eChapters

The difficulty in conducting a factorial experiment in an RBD is that, as the number of factors and/ or that of levels of the factors increase, the number of treatment combinations to be compared increases too. This in turn necessitates use of large sized blocks to accommodate all the treatment combinations i.e in a 2^4 – experiment there should be 16 plots in a block. But it has been found that the experimental error increases with an increase in the size of a block, for then it becomes less effective in controlling the heterogeneity of the units. A remedy has been found out : this is to divide a replicate (a complete block) into a number of equal blocks (incomplete blocks) and then to allocate the treatment combinations to these blocks so that only the unimportant treatment comparisons gets mixed up or entangled with the block comparisons. These treatment comparisons are then said to be confounded or mixed up with block effects. These effects cannot be separately tested or estimated. But the remaining treatment effects, which are not confounded with the block effects, are still capable of separate estimation and testing.

Split-plot Design

In field experiments, sometimes a factor has to be applied to a large experimental unit. This is true when the different methods of ploughing or irrigation are to be compared. And in such cases it is possible to introduce a second factor, which does not require large plots, with a small number of levels into the same experiment, at a little extra cost. This is done by splitting the plots (called whole plots of the first factor into as many sub-plots as there are levels of the second factor.)

A split-plot design with an RBD for the first set of treatments (called “the whole-plot treatments”) is obtained by allotting the whole-plot treatments at random to the whole plots of a block and then randomizing the second set of treatments (called “the sub-plot treatments”) to the sub-plots within each whole plot.

This enables us to test for the main effects of the sub-plot treatments and the interaction of the whole-plot treatments and the sub-plot treatments more efficiently than the main effects of the whole-plot treatments in a split-plot design.

1.1 Classification

The raw or ungrouped data are in unorganized form and need be organized in meaningful and readily comprehensible form in order to facilitate further statistical analysis. Classification of data is the first step in this direction. It is the process of arranging thing in groups according to their resemblance and affinities. There are two basic types of classification namely-qualitative and quantitative. In qualitative classification, the basis of classification is some attribute or quality like: sex, literacy, religion, etc. A qualitative classification may be simple or manifold. The classification done with respect to one attribute is termed as ‘Simple Classification’. The classification in which two or more attributes are considered and several classes are formed is called ‘Manifold Classification’. In quantitative classification, the collected data are grouped in respect of characteristics, which can be measured and numerically expressed such as height, weight, etc.

4.1 Diagrammatic Representation of Data

Diagrams are meant only to give a pictorial representation of the data with a view to make them readily intelligible. Several types of diagrams are used for the presentation of data in biological and agriculture sciences. The following are the important types of diagrams in common use :

1. One-dimensional diagrams
2. Two-dimensional diagrams
3. Three-dimensional diagrams

13.1 Introduction

In 1935 Prof. Ronald A. Fisher laid the foundation for the subject in his monumental work entitled “The Designs of Experiments”. Experimental designs concern the arranging of treatments or variables in such a manner that the inferences and conclusions regarding the effects of these treatments can be easily done and their reliability measured. Experiments are made with a view to find the validity of a particular hypothesis and to have an idea about the extent of the reliability that can be placed on a particular conclusion arrived. The selection of the design will have a very great bearing on the accuracy of the ultimate results. By a random selection of experimental units it is possible to remove the ambiguity about the casual interpretation of the observed associations. Random sampling is the most essential ingredient of all experimental designs. Besides, there are many devices for increasing the precision of the inference and the calculations.

Introduction

The concept of Computer Aided Design (CAD) for landscape gardening is comparatively new. It can be defined as design and drafting of a landscape garden with the aid of computer. It can also be defined as use of information technology in garden designing. The core of the CAD system is software, which makes use of graphics for product representation. Computer aided designing is an important industrial art, extensively used in industry and landscape architecture designing and for many more purposes. For landscape designs, it represents a practical solution for the imperative needs of helping to visualise the future. Now-a-days, CAD is used to create 2D or 3D computer models. CAD assists the designer

For maintenance of garden, a person should well acquainted with different types of tools and implements and their uses. A tool and implement is any physical item that can be used to achieve a goal, describe a procedure or process with a specific purpose. Tools that are used in particular fields or activities may have different designations such as instrument, utensil, implement, machine or apparatus. The set of tools needed to achieve a goal is called equipment. The knowledge of constructing, obtaining and using tools is technology. Varieties of implements and tools are required for carrying out the various garden operations like digging, breaking soil, clods, removal of weeds, levelling of ground, mowing lawns, planting of bulbs, layering and grafting, manuring etc. Some of the gardening hand tools are spades, garden forks, pitchfork, hoes, ploughs, shovels, pruners and ice choppers. Many hand tools have been replaced by electronic tools but gardening and landscaping hand tools are still preferred, because they are easier to use and cheaper. Garden tools can be made up of wood, metal or plastics. Landscaping and Gardening is one of the most rewarding and stress-relieving hobbies. The most common garden tool set includes: shovels, rakes, spades, diggers, trowels, etc. Gardening tools can be power or hand driven. There are some garden tools commonly used (Table 1).

1. Mughal garden

Mughal gardens are synonymous to formal style of gardening.

Broadly these gardens are categorized as Pleasure gardens and Tomb gardens.

Pleasure gardens are meant for kings and queens.

Tomb gardens are attached to tombs of kings and queens for giving peace to soul.

Gardens are symmetrically designed in rectangular or square plots.

The garden area is divided into four plots by water channels.

The four plots are planted with trees, shrubs, etc.

The four channels represent four rivers of life.

The running water provides coolness and freshness to the garden.

Reflection of sky and trees provide unique beauty to the eye.

The axis is straight and central and sometimes represented by tree line.

The water pool created in the centre with over flowing water serves as central specimen.

Fountains, cascades are linked to central pool to create scenic beauty

Definition: Climbers are woody or herbaceous plants which climb up the trees and other tall objects with the help of support of their special modified organs such as tendrils, roots, thorns, rootlets, hooks, etc.

Climbing plants are excellent examples of convergent evolution, i.e. having the same basic design that evolved repeatedly in unrelated groups. Majority of these plants are the dicotyledons but climbing plants have also evolved in monocotyledons. Examples are Vanilla orchid (Orchidaceae), Greenbriars, Smilax (Smilacaceae), Gloriosa (Colchicaceae), Semele androgyna (Ruscaceae), Dichelostemma volubile (Alliaceae), Asparagus (Asparagaceae), Bowiea volubilis (Hyacinthaceae), Chusquea (Poaceae).

Cactus: A succulent plant with a thick fleshy stem which typically bears spines, lacks leaves and has brilliantly coloured flowers.

Succulents: Plants that have some parts that are more than normally thickened and fleshy, usually to retain water in arid climates or soil conditions.

Together cactus and succulents are important group of ornamental plants which have the ability to store water and survive in hot and dry conditions.

Definition: It is an event at which flowers are displayed and judged for awards.

Flower shows help to spread the world about the joys of gardening and serve as forums for learning and discussing the latest horticultural and design trends. Such flower show offers a wide variety of helpful resources for those interested in learning more about growing flowers for exhibition, designing floral arrangements or exhibiting plants. In addition, many national level flower shows offers training opportunities for members who are interested in becoming certified flower show judges. A Preliminary spadework has to be done to make a show successful. Success depends upon the co-operation between the exhibitor and the members of the flower show committee.

Introduction

Anthurium is a perennial herbaceous plant of great beauty and grown either for its showy cut flower or for attractive foliage. They are valued for their colourful long lasting spathe and spadix. It is also known as Flamingo flower or Flamingo lily. In India the cut flowers of Anthurium andreanum are cultivated for considerable length of time. Its commercial cultivation is concentrated in North-eastern states and Kerala. The anthurium is getting increasing popularity in the Indian market and therefore, most of the locally produced anthurium is sold in the domestic market against reasonable prices. Its export possibility appears very promising as the flowers are already exported to the Middle East. The development of main flower distribution center in Dubai offers important possibilities for Indian floriculture.

Introduction

Gladiolus is an important commercial flower crop and is very popular as cut flower both in domestic and international market. It is a bulbous plant. Gladiolus was introduced into cultivation towards the end of the sixteenth century. The flowers are used in flower arrangement, in bouquets and for indoor decorations. In India gladiolus is commercially grown in West Bengal, Maharashtra, Uttar Pradesh, Uttarakhand, Punjab, Haryana, Sikkim, Jammu and Kashmir, Karnataka, Gujarat, Himachal Pradesh, Tamil Nadu, Madhya Pradesh, Delhi and Rajasthan.

Genetics

Gladiolus commonly called Sword Lily belongs to family Iridaceae and subfamily Ixioideae. There are about 260 species of gladiolus. It has the basic chromosome number n=15. Most members of genus are heteroploids having very small chromosomes ranging from 2n=30 to 120 (Diploid, triploid, tetraploid, pentaploid, hexaploid, octaploid and hyperaneauploid).

Introduction

Plants are grown both as shrub and climber. Flowers and flower buds are used for making garlands and Veni and for religious offerings. Jasmine oil extracted from the flower is highly valued as it is used in manufacturing perfumes, cosmetics, creams, hair oils, soaps and shampoos.

Flowers are used in jasmine tea or herbal or black tea. As a medicinal plant, jasmine has traditionally been considered an aphrodisiac and calmative. In India, it is grown in different states especially Tamil Nadu, Karnataka, Kerala, Uttar Pradesh, Bihar and West Bengal because their flower and floral buds are in great demand.

Genetics

The genus with basic chromosome number of n=13 generally consists of forms with 2n=26. However, natural occurrence of higher ploidy was also observed in J. sambac cv. Gundumalli (2n=39), cultivated variety of J. flexile (2n=52), J. primulinum (2n=39) and J. angustifolium (2n=52).

Introduction

Lily is one of the most important ornamental bulbous flowers. It is commercially cultivated for cut flower production. The flower stems of lily are long and it has longer vase life. Lilies are very useful flowering plants which can be planted in any location as they do well in the bed or border with other perennial.

Asiatic and oriental lilies are leading cut flower group and in the international market it is dominated by the Netherlands. Oriental and Asiatic hybrid lilies are compact, with plant height of 60 to 150 cm that bears many flowers.

The term ‘Horticulture’ is derived from two Latin words, Hortus meaning Garden and Cultura meaning Cultivation. In ancient days the gardens had protected enclosures with high walls or similar structures surrounding the houses. The enclosed places were used to grow fruits, vegetables, flowers and ornamental plants. Horticulture differs from agriculture and forestry in specializing the cultivation of garden crops. The garden crops include fruits, vegetables, flowers, ornamental trees, spices, plantations, medicinal and aromatic plants. Horticultural crops do not give food grains. The products of horticultural crops such as fruits and vegetables are highly perishable so that they are utilized in the fresh state. In general horticultural crops need more intensive cultivation (i.e. need more work) than the agricultural crops.

Special Features of Horticulture

As horticultural crops generally need intensive cultivation, they require a large input, capital, labour and technology per unit area of land.

Many cultural operations are specific to horticultural crops. The cultural operations such as propagation, fertilization, training, pruning, harvesting and marketing are skilled operations and these are specific to horticultural crops.

Mostly the horticultural products are utilized in the fresh state and are highly perishable.

Most of the horticultural crops are the rich sources of vitamins and minerals.

Gratification or aesthetic sense is an exclusive phenomenon for horticultural science.

Horticulture means the cultivation of garden plants. The garden plants are comprised of fruits, vegetables, ornamentals etc. The culture covers the operation from raising and planting of saplings to the ultimate use of the products and, as such, it is the most intensive of all the agricultural sciences. However, the concept of growing plants in garden or in an enclosure does not fit well in the changed perspective where large scale cultivation of fruits, vegetables and flowers extending over several square kilometers, in many a place nowadays, delimits the boundary of garden.

Importance of Horticulture

The importances of horticulture are established not only as a source of nutritious foods but also in many other ways which are narrated in the following points:

Social- Due to the long association, the fruits are seen to have a permanent seat in the social life of man. As a consequence, various fruits have acquired their place in art, music, literature, customs and habits of various nations of the world. The description of fruit as symbolic insertion in the poems and literatures, the use of whole fruit plant or part thereof in various social festive and public gathering, and conferring titles to individuals in the name of fruits or naming a region or whole district after the name of a fruit are nothing but an indication of their popularities and social position in various countries.

Nursery

Nursery is a place where seedling, saplings or any other planting materials are raised, propagated, multiplied and sold out for planting. The prerequisites of a successful and remunerative fruit production are the availability of true-to-type, healthy and good quality planting materials. Setting up of a fruit nursery is a long term venture and requires careful planning and expertise, because mistakes committed initially cannot be rectified easily and may adversely affect the return from the investment. Thus, one should pay due attention on every aspects when nursery is to be established.

The current status of advances in fruit breeding is through the development of different scientific approaches augmented by ever-increasing knowledge and application of genetics, statistics and biotechnology. These innovative approaches very specific for a species in most of the cases, are the major tools of the fruit breeders to tackle the different objectives of fruit improvement programme at present Fruit improvement is a very slow process due to the long generation cycle varying from species to species, thereby reducing the chances of exploiting genetic recombination. Besides this factor, most of the fruit species are either highly heterozygous or polyploidy in nature. Due to this reason the asexual propagation of fruit plants is a conventional means while wide segregation occurs upon sexual reproduction. Such expectation is not unlikely because the types selected as commercial varieties are definitely to be vigorous ones, and a positive correlation exists between vigour and heterozygosity.

This discussion on breeding of fruit plants involves different aspect of the species concerned is so essential as well as fundamental that discussion of them must procede any consideration of breeding methods themselves. The plant species are grouped into two-self-pollinated and cross-pollinated. These two groups have emerged on the basis of pollination mechanism which plays significant role in the method of breeding application. To emphasize the difference in the reproductive systems of these two groups one should know the details about floral biology, mechanism of pollination control, reproduction by asexual and sexual means and self and cross-pollinated plants.

Annuals Border

In this type of border annuals are planted according to their height to beauty of the garden. Annuals border are found two types.

• Single face border.
• Double face border.

Single face border- In this type dwarf plant is kept on front of beds, medium height annuals are planted in the centre while the taller annuals are planted in the back.

Double face border- In this type tall annuals are planted in the center and medium and dwarf annuals are planted in both sides of tall annuals so that full view can be seen from both side.

Proper handling, packaging, transportation and storage reduce the post harvest losses of fruits and vegetables. For every one percent reduction in loss will save 5 million tons of fruit and vegetable per year. Processing and preservation technology helps to save excess fruit and vegetable during the glut season (off season). The technology has become a necessity to improve the food safety and strengthen nation’s food security. The technology helps to boost export of agricultural commodities in the form of preserved and value added products e.g. mango, pineapple, citrus, grapes, tomatoes, peas, potato and cucumber being processed on a large scale.

Principles and Methods of Preservation of Fruits

Preservation: Preservation means just protect the foods against the spoilage, but scientifically it may be defined as a science which deals with the process for prevention of decay or spoilage of the food is called preservation. In other words, just controlling the physical, chemical or microbial changes in the foods is called preservation.

Jam: Jam is a product made by boiling fruit pulp with sufficient sugar to a reasonably thick consistency. Jam is mainly prepared by apple, pear, sapota, apricot, peach, papaya, karonda etc. It can be prepared from one kind of fruits or from two or more kind of fruits. In general jam contains 0.5-0.6% acid and invert sugar should not be more than 40%.

Introduction

The characteristic features of a city are the result of the combination of various factors like topography, climate, history, economy, culture, etc. since these characteristics vary; every town/city is unique and has certain distinctive characteristics. These urban characteristics are, however, never static. They change both over time and space.

With the development of the economy, other factors like population growth, urbanization and improved technology have a combined effect on urban settlements, which grow bigger and more complex. The study of the internal structure of cities by urban geographers is a study of the structural and demographical variations (i.e., variations in building size, shape, height, function and social status) of urban settlement.

Theories on the Internal Structure of Cities

The internal structure of cities has attracted many generalizations in the form of theories. These theories have attempted to explain the city structure by examining cities at any location in a country largely from sociological viewpoint. The different theories on the internal structure of cities are the Concentric Zone theory of Burgess, Sector Theory of Hoyt, the Multiple Nuclei Theory of Ullman, the Social Area Analysis of Murdie and the Exploitative Model of William Bunge.

Alfred Weber first introduced his famous theory of industrial location in 1909, in his book entitled, Uber den Standort der Industrien and its English translation was published in 1929 as The Location and Theory of Industries. His theory is known as ‘LeastCost Location Theory’ or ‘LeastCost Minimization Approach’. The basic objective of the Weber’s theory is to find out the minimum cost location of an industry.

2.1 INTRODUCTION

Vegetables are grown and consumed throughout the country either on small or commercial scale. Various terms have been used for vegetable gardening, based on the objectives for which they are grown and can be classified into various types depending on the acreage cultivated, method of cultivation and purpose of vegetable production. Based upon these facts, vegetable cultivation is divided into the following types of gardens:

Home or Kitchen Gardening: The purpose of this gardening is to supply the varieties of vegetables for family use.

Commercial Vegetable Gardening: This is the method of growing vegetables on large scale to earn profit and is further divided into seven types

14.1 INTRODUCTION

Drumstick is one of the most popular perennial tree vegetables in the south Indian households and known as miracle tree. This perennial vegetable survives for several years and goes on yielding vegetables without much care and attention, and is planted on the side of the kitchen garden without much interference with tillage operations of other annual crops. The fruits, leaves and flowers are used in culinary preparation. Immature fruits are cut into pieces and used in several culinary dishes. Fruits are rich in Vitamin C, carotene, Phosphorus and minerals like Mg, K, S, Cl etc. Tender leaves and flowers are comparable to that of Colocasia in vitamins and minerals. Drumstick leaves contain high amount of vitamin A (four times more than carrot), vitamin C (seven times more than orange), protein (5-10%), calcium (four times more than milk) and potassium (three times more than banana).The roots of the plant are used for seasoning pickles. Its roots are a good substitute for Horse Radish so called as Horse radish tree. It is highly valued for the distinct and appealing flavour for its tender fruits. They are rich source of protein, minerals and vitamins. Seeds contain an oil called ben or behen oil which has been much used for illumination, soap industry and highly priced for lubricating watches, computers, delicate machinery and so known as Ben oil tree. Seeds contain 38-40% of non-drying oil which is clear and odourless, that never becoming rancid. The oil contains high levels of unsaturated fatty acids, especially oleic acid up to 67.8%. It is edible and useful in the manufacture of perfumes and hair dressing. The press cake remaining after oil extraction is high in saponin, not edible, but utilized as manure. The oil cake is a water coagulant and used for purifying effluent water. It is used as organic substitute for water purifying chemicals such as aluminium sulphate. Wood yields blue dye and coarse fibre. The plant is used for treatment of rheumatism and as cardiac and circulating system stimulants. It has fragile and cory stem. The trunk is gaining importance as a raw material for paper making. The gum of stem has medicinal properties. The leaves are usually tri-pinnate with elliptic leaflets. Seeds are trigonous with wings on angles. Flowers are produced on current seasons growth on large and erect panicles or monocladial cymes. Flowers are yellowish creamy white and sweet smelling. It is a cross-pollinated crop. Pollinator is carpenter bees, bumble bee, honey bee and flee beetle. Flowering mostly varies from place to place and is greatly influenced by rain, temperature, humidity, wind, soil moisture and soil temperature etc. Peak period of flowering in central parts of India and Kerala is December-January while in southern part it is February-March and July-August with maximum flowering in February-March. Fruits take 60 days for horticultural maturity during rainy season while 30 days in summer.

Livestock plays a subsidiary role in the farm as far as food production is concerned. Their role in absorbing the huge quantities of crop residues, coarse grains, cereals by-products and farm left-over and returning valuable manure to the soil to sustain their fertility for generation is significant. Livestock in general and dairying in particular is emerging as a driving force in the growth of agricultural sector in India. Dairying is the backbone of the marginal farmers and landless labourers spread over numerous villages scattered throughout the country. It is primary source of income and employment for many of India’s poor. This sector can play an important role in determining future prospects for the employment generation and poverty alleviation in the country.

After the Independence of India, the occupational avenues have undergone a tremendous change. With the spread of education and other amenities of life the traditional occupational structure has considerably changed. The Gujjars who had been a nomadic tribe are extensively becoming sedentary. The Gujjars are one of the important pastoral communities of India. Different social scientists and anthropologists have documented the origin and social aspects of the present Gujjars, who lived a pastoral life. Gujjars have their own Gujri language, which they generally speak among themselves. But they correspond with other people in Urdu generally. The main source of income for Gujjars is dairying. Consumers also prefer milk sold by them, as the quality of milk is good. The role of Gujjars to the rural and urban economy cannot be undermined.

Though information on sociological and anthropological aspects of the pastoral communities has been generated in various studies elsewhere but socio-economic studies are scanty. No concerted efforts have so far been made to study the socio economic of Gujjars, particularly with reference to various important economic parameters like resource structure, family composition, education status, economic status.

The present chapter is an attempt to study the socio economic aspects of one of the well known pastoral communities- the Gujjars of the Jammu district.

Medziphema rural development block is known for producing sweetest pineapple in Nagaland. A few years earlier, farmers predominantly practised indigenous method of pineapple cultivation where productivity was less. Under horticulture technology mission, farmers have been trained to grow pineapple scientifically. Therefore, a study was conducted to know the scientific orientation of pineapple growing farmers in Medziphema rural development block of Nagaland. Sample pineapple growing farmers were selected as respondents from three purposively selected villages under Medziphema rural development block. Respondents were selected following random sampling procedure. A structured and pretested interview schedule was used for collection of primary data from the respondents. Data analysis was done using SAS software. Findings of the study revealed that, majority of the pineapple growing farmers possessed medium level of scientific orientation, followed by high and low level of scientific orientation. The variable ‘scientific orientation’ was significant and positively associated with the ‘entrepreneurial behaviour’ of the pineapple growers and it was found as an important predictor variable influencing the entrepreneurial behaviour of the pineapple growers. It was inferred from the study that off late, farmers are realising the importance and benefits of growing pineapple scientifically. Scientific orientation can promote the pineapple based entrepreneurial activities which can bring about the socio economic development of the rural people.

Traditionally, agriculture in India was practiced on a subsistence basis; the villages were self sufficient, people exchanged their goods, and services within the village on a barter basis. But, with the development of means of transport, storage facilities and other infrastructure, agriculture has become commercial in character. The hills of India produces a wide range of goods starting from temperate fruits like apple to subtropical fruits like guava and cash crops like saffron, kala zeera, buckwheat etc. that are demanded at every corner of the country and even the world. The hills in India lacks infrastructure because of which farmers are not able to fetch a better price for their produce.

Agriculture is the dominant activity in the hill economy, which confronts multiple risks and uncertainty. The low yield of food and cash crops, fodder, fuel and other minor forest produce and their stagnant growth affected the agrarian economy and in particular the household food security. The scattered land holdings, traditional mode of production, low use of modern inputs and lack of market incentives are the primary causes of the poor performance of agriculture in J&K. Increase in Seed Replacement Rate (SRR) of major crops, Popularization of hybrids, Soil and Water conservation measures, and Public-private partnership are important aspects need to be considered for agriculture development in hilly areas of J&K. Strengthening of markets, Innovative marketing techniques and On-line trading can help in a big way for solving the problems of marketing in such areas.

1.1. Definition

A tractor is a specific vehicle designed to deliver a high tractive torque at slow speeds, for the purposes of haulage or for pulling an agricultural implement or equipment or machinery. This vehicle is also used as a source of power for stand-alone agricultural machineries. The word tractor is taken from Latin being the agent noun of trahere “to pull”.

1.2. History of evolution

The first engine-powered farm tractors used steam and were introduced in 1868. These engines resembled small road locomotives. They were used for general road haulage and in particular for timber trade. The most popular steam tractor was the Garrett 4CD.

In 1887, gasoline-fuelled engines were tried as an alternative to steam engines. Later, Henry Ford produced his first experimental gasoline powered tractor in 1907, under the direction of his chief engineer Joseph Galamb. It was referred to as an “automobile plow”. While unpopular at first, these gasoline powered machines began to catch on. In the 1910, the size of the tractor was smaller than the earlier introductions and also became more affordable. In 1917, Henry Ford introduced the first mass-produced tractor. These were built in the U.S.A., Ireland, England and Russia. The unique feature of these tractor consisted of the strength of the engine holding the entire machine together. By 1920, tractors with a gasoline powered internal combustions engine had become a norm.

1.3. History in India

The level of mechanization in Agriculture was very low at the time of independence in 1947. But, the initial few five-year plans implemented by the Government of India gave an impetus to the improvement in the production and productivity of major crops including mechanization via joint ventures and tie-ups between local industrialists and international tractor manufacturers. It was three decades after independence that the domestic production of 4-wheel tractors grew slowly. In 1990, the tractor production was nearly 2,70,000 units per year and by the 2013, the volume approached to about 6,96,000 units per year. India has presently overtaken the United States as the world’s largest producer of four-wheel tractors with over 16 national and 4 multinational corporations engaged in its production. But still the Food and Agriculture Organization estimates that from out of the total agricultural area, less than 50% is under-mechanized land preparation. This indicates that potential for large tractorization still exists. Credit facilities for farmers have been improving steadily over the years. This is one of the prime drivers of the sale of tractor in India.

12.1. Instruments panel

12.1.1. Oil pressure gauge

Indicates oil pressure in Kgf/cm²

23.1. What?

Post harvest and agro-processing refers to activities carried out after harvesting a crop. These include milling, grading, processing and packing of the produce before it reaches the end users. This is also referred to as value addition, as it increases the marketable quality of the harvested produce.

23.2. Milling

It is the process of separating edible portion of the grain after removal of the husk or seed coat. This converts the products into a form that can be readily used for cooking, e.g. rice milling and dal milling.

23.3. Grading

Grading is the process of segregating the harvested produce based on the physical appearance including size and colour. Grading increases the market value of the crop.

1. SEED GERMINATION

The process whereby seeds sprout and begin to grow is known as germination.

Germination is the onset growth of a seed, often following a period of dormancy, in response to suitable environmental conditions. During germination (the growth and development process) of a seed, the water is absorbed through micropyle, and the formerly dormant embryo resumes growth and emerges from the seed.

1. DEFINITION

Seed village definition is to see that the aim right from the start is to make a holistic transformation in the village. Seed village concept is a “Win-Win model”, says Deepak Mullick, one of India’s foremost professionals in agribusiness. It is also known as “Compact area approach”. Seed village area should be suitable for crop or varieties. Seed in compact area, whole village should be involved. The whole farmers in the village cultivate same crop, same variety and follow same cultivation practices.

1. LAND REQUIREMENTS

Land should be fertile with selected irrigation and good drainage facilities. It should be free from volunteer plants. The field should not have been grown with the same crop in the previous season. If grown, it should be the production of same class of seed for the same variety.

1. TECHNIQUES OF HYBRID SEED PRODUCTION

1.1. Field crops

Table 1: Techniques of hybrid seed production in field crops

1. INTRODUCTION

Green Revolution Technologies (GRT) such as greater use of synthetic agrochemicals like fertilizers and pesticides, adoption of nutrient responsive high yielding varieties, greater exploitation of irrigation potentials etc. have boosted the production output in most cases. However, continuous use of these high energy inputs indiscriminately now leads to decline in production and productivity of various crops as well as deterioration of soil health and environment. The most unfortunate impacts of GRT on Indian Agriculture are imbalance in production, dependency on synthetic chemical fertilizers, increase in secondary and micronutrient deficiencies, increase in pesticide use, unscientific water management and distribution, reduction in productivity, reduction in quality of the produce, extinction of gene pool, environmental pollution and imbalance in social and economic status.

Moreover, today the rural economy is now facing a challenge of over dependence on outside inputs and day-by-day increase in price of these inputs. Further, Indian Agriculture will face the market competition due to globalization of trade as per World Trade Organization (WTO). Thus, apart from quantity, quality will be the important factor. Such varieties of concern and problems of modern Indian Agriculture gave birth to various new concepts of farming such as organic farming, natural farming, biodynamic agriculture, do-nothing agriculture, eco-farming, etc. Therefore, for sustaining the productivity of the crop, maintaining the soil health and healthy ecosystem, there is a need for adoption of an alternative farming system, may be the organic farming.

Organic farming is not new to Indian farming community. Several forms of organic farming are being successfully practiced in diverse climate, particularly in rainfed, tribal, mountain hills and resource poor areas of the country. It safeguards/improves quality of resources and environment. It is labour intensive and provides an opportunity to increase rural employment.

For a product to be called and labelled “organic”, it should have been produced from start (seed) to end (the produces, the consumer is buying) in an organic way. International Federation of Organic Movement (IFOAM) has clearly laid down the condition that in order to get organic certification to the produces, the seed used for sowing should also have been produced organically. To enter into organic agriculture, timely research has been warranted to study the strategies and efficacies of organic seed production to fulfill the global organic seed demand.

Organic seed production system involves use of organic seed quality enhancement treatments, integrated organic nutrient management practices viz., organic manures, green manures and biofertilizers etc., and integrated organic plant protection viz., agronomic practices, crop rotation, growing border/trap crops and use of botanicals, biopesticides and biocontrol agents apart from encouraging natural parasites, predators and parasitoids etc.

2. METHODS OF HARVEST

The seed can be harvested either manually or mechanically. In mechanical harvesting, single harvest is possible, but care should be taken to avoid mechanical injury. In manual harvesting, crops can be harvested either as single harvest or as periodical harvest. The crops having continuous flowering habit are to be harvested in different harvests/ pickings.

2.1. Manual harvesting

Harvesting any crop can be done manually. Manual harvesting is done by the hand of harvest worker. Multipicking in pulses and vegetables is done by manual methods.

1. SEED LOT

A specified quantity of seed which is physically identifiable to the types of which certificates may be issued.

2. SAMPLING

A sample is obtained from the seed lot by taking small portions at random from different position of the lot and combining them. It is a representative sample of a seed lot.

The objective of sampling is to obtain a representative sample of a size suitable for test. When the sample originates from seed lot, it is expected that the results reflect the average quality of the seed lot.

1. GERMINATION TEST PROCEDURES

Although several methods are available for germination testing it is suggested that use one of the two major methods described here because these are adaptable to most environments and in general give uniform results Select 400 seeds randomly and used for germination in 4 replications.

1.1. Top of Paper (TP)

Seeds are placed on one or more layers of moist filter paper or blotter paper in petriplates These petriplates are covered with lid and placed inside the gemination cabinet This is suitable for those seeds which required light Cut the paper to the size and shape of the dishes (Fig. 1).

Place a layer of paper in each dish If the paper is too thin use a double layer Label the top and bottom of each dish with the accession number number of the replicates and date of the test Moisten the paper with water (Fig. 2)

1. DEFINITION

Sum of those properties of seed, which determine the potential level of activity and performance of the seed or seed lot during germination and seedling emergence. i.e., rapid and uniform production of healthy seedling and stand establishment under a wide range of field conditions is considered as seed vigour.

In a vigour test, the seed is introduced to a stressful environment unfavorable to seedling development. This environment can be cool, cold or warm, or a combination of either high humidity and high temperatures, or heavy moisture at low temperatures. A vigor test cannot replace a germination test, but rather supplements it with more information about seed quality.

Weight loss: For grains or grain legumes in the tropics, a weight loss in the range of 10-30 per cent might be expected over a full storage season.

Loss in quality/market value: Infested seed is contaminated with insect debris and has increased dust content. Seeds are holed and often discoloured, which fetch low price.

Promotion of mould development: In humid conditions, without adequate ventilation, mould development and caking can spread rapidly, causing severe losses.

Reduced germination in seed material: Damage to the embryo of the seed will usually prevent germination. Some storage pests prefer to attack the embryo.

Mycotoxins are the secondary metabolites produced by moulds, which grow on food and feedstuffs causing pathological or physiological changes to humans and animals. They are toxic to vertebrates in low concentrations. Symptoms depend on the amount of toxin in the feed, the period for which the infested feed is ingested, the nutritional status of the feed and the susceptibility of the animal species. Toxic effects of chronic consumption of mycotoxins in human are carcinogenicity, hepatotoxicity, oestrogenicity, genotoxicity, nephrotoxicity, immunosuppression, reproductive disorders and dermal irritation (Anfossi et al., 2010). The most extensively studied mycotoxins viz., Aflatoxins, ochratoxins, deoxynivalenol (DON, vomitoxin), T-2 toxin, zearalenone, fumoninsins, mycophenolic acid, cyclopiazonic acid and ergot toxins are produced by the moulds Aspergillus, Fusarium, Pennicillium and Claviceps (Iqbal et al., 2015).

Mycotoxins are toxic secondary metabolites produced by different types of moulds which are present in soil, plant and feed ingredients. Ingestion of toxins will result in reduced growth and production performance due to reduced nutrient utilization, illness or death of animals. Analysing the presence of mycotoxin and its concentration in grain and feeds is necessary to eliminate the adverse health effects of mycotoxins in animals. Estimation of mycotoxin in feed ingredients is a challenging task because the concentration of toxin is at µg/kg or parts-per billion levels. At the same time, analysing inappropriate samples is a waste of resources. Mycotoxins are not evenly distributed in feeds or grains. If the specimen collected for analysis includes contaminated grain, the mycotoxin will be detected. If not, the mycotoxin will not be detected.

Sample collection for mycotoxin analysis

The objective of sample collection is to collect the specimen samples from as many parts of the feed lot as possible. The size of the collected specimen depends on the size of the load received. Sample collecting probes can be used to collect the samples from bags.

Abstract

Yak milk is unique as it is rich source of nutrients and is the main source of milk derived nutrition in hilly areas, where the availability of bovine milk is very limited. It is considered as a concentrated source of nutrients with a total solids (TS) content of approximately 16.9-17.7%. The nutritional profile and physico-chemical properties of yak milk is very different from that of conventional source of milk. Though, the production of yak milk and milk products is not organized and is limited to the custom of high altitude regions only. However, yak milk and milk products like churpi, kurut, orom, paneer, churkam, serkam, butter etc. are gaining attention of consumers due to their significant nutritional and therapeutic value. Owing to this, it has further increased the interest of researchers for the development of new array of yak milk based organic dairy products. Therefore, with growing demand of natural functional foods, yak milk could be valuable product to meet the demand of functional foods.

The aim of this chapter is to highlight the nutritional profile of yak milk including, amino acid profile, lipid profile and mineral composition. Yak milk based regional products are also discussed in order to provide some basic information regarding the value addition of yak milk.

Abstract

Now-a-days non bovine milk become an area of interest for their potential to provide nutrients along with beneficial health effects. Deer belongs to cervidae family, is one of the source of non bovine milk. Two thousand years ago, the people of Soviet Union along the borders of Russia, Mongolia, and China used to consume deer milk and milk product. Deer milk is a plentiful source of milk solids. The proteins of deer milk is more digestible than bovine milk owing to their unique profile and characteristics. Deer milk being rich in highly digestible protein offers beneficial health effect through bioactive peptide production. The distinctive physico-chemical properties being quite similar to sheep milk shows the milk product manufacturers a scope to use deer milk for production of various dairy products. Although there is immense opportunity to use deer milk for development of diversified functional products, further research work is needed to be carry out to find out the type of biopeptides produced during protein hydrolysis, role of fatty acids, effect of different unit processing on its constituents etc. This chapter delineates the nutritional profile and physico-chemical properties of deer milk along with the significance of it in terms of its therapeutic roles and potential to be used for product development.