eChapters

There has been an increasing demand for horticultural crops more particularly fruit .With this, the demand for good quality planting materials has gone up and hence the nursery business has developed rapidly in the recent years in our country. Plant propagation aims at the reproduction of selected individuals or group of individuals, in this the basic principal of life impose certain requirements which must be met with in practices for successful propagation. Plants material of various fruit crops have not only to be raised efficiently and scientifically, for which skilled knowledge in raising and management of nurseries is needed, but also these have to be transported quickly from nurseries to place where these plants materials will be grown.

Availability of quality planting material is one of the most importanant requirement for increasing the production and productivity of any fruit crops. It becomes one of the great challenges for horticulturists to get the disease free quality planting materials of fruit crops from an efficient and reliable nursery.

In the present scenario of rapidly increasing population and decreasing cultivable land, there is urgent need to increase the agricultural productivity. According to Indian Council of Agricultural Research (ICAR), 280 million tones food grain would be required to match the country’s demand by 2020. It will be a difficult task to meet this food requirement in near future from the present productivity levels. It is necessary to increase agricultural productivity, because about 60% of Indian agriculture is rainfed. Proper use of even a single drop of rain water is necessary to ensure the success of rainfed agriculture. In hills, agriculture is main source of livelihood of rural people. However, small and scattered land holding, difficult topography, womendependent agriculture, totally rainfed, typical socio-economic factors and migration of youth towards urban/plain areas are major constraints of hill horticulture.

In the high altitude areas, the river flow in deep valley at the toe of slopes rarely serve any purpose as far as domestic water supply and irrigation are concerned and hence, agriculture in these areas is mostly rainfed. However, these areas received high magnitude of rainfall but this rainwater is not possible to convert into soil moisture due to steep terrain of hills which provided minimum opportunity time for infiltration of rainwater. It has been estimated that only less than 15 per cent of the rainwater is able to percolate down through slopes and recharge the soil moisture. The rainfall pattern hill is erratic i.e. most of rain (approximately 70% of annual rain) received only during the two months of monsoon. Furthermore, the climate of high altitudes comprises several climatic anomalies such as wide variability in temperature (-3 ^oC to 35 ^oC), frequent snowfall, hail, sleet and erratic pattern of rainfall. Under such abrupt conditions crops grown in open conditions could not be sustained.

Importance of fruits in human diet is well recognized since time immemorial. They are important part of a healthy diet as natural sources of energy, essential vitamins, minerals and antioxidants ever since the beginning of humancivilization. Our country is bestowed with varied climatic conditions, which had made it possible to grow diverse group of fruits from its temperate to tropical, to subtropical and even to arid niches. The cultivation of fruit crops is, presently, one of the most important and profitable proposition. Growing fruit crops translate into realization of more yield/ income from a unit area of land than any of the agronomic crops. However, there is need to considerably increase the yield of fruit crops, particularly under changing environmental conditions as under such conditions diseases are getting more prevalent. Therefore by adoption of proper protection practices, yield of fruit crops can be improved.

Plant diseases caused by fungi, bacteria, viruses and phytoplasmas reduce crop yields (Khoury and Makkouk, 2010).Adoption and support for using participatory approaches help to farmers in disease management of fruit crops, reducing costs and improving production efficiency. Fungal, bacterial and viral diseases pose serious threat in the cultivation of fruit crops in India. To reduce the losses caused by plant disease, a complete knowledge of disease management strategies of fruit crops are essential which are as follows:

Heifers are future cows of the herd. Production and reproduction performance of cows depends on the care and management during calf and heifer stage. Rearing period of heifers can be divided into two stages, viz. from weaning to first service and service to calving.

Care of calf before birth

During the last 2-3 months of gestation the fetus grows rapidly. Calf draws a significant quantity of nutrients from the mothers system. It has to be replenished by additional feeding of the cow. A cow should be fed well-balanced ration for maintenance.

Organic certification is the procedure by which the accredited certification Body by way of a Scope Certificate assures that the production or processing system of the operator has been methodically assessed and conforms to the specified requirements as envisaged in the National Programme for Organic Production (NPOP).

The NPOP provides for Standards for organic production, systems, criteria and procedure for accreditation of Certification Bodies, the National (India Organic) Logo and the regulations governing its use. The standards and procedures have been formulated in harmony with other International Standards regulating import and export of organic products.

Introduction

The Intergovernmental Panel on Climate Change (IPCC) assessment reports (IPCC, 2007) suggests that consequently occurring climate extremes are likely to increase the frequency and intensity in the future. In the Indian context, events such as landfall of rare of rarest most intense pre-monsoon Tropical cyclone Fani (2019), back to back landfall of very intense tropical cyclones such as Phalini (2013) and Hudbud (2014), Cyclone Komen (2015), Extreme rainfall events of Kerala (2018 and 2019), Heavy rainfall events of over Northeastern states of India (2019), Cloud burst events of Uttarakhand (2013), Rainfall over Himachal Pradesh (2019), Mumbai Rain fall (2015) and extreme heat wave conditions of 1998, 2015 and many similar type of extreme events are not usual. However, at present there is no unanimity among scientists to exclusively and directly link such extreme weather events to climate change, however based on number of studies and observation data sets it is agreed that the impact of climate change is evident (beyond the natural variability) in many part of the globe including India. In 2019 monsoon season at least 1351 deaths happened to ?oods, heavy rainfall and landslides compared to 1550 for year 2018. In this manuscript, recent research findings related to extreme weather events in the context India are discussed in the following section-2, need for high resolution and long term data sets are emphasized in section-3, followed by recommendations as part of future preparedness, that will not only enable us to address these issues in a robust scientific manner but also provide us strong resilient society to face these extreme weather events in an optimized and effective manner to minimize the loss of lives, properties and socio-economic conditions of citizens.

Introduction

Climate change is one of the biggest environmental threats to food production, water availability, forest biodiversity and livelihoods. Warming of climate system of the earth is a unanimously accepted reality and probably one of the most prominent challenges for scientists, development workers, policy makers and other relevant stakeholders regarding development and sustainability in international and national arena during past several years. Intergovernmental panel on climate change (IPPC) has described climate change as any anthropogenic or naturally occurring alteration in the climate over time. It is widely believed that developing countries such as India will be impacted more severely than developed countries. Climate change is emerging as a big threat to sustainable development of agriculture including animal husbandry and to the livelihood of people. Extreme events such as cold waves, heat waves, ?oods and high intensity single day rainfall events are on increasing trend during the last decade (Dikshit and Birthal, 2010). It is probable that by 2030 the impacts of climate change will be noticeable, although not dramatic and will be largely manifested through changes in pasture growth and quality, and greater inter-annual variability in pasture production. Livestock contribute to climate change by emitting methane through enteric fermentation. But they are also affected by climate change it directly and indirectly, hence affecting their economic and social contributions. Various studies suggest that the changes in pasture growth, composition and production will be dependent on the actual combination of CO₂, temperature and rainfall conditions. Livestock productions under both intensive and extensive systems are subjected to so many stresses, where they undergo different types of physiological adjustments to cope up with stressful conditions. Productions are drastically reduced during stress and require managemental interventions both in terms of optimum nutrition and health care (Soren, 2013).

Introduction

Birds lack sweat glands; hence non-evaporative cooling mechanism (radiation, conduction and convection) is the major route of heat dissipation within thermoneutral range. Beyond this TNZ, majority of heat loss occurs as insensible heat loss i.e., Panting. Panting is one of the visible responses in poultry during exposure to heat stress associated with considerable energy expenditure. This specialized form of respiration dissipates heat by evaporative cooling at the surface of the mouth and respiratory passage. Panting increase, the loss of CO2 from the lungs, this leads to a reduction in the partial pressure of CO2 and also reduces bicarbonate levels in blood plasma. In turn, the lowered concentration of hydrogen ions leads to rise in plasma pH, a condition generally referred to alkalosis (Daghir, 2009). Birds also respond by reducing their feed intake and thus metabolizable energy (ME) intake to reduce thermo genesis as an adoptive mechanism. If panting fails to prevent their body temperatures from rising, the birds become listless, comatose and soon die due to respiratory, circulatory or electrolyte imbalances (Saif et al., 2003).

Introduction

The Intergovernmental Panel on Climate Change Fifth Assessment Report (IPCC, 2013) emphasized that warming of the climatic system is unequivocal and that anthropogenic warming will continue for centuries to come due to timescales associated with climate processes and feedbacks. While stresses caused by climate change are likely to negatively impact the agricultural and livestock sector and escalate existing small-scale farming challenges; agricultural and livestock productivity and sustainability have to improve to meet the needs of the growing human population (DEA, 2013; Zamykal and Everingham, 2009). Climate change is seen as a major threat to the survival of many species, ecosystems and the sustainability of poultry production systems in many parts of the world. Nevertheless, global demand for poultry products is expected to increase, as a result of the growing human population, and its growing af?uence. The extreme climatic conditions impose various stresses on poultry birds which adversely affect their growth, production and reproduction.

While climate change is a global phenomenon, its negative impacts are more severely felt by poor people in developing countries who rely mostly on the natural resource base for their livelihoods. Moreover, rural poor communities rely greatly for their survival on agriculture and poultry which belong to the most climate-sensitive economic sectors. Climate change is expected to intensify existing problems and create new combinations of risks and shift hazard zones. The incidences of draughts, snow-storms and blizzard like events have risen. The situation is made worst due to factors such as widespread poverty, inequitable land distribution, limited access to capital and technology inadequate infrastructure, long term weather forecasts and inadequate research and extension. Intensive poultry production has much less impact on global warming than organic or free-range production (Van der Sluis, 2007). Seo and Mendelsohn (2006) reported that small farms of poultry are better able to adapt to warming. However, organic egg production needs more energy than non-organic and increases most environmental burdens. The most disadvantageous, from environmental point of view, is litter-free breeding of birds which causes great amounts of liquid manure.

Introduction

There is an ongoing debate on global warming worldwide as it is seriously impacting climate change. The global temperature has been increased by 0.74±0.18°C during the last century and the climate model projections summarized in the Intergovernmental Panel on Climate Change (IPCC) report indicate that the global surface temperature will probably rise a further 1.1 to 6.4°C during the twenty-first century (IPCC, 2007). High ambient temperature is one of the most important stressors to poultry, which has a direct relationship on profitability of chicken meat and egg production. A seasonal problem in many parts of the world, high environmental temperature (35-43^oC in tropical countries) causes economic losses through reducing feed intake while decreasing nutrient utilization, live weight gain, egg production, egg quality and feed efficiency in poultry (Corzo et al., 2003; Panda et al., 2007a; 2008). The ideal temperature for broilers is 10-22^oC for optimum body weight and 15-27^oC for feed efficiency (NRC, 1994). Layers will produce egg constantly in the temperature range of 10-30^oC. Above 30^oC, performance in terms of growth and egg production declines.

Introduction

Statistics generally refers to information about an activity or a process that is expressed in quantitate as well as qualitative traits. The quantitative research process is well structured whereas the qualitative one is fairly unstructured. It depends upon how a piece of information have been collected and analyzed. A good researchers need to have both types of skill. This article highlights about the operational procedure, about methods, procedures and techniques that are used in analysis of climate related data.

Parameter vs Statistic

When a data is collected with survey of all the individuals (like in a census) and analysed for certain values, it is called a parameter. But when, we guess the same value with a random sample and interpret for whole population it is called a statistic. Environmental parameters are: mean, variance, correlation, regression, heritability, repeatability etc. Again, there are two types of variables: quantitative and qualitative. Quantitative variables can take any value in a specified range. So, they are of continuous type. But qualitative variables are very few types ( 2 ,3 or 4 types) and they are of discrete type. Body weight is an example of quantitative variable whereas, comb type is a qualitative variable.

The dynamic layer surrounding the earth above its surface containing various gases, moisture, aerosols, etc. is called atmosphere. Atmosphere can be defined as the gaseous envelope surrounding the earth. It is retained by earth’s gravity.

The atmosphere protects life on earth by absorbing ultraviolet solar radiation, warming the surface through heat retention and reducing temperature extremes between day and night. The common name given to the atmospheric gases used in breathing and photosynthesis is air. The atmosphere has a mass of about 5.15 × 10¹⁸ kg, three quarters of which is within about 11 km of the surface. The atmosphere becomes thinner and thinner with increasing altitude, with no definite boundary between the atmosphere and outer space. The imaginary ‘Karman line’ lies at an altitude of 100 km above the earth’s sea level, and commonly represents the boundary between the earth’s atmosphere and outer space. The study of earth’s atmosphere and its processes is called atmospheric science or ‘aerology’.

A big layer of air called the atmosphere surrounds the earth. The air within this layer moves from place to place when it warms up or cools down. This moving air is known as wind. In other words, air in motion is called wind. Winds move moisture and heat around the world and also produce much of our weather.

The strength of the wind can vary enormously. Sometimes air moves slowly and the wind is barely noticeable. When the weather is clear there may be a gentle breeze. When the wind is still very light, but it can be felt and there may be rustlings by leaves. At other times, the air can move very quickly and become a gale or hurricane, blowing down trees and damaging electric poles and buildings.

Winds are part of a global air circulation system that acts to balance temperature and pressure around the world. Different parts of the world receive different amounts of heat from the sun. This differential heating in turn results in differences in temperature and air pressure around the world, which drives the world’s winds.

As equatorial areas are heated most, the air above them warms and rises as it becomes lighter than the surrounding air, causing an area of low pressure. In cooler areas, the air sinks because it is heavier and results in an area of high pressure. Winds will blow as air is squashed out by the sinking cold air and drawn in under the rising warm air. Any difference in temperature like this will always cause a difference in air pressure, and therefore winds will blow. These movements result in a global wind pattern, with air moving between different areas around the world and also at different heights in the atmosphere. Colder air from the poles tends to sink and move towards the equator closer to the surface of the earth. In contrast, warm air from the equator rises and moves towards the poles high in the atmosphere because it is lighter.

8.1 INTRODUCTION

Orchard is a place or a piece of land where different kinds of fruit plants are planted in orderly manner and managed efficiently for production of successive yield to get assured economic return. An orchard being capital-intensive and long-term venture careful planning, layout, selection of site, preliminary operations etc. are to be done. It is easy to establish an orchard considering its features critically but difficult to manage afterwards. It needs high managerial skills and technically skilled manpower to carry out different orchard operations. Any lapses in management can lead to incur heavy loss.

18.1 INTRODUCTION

The decline in productivity of old and senile orchards existing in abundance has become a matter of serious concern for the orchardists, traders as well as scientists. In India 30-35% area under fruit crops is occupied by old, senile, and pest-and-disease- affected orchards. For overcoming the problem of unproductive and uneconomic orchards existing in abundance, large scale uprooting and replacement with new plantations will be a long term and expensive strategy. Thus, rejuvenation of old and senile orchards is a good alternative.

2.1 Introduction

The name thermodynamics stems from the Greek words therme (heat) and dynamis (power), which is most descriptive of the early efforts to convert heat into power. It may be defined as the science that deals with the relations among heat, work and properties of a system. Today, thermodynamics is broadly interpreted to include all aspects of energy and energy transformations, including power generation, refrigeration, and relationships among the properties of matter. It is viewed as the science of energy, and thermal engineering is concerned with making the best use of available energy resources.

Thermodynamics basically entails four laws or axioms known as Zeroth, First, Second and Third law of thermodynamics.

The zeroth law deals with thermal equilibrium and establishes a concept of temperature.

The first law pertains to the conservation of energy and introduces the concept of internal energy.

The second law indicates the limit of converting heat into work and introduces the concept of entropy.

The third law defines the absolute zero of entropy.

The concept of energy was introduced by Newton in the field of mechanics during generalizing the hypothesis of kinetic and potential energies. Energy may be defined as the capacity to do work and it is a scalar quantity. It cannot be seen or observed. Its presence can, however, be felt by the properties of the system. There occurs a change in one or more properties of the system in case of energy transfer. The absolute value of energy of a system is difficult to measure, whereas the energy change is rather easy to calculate. Energy follows the conservation law, one of the most fundamental laws of nature, which simply states that during an interaction, energy can change its form from one form to another but the total amount of energy remains constant, that is, energy cannot be created or destroyed only form can be changed.

14.1 Introduction

Hydro-electric power is electricity produced by the movement of fresh water from rivers and lakes. Gravity causes water to flow downwards and this downward motion of water contains kinetic energy, that can be converted into mechanical energy, and then from mechanical energy into electrical energy in hydro-electric power stations. (“Hydro” comes from the Greek word hydra, meaning water). At a good site hydro-electricity can generate very cost-effective electricity.

Abstract

Any country’s socio-economic development essentially depends on land and water resources. Resource depletion takes place when there is an overstretching due the exploding population, calling for prudent management of the resources. Application of remote sensing and Geographical Information System (GIS) tools in the management of natural resources at different levels including watersheds is quite well known. In addition, applied geoinformatics are also used in research on management of these delicate resources also besides characterization. There is a continuous advent in technology in both hardware and software necessitating updation of application scientist/manager. Once an exclusive tool of elite institutions and government agencies, GISnow became an indispensible part of our day-to-day life. As the urge for information intensifies, new applications of GIS continue to evolve. A concerted effort is needed to develop an information system when vast expanses of natural resources are to be managed and a combination of information tools like remote sensing, global positioning system and GIS always updates the database effectively. However, the cost factor should not hinder the applications at micro level. This necessity calls for attention to popularize free and open sources of software (FOSS) and data (particularly digital elevation models (DEM) and satellite imagery) to put the techniques into use by enthusiasts at village level such that a database at a regional level can be built through participatory GIS. It is in this direc tion the av ailab le li terat ure on appl ied geoinformatics coupled with use of FOSS is reviewed and presented in this article to give an idea as to how an open ended information system could be developed to help the management.

Keywords: Natural resources, management, Remote sensing, GIS, FOSS, DEM

Abstract

This study was conducted at Directorate of Cashew Research (DCR) Puttur, D.K., Karnataka during 2007-12. In this study, a methodology was standardized to find the area under cashew, barren areas and other areas for expanding cashew cultivation with remote sensing. It was found that the images pertaining to the month of November was best for classifying cashew since the colour of cashew leaves changes during that period. Also, the LISS III images were found to be good for identifying cashew. It was not possible to differentiate between cashew seedling area and cashew graft area using LISS III or LISS IV images. A spatial database of soil moisture was prepared for the irrigation scheduling in cashew and a spatial database of major nutrients was prepared for the site specific nutrient management in cashew gardens. A spatial database of land slope and stream orders was prepared using GIS and suitable soil and water conservation interventions were suggested for the selected area.

Keywords: Cashew, GIS, remote sensing

Abstract

The weather or climate is a natural resource and is an important basic input in agricultural planning and strategies. Every plant process, related with growth, development and yield of a crop and each of inseason and off-season farm operations (according to World Meteorological Organization) is more than 10 per cent and can reach up to 50 per cent in smaller areas and not a surprise even if it reaches to 100 per cent on micro scale. Amongst the various weather elements, temperatures, radiation and rainfall play major role in deciding the crop growth and yield levels. Precipitation is one of the important weather factors being responsible for atmospheric and soil moisture and therefore has more agricultural importance, especially in rainfed agriculture.

Keywords: Remote sensing, weather, agroadvisory, GIS

1.0 Introduction

India receives more than 70 per cent of its annual rainfall during South West monsoon season. Indian summer monsoon rainfall shows large intra - seasonal and intra-annual variability (Parthasarathy, 1960; Alexander et al., 1978; Mooley and Parthasarathy, 1984) and also changes in space and time, intensity and distribution. Borgaonkar and Pant (2001) have reported that Indian monsoon rainfall has shown trend less nature since 17^th century based on proxy data with large inter-annual fluctuations. IPCC (2001) has reported increase in rainfall over tropical and higher latitudes and decrease in rainfall over subtropics and mid latitudes.

Abstract

Natural resources and agricultural production processes vary spatially. Capturing the spatial variations in data and knowledge of natural resources and production processes has been a major challenge for efficient and sustainable management of agricultural production systems. Geographical Information Systems (GIS) provide an effective platform for storing and mapping spatial data and modeling the relevant processes. Huge volumes of geospatial data on specific themes such as soils, water, climate, and other natural resources, are being collected by public and private agencies. However, currently it is difficult for most users to access the data and integrate them into a GIS platform to derive useful information and knowledge for specific applications. There is a need to create geospatial data and knowledge systems that can provide efficient, on-demand and remote access of spatial data to users to enable development of a variety of GIS applications for agricultural and natural resources management. The design of a prototype geospatial library to provide web-based access to geospatial data, services, and learning and knowledge resources that can support agricultural and natural resources management is presented. The design is scalable and sufficiently general to allow a range of agricultural and natural resources management applications across different spatial scales.

Keywords: Agriculture, GIS, Geospatial library, Knowledge Management, Natural Resources

Abstract

The objective of the study is to build a framework of Geo-spatial Information System for effective decision making by empowering all the stake holders with spatial and non-spatial data. The Interface of this information system is developed as a deployable windows application using Map Objects in Visual Basic programming language with MS Access database. The practical utility of the proposed information system was explained with a case study in Aquaculture. This geo-spatial information system provides required information through maps based on spatial and attribute quarries. These dynamic maps help in taking effective decisions.

1.0 Introduction

Computer based information systems proved to be very efficient and effective tools for managing data and information to aid in decision making . FAO (2000) proposed agricultural knowledge and information system for rural development (AKIS/RD) to link rural people and institutions to promote mutual learning and generate , share and utilize agricultural technology , knowledge and information. This serves as vehicle for sharing ideas and principles with various stake holders addressing the problems and seeking solutions to rural development. Although the rural development planning is top-down prescriptive approach , in reality the decisions are made by the stake holders based on their perspectives, knowledge and priorities. Problems particularly related to environmental impacts are location specific and contextual. Geo-spatial technologies may serve as better vehicle to store and share all kinds of location specific data and information. The state of mapping and management of geospatial data changed during the recent years with the diffusion of modern geospatial information technologies such as GIS(Geographic information system), GPS(Global positioning system) and image analytical system for remote sensing(RS) data. Adinarayana et al., (2008) proposed a geographical information and communication technology (Geo-ICT) based information system called Grama Vikas( rural development) to assist the user in analyzing the rural information for rural development, planning . During the recent years there is a paradigm shift in GIS applications for rural development particularly in developing countries, by way of integrating top-down approach with bottom-up approach by the stake holders who stand to be affected by the decisions based on these technologies. Emerging concepts include “ community - integrated GIS”, “GIS in participatory research” and ‘participatory GIS”. (Abbot et al., 1998)

Abstract

Any naturally occurring phenomena varies both in space and time. This variability is a result of various natural process and hence deterministic. Geostatistics is a tool to help us to characterize spatial variability and uncertainty resulting from imperfect characterization of the variability. Geostatistics involves the theory of regionalized variables, which dates back to the early fifties and includes concepts of random function and stationarity. Geostatistical mapping can be defined as analytical production of maps by using field observations, explanatory information, and a computer program that calculates values at locations of interest. There area number of spatial prediction models depending on the amount of statisticsinvolved in the analysis. Kriging is a generic name adopted by the geostatisticians for a family of generalized least- squares regression algorithms and various kriging algorithms viz., punctual kriging, block kriging, co-kriging and universal kriging are explained in this paper. Applications of geostatistics can be found in many varied disciplines ranging from the geology to soil science, hydrology, meteorology, environmental sciences, agriculture and even structural engineering and some of its applications are summarized in this paper.

Keywords :Geostatistics, spatial variability, kriging, model

Alimentary canal : The endoderm is formed by delamination in mammals and birds. This endoderm surrounded by splanchnic mesoderm forms the gut. The endoderm underlying the embryonic disc and serving as a flat roof to the early yolk sac becomes gut endoderm. At 20^th day a rapidly expanding embryonic disc begins to fold into a cylindrical embryo. The gut endoderm also participates as a component layer. Folding first into the head end and then into the hind end of elongating embryo this endoderm necessarily takes the form of the two internal blind tubes. The open end of the each tube where it becomes continuous with the yolk sac is called an intestinal portal while the tubes are named the foregut and hindgut. The caudal end of the hindgut is cloaca. An intermediate region opening ventrally into the yolk sac through the narrower yolk stalk is midgut.

This practical assignment is conceptualized and operationalized to understand various tools and techniques in conducting a PRA at the village level and help students in understanding their application in village development planning.

PURPOSE

To get students acquainted with the PRA tools and techniques and their application in village development programme

This assignment is associated with the identification and recognition of different characteristics and features related to entrepreneurship development within the individual.

PURPOSE

 To make students acquainted with the characteristics favorable for entrepreneurial activity of people.

 To help the students develop their skill in identifying the entrepreneurial traits one can have within him/her.

Maize is presently the crop with growing importance in the state. Earlier it was primarily grown for human consumption only. In view of rapidly increasing demand of poultry feeds and fodder in Assam presently it has more use in some small industries. It is the raw material for most of the feed industries. Presently the crop has state acreage of 27953 hectare and production of 93179 tonnes with a productivity of 3333 kg/ha (2014-15).

While most other states in India are gradually moving away from their traditional agriculture based economy toward industry or service oriented economy, Assam is still predominantely dependent on the agricultural sector. While the sociopolitical problems afflicting the state since the last few decades are partly to blame for a lack of conducive environment for economic development of the state, particularly in industry or service oriented areas, there are various economic reasons (e.g. fragmented land) responsible for the lagging agricultural sector in the state. Economy of Assam is fundamentally based on agriculture. Over 70% of the state’s population relies on agriculture as farmers, agricultural laborers, or both for their livelihood.

Assam produces both food and cash crops. The principal food crops produced in the state are rice (paddy), maize (corn), pulses, potato, wheat, etc., while the principal cash crops are tea, jute, oilseeds, sugarcane, cotton, and tobacco. Although rice is the most important and staple crop of Assam, its productivity over the years has not increased while other crops have seen a slight rise in both productivity and acreage.

Introduction

The book has been framed as a text book cum vegetable production manual for both under graduate and post graduate students of Agriculture/ Horticulture as well as commercial vegetable production professionals. This book has been oriented on different management practices of vegetable culture in open field condition viz., Classification of vegetable crops, Management of seedlings in the nursery, Water managent, Plant nutrient management, Pollination management, Integrated pest management, Biological management of diseases, Weed management and Production technology of different vegetable crops.

Classification of vegetable crops

Vegetables are defined as herbaceous plant origin material with generally low calorific value providing micronutrients, vitamins, antioxidants, fibre and induce alkaline reaction inside human body. Vegetable crops are not only botanically different but also their cultural and climatic adaptation shows wide variability. It is, therefore, necessary to classify the vegetable crops for their easy recognition. Vegetable crops can conveniently be classified “Botanically” for the purpose of vegetable breeding and according to “Method of culture” from the point of crop husbandry.

Botanical classification

The crops used for vegetable purpose in the world belong to 1200 species under 78 families and of them, more than 860 species under 59 families belong to dicotyledoneae and about 340 species under 19 families belong to monocotyledoneae. In the tropical and subtropical parts of the world, about 90 species of vegetable crops are cultivated, but hardly 20 of them are commercially important.

In the present botanical classification, over 140 different vegetable crops under 6 monocotyledoneae and 20 dicotyledoneae families have been included.

Limitations of Bacteria

• Normally genetically engineered bacteria are very useful for the large scale production of valuable eukaryotic proteins.
• Bacteria grow rapidly, They grow on relatively simple media, they are easy to handle, they are easily transformed, they can grow on wide range of substrates, they multiply, fast, they contain simple and well characterized genome, they can be easily modified but even though, they have their own problems…

1. Bacteria do not have intrudes and so they do not have any system or machinery to remove introns.
2. Many eukaryotic proteins undergo different types of modifications after they are produced. These modifications are known as “post translation al modifications”.
3. Each bacterial cell usually contains many copies of the plasmid but there is no mechanism to ensure the equal distribution of plasmids in daughter cells.

A close relationship between the mode of reproduction of a cultivated plant and the methods to be employed for its improvement is now well accepted. Crop plants are broadly placed in two groups according to the mode of their reproduction: sexually reproduced and asexually propagated or reproduced plants. Asexual reproduction does not involve the union of gametes and/or reduction in chromosome numbers.

Plants may reproduce asexually in a variety of ways. In 1980, Mayo has identified the following methods of asexual reproduction on the basis of the classification made earlier by Stebbins in 1941 and Brown in 1972.

2.1. Open source satellite data

The satellite images have been invaluable information sources for Natural Resource Management. They provide synoptic view of the Earth periodically helping in inventory, surveying, and monitoring in agriculture, hydrology, geology, mineralogy, land cover, land use and environment. Free global satellite image data of spatial resolutions of 1m to 1 km and spectral resolution of single band to hyperspectral are available from an increasing number of sources (Table 2.1).

Coordinate Reference System (CRS) is a framework of coordinate based local, regional or global reference system used to represent the locations of geographic features. Coordinate Reference Systems (CRS) provide a standardized way to define the real-world geographic locations which further enable us to use common locations of geographic datasets for integration. The datasets from different sources and CRS are transformed to a common CRS in order to perform various integrated analytical operations like overlaying of data layers. Coordinate Reference Systems are mainly of two types:

1. Geographic Coordinate System: This is global or spherical coordinate system in which locations of features on earth are defined in terms of latitude and longitude values. Latitude and longitude are angles based on a point at the centre of the earth. In this system, locations are defined by degrees, therefore, distances cannot be measured accurately. The most common geographic coordinate system is the World Geodetic System 84 (WGS84).
2. Projected Coordinate System: In this system, locations of features are defined using cartesian x, y coordinates on a flat, two – dimensional surface. This system is based on sphere or ellipsoid projected on flat surface. Projected Coordinate System are generally referred as projec- tion. It is required for preparing maps on paper or computer screen. Un- like Geographic Coordinate System, projected coordinate system has ac- curate measurements of distance, angles and areas across the two dimen- sions. However, there is alwaystrade-offs between area, direction, shape, and distance in this system due to distortions created while representing ellipsoid or spheroid on a flat map. So, the projection type is selected based on its application. Most common projections are Universal Trans- verse Mercator (UTM), Lambert Conformal Conic and Albers Equal Area.

Many times, users have to work with raster datasets of different spatial and radiometric resolutions. So, there is requirement of bringing their resolutions to the same resolution in order to facilitate their processing. Resampling is the process of deriving pixel values from the existing image to the new raster image of different pixel size. Resampling is most common pre-processing step in remote sensing. It is done both at spatial and radiometric scale. At spatial scale, resampling is done either to increase the spatial resolution i.e. decrease pixel size known as Upsampling or to decrease the spatial resolution i.e. increase pixel size known as Downsampling. Radiometric resampling is performed to increase or decrease the radiometric resolution of the image. In R, resampling of raster image is performed by raster package. The details of the resampling methods and their respective R – code with examples are discussed in this chapter.

First of all, we need to import the raster image on which we wish to perform resampling operations by using following R – code. In R, resampling is feasible on one band only. So, we will import single band raster image.

Particle-size distribution is one of the stable soil characteristics, being little modified by agricultural management practices. The particle-size distribution expresses the proportion of various size particles in a soil, especially sand, silt and clay that determine soil texture (Hillel, 2004). Soil texture is closely related to soil physical properties such as water retention and release characteristics, surface area, swelling and shrinking, soil strength and tillage properties. There are two common methods being employed for particle-size (<2.0 mm) analysis namely international pipette method and the hydrometer method. Both the methods are based on Stokes’ law which establishes a relationship between particle size and the rate of sedimentation. Thus, particles are assessed by their settling velocities from suspension in a water solution that can be used to quantify particle size. Size range of soil particles (sand, silt and clay) according to two most adopted systems i.e. U.S. Department of Agriculture (USDA) and International Union of Soil Science (IUSS) formerly known as International Society of Soil Science (ISSS) are given below:

Introduction

Many of the globe’s major food crops viz., wheat, rice and vegetables have reached “yield stagnation” or “yields plateau”. This can be attributed to the land degradation and soil diminishing capacity to supply nutrients at the required rate due to over mining of essential nutrients. Further, imbalance use of fertilizers and lesser use of organic manures over the years have badly affected the soil health. To bring back life to the soil and relieve it from nutrient stress; fertilizers and manures/bio-fertilizers have to be applied in a scientific manner. At the same time, their indiscriminate use can result either in their under utilization and toxicity or leaching to the lower horizons, leading to underground water and create pollution problems. The soil is also the main source of sixteen mineral elements identifies in view of their importance for plant growth. These are N, P, K, S, Ca, Mg, Na, Fe, Mn, Zn, Cu, Mo and Cl (Tisdale et al., 1985). Nitrogen, potassium and phosphorus have been designated as major nutrient elements in order of their removal by the plant; sulphur, calcium and magnesium as secondary nutrients while zinc, copper, iron, manganese and molybdenum are called micro nutrients as these are taken by plant in traces. 
Nutrients need of vegetables depends upon the yield response to applied nutrients from fertilizers, agro-climatic conditions, variety and nutrient availability from the soil pool. The nutrient status of the soil further depends upon the quantity of total and available nutrients present in the soil pool. The soil tests helps in selecting the proper manuring schedule for various crops in a sequence by knowing about the nutrient build up or depletion in the soil profile. The adequacy of soil testing methods to correctly predict the fertilizer needs varies with the soil type, climate/soil moisture and crop species. The rainfall also influences the efficiency of soil testing methods, especially nitrogen and potassium when it becomes imperative to have tissue analysis for modify the fertilizer recommendations. Plant tests also help to identify the nutrient deficiency in standing crop and in the event of deficiency of a particular nutrient helps in taking corrective measures (Sud 
et al., 2008).

Now we have to learn how to enter numbers and text, how to edit any erroneous entry and then how to do simple calculations. Open empty excel spread sheet by clicking on the start menu in the window tool bars, click on Programs and then click on the Excel menu item.

6.1 Entering Numbers

Numeric entries are constant, can be integers, decimal fractions, integer fractions and scientific nations which can be entered by typing the number in the active cell [cell which can be made active by clicking the mouse on the cell.

Mole

A mole is defined as the amount of chemical substance containing exactly 6.022 140 76 × 10₂₃ numbers of constitutive particles such as atoms, ions and molecules. This number is a fundamental constant named Avogadro’s number in honor of Italian scientist Amedeo Avogadro. This constant is properly reported with an explicit unit of “per mole,” and rounded version being 6.022 × 10₂₃/mol.

This definition has been adopted since November, 2018 revising the old definition based on the number of atoms in a sample of pure ₁₂C weighing exactly 12 g. Thus, as per the definition, 1 mole of any element contains the same number of atoms as 1 mole of any other element. However, the mass of 1 mole of a particular element is different from that of another element.

Molar mass

Molar mass of an element (or compound) is the mass in grams of 1 mole of that substance, a property expressed in units of grams per mole (g/mol).

The digestive system consists of organs concerned with prehension and digestion of food, absorption of digested food and expulsion of unabsorbed food. The digestive system extends from lips to the anus and consists of the primary and accessory organs of digestion. The primary organs include the mouth, pharynx and the alimentary canal (gastrointestinal tube) in that order of sequence. The accessory organs include the tongue, teeth, salivary glands, liver and pancreas. The alimentary canal extends from pharynx to anus and consists of the oesophagus, the stomach, the small intestine and the large intestine. The wall of the alimentary canal consists of, from within outward, the mucous membrane, the muscular layer and the serous layer forming the visceral peritoneum.

Mouth

The mouth is bounded dorsally (roof) by hard palate and behind that the soft palate, ventrally by the body of the mandible along with the mylohyoideus muscles and laterally by the cheeks. The entrance of the mouth cavity is bounded by the lips and it is called as rima oris, while its caudal opening into the pharynx is called as aditus pharyngis. The cavity of the mouth (cavum oris) is subdivided into two parts by the teeth and alveolar processes (the alveoli) of the mandible. The inner part i.e. the space within the teeth and alveoli is termed as mouth cavity proper, while the space between the cheeks and lips and the teeth and alveoli is called the vestibule of the mouth. The mucous membrane of the mouth cavity is continuous with the margin of the lips and the common integument and caudally it continues with the mucous membrane of the pharynx.

The nerves of the head connect the central nervous system i.e. brain with the structures like skin, muscles, glands, blood vessels, organs of special senses etc. so as to monitor or control their functioning. These nerves are the cranial nerves and their branches. There are twelve pairs of cranial nerves.

Olfactory nerve (Cranial nerve I)

The olfactory nerve is the first cranial nerve and is known as the nerve of sense of smell. It consists of fibres which are the axons of olfactory cells of olfactory part of nasal mucous membrane. These fibres are nonmedulated and they form number of small bundles which are enclosed into connective tissue sheaths derived from the meningeal layers of the brain. These nerve fibres bundles pass caudally upward through the cribriform plate of the ethmoid bone and enter the cranium to join the olfactory bulbs of the brain. Besides the olfactory nerve bundles there are two more nerves that extend from the nasal mucous membrane, traverse through the cribriform plate and join the parts of the brain. These include the vomeronasal nerve that is formed by the nerve fibres arising on the vomeronasal organ and terminating on the accessory olfactory bulb of the brain. The other one is the terminal nerve that after reaching the brain joins the olfactory trigone.

Woman is an incarnation of ‘Shakti’the Goddess of Power. If she is bestowed with education, world’s strength will double. Let the campaign of ‘Kanya Kelavni’ be spread in every home; let the lamp of educating daughters be lit up in every heart across the regions and religions of the world.

Abstract

Globalization defines a new process of economic integration which is fuelled by neoliberal ideals claiming that an unregulated market economy maximizes economic efficiency and growth. Concept of equability and women empowerment provides durable strength and sustainable development to the programs aimed at promotion of commerce and trade through globalization. The post 2015 Development Agenda have not done much to address the large inequalities and discrimination against women. Global initiatives designed to benefit the daily lives of women and girls not being implemented effectively. This is especially for decision making and financial systems. The right to women needs to be ensured in order: to participate in the elaboration and implementation of development planning at all levels, to have access to adequate health care facilities, including information, counselling and services in family planning, to benefit directly from social security programmes, to obtain all types of training and education, formal and informal. All forms of discrimination against all women and girls everywhere must be ended. Out of the seventeen sustainable development goals (SDGs), not even the single one will be achieved without including women and girls as equal partners. All countries hold the same responsibility to ensure the full implementation of the 2030 Agenda for Sustainable Development within their own borders, and to support other countries in achieving the SDGs which includes reaffirming and contributing to the fulfilment of gender equality. Women and girls have to be equal partners in sustainable development.

Abstract

Women make up almost half of the agricultural labour force in developing countries (43 per cent according to UN Women data). Empowerment of women is central to achieving the objective of inclusive, equitable and sustainable development. Between the period 2007-08 and 2009-10, the share of person-days in casual employment in MANREGS to the total person-days in all economic activities has also increased. The increase was marginal for male workers but significant for female workers. This again confirms that female workers have been the largest beneficiaries of MANREGS projects. The share of female participation in these public works is more than the share of their male counterparts. The survey shows that women comprise only 13.76% of the total entrepreneurs, i.e., 8.05 million out of the 58.5 million entrepreneurs. Among the states, the largest share in number of establishments under women entrepreneurship is of Tamil Nadu (13.51%) followed by Kerala (11.35%), Andhra Pradesh (10.56%), West Bengal (10.33%) and Maharashtra (8.25%). Average employment per establishment for women owned establishments is 1.67. The main challenges that women face in business are educational and work background, balancing their time share between work and family, problems of raising start-up capital, difficulty in borrowing fund, thought-cut completions endangered existence of small companies, problems of availing raw- materials access to export market without intermediaries, as well as an overall psychological barrier on the part of banks, suppliers, and clients alike. Govt of India and different bodies such as NGOs, voluntary organizations, self-help groups, institutions and individual enterprises from rural and urban areas are active to help the women entrepreneurs in their ventures.

Abstract

India is one among the major fruit producing countries of the world and offers opportunities of women empowerment through quality fruit production, planting material generation and production of value added products. There is a great opportunity to increase and improve the production of tropical, subtropical, and temperate fruits. Underutilized fruits also have a huge potential waiting to be exploited. This will only be possible with a concerted effort by researchers and growers, especially women to improve quality and increase production based on consumer demand and export potential. Women play significant role in fruit production activities. Unfortunately their access to knowledge, technology, finance, information, and training is minimal which hampers productivity of fruit crops. The mode of female participation in agricultural production varies with the land owning status of farm households. Their roles range from managers to landless labourers. In all farm production, women’s average contribution is estimated at 55 percent to 66 percent of the total labour with percentages much higher in certain regions. About 48 percent of India’s self-employed farmers are women. Thus, rural India is witnessing a process of transition which could be described as feminization of agriculture particularly fruit crop cultivation and their post harvest management. Women play an active role in various production and postproduction activities of horticultural crops. The number of women engaged in horticulture has increased continuously in the past two-three decades due to various factors such as migration of men to urban areas in search of non-farm income, increase in the demand of labour force in construction and other sectors. The data on the women involved in horticulture sector are scanty however the involvement of women in various operations of cultivation and post harvest handling and storage is very high because of entrepreneurial nature of horticulture. There is need to adopt collective and SHG approach to take women contributions to socio-economic significance. Thus horticulture, especially the pre-harvest and post harvest management of fruit crops have considerable employment avenues for women and make horticulture an effective subject of women empowerment.

Abstract

Cattle are reared for milk and dry periods are considered loss to the exchequer of livestock farmers. To avoid it, farmers mostly abandon the cattle to become stray animals. Latest research supports that cow dung and urine are endowed with versatile medicinal, biofertilizer and bio-pesticide properties of socioeconomic importance. This has given the concept of dry cattle farming where focus is utilities of cow dung and urine and their value added products. Cow urine is useful for numerous human ailments like, cancer, osteoarthritis, allergies, kidney failures, skin diseases, healing of wounds etc. Cow dung is main source for vermicompost, FYM and biogas. Many products containing cow dung and urine i.e. soap (23% cow dung content and 7% urine), toothpaste (10% cow dung content and 10% urine, 2% Ghee), floor cleaners (Gaunyle: 11% cow urine), hair oil, incense shaving cream, face wash, talcum powders and dark circle removers are available in the market. The term cowpathy has been coined for diverse uses of cow dung and urine and is now focal area of research and innovative products development. Further, the dry cattle farming offers solution to problems of stray animals and helps in empowering the women farming community to exploit dry farming for more profit, product development and economic strengthening.

Abstract

Mushroom cultivation is a women friendly entreprise. High benefit cost ratio, easy and cheap availability of agro-wastes and congenial weather conditions make adoption of mushroom cultivation a lucrative source of rural women empowerment. The rural and tribal farm women can adopt agriculture based agribusiness on individual or group level and raise their income and employment opportunities which make them economically and socially empowered. Mushroom production, Bee-keeping, Dairy, Goatery, Seed production, cultivation of fruits, flower and vegetables can increase the income of rural and tribal farmers up to 70-80%. Mushroom production can be adopted even by landless rural women. Further value-added mushroom products provide good potential for entrepreneurs in view of the growing demand. The focus of Indian mushroom industry is predominantly on trade of the fresh produce rather than the real value-addition. Almost entire domestic trade is in the fresh form while most of the export is in the preserved form (canned or steeped). Current era is characterized by greater awareness about quality and, above all, with the demand for the readymade or ready-to-make food products. Technologies for production of some other products like mushroom based biscuits, nuggets, noodles, papad, candies, pickle and readymade mushroom curry have been developed and trainings need to be imparted to the stakeholders. Attractive packaging of the value-added products is yet another area called the secondary value-addition which can add to profit of the entrepreneurs.

Abstract

Indiscriminate and intuitive applications of the synthetic pesticides have adversely affected the ecological balance, resulting in pest resurgence, development of resistance in the pest species and environmental pollution. Biocontrol agents are now available to contain effectively diverse diseases and pests of various major field, fruit and vegetable crops with the result their demand in market has enhanced several folds but low production and scarce availability is a major constraint in their large scale adoption by farmers. While as now protocols for mass production of a number of biocontrol agents have been standardised and simplified, these can now be adopted by the unemployed educated youths to start entrepreneurship for self employment. In order to empower and improve the women farmers’ productivity, they need to have proper farm training and capacity building programs to compete various challenges in their rural livelihood and mass production of bio-control agents is an emerging enterprise with commercial potential. The Indian bio-pesticide market stands at over US$127 million (7-8% of the global market) and is expected to triple by FY20. The research efforts at the ICAR institutes and SAUs have been targeted to relieve women of the drudgery by providing technologies, time and labour saving tools with good market linkage. Women self help group with proper training can start their own bio-pesticides units for which finance with subsidy is available.

Abstract

Rural women play a vital role in farming system operations and contribute substantially in the physical aspect of farming, livestock management, postharvest and allied activities. Around 43% of the agricultural labour force of developing countries is composed of women dependency. India has achieved self sufficiency in agricultural production, but a considerable amount of production gets spoiled in every year due to inadequate post-harvest management, processing, infrastructure and skill. To uplift the livelihood and economic conditions of the rural women there is an urgent need to impart trainings for skill development regarding the value addition of horticultural crops. This offers tremendous opportunities for women occupation but also inculcate entrepreneurial characteristics in them. Trainings and skill development are useful for rural women as they can add more value to the seasonal fruits and vegetables and generate varieties of products namely Pickle, Murabbaa, Chutney, Jam, Sharbat etc. These efforts enhance their family income by around 30-40 thousands per annum as they fetch more prices of raw produce after processing. Moreover during peak production times glut only promote produce and profit loss. Instead of direct marketing of their produce they can do value addition of their produce and then sell them in market, it not only increases the value of their products but the prices also enhance by many folds. After giving training to rural women, they are motivated to go for self marketing of their produce at domestic and village level. Similar way these trainings can transform the life style and income level of farming families comprehensively.

Abstract

India is an agriculture based country and livestock production is an integral component of farming system and it is generally considered a key asset for rural livelihoods. It offers advantages over other agricultural sectors and it plays a crucial role in the rural economies of developing countries like India. Livestock provide high quality food, cash income and employment. Livestock production is largely in the hands of women. Most of the animal farming activities such as fodder collection, feeding, watering, and health care, management, milking and household-level processing, value addition and marketing are performed by women. Besides, considerable involvement and contribution of women, gender inequalities also exist in Indian villages. Therefore, there is a need to correct gender bias in livestock sector. Efforts are needed to increase the capacity of women to negotiate with confidence and meet their strategic needs.

Insect infestation occurs in stored grains and grain products to variable extent depending upon the storage conditions in developing countries. The losses of nutritional compounds are proportional to the extent of insect infestation, nature of insect feeding and distribution of nutritional chemicals in different seed components.

1. Sources of Insect Infestation

There are many sources that leads to infestation in storage, viz., left over seed from bins or stores or spilled seeds under the stacks, cleanings, sweepings of storage structure, processing plants, old infested stores, old gunny bags, insect infested transport vehicles, storing insect infested seeds with fresh stock or vice-versa, entry of insects from neighbouring stores and carry over of field infestation