eChapters

Agricultural production in India is still vulnerable to vagaries of monsoon rainfall in spite of rapid technological advancements like 1) Availability of high yielding varieties 2) Improved crop management practices and increased irrigation availability and effective control of pests and diseases and etc, over last few decades. Majority of Indian farming community which broadly comprising of small and medium farmers are often subject to climate extremes such as droughts, floods, heavy rainfall events, heat and cold waves, frost, hail storms during the crop growing season. The probabilities of occurrence of such climate extremes and associated crop damages and production losses are common in tropical countries like India. Compensation to the resource crunched farmers in the form of crop insurance seems to be the best option for speedy recovery from the losses incurred during the season. It provides security and stability to farm income by protecting the farmers’ investment in crop production and then improves their risk bearing capacities. Crop insurance scheme is based on the fundamental principle of insurance business in which risk is distributed across space and time. For successful implementation of any crop insurance scheme operating presently in the country, proper monitoring of accurate weather parameters at the identified locations throughout the crop life cycle is important. Since these ongoing schemes requires recording weather data right at the locations the existing weather network stations operated by the national agencies which are mostly located at the district head quarters are not adequate to cover the entire cropped areas, where crop is grown and insured. In order to avoid such difficulty, the government allowed few private entrepreneurs for monitoring and supply of daily weather data of high quality by adopting strictly the norms laid out by world Meteorological Organization (WMO) and India Meteorological Department (IMD). The process of monitoring,collection and supply of weather data to the insurance companies on a regular basis involves the following:

• The seed production of varieties and hybrids should be carried out carefully by following various techniques in the region where they are well adopted.
• The various factors affecting quality seed production includes,
  1. Agro climatic factors / Ecological factors - edaphic and climatic factors
  2. Production factors
  3. Post harvesting handling of seed
  4. Seed quality control factors

Seed Processing

Seed processing may be understood to comprise all the operations after harvest that aim at maximizing seed viability, vigour and health. It includes cleaning, drying, seed treatment, packaging and storage.

Seed Health Testing

Science of determining the presence or absence of disease causing agents such as fungi, bacteria and viruses and insects in the seed samples.

Seed Borne disease

The seed primordial or the maturing seed may be infected either (i) directly from the infected plant through the flower or fruit stalk and the seed stalk or directly from the seed surface, or (ii)infection from outside may be introduced through stigma or ovary wall or pericarp, and the flower or fruit stalk, and later through the seed coat. A pathogen may penetrate several of these parts of the seed and in turn infect them. The infestation /contamination of the seed may occur during harvesting, threshing and processing. Visualizing the importance of seed borne diseases the Central Seed Certification board has prescribed certification standards for foundation and certified seed for several diseases.

The pathogen may carry with the seeds in three ways.

• Admixture: Pathogens are independent of seeds but accompany them. They are mixed with health seeds during threshing.
• External:The pathogen may be present on seed surface as spores, oospores and chlamydospores.
• Internal: Pathogens establish within the seed with definite relationship with seed parts.

Pesticides offer one of the best means of controlling plant diseases and pests and subsequently improving the yield. They have been used since the 19^th century. Pesticides, undoutly are poisonous and their indiscriminate use and abuse may result in ecological imbalance resulting in pest resurgence, aggravation of minor pest, pesticides resistance, environmental pollution, poising serious health hazards to man and animals. However, if used judiciously, following the guide line of Pesticide Action Network (PAN), such problems are not likely to occur, and instead improve crop yield. It is however unfortunate that many of us really lack the insight in Materia Medica of plant diseases and pests and most of the problems have occurred due to misuse and abuse of pesticides for which man is responsible and not the pesticides.

Definition

“Biological pesticides”, or “Biopesticides” as the name suggests, are naturally occurring substances that biologically control harmful pests, especially among field crops. These are naturally produced bio chemical materials basically non-toxic to the environment that can be employed in pest control. Biopesticides could mean living organisms (bacteria, virus, and algae), their products (biochemicals produced by them) and also plant byproducts. Biopesticides offer an ecologically effective solution to the harmful effects of synthetic pesticides.

Definition

Seed treatment is the process by which seeds are treated with physical, chemical or biological agents to prevent the infection of seedlings and the subsequent development of the crops.

Advantages of Seed Treatments

Increased seed germination.

Ensures uniform seedling emergence.

Protect seeds or seedling from early season diseases and insect pests improving crop emergence and its growth.

Lower seedling mortality.

Improved plant population and thus higher productivity.

Reduces the cost and the potential environmental impact.

Also reduces the probability of chemical residues in harvested grain.

Relatively easy and cheap to apply compared to broadcast sprays.

Introduction

The semiarid and arid ecosystem is not only neglected in India but also the whole world in respect of socio-economic and scientific development. Middlefon and Thomas, 1997) reported the arid and semi arid covers 47% of land surface of the plant and home town to 1/3 of human population. Conventional plant breeding so far only increased the yield of crops grown under arid tropics at about half the rate achieved for crops grown in temperate regions (Turner, 2004, b). The major crop of other ecosystem are considered as under exploited crop of arid ecosystem. Tomato (Lycopersicon esculentum Mill.), is one such crop, which was domesticated in ancient Peru, has become the most popular and widely consumed vegetable in the world today, for its rich flavor and high nutritional value (Vitamins A and C)

Introduction

Antioxidants are substances, which retard or prevent deterioration, damage or destruction caused by oxidation. Fortunately, the body has an army of antioxidants for damage limitation. Antioxidant form an integral part of the nutraceutical market. During the last few years’ research has confirmed that many have the common disease and ailments of 21^st century (Coronary Vascular Disease, diabetes, cataracts, high blood pressure, infertilities, respiratory infection, and rheumatoid arthritis) are associated with tissue deficiency and/or low dietary levels of compounds called antioxidants. The oxygen is consumed in the body during metabolism by process called oxidation. During oxidation free radicals are generated. These free radicals at a molecular level burn everything they touch. Antioxidants are power full electron donors and react with free radicals which damage the biomolecules. The formed antioxidant radical is stable and non-reactive. Antioxidants are quite large in number and diverse in nature which oppose the process of oxidation largely by neutralizing free radicals at relatively small concentrations and also have the potential to inhibit the oxidant chain reactions.

Introduction

Phytosterols, phytostanols and their esters are a group of steroid alcohols and esters that occur naturally in plants as nonsaponifiable fraction of plant oils. Phytosterols (including plant sterols and stanols) cannot be synthesized by humans, and all plant sterols and stanols in the human body therefore originate from the diet. They are known to have several bioactive qualities with possible implications for human health. Their properties for reducing blood cholesterol levels, as well as their other beneficial health effects, have been known for many years. It was recognized in the 1950s that plant sterols lower serum concentrations of cholesterol. Plant sterols might also protect against certain types of cancer such as colon, breast and prostate. Scholarly reviews have all confirmed the health benefits and safety of phytosterols.

People with high blood cholesterol levels are typically advised by health professionals to exercise and consume a diet high in fiber and low in saturated fats and cholesterol. Although these measures can reduce blood cholesterol, sometimes they don’t go far enough. Other cholesterol-lowering interventions may be needed, including cholesterol-lowering medicines or adding phytosterol esters to the diet. The primary phytosterols in the diet are sitosterol, stigmasterol, and campesterol and typical consumption of plant sterols is approximately 160 – 400 mg/day. The enrichment of foods with phytosterols is one of the recent developments in functional foods to enhance the cholesterol-lowering ability of traditional food products.

Introduction

Foods and nutrients play a vital role in normal functioning of the body. They are helpful in maintaining the health of the individual and in reducing the risk of various diseases. Nutraceuticals and functional foods are broad terms describing “a food (or part of a food) that provides medical or health benefits, including the prevention and/or treatment of a disease”. Nutraceuticals hold promise in clinical therapy as they have the potential to significantly reduce the risk of side effects associated with chemotherapy along with reducing the global health care cost. Food provides not only essential nutrients needed for life but also other bioactive compounds for health promotion and disease prevention. Consumption of fruit and vegetables, as well as grains, has been strongly associated with reduced risk of cardiovascular disease, cancer, diabetes, Alzheimer disease, cataracts, and age-related functional decline. A change in dietary behavior such as increasing consumption of fruit, vegetables, and grains is a practical strategy for significantly reducing the incidence of chronic diseases.

Functional foods that contain significant amounts of bioactive components may provide desirable health benefits beyond basic nutrition and play important roles in the prevention of chronic diseases. The key question is whether a purified phytochemical has the same health benefit as does the whole food or mixture of foods in which the phytochemical is present. Technological progress in manipulating plant metabolism and metabolites, combined with the explosive growth of the “functional food” industry has led to many attempts to enhance the concentration of these health-promoting compounds in specific plant-based foods . “Functional foods” are foods that, by virtue of physiologically active components, provide a health benefit beyond basic nutrition”. Functional/medicinal food is a category of botanical therapeutic available at the grocery store, which can be decrypted as “food engineered or supplemented to provide health benefits”. Thus, the future of plant-based functional foods seems bright and, as a result, grocery and drug stores might eventually look very similar. Optimization of composition of fruits and vegetables would be a very cost-effective method of disease prevention, since diet-induced health improvements would not carry any added costs for the health sector.

Introduction

The primary role of the diet is to provide enough nutrients to meet metabolic requirements while giving the consumer a feeling of satisfaction and well being. Beyond meeting nutrient needs, diet may modulate various functions in the body and may play detrimental or beneficial roles in some diseases. Now a days concept in nutrition is expanding from the past emphasis on survival, hunger satisfaction and preventing adverse effects to an emphasis on the use of foods to promote a state of well being and better health and to help reduce risk of diseases.

In recent years, the words like functional foods, nutraceuticals, phytochemicals are frequently used/found in media. It is important to understand these words and understand their functions in health care.

Introduction

Microencapsulation is a process of entrapping solid particles, liquid droplets or gases in thin polymeric coatings. The outer film (wall) protects the encapsulated material (core) and allows for its controlled release. Application of this technique is wide spread in several industrial fields, including the manufacture of foods, pharmaceuticals, cosmetics and pesticides. Common food ingredients subjected to microencapsulation include probiotic bacteria, acidulates, flavours, colours, sweeteners, minerals and vitamins. A number of coating materials are employed in production of microcapsules, such as gums, starch, and starch derivatives, cellulosic materials, lipids, proteins and inorganic materials.

Actually the development of the formation of micro-encapsulates was partially inspired by the nature. Eggs, seeds, grains, nuts, fruits etc. are typical examples of the food encapsulation and natures own way of conserving and protecting natural products against its own deteriorating elements. Taking clue from this, man adopted this technology of protection of some of the foodstuffs as sauces, puddings etc. Microencapsulation can improve the convenience of food. The shell provides a barrier between reactive components (for instance, delaying the release of leavening agents for fluffier bread products or protecting oxygen-sensitive materials during processing and storage). Microcapsules can help fragile and sensitive materials survive processing and packaging conditions and stabilize the shelf-life of the active ingredient.Karel (1994) described various methods of encapsulation of food ingredients.Inaddition, microencapsulation can simplify the food manufacturing process by converting liquids to solid powder, decreasing production costs by allowing batch processing using low-cost, powder-handling equipment. To improve food safety, the technology can be used to indicate product tampering, thermal spoilage, and freeze-thaw cycles.

Introduction

“The World Packaging Organisation’s (WPO) slogan, “Better Quality of Life Through Better Packaging”, sumps up the important place that packaging occupies in a modern economy.

As the economics of many countries are increasing, the consumers have started using more processed food. As a matter of fact global food processing and packaging business has reached to multi trillion dollars. In today’s world of global markets and stiff competition in every product along with increasing consumer demand, it becomes imperative for companies to explore ways to improve their productivity in terms of maintaining safety, using sustainable packaging materials, implementing flexible and standardized technology, and adopting proven management. Towards this end, companies have been striving to improve the efficiencies of their operations through improvements in the processes. Reducing wastes and shortening lead times becomes all the more imperative in the food industry due to the perishable nature of the product. Moreover, recent advances in technology such as Radio Frequency Identification (RFID) and nano-materials afford companies greater opportunities to streamline the processing, packaging, and manufacturing schemes.

Feed accounts for a significant cost of production in livestock and poultry. In case of poultry, it represents 65% cost of the production in broilers and 75% in layers. Presently the live stock industry faces a huge challenge due to the high cost of feed ingredients and shortage of the conventional feed ingredients. Over the years, efforts have been made to use unconventional feed ingredients. However, such feed ingredients have many anti nutritional factors that adversely affect the performance of livestock and poultry. Due to the presence of these incriminating factors, the unconventional feed ingredients are poorly digested in livestock and poultry. These poorly digested feed ingredients results in bacterial overgrowth, which becomes a potential substrate for bacterial fermentation leading to intestinal disorders and disease. Application of antibiotics and other anti-microbials help to overcome the ill effects. However, the ban on the use of sub therapeutic level of antibiotics in many countries has increased the relevance of use of exogenous enzymes in the feed of livestock and poultry. These exogenous feed enzymes improve the nutritive value of different feed stuffs, economize livestock and poultry rearing and reduce environmental pollution.

Introduction

Seed pathology has been recognized as its own specialization for a relatively brief time, and the term “Seed Pathology” was first coined by Mary Noble in the 1940 (Agarwal and Sinclair, 1997). Seed pathology is an essential part of seed technology as well as a sub discipline of plant pathology. According toAgarwal and Sinclair (1997), it may be defined as the study of seed borne disease and pathogens carried with seed. It also includes studies on the mechanisms of seed infection, seed transmission, the role of seed borne inoculum in disease development, methods for the detection of seed borne pathogens and non-pathogens, seed certification standards, mycotoxins and mycotoxicoses, and various methods for control of seed borne disease. Seed pathology includes the study of diseases and deterioration caused by bacteria, fungi, nematodes, viroids, viruses, physiological and mechanical disorders.

Neergaard Paul is considered the father of seed pathology. He was one of the founding father and later served as Director of the Danish Government Institute of Seed Pathology for Developing Countries, Copenhagen, Denmark, from 1956 to 1974. He served as the Chairman of the Plant Disease Committee of the International Seed testing Association (ISTA). During his tenure as Chair of ISTA, he helped standardize methods for the detection of seed borne fungi.Neergaard (1977) authored a two-volume text entitled “A Seed Pathology”. This text has served as a reference and teaching standard for the science of seed pathology throughout the world (Agarwal and Sinclair, 1997). This text focused on a wide variety of seed pathology issues, ranging from the economic significance of seed borne diseases to the assessment of seed borne inoculum.

Proper marketing of perishable commodities such as fruit and vegetables often requires some storage to balance day-to-day fluctuation between harvest and sale or for long term storage. Storage of horticulture produce is attempeted with a view to extend period of availability. Storage controls shelf life of produce by controlling rate of respiration, transpiration, ripening and biochemical changes all of which are responsible for shelf decomposition/deterioration of produce. Further, different types of storage have different attributes in minimizing microbial infection and thus add to better storability of produce.

Fermentation in food processing typically is the conversion of carbohydrates to alcohols and carbon dioxide or organic acids using yeasts, bacteria, or a combination thereof, under anaerobic conditions.

A dilute solution of acetic acid produced by a two-stage fermentation process in the first stage, fermentable sugars is converted into ethanol by the action of yeasts and in the second stage, bacteria of the genus Acetobacter oxidize the ethanol to acetic acid.

Vinegar is a liquid produced from the fermentation of ethanol in a process that yields its key ingredient, acetic acid. The acetic acid concentration ranges typically from 4 to 8 percent by volume for table vinegar (typically 5%) and higher concentrations for pickling (up to 18%). Natural vinegars also contain smaller amounts of tartaric acid, citric acid, and other acids.

Quality Standards and Laws

Quality is how well a product or service satisfies the needs of the customer. This includes all aspects related to the needs of the customer such as quality specifications, safetgy, delivery method or date, price etc. Quality can be interpreted in several ways as conformance to the standards, meeting customers’ preference/ satisfaction for desired quality attributes, degree of excellence and zero defect products etc. Because of education and consequent greater understanding of implications of poor quality commodities in recent years, consumers have become quality conscious and this fact is also applicable to food and food products. In order to strengthen competitiveness, quality must be incorporated throughout the value added chains right from the harvesting, handling, manufacturing, processing, packaging, storage, marketing and distribution stages, especially in the case of food and food products.

ABSTRACT

Magnolia campbelii Hook.f. & Thomson is a deciduous tree species belonging to Magnoliaceae and is highly valued for its ornamental uses. The species is threatened by habitat degradation as well as its utility as timber. It is distributed in the eastern Himalaya, southern Myanmar, and Yunnan province of China. However, its exact distribution in the eastern Himalaya is unknown owing to rough terrain and remote location of the Himalayas. We modelled the environmental niche and delineated the potential habitats and distribution areas of the species in this study using ENVIREM dataset and Maxent software. Thermicity Index and Topographic Wetness were the critical environmental variables determining the species distribution in the eastern Himalaya as revealed by Jackknife analysis. Geographical projection of the modelled environmental niche indicates that most suitable areas for its distribution are the western part of Arunachal Pradesh, few pockets in Sikkim, and the central part of Bhutan. The results of the study have implications for in situ conservation of the species as well as identifying suitable areas for reintroduction.

ABSTRACT

Picrorhiza kurroa Royle ex Benth.is a perennial herbaceous plant species of the family Scrophulariaceae growing at high altitude regions of Himalayas, and recorded to have a wide application in Ayurvedic system of medicine known by the name of kutki. In traditional system, this plant species is used to cure disorders of liver, respiratory tract fever, dyspepsia, chronic diarrhea and scorpion sting. P. kurroa is a growing source of interest because of having number of interesting activities such as immnunomudulatory, hepatoprotective and anticancer, highly used by pharmaceutical companies for development of new molecules and herbal botanical formulations. It has been scientifically validated that this species is a repository of bioactive chemicals such as picrosides, kutkoside, and cucurbitacins isolated and characterized mainly from the roots of this plant. This communication deals with the chemistry and biological activities associated with its main chemical constituents, and can be helpful in development of new drug as medicine. This communication will provide a baseline information and useful tool for researchers who work on the area of natural products, and look for new direction in drug discovery.

ABSTRACT

Cymbopogon khasianus (Hack.) Stapf. ex Bor. variety [IIIM (J) CK-10 Himrosa] is a commercially important aromatic grass of the family Poacae and contains high valued volatile constituents which has high demand in pharmaceutical, flavour, fragrance and cosmatic industries. This plant variety is one of the rich source of two monoterpenoids, geraniol and ocimene. Geranoil is an alcohol frequently used as terpenoid fragrance material, and ocimene is a group of isomeric hydrocarbons. The present communication deals with the herb yields, volatile constituents and agrotechnology of CK-10 Himrosa. The volatile constituents vary from season to season and from geographic locations of cultivation. Data presented were collected from field trials and experiment works conducted on farmer field at Balesar area of district Jodhpur (Rajasthan). It has been observed that [IIIM (J) CK-10 Himrosa] is rich in geraniol whose percentage varies from 70-80%, cisocimene (10-11%) trans-cimene (5-6%) geranyl acetate (2-3%), and various others constituents present in minor quantities. For analysis of volatile constituents, Gas Chromatography–Flame Ionization Detector (GC-FID) and GC-Mass Spectrometry (GC–MS) methods were developed. Agronomic data indicate substantial variations in the essential oil compositions, which varies due to season of harvest and place of cultivation. This crop is hardy in nature and from future perspectives; extension of these aromatic crops in rainfed and saline areas could brought un-utilized barenlands and wastelands under cultivation. Biomass and essential oil obtained from this crop would be helpful in development of new value added products. This may serves as economic crop for marginal farmers and helpful in gaining international recognition after development of products in the form of perfumes, soaps, cosmetics and other products for human use.

ABSTRACT

Himalaya represents an importantfocal point of botanical rich diversity, and homeofmanymedicinal plants known for their various therapeutic properties. Since ancient times, several plant species have been used as ethnomedicine, and only a few of these species have beenfully explored and validated scientifically. Today, cosmetic and pharmaceutical industries are the fastest growing sectors that use botanical extracts to maintain the health and support integrity of the skin and other parts of human body.Peoplearedemandingcosmeceuticaladditivesfrommarket made from plants as herbal botanicals as these causes fewer or no side effects, and therefore, ethnomedicine are gaining immence importance for cosmetic and value added products development of natural origin. Human and animal skin is the largest covering of the body as it provide barrier to the internal cells ortissues,and protectthebodyfrominfections and toxic chemicals. Keeping in mind the importance of skin, investigations and literatures were consulted to document plants protectingskininfectionsfrom external environment.Thepotential high altitude plants ofHimalaya were screened outto be used inskin care and treatmentofvarious skin pathogens.Inthe presentcommunication, total 81 plants of 72 genera belonging to 40 families are presented that have ethnobotanicalapplicationinskin care and usages incuringskindiseases. This data will provide a base-line information for cosmetic and pharmaceutical companies for developmentof various new value-added products for human and animal health care.

1. Introduction

Among three major functions identification, classification and nomenclature of taxonomy (Fig. 1), identification is a core activity and one of the major objectives of taxonomy, which determines whether other two elements are the same or different. Classification and nomenclature are two separate methods in taxonomy, however, both are totally dependent on the correct identification of the objects. The identification of an unidentified plant with a correctly identified specimen also involves classification. So, both identification and classification, involve comparison and judgment of similarities and differences. Therefore, the identification is a primary function in classification involving nomenclature which performs an essential role as a means of communication. According to Blackwelder (1967) “identification enables us to retrieve the appropriate facts from the system (classification) to be associated with some specimen at hand” and is “better described as the recovery side of taxonomy.” The identification of plants is very important for proper assessment and characterization of biodiversity on which the whole life of human beings is dependent starting from birth to death. The use of biodiversity for various purposes like food, nutrition, pharmacognosy etc. requires accurate and reliable identification and naming of plants (Nesbitt et al. 2010).

The plant gums are the neutral salts and complex polysaccharide acids which contain methyl pentose, pentose, hexose and uronic acid residues joined glycosidically by linkages involving various carbon atoms within one molecule to form branched chain structure. Uronic acid is generally present in all cases. The sugars include L-fructose, D-xylose, L-arabinose, D-rhamnose, and D-galactose.

General Properties of Gums

They have high molecular weight. Some are linear while some are branched. They are generally viscous in nature. Some forms a gel also. They have tremendous commercial application in food industry. Gums may be an exudates gum produced by the plant or may be a seed gum, which is accumulated during the seed maturity. Gums of polysaccharide origin are obtained from Acacia spp. (gum Arabic), Cymopsis tetragonolobus (guar gum), Guggle gum, Ficus indica, chia gum etc (Table 7.1).

4.1 Introduction

Extraction is a process whereby the desired constituents of a plant are removed using a solvent. The primary ways for extraction of organic molecules of interest to biologists and medical investigators involve breaking open the cells. Cell rupturing is carried out in a variety of ways. The method used depends on the type of tissue used. For plant cells grown in cell suspension culture or for plant callus tissue, a French press or a sonicator can be used to break open the cell. Plant cells grown in culture can also be ruptured with a glass tissue homogenizer. Silicified or highly lignified plant tissues within the organs such as roots, stems, leaves, fruits and seeds are usually frozen and pulverized using liquid nitrogen in a mortar and a pestle (Kaufman et al., 1999). Softer tissues can be ground in a small volume of buffer in a mortar, washed white sand and a pestle to rupture the cells.

When the cells have been ruptured, the extraction is performed using the appropriate techniques. Water soluble compounds and proteins are extracted in buffers or water. Organically soluble compounds are extracted with organic solvents. Boiling ethanol is a good all-purpose solvent for preliminary extraction (Harborne, 1998). The success of the extraction with alcohol is directly related to the extent chlorophyll (when isolating substances from green tissue) is removed into the solvent. The most common chemical procedure for obtaining organic constituents from dried plant tissues is to continuously extract powdered material in a Soxhlet apparatus with a range of solvents, starting with petroleum ether and chloroform (to separate lipids and terpenoids) and then using alcohol and ethyl acetate (for more polar compounds). This method is useful when working on the gram scale. However, one rarely achieves complete separation of constituents and the same compounds may be recovered (in varying proportions) in several fractions. The extract obtained is clarified by filtration and is then concentrated in vacuo in a rotary evaporator. To prevent fungal growth, a trace of toluene may be added to the concentrated extracts and they should be stored in refrigerator. There are short cuts in extraction procedures which one learns with practice. The concentrated extract may deposit crystals on standing.

In the present era, residue analyst is exposed to array of analytical choice and as per International regualtions, presence of pesticide residues in environmental components and food commodities are becoming more stringent.Generally, multiresidue methods are based on GC equipped with selective detection either electron capture detector, nitrogen phosphorous detector, flame ionization detector etc. One most widely applied technique in pesticide residue analysis is HPLC, equipped with different detectors. Another up-datemethod for confirmation is gas chromatography-mass spectrometry(GCMS)and HPLC-MS applyingparticlebeam or thermo sprayionisationtechnique. Recently one more analytical technique which has gained ground in the field of pesticide residue analysis, is high performance thin layer chromatography (HPTLC).The criteria of good analytical technique like simple, rapid, flexible, versatile, inexpensive, easily documented and validated has been the inherent advantage of HPTLC. Strictly speaking, HPTLC is not different in principleor application from conventional TLC, but due to improvements in materials, its effectiveness has also enhanced.The technique has a potential to operate upto femtogramlevel. HPTLC is a sophisticated and automated form of TLC. It is a technique which can generate about 5000 or more theoretical plates. The high performance in TLC is achieved by optimized plate coating materials, by improved sample application techniques, and by developing newmethods for the development of mobile phase. Thus HPTLC is an instrumental approach at different stages of TLC. A flow chart for HPLC principle is shown in Figure 8.1. The principle of separation is based on adsorption and this leads to easyseparationof isomers, includingchiralcompounds.Main difference between HPTLC and TLC is given in Table 8.1

Genetically modified organisms (GMOs) can be defined as organisms in which the genetic material (DNA) has been altered in a way that does not occur naturally. The technology is often called “modern biotechnology” or “gene technology”, sometimes also “recombinant DNA technology” or “genetic engineering”. It allows selected individual genes to be transferred from one organism into another, also between non-related species. Genetically modified (GM) foods are foods derived from genetically modified animals and marines. Genetically modified animals and marines are those in which specific changes introduced into their DNA by genetic engineering using a process of either Cisgenesis or Transgenesis. These techniques are much more precise than mutagenesis where animals and marines are exposed to radiation or chemicals to create a non-specific but stable change. Other techniques by which food animals can be modified are selective breeding and somaclonal variation. By this means desired quality of meat, egg and other animal products can be produced. But it is a common thinking that foods derived from genetically modified animals and marines are far from safe. They are likely to be contaminated by potent vaccines, immune regulators and growth hormones, as well as nucleic acids, viruses and bacteria that have the potential to create pathogens and to trigger cancer.

Evapotranspiration is the combination of two separate processes named evaporation and transpiration. Evaporation accounts for the movement of water to the air from sources such as the waterbodies and soil. Transpiration accounts for the movement of water within a plant and the subsequent loss of water as vapour through stomata in its leaves. So evapotranspiration is a bio-physical process.

Evaporation

The change of state of water from liquid to the vapour and its diffusion into the atmosphere is referred to as evaporation. During evaporation, water molecules absorb energy which gives them the motion required to escape from the surface of liquid and become a gas. Since a certain amount of energy is consumed in the process of evaporation, the remaining liquid is cooled by an equivalent amount. Thus, the process of evaporation is always accompanied by a cooling effect.

As evaporation proceeds, the surrounding air becomes gradually saturated with water vapour and the process will slow down and might stop if the wet air is not transferred to the atmosphere. The replacement of the saturated air with drier air depends greatly on wind speed. Hence, solar radiation, air temperature, air humidity and wind speed are meteorological parameters to be considered when assessing the evaporation process.

In agrometeorology, evaporation is defined as the maximum possible loss of moisture from a wet, horizontal, flat surface exposed to weather parameters, which exist in the vicinity of plants. Evaporation is an essential part of the water cycle. It is the primary pathway through which water moves from the liquid state back into the water cycle as atmospheric water vapour. The oceans, seas, lakes and rivers provide nearly 90 per cent of the moisture in the atmosphere via evaporation, with the remaining 10 per cent being contributed by plant transpiration. A very small amount of water vapour enters the atmosphere through sublimation, the process by which water changes from a solid (ice or snow) state to a gaseous one, bypassing the liquid phase.

Weather and climate have great influence on farm animal production. The environment in which an animal lives is referred to as its habitat. A habitat includes both biotic (living) and abiotic (nonliving) components of the animals’ environment. Abiotic components of an animal’s environment include temperature, humidity, oxygen, wind, soil composition, day length and elevation. Knowledge of how potential environmental stressors (ambient temperature, humidity, thermal radiation, air speed, etc.) can directly and adversely affect animal performance, health and wellbeing is also required for a successful animal farming. The indirect consequences of weather include their impact on feed quality and availability.

Birds and mammals are warmblooded (endotherms or homeotherms), possessing a thermoregulatory system that maintains a stable body temperature and uniform internal environment (homeostasis) by converting food energy into heat. All metabolic processes generate substantial heat and much of this is retained within the body of homeotherms by insulating layers of fat, feathers or fur. Dairy cattle, like other warmblooded animals, function most efficiently in environments where they can maintain their body temperature at around 38° C. Tissue and cellular metabolism and the underlying biochemical reactions that sustain life and productive functions need body temperature to be maintained within very narrow limits. Relatively small increases in body temperature result in the breakdown of body protein and a significant depression in production.

Climate change, particularly global warming has complex impacts on domestic animal production system affecting feed supply, challenging thermoregulatory mechanism resulting thermal stress, emerging new diseases due to change in epidemiology of diseases and causing many other indirect impacts. So, climate change will have farreaching consequences for dairy and meat production, especially in vulnerable parts of the world where it is vital for nutrition and livelihoods. Due to poor availability of good quality feed and fodders in India, animals are generally maintained on poor quality grasses available in the pastures or are stallfed, mainly on crop residues. India is already deficit in feed and fodder. These shortages would be further aggravated by the adverse effects of global warming on fodder crop production.

Climate, soil, input and management factors influence the crop yield. Weather is the most important natural input that affects the agricultural production and productivity. The agricultural activities starting from the land preparation to harvest and post-harvest storage are greatly influenced by the weather. The effects of weather on crops may be direct such as those of precipitation, solar radiation, humidity, temperature, etc., or indirect such as those of pest, diseases, weed competition, etc. Thus, the success or failure of a crop is determined by the prevailing weather conditions. Although influence of weather conditions on yield is well established, the quantitative assessment is not always straight forward and simple. The quantitative assessment of the effect of weather on crops is an important application of agrometeorology. The relationship between weather and crop production has been understood through crop weather modelling and study on this aspect through a systematic approach started a century ago. The aim of developing crop weather models is to ensure better utilisation of resources and hence a more environmental friendly and sustainable agriculture.

A model is a schematic representation of the conception of a system or an act of mimicry or a set of equations, which represents the behaviour of a system. Its purpose is usually to aid in explaining, understanding or improving performance of a system. Agricultural models are mathematical equations that represent the reactions occurring within the plant and the interactions between the plant and its environment. However, it is a difficult task to represent any system completely in mathematical terms because of the complexity of the system. Universal models do not exist for the agricultural systems and agricultural models are built for specific purposes and the level of complexity is accordingly adopted. Different models are developed for different subsystems and several models may be built to simulate a particular crop or a particular aspect of the production system. Crop weather models may be defined as a simplified representation of the complex relationships between weather or climate on one hand and crop performance such as growth, yield or yield components, on the other hand by using mathematical and/or statistical techniques

Abstract

Agriculture is the backbone of India’s economic development and has experienced immense growth in the past few decades. Agriculture not only involves the participation of male workers but also experiences active participation of all family members, as well. Women, as part of the family, take up agricultural activities as an extension to their household chores. The Government and voluntary agencies have also recognised the need for women in the farming community to become self-reliant and active participants in the agricultural sector. Increasing awareness and educating themselves with the passage of time, farmers have made themselves aware of new techniques of farming and growing and established themselves as agricultural entrepreneurs in the long run. Many initiatives supporting women entrepreneurs and creating a supportive ecosystem for women to become agricultural entrepreneurs have been initiated by the state. The case of Anita Devi popularly known as the Mushroom Lady of Bihar has been taken up in this paper to substantiate with evidence how government initiatives have helped her gain success and grow as an agricultural entrepreneur. This study aims at disseminating how such initiatives help in creating an ecosystem that motivates agricultural entrepreneurs in general and women in particular.

Abstract

India is the second largest food producing country in the world. Food processing is one of the key industries in the country and a sector that has direct linkage between agriculture and industry. Being the second largest producer of fruits and vegetables along with its strategic geographic location and proximity to food importing nations, India is in an advantageous position in terms of exporting processed food. As per estimates, Indian food processing sector stood at USD258 billion in the financial year 2015. The growth and development of this industry have direct impact on the Indian economy. The aim of the present study is to discuss about the growth of the food processing industry, analyse its strengths and weaknesses and generate possibilities of entrepreneurial development towards the expansion of the sector. This study has been a secondary data analysis based on data collected from journals, magazines, web searches and reports from various government and private agencies.

The study has identified the main drivers aiding to the growth of the sector. It includes strong domestic demand, rising export opportunities; supply side advantages for exporters due to rising global demand and strong policy support from the Government. On the other hand, fragmented market, infrastructure support, namely cold chain, innovation and skill development are the major hurdles that have to be overcome. This article makes an attempt to explore entrepreneurial opportunities and few areas where new business could be initiated. The entrepreneurial opportunities highlighted in this paper are based on Drucker’s opportunity construct that entrepreneurs have an eye more for possibilities created by change than the problems.

Flowers are classified into three groups- self pollinated, often cross pollinated and cross pollinated- based on the extent of cross pollination which ranges from nil to 5 percent in self pollinated, 5-12 percent in often cross-pollinated and more than 12 percent in cross pollinated flowers. The information on extent of cross pollination is important to decide appropriate breeding methods to develop and improve the crop, to maintain genetic purity of seed, and to decide safe isolation distances from varieties, related species and related genera of the crop.

3.1 Autogamous (Self pollinated) flowers

When the egg in a flower gets fertilized by its own pollen, it is, referred to as autogamy. In statistical terms, it is, explained as the probability that egg gets fertilized by its own pollen as one. The coefficient of inbreeding which also measures the probability of selfing is also one in such crops. The genetic structure of autogamous flower is homozygous. The reasons for autogamy in flowers are essentially homomorphism, cleistogamy and chasmogamy. Homomorphism refers to uniformity in placement of essential floral parts, androecium and gynoecium e.g. Aster (double flowered), Balsam, Bells of Ireland, Carnation, Clianthus, Benghal dayflower (Commelina benghalensis), Gypsophila, Lupine, Salvia, Saponaria, Sweet pea and Sweet William. In autogamous ornamental crops, cross pollination in nature is almost negligible. Autogamous pollination may be of three types viz., autogamous selfing: refers to origin of pollen from anthers of the same flower; geitonogamous selfing refers to pollen from different flower on the same shoot or genet, and xenogamy, crossing refers to pollen from different flower on a shoot from another genet.

Abstract: Crossandra, traditional flower crop of India, produce beautiful flowers in remarkable range of colours of almost all the year. Flowers are ideal for garland making and hair adornments. Only few species are cultivated across the world. Improvement is focused on drought tolerant ornamental types for landscape/ container use, better keeping quality, heavy yield and vivid range of flower colours, long spikes, earliness and big flower size. Breeders have created mutant cultivars and F₁ hybrids having valuable traits. Lack of fragrance and meager seed set require biotechnological interventions.

Abstract: Gaillardia, commonly known as ‘Blanket flower’, is excellent for cut flower, mixed borders, edging and bedding plants. Huge quantum of variability exists in this crop in India. Currently, there are many interspecific hybrid cultivars and open pollinated varieties available in the market. Biparental inbreeding depression has complicated the progress of crop development. Traits of interest to flower breeders for crop transformation include, plant architecture, flower morphology (colour, size, quality), attractive seed heads and drought stress.

Abstract: Hollyhocks are seed propagated garden annuals with numerous hybrid phenotypes, series (single and bicoloured Halo series), Spotlight, Carter’s Double, Double Triumph, Giant Double Powder Puff, Halo Bush (tricoloured), Halo Mixed (eight colours) and cultivars are available in the world market. Unusual plant height, delayed flowering compared to other winter annuals handicap its popularity. While little genetic information and trait heritability has been established for this crop, breeding continues to produce new variants for commercial production. Gene pool of hollyhock exhibits great diversity. Breeding objectives with high priority include dwarf stature (2 feet height), compact growth, double and large flowered inflorescence, precocious flowering and resistance to leaf rust disease.

Abstract: Lotus, aquatic economic flower, associated with religion, art, and culture, is native to India. Most cultivars are diploid, seed and vegetatively propagated. Lotus is cross pollinated and progeny can segregate widely for traits due to heterozygosity. Low seed set often pose significant challenge to breeders. Breeding efficiency remains unknown. Flower breeders have created new colours with interspecific hybridization including yellow, pink, white and rose colour changing to creamy yellow. Traits of interest for crop transformation include environmental adaptation to stressful condition, low seed tannin, and flowering (colour, size, timing, etc.). Genetics of characters is unknown. Future breeding and genetic studies are needed for further transformation of this crop.

Abstract: Calendulas, popularly known as pot marigold, are admired for their ornamental value. The leaves, seeds and flowers are source of oil, pigments, dye, flavonoids, and ingredient in cosmetics, human, and animal medicines and dietary composition. Currently, there are intraspecific hybrids in the market. Traits of interest to flower breeders for crop transformation include plant architecture, flowering, flower colour and size, large and bold seed with high oil, pest and virus resistance.

Keywords: Calendula, intraspecific hybridization, mutation, molecular marker.

Abstract: Verbena, popular annual is suitable for landscapes, hanging baskets and ground cover as bedding type. Due to seed propagation and out crossing, progeny can segregate widely for traits due to heterozygosity. Important traits for landscape use include flower colour and extended bloom time, large and highly showy flowers, plant architecture (matting habit), environmental adaptation to stressful condition (heat tolerance) and disease resistance. Genetic information and trait heritability is almost unknown for this crop. The use of interspecific hybridization, polyploid, breeding for disease resistance and mutation breeding are presented. Tissue banks and genetic evolutionary race history have been maintained. Transgenic plants have been developed.

Keywords: Phylogeny, breeding, F₁ hybrids, transgenic.

1. INTRODUCTION

Leaf and soil analysis are the tools to estimate the fertilizer needs of fruit crops. Leaves are selected for analysis because:

• Leaf is the principal site of plant metabolism.
• The changes in nutrient supply are reflected in the leaf composition.
• The changes are more pronounced at certain stages of development.
• The concentration of nutrients in the leaf at specific growth stages are related to performance of the plant.

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome and bulb) of plants used as a flavoring or seasoning, although many can also be used as a herbal medicine. They are those plants, the products of which are made use as food adjuncts to add aroma and flavour or they are derived vegetable substances which are used for seasoning the food imparting distinctive flavour and fragrance that gives zest or piquancy for enjoyment. The term ‘spice’ originated from the Latin word ‘species’, meaning of specific kind. A closely related term, ‘herb’, is used to distinguish plant parts finding the same uses but derived from leafy or soft flowering parts. For example Black pepper, Ginger, Turmeric, Chilli, Cinnamon, Nutmeg etc. Spices are generally composed of fiber, carbohydrate, fat, sugar, protein, gum, ash, volatile (essential oils), and other nonvolatile components. All of these components impart each spice’s particular flavour, colour, nutritional, health, or preservative effects. The flavour components (volatile and nonvolatile) are protected within a matrix of carbohydrate, protein, fiber, and other cell components. When the spice is ground, cut, or crushed, this cell matrix breaks down and releases the volatile components (Raghavan, 2007).

Any crop improvement programme primarily depends on the amount of genetic variability available and the extent to which the economic traits are heritable. A wide survey of genetic variability and a thorough understanding of the genetic makeup of the crop with the biometrial tools is very much indispensable for initiating an effective breeding programme.

Effectiveness in breeding programme depends upon three main factors viz., (i) the extent of genetic variation available, (ii) heritabiity of the variation and (iii) intensity of the selection pressure that can be applied. As most of the characters of economic importance and related characters which influence the performance of the economic character in a given set of environment are highly influenced by the environmental conditions, the heritable (genotypic) variation usually masked by non-heritable (environmental) variation and thereby creates difficulty in exercising the selection. Hence, it becomes necessary to partition the overall variability into heritable and non-heritable components to enable the breeders to plan for proper breeding programme.

The estimates of mean, variance and standard error are worked out by adopting the standard methods of Panse and Sukhatme (1961). Usually, randomized block design is the choice of the statistical design. Various genetic parameters are worked out from the mean squares. Assessment of genetic variation is usually made through the computation of genotypic variance and genotypic coefficient of variation. The proportion of the total genetic variance expressed as percentage of total phenotypic variance has been used as a measure of genetic variability of heritability in broad sense.

Introduction

Gerbera is one of the most important commercial flowering crops growing in the world as a cut flower as well as garden decoration, which belongs to family compositae and native in South Africa and Asiatic region. Presently, its demand and utility are rising up continuously in India both in urban as well as rural areas throughout the year. Peoples prefer this flower, because of its unparallel diversity in colour and long vase life; whereas farmers took this crop in relation to high margin of profit and long post harvest life over some others flower. Now, people are showing their keen interest towards use of this flower in their daily life and for celebrating a colorful festival. As per report of NHB (2014), total crop area is 820 hactors, where flower marketed of 3.96 and 17.84 MT of loose and cut flowers respectively. The prime producing states in India for gerbera flower production are Karnataka, Maharastra, Assam, Uttrakhand, Telangana, Tamilnadu and West Bengal. There are some constrains identified in gerbera cultivation under protected situation, like initial investment is too much, protocol of the technology is very much restricted, regular supervision is an essential and all local festivals regulates quantity of consumption etc. However, before adopting this technology for implementation as taking part of business, users should upgrade their knowledge by seeing and believing at different production centers. Details about latest technology are summarized under mentioned, which may be helpful to the students and farmers to some extent for ready references.

Abstract

Agro-food industries generate a large amount of by-products and wastes. These byproducts and wastes have a negative impact in terms of the environmental concern due to the increase of pollutant disposal, and industrial sustainability because of high costs related to their management. These byproducts and wastes are rich in minerals, sugars and proteins. The composition and characteristics of wastes from different food processing industries vary and rely upon the production technique and the nature of the product. India is the second largest producer of rice/paddy in the world and the utilization of rice bran is gaining importance. However, a small fraction of these have been utilized. In case of fruits and vegetables, industrial processing of potato generates between 70 and 140 thousand tons of peels worldwide annually. Moreover, 37% of world’s total annual production of banana is shared by India. Hence, to minimize the disposal fees and trash collection new policies and methods have been developed for handling and treatment of wastes and byproducts. This chapter envisages the status of different agro-food industrial byproducts and wastes for the development of different food and non-food products.

Abstract

Tremendous hike inworld population has increased thrust on the limited resources which has considerably affected the viability of the food. The emerging challenge for policy makers and food scientists is to put forward viable solutions. Utilization of underutilized crops/plants that act as good sources of starch could be explored in a better way for the sustenance of the limited sources like food crops/plants. The demand for starch and the foods containing starch has been increasing continually. Since, the starch in its native form has certain limitations in its functional properties to be used for different applications. Therefore, it becomes important to explore certain technologies which could be used for modification of starch. Among different technologies gamma irradiation ensures food safety while inducing physicochemical changes of the components. Although, the chemical modifications have been used widely so far but the concerns related to the chemical residues left are diminishing their demand. Hence, the physical processes particularly the gamma irradiation process has emerged as an efficient alternative with some benefits over other process like eco-friendly, economical, reliable and safe for altering the physico-chemical and biological characteristics of the product. Gamma Irradiation of starch has been successfully employed for the achievement of some desired physico-chemical, biological and functional properties of the foods and other related items. In this chapter, valuable impact of gamma irradiation on the physico-chemical, biological and functional properties of starch has been summarized.

Ber (Zizyphus mauritiana Lamk), is an ancient fruit crop of India. It is relished for its sweet and sour fruits. The fruits are nutritious containing high amount of vitamins like C, A and B complex. The genus Zizyphus belongs to the family Rhamnaceae, consisting of 40 species of tropical and subtropical regions of northern hemisphere (Yadav et al., 2005). The one Zizyphus jujube (Chinese jujube) and the other Zizyphus mauritiana (Indian ber) are the two important species grown widely in temperate, tropical and subtropical regions of the world. The ruggosa and nummalaria are other important species.

PRESENT STATUS

Ber, a popular fruit, is being grown as almost commercially important fruit crop. It has better adaptability in marginal soils in arid region of subtropics. It is mainly grown in India as well as different countries in central Asia, China and Taiwan. It has been truly called as poor man‘s fruit/poor man‘s apple. Ber can suitably be grown almost in all the parts of north Indian plains in Uttar Pradesh, Haryana, Punjab and Rajasthan. Seedling ber trees are found extensively growing widely in arid and semi arid areas.

Gender relates to socially assigned roles and responsibilities attributable to men and women. Gender roles are played by both women and men, which are not determined by biological factors, but by the socio-economic and cultural environment or situation (Mollel and Mtenga, 2000).

Women from poor households engage in a variety of income earning activities. In some cases, these activities supplement the contribution by males, while in others they are the primary or the sole source of household livelihoods (Kabeer 2003). Women are twice as likely as men to be involved in agricultural activities (Odame et al., 2002). According to Fernando (1998), activities, resources and opportunities of people are significantly influenced by gender that is, by the socio-economic and cultural dimension of being male or female. Moreover, different types of activities are generally allocated to women and men within the family with a view for subsistence production and marketable production. In most of the societies, tasks related to child bearing and care and maintenance of the household (cooking, fetching water and firewood) are assigned to women.

Pulse production is an integral part of food production, which helps in ensuring nutritional security by way of providing plant protein in human diet. In spite of several efforts, lots of people in third world countries suffer from nutritional deficiencies due to lack of balance diet. The women folk are the most sufferers, who are deprived of taking adequate quantity of protein rich food that helps in growth and development of human body.