eChapters

1. INTRODUCTION

Packaging waste forms a significant part of solid waste and has caused increasing environmental concerns, resulting in strengthening of various regulations aimed at reducing the amounts generated. A wide range of oil-based polymers is currently used for packaging of various products by different industries including the food industry. These are virtually non-biodegradable and some are difficult to recycle or re-use as they are complex composites having varying levels of contaminants and pose serious health concerns. In the recent years, the use of bio-based and biodegradable products as packaging material has generated a lot of interest amongst researchers as they bring out a significant contribution to sustainable development with a wider range of disposal options.

Bioplastics are polymers that are capable of undergoing decomposition into CO₂, H₂O and inorganic compounds or biomass through predominantly the enzymatic action of microorganisms. Some of these polymers can also be compostable, which leads to their decomposition in a compost site at a rate consistent with known compostable materials. The market for these environmentally friendly materials is expanding rapidly, at the rate of 10–20 per cent per year. The global market for biodegradable polymers exceeds 114 million pounds and is expected to rise at an average annual growth rate of 12.6 per cent to 206 million pounds by 2020.

Bio-based packaging materials are mostly used to pack short shelf-life products, like fresh fruits and vegetables, and long shelf-life products, like pasta and chips, which do not require very high oxygen and/or water barrier properties. However, the inventory of films shows a wide variety in properties, which could make them applicable as a packaging material for other food products with stricter conditions, like MAP packaging. One of the challenges faced by the food packaging industry in its efforts to produce bio-based primary packaging, is to match the durability of the packaging with product shelf-life. The bio-based material offers great potential for the packaging industry. However, it is important to realize that a thorough evaluation of the functional properties of a bio-based material is essential before it can be used as an alternative for the traditional film materials.

1. INTRODUCTION AND IMPORTANCE

Sensory evaluation is one of the important methods of evaluation of the quality of food. Without the sensory evaluation of a product whether it is fresh or processed, it cannot be launched in the market. All the other methods like physical, chemical and microbiological fails for the product development if sensory evaluation is ignored as the final acceptance can come from the sensory evaluation only. So sensory evaluation has got an upper edge as compared to the other methods of food quality evaluation. However, a collective approach of quality evaluation of a product that includes the physical, chemical, microbiological and sensory evaluation is the most acceptable approach today.

In the past, human sensory perception had been the only mean of assessment of product quality as illustrated by the classical examples of cooks who knew how to mask the off-notes long before the microbial assessment of quality came into existence. Everybody relied on the sensory evaluation of food as a criterion of quality assessment. In the past, even the kings depended upon “tasters” to assure that the food was suitable for their consumption in the past. The role of sensory organs in sensory evaluation of food is shown in Table 1. But later on, with the development of instrumentation, sensory analysis was overlooked and the instrumental methods were preferred as they were supposed to provide absolute measures of quality. Consequently, the product quality was traditionally determined by physical, chemical and microbiological criteria with the assumption that the products meeting the prescribed specifications in the above parameters would automatically meet the desired sensory quality. However, soon it was realized that without sensory evaluation, the acceptability of a product cannot be determined.

1. INTRODUCTION

Sensory science is the fundamental physiological and psychological underpinnings of sensory evaluation and includes our basic understanding of the mechanisms of taste and odour, kinesthetic and the various techniques of scaling and statistical analysis, whereas, sensory evaluation could unfold the application of this knowledge and the development of specific methods for the evaluation of the discriminative, descriptive and affective nature of products, in a problem-solving situation. When the Quantitative Descriptive Analysis (QDA) methodology was first described, it represented a decade of experimentation and study of the issue that were perceived at the time to be the impediments in solving “the problem of flavour characterization” Further, new developments and knowledge about sensory evaluation were beginning to have a positive effect on its acceptance by the food industry, but much more needed in be done if it is to contribute in a meaningful way. Today, it is indisputable that flavour is an important attribute affecting consumer acceptance of food and it is taste plus odour. The perception of taste is merely the detection of non-volatile tastants by the tongue while in other words, the perception of odour is the detection of odoriferous volatile aroma compounds by the olfactory nerves ending in the nose. The combination of all the possible flavour stimuli that could be encountered is as vast as the galaxy.

1. INTRODUCTION

Fruits and vegetables are increasing in popularity in the daily diet of people of both the developed and developing countries. Product quality and quality evaluation methods are extremely important. The decisions concerning harvesting, maturity, ripeness and quality are based mostly on subjective and visual inspection of the external appearance of the fruits. The quality of fruits and vegetable is mostly based on size, shape, colour, gloss, flavour, firmness, texture, taste and freedom from external and internal defect. Many techniques for evaluating the external quality parameters are now available commercially. Internal quality parameters such as sugar content, acidity, oil content and internal defects however, are difficult to evaluate. Methods are needed to predict the internal quality of fruits and vegetable better without destroying them. Recently, there have been an increasing interest in non-destructive method of quality evaluation and a considerable amount of efforts has been made in this direction. The development of science and technology, especially of information technology has made available many non-destructive methods of analysis of materials which can also be applied to fruits and vegetables. The fruit industry needs non-destructive techniques for online sorting and certifying high quality fruit.

Non-destructive method can be classified according to the principle used to detect fruit properties; mechanical, acoustic, optical and Nuclear Magnetic Resonance (MRI) Techniques.

1. INTRODUCTION

Food is any substance consumed to provide nutritional support for the body. It is usually of plant or animal origin, and contains essential nutrients, such as carbohydrates, fats, proteins, vitamins, or minerals. The substance is ingested by an organism and assimilated by the organism’s cells in an effort to produce energy, maintain life, or stimulate growth. A food contains some non-nutrients, some of which may even have a detrimental influence on the consumers, while some may be inert and have no effect. Nature has endowed many plants with the capacity to synthesize a wide variety of chemical substances that are known to exert a deleterious effect when ingested by animals and are called as antimetabolites. These substances are also referred to as antinutritional factors when they are present in food/feedstuffs and influence a metabolic pathway when introduced into and/or eaten by an organism.

There is a wide distribution of biologically-active constituents throughout the plant kingdom, particularly in plants, used as animal feed stuff and as human food. The knowledge that these compounds elicit both toxic and advantageous biological responses has given rise to several investigations in recent times as to their possible physiological implications in various biological systems. It is well known that plants generally, contain antinutrients acquired from fertilizer and pesticides and several naturally-occurring chemicals. Some of these chemicals are known as ‘‘secondary metabolites’’ and they have been shown to be highly biologically active. They include saponins, tannins, flavonoids, alkaloids, trypsin (protease) inhibitors, oxalates, phytates, haemagluttinins (lectins), cyanogenic glycosides, cardiac glycosides, coumarins and gossypol and the list is inexhaustible. Some of these plant chemicals have been shown to be deleterious to health or evidently dis-advantageous to human and animal health, if consumed in appropriate amounts. Most of these secondary metabolites elicit very harmful biological responses, while others are widely applied in nutrition and as pharmacologically-active agents. The pharmacological and other beneficial effects of these antinutritional factors in plants have been reviewed here.

1. INTRODUCTION

Marketing is a general term used to describe the activities that lead to the sale of your product. It is the process of planning and executing pricing, promotion and distribution programs to satisfy customer needs. It involves collecting information, analyzing alternative market outlets, developing different product forms, pricing products to compete in the marketplace, defining the scope of the proposed market area and meeting consumers’ needs. So marketing is more than just selling a product or service. It is an essential part of any business. Without a good marketing program, even the best businesses fails.

Value-added agricultural groups typically don’t pay enough attention to marketing. Selling agricultural commodities usually only involves hauling the commodities to a market where there is usually a willing buyer. So farmers often spend their time analyzing brick and mortar issues associated with processing and manufacturing (making the product rather than marketing the product). Often the attitude is that, if we make the product, someone will come along and buy it. So value-added agricultural businesses consistently fail because they do not understand the importance of designing and implementing a good marketing program.

As a first step, ‘A Marketing Primer and Marketing Basics’ will help you with a basic understanding of marketing. Successful marketing involves designing and implementing a marketing strategy for your product. Marketing Strategies provide generic strategies for various types of products and product buyers. In a simple term, marketing activities and strategies result in making products available that satisfy customers while making profits for the companies that offer those products.

Beverage is a drinkable product which includes all drinks fermented or unfermented, sweetened or unsweetened. It may be fruit based or non-fruit beverage. Fruit based beverage is the fruit juice that has been considerably altered in its composition before consumption e.g. drink, squash, nectar etc. In this chapter, preparation of RTS drink and squash has been discussed.

1. PREPARATION OF READY-TO-SERVE (RTS) DRINK FROM FRUITS

Theory: RTS is a type of fruit beverage which contains at least 10% of fruit juice and 10 degree Brix as Total Soluble Solids (TSS) with 0.3% acidity. It is not diluted before serving, hence it is known as ready-to-serve beverage. It can be prepared from fresh/preserved pulp/juice of various fruits like mango, litchi, apricot, guava, lemon etc.

PRACTICAL 1: PREPARATION OF READY-TO-COOK MUSHROOM PASTA

Pasta is a product originally made from wheat and is of different shapes and sizes. It is generally rich in carbohydrate but is deficient in protein especially amino acid balance. Therefore, addition of spices and dried vegetables may solve this problem. Moreover, fortification of pasta with tomato, garlic, mushroom or spinach makes it nutritious for consumption. Since instant foods are widely becoming popular and consumed throughout the world and is also a fast growing sector of the noodle industry because of busy life schedule of people.

FRUIT TOFFEES

Fruit toffees can be prepared from different fruits like apricot, plum, apple and other fruits. Concentrate the fruit pulp to about half of its volume by cooking with sugar and other ingredients. Milk powder should be added in the form of paste. Heavy stirring is required till it hardens enough on cooling.

EXPERIMENT: MINIMAL PROCESSING OF CAULIFLOWER (FREEZING PRESERVATION AND STEEPING PRESERVATION)

Materials and reagents

Material : Fresh cauliflower, glass jars, polythene pouches

Reagents: 15% sodium chloride

EXPERIMENT

TECHNOLOGY FOR EXTRACTION OF KERNEL OIL FROM STONE FRUITS

Apricot, peach, plum, cherries, nectarines etc are the important stone fruits belonging to the family Rosaceae. These fruits are known to contain stones/pits i.e., apricot (6.0-11.5%), peach (7.5-11.5%), plum (4.5-7.0%) and these stones are reported to contain kernels (%) apricot (28.0-32.0%), peach (5.7-5.9%), plum (10.0-20.8%), almond (28.0-30.0%). These kernels can yield an oil yield of (42.5-45.5%), (38.5-41.5%), (39.2-40.6%) and (52.0-58.9%), respectively. Thus, these stone fruit kernels can be utilized for extraction of kernel oil by using the improved technology developed for extraction of oil. The developed technology consists of mechanical decortication of stones by the use of mechanical decorticator, kernel separation by using specific gravity separation technique, oil extraction by using table oil expeller and oil filtration through oil filter press followed by packing in PET bottles and PE pouches.

Mechanical decorticator: The mechanical decorticator is a type of roller crusher consisting of two rollers moving in inward opposite directions with the help of 3 HP motor and is provided with a hopper and feeder assembly. The clearance between two rollers is adjusted according to the respective size of stones.

Table oil expeller: Oil expeller is a 24 patti screw type oil expeller driven by 7HP motor, in which the kernels are fed into the moving hopper at pre-determined flow rate, which are pressed in between rollers (worm) and side walls of the expeller. The kernels are then, passed through the expeller 3-4 times until a thin slice of press cake is obtained.

1. INTRODUCTION

During fermentation, the fruit wines have to be monitored for different parameters to know the progress of fermentation and to control the quality of the finished products. It is essential to maintain the quality of the products, for which it is necessary to keep a complete record of wine fermentation. One such form is the fermentation control record or fermentation logbook, which is kept to monitor and record fermentation progress. It includes the name of fruit, variety, original characteristics of juice/pulp, amelioration, tank number, inoculum type and quantities, sampling time, date of start of fermentation and completion. It should also have daily record of temperature of fermentation, total soluble solid or ^oBrix reading, titrable acidity and volatile acidity, racking time/date and other comments on the fermentation. Fermentation control records should be completed and all new wines be entered in the bulk wine book inventory, the annual supplemental records can be kept in a file entitled, for example ‘Vintage season 2018’.

Plant breeding is described as an art and science of changing the genetic architecture of plants with a goal towards betterment of mankind. Apart from this generalized concept, plant breeding is accomplished through inter-disciplinary mode assorted from simple selection in a variable plant-population having some desirable traits to the application of biotechnology and more. Worldwide, cultivars of different crops are routinely manufactured by Multinational and National level Industries, Government Institutions, Universities, Crop specific Organizations, professional plant breeders and even by the individuals such as gardeners and farmers.

Plant breeding is basically operated by the principles of Genetics where selections are practiced from a variable population and the selected variation needs to be inherited. Three categorized broad goals of plant breeding are 1) high yield 2) uplift in quality and 3) resistance against biotic and abiotic stress.

Spice crops are known to add nutritive value and increase the palatability as well as quality of food. Therapeutic uses of spices are also well recognised. The spice industry in India and trade has shown stunning progress over the last 5 years with 120% increase in revenue which is very close to touch $ 3 billion. East Asia is the major market for spices, followed by America and the European Union and the world spice trade has almost touched $ 17 billion by 2020. So, increased production is of paramount importance across the world and the potential is increasing. On the other hand, quality improvement is one of the primary objectives of spice crop breeding apart from achieving high yield. Cultivar and species diversity are the principal components of diversity of spices (Sasikumar et al. 1999; Krishnamoorthy et al., 1997; Prasath and Venugopal, 2004). A good amount of variability is found in many important Indian spices like black pepper, cardamom, cinnamon, curry leaf, ginger, garcinia, tamarind and turmeric. A number of cultivars have been released followed by intra-germplasm evaluation and selection in spices. Contribution of recombination breeding is less in spice crops with regard to other field crops and a number of valuable varieties have been bred by clonal and seedling selection (Peter, 2008). Deployment of high yielding, water use efficient, climate resilient genotypes and technologies are also necessary.

A. General Morphology

2.1 The Root

It is the organ of a plant that typically lies below the surface of the soil.The root is best defined as the non-leaf, non-nodes bearing parts of the plant’s body. However, important internal structural differences between stems and roots exist. Root spices are, rather surprisingly, rare. Some popular examples of spices having roots are: Apium graveolens (Celery), Armoracia rusticana (Horse radish), Coriandrum sativum (Coriander), Ferula asafoetida (Asafetida), Glycyrrhiza glabra (Licorice), Levisticum officinale (Lovage), (Petroselinum crispum (Parsley), etc. All of the mentioned plants have aromatic roots.Roots of gingiberaceae are adventitious and storage roots arise from among the nodes of these scales.

Since historical times, Indian spices have been contributed not only to the country’s wealth and prosperity but also to the subcontinent itself as a whole. Spices precisely witnessed many wars, bloodshed, armoury alongwith the glowing accounts and adventurous voyage by Pliny, Ptolemy, Marco Polo, Vasco da Gamma and other travelers. The Southern parts of India, especially the Malabar Coast, with its abundance of the World’s best pepper, cinnamon and ginger was enormously creating impact of a plethora of spices which attracted the foreign trade and continue even today by creating a unique brand value globally. In the past, invaders travelled to India by overcoming many odds and barriers with the prime focus on capturing spice trade and dominating the trade scenario of those days throughout the world. As a result, gradually Indian spices travelled far and wide to traditional destinations by providing flavor, aroma, pungency, taste and colour to a variety of foods and beverages.

It was the end of 18^th century, from when scientific research began on the idea of origin of cultivated plants. The pioneers of this field were Darwin, Alphonse de Candolle, N.I Vavilov and many more. Charles Darwin wrote his famous book ‘On the Origin of Species by Means of Natural Selection’, or the ‘Preservation of Favoured Races in the Struggle for Life’ published on 24^th November 1859. According to him, cultivated plants may have originated from its wild form after a series of intense modifications. Afterwards, a Swiss botanist Alphonse de Candolle studied 247 cultivated plant species and documented his work in the book “Origin of cultivated plants” in 1886. Later, Vavilov first identified the Centres of origin. He could determine the origin of plants by analyzing the pattern of variation and proposed that, crop plants have been evolved from their wild species in the geographic region of the greatest genetic diversity of that particular plant. That area is known as the primary centres of origin of the particular plant. But, some crop species were found to show substantial genetic diversity even though they did not originate there. Such areas are known as secondary centres of origin for that particular species.

Cultivated plants in general including the spice crops observed today have been evolved through selections from their weedy and wild types. Apart from this, there had been another force which could bring the wild forms into cultivated forms named human intervention which is actually the process of domestication. Natural mutations and genetic recombination after selfing and crossing also played a significant role in the entire process. Whereas, natural forces take a long time to come into act, the techniques of plant breeding was devised and fine tuned throughout passing of times, essentially to accelerate the speed of evolution using these natural phenomenons. It was, therefore, mandatory for us to know the modes of reproduction and pollination to create variability in natural population and make all thise happen to what we see today in organised cultivated forms. Moreover, knowledge on reproduction of different plant species helps the breeder to choose the right breeding procedure to be used for crop improvement. Modes of reproduction help to evaluate the genetic constitution of crop plants by determining the extent of homozygosity or heterozygosity which, in turn, are unanimously applicable to any plant. To comprehend modes of reproduction in spice crops effectively, understanding about the floral biology is absolutely necessary. Plant reproduction, a process by which one species gives birth to its offsprings, may be of two types

Pollination

Pollination is the act of transfer of pollen from the male reproductive organ of a plant to the female reproductive organ of same or another plant.

Pollination is of two types

5.1 Self Pollination

It is the transfer of pollen from the anther to the stigma of the same flower from where the anthers have been generated. Thus, self pollination happens to be denominated as autogamy where auto means “same” and gamy means “union”. Obviously, self pollination is found in bisexual flowers. But self pollination also occurs when pollen is transferred from one bisexual flower to the stigma of another bisexual flower of the same plant. This kind of autogamy is known as geitonogamy. So, self pollination has to be defined keeping the parent plant on the main focus not the flower. If genetical consequences are considered, self pollination promotes the occurance of purelines or homozygotes. Self pollinating species developed themselves evolutionary fit due to homozygous balance and do not exhibit significant inbreeding depression.

6.1 Introduction

Plant breeding is the indispensible component of elevating production and productivity of spices by evolving high yielding and/or with good quality type. Thereby, the practice of identification and selection of desirable traits and introgression of those characters in a single plant is being done since the beginning of organized agricultural activities by humankind. The act of plant breeding was reshaped and got a momentum with a scientific basis after the discovery and rather rediscovery of Mendel’s laws. Worldwide, humankind could enjoy the direct benefits of methodical plant breeding during green revolution. Manipulation of genetic architecture for creating variation in the population and successive selection is the basic of all kinds of crop breeding. But the process of creation of variability and selection differs from crop to crop depending on their mode of reproduction. It is comparatively easier to get a new homogeneous population in self pollinating plants. Therefore, segregating generations are handled differently in these two categories of self and cross pollinated crops.

7.1 Plant Tissue Culture

Spices have great socio-economic impact in moden food habit of human but loss of resources day by day due to various reasons (industrialization, high population pressure) make the access of these valuable spices limited to people. Low production is general phenomena of common spices due to lack of high yielding varieties. Hence there is a need to improve the propagation method to meet the gap between demand and supply. Conventional vegatative propagation method is common approach for propagation but low multiplication rate, seasonal dependency and susceptible to abiotic stresses and diseases are major problems to achieve the optimum productivity. To overcome these drawbacks scientists have chosen the plant tissue culture technique (a modern approach of biotechnology which deals with the propagation the valuable/endangered plants under laboratory condition). Details about this technique and its role on spices are given below.

Plant Tissue Culture: Basic Components and Objectives

The technique of growing of a whole plant cell, tissue or organ under an aseptic condition in suitable synthetic medium is termed as plant tissue culture (Thorpe, 2007). De-differentiation and re-differentiation are two essential fundamental processes which help in the physio-morphological development of the plant.

8.1 Black Pepper Breeding

Black pepper (Piper nigrum L., family:Piperaceae), known as the ‘King of Spices’ and “Black gold”, is one of the important spices since time immemorial and perhaps the oldest spice regarded globally. It is a perennial climber grown for its fruits that are used as spice with plethora of medicinal properties. Black pepper is also very important in traditional medicine (Ravindran, 2000). However, it is mainly valued for its characteristic pungency and flavour, as an ingredient in food preparations and also as a condiment.

Genetic Resources

World’s largest collection of black pepper germplasm is maintained by the Indian Institute of Spices Research (IISR) at Kozhikode, Kerala, containing local cultivars, wild forms collected from the area of origin and related species. At present there are about 3466 accessions, consisting of 1266 wild relatives, 2062 cultivars, in addition to 9 exotic collections maintained in India. These collections were characterized and evaluated to estimate the genetic diversity for various yield and quality characters. Cultivar diversity is one of the principal components of diversity in black pepper. The cultivars are evolved directly from the wild P. nigrum.

Oilseed Crops consist of those groups of plants cultivated for substantial quantities of the oil, vegetable fat obtained from the seeds (endosperm) of the plants.

The major oilseeds grown world over are soybeans, sunflowers, rapeseed – mustard (or canola in USA & Canada), groundnuts (peanuts) and linseed. Seed oils from flax (linseed) and castor beans are used for industrial purposes. These Oilseed crops including oilseed bearing trees are the basic biological systems that produce oils, contributing to renewable energy production, help stabilize greenhouse gases, and mitigate the risk of climate change (Jaradat, 2016)

The oilseed crops are of heterogeneous group of plant species not having any common morphological and genetic features except production of seed oil. Crops like groundnut, sesame, castor bean, soybean and niger are grown during the rainy season and the others like rapeseed and mustard and safflower are grown in the post rainy season. Sunflower, however, may be grown in both the seasons. Hence the individual crops forming the conglomerate of Oilseed crops have to be treated differently for their improvement and production. Nevertheless, all of them produce a common end product viz., oil or vegetable fat, the importance of which is growing in product development, commerce and human and farm animal nutrition. The oilseed bearing crops have to be treated as a unique group in terms of research and development to come up with strategies for their judicious exploitation in the national farm economy. From the scientific point of view, the oilseed crops are energy rich and offer impressive potentials in terms of realizable production levels and valuable product development. In India good progress has been achieved so far in research and development of some oilseed crops; but there exists a need to scale to newer heights in terms of realising the hidden potentials of oilseed crops through basic and strategic research, with an integrated approach.

Introduction

Groundnut (Arachis hypogaea L.) is an important traditional oilseed crop of India contributing to 3.9 million tons of global vegetable oil ranking the sixth in the sequence of oilseed crops. Added to its importance as an oilseed, groundnut is also an important food legume cultivated in an area of about 22 million hectares worldwide leading to a production of 38.6 million tons as per the FAO statistics of 2011 (ICRISAT, 2017). China and India are the leading groundnut producers followed by USA and Nigeria. Africa with 12.40 m ha area and 11.54 m tons of production, and Asia with 11.87 m ha and 29.95 m tons, together account for 95% global groundnut area and 91% of global groundnut production. There was a substantial increase in global groundnut production by about 5 m tons in 2013, from 40 m tons in 2012. In the last decade, 2004–2013, global groundnut production increased by 24%, contributed by 7% increase in groundnut area, and 16% increase in yield. The projected global demand for groundnut and its related products is expected to increase and so there is a need to further increase production and productivity to meet the demand.

Among the different oilseed crops grown in India, groundnut is the major crops grown in kharif / monsoon season. Among different states if India, Gujarat is the prominent state growing groundnut.

Groundnut has a long history of cultivation since the plant was domesticated and cultivated by the indigenous tribes such as Incas of Peru in South America for more than 1500 years. It is believed that the cultivated groundnut was introduced into India by the Spanish colonizers (Krapovickas, 1968). Groundnut is believed to have been introduced into the USA by the African slaves. Groundnut crop has found an ecological niche in the tropical and warm temperate zones of world, due its impressive adaptability.

Introduction

Mustard and rapeseed crops were grown since 3000 BC in the Indus valley and their use has been mentioned in the Ayurveda Simhata. Use of mustard oil is recorded in the last few centuries of the pre Christian era.

The global production of rapeseed-mustard is at 72 million tons (USDA), while that of the oil is 24 million tons. Currently China is the largest producer of mustard in the world. China, India and Pakistan grow about 90% of the world production of mustard. Rapeseed and mustard form the third important group of oilseed crops in the world after soybean (Glycine max) and palm (Elaeis guineensis Jacq).

The word ‘rape’ and ‘mustard’ have been derived from the word rapum meaning turnip and European practice of mixing the sweet ‘must’ of old wine with crushed seeds of black mustard (Brassica nigra L. Koch) to form a hot paste, respectively (Hemingway 1976). Among the seven edible oilseeds cultivated in India, rapeseed-mustard (Brassica spp.) contributes 26.2% in the total production of oilseeds. In India, the rapeseed-mustard group is the third most important edible oilseed after soybean and groundnut, sharing 27.8% in the India’s oilseed economy. In India rapeseed and mustard are grown during the post-rainy winter season over an area of 7.49 million ha. Around 20% of the total area under rapeseed-mustard in India is totally under dryland cultivation subject to vagaries associated with dryland agriculture.

Introduction

Soybean has earned a place of prominence in world agriculture as one of the most important food crops contributing to protein and oil production. Pertaining to the family Fabaceae, soybean is a legume with over 42% protein and 20% oil in its seeds. The crop fits into the production system of monsoon rainy season of India during the period from June to October and can be grown on wide variety of soils; but performs best on fertile heavier soils of clay and silt.

Soybeans originated in Southeast Asia and were first domesticated by Chinese farmers around 1100 BC. By the first century AD, soybeans were grown in Japan and many other countries. Soybean seed from China was planted by a colonist in the British colony of Georgia in 1765.

Introduction of soybean to Indian subcontinent dates back to 1000 AD through silk route from north-eastern India and Himalayan mountains. The black-seeded soybean has been traditionally grown in North and north-eastern regions of India and further spread to different parts of the country. This black-seeded soybean, Kalitur, was the vehicle for soybean revolution in India. The major initiative on soybean cultivation was undertaken during 1963-64 by G.B. Pant University of Agriculture and Technology (GBPUAT), Pantnagar and JNKVV Agricultural University, Jabalpur in collaboration with University of Illinois, USA. The cultivation has further picked up after the researchers took advantage of yellow-seeded material to develop high-yielding varieties that suited Indian conditions. Soybean cultivation got momentum during the 1970s as the vast monsoon fallow lands of Madhya Pradesh provided appropriate niche for its cultivation. Presently soybean is cultivated on nearly 10 million ha land with likely production of above 10 million tonnes.

Introduction

Cultivated sesame (Sesamum indicum L.), has originated in India (Bedigian,1984; Bedigian et al., 1985; Bedigian and Harlan,1986) and is considered to be the oldest oilseed crop known to man (Ram et al 1990). Archaeological records indicate that it was known and used in India for more than 5,000 years and is recorded as a crop in Babylon and Assyria some 4,000 years ago (Borchani et al., 2010). Sesame crop is being grown in many parts of the world. Sesame seed is an important source of edible oil and is also widely used as a spice and condiment. The seed contains 50-60% oil which has excellent stability due to the presence of natural antioxidants such as sesamolin, sesamin and sesamol (Brar and Ahuja 1979).

Sesamum indicum L., belongs to the family Pedaliaceae, which contains sixteen genera and sixty species under the generic name Sesamum. The other species related to sesame viz., Sesamum angustifolium, Sesamum radiatum and Certotheca sesamoides (false sesame) are cultivated in Africa. The fact that the crop is cultivated in India from times immemorial is testified by the excavations of Harappa and Mohenjo-Daro of undivided India (Watt,1966). The crop was introduced into Brazil by the Portuguese (Weiss, 2000).

World production of sesame seed didn’t show any marked increase for the past three decades, although sesame oil is used largely in Asia and Africa. The current world production of sesame stands at 6.1 million tons as in the year 2016. The sesame production declined world over since the crop had to face a tough competition against other oilseed crops (Weiss, 2000). Most of the world trade on sesame revolves around the seed. The shipments of seed cake and oil are negligible.

Introduction

The Heliantheae are the third-largest tribe in the sunflower family (Asteraceae). With some 190 genera and nearly 2500 recognized species, only the tribes Senecioneae and Astereae are larger. The name is derived from the genus Helianthus, which is Greek for sunflower.

This is one of the large and predominantly flourishing flowering botanical groups occurring in almost all parts of the world. Except for three species in South America, all other Helianthus species are native to North America and Central America i.e., Southwest United States-Mexico area (Heiser, 1976). The common name, “sunflower”, typically refers to the popular annual species Helianthus annuus, or the common sunflower, whose round flower heads in combination with the ligules look like the sun. This and other species, notably Jerusalem artichoke (H. tuberosus), are cultivated in temperate regions and some tropical regions as food crops for humans, cattle, and poultry, and as ornamental plants.

The species H. annuus typically grows during the summer, post summer rainy season and later in post-rainy season too with the peak growth during pre-summer season with temperatures ranging from 28^oC to 35^oC in India.

Domestication of sunflower started around 4,000 years ago in Eastern North America by the native tribes of American continent (Blackman et al., 2011). The current annual oilseed yielding sunflower was cultivated originally by local inhabitant tribes (Weiss, 2000), who used the seed as a source of food. The adaptations in annual sunflower to human cultivation include a dramatic increase in apical dominance, an increase in seed size, the loss of natural seed dispersal and seed dormancy, and the loss of self-incompatibility (Wills and Burke, 2007).

Introduction

Safflower belongs to the family Asteraceae, which is also called Compositae, the aster, daisy, or composite family of the flowering-plant order Asterales.tribe Cardueae (thistles) and subtribe Centaureinae . With more than 1,911 genera and 32,913 accepted species of herbs, shrubs, and trees distributed throughout the world, Asteraceae is one of the largest plant families. The species of the family are annuals and perennials of worldwide distribution, consisting of ornamentals, vegetables and spice or medicinal plants.

The genus Carthamus L., contains about 25 valid species distributed from Spain, North America and West Asia to India. Many are indigenous to the Mediterranean region, but only one viz., Carthamus tinctorius L. (safflower) is cultivated for oil. Safflower is a diploid species (2n=24). The probable origin of cultivated safflower is the area bounded by the Eastern Mediterranean and the Persian Gulf.

Safflower is grown as edible oil crop in pots, as strip crop, on field borders or around home-steads in the tropical Asia, Africa, Russia and China. Safflower is more drought resistant than other oilseed crops and can yield well on drylands, exploiting sub-soil moisture. (Lovelli et al., 2007). Safflower is also salt tolerant and can be grown on soils affected by some degree of salinity (Bassil and Kaffka, 2002).

The safflower plant has a history of long domestication, initially for orange red dye obtained from florets of the plant. The plant was identified as growing in Egypt in 2000 BC, introduced from Euphrates (Weiss, 2000). Safflower oil has unique variation in fatty acid composition (Knowels, 1969). In general, linoleic acid is the dominant fatty acid ranging from 70 to 78% in local types. In improved types oleic acid ranges from 70 to 75%.

Introduction and History

Niger, Guizotia abyssinica (L.f.) Cass. [Asteraceae] is commonly known as nigerseed [English]; noug, guizotia oléifère [French]; verbesina da Índia, abisin, negrillo, ramtilla [Spanish]; ramtil, nigersaat [Dutch]; [Amharic];[Chinese]; Ram-til[Hindi]; Gurellu [Kannada]; Verri-nuvvulu (Telugu) Karalle[Marathi] and Jhusetil [Nepali] Niger’s other synonym is Guizotia oleifera DC., Polynya abyssinica L. f.

Niger (Guizotia abyssinica (L. f.) Cass.) is an oilseed crop cultivated in Ethiopia and India for its edible oil. Niger plant is originated in highlands of Northern Ethiopia (Weiss, 2000). The crop is reported to have been introduced into India from Ethiopia during around2000BC. The Ancient Agau people of Ethiopia had a well-developed agriculture, who traded with Egypt which facilitated the exchange by barter that included Niger too (Weiss, 2000). Currently, Niger is an important oilseed crop of Ethiopia. Ground niger seeds and chillies are the main components of the traditional stew known as wat of Ethiopia. Niger is the most important oilseed crop of Ethiopia contributing to 50% of the country’s oilseed production. Although the crop is grown throughout the country, the main production centres are Begemdir, Gojam and Welaga (Weiss, 2000). Since the Ethiopian government actively supports the oilseed industry, production was on steady increase till 1974. With the fall in the production post-civil war in 1974, most of the niger produced is consumed domestically and the exports got dwindled.

Introduction

Flax (Linum usitatissimum L.), also known as common flax or linseed, is a member of the genus Linum in the family Linaceae. Linseed is an annual oil crop that is grown either for its fibre (fibre flax) or for its oil. The area under annual cultivation is 3 million hectares, accounting for 1% of the total world production of plant oil. The five major flax-producing countries are Canada, China, India, the United States, and the European Union.Canada with 614,000 metric tonnes of flaxseed produced in the year 2013-2014, is the world’s largest producer of flax and accounts for nearly 80% of the global trade in flaxseed (Oomah 2001; Bhatty, 1995)

Flaxseed, of Mesopotamic origin, has been cultivated in Mediterranean region and India since 5000 BC, being used principally for the fabrication of cloths and papers (Soni, et al., 2016).

With the adoption of cotton as a fibre crop for cloth preparation, fibre flax production declined and the major use of flax was switched from stem fibre to seed oil. It is a food and fibre crop cultivated in cooler regions of the world. Textiles made from flax are known in the Western countries as linen, and traditionally used for bed sheets, underclothes, and table linen. Its oil is known as linseed oil. In addition to referring to the plant itself, the word “flax” may refer to the unspun fibres of the flax plant. The plant species is known only as a cultivated plant and appears to have been domesticated just once from the wild species Linum bienne, called pale flax. (Allaby et al.,2005). Fibre flax is currently grown in the cool-temperate regions of China, the Russian Federation and Western Europe while linseed cultivars are grown in Canada, India, China, the United States and Argentina (Green et al., 2008).

Introduction

Castor plant (Ricinus communis L) is an age old crop of India which has been in use in Ayurvedic medicine since 2000 BC, when the oil was used in lamps and also in local medicine particularly as a laxative and also to cure arthritis. The seeds of the crop yield non-edible viscous oil which has a number of applications in industry apart from its medicinal properties, which are well documented in Ayurvedic, Siddha and Unani medicine. The word Ricinus in the scientific name of the castor plant has cropped due to the appearance of its seed resembling dog’s tick!

Castor is cultivated on commercial scale in an area of 1,296,855 ha in 30 countries with global castor seed production at 1,396,104 MT (FAO STAT, 2019). India is the world’s single largest producer of castor seed accounting for more than 85% followed by China with about 7% and Brazil with about 5% of world castor seed output. There has been a consistent increase in output primarily on account of rise in yield levels in India. In recent years, however, Brazil and China have experienced stagnation in castor crop. Castor is widely grown in Ethiopia too. Among oilseed crops of India, castor crop has registered positive and high growth rate along with soybean (Mohapatra 2017).

Introduction

Indian oilseeds scenario has been able to surmount the crisis of prolonged stagnation with increased production in the decades of 1980s and 1990s (Prasad 1991). Nevertheless, in the face of growing demands of vegetable oil both for human consumption and industrial use, there is every need to augment the oilseed production to new heights of sustainability (Prasad 1994a).

Apart from the traditional sources of vegetable oils from annual crops like groundnut, rapeseed-mustard, sesame, sunflower, safflower, niger, linseed, castor and soybean besides cotton seed and rice bran, more than 100 species of domesticated or wild plant species of India are known to contain oil in considerable quantities (Prasad, 1994c). In addition to the production from nine traditional oilseeds mentioned above, 3 million tonnes of vegetable oil is being harnessed from secondary sources like cottonseed, rice bran, coconut, Tree Borne Oilseeds (TBOs) and Oil Palm. Subramanian et al., (2005) reported that there are over 300 different species of trees which produce oil bearing seeds. Thus, there is a significant potential for non-edible oil source from different plants for biodiesel production as an alternative to petrodiesel.

It is estimated that TBOs have the potential to contribute more than 3 million tons of oil; but only a fraction of the potential is realised currently. Seeds of many of the oil bearing trees have been used by the ethnic communities for different purposes. Apart from seed oil, the trees yield valuable by-products including cake, which have industrial applications (Hocking, 1993; Chakravarty et al., 2012).

There are many species of plants found wild or cultivated inside as well as outside the forest areas containing sizeable amount of vegetable oil having domestic and industrial utility. Out of these species.The country has enormous potential of oilseeds of tree origin like Mahua (Madhuca indica and M. longifolia ), Sal (Shorea robusta), Neem (Azadirachta indica), Simarouba (Simarouba glauca), Karanj (Pongamia pinnata), Ratanjyot /physic nut (Jatropha curcas), Jojoba (Simmondsia chinesis), Cheura (Diploknema butyracea), Kokum (Garcinia indica), wild Apricot (Prunus armeniaca), wild Walnut (Aleurites molucana), Kusum (Schleichera oleosa), Undi ( Calophyllum inophyllum), Tung (Verniciafordii) etc. which can be grown and established on the wastelands and under varied agroclimatic conditions.

In recent years, oilseed crops are being increasingly exploited for production of pharmaceuticals, surfactants, plasticisers, emulsifiers, detergents, lubricants, adhesives, cosmetics, oleo-chemicals, biofuels apart from their demand for their healthy vegetable oils and livestock feeds (Metzger and Bornscheuer, 2006). The increased interest resulted in an 82% expansion of oilseed crop cultivation areas and about a 240% increase in total world production over the last 30 years (Rahman and Jimenez., 2016).

1.1 Introduction

Irrespective of caste, creed, culture, sex, age or religion people like garden. A well-maintained garden serves as lungs of the city or locality as it is a prime source of plenty of oxygen and people enjoy the surrounding and feel happy by fresh air. In holy books of Hindu religion, the importance of plants as well as gardens are explained very beautifully. In the holy Bible it is mentioned that Adam and eve lived in garden. In Quran it is explained as the paradise on earth. So, scriptures of all religions explain about gardens. It shows gardens and plants are closely related to human from the origin of human belief.

2.1 Introduction

Generally, gardens are divided into different sections as per the rules and regulation followed in the placement of different elements and features in it. On the basis of this garden types are divided into 4 categories such as

3.1 Introduction

Many gardens follow strict rules. So those are known as formal gardens. Generally formal gardens include:

Italian gardens

French gardens

Persian gardens

Mughal gardens

4.1 Introduction

Many styles of gardens do not follow strict rules and so those are known as informal gardens. Some gardens evolved as informal garden in due course of time as per the choice of people but some gardens are informal in nature from origin. Informal gardens are:

English garden

Japanese garden

Hindu garden

Buddhist garden

5.1 Elements of Landscape Gardens

5.1.1 Introduction

Elements of a garden are the basic units of any visual design which form its structure and convey visual messages. Elements are based on the art principles of landscaping. Process of landscape design includes concepts and elements of landscape designing. Generally, elements of a garden are divided into 2 types

6.1 Introduction

Garden design encompasses the aesthetic beauty, artistry, knowledge of plant growth and development with basic maintenance of plants and other elements as required. Principles are the basic rules of designing a landscape. The basic principles of garden design are very simple; however, each is often referred to by more than one name. Principles of landscape garden keeps the garden lively and beautiful. The principles of gardening should be kept in mind always while designing a garden.

6.2 Axis

It is an imaginary line in landscape designs around which the garden is created striking a balance. In a formal garden the central line is the axis.

7.1 Introduction

Garden designing is an important and crucial step as whole aesthetic view of the garden depends upon it. A beautifully designed garden can attract plenty of viewers as well as fauna while a poorly designed garden can destroy the view of the garden as a whole. So, while designing a garden all the basic principles and elements of gardening should be kept in mind.

7.2 Steps in Preparation of Garden Design

Site identification

Generally, the site for garden development is provided by the client itself. So, in this case we should go for site analysis step directly. Site identification is always a choice of client/human. If landscape architect has liberty to identify a land for garden establishment, he should identify the site as per choice of the client, usage and special considerations of the client.

8.1 Introduction

One important aspect of bio-aesthetic planning is to landscape public places on a priority basis compared to private places. For this specific reason, the railway station and the railway lines should attract attention at the very outset for landscape gardening.

8.2 Definition

Bio-aesthetic planning means the proper utilization of the available flora and fauna in the beautification of the surroundings. The concept of bio-aesthetic planning is given by concept of Prof. Lancelot Hogben.

In India, the theme of bio-aesthetic planning was propagated by Dr. M. S. Randhawa. Le Corbusier and his associates, Pierre Jeanneret, E. Maxwell Fry and Jane B. Drew had planned Chandigarh city as per the principles of bioaesthetic planning.

9.1 Introduction

Xeriscaping is the fine art of creating water-efficient landscapes by using plants that are appropriate to the natural environment. Xeriscaping (zer-i-skaping) is a word originally coined by a special task force of the Denver Water Department, Associated Landscape Contractors of Colorado and Colorado State University to describe landscaping with water conservation as a major objective. The derivation of the word is from the Greek “xeros,” meaning dry, and scape meaning the pattern of the landscape – thus, xeriscaping. The term xeriscaping represents a practice or philosophy with the goal to establish and maintain an attractive and healthy landscape while reducing water usage. One of the prime practices in xeriscaping is the use of drought tolerant plants, but xeriscaping is more than that. It also includes changes in the landscape design, soil improvement, efficient irrigation, mulching, and other maintenance practices which contribute towards a water-wise landscape. But xeriscapes are not dry and dull. Well-designed xeriscapes are enchanting and beautiful. The best xeriscapes use a fraction of the water needed by traditional lawn-dominated landscapes. Some xeric plants require little or no supplemental watering once they are established. And xeriscapes require far less ongoing maintenance.

1.1. Plant Quarantine

The literary meaning of the word quarantine is” a state, period or place of isolation in which the people or animals or plants or acquacultures that have arrived from elsewhere or been exposed to infectious or contagious disease are placed.

Plant quarantine is a technique of keeping the imported or introduced plants or planting material in isolation for detecting the exotic pests, diseases and disease pathogens and weeds which may be harmful to the importing country for its crop plants, agriculture or the ecosystem. These plants/planting material are kept in isolation for a specified period which differ from plant species to plant species depending on the type of pathogen/pests for which the material has to be quarantine. This is based on the Rules and regulations promulgated by governments to regulate the introduction of plants, planting materials, plant products, soil, living organisms, etc. with a view to prevent inadvertent introduction of exotic pests, weeds and pathogens harmful to the agriculture or the environment of a country/region, and if introduced, to prevent their establishment and further spread. Plant quarantine is thus designed as a safeguard against harmful pest /pathogens exotic to a country or a region.

Plant quarantine is a most important activity in the introduction of plants and planting material as various insects, including mites and nematodes and diseases caused by fungi, bacteria, viruses, viroids, phytoplasmas,rickettsialike organisms are known to attack various crops of economic importance to not only reduce the quantity but also spoil the quality of the produce to a considerable extent and if these pests and pathogens are introduced with the planting material in its non ecosystem areas may prove fatal to the agriculture or ecosystem

2.1. Guidelines for Pest Risk Analysis

This standard describes the process of pest risk analysis for plant pests for the purpose of preparing phytosanitary regulations by National Plant Protection Organizations. Pest risk analysis (PRA) consists of three stages: initiating the process for analyzing risk, assessing pest risk, and managing pest risk.

Initiating the process involves identification of pests or pathways for which the PRA is needed. Pest risk assessment determines whether each pest identified as such, or associated with a pathway, is a quarantine pest, characterized in terms of likelihood of entry, establishment, spread and economic importance. Pest risk management involves developing, evaluating, comparing and selecting options for reducing the risk.

PRA is only meaningful in relation to a defined “PRA area” considered to be at risk. This is usually a country, but can also be an area within a country, or an area covering all or parts of several countries [e.g. the area covered by a Regional Plant Protection Organization (RPPO)].

3.1. What is the International Plant Protection Convention (IPPC)

The International Plant Protection Convention (IPPC) is a 1951 multilateral treaty deposited with the Food and Agriculture Organization of the United Nations (FAO) that aims to secure coordinated, effective action to prevent and to control the introduction and spread of pests of plants and plant products. The Convention extends beyond the protection of cultivated plants to the protection of natural flora and plant products. It also takes into consideration both direct and indirect damage by pests including weeds.

The IPPC as an intergovernmental treaty signed by over 180 countries, aiming to protecting the world’s plant resources from the spread and introduction of pests, and promoting safe trade. The Convention introduced International Standards for Phytosanitary Measures (ISPMs) as its main tool to achieve its goals, making it the sole global standard setting organization for plant health.

The IPPC is one of the “Three Sisters” recognized by the World Trade Organization’s (WTO) Sanitary and Phytosanitary Measures (SPS) Agreement, along with the Codex Alimentarius Commission for food safety standards and the World Organization for Animal Health (OIE) for animal health standards.

In Article IX of IPPC, it is stated that RPPOs shall

• Function as coordinating bodies in the areas covered by the IPPC (including information sharing)
• Cooperate with the IPPC Secretariat in achieving the objectives of the IPPC (including the development of ISPMs)
• Cooperate with other RPPOs and participate in the regular Technical Consultations for RPPOs that are convened by the IPPC Secretariat

At present, there are 10 RPPOs covering the different regions of the world. Each RPPO has its own independent statutes and conducts its own regional cooperation programme. RPPOs produce regional standards for their members. They cooperate with each other and with the IPPC Secretariat. In particular, they meet in Technical Consultations to promote the development and use of relevant ISPMs and to encourage inter-regional cooperation on phytosanitary measures for controlling quarantine pests and preventing their introduction and spread.

5.1. Australia’s Experience and Approach to Pest Risk Analysis

Australia applies the principles of pest risk analysis for the identification and management of sanitary and phytosanitary risks associated with new trade proposals and, where the need is identified, to the review of sanitary and phytosanitary risks of existing trade. One such trade activity is the intentional importation of exotic plant species not yet established in Australia.

Of approximately 250 000 plant species in the world, 30 000 have been intentionally introduced to Australia since European colonization, along with an unknown number of unintentional introductions, of which about 2 700 have naturalized (Cunningham et al., 2003). Some become problematic plants of which about 300 have become serious weeds of agriculture and natural ecosystems. Clearly, the majority of plant species have yet to be introduced to Australia and some of these would become weeds if allowed into the country.

The weed risk assessment (WRA) system is a decision support tool that is employed by Australia in applying the principles of pest risk analysis to the review of sanitary and phytosanitary risks associated with the intentional importation of exotic plant species not yet established in the country. The WRA system is used specifically to assess the weed potential of such species. It generates a score for a species based on its history as a weed in other parts of the world, climatic suitability to Australia and biological attributes. The weed risk assessment (WRA) system is one means by which the assessment component of pest risk analysis is addressed. The WRA system is a question-based scoring method that can be operated using a computer or manually using paper-based forms. A Microsoft® Excel spreadsheet version of the system, including documentation, has been made available through the International Phytosanitary Portal

6.1. Speed Detection of Pests in China for Phytosanitary Programme

Phytosanitary procedures such as pest detection and identification rely on technology. With the rapid development of science, it is necessary for national plant protection organizations to keep informed and to make diagnoses more sensitive and accurate. Previous general pest detection methods frequently have limitations for the diagnosis of quarantine pests. In the past ten years, China has conducted considerable research into how to improve its diagnostic measures and methods.

6.1.1. General Pest Detection Measures and Methods

Traditional determination of morphology by microscope is used mostly to detect fungi and adult insects. The morphological method may be used, for example, in the separate identification of wheat dwarf bunt (Tilletia controversa), wheat karnal bunt (T. indica) and wheat common bunt (T. tritici). On the other hand, it is hard to detect seed-borne pests using the morphological method.

Isolation culture is also used to detect fungi and bacteria in China. It is an effective method for detecting seed-borne disease or systemic infection. However, it takes a long time (more than 1-2 weeks). Inoculating the indicated plant (a healthy plant that is a host for the suspected pest organism) is used mainly to identify viruses. This was the principal and time-consuming detection method used before immunological and molecular biological methods were developed. Because viruses are very important kinds of quarantine pests of young plants, effective and rapid methods for detection were urgently needed.

7.1. BioNET International

7.1.1. What is BioNet International

BioNET-International, is the Global Network for Taxonomy, and is dedicated to creating sustainable mechanisms to assist developing countries to overcome the Taxonomic Impediment by becoming self-reliant in taxonomy i.e. self-reliant in the skills, infrastructure (collections etc.) and technologies needed to discover, identify, name and classify and to understand the relationships of all organisms on this planet.

It is concerned with helping developing countries to recognise and know the organisms that constitute and threaten their biodiversity, not for taxonomy’s own sake, but rather to support national programmes for sustainable agricultural development, and conservation and sustainable use of the environment.

BioNET-International is particularly focused on helping countries implement the various environmental conventions such as the International Plant Protection Convention (IPPC; www.ippc.int) and the Convention on Biological Diversity (CBD; www.biodiv.org), especially its taxonomic capacity building compnent, the Global Taxonomy Initiative (GTI). The subregional networks of BioNET-International have been identified as appropriate structures through which much of the GTI (www.biodiv.org/programmes/cross-cutting/taxonomy/default.asp) can be effectively implemented.

8.1. Phytosanitary Capacity Evaluation (PCE): The Tool, and Its Relation to Invasive Alien Species

Phytosanitary Capacity Evaluation (PCE) is a diagnostic tool enabling a country to assess the weaknesses and strengths of its phytosanitary system in relation to its ability to fully implement the International Plant Protection Convention and other international phytosanitary obligations. PCE has also been applied as a cross-disciplinary tool among the sanitary, phytosanitary and food safety areas in the Andean subregion. Since “quarantine pests”, as defined by the convention, constitute a subset of invasive alien species, PCE results are already useful in relation to invasive alien species. PCE methodology has the potential to be further developed to cover a country’s needs in implementing Article 8(h) of the Convention on Biological Diversity.

Article XX of the International Plant Protection Convention establishes the agreement by contracting parties to promote the provision of technical assistance to facilitate implementation of the IPPC. Phytosanitary Capacity Evaluation (PCE) is the first tool approved by the Interim Commission of Phytosanitary Measures to address that commitment, assisting contracting parties to perform a needs assessment and identification of their constraints for achieving full implementation of the IPPC at the national level.

Classical biological control is one of the important tools for the management of invasive species. This involves the introduction and release of natural enemies, usually from the invaders’ area of origin. During the past decade, increasing concerns have been raised about the potential negative impact of introduced biological control agents on non-target organisms. This has highlighted the need to examine and guide the process of importation and release of natural enemies. The third international standard for phytosanitary measures, ISPM 3: Code of conduct for the import and release of exotic biological control agents, is specifically concerned with this process. ISPM 3 was endorsed by members of the Food and Agriculture Organization of the United Nations in 1995.

There is a growing demand and need for biological control across the globe. This has been fuelled not only by the increasing spate of invasive species but also by the need to develop integrated pest management approaches as well as the increased interest in organic production. Classical biological control of arthropod pests and weeds has been carried out successfully for more than a century (Greathead and Greathead, 1992; Julien and Griffiths, 1998). However, over the years, practitioners have become increasingly aware that introduced biological control agents may have undesirable side-effects (Thomas and Willis, 1998; Howarth, 2000; Follet and Duan, 2000; Lynch and Thomas, 2000; Wajnberg, Scott and Quimby, 2000; Henneman and Memmott, 2001). Initially, this concern was limited to the possible impact of these introduced agents on economically important plants and insects (notably, honey bees, silk moths and weed biological control agents). More recently, increased environmental awareness has drawn attention to the potential danger to all indigenous fauna and flora, particularly rare and endangered species.

To address these concerns, a code of conduct for the import and release of exotic biological control agents was developed with a view to fostering safe importation and release of biological control agents (Greathead, 1997). It was developed over a period of six years and was finally endorsed by FAO member countries at the end of 1995. The code of conduct, the third in a series of international standards for phytosanitary measures developed by the International Plant Protection Convention, was formally published in 1996 as ISPM 3: Code of conduct for the import and release of exotic biological control agents and is available, with other ISPMs