eChapters

8.1 Pest Risk Analysis

Pest Risk Analysis (PRA) is a form of risk analysis conducted by regulatory plant health authorities to identify the appropriate phytosanitary measures required to protect plant resources against new or emerging pests and regulated pests of plants or plant products. Specifically pest risk analysis is a term used within the International Plant Protection Conventions (IPPC) (Article 2.1) and is defined within the glossary of phytosanitary terms as “the process of evaluating biological or other scientific and economic evidence to determine whether an organism is a pest, whether it should be regulated, and the strength of any phytosanitary measures to be taken against it. In a phytosanitary context, the term plant pest, or simply pest, refers to any species, strain or biotype of plant, animal or pathogenic agent injurious to plants or plant products and includes plant pathogenic fungi, bacteria, fungus-like organisms, viruses, nematodes and virus like organisms as well as insects, mites and weeds.

Diverse soil and climatic conditions prevailing in different parts of the country offer scope for cultivation of a variety of crops in India. Around 250 crops either cultivated or grown under natural habitat are used for vegetable purpose. The crops and varieties vary in their soil and climatic requirements, cultivation practices, resistance to pests and diseases, quality etc.

Considering the climatic conditions for growing vegetable crops and for evolving zone wise technologies and recommendations, the entire country is divided into eight agro- climatic zones under the All India Co-ordinated Research Project (Vegetable Crops) as given below:

Table: Agro-climatic zones and states under each zone

8.1 General

Pyrolysis is a process that utilizes heat or fire to separate biomass, derived from the ancient Greek words “pyro” meaning fire, and “lysis” meaning separation. A thermochemical conversion process transforms biomass into a useful intermediate liquid product. This product can then be converted into a hydrocarbon biofuel, oxygenated fuel additive, or a petrochemical substitute. Pyrolysis shares similarities with other thermochemical processes such as cracking, carbonization, torrefaction, destructive distillation, dry distillation, and thermolysis. However, it is not related to gasification, which involves chemical reactions with a gasification medium.

5.1 Basics of Writing

Writing news stories involves a specific set of guidelines and practices to ensure accuracy, clarity, and effective communication.

• Writing News Stories

A methodical approach is necessary when writing news articles in order to provide accurate, educational, and captivating information.

The word “arrhythmia” has been derived from ancient Greek ?ρρυθμος (arruthmos) via new Latin “arrhythmia”. Arruthmos is made up of ‘a ‘(without) and ‘rruthmos’ (rhythm) means without rhythm. By definition as per dictionary, arrhythmia is defined as any disturbance in the rhythm of the heartbeat. In fact in medical sense arrhythmias are the disturbances not only in cardiac rhythm but also in cardiac rate or both. The seat of generating impulse in the heart is the pacemaker, of highest automaticity, in the SA node. If any impulse is generated outside the SA node pacemaker it leads to arrhythmias.

4.1. Damping Off

4.1.1. Pythium

Pythium has filamentous (thread-like), hyaline, and coenocytic (non-septate) mycelial growth. The asexual or vegetative stage of Pythium produces sporangia (that germinate directly to produce a hypha or indirectly to give rise to a vesicle outside the sporangium, within which zoospores are formed) and sometimes hyphal swellings (spherical sporangia-like structures that do not give rise to zoospores).

9.1 Introduction

The world is facing various challenges, including climate change, population growth, and decreasing fertile land. It is necessary for the agricultural sector to shift towards sustainability and innovation. To revolutionize traditional farming practices, alternative cropping systems and advanced technologies like plant tissue culture in greenhouses are being explored. The goal is to optimize resource utilization, enhance crop resilience, and reduce the environmental impact. By adopting cutting-edge technologies, such as plant tissue culture, crops can be propagated and cultivated within controlled environments like greenhouses, ensuring global food security and meeting the growing population’s demands.

7.1. Introduction

The integrated farming system (IFS) is becoming increasingly important for effective farm resource management in order to increase farm productivity, reduce environmental degradation, improve the quality of life for resource-poor farmers, and ensure sustainability. Integration happens when one production sub-system's outputs (typically by-products) are used as inputs in another within the farm unit (Radhammani et al., 2003; Lightfoot and Minnick, 1991). IFS are a mixed farming system made up of at least two distinct but logically linked components of crop and animal enterprises. The integrated farming system is effective in reducing risk, increasing productivity and revenues, and improving the use of organic waste and agricultural leftovers.

Introduction

Scope and importance

Aquaculture is breeding, rearing and husbandry of aquatic animals such as f ishes, crustaceans and molluscs for food, ornament and sports. It is a husbandry involving special animals, the cold blooded vertebrates and invertebrates, whose physiology, growth, metabolic activities and overall performance depend heavily on ambient aquatic temperature and environment. Therefore, husbandry and the health management of aquatic animals is quite different from that of the other land based warm blooded animals.

Aquaculture is one of the fastest growing food production sectors in the world including India. Three decades ago, few species were cultured in India mainly in inland waters and then aquaculture was contributing less than 10 % of total f ish production in the country. In the last 25 years, there is a rapid growth in aquaculture with annual rate of 7-8% with significant contribution (above 60%)to total fish production today. The number of species cultured today in India including ornamentals is close to 40. Besides, a good number of plant and animal fish food organisms are cultured to support the hatcheries and nurseries in aquaculture. The area under aquaculture is increasing steadily in inland and coastal brackish water while marine water is also being added up for aquaculture slowly and steadily. Very interestingly, non-traditional environment such as manmade saline soils are also explored successfully for aquaculture. Intensification of culture activity with high stocking density artificial feed and fertilizers is another dimension of aquaculture noteworthy. Large scale movement of aquatic animals and their raw or processed products across national and international borders is important from aquaculture production and health point of view. In general, aquaculture package of practices alter the very water in terms of its chemistry and microbial load and has significant negative impact on the health of fish in culture system.

Statistical Series: When observations of any characteristic present in the individual of a group are recorded and arranged one after the other in a systematic order, they form a series, known as statistical series. For example: milk yield of 20 cows, height of the students in a class in a systematic order, etc. These are some important types of series:

• Discrete series: In this series, observations can take up only exact values and not any fractional values, is called discrete series. That means, this type of series has whole number of counting. For example: number of the students in a class, members of a family, number of births in a certain year, etc

• Continuous series: A series which can take up any numerical value (integral/ fractional) within a certain range is called continuous series. For example: milk yield of 20 cows, height, weight, temperature, etc.

• Array series: When we arranged the observations of a series either in ascending order of their magnitude or descending order of their magnitude, then it becomes an array series.

• Spatial series: When items of a series are given according to space or place or time, then such type of series is known as spatial series. For example: month wise milk yield of a herd of cows, month wise income or expenditure of an industry, population of a country according to states, etc.

Subject: Biostatistics and computer application (UNIT-I)

Write true (T) or false (F)

Q1. Write true (T) or false (F)

1. The mean and mode are always equal in case of normal distribution.

2. Pie diagram is circular diagram.

3. Skewness is the measure of asymmetry of distribution.

4. Mean sum of squares are the variances.

5. Coefficient of variation may be utilized for comparing two data of different unit.

6. Goodness fit is tested by t-test.

7. Variance is a measure of central tendency.

8. CRD can be use where experimental material is heterogenous.

9. Frequency polygon is made by joining the middle points of the top of each rectangle of histogram.

1. PhuleTriveni synthetic cattle evolved by the crossing of

a) Holstein x Jersey x Rathi

b) Holstein x Brown Swiss x Gir

c) Holstein x Jersey x Gir

d) Ayrshire x Jersey x Gir

2. Chhota nagpuri breed of sheep is found in

a) Nagpur

b) Uttar Pradesh

c) Jharkhand

d) Gujarat

Developmental Anomalies

Epitheliogenesis imperfecta of tongue

Abnormal smooth surface of tongue due to small filiform papillae. It occurs as a defect in autosomal recessive gene and occurs in Holstein-Friesian cattle. This is also known as smooth tongue.

Cleft palate

This is most common congenital abnormality that occurs due to failure of oral nasal cavity to divide leaving cleft. It may also extend towards lips producing ‘harelip’ condition.

Mega colon

There is distention of colon which abruptly terminates in rectum due to mutant gene in dogs.

This chapter deals with the findings of the study along with the discussion based on the analysis. This study tried to represent its findings as per the objectives of the study. At the end of this chapter, interrelation has been made, an explanation has been tried to put out down and an attempt has been done to reveal the cause behind it. The results and their pertaining discussion are presented according to the specific objectives of the study.

This chapter presents the analysis, interpretation and discussion of the collected data from the study area in an effort to attain the objective of the study. The data collected were analyzed with appropriate statistical test and presented in a systematic format.

The results of the study are presented under the following subheadings:

4.1 Distribution of respondents according to different socio-economic variables

Basic information of the respondents under the study has been given according to the socio-economic characteristic of the respondents. Variables like age, education, marital status, family size, family type, milk production per day, social status, farming experience, herd size, land holding and annual income are presented in the following table 4.1

This chapter deals with the findings of the study along with the discussion based on the analysis. This study tried to represent its findings as per the objectives of the study. At the end of this chapter, interrelation has been made, explanation has been tried to put out down and attempt has been done to reveal the cause behind it. The results and their pertaining discussion are presented according to the specific objectives of the study.

This table 6.1 presents the distribution of 15 independent variables (x1-x15 ) in terms of their Minimum, Maximum, Mean, Variance, Standard deviation, and Coefficient of variation.

Introduction

Agricultural production is necessary to fulfil nutritional requirements for human populations and global food security. The agricultural sector also forms the economic backbone of many low-income countries in which millions of farmers are employed (Anushka et al, 2022). However, managing agricultural production to achieve multiple objectives of providing food, supporting livelihoods and protecting biodiversity and forests is a challenge especially in tropical, low-income countries (Anushka et al, 2022). Usually, the growth in global agricultural production is largely driven by commercial and export oriented commodities. One such agricultural commodity that has high global demand is cashew (Anacardium occidentale L.). Cashew is presently cultivated in 33 countries including India in the world. Global land area for cashew cultivation between 1980 and 2018 has seen an eleven-fold increase from 526,250 ha to 5,972,724 ha (Anushka et al, 2022).

According to the facts, groundwater salinization and the scarcity of freshwater are indeed expanding. In the coming decades, saline water will replace freshwater as the principal resource for agriculture and aquaculture. Over 8.62 million hectares of land in India and over 397 million hectares of land worldwide have been rendered unusable for traditional agriculture as a result of secondary salinization. Use of salinized land and the water resources for aquaculture is a flexible solution to reduce environmental problem with multiple potential benefits on the economic, social, and environmental fronts. As aquaculture demand has increased, new production methods have been developed. Inland saline aquaculture, here defined as a land-based aquaculture system using saline groundwater and surface water, is practised by a number of countries, including Israel, USA, India, and Australia. The possibility that saline groundwater may differ chemically from coastal seawater is one of the key barriers to the growth of inland saline aquaculture. One must either change the chemistry or choose species that can tolerate the fluctuations to get around this. Several species are farmed or evaluated for their potential including finfish like tilapia, Indian Major Carps, catfishes, climbing perch, Asian sea bass, cobia, milkfish, mullet, and sturgeons. By combining the usage of resources, cultural systems play a significant part in attaining the disruptive technology of inland saline aquaculture. This review revealed the finfish species raised in inland saline resources as well as culture methods such as pond-based, tank-based, biofloc, and aquaponic systems for inland saline aquaculture. One of the cutting-edge food production methods required to boost aquaculture productivity and meet the expanding seafood demand is inland saline aquaculture. In spite of this, inland saline aquaculture has yet to become an industrial-scale and rural business to produce sustainably from unutilized lands.

Introduction
Environmental science plays a critical role in understanding and addressing the complex interactions between human activities and the natural world. This chapter explores the intersection of environmental science and agriculture, emphasizing the importance of ecological balance for sustainable development. As agriculture continues to be a major driver of environmental change, understanding its impacts on ecosystems, biodiversity, and climate is crucial for developing strategies that promote sustainability.
The chapter begins by examining the environmental impacts of agriculture, including land degradation, deforestation, and pollution. It then explores agroecology and biodiversity, highlighting the importance of maintaining diverse ecosystems to support sustainable agricultural practices. Sustainable resource management is discussed as a key approach to conserving natural resources and minimizing the environmental footprint of agriculture.
Climate-smart agriculture, a modern concept that integrates environmental sustainability with agricultural productivity, is introduced as a solution to mitigate the effects of climate change while ensuring food security. The chapter also covers environmental regulations and policies, which are essential for guiding sustainable agricultural practices and protecting the environment.
As the chapter progresses, it delves into the importance of environmental science in food security, the impact of environmental factors on global warming, and various modern concepts in environmental science, including sustainable food systems, circular economy, and ecosystem-based approaches. The chapter concludes with a discussion on combating food security and global warming challenges through sustainable practices and policies.
Environmental science plays a crucial role in agriculture by studying the interactions between agricultural practices and the natural environment. This chapter explores various aspects of environmental science in agriculture, including the environmental impacts of agriculture, agroecology and biodiversity, sustainable resource management, climate-smart agriculture, and environmental regulations and policies. Agriculture and the environment are inherently interconnected, as agricultural practices have both direct and indirect impacts on the natural environment. Environmental science in agriculture aims to understand these impacts and develop sustainable practices that minimize negative environmental

4.1 Introduction
There are special casting processes as listed below.
i. Shell casting
ii. Investment casting
iii. Ceramic mould casting
iv. Pressure diecasting
v. Centrifugal casting
vi. CO2 casting process
vii. Stir casting
viii. Squeeze casting
ix. Full mould casting
x. Magnetic casting
xi. Micro casting
4.2 Shell Casting
The complete aspect of shell casting has been already presented under shell pattern in Section 2.4.1.3. For the purpose of reinforcement, it is reproduced here. Sand that has been covered in resin is used as the mould in the casting process known as shell mould casting, or just shell moulding. After pouring molten metal into the mould’s cavity, the mould vaporizes to produce a hard shell. This process will have two or more patterns to give shape and size to the final product to be casted.
The steps of making shell mould are presented below.
1. In the case of two pieces of patterns, make each pattern using iron or steel.
2. A mould is made once the pattern has been made. In this stage, a lubricant is applied after both pattern components have been heated. After that, each pattern piece is placed at the top of a dump box which contains resin covered sand. Then the pattern will absorb the sand.
3. Invert the dump box to free the excess sand particles sticking the patten.

4.1 Introduction
4.1.1 Overview of Genomics in Biotechnology
The genome of an organism serves as the ‘blueprint of life’ (Baeza, 2024) and functions as an information repository (Goldman & Landweber, 2016), containing the necessary information for the synthesis of molecules, cells, and tissues (Abera et al., 2017). A study of the entire collection of genes within an organism’s genome is known as genomics (NIH, 2022; WHO, 2025). Genomics encompasses aspects of genetics, focusing on the comprehensive characterization of an organism’s entire set of genes rather than on individual genes (Baeza, 2024). The investigation of living organisms has undergone a transformation through the application of genomics and related fields, providing unique insights that enhance various applications aimed at improving human life, economic conditions (Kalaitzandonakes et al., 2023), and environmental sustainability (Mudaliar et al., 2023).
According to a genomic analysis, 80% of the 6,000 rare disorders have genetic causes (Brittain et al., 2017). Cancer, a genetic disease, has revealed through DNA sequencing the mutational events and oncogenic drivers (D. Wang et al., 2023). Genomic tests contribute significantly to the prediction and prevention of diseases, including familial hypercholesterolaemia (FH) (Brittain et al., 2017). Agricultural industries are currently confronting multiple challenges, including global changes in climate (Bai et al., 2024), growing populations (Putri et al., 2019), resource depletion (Feng et al., 2023), reduction of cultivable land (Mirzabaev et al., 2023), and the prevalence of pathogens (Hossain & Roslan, 2023). Advances in genomic technologies, such as DNA sequencing and gene editing, have transformed the field. DNA sequencing includes; Nextgeneration sequencing (NGS) (Marudamuthu et al., 2023), Ribonucleic acid sequencing (RNA-seq) (Upton et al., 2023), whereas, gene editing methods includes; Clustered Regularly Interspaced Short Palindromic Repeat- CRISPR associated protein 9 (CRISPR/ Cas9) (Q. Liu et al., 2021), Transcription activator-like effector nucleases (TALENS) Zinc-finger nucleases (ZNF) (Malzahn et al., 2017) and Oligonucleotide directed mutagenesis (ODM) (Ravikiran et al., 2025) as well as doubled haploids (Chen et al., 2024), molecular markers (Kumar et al., 2024) and mapping populations (Temesgen, 2021), offers potential solutions against such agricultural challenges (Hossain & Roslan, 2023). Genome sequencing techniques are applied to various fields of industrial biotechnology such as; strain development or improvement (Salazar-Cerezo et al., 2023), enzyme discovery (Zaparucha et al., 2018) and analysis of microbial community (Hosokawa et al., 2022). The potential to enhance microbial strains through the incorporation, deletion, or alteration of

Sabadilla: A botanical insecticide extracted from seeds of Schoenocaulon officinale

Safener: A chemical additive that reduces the phytotoxic properties of a pesticide.

Salivarium or salivary reservoir: The cavity into which the salivary gland opens, between the hypopharynx and the labium.

Salivary gland: The exocrine gland that produces saliva and typically associated with the labial segment; highly variable in size, structure, and function.

Saltation: Discontinuous variation produced at a single step by mutation (cf. Mutation).

SAE: Society of Automotive Engineers; used to indicate a grade or weight of oil measured according to the SAE.

Safe load: The load that a piece can support without exceeding the working unit stress.

Safety device: An installation designed to protect the operator or other persons. E.g., shields, grass-catching equipment, deflectors, covers for chains, belts, drive shafts, etc.

Safety factor: The degree of surplus strength over and above normal requirements, which serves as insurance against failure.

Safety hitch: A hitch incorporating a device to avoid breakage when an implement works against an abnormal resistance.

Safety valve: 1. An automatic valve, which opens and relieves the pressure when it reaches a predetermined value, thereby protecting the system and operator. 2. A safety device for allowing steam or water to escape from a boiler when the pressure may become dangerous. Usually adjusted to permit not more than 5 pounds of pressure above maximum allowable working pressure of the boiler.

C - enamel can : The sulphur resistant lacquer is golden coloured and the can coated with it are called C-enamel can or sulphure resistant can, used for packing non acid products.

CA storage : Storage of commodities under gaseous atmosphere like gas storage, where the composition of atmosphere is controlled accurately. MA and CA differ only in degree of control and CA is more exact. These storage methods in combination with refrigeration markedly enhance storage life of fruit and vegetables.

1.    Introduction
    
2.    Edible coatings used in Seafood Products
    2.1    Pre-dust
    2.2    Batter
    2.3    Breading
    
3.    The Coating Process
    3.1    Portioning
    3.2    Pre-dusting
    3.3    Application of batter
    3.4    Application of breading
    3.5    Pre-frying / Flash frying
    3.6    Freezing
    3.7    Packing and storage
    
4.    Coating Process Equipment
    4.1    Forming machine
    4.2    Pre-dusting machine
    4.3    Batter application equipment
    4.4    Breading application equipment
    4.5    Fryers
    4.6    Spiral freezers
    
5.    Coating Process Lines
    5.1     Single line breading system
    5.2     Tandem line breading system
    5.3     Tempura or batter-fry  Line breading system
    5.4     Tempura-Japanese Line breading system
    
6.    Coated Fishery Products
    6.1    Fish fingers
    6.2     Coated fish sillets
    6.3     Fish mince based coated products
    6.4     Coated shrimp products
    6.5     Coated squid products
    6.6     Coated bivalve products
    6.7     Crab claw balls
    
7.    Common Quality Problems Encountered during the Coating of Seafood
    7.1     Voids
    7.2     Blow off
    7.3     Pillowing
    7.4     Tailings
    
8.     Innovative Processes in the Production of Coated Products
    
References

Concern for improvement of nutritional quality of vegetables has arisen in the context of providing nutritional security to our ever-increasing population. Nutritional security denotes the consumption and physiological use of adequate quantities of safe and nutritious food by every member of the family and encompasses the process of equitable distribution among members of household and communities (Nandi and Bhattacharjee, 2002). This would entail the need to ensure a varied food intake, comprising all the essential macro-and micronutrients (protein, carbohydrates, minerals and vitamins), plant pigments (lycopene, beta-carotene, anthocianin, lutein, capsanthin, zeaxanthin, etc.) and other functional phytochemicals (secondary metabolites, like flavonoids, isothiocyanates, glucosinolates, etc.) through a diversified diet. In this regard, production and consumption of vegetables that are the valuable source of micronutrients, beneficial phytonutrients and highly functional phytochemicals hold the key in assuring nutritional security.

Implication of vegetables in diet has been well conceived among the high-income group in the world since human health in recent years has assumed an unprecedently important status. Increased interests in nutrition, fitness and beauty have exaggerated concerns over diet and human health. A new diet-health paradigm is evolving which places more emphasis on the positive aspects of diet. Foods have now assumed the status of functional foods, which should be capable of providing additional physiological benefits, such as preventing or delaying the onset of chronic diseases as well as meeting basic nutritional requirements so with high-income elasticity, the demand for vegetables and perception of diversified diet have been growing steadily, hence, both access and consumption of vegetables have been increasing in the urban and peri-urban population groups. However, meeting the requirements for macro- and micronutrients for most of the population groups in households and communities of South Asia, Latin America and African countries seems far off because of meager presence of vegetables in the diet. In south Asia where meat intake is low, ascorbic acid emerges as one of the most important enhancers of iron absorption. This is attributed to the fact that foods containing vegetables may provide an optimal mix of minerals, vitamins, antioxidants, dietary fibers and other non-nutrients bioactive compounds.

1. GENERAL INFORMATION

India’s exports of Processed Food was Rs. 31563.43 Crores in 2014-15, which includes products like Mango pulp (Rs. 841.39 Crores), Dried and Preserved vegetable (Rs. 847.11 Crores), Other Processed Fruit and Vegetable (Rs. 2,569.93 Crores), Pulses (Rs. 1,209.51 Crores), Groundnuts (Rs. 4,675.35 Crores), Guargum (Rs. 9,480.00 Crores), Jaggery and Confectionary (Rs. 1,161.81 Crores), Cocoa Products (Rs. 848.62 Crores), Cereal Preparations (Rs. 3,038.79 Crores), Alcoholic and Non-Alcoholic Beverages (Rs. 2,231.58 Crores) and Miscellaneous Preparations (Rs. 2,437.77 Crores).

Safe, wholesome and nutritious food is vital for sustenance, good health, food and nutritional security and augmentation of sustainable development of an individual. Also, safe food helps in the growth of the national economy and enhances the trade and tourism sector. Foods that are unsafe containing various kinds of microorganisms can cause chronic diseases or illnesses varying from diarrhea to cancer.

C - enamel can: The sulphur resistant lacquer is golden coloured and the can coated with it are called C-enamel can or sulphure resistant can, used for packing non acid products (Plate 81).

CA storage: Storage of commodities under gaseous atmosphere like gas storage, where the composition of atmosphere is controlled accurately. MA and CA differ only in degree of control and CA is more exact. These storage methods in combination with refrigeration markedly enhance storage life of fruit and vegetables (Plate 82).

CAC: It stands for Codex Alimentarious commission (1962). It is a joint commission of FAO and WHO, comprising of 146 member countries. It ensures consumer food safety, establish fair practices in food trade and promote the development of international food standards. CAC make standards for food additives, veterinary drugs, pesticide residue and other miscellaneous substances that affect consumer safety. These are published in Codex Alimentarius.

Cacao: The dried partly fermented fatty seeds of Theobroma cacao of the family Sterculiaceae that are used in making cocoa, chocolate, and cocoa butter called also cacao bean (Plate 83).

CAD: CAD (computer-aided design) is the use of computer-based software to aid in design processes. CAD software is frequently used by different types of engineers and designers. CAD software can be used to create two-dimensional (2-D) drawings or three-dimensional (3-D) models (Plate 84).

Dispersion

Measure of central tendency tells about the central position of the series. They do not throw like on the formation of series because in some cases, two series may have a same measure of central tendency but differ in their composition. In order to study the formation, composition, structure and scatteredness of the items of the series, measure of second order are necessary. The measure of second order will give idea about the formation of the series. As the representation of a series on the basis of its measure of central tendency is not sufficient but when a series is represented on the basis of its measure of central tendency as well as its measure of dispersion, then it will give the complete adequate representation of the series. Therefore, it is defined as the extent or degree of which data tend to spread around an average is called the dispersion. It is also known as variability or measure of second order.

Characteristics of an ideal Measure of Dispersion

An ideal measure of dispersion should possess the following properties:

1) It should be rigidly defined i.e. it has a fixed and finite value

2) It should be easy to understand

3) It should be easy to calculate

4) Its calculation should be based on all the observations

5) It should be capable for further algebraic treatment

6) It should not be affected by extreme values of the observations

7) It should be least affected by fluctuations of sampling

Etiology

Etiology is the study of cause of disease. It gives precise causal diagnosis of any disease. Broadly, the cause of diseases can be divided into two

a. Intrinsic causes.

b. Extrinsic causes.

Intrinsic Causes

Those causes which determine the type of disease present within an individual over which he has no control. These causes are further divided into following subgroups:

Genus

Specific diseases occur in a particular genus or species of animals. e.g. Hog cholera in pigs, Canine distemper in dogs

10.1. Classification of Primates

The classification of primates is a complex topic that has been revised over time as our understanding of these fascinating creatures has evolved. Here’s a breakdown of the current classification system:

10.1.1. Order: Primates

Primates are an order of mammals that includes lemurs, lorises, tarsiers, monkeys, apes, and humans. They are characterized by a number of shared features, including:

• Opposable thumbs: This allows primates to grasp objects and manipulate their environment.

• Forward-facing eyes: This provides primates with depth perception, which is important for arboreal locomotion and foraging.

• Enlarged brains: Primates have relatively large brains for their body size, which is associated with their intelligence and complex social behaviors.

• Reduced sense of smell:Compared to other mammals, primates have a weaker sense of smell. This is thought to be due to their reliance on vision for foraging and social interaction.

Definition
Bacteria belong to proakaryota which encompasses organisms with a primitive type of nucleus lacking a clearly defined membrane .The bacteria are smaller than fungi and measure about 0.5 to 1.0 x 2.0 to 5.0μ.
Structure of bacteria
1. A bacterial cell consists of a cell wall and a compound membrane enclosing protoplasm.
2. The protoplasm contains the nucleus, vacuoles, mesosomes, lipids, polysaccharides, mitochondric granules, and spores.
3. Bacterial cells may have flagella, pili, fimbrae, and capsules on the outside.
4. The bacterial cell contains a characteristics cell wall. The cell wall of bacteria is composed of a peptidoglycan. It is composed of acetyleglucosamine and cetyle-muramic acid .
5. The rigid peptidoglycan layer is located.
6. The latter layer is composed of lipoprotein . It is common in gram negative bacteria.
7. Many bacteria possess other intracellular membrane systems such as mesosomes and chondrioids.
8. The mesosome structure is formed by an invagination of the cytoplasmic membrane.
9. Mesosomes serve for compartmentalization and integration of biochemical systems.

Flood-control economics compares the financial, social, and environmental costs of flood damage with the costs and benefits of alternative mitigation measures. Because complete protection is generally impractical, planners must identify an economically justified level of risk reduction. Evaluation considers construction, operation, maintenance, rehabilitation, residual risk, avoided losses, project life, discount rates, and direct and indirect benefits. This chapter introduces economic assessment of flood-control projects and examines flood-damage estimation, depth-damage relationships, benefit-cost analysis, present value, and investment decision criteria. It also considers remote-sensing approaches for mapping inundation and assessing losses. The discussion supports the selection of measures that are technically feasible, socially acceptable, environmentally responsible, and economically efficient.

Climate Change: Understanding our Earth and Atmosphere

Our Mother Earth is the fifth largest planet in the solar system and the third from the sun. It is also the sole planet whose name comes from old English language only, and not from names of any other celestial bodies, whose names originated mostly from Greek/Roman mythology. Earth has a diameter of 6378 km, of which the earth crust (uppermost skin) is only 24 km. Earth is the only planet where water exists as liquid and 71% of its surface is covered by water. The earth’s atmosphere is made up mostly of nitrogen (77%) and oxygen (21%) gases. CO₂ consists of a very small (trace) fraction (0.03%) of atmosphere, but is most vital for the life cycle. When earth was created, it has got much higher CO₂ than today, and all of them have been sequestered in rocks as carbonates and dissolved in oceans and a negligible amount is distributed in plant communities. This extremely small quantity of CO₂ is keeping life on earth, by maintaining earth’s temperature at a comfortable 14°C (without CO₂, earth’s temperature would have been -21°C). This effect is called the ‘greenhouse effect’, revolving which all issues of climate change exist. It is also to be noted that water vapour is also an important greenhouse gas (GHG). It is to also to be noted that in spite of substantial increase in solar constant, earth’s average temperature has remained stable for billions of years. It is understood that this was possible through variation in CO₂, and it is the biological processes (Earth biosphere) that controlled the environment over years (Gaia hypothesis).

Pomegranate is one of the oldest known edible fruits and is associated with ancient civilizations of the Middle East. From its origin in the area now occupied by Iran and Afghanistan, the pomegranate spread east to India and China and west to Mediterranean countries (Turkey, Egypt, Tunisia, Morocco, and Spain). Spanish missionaries brought the pomegranate to the Americas in the 1500s (Hodgson, 1917; LaRue, 1980). The primary commercial pomegranate growing regions of the world are the Near East, India and surrounding countries, and southern Europe. The fruit is consumed fresh or processed into juice, syrup, jams, or wine (Fig. 1) (LaRue, 1980; Adsule and Patil, 1995; Kumar, 1990; Patil and Karale, 2001; Roy and Wasker, 1997).

15.1 Introduction

In recent years, the role of plant secondary metabolites as protective constituents in the human diet has been a growing area of research. Unlike the traditional vitamins, they are not essential for short-term wellbeing, but there is increasing evidence that modest long-term intakes can have favourable impacts on the human health. Teas, coffee and cocoa represent plantation cash crops grown in many of the warmer, less developed regions of the world. They serve as stimulant beverages and their demand is ever increasing day by daily. However, production of these beverages is under the severe threat due to attack from various pests and diseases which cause considerable damage.

The oil palm (Elaeis guineensis Jacq.) is recognised as the cheapest edible oil-yielding crop and has become one of the major oil crops in the world. The most productive oil-bearing crop, oil palm yields about three times the oil yield of coconut, seven times that of rapeseed, and ten times that of soybean. In terms of world production, palm oil maintains second place after soybean as a source of vegetable oil and has overtaken other crops such as rapeseed, sunflower, groundnut, and cottonseed. Under good agricultural management, a hectare of oil palm yields 5 to 7 tonnes of oil / year (Henson, 1991). The crop is unique in producing 2 distinct types of oil- palm oil and palm kernel oil- used for culinary and industrial purposes. Being rich in b-carotene, palm oil contributes substantially to nutritional and energy requirements of masses.

1.0 INTRODUCTION

“Biological control is the reduction of the amount of inoculum or disease producing activity of a pathogen  or parasite  in its active or dormant state, by one or more organisms, accomplished naturally or through manipulation of the environment, host or antagonist or by mass introduction of one or more antagonists ” (Baker & Cook 1974). The biological world is a vast interacting network of living organisms in a state of dynamic equilibrium, reflecting changes in their physical environment and their relations to each other. Organisms exhibit many type of interactions in the process of achieving biological balance.  An organism may exert no effect on another or it may stimulate or inhibit the growth or development of the associate, it may stimulate or inhibit the formation of resting spores of the associate or it may enforce dormancy or cause lysis of the associate (Cooke & Baker, 1983).

1.    Introduction    232
2.    Photosynthesis and Biomass Yields    232
3.    Biomass Properties    233
    3.1.     Polymeric and chemical composition, 233
    3.2.     Fuels analysis, 235
    3.3.     Physical properties, 236

The word protein was first coined in 1838 to emphasize the importance of this class of molecules. The word is derived from the Greek word proteios which means “of the first - rank”. Proteins are polymers/macro molecules made up of several amino acids. When there are more than 50 amino acids in a chain, the polypeptide is normally called a protein. Each protein in the cells of living beings has a unique sequence of amino acids that determines its biological function. The proteins are folded into specific defined structures, which are maintained by large number of relatively weak bonds. The three dimensional structure is well defined and suited to it’s specific function.

Crop improvement

Crop improvement refers to the genetic alteration of plants to satisfy human needs. It deals with the improvement of crops and production of new crop varieties, which are far superior to existing types in all characters. In pre-history, our ancestors in various parts of the world brought into cultivation a few hundred species from the hundreds of thousands available. In the process they transformed elements of these species into crops though genetic alterations that involved conscious and unconscious selection, the differential reproduction of variants. Through a long history of trial and error, a relatively few plant species have become the mainstay of agriculture and thus the world’s food supply. This process of domestication involved the identification of certain useful wild species combined with a process of selection that brought about changes in appearance, quality, and productivity.

Horticulture, which includes fruits and vegetables, plantation crops, spices, flowers, and medicinal and aromatic plants, has proved beyond doubt its potentiality for gainful diversification. One of the significant developments is that, horticulture has moved from rural confine to commercial production. Recently horticulture has emerged as one of the best option of diversification for effective land use planning and to achieve inclusive growth. The achievement in the development of horticulture through crop improvement is laudable, as the sector now contributes more than 30 percent to GDP of agriculture and has maintained the growth rate of more than 5 percent during the last two decades.

What so ever you are doing as a researcher, one important task is to publish the same for scientific fraternity for establishing your view points else no body will recognize you and your competence. Your credentials are judged by the research papers published by you and its impact on scientific community. Therefore, it is must to publish what so ever you are doing to establish yourself in the scientific community and also to advance science. This implies to select a national or international journal for your research publication which has wide scientific circulation so that peers of scientific world may observe your publication. Adversely, the publication may bring you criticism if it does not stand on scientific parameters and you may lose your reputation in your profession.

The family Solanaceae consists of 85 genera, which include both tuberiferous and non-tuberiferous ones.  Brinjal (Solanum sp.), chilli (Capsicum sp.) and tomato (Lycopersicon sp.) are the major fruit vegetables under the family.  In all genera, fruit is an indehiscent berry.
 
A key for the identification of the above  three genera are furnished below:
    A.    Anthers connivant in a cone, longer than filaments
    B.    Anthers dehisce by apical pores or short slits, leaves entire, lobed or pinnatifid : Solanum
    BB.    Anthers dehisce introsely by longitudinal slits, the tips empty, leaves pinnatiset : Lycopersicon
    AA.    Anthers not connivant in a cone, not larger than the filaments, dehisce by lateral slits : Capsicum

Transgenic plants are those plants, in which a foreign gene(s) has/have been introduced and stably integrated into the genome. The inserted gene sequence is known as Transgene. Almost three decades ago, in early 1983, the first cloning of the recombinant genes in tobacco signified the beginning of plant molecular biology in its own right. Since then the number of genes transferred and studied in plants has increased exponentially and the first transgenic crop (‘FlavrSavr’ tomato) was commercialized on May 18, 1994. However, the impact of transgenic crops was perceptible only after 1995 when transgenic maize, soybean and cotton were released for cultivation in USA.

Coconut is the most important palm of the wet tropics as a  major source of vegetable oil which also provides food, health drink, medicine, shelter, fuel, timber and fibre.  Because of its versatile nature, it is eulogised as ’Tree of Heaven’, ‘Tree of Life’, Kalpavriksha, Tree of Abundance, Natures supermarket and king of palms.  Oil is extracted from dried endosperm  which is called ‘copra’. The unopened flowering spathe, on tapping process, yields a delicious sap (Coconut Inflorescence Sap) rich in sugars and vitamin B, is called toddy from which sugar syrup and many products can be extracted.  An intoxicating drink called arrack can be prepared by distilling fermented toddy. The hard endocarps of fruits supply fuel and charcoal and mesocarp yields fibre for coir industry. Leaves are used for thatching houses.  Young unopened leaves are used to decorate festive places.

Pulses occupy an important place in hill agriculture. They are complementary to cereals in production and consumption being an important source of protein and nitrogen fixing ability which helps in improving soil health. Thus, cultivation of pulses has a positive relationship with our environment, human health and food security. Pulses produced in the hills are famous for their cooking quality, taste and flavour.
 
Himachal Pradesh has emerged as a model hill state in which agriculture is a dominant economic activity and major source of employment and income to the rural people. Being a hilly state, agriculture is practiced on about 10% of the geographical area. Out of which nearly 80% is rainfed. During the last three decades, the farming scenario has changed significantly. The area under fruits, vegetables and cereals has increased tremendously at the cost of pulses and oilseeds. There is, therefore, an urgent need to reverse this trend as pulse cultivation will not only increase soil health but save precious foreign exchange.

The average productivity of pulses (Table 1) is only 460 kg/ha but it ranges from 199 kg/ha (Moth bean) to 1719 kg/ha (Field pea). Year to year fluctuation in productivity of different pulses was also observed. The highest productivity i.e. 1067 kg/ha was observed during the year 2006-07 & the lowest productivity i.e. 497 kg/ha was recorded during the year 2008-09. The trend of area under pulse crop during the last ten years has also shown a wide fluctuation. Year to year and crop to crop variations are most pronounced.  The crop wise major pulse growing districts in Rajasthan are as follows.

The average productivity of pulses (Table 1) is only 460 kg/ha but it ranges from 199 kg/ha (Moth bean) to 1719 kg/ha (Field pea). Year to year fluctuation in productivity of different pulses was also observed. The highest productivity i.e. 1067 kg/ha was observed during the year 2006-07 & the lowest productivity i.e. 497 kg/ha was recorded during the year 2008-09. The trend of area under pulse crop during the last ten years has also shown a wide fluctuation. Year to year and crop to crop variations are most pronounced.  The crop wise major pulse growing districts in Rajasthan are as follows.