arginine, a high catabolism of protein generates a load of ammonia that cannot be detoxified by its incorporation to urea and hyper ammonia develops.

2.    Why taurine is dietary essential in cat?

1. Introduction

Osmotic dehydration is a useful treatment of dehydration compared to the other dehydration processes, as other dehydration processes bring adverse and irreversible changes in physical and nutritional status of food material. Recently in many studies it was found out that since plant membranes are semi-permeable in nature, not only moisture but transfer of solute from osmotic solution to the food material also takes place. Another kind of transfer which was also noticed is the leaching of micronutrients from the cells of food to the osmotic solution, but the amount being very low, this transfer can be neglected. (Mayor et al., 2006). The mass transfer kinetics was studied for different food materials (Hawkes and Flink, 1978). Effect of different variables such as pressure and temperature were also studied (Rastogi and Niranjan, 1998). The effective diffusivities for both water loss and solute gain can be calculated by using various methods which gives the rate of diffusion of solute and moisture for the food material. The finding of solute gain and leaching of micronutrients pointed the requirement of maintaining the osmotic dehydration process, which could be done by maintaining the process variables of osmotic dehydration. Impact of various process variables on osmotic dehydration and their best levels at which maximum water loss and minimum solute gain could be obtained had to be calculated out. For this purpose, optimization of process variables through response surface methodology (RSM) could be best utilized (Uddin et al. , 2004). RSM is a statistical tool which gives the random combinations of input variables to give the best output result as required. Various works have been done on optimization of process conditions of osmotic dehydration taking different samples of foods. In this study, bamboo shoot species (Bambusa balcooa) was taken as sample for osmotic dehydration to optimize the process variables for osmotic dehydration of bamboo shoots using salt as osmotic agent followed by calculation of effective diffusivity of water and solute during osmotic dehydration of bamboo shoot.

1. Introduction

Cherry peppers (Capsicum frutensis var. cerasiforme) which is locally known as dallae khorsani, is one of the important cash crops of Sikkim and Darjeeling hills. They are small, round shaped, fleshy and heavily seeded. They are green in color in early stage of fruiting and turn red when fully matured. It is an excellent source of vitamin A and C, which are important antioxidants (Howard et al., 1994). Cherry peppers are an ideal size for pickling or brining. Its hotness ranges from moderately mild to very high.

Due to its high moisture content (about 85% w. b. ), shelf life of cherry pepper is limited to 7 - 10 days. This makes it rare and costly during the off season. Hence, preservation of cherry peppers is of considerable importance both to the farmers as well as to the consumers. Drying is one of the oldest methods for preservation of cherry peppers to make it available throughout the year. To increase shelf life of chilies, drying up to 10 % moisture content (dry basis) is required which is accepted in export market.

For drying chillies, sun and hot air drying are the most common drying method used. However, due to the prolonged drying time of 16-48 h, the quality of the dried chillies is reduced (Kim et al., 2002). Many researchers paid more attention to innovative techniques such as short and medium-wave infrared radiation drying (SMIR) which not only maintain product quality, but also increase the drying rate. Moreover, infrared drying could save up 50% energy compared to convective drying (Nowak & Lewicki, 2004). The ability of infrared radiation to penetrate and heat the inner layers results in higher rate of heat and mass transfer (Ginzburg, 1969).

1. Introduction

Biopolymers nowadays are grabbing a nice place in packaging industries replacing synthetic polymers. The most important advantage of biopolymer over synthetic polymers is that they are biodegradable and can be developed from agricultural or food processing wastes. Among the wide variety of materials currently used in food packaging, polymers have taken a major share because of their versatility and advantageous performance (Valdés et al., 2014). However, most polymers used for food packaging are not biodegradable or compostable and therefore represent an increasingly serious end-of-life disposal problem worldwide. Although food package stability during the shelf-life of the product is an advantage, it turns into a disadvantage when the packages enter the post-use phase.

1. Introduction

Citrus is a common term and genus (Citrus) of flowering plants in the Rue family, Rutaceae. Citrus fruits are non-climacteric and respiration slowly declines and the production and release of ethylene is gradual. India ranks sixth in the production of citrus fruits in the world. Citrus wastes typically are about 45- 50% of the weight of citrus original and the percentage of waste to 30-50% for vegetables and fruits in general. Natural colour plays a significant role in determining the degree of consumer acceptance of the product. In addition, carotenoids (vitamin A precursor) have high nutritional values which are important for human nutrition.Francis and Isaksen (1988) stated that carotenoids play a very important role for extraction as for protection of health against cancer, cardiovascular and eye disease and as anti-oxidant. Carotenoids play important roles in human nutrition through their provitamin A activity, but also by acting as antioxidants, for prevention of age-related macular degeneration or skin protection against UV radiation. The antioxidant capacity of carotenoids was proved for pure compounds as well as for plant extracts and food. The main objective of this research work is extraction, determination and identification of natural colorants from different citrus wastes (citrus peel). Also to study the effects of pH and oxygen on the stability of extracted pigments and determination of the specific carriers for the extracted pigments using solid matrices (starch, dextrin, arabic gum and flour).

1. Introduction

Milk is considered to be an adequate source of valuable macro nutrients, fat, protein, lactose. Vitamins and micronutrients making it a wholesome food. It can serve as an excellent carrier product for extra nutrient and if enriched or fortified it can satisfy the nutritional needs of the population. Soybean is an excellent source of low cost protein and has been an important nutritional component and medical investigation have revealed the great potential of soy foods for lowering blood cholesterol levels and the incidence of heart disease and cancer. The dry soybean contains roughly 40 % protein, 20% oil and 35% soluble (sucrose , raffinose, stachyose, etc. ). Aqueous extract of soya is an ideal substitute of animal milk for people suffering from allergic, gastrointestinal and other diseases peculiar to elderly people liu et al. (2004). Soymilk obtained by aqueous extraction from whole soybeans is a well known food product that is growing in popularity in many areas of the world (Hauman,1984). Soy milk is low in fat, carbohydrate, calcium, phosphorus, and riboflavin, but high in iron, thiamin, and niacin in comparison with cows’ milk. Soy milk contains higher amount of protein than buffalo milk and is deficient in sulfur containing amino acids. Soya milk is used in various products like paneer, yoghurts , cheese, tea and coffee whiteners , shrikhand, rasogolla and various indigenous milk sweets, confectionary, etc (Kale et al., 2012, Chang et al., 2005) also reported that intake of fermented soymilk improves the ecosystem intestinal tract by increasing the amount of probiotics. During the last years, soy beverages consumption has gradually increased due to their significant concentration of health promoting compounds, such as iso flavones.

1. Introduction

Jackfruit (Artocarpus heterophyllus Lam. ) a member of the family Moraceae is the largest tree-borne fruit in the world. India is the second biggest producer of the fruit in the world and is considered as the motherland of jackfruit. The jackfruit is native to parts of South and Southeast Asia and is believed to have originated in the rainforests of Western Ghats of India and is cultivated throughout the low lands in South and Southeast Asia. Major jackfruit producing countries are Bangladesh, India, Myanmar, Nepal, Thailand, Vietnam, China, the Philippines, Indonesia, Malaysia and Sri Lanka. There are 100-500 seeds in a single fruit (Sidhu, 2012). It is composed of rind, edible bulbs of yellow-flesh and seeds. The ripe fruits are eaten or processed into snacks and canned products. Seeds make up around 10 to 15% of the total fruit weight (30-365/ fruit) and have high carbohydrate and protein contents (Ocloo et al., 2010). Mostly the seeds, rind and strands are discarded as waste. So, the seed, rind and strand flour can be an alternative intermediatory product, which can be stored and utilized, both for value addition and to blend with other grain flours without affecting the functional and sensory profile of the final product.

1. Introduction

Banana is having number of species and belongs to genus Musa of the family Musaceae. Bananas are produced in large quantities in tropical and subtropical areas. World production of Musa in 2003 was estimated at 102 million MT of which about 68% was classified as bananas and 32% as plantains (FAO, 2003). For growing banana need special climate and they are mainly produced in developing countries P (Zhang et al., 2005). The crop is of major importance to the people in the growing. The largest producer of banana is India (27%) and other countries are Ecuador, Brazil, Indonesia, Philippines and China etc. Ecuador (42. 3%), Colombia (24. 7%), Philippines, Dominican Republic, Belgium, Italy, Peru, France, Netherland, Germany are the top exporter countries in 2009.

Banana is a botanically a berry require a warm, humid, frost-free climate with optimum temperatures between 22 and 31°C. In several report it was found that banana plant die in ground level at below temperature -2°C. Primary component of the aroma of fresh bananas is isoamyl acetate which is also called as banana oil. Banana is highly energetic food and rich in potassium, sodium, phosphorus, chlorine, magnesium, sulphur, silicon, calcium; and the vitamins: A, B1, B2, C and B3 (niacin). Banana helps in lowering cholesterol, enhances liver function, regulate heart rhythm and disease, decrease the risk of stroke, regulate Bowel movement, helps keep blood pressure under control and helps in weight loss.

1. Introduction

King chilli belongs to the genus Capsicum and species chinense, which is world famous for its heat content. King chilli measures 60 to 85 mm (2. 4 to 3. 3 inches) long and 25 to 30 mm (1. 0 to 1. 2 inches) wide with a red, yellow, orange, or chocolate color. The plant came into limelight when it was announced as the hottest chilli in the world in 2006 (Baruah et al., 2014). The people of the North-eastern India use the fruits of King chilli in different food formulations like flavouring curries due to its high-quality fragrance and pungency and also for various medicinal treatments like rheumatism, arthritis, gastritis, ankylosing spondylitis, digestive diseases (Sarwa et al., 2012) and to reduce chronic congestion (Raktim and Changkija, 2009). It is also used as a bird, animal and insect repellent as well as a biochemical pesticide. The extremely hot or burning sensation of chilli is due to the presence of capsaicinoids found only in Capsicum (Hoffman et al., 1983).

In northeastern India, King chilli has been cultivated in a traditional manner since time immemorial and there exists a considerable amount of genetic variability among the landraces (Raktim and Changkija, 2009). The pharmaceutical applications of capsaicinoids are attributed to their analgesic, antiarthritic, anticancer and antioxidant properties. In fact, capsaicin has been at the centre of intense research for elucidating the basis of its pharmacological properties and exploiting the therapeutic potential (Prasad et al., 2005). It has also been reported that capsaicin inhibits the growth of prostate cancer cells (Mori et al., 2006). The antioxidative capacity of chilli is higher than ginger, garlic, mint and onion (Shobana et al., 2000), which may play an important role in the process of chemoprevention (Yu et al., 2002).

1. Introduction

Sea Buckthorn (Hippophae sp. ), a high altitudinal, thorny, temperate, deciduous, dioecious, actinorhizal shrub or small tree belonging to the Kingdom-Plantae, Clades-Angiosperms, Eudicots and Rosids, Order- Rosales, Family-Elaeagnaceae and native to Eurasean Countries like India, China, Russia, Nepal, Pakistan, etc. (Barik et al., 2016). SBT is having tolerance towards a wide group of pests and insects, can grow in extreme nutrient deficient conditions and temperature range of -40 °C to 40 °C. It contains more than 190 reported invaluable phytochemicals and has the potential for multidimensional use as food, fodder, medicine, fuel, and conservation of soil and bio diversity (Qinxiao and Hongyan, 2003; Barik et al., 2016). SBT berries, leaves, stem and root barks also contain nutrients and bioactive compounds which mainly include lipids, sugars, amino acids, organic acids, fatty acids, carotenoids (β-carotenes, lycopene, zeaxanthin), tocopherols (α β, γ, δ), sterols (ergosterol, campesterol), Vitamins (A, C, E and K), phenolic and flavonoid compounds (gallic acid, caeffeic acid, ferulic acid, isorhamnetin, kaemferol, quercetin, myricetin) and isoprenols (Tiitinen et al., 2005; Anderson et al., 2009; Barik et al., 2016). All these studies are primarily based on the prominent SBT species Hippophae rhamnoides. However, Sea Buckthorn (Hippophae salicifolia) of North East India is an underutilized non-conventional plant and its potential is not yet fully explored. Very scanty literatures are available on the identification, documentation and preliminary qualitative phytochemical characterization of SBT from North East India (Basistha et al., 2010; Pradhan et al., 2015). But there is no any report on systematic qualitative phytochemical characterization of all the plant parts of SBT from North East India in general and SBT of Arunachal Pradesh in partcular.

Introduction

There are manypeople all over the world who have a certain level of sensitivity or intolerance towards milk and milk products. The reactions to milk which involve the immune systemare termed as milkallergy, whereas, difficulty in the digestion of the milk and milk products is known as milk intolerance. Milk intolerance occurs due to malabsorption of milk sugar (lactose) in intestine, a condition in which lactose is not digested into its monomers (galactose and glucose) due to lower activity or insufficiency of lactase enzyme. Inability to digest lactose, which is a disaccharide present only in milk, is specifically known as lactose intolerance. However, hypersensitivity involves the adverse immune reaction(allergic reaction) inthe body causeddue to the ingestion of milk proteins. Milk and milk products are major source of basic as well as essential nutrients and cannot be skipped from the diet of the individual. It is a rich source of calcium,which is essential for the growth and reformationof bones. The decline in calcium may lead to thin, fragile bones that break easily, a condition called osteomalacia or osteoporosis in women. Thus, it is a matter of concern for both children andadults whoare allergic or intolerant towards milk and milk products and not getting enough calcium and other nutrients in diet. This chapter would provide more insight about milk intolerance and milk allergy/hypersensitivity and how to deal with it.

Introduction

Spectacular accomplishment in every sector has enabled India to be amongtop achieving nations. However, every section of the society is not benefited by these achievements and problem of malnutrition still remains unresolved. Malnutrition is a common problem faced by underdeveloped and developing countries suchas Philippines, Nepal, Sudan,Tanzaniaand Indiasincelongback. Malnutrition includes undernutrition(wasting,stunting,underweight),inadequate vitamins or minerals as well as overweight, obesity and resulting diet-related non communicable diseases(NCDs). As per the latest report of World Health Organization, 52 million children under 5 years of ageare wasted, 17 million are severely wasted and 155 million are stunted, while 41 million are overweight or obese (WHO, 2018). More than 50% women of marriage age are suffering from anemia. If women are malnourished at the time of pregnancyand delivery, the babybornface theproblems such asphysical retardation,sensitive tocommon infections, reduced cognitive abilities, reducedmental development, etc. As per the World Health Organization (WHO) guidelines, starting from the date of conceiving a child, the first 1000 days are a critical window from nutrition point ofview.Unfortunately, inseveral regions of developingcountries includingIndia, neither the mother nor the babyis provided with the right quantity and qualityof food during this window period. Therefore, it is important for the policymakers to identifymalnutrition at an earlystage for timelyplanningand implementation of various intervention strategies at the community, village, and district level. NitiAyog, Government of India (GoI) (previously known as Planning Commission), in an effort to eliminate malnutrition,regularlyplans several short and longtermnutritionalprogrammesand policies.In thischapter,we willdiscuss some of these policies launched since independence and their impact in combatingmalnutrition.

ABSTRACT

Maharashtra ranks second in terms of area under tree cover, however, still large chunk of land is lying without use or are underutilised because of their degradation status. Such degraded lands can be put to use through agroforestry. Agroforestry is being adopted in this state in one way or the other by raising trees on farm bunds, around cattle sheds etc. since earlier times. New innovative technology has now been developed by all the agricultural universities of state. The paper provides detailed information of different agroforestry systems which have been developed and practised in the state.

INTRODUCTION

Maharashtra is the third largest state of India having the geographical area of 307,713 km², which constitute 9.4 per cent of the country’s geographical area. The human population of the state is 96.75 million (9.4% of country’s population) of which 57.6 per cent is rural and 42.4 per cent is urban. The average population density is 314 persons per km². The tribal population is 9.3 per cent of the state population. The state supports livestock population of 36.4 million, which is 7.7 per cent of the country’s livestock population. The state rank second amongst all the state/UTs in terms of area under tree cover and third in term of recorded Forest Area (Anon, 2001).

ABSTRACT

Assam has been divided into six agroclimatic zones on the basis of soil, climate, terrain and vegetation. It comprises of Brahmaputra plain zone to Hill zone. The paper deals with the traditional agroforestry systems prevailing in all these agroclimatic zones along with the research activities which are going on in Assam. Salient research achievements with respect to tree-crop compatibility are given at the end of the chapter. Impact of agroforestry research on farmers of Assam in terms of adoption is also given.

INTRODUCTION

Assam, one of the eastern states of India, lies between 240 N and 28018’ N latitudes and 8904’ E and 960 E longitudes. The state is surrounded by Bhutan and Arunachal Pradesh in the north, Nagaland, Manipur and a part of Arunachal Pradesh in the east, Mizoram, Tripura and Meghalaya in the south and West Bengal in the west. The state is endowed with abundant fertile land and water sources with a total geographical area of 78,523 km² with population density of 318 per square kilometer.

ABSTRACT

In the state of Meghalaya, forests are being degraded by age-old practice of shifting agriculture by native tribes and other human activities. Agroforestry has a great potential both from the point of view of restoration and maintenance of soil fertility and to increase agriculture production. The traditional system of agriculture in the state is primitive, labour intensive and dependent on rainfall. The proportion of space occupied by the tree and crop components in the traditional system largely depends upon factors like soil types, plant species and crop arrangements. The common traditional systems practiced in the state may be grouped under agrisilviculture, agrihorticulture, silvihorticulture, pastoralsilviculture and pastoralhorticulture. Agroforestry systems can play an important role in soil conservation and improvement in moisture and nutrient levels through efficient cycling of nutrients, which in turn would enhance agriculture production. The analysis of different agroforestry systems in the state of Meghalaya suggests that further improvement of the existing systems may yield high productivity and make them more sustainable.

INTRODUCTION

Agroforestry is an ideal scientific approach to tackle the problems of degraded lands and to bring about eco-restoration and maintenance of soil resources. The significance of tree based land use systems in general and agroforestry in particular, has been realized in improving the economy of farmers having small land holdings (Chauhan and Dhyani 1990, Beer et al 1990, Fisher 1990, Dhyani and Tripathi 1999). The fertility of soils can be improved under the influence of tree cover, which checks erosion, contributes to accumulation of organic matter content, adds nitrogen through symbiotic N-fixation by leguminous or actinorrhizal trees and continuously replenishes the nutrients through effective recycling mechanisms. It offers a practical means of achieving greater outputs and at the same time maintains soil fertility that ultimately helps in increasing productivity of agricultural crops and trees.

ABSTRACT

Andhra Pradesh is predominently an agrarian state, where 70 per cent of the people live in rural areas. Andhra Pradesh has 7 Agroecological zones spread over in coastal Andhra, Telangana and Rayalaseema regions with varied climatic situations. The existing agroforestry systems in costal Andhra are Mango-based Agrihorticulture system, Betelvine-sesbania system, Borrasus flabellefer, Glyrecidia boundary plantations, Eucalyptus, Causarina and Subabul block plantations. Besides Neem, Tamarind and jamuns are also found in isolated manner. In Telangana region, Custard apple based Agrihorticulture system, Mango based Agrihorticulture system, Boundary plantations of Neem, teak, Jamun etc., are present. Eucalyptus based Agrisilviculture system is propagated by ITC, Bhadrachalam in Khammam and elsewhere in the state. In Rayalaseema region in all the districts tamarind, mango and sweet orange based agroforestry systems are prominently seen. The betelvine - sesbania system alone is fetching an income of 100 crores/year to the states’ exchequer. The common trees and tree systems available in the state are : Azadirachta indica, Tamarindus indica, Acacia nilotica, Pithecellobium dulce, Parkinsonia aculeata, Pterocarpus santalinus, Dalbergia latifolia and many others.

Nanomaterials are a field which takes a materials science-based approach to nanotechnology. It studies materials with morphological features on the nanoscale, and especially those which have special properties stemming from their nanoscale dimensions. Nanoscale is usually defined as smaller than a one tenth of a micrometer in at least one dimension, though this term is sometimes also used for materials smaller than one micrometer.

An aspect of nanotechnology is the vastly increased ratio of surface area to volume present in many nanoscale materials which makes possible new quantum mechanical effects, for example the “quantum size effect” where the electronic properties of solids are altered with great reductions in particle size. This effect does not come into play by going from macro to micro dimensions. However, it becomes pronounced when the nanometer size range is reached. A certain number of physical properties also alter with the change from macroscopic systems. Novel mechanical properties of nanomaterials are a subject of nanomechanics research. Catalytic activities also reveal new behaviour in the interaction with biomaterials.

Polymeric nanoparticles are nanoparticles which are prepared from polymers. The drug is dissolved, entrapped, encapsulated or attached to nanoparticles and depending upon the method of preparation, nanoparticles, nanospheres or nanocapsules can be obtained. Nanocapsules are vesicular systems in which the drug is confined to a cavity surrounded by a polymer membrane, while nanospheres are matrix systems in which the drug is physically and uniformly dispersed.

In recent years, biodegradable polymeric nanoparticles have attracted considerable attention as potential drug delivery devices in view of their applications in drug targeting to particular organs/tissues, as carriers of DNA in gene therapy, and in their ability to deliver proteins, peptides and genes through oral route of administration.

In spite of development of various synthetic and semi synthetic polymers, natural polymers still enjoy their popularity in drug delivery, some of them are: gums (Eg. Acacia, Guar, etc.,) chitosan, gelatin, sodium alginate, and albumin. A range of materials have been employed to delivery of bioactive agents. A polymer used in controlled drug delivery formulation, must be chemically inert, non-toxic and free of leachable impurities. It must also have an appropriate physical structure, with minimal undesired aging, and be readily processable. Some of the polymeric materials are: cellulosics., poly(2-hydroxyethyl methacrylate), poly(N-vinyl pyrrolidone), poly(methyl methacrylate), poly(vinyl alcohol), poly(acrylic acid), polyacrylamide, poly(ethylene-co-vinyl acetate), poly(ethylene glycol), poly(methacrylic acid).

Nanomedicine is the medical application of nanotechnology. The approaches to nanomedicine range from the medical use of nanomaterials, to nanoelectronic biosensors, and even possible future applications of molecular nanotechnology. Current problems for nanomedicine involve understanding the issues related to toxicity and environmental impact of nanoscale materials.

Nanomedicine research is receiving funding from the US National Institute of Health. Of note is the funding in 2005 of a five-year plan to set up four nanomedicine centers. In April 2006, the journal Nature Materials estimated that130 nanotech-based drugsanddeliverysystems were being developed worldwide.

The impact of nanotechnology in the food industry has become more apparent over the last few years with the organization of various conferences dedicated to the topic, initiation of consortia for better and safefood, along with increased coveragein themedia. Several companies which were hesitant about revealing their research programmes in nanofood, have now gone public announcing plans to improve existing products and develop new ones to maintain market dominance. The typesof application include:smartpackaging, on demand preservatives, and interactive foods. Building on the concept of “on-demand” food, the idea of interactive food is to allow consumers to modify food depending on their own nutritional needs or tastes. The concept is that thousands of nanocapsules containing flavour or colour enhancers, or added nutritional elements (such as vitamins), would remain dormant in the food and only be released when triggered by the consumer.24 Most of the food giants including Nestle, Kraft, Heinz, and Unilever supportspecific research programmes tocapturea share of the nanofood market in the next decade.

The definition of nanofood is that nanotechnology techniques or tools are used during cultivation, production, processing, or packaging of the food. It does not mean atomically modified foodor foodproduced by nanomachines. Although there are ambitious thoughts of creating molecularfood using nanomachines, this is unrealistic in the foreseeable future. Instead nanotechnologists are moreoptimisticabout thepotential to changethe existing systemof food processingand to ensure the safety of food products, creating a healthy food culture. They are also hopeful of enhancing the nutritional quality of food through selected additives and improvements to the way the body digests and absorbs food. Although some of these goals are further away, the food packaging industry already incorporates nanotechnology in products.

Poultry meat and eggs have high nutritive value. Egg is used as a standard for measuring the quality of other food proteins. It is a well balanced source of nutrients. Similarly poultry meat is easily digestible, high in protein and low in fat content. It contains all the essential amino acids. Though the poultry meat and egg production have tremendously increased in India during last few decades however due to lack of organized marketing channels poultry producers are not getting reasonable returns. Indian broiler and egg markets are in a disorganized state. In last few decades various efforts have been made so as to organize and co-ordinate marketing channel of poultry meat and eggs. Through these efforts producers are also benefited but only in some particular areas. Therefore, there is need to expand it further covering the country.

What is Marketing?

Marketing may be defined as exchange of a produce for an agreed sum of money. It is a commercial process involved in promoting, selling and distributing a product. In simple words marketing is finding out what customers want and supplying it at a profit. Marketing is a business in terms of customer needs and their satisfaction. As per P. Taylor, marketing is not simply providing products or services; it is essentially about providing changing benefits to the changing needs and demands of the customer.

Organic Farming

The FAO/WHO Codex Alimentarius Commission defines organic farming as “a unique production management system which promotes and enhances agro- ecosystem health, including biodiversity, biological cycles and soil biological activity, and this is accomplished by using on-farm agronomic, biological and mechanical methods in exclusion of all synthetic off-farm inputs”. It is a certification of a production system as opposed to the certification of a product. For a product to be certified organic, all operators in the product chain, including farmers, processors, manufacturers, exporters, importers, wholesalers and retailers must be certified organic. The establishment of organic animal/poultry husbandry requires a specific period called as “conversion period”. This period is the time taken between the start of the organic management on farm and certification of livestock farm and its product. Changing from conventional to organic management system for livestock enterprises requires a careful and gradual approach. It is learnt that global organic product has increased 20% annually over the past 10 years. Though Australia, European Union and USA are leading organic producers, a recent study indicated that developing countries including India are also adopting the system and marching ahead.

Conservation Biology emerged as the scientific study of the nature and status of Earth’s biodiversity with the aim of protecting species, their habitats, and ecosystems from excessive rates of extinction. Biodiversity itself has a wider meaning unifying and taking into account species, within species breeds/ varieties, ecosystem, genetic and molecular diversity.

Need for Conservation

The progenitor of modern-day chicken has been the Red Jungle Fowl and over the years breeds have been developed slowly for commercial purpose as layers and broilers. However we still have lot of indigenous birds which cannot be defined in either category.

Breeding capabilities Vs biodiversity erosion: Presently only about 3-4 poultry breeding companies provide meat stocks for farms around the world. A similar number of companies supply birds for commercial egg production. As a result modern animal industry now uses only a few breeds of any species. Of the many breeds once commonly seen on farms, many have declined sharply in numbers and others have disappeared almost completely.

Productivity Vs Conservation: On one hand, to increase productivity we want certain natural characters to be eliminated and on the other we talk of conserving the indigenous varieties, which sounds contradictory.

Biosecurity means protection against infectious biological agents. These agents include bacteria, viruses, protozoa, fungi, parasites, and any other agents capable of introducing infectious diseases into a poultry flock. Biosecurity therefore means maintaining a flock, poultry house or premises in such a way that infectious agents do not have a chance to enter to cause diseases. The biosecurity may be categorized into three: Conceptual biosecurity, Structural biosecurity and operational Biosecurity.

Importance of Biosecurity

In modern poultry production, birds are reared under intensive system where large numbers are concentrated in small area. As a result, when an infectious agent enters a poultry house, there is probability for widespread dissemination if it is not contained. Besides, the broiler and egg industry of today is under increasing consumer and regulatory pressures to guarantee food safety and meet export requirements. As a result, broiler and layer operations around the world require the supply of breeding stock free of salmonellas specific to avian species (such as S. pullorum and S. gallinarum) and those that could cause outbreaks of human food-borne illness. Inadequate biosecurity can contribute to wide epidemics of highly pathogenic or exotic diseases. An infection by a virulent organism within a facility can be devastating, reducing without overt signs of disease. Once contaminated with pathogens, poultry facilities are extremely difficult and expensive to clean, sanitize and disinfect. Prevention of disease is always less expensive than treatment. The cost of implementing biosecurity system is smaller when compared to financial profit that can be made from production. Good biosecurity is therefore vital requirement in the best possible control of disease.

1.1. INTRODUCTION

The word research derives from the French “recherche”, which means to search closely. Research is a process of investigation. It is an examination of a subject from different points of view. It’s not just a trip to the library to pick up a stack of materials, or picking the first five hits from a computer search. Research is a hunt for the truth. It is getting to know a subject by reading up on it, playing with the ideas, choosing the areas that interest you and following up on them. Research is the way you educate yourself.

Research can be defined as the search for knowledge or any systematic investigation to establish facts. The primary purpose for research is discovering, interpreting, and the development of methods and systems for the advancement of human knowledge on a wide variety of scientific matters of our world and the universe. Research can use the scientific method, but always not necessary.

Scientific research relies on the application of the scientific method, a harnessing of curiosity. This research provides scientific information and theories for the explanation of the nature and the properties of the world around us. It makes practical applications possible. Scientific research can be subdivided into different classifications according to their academic and application disciplines.

WATER IS VERY SPECIAL IN BIOLOGY

Most abundant chemical of life

Special properties:

I. WALL COMPONENTS – CHEMISTRY

The main ingredient in cell walls are polysaccharides (or complex carbohydrates or complex sugars) which are built from monosaccharides (or simple sugars). Eleven sugars are common in these polysaccharides including like glucose and galactose. Carbohydrates are good building blocks because they can produce a nearly infinite variety of structures. There are a variety of other components in the wall including protein, and lignin. Let’s look at these wall components in more detail:

A. Cellulose: β1,4-glucan (structure provided in class). Made of as many as 25,000 individual glucose molecules. Every other molecule (called residues) is “upside down”. Cellobiose (glucose-glucose disaccharide) is the basic building block. Cellulose readily forms hydrogen bonds with itself (intra-molecular H-bonds) and with other cellulose chains (inter-molecular H-bonds). A cellulose chain will form hydrogen bonds with about 36 other chains to yield a microfibril. This is somewhat analogous to the formation of a thick rope from thin fibers. Microfibrils are 5-12 nm wide and give the wall strength - they have a tensile strength equivalent to steel. Some regions of the microfibrils are highly crystalline while others are more “amorphous”.

ALL MOLECULES MOVE CONTINUOUSLY BY SIMPLE DIFFUSION

Heat energy causes molecules to move randomly (sometimes called Brownian motion)

If the concentration of molecules is different in 2 regions (this produces a concentration gradient), diffusion will cause molecules to move from a region of high concentration to one of low concentration

The higher the concentration gradient the more rapid the net diffusion

Diffusion evens out the concentrations so they are equal everywhere (maximum entropy)

If 2 different substances have the same concentration gradient, usually one will move faster than the other

Differences in speed between molecules with the same concentration gradient are given in terms of diffusion constants

A substance with a high diffusion constant moves faster than one with a low diffusion constant

In general, large molecules move slower than small molecules

Diffusion across a membrane is called permeability, and membrane diffusion constants are called permeability constants

The polymerase chain reaction (PCR) is a rapid way of amplifying (duplicating) specific DNA sequences

Method was devised by Kary Mullis of Cetus Corporation, Emeryville He recieved a $20,000 bonus and later a Nobel Prize

DNA heated to high temperature is not destroyed; separates into single strands, but reforms helix when cooled

PCR Method:

DNA to be amplified is put into solution containing:

WHAT IS PLANT?

A. Definition - by most definitions, a plant:

is multi-cellular;

is non-motile

has eukaryotic cells

has cell walls comprised of cellulose

is autotrophic; and

exhibits alternation of generations - has a distinctive diploid (sporophyte) and haploid (gametophyte) phase.

Preliminaries

Section-A : Write True / False

Q.1 Statistics in singular is used to denote a subject (branch) of science.

Q.2 Statistics in plular is used to denote data or methods.

Q.3 The data first time collected is known as primary data.

Q.4 Primary data is collected from published report.

Q.5 Editing of data is not necessary.

Q.6 Consistency must be maintained in data.

Q.7 Baised and unbiased errors are known as statistical error.

Q.8 Arrangement of data in different, rows & columns is known as classification.

Introduction

Environmental Assessment is taken up in this exercise as a rapid assessment technique for determining the current status of the environment and identifying impact of critical activities on environmental parameters. EIA is a relatively new planning and decision-making tool first enshrined in the United States in the National Environmental Policy Act of 1969. It is a formal study process used to predict the environmental consequences of any development project. EIA thus ensures that the potential problems are foreseen and addressed at an early stage in project planning and design. Creation of Environmental Impact Assessment (EIA) system is vital to conform socio-economic development projects to environmental safety and thereby ensure sustainable economic development. In view of the fact that development is an ever-growing process, its impact on the environment is also ever increasing, leading to rapid deterioration in environmental conditions. As such Environmental Assessment provides a rational approach to sustainable development.

It also enables us in carrying out Environmental Cost-Benefit Analysis of projects at an initial stage. It is thus a precursor to detailed analysis of environmental impacts, which are taken up only if a need for the same is established.

Introduction

Water is among the most precious gifts of nature to mankind. Most of the ancient towns of the world grew on the banks of the river, and some of the ancient civilizations are known by the names of rivers. Rivers have always been important sources of drinking water and the means of sustaining human, animal and plant life. Whenever one is dealing with water resources development and utilization, it has to be kept in mind that not only quantity of water but also quality of water is very important. The well being and development of our society is dependent on the availability of water. An increase in groundwater development and utilization for industries and urban water supply has created improper disposal of liquid waste. Defective well constructions, sewage and waste disposal in man made lakes with in the city, open quarries with water and failure to seal the abandoned wells in city area have provided possible openings for downward movement of polluted water into subsurface formations without undergoing the process of natural filtration.

Introduction

Reservoirs constitute the prime inland fishery resource in the country by virtue of their numerous production potential. These man-made ecosystems offer enough scope for stock manipulation through ecological maneuvering, paving the way for production hikes at a relatively low-capital investment. Unlike the aquaculture systems, where the development is capital intensive, a reservoir fishery development is labour productive and ensures employment for some of the weakest sections of our society.