eChapters

The prime object of plant breeder is to develop high yielding variety with superior characteristics. Selection is based on the phenotypes of the plants. Consequently the effectiveness of selection primarily depends on the degree to which the phenotype of plants reflects their genotype. These are all self fertilizing species. In these species development of seed take place by self fertilization. Hence self pollinated species are also known as autogamous species. Various plant characters such as homogamy, cleistogamy, chasmogamy, bisexuality etc. promotes self pollination. The self pollinated crops with their description are given in Table 9.1. The breeding methods used in self and often-self pollinated crops are discussed below:

Plant Introduction

Plant introduction consists of taking a genotype or a group of genotypes of plants into a new area or region or environment, where they have not being grown earlier. It is very simplest and fastest method of developing new variety. It is of two types:

The genetic organization of cross pollinated crops are different from that of self pollinated crops, because of differences in the reproductive system. Open pollinated populations are heterozygous with free inter mating individuals, heterozygous at most of the loci. Heterozygosity is an essential feature of commercial varieties of out breeders. It is maintained during breeding or is restored at the end. Population improvement involves selection, generation after generation, with recombination of selected individuals. Its aim to increase the frequency of favorable alleles in the population. The improved forms may be used for commercial cultivation or as a base germplasm for the derivation of inbred lines. The list of cross pollinated plants is presented in Table 10.1. The factors that promote the cross pollination are dicliny, dichogamy, herkogamy, self-incompatibility and male sterility. The breeding methods which are commonly used in cross-pollinated crops are population improvement, hybrid and synthetic varieties.

Population Improvement

In cross pollinated crops heterozygosity must be restored in the end product of any breeding programme. It is classified into the following types:

1. Bread Wheat (Triticum aestivum)

Wheat has been traditionally grouped into the genera Triticum in the tribe Tritiaceae of the family Poaceae. Bread wheat, 2n=6x=42 is a hexaploid consisting of three distinct genomic complementary, namely, A, B and D, with the genome structure AABBDD. In the past there were 4 species, viz. Triticum aestivum, T. durum, T. dicoccum and T. sphaerococcum, under cultivation in India. T. sphaerococcum has now practically gone out of cultivation because of its low productivity and high susceptibility to diseases. The major wheat producing countries are China, India, USA, the Russian Federation, and Australia. These five countries together contribute more than half of the global wheat production. In India, Uttar Pradesh has registered the highest production followed by Punjab, Madhya Pradesh, Haryana, Rajasthan and Bihar. These top six states together contributed around 90 per cent of the total wheat production in the country

Floral Biology

The inflorescence of wheat is known as spikelets. Spikelets are alternately arranged on the rachis; each spikelet’s has a small joint axis which bear two to nine flower known as florets. Close to the base of rachilla are two empty boat shaped bracts known as glumes. Above these inserted alternately on opposite side of the rachilla known as lemma. Opposite it’s a thin membrane bracts known as palea enclosed within the lemma and palea are a single pistil and three steamens. The pistil consists of an ovary bearing two short styles each carrying a feathery stigma. At the base of the ovary are two membranous scales known as lodicules. Each stamen consists of a thread like filament carrying a pollen containing anther.

The commercial exploitation of heterosis started only after the rediscovery of Mendel’s law of inheritance and consequent understanding of the theoretical basis of hybrid vigour. Heterosis is considered as a major revolution in classical plant breeding era. Utilization of heterosis has substantial influence in genetics to provide hybrid vigour, consequently high yielding hybrids in different crops and plants. Yield increase from heterotic hybrids due to the expression of heterosis is up to 30% superior to conventional varieties. The term heterosis was first used by Shull (1914) and represents the increase or decrease in fitness and vigour of the F₁ hybrid over the mean or mid parent values, produced by crossing two genetically different individuals for one or more traits. Generally, positive heterosis is desirable but in some cases like maturity duration and presence of toxic substances, negative heterosis is condiderable as desirable. Heterosis can be estimated in three different ways. When the heterosis is estimated over mid parent, it is called as relative heterosis or mid parent heterosis. Estimation of heterosis over better parent out of the two parents involved in the cross is referred as “Heterobeltiosis”, the term which was coined by Fonseca and Patterson (1968). “Standard Heterosis”, often called as useful heterosis which was coined by Meredith and Bridge (1972) and denotes the superiority of F₁ over the standard commercial check.

Hybrids are produced by crossing two genetically diverse parents variety. Hybrid vigour is at its maximum in the F₁ generation and hence highest emphasis is placed on the F₁ hybrids. Hybrid varieties leads to maximum exploition of heterosis as compared to any other varieties. Beal in 1880 recommended the use of F₁ varietal crosses of maize for commercial cultivation.

Reproduction that does not involve the union of male and female gametes is known as asexual reproduction. Reproduction in which sexual organs or related structures take part but fertilization does not occur, or crops which are propagated asexually or by vegetative means are known as asexually propagated crops. Most of the fruit plants are propagated asexually which consist of large number of clones. Example: sugarcane, potato, sweet potato, banana, mango, citrus, pears, peaches, litchi, crops that propagates by asexual means. The procedure of selection used for asexually propagated crops is known as clonal selection, since the selected plants are used to produce new clones or superior clones can be isolated from local variety, introduced variety or inter crossed population.

Mutagenesis is the process whereby sudden heritable changes occur in the genetic information of an organism not caused by genetic segregation or genetic recombination, but induced by chemical, physical or biological agents.

Mutations were first identified by Hugo de Vries in the late nineteenth century, while experimenting on the ‘rediscovery’ of Mendel’s laws of inheritance. He coined the term ‘mutation’. Radiation-induced mutations as a tool for generating novel genetic variability in plants, advanced as a field after the discovery of the mutagenic action of X-rays demonstrated in maize, barley and wheat by Stadler. The discovery of X-rays by Rontgen in 1895 led to the application of X-rays for inducing mutations in fruit fly by Muller (1927). Mutation is of two types

Polyploidy, the condition in which a normal diploid cell or organism acquires one or more additional sets of chromosomes. In other words, the polyploid cell or organism has three or more times the haploid chromosome number. Polyploidy arises as the result of total nondisjunction of chromosomes during mitosis or meiosis. The somatic chromosome number of any species, whether diploid or polyploidy is designated as 2n. The somatic cells of plants are diploid that they posses two complete set of chromosomes, one received from seed parent and another from pollen parent. The gametic chromosome number is said to be haploid and denoted by n. Haploid is defined as cell with gametic chromosome number. While monoploid has the basic chromosome number and represented by x.

Classification of Polyploidy

Polyploids are classified in to two groups, euploidy and aneuploidy. Euploidy have chromosome number which is an exact multiple of basic number. Euploidy includes monoploids, diploids and polyploids. In aneuplod individual with other than exact multiple of basic chromosome number or change in chromosome number which posses one or few chromosomes of the genome.

Abiotic stresses include salinity, drought, flood, extremes in temperature, heavy metals, radiation etc. They are the foremost factors that causes the loss of major crop plants worldwide. This situation is going to be more rigorous due to increasing desertification of world’s terrestrial area, increasing salinization of soil and water, shortage of water resources and environmental pollution.

The inadequacy of water availability, including precipitation and soil moisture storage capacity, in quantity and distribution during the life cycle of a crop to restrict the expression of its full genetic yield potential”. Generally drought stress occurs when the available water in the soil is reduced and atmospheric conditions cause continuous loss of water by transpiration or evaporation. Drought stress tolerance is seen in almost all plants but its extent varies from species to species and even within species.

The disease , referred as the disorder of crop plants caused by fungi, mycoplasma, bacteria and viruses. Plant resistance is one of the most effective and ideal approach to combat diseases and insect-pest. Resistance is the capacity of plants to resist, withstand and overcome the attack of pathotypes.

Mechanism of Disease Resistance

Different mechanism of disease resistance are as under:

1. Disease escape

The ability of susceptible host plants to avoid attack of disease due to environmental factors like early maturing varieties, shift in the date of planting, change the field, balanced application of NPK etc. Example., early maturing varieties of groundnut and potato may escape from ‘Tikka’ and ‘Late blight’ diseases respectively.

2. Disease tolerance

The ability of the plants to tolerate the attack of the pathogen without loss or little loss in the yield. This endurance is brought about by the influence of external characters. Generally, tolerance is difficult to measure since it is confounded with partial resistance and disease escape. Disease tolerance is of three types:

Crop breeders are continuously engaged in the improvement and development of crop varieties, in search of a genotype which will prove superior to the existence cultivars. A strain is duly released by appropriate duly empowered legal organization. Only when it is officially released, it is called variety, Before release, it is said to be strain or line. The release of new crop varieties consists of the following major steps:

1. Development of new strains

The new strains are developed by ICAR Crop Research Institutes and State Agricultural Universities for specific purposes. Various breeding methods are used for development of new strains. Some varieties are developed by selection without hybridization such as pure-line variety, mass selected variety and clonal variety. Development of some varieties involves hybridization and selection. This includes varieties that are developed by pedigree, bulk and backcross methods including multiline cultivars and population improvement methods.

2. Evaluation of performance

This trial is conducted at the research station, where new strains has breed. The object is to make sure that new strains are better in performance than the existence variety, so that it can be promoted to the trials where new strains has to be compete with other strains, developed by other scientists/researchers.

The prime objective of any plant breeder is to develop high yielding varieties and make the quantity of quality seed of those varieties to farmers for commercial cultivation to realize the benefits of superior varieties. This necessitates, the production of seed of improved varieties in large scale in order to make them available to farmers without losing their genetic purity. Seed production is a continuous process. The seed of improved varieties are produced in several stages, each class producing a special class of seed. The various classes of improved seeds are recognized in order to facilitate seed production and to ensure continuous supply of quality seed. A seed production programme for the production of quality seed has different classes of seeds viz; nucleus seed, breeder seed, foundation seed, registered seed and certified seed. The Association of Official Seed Certifying Agencies (AOSCA) has defined these seed classes as follows:

1. Nucleus Seed

Basic or nucleus seed is the original seed of a released and notified variety. Nucleus seed is multiplied by single plant progeny system, using the concept of maintenance breeding, where purity of the original parental stock is maintained. It is available in very limited quantities and taken from the individual plant of a variety for purification. It is directly under the controlled of concerned crop breeder. This seed has hundred percent genetic and physical purity. Breeder seed is multiplied out of this material and about 500-1000 plants are kept for continued multiplication of nucleus seed.There is no need of any type of tag on nucleus seed but concerned breeder issue a certificate for purity.

The term ideotype was proposed by Donald in 1968. Ideotype is a biological model which is expected to perform in a predicted manner in a defined environment. A crop ideotype is a plant model that is expected to perform better in a particular environment. The concept of ideotype changes from crop to crop, climate to climate and the concepts and policies of the community concerned. Ideotype breeding is the development of a plant type, expected more quantity of grains, with ideal character. Plant characters are selected from an agronomic point of view.

Tissue culture is a technique used to culture cells, tissues, organs or whole plant under controlled environmental conditions that in vitro condition is known as plant tissue culture. Plant tissue culture exploits the totipotency nature of plant cells, ability to develop in to complete plantlet.

Advances in molecular biology have sharpened the tools of the breeders, and brighten the prospects of confidence to serve the humanity. The application of biotechnology to field crop has already led to the field testing of genetically modified crop plants. Genetically engineered Rice, Maize, Soybean, Cotton, Oilseeds like Rape seed, Sugar Beet and Alfalfa cultivars are expected to be commercialized in the late of 20^th century. Genes from varied organisms may be expected to boost the performance of crops especially with regard to their resistance to biotic and abiotic stresses

Genetic engineering involves isolation of DNA fragments within a cell recombining them outside. The basic technique is quite simple. Two DNA molecules are isolated and cut into fragments by one or more specialized enzymes, the fragments joined together in a desired combination, then restored to a cell from replication and reproduction. This method also referred to as recombinant DNA technology. Genetic engineering developed in the mid 1970 when it becomes possible to cut DNA and to transfer particular pieces of DNA containing specific bits of information, from one type of organism into other.

Molecular markers, including DNA based genetic markers have found their applications in almost all areas of biology, more so in evolutionary biology, genetics and breeding in order to identify a particular sequence of DNA in a pool of unknown DNA. For many applications, DNA markers are preferred over other molecular markers since DNA is stable within an organism over time and among stages of development whereas other molecules are dynamic. A molecular marker is a DNA sequence that is readily detected and whose inheritance can be easily monitored. The uses of molecular markers are based on the naturally occurring DNA polymorphism. Most commonly used molecular markers in biological science include:

1. Restriction Fragment Length Polymorphism (RFLP)

RFLP is the first molecular marker technique which was invented by Botstein et al. (1980). The technique is based on restriction fragment length polymorphism; a molecular marker based on the differential hybridization of cloned DNA to DNA fragments in a sample of restriction enzyme digested DNAs; the marker is specific to a single clone/restriction enzyme combination. It consists of the following steps:

Marker Assisted Selection (MAS)

Marker Assisted Selection [MAS] is defining as the indirect selection for a desired plant phenotype based on the banding pattern of linked molecular (DNA) markers. It is based to infer the presence of a gene from the presence of a marker which is tightly linked to the gene of interest and high heritability of the gene of interest. Marker assisted selection (MAS) is also known by other names as marker aided selection and marker assisted breeding (MAB).

Intellectual Property: Intellectual property is an intangible creation of the human mind, usually expressed or translated into a tangible form that is assigned certain rights of property. It includes, inventions, trademarks, industrial design and geographical indications.

Intellectual Property Rights: Intellectual property rights (IPR) are the rights given to people over the creation of their minds. They usually give the creator an exclusive right over the use of his/her creations for a certain period of time. It includes, creations of the mind: inventions, literary and artistic works, and symbols, names, images, and designs used in commerce.

Biostatistics are the development and application of statistical methods to a wide range of topics in biology. It encompasses the design of biological experiments, the collection and analysis of data from those experiments and the interpretation of the results.

Quantitative traits are polygenic meaning they are controlled by many genes and gene interactions. Examples: height, weight, length etc.

Qualitative character

Qualitative traits are under the controlled of one or few genes, also called oligogeneic traits. For example, black or red coat color, horned or polled, coat color dilution, leaf color are all qualitative traits.

A. Multiple Choice Questions

1. While studying the history of domestication of various cultivated plants were recognized earlier:
   1. Centers of origin
   2. Centers of domestication
   3. Centres of hybrid
   4. Centres of variation
2. The quickest method of plant breeding is:
   1. Mutation breeding
   2. Hybridization
   3. Selection
   4. Introduction

1. Fruit : Types and their Classification

Fruit:The botanical definition of fruit is a seed-bearing part of a flowering plant or tree that can be eaten as food

or

Fruits are matured ovaries plus any associated flower parts and contain the seeds of the plant. The ovary may be subdivided into two or more carpels (then termed compound ovary) each bearing one to many ovules. Individual carpels develop into sections of a whole fruit, as with citrus where each familiar segment of the fruit represents one matured carpel. If the ovary is not subdivided, then it is termed simple. The ovules will mature into seeds if fertilized. Fruit has three parts.

Major field operations for horticultural crops viz., fruit nursery/seedling preparation, post hole digging for planting, intercultural operation, aeration, training and pruning, irrigation, plant protection, harvesting, handling, packaging transport are completed through field tools and implements. The cultivation of horticultural crops is predominantly dependent upon human labour, since commercial cultivation is only on a limited scale. So animal/power tiller or tractor-drawn mould board ploughs, disc ploughs, harrows, cultivators and rotavators are available for land preparation and development of new orchards. The fruit plants are generally perennial plants. So different types of sprayers and dusters are available from manually to power operated such as knapsack sprayers foot operated sprayers, power operated mist blowers and dusters or plant protection equipments used for application of insecticides, pesticides and herbicides in the fruit orchards. Some of important implements and sprayers are enlisted below

Soil

Soil is the upper most crust of earth surface which supports plant growth. It is defined as a three phase system in which plants grow. These phases are solid, liquid, and gas are essential. Solid part is frame which provides space for other two. It consists of minerals, clay minerals and organic matter. The soil is also a living system with millions of microbes that breakdown organic matter. The microbes are very essential and survive only when soil is well aerated and rich in organic matter and devoid of waterlogged conditions. Texture of soil depends on the size of solid particles and classified as gravel, coarse and fine sand, silt and clay. Soils are classified according to the relative distribution of these particles. Likewise, arrangement of these particles is referred as structure. Generally loamy soils and crumb structure are most growing preferred for fruit crops. According to level of organic matter, soils are classified as mineral soil or organic soil and soil having more than 20% organic matter is organic soil like peat and muck etc. Minerals and salts lend chemical properties to the soil like pH, alkalinity, sodicity, salinity and cation exchange capacity which influences the availability of nutrients in soil. Therefore, for making choice for soil, soil analysis in terms of following criteria isessential to decide on land capability. Maximum numbers of fruit orchards in India are depleted from micro and macro plant nutrients which interrupted the growth and development of the fruit plants and their quality. Therefore, like growers are not attain profit desired. To obtain marketable fruits, nutrients managements are highly beneficial to the fruit growers rainfed areas. Analysis of soil is useful to determine the level of the elements available in the orchards to get maximum yield.

Minor fruit crops are considered important for their food, fibre, fodder, oil or medicinal properties, but have been reduced in value over time owing to particular supply and use constraints. These can include poor shelf life, unrecognized nutritional value, poor consumer awareness and reputational problems food or “poor people’s food”. The main products consumed by people are fruit cordial, jam, fruit drinks, chutney, candy, pickle and squash concentrate crop species. The entire country is mainly depend on handful of crop species neglecting large number of vegetables, fruits and other crop species with high nutritional and medicinal values which were grown traditionally in the past, resulting these valuable crop species are critically facing the state of speedy disappearing.

The plan reviewing the arrangement of fruit plants in an orchard is known as the orchard layout. Although several systems of planting are followed to increase the production of orchard, selection of root stocks, soil, system of training pruning and cultivars are very important factor influencing designing of layout. However, improper system results in overlapping of plant parts, competition for water, light, nutrient and unequal distribution of water etc., which ultimately results in poor performance or fruit orchard.

Layout plan

The marking of position of the plant in the field is referred as layout. The layout plan of the orchard should be prepared carefully, preferably in consultation with horticultural experts or fruit scientists. The orchard layout plan includes the system of planning provision for orchard paths, roads, water channels and farm building. A sketch of the proposed orchard should be prepared before the actual planting is taken up.

Plant Propagation

Plant propagation involves the formation and development of new individuals, which are used in establishment of new plantings. It is simply the reproduction or multiplication of a plant from a source that is often referred to as a mother plant. In general, two methods are employed: 1) sexual and 2) asexual. Sexual propagation is multiplication of plants from seed and asexual or vegetative propagation involves starting a new plant from some vegetative part of a plant. Propagation by seed results in seedling variability. It is an extreme disadvantage for a nursery operator trying to produce a uniform crop containing chosen desirable characteristics. Seed propagation is not practiced in fruit nursery as plants raised by this method fail to bear true to type fruits.

Germination of seed

The activation of the metabolic machinery of the embryo leading to the emergence of a new seeding plant is known as germination. Germination is essentially a quickening of the growth of the embryo. As germination proceeds, the growing points of the radical and plumule divide rather rapidly Usually the radical emerges from the seed coat first, proceeds downward, and develops into the root system, the plumule proceeds upward and develops into the shoot system. Germination is entirely a food utilization process. Processes going on in seed during germination are: 1) Absorption of water; 2) Secretion of enzymes and hormones; 3) Hydrolysis of stored food into soluble form; and 4) Translocation of soluble foods and hormones to the growing points. These processes are either wholly or in part influenced by the food reserves, hormone supply, water supply, oxygen supply and temperature level.

Selection of orchard soil in rainfed areas

A good or adequate soil for orchard production is to say that a given plot or area of land must possess the following qualities.

1. A deep and well aerated soil with good drainage.
2. Adequate nutrients for optimum tree growth and high yields.
3. Good Water holding capacity - the ability to store and feed the fruit tree with an abundant supply of water.

It is a scientific technique which provides maximum outputs of various inputs consistently without any loss of fertilizers and manure, plant, plant protection chemicals, produce etc. Therefore, one should understand the management of these qualities of both resource and output.

Importance of training and pruning

1. To control the habit of vegetative growth and regular bearing.
2. Remove all limbs and dead branches.
3. To improve flowering, fruiting and fruit quality
4. Remove all broken shoots, diseased, or pest infection branches from all trees and shrubs.
5. It is usually best to prune temperate fruits and shrubs during early spring before full leaf.
6. Maintain balance between shoots and roots at planting and nutrients uptake
7. Provide the basic tree form and to aid the development of a strong tree framework by encouraging strong wide crotch angles
8. Stimulate shoot growth near a cut.
9. Permit proper light distribution and penetration to the tree canopy.
10. Increase insect and disease control by allowing for better spray penetration.
11. Facilitate harvesting.
12. Achieve orchard uniformity.
13. Produce the proper amount of well distributed fruiting wood.
14. Encourage a structurally sound tree by removing branches with weak narrow crotch angles or those with diseased, damaged, or unproductive wood. Invigorate and renew the bearing area of older trees.

Indian Institute of Horticultural Research (IIHR), Bangalore

Indian Institute of Vegetable Research (IIVR), Varanasi

Indian Institute of Spices Research (IISR), Calicut, Kerala

Central Institute of sub-tropical Horticulture (CISH), Lucknow

Central Institute of Temperate Horticulture (CITH), Srinagar

Central Potato Research Institute (CPRI), Kufri, Shimla

Central Tuber Crops Research Institute (CTCRI), Thiruvananthapuram, Kerala

Central Plantation Crops Research Institute (CPCRI) Kasargod, Kerala

Central Institute of Arid Horticulture (CIAH), Bikaner, Rajasthan

Central Institute of Post Harvest Engineering and Technology (CIPHET), Ferozepur, Punjab

Introduction

The health and wellness continue to drive growth in the global food industry as the consumers are constantly looking for the foods, beverages and other dietary solutions that will help them more aggressively to meet their own unique nutrition and personal health goals. Worldwide countries are going through a nutritional transition and are now affected by double burden of problems like nutritional and food security. The common alarming problems are under nutrition and specific nutrient deficiencies simultaneously coupled with imbalanced diets and chronic diseases. The problem of chronic diseases, non-communicable diseases (cardiovascular diseases, respiratory diseases, diabetes, obesity, cancer etc.) and malnutrition is more serious in the developing countries. The lack of access to health services, sufficient income, healthy and nutritious foods characterize majority of poor people in developing countries. So, food is not only the solution but also viewed as a product to enhance health and wellbeing, and it encourages the producers by supplying new goods that meet these needs. From the past decade, there has been growing consumer awareness regarding health, nutrition and the food safety which are often triggered by specific food incidents, especially in the developed countries and high-income groups in such countries. In the food industry there have been two broad trends which are hazards in the food chain and nutritional profile of the food. There has been recognition that hazards and contaminants can enter the food chain and can cause sickness, death and diseases, and so governments, often to deal with consumer and industry concerns, establish regulations and standards on food hazards including standards on pesticides, antibiotics, microbiological hazards and other chemical and physical contaminants. On the other hand, there is also a growing awareness of the health-enhancing properties for prevention and treatment of health concerns beyond the basic nutritional component of many foods.

Introduction

Society is dynamic. The requirement of society varies in course of time. During the life process human being faces lots of health hazards which are mostly due to intake of various foods. So people become cautious about the intake of food and think about the quality of foods which can protect the health of human being. In ancient times people made medicines from plant extracts to protect their health. In 1989, Dr. Stephen coined the term “Nutraceuticals” which is combination of nutrition and pharmaceutical. Nutrition is required for health and pharmaceuticals provide remedy for sickness. So it is a preventive approach. Nowadays, the definition of nutraceuticals has been expanded to include vitamins, minerals, herbs and other botanicals, amino acids, and dietary substance for human use as a supplement diet (Stauffer, 1999).

Nutraceuticals are dietary supplements made only from whole foods to augment health. Currently over 470 nutraceutical and functional food products are available with documented health benefits (Brower, 1999). The patients are much aware about the side effects of chemical agents in short and long term therapy. So to avoid medicine used for small diseases, new therapies came into trend with the help of nutritional approaches i.e. “Nutraceuticals”. The use of nutraceuticals becomes easier than pharmaceuticals since nutraceuticals does not require any animal verification for its use in human. Nutraceuticals,

Functional foods and Dietary Supplements are most important concept in food science. They have distinction amongst themselves.

Introduction

Our traditional knowledge of medicine has been one of the strongest areas of research because of our rich heritage in herbal plants & great biodiversity in our fauna & flora. Consumption of plant foods and the structurally diverse natural products provided by them have long been associated with health-protective and therapeutic effects. Natural products in plant foods have been shown to have pleiotropic therapeutic and chemopreventive properties. These bioactive products are known to potentiate the efficacy of other drugs and have synergistic effects too. Most of the prescription drugs discovered so far is from plant sources and 75% drugs had been claimed in folklore claims and traditional medicinal system (Reynold, 1991; Benowitz, 1996). The traditional Indian medicinal system utilizes multicomponent formulations of plant extracts which may either act synergistically or avoid many side effects and might have added up trace element through combination of different plant extracts which could have additive effects. However the effort to utilize traditional knowledge in the light of modern scientific findings is lacking in India. Accumulating evidences as well as in-vitro studies implicates inverse relationship between regular consumption of fruits vegetable and the risk of specific cancer. Diet derived nutritional compound mediated interventions in the process of tumorigenesis may be promising chemopreventive strategy with minimal toxicities to the physiological system.

Introduction

Consumers are nowadays very much concerned about the food they purchase and consume. Consumer wants the food containing antioxidant properties or can say functional food in safe and stable forms, so that the availability of daily requirements of functional food ingredient must be ensured for normal growth and development of the body. The functional food that can provide a health benefit such as increased dietary fibre, vitamins or minerals to the body. The incorporation of antioxidant compounds acts as an efficient way to fight against reactive oxygen species (ROS) generated in our body. As it is already known that the ROS causes oxidative stress and acts as a main trigger for different life threatening chronic diseases like cancer, diabetes, cardiovascular disease, aging etc. Therefore, seeing the consumers’ demand for value added products with bioactive ingredients, all small and large scale food industries are taking initiatives to process different types of food (fruits, vegetables, dairy, sea food, animal, microbial products etc.) to extract and purify its active fraction of functional ingredients to valorize different value added products. Functional ingredients may also be derived from different food wastes generated during processing of food. This practice provides additional economic benefits to food businesses. Food industries are also giving importance to different processing methods to extract high quality of functional food ingredients in large quantity because processing method affects the concentration of extracted bioactive compounds. The simple addition of functional ingredients may cause an unwanted and negative change of sensory and texture of food. Therefore, using novel processing technologies such as microencapsulation, the negative changes could be minimized or avoided because these technologies could prevent the inactivation of bioactive ingredients.

Introduction

Fruits contain various beneficial compounds that possess biological activities and can be used as pharmaceutical nutraceutical products. Most of the fruits contain polyphenolic components that can promote antioxidant potential on human health. Wild Blueberries, strawberries, plums, oranges, grapes, cherries and mangoes are rich in antioxidant. Additionally, anti-inflammatory, antibacterial, antifungal and chemopreventive effects are associated with the various fruits. Besides polyphenols, other compounds such as xanthones, carotenoids, saponins also exhibit health effects. Fruit consumption is considerably increasing in the daily diet because they supply high levels of biologically active compounds that impart health benefits beyond basic nutrition. Fruits provide an optimal mixture of antioxidants such as vitamins C and E, polyphenols and carotenoids, vitamins, phytoestrogens, glucosinolates and anthocyanins. Diets rich in fruits may help to delay the ageing processes and reduce the risk of certain types of cancer, cardiovascular diseases and other chronic diseases. The combination of vitamins, minerals, phenolic, antioxidants and fibre seems to be responsible for these effects. The most dietary components in fruits acting as antioxidants are fibre, polyphenols, conjugated isomers of linoleic acid, D-limolene, epigallocatechin, gallate, soy protein, isoflavones, vitamins A, B, C and E (group of tocopherols), calcium, selenium, chlorophyllin, alipharin, sulphides, catechin, tetrahy-drocurecumin, seasaminol, glutathione, uric acid, indoles, thiocyanates and protease inhibitors.

Introduction

Functional elements are non-conventional biomolecules in foods that have the ability to modulate one or more body metabolic processes or pathways, leading in health advantages and well-being promotion. Research has demonstrated a connection between food, health and well-being functional elements. Consequently, functional elements have health-promoting roles connected with multiple progressive steps at various phases of disease control, from initiation to growth. They can therefore be implemented efficiently in disease therapy and prevention. Therefore, the borderline between food and medicine is becoming very thin at a moment when the role of a healthy diet in stopping non-communicable diseases is well recognized. Functional elements include plant-derived, non-nutritious and biologically active chemicals that operate in the body to avoid certain non-communicable diseases from occurring.

Food contains over 900 phytochemicals. One fruit or vegetable serving (about 120g) can contain as many as 100 distinct phytochemicals. Previously, functional elements were believed to happen predominantly only as phytochemicals in plant products including whole grains, fruits and vegetables. However, in animal goods such as milk, fermented dairy products and cold water fish, probiotics, conjugated linolenic acid, long-chain omega-3, −6 and −9 polyunsaturated fatty acids and bioactive peptides are also discovered. Usually, functional elements happen in various forms in food such as glycosylated, esterified, thiolated or hydroxylated materials. They also have numerous metabolic operations that enable positive impacts in the body on several illnesses and target tissues (Balic et al. 2020).

Introduction

Pulses are annually grown leguminous crops that yield one to twelve grains/ seeds within a pod, and are often promoted in diet owing to their low cost and many beneficial nutritional effects (Craig 2009). The United Nations general assembly has declared 2016 as the international year of pulses (Oyeyinka et al. 2016). The Food and Agriculture Organization (FAO) describes pulses as the crops that are harvested only for dry grain. This definition excludes crops that are harvested green as food sources (such as green beans and green peas), crops that are used only for sowing purposes (such as alfalfa and clover) and crops used primarily for oil extraction (such as peanuts and soybean). India is the largest producer (around 25%) of pulses in the world and the Indian subcontinent covers the leading area in terms of consumption of pulses. It was also suggested that India can also increase the production output by 30%, considering a rise in government support prices for stimulating the growth of pulses and in case of a normal monsoon season (FAOSTAT 2008). The mainly grown pulses in India include mungbean (green gram), chickpea (Bengal gram), urd bean (black gram), lentil (masur), pigeon pea (arhar), cowpea, horse gram and peas (Tiwari and Singh 2012). In the western countries, nowadays pulses are one of the preferred food sources of the population, owing to ideological reasons and interest in vegetarian diet.

Introduction

Biological activation of grain or germination is a natural, biological processing techniques and traditional method that can be used to improve the nutritional, functional, and sensory properties of grains. During biological activation of grains, extensive phytochemical changes were reported in a variety of food grains, which reflects a dynamic and complex nutrient flux including remobilization, degradation and accumulation. During this process many hydrolytic enzymes were activated to hydrolyze the starches, proteins and, non-starch polysaccharides, which results in more oligosaccharides and free amino acids. Many nutrients and bioactive compounds reportedly increase and then decrease as they are utilized by the growing plant, which results in degradation of the high molecular weight polymers for generation of bio-functional substances. The biological activation of grains also realizes a significant growth of nutritional value by increasing the bioavailability of nutritional compounds, vitamins, bio-elements and other biologically active substances due to the partial hydrolysis of starch, proteins, hemicelluloses and even celluloses. Biological activation triggers the enzymatic activity in grain and dormant hydrolytic enzymes are activated, breaking down starch, fibers and proteins and leading to an increase in the amount of digestible compounds along with improvement of functional properties without any chemical modification. Also, the activity of some anti-nutritional factors (enzyme inhibitors, haemagglutinins, anti-vitamins etc.) decreases or disappears during activation, allowing a complete valorization of biological compounds in grains. During biological activation hydrolytic amylase enzymes, proteolytic enzymes, and catalase were activated in grains, which enhances the starch degradation, a complex biochemical process and thus lead to the conversion of insoluble granules to soluble starch and dextrin. Apart from positive shifting in the level of nutrition, biochemical activities which occur during activation also generate bioactive components of health-promoting activities through the enzymatic actions that are antioxidants in nature, such as ascorbic acid, tocopherols, tocotrienols and phenolic compounds, thus resulting in an increase of antioxidant activity.

Introduction

India is considered as the “Home of Spices”. They are a prized group of minor components and have been an integral ingredient of Indian diet. Since antiquity, spices form an important part of the Ayurvedic Pharmacopoeia (The Indian System of Medicine), with their widespread traditional use. With its wide climatic conditions and topographical features, India naturally possesses wide variety of medicinal flora. The country enjoys the distinction of being the largest producer and consumer of spices as well as the fastest growing spice market in the world.

Spices are potent plant foods that possess a wide range of nutrient bioactive compounds that contribute to improve health, while adding variety, colour, flavour and aroma to daily diet. The term spice or condiment applies to “such natural plant or vegetable products or mixtures thereof, in whole or ground form, as are used for imparting flavour, aroma and piquancy to and for seasoning food” (Sikri and Berwal, 2008).

Webster (2011) describes spices as ‘Any of various aromatic vegetable productions as pepper, cinnamon, nutmeg, mace, allspice, ginger, cloves, etc., used in cookery to season and to flavour sauces, pickles, etc.; a vegetable condiment or relish, usually in the form of a powder; also, as condiments collectively’.

Introduction

Food ingredients sector is indicating ample prospects for growth. The segment is an obligatory element for the growth of the food and beverage sector. These ingredients are also driving the development of the healthy functional foods industry to increase by 20% growth annually. Innovation in the food and beverage market, especially in the processed food domain, has created innumerable opportunities for new product development in the ingredients market as well. The segment is driven by the growing food processing industry and India is emerging as ingredients bowl of the future. Additionally, growing urbanization coupled with industrialization and changing lifestyles have led to growing demand for convenient food that offers health benefits, over and above the basic nutritional benefits of the foodstuff. There are nearly 10 to 15 broad classes of ingredients that include the very basic ingredients as well as certain value added ingredients that have niche applications. Key ingredients are preservatives, flavours, colours, hydrocolloids/stabilizers, emulsifiers, artificial sweeteners and value added health food ingredients such as omega-3-fatty acids prebiotics, probiotics etc. Until recently, there has been limited research into functional foods in meats, while functional foods in the dairy sector have been developed to a high degree. But meat is less allergenic than many other foods and much more research into the development and marketing of novel functional meat products is required. Such meat products would open up a new market for the meat industry. Nutraceutical and functional food industry is a very vibrant industry today with the claims and a clear mandate of health, wellness and prevention of diseases as one of its main goals.

Introduction

Increasing knowledge regarding the impact of diet on human health along with state-of-the-art technologies has led to significant nutritional discoveries, product innovations, and mass production on an unprecedented scale. In particular, naturally occurring bioactive extracts or single compounds thereof, that are believed to benefit human health, have spawned an important and dynamic new area of research resulting in substantial advances in nutritional knowledge. There is also growing awareness that dietary source and form of food may affect overall health. Suitably, the role of food as an agent for improving health has been recognized, initiating the development of new classes of food, known as functional foods (Honkanen 2009).

The concept of functional foods is to improve the general conditions of the body and decrease the risk of illness and disease. That is to say, bioactive compounds present as natural constituents or as fortificants in food having the potential to provide health benefits beyond the basic nutritional value of the product. Marine-derived nutrients and other marine bioactive components have excellent potential as functional food ingredients as they possess advantageous physiological effects, with medicinal characteristics and added health benefits such as anticancer or anti-inflammatory activity.

The marine world, due to its phenomenal biodiversity, is a rich natural resource of many biologically active compounds such as polyunsaturated fatty acids (PUFAs), sterols, proteins, polysaccharides, antioxidants and pigments. Many marine organisms live in complex habitats exposed to extreme conditions and, in adapting to new environmental surroundings, they produce a wide variety of secondary (biologically active) metabolites which cannot be found in other organisms. Moreover, considering its great taxonomic diversity, investigations related to the search of new bioactive compounds from the marine environment can be seen as an almost unlimited field.

Introduction

In recent years, food scientists, nutritionists and health experts have become more inclined towards functional food components present in various food sources due to their positive influence on health, which is beyond providing the basic nutrition.Nowa days, generalconsumers are also seeking healthier food options because of nutritive food habits and awareness. Therefore, it has triggered the studyof food and deep mining of food components from nutritional and health benefit’s perspective also. Functional food ingredient can be defined as any componentwhich is more than a source of nutrient i.e. provides additional specific health benefits. Milk is well known to exert positive effect on human health, provides nutrition and widely consumed all across the globe in form of either milk or milk products. As per the definition, milk is heterogeneous blend of lacteal secretion which contains various elements that displays wide range of chemical and functional activities. It has been more than a source nutrition and supplement to different age groups either neonates, youngsters or grown up peoples (Park, 2009). It is one of the basicelements of many diets either in its native form or fermented form which every class of people can afford and had evolved as one of the important nourishment sources. Milk in its native form contains fewer bioactive components while fermentation process produces numerous secondary metabolites which possess various health-beneficial properties (Stanton et al., 2005).

Introduction

During the first 50 years of the 20th century, scientific focus was on the identification of essential elements and their role in the prevention of various dietary deficiency diseases. This emphasis on nutrient deficiencies or “undernutrition” shifted dramatically, however, during the 1970s when diseases linked to excess and “overnutrition” became a major public health concern. “Let food be thy medicine and medicine be thy food”, the age old quote by Hippocrates is the ideology of today’s health conscious population. Eli Metchnikoff, the Russian Nobel prize winner was the first one to recognize the beneficial role of selected bacteria on gastrointestinal tract of humans. Subsequently the “Theory of Longevity” by Metchnikoff was correlated with prolonged youth and a healthy old age, observed largely in Balkan peasants of those times, who used cultured milks in their diet (Kaufmann, 2008). Since then, the quest continues for understanding the role of wide range of food components and nutrients in enhancing health or preventing chronic diseases. The research in this field has resulted in a plethora of new labels for pro-, pre- and synbiotics.

Introduction

Hippocrate, an ancient physician, a great thinker and also often referred as father of medicine, for the first time conceive the idea nearly 2,500 years ago that a disease is caused due to natural factors such as environmental factors, diet, and living habits. He advocated the secret of healthy living in healthy food in his famous quote “Let food be thy medicine and medicine be thy food”. But unfortunately, this wisdom about food has faded with the time and we became dependent on synthetic medicines and drugs for even life style disorders. In the last century, research advancement in the field of food science and nutrition established food not only as a source of nutrition but also a source of active food components that aid specific functions and rejuvenated the Hippocrates concept. According to the Department of Health and Human Services, USA, daily diet of a person, plays a crucial role in 5 of 10 diseases which are the leading causes of death, such as diabetes (noninsulin dependent or type 2), stroke, coronary heart disease (CHD), specific type of cancer, and atherosclerosis. In the mid-1980s, term “functional food” was introduce in Japan and defined as food that contain active components either from plant or animal origin and provide physiological benefits in addition to the basic nutritional needs.

Introduction

The art of fermentation process is developed as far back as thousand years ago without understanding the role of microorganism in it. It is believed that the process of fermentation originates in Indus valley during 7000 – 8000 BC. Archives of harappan civilization showed that different clay utensils were used for the fermented product and the agriculture and animal husbandry were fully developed during that period. It is evident from the artifacts of Egypt and middle east that the practice of fermentation was common in that part (Farnworth, 2003). The earliest practice of cheese making is originated from Falcate between Tigris and the Euphrates rivers in Iraq, 8000 years back. Later, Egyptians developed the use of yeast in wine and bread making during 4000 BC (Ross et al., 2002). Further, Sumarians prepared beer from fermented barley during 1750 BC. Earlier the fermenting process was an artisan way without any knowledge of microorganism. However, the main turning point was in 1608, when Antony Van Leeuwenhoek first established the use of a microscope and revealed the existence of microorganisms. Another, major finding was Pasteurization by Louis Pasteur in 1861 AD and this was the first report that documented the role of microorganism in fermentation. Later, there was a shift observed in the production of fermented food from local communities to large scale industry. The health effect of fermented food was first reported by Roman historian Pliny, who reported that fermented milk is beneficial for gastrointestinal complains. Further, a French paediatrician proved that Bifidobacteria in food prevents infants against infection (Grill et al., 1995).

Introduction

COVID-19, a worldwide pandemic, addresses a deflationary stun for the worldwide economy. The outbreak of coronavirus has had a significant impact on public health worldwide and all stages of various industries’ supply chain and value chain. The 2019 novel coronavirus (2019-nCoV) or the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is rapidly spreading from its origin in Wuhan City of Hubei Province of China to the rest of the world. The infection began in bats and was communicated to people by inhalation or contact with infected droplets, and its infection time frame goes from 2 to 14 days. Primary manifestations in hospitalized patients with COVID-19 include fever (98%), cough/hack (76%), and myalgia or weakness (44%). Severe complications include acute respiratory distress syndrome (ARDS), RNAemia, acute cardiac injury, and multiple organ failure. However, exaggerated immune responses may lead to Cytokine Storm. Cytokine storm syndrome includes ARDS, shock, and multi-organ failure (Zheng et al., 2020). Many people are asymptomatic also, and the severity of this disease varies from person to person. The fatality rate is estimated to range from 2 to 3%. Typical/low white cell checks can analyze it with raised C-responsive protein (CRP), periodic modernized tomographic chest examination. The infection spreads quicker than its two predecessors, the SARS-CoV and Middle East respiratory disorder Covid (MERS-CoV); however, it has lower casualty. The worldwide effect of this new scourge is yet questionable (Singhal, T. (2020).

Introduction

Food and nutraceuticals are obtained from various agricultural resources available in this planet. Many types of bio-active compounds are available in small quantities in the plants and animals which are evidenced to improve performance of various organs, increase in immunity and cure for some diseases. Last decade evidences several advancements in developing phytochemical formulations which can be used as a cure for many diseases as well as helps in boosting immunity in human being. Such materials exist in different form, structure and chemical compositions. Examples of such chemicals are phenolic and organosulphur compound (Pascall 2011). The vegetables, fruits and seeds are used without further processing. Some plants are subjected to cooking before its consumption. Many industries are carried out extraction of bioactive compounds and developed products in the form of tablets, powders and liquids which are available in the market. In order to make commercial process more economic and feasible, long term storage of plant residues (Raw materials) as well as the prevention of the extracts emerges as essential requirement for the industries. Moreover, the products requires suitable packaging solution to increase its self-life, preventing it from the influences of environment, and to make viable solution for easy access which makes it more user-friendly. Suitable packaging solution is required for mainly the three reasons: (i) prevention. (ii) protection and (iii) presentation. Prevention is required in-order to avoid deterioration of the packaged items due to microbial growth, loss in moisture and enzymatic action. Protection is required for the purpose of protecting the packaging materials from the contamination as well as from the environment impact and rough handling. Presentation is equally important to provide it an aesthetic look to make it more approachable to the consumers. Moreover, packaging also offers “labelling for easy identification, warnings, instructions, and nutritional information, ease of transportation” (Pascall 2013).

Globalization of economies and liberalization of trade has led an urgent need for prioritizing the potential areas for investment in order to earn handsome amount of income. Even the entrepreneurs, small as well as marginal farmers aspire to take advantage of global opportunity. Diversification to horticultural crops has been found to be best option as they make more profit, generate additional employment for rural masses and conserve natural resources. Agriculture plays a vital role in the Indian economy. Over 52 per cent of the rural households depend on agriculture as their principal means of livelihood. But unfortunately Indian farmers in general are small and marginal land holders with poor resources and realizing income mainly from cereal based production system, which is insufficient to improve their living standards. Agriculture, along with fisheries and forestry, accounts for one-third of the nation’s GDP and is its single largest contributor (www.indianbusiness.nic.in). GVA at Basic Prices for 2019-20 from ‘Agriculture, Forestry and Fishing’ sector is estimated to grow by 2.8 per cent as compared to growth of 2.9 per cent in 2018-19. The GVA estimates of this sector are based on 1^st advance estimates of agricultural production during Kharif season of 2019-20 obtained from the Ministry of Agriculture & Farmer Welfare. For Livestock sector, estimates of production of major livestock products (i.e. Milk, Egg, Meat and Wool) obtained from the Department of Animal Husbandry & Dairying and Fish production data obtained from Department of Fisheries have been used. The crops including fruits and vegetables account for about 56 per cent, the livestock products 30 per cent and forestry & fisheries 14 per cent share of GVA in total GVA of ‘Agriculture, Forestry and Fishing’ sector [As per the estimates released by National Statistics Office, Ministry of Statistics and programme Implementation, GoI, 2020]. Agricultural exports constitute a fifth of the total exports of the country. In view of the predominant position of the Agricultural Sector, collection and maintenance of Agricultural Statistics assume great importance. In 2018-19, India achieved a record food grain production of 285.17 million tonnes beating the previous year’s (2017-18) 285.01 million tonnes, according to data provided by Department of Economics and Statistics (DES). Also, agricultural profitability has increased over the last decade with record increases in MSPs (minimum support prices) for agricultural produce for all covered crops.

Bhatia, (1965) in his study on “Patterns of Crop Concentration and Diversification in India” has observed that physical, socio-economic and technological factors have affected the magnitude of crop diversification. Variations in above mentioned factors are responsible for variations in patterns of crop diversification in India. He has also evolved a new technique for measuring crop diversification in India. He has taken all the crops which are having 10 per cent or more than 10 per cent of the cropped area. He summed up the total area under these crops and divided the sum by the number of crops. According to his method, higher the index, lower is the magnitude of crop diversification and vice-versa.

Ayyar, (1969) in his study “Crop Regions of Madhya Pradesh: A Study in Methodology” has evolved a new technique for measuring crop diversification regions. He has taken all the crops which were having 1 per cent or more than 1 per cent of the total cropped area. Then he divided the sum of crops by the number of crops which are having 1 per cent or more than 1 per cent of the total cropped area. His method is an improvement over Bhatia’s and Singh’s methods for measuring crop diversification.

Patel and Pawar (1980) studied the marketing of fruits in Mahatma Phule market, Bombay. The study showed that there was close relationship between wholesale prices and supply position, whereas there was no such pattern in case of retail prices. The producers’ share in consumers’ rupee was 33.07 per cent for sweet oranges. In case of apples, mangoes and grapes, the share of the producer in consumers’ rupee varied according to the varieties and ranged from 33 to 54 per cent. The study also made some suggestions as standardization and grading, and establishment of cooperative marketing societies for getting better prices for the producers.

The present investigation entitled “Diagnostic Study of Farmers in context of Price spread analysis, marketing pattern and Potential assessment of agricultural diversification in Chenani Block of Udhampur district” was carried out during the year 2015. The sampling structure, experimental procedures and techniques adopted during the course of investigation have been described in this chapter.

3.1 Locale of study

The present study was conducted in Chenani block of Udhampur district in Jammu and Kashmir state. Mantalai, Kosar, Bupp and Bashath villages were randomly selected.

3.2 Climate and rainfall

The Jammu and Kashmir state is situated between 32⁰.17'–36⁰.58' North latitude and 37⁰.26´–80⁰.30´East longitude. The state is the northern most part of the India is girdled by Tibet to the east, China and Afghanistan to the north, to its west is Pakistan. To its south lies the states of Punjab and Himachal Pradesh and have been divided into three agro climatic divisions’ viz. outer plain and outer hills, middle mountains and Kashmir valley and inner Himalayas (Ladakh). The outer plains and outer hills includes Kathua and Jammu districts, extends up to Shivalik hills in the north. According to NARP (National Agricultural Research Project) classification this state has been divided into four agro-climatic zones: Temperate, Sub-tropical, Intermediate and Cold-Arid zone. In summer hot dry winds from plains of Punjab make it very hot, dust storms are common with occasional rain. Rainfall occurs from July to September. Average rainfall is 1143 mm and temperature shoots up to 46⁰C during May to June. During December to February temperature is between 13.5⁰C to 20⁰C, rainfall is 150 mm and in upper reaches there is snow. In the region of middle mountains and Kashmir valley winters are very cold. There is snowfall during winter and subzero temperature. In valley, winters are long and summers are short but pleasant. Average rainfall is 732 to 854 mm. The maximum temperature hardly ever goes beyond 35⁰C. In region of inner Himalayas, days are hot and there are no clouds in the sky. Winters are very cold. Temperature falls as low as minus 23⁰C. The average rainfall is 976 mm and humidity level is very low.

The results pertaining to the present investigation, “Diagnostic Study of Farmers in context of Price spread analysis, marketing pattern and Potential assessment of agricultural diversification in Chenani Block of Udhampur district” have been presented in this chapter.

4.1 Cost and return analysis of cereals, vegetables and fruit crops

For financial analysis of different enterprises, it is necessary to workout costs of various inputs, which needs to be deducted from the value of inputs. The cost and return analysis of cereal crop and vegetables in Mantalai village of Chenani block is presented in Table 4.1. Per hectare Cost A which included all the variable costs excluding the family human labour were found to be highest (?55416.38) for the cultivation of garlic followed by tomato (?54260.75) whereas raddish incurred lowest of ?29361.33. The cost B which included the fixed costs in addition to cost A were ?39020.89 for maize, ?59074.66 for tomato, ?37280.11 for cucumber, ?33361.33 for raddish, ?41053.97 for beans and ?59416.38 for garlic. The cost C i.e. total item wise per acre operational costs which also included the imputed value of family labour were found to be highest (?149074.66/ha) in tomato and lowest of ?39361.33/ha in raddish. The cost C increases in case of tomato to such an extent only because of the addition of family labour. Cost C* was also calculated by adding 10 per cent of cost C as management cost to total cost.