eChapters

Abstract

Over the years, India has emerged as one of the world’s biggest producers of milk, with the total milk production rising from 122 Million Metric Tons in 2010 to 171 Million Metric Tons in 2017 with dairy market in India touching a value of INR 7,916 Billion. An average livestock contributes about 12 % of farmer’s income and the same for small and marginal farmers and landless laborers’ is 36 %. While farmer’s income in agriculture is growing at 3.5 % annually, income from livestock is growing at about 14.5 %. Despite this, the majority of the dairy industry in India is still highly unorganized and dominated by small and marginal dairy farmers. Of all the major rural enterprises, dairy is an important profession of economic and social transformation to supplement the income and employment to the rural sector in general and rural women in particular. The process of dairy development would be incomplete and lop sided, unless farm women are fully involved in it. Indian dairy industry also offers good opportunities to both domestic and foreign investors for entry and expansion. Low yielding breeds, costly animal feeds, inadequate market linkage and predominance of handling dairy through indigenous technologies mar the Indian dairy industry. It is imperative to develop proper production, processing and marketing infrastructure if India has to emerge as an exporting country which is capable of meeting international quality requirements. It is anticipated that milk production in India will further grow at a CAGR of around 15% between 2018 and 2023. A comprehensive plan for producing quality and safe dairy products should be formulated with suitable legal backup. Dairy products’ consumption has been growing exponentially in the country owing to their rich nutritional qualities. Thus, it has enormous scope for women empowerment and socio-economic transformation of rural India and must rank top in our developmental agenda.

Abstract

Organic farming has proved to be effective technology for socio-economic empowerment of Indian farmers as it imposes positive changes in social factors in the local communities. There is tremendous scope of export, entrepreneurship and employment opportunities in organic farming in India. Local, regional, national and global markets are developing sinks for organic products. Organic crop production is sustainable and has positive impact on the ecology and socio-economic status of the peoples. Various socio-economic factors influence the farmers’ choice to adopt organic cultivation. Several threats and weaknesses exist. Hence, there is a need to address the weaknesses of the organic system by integrating it with innovative tools of marketing and ICTs so that there is alignment in demand- production-supply so concerted efforts are needed to establish production-consumption linkages through PPP mode. It will offset threats of organic farming thereby making it more remunerative and promising. The existing evidences suggest greater research efforts in this area are required. There is need to identify the gaps between the adoption of techniques of organic farming and remove them by strengthening production-consumption and marketing linkages. Moreover, it is important to assess and analyze the status of organic farming and feasibility to different sustainable practices in different production systems and farming situations across the country for promotion of this value added entrepreneurship.

Keywords: organic farming, status, constraints, entrepreneurship and socio-economic dynamics

Abstract

Biochar is the product of thermal degradation of organic materials in the absence of air (pyrolysis), and is distinguished from charcoal by its use as a soil amendment. Biochar is generally alkaline in pH and may increase soil pH with greater increase observed in sandy and loamy soils than in clayey soils. Biochar addition can increase cation exchange capacity, base saturation, exchangeable bases and organic carbon content as well as decreases in Al saturation in acid soils. Biochar enhances soil productivity by improving the physical, chemical and biological soil conditions. Improvement in soil structure increase soil water retention. A comparative study of soil fertility and leaching losses of nutrients between an Anthrosol and an adjacent unamended Ferralsols revealed that the Anthrasol had significantly higher P, Ca, Mn and Zn availability than the Ferralsol, and an increased biomass of both cowpea and rice by 38–45% without fertilization. More experimentation is needed to substantiate multiple benefits of biochar application in relevant soil-environment-climate-management factors and minimize any possible drawbacks in Indian perspective. Efficient use of biochar in agricultural system is one viable option that can enhance natural rates of carbon sequestration in the soil, reduce farm waste, enhance crop yield with concomitant improvement in soil quality.

Abstract

The J&K state, like other Himalayan states, is endowed with varied climates and agro-climatic situations and has the potential for improvement in a horticulture sector. Focus on selective issues based on the niches of the areas , strengthening the on-going programs of different developmental departments, site specific issues, backed up with latest technologies need to be identified which can have tangible and immediate impact on the farm economy. The horticulture section is doing well in Jammu and Kashmir state when compared with others food crops, since it fetches good price because of its nature of seasonality. The estimation of the potential profits can be drawn by the fact that a farmer producing wheat of 1 kg gets 10 times higher prices for the same produce in horticulture section. Considering this high potential, the concept of doubling farmer’s income can work magically with horticultural crops. There is a need of shift from traditional crops and cropping patterns. Technological interventions are required to strengthen the conditions of cold storage, adoption of farming system approach, instead of cropping system approach, incorporating element of diversification, promotion of cultivation of high value crops, efficient post-harvest management, value addition etc. popularization of technologies and schemes to achieve targeted growth in horticulture. Strengthening water resources through rainwater harvesting, soil moisture conservation and efficient utilization of stored/conserved rain water (micro-irrigation, fertigation). Promotion of niche commodities based on agro-ecological situations will benefit promotional efforts in horticulture development with increased benefit cost ratio.

Abstract

Worldwide trend in fruit crops has shifted to high density or meadow orcharding to manage tree size for desired architecture to allow better light interception and easy in operations such as pruning, pest control and harvesting. The meadow orcharding facilitates increase production as well as quality of fruits. High density planting (HDP) is one of the recent and novel concepts of increasing the productivity without affecting the quality of fruits. The HDP has been successfully demonstrated in fruit crops such as apple, mango, citrus, banana, pineapple and guava. However, for more location specific benefit research must continue on appropriate plant canopy, integrated nutrient management suitable varieties, ageing of orchard and tree replacement. HDP accommodates more number of trees per unit area ranging from 500-10,000 plants/ha depending on the type of fruit crop and the level of density such as medium high density 500-1500 plants/ha, optimum high density 1,500-10,000 plants/ha ultra-high density 10,000-1,00,000 plants/ha. High density orcharding is a highly technical entrepreneurship where nutrient management, irrigation and canopy management practices widely vary from traditional orchards hence growers must have full execution knowledge of this technology in present as well as future perspective. Post harvest, storage and marketing are closely associated with the success of HDP technology. Fruit yield increases 2 to 4 times vertically enhancing income of fruit growers.

Abstract

Seed priming is the innovative way of ensuring optimum germination and plant stand under moisture deficit situations. It enables the seed to tide over initial stress from biotic and abiotic factors. Higher yield with better quality seed are reported. The seeds of agronomic and horticultural crops are significantly affected by ageing and deterioration. Reversal or rejuvenation of aged seeds is therefore of primary interest. Experiments related to reversal of seed deterioration effects due to ageing relying heavily on accelerated ageing (AA) of seeds and their priming using various priming agents especially osmotic substances. Repair during germination is a hypothetical event supported by some investigators and questioned by others. Repair includes the spontaneous reorganization of plasma membrane phospholipids, which occurs during seed hydration. Alternatively or additionally, metabolic repair might occur. Experimental evidence for repair in imbibed seeds has been elusive. Priming reduced electrolyte leakage as well as lipid peroxidation in seeds implying the activation of membrane repair processes. Priming was also associated with increased levels of antioxidants like ascorbic acid and tocopherols particularly the latter and the activities of enzymes SOD, CAT POX involved in the mitigation of oxidative damage. In comparison with the priming of unaged seeds, the aged seeds experienced a diminution of response in terms of changes in the levels of antioxidants and scavenging enzymes. Thus, seed priming technique under climate extremities seems the best and economical means to sustain higher crop yields. The technique needs to be popularized among the farmers practicing agriculture and horticulture under rainfed situation so as to sustain production under climatic adversaries and enhance livelihood security and more profitability at the farm.

Abstract

Doubling the farmers’ income”, implies a 100 per cent growth of the current level of income of the farmers within a specific time frame, through multifaceted efforts of technological advancements in agriculture, policy formulation/ implementation, and efficient market system. The idea of doubling the farmers’ income during seven year period has by many experts been deemed impractical owing to the fact that a consistent annual growth rate of 14.86 per cent would be required in agricultural sector to double its GDP which has never had any history in the Indian agriculture. Some experts point out the possibility of success through appropriate technological intervention and viable government policies specific for each of the agro ecological zones of the nation. Increase in the farmer’s income doesn’t imply increase in nominal income through excessive production, but increase in real income, taking inflation into account. Production technologies, their use and impact are important factors to focus on doubling the farmers’ income. These technologies are already available across all the regions of the country but their adoption remains a problem to discuss always and partial adoption of the technological package can never be expected to get the desired results on ground. The results are suggestive of the pent up need to focus on the extension support on end-to-end approach from production to marketing with appropriate facilitation for inputs, insurance, credit, storage, marketing facilities etc. However, it would need involvement of all the stakeholders to come up on board to pursue this goal.

Abstract

Parasitic diseases are of great economic importance in livestock farming and are major obstacle in the health and productivity of animals. These may be due to endo-parasites that live inside the body or ecto-parasites such as ticks, mites, flies, fleas, midges, etc., which attack the body surface. Among ecto-parasites, ticks and mites are very important and harmful blood sucking external parasites of mammals. Blood sucking by large numbers of ticks causes reduction in body weight and anemia among domestic animals, while their bites also reduce the quality of hides. More than 250 species of mites can cause problems for humans and domestic animals because of their being vector for zoonotic diseases. Their attack may lead to problems of temporary irritation of the skin due to bites, persistent dermatitis due to mites invading skin or hair follicles, mite-induced allergies, transmission of pathogenic microbial agents, intermediate host of tapeworms, invading respiratory passages, ear canals and internal organs, fear of mites called acarophobia The economic or medical importance of the Acari increases with their ability to be vector for viruses, rickettsiae, spirochaetes, phytoplasmas, mycoplasmas and protozoa, or to harbor and transport nematodes, bacteria and fungi pathogens that affect plants, domestic and wild animals and humans. Ectoparasites were not considered serious problem till the introduction of exotic animals or exotic semen in India as the indigenous breeds were considered resistant to parasites and the damages occurred by them were totally ignored. Much awareness was not there about the diseases caused by ectoparasites like anaplasmosis therefore dairy producers had to bear losses both, in milk production and proper animal growth. Ectoparasites may be causing death of animals in certain cases. Losses in dairy, poultry, goatry and other livestock farming can be considerably reduced through strategic management of parasites. This needs timely detection, identification and development of effective control measures. 10-30% production losses are estimated by parasitic infestation. If profitability is the goal in livestock entrepreneurship then target has to be the animal health, productivity and quality produce through strategic management and awareness campaign on economic importance of parasites.

Abstract

Climate change is well acknowledged fact globally and in India has been witnessed with more frequent cloud bursts, highly variable frequency and distribution of rainfall, high seasonal thermal variations, receding glaciers and unstable agricultural production. Likely impact of climate change is expected to reduce agricultural productivity, production stability and incomes in some areas that already have high levels of food insecurity. However, Agriculture has the potential to retard the pace of climate change by capturing a significant part of the excess atmospheric carbon in the soil and plants in the form of organic matter and also competent to reduce emissions of nitrous oxide and methane if practiced in smart ways so developing climate-smart agriculture is thus crucial in achieving future food security and climate change goals. Transformations are needed in both commercial and subsistence agricultural systems, but with significant differences in priorities and capacity. Several climate smart agriculture practices such as cropping system improvement (e. g. crop rotation, diversification, improved varieties and integration of legumes), integrated nutrient management (e.g. green manure, compost and site specific nutrient management), resource conservation (e.g. minimum/zero tillage, keeping the land consistently covered with crop residues), precision water management (e.g. planting crops in bed, laser land leveling, mulching with crop residues) and agro-forestry have been proposed for adaptation to climate change and variability. However, their adoption decisions by the farmers are largely dependent on economic benefits associated with the interventions. It should be clearly understood that climate smart agriculture does not make use of different practices but certainly it uses them differently.

Abstract

ICT is contributing in every sphere of human society and agriculture cannot be an exception. It can bring revolutionary changes in farmers’ life by improving accessibility to information and knowledge. Farmers certainly feel empowered and with confidence can opt for innovative approaches in business farming. Nearly 70 percent of the bottom fifth of the population in developing countries own a mobile phone. The number of internet users has more than tripled in a decade, from 1 billion in 2005 to an estimated 3.2 billion at the end of 2015. Thus, ICTs provide faster and newer ways of delivering and accessing information to many and are potential tools for poverty alleviation, health, education, judiciary, agricultural marketing and sustainable development. As per an ICAR report 80 per cent of the technologies generated by the researchers in agricultural sector are either not transferred to the ultimate users or they do not find applicability in the farmer’s field. Out of the remaining 20 per cent of the technologies, around 50 per cent do not impress the farmers due to mainly its ineffective technology transfer that range from language to effective demonstration using the available tools. Information and communication technology revolution is the latest milestone in Indian agriculture that can usher an era of knowledge flow from institution to farmers field in much systematic and organized way and eliminate hurdles in technology transfer and adoption. From the perspective of agricultural knowledge and information systems (AKIS), ICTs can be seen as useful in improving linkages between the research, extension and the market sub systems. Real-time information and customized knowledge provided by ‘eChoupal’ enhance the ability of farmers to take decisions and align their farm output with market demand and secure quality and productivity. The eKrishi project, Market driven Agricultural Initiative through IT enabled Agri-business Centres in Kerala, addresses the existing gap in agriculture information flow and transaction management. The touch screen kiosk with information on cattle health was tried and tested under a United Kingdom Department of International Development (DFID) – Animal Health Program (AHP) supported project on dissemination of animal health knowledge for development of landless dairy cattle owners in the peri-urban regions of Pondicherry. Being a global resource, and with billions of users, the Internet requires some degree of international cooperation on technical matters as well as on standards and norms that can ensure that it remains a global public good, facilitating information flows and contributing towards sustainable development.

Abstract

The global economic burden due to zoonotic diseases is very high. According to a recent World Bank estimate, the economic burden due to six of the zoonotic diseases that have occurred in specific countries between 1997 and 2009 is estimated to be US$80 billion. In a worst-case scenario, potential losses from a pandemic influenza outbreak could be US$3 trillion, which is equivalent to 5% of the global GDP. Zoonotic diseases continue to represent an important health hazard in most parts of the world. More than 200 zoonotic diseases have been described, caused by bacteria, parasites, viruses, fungi and unconventional agents (e.g. prions). About 75 percent of the new diseases that have affected humans over the past ten years are caused by pathogens originating from animals or from products of animal origin. Many of these diseases have the potential to spread by various means over long distances and to become global problems. India contributes to substantial portion of the global burden of endemic zoonoses and is one of the several ‘EID hotspots’. The quality and safety of food supplies are put at risk by demands for more, cheaper food, driven by growing population and increasing urbanization, combined with a lack of resources to deal with issues related to food safety and lower or less rigorously enforced regulatory standards add to spread of zoonotic diseases. Human and financial resources that are dedicated by national authorities to the support of regulatory and non-regulatory food safety programs generally fall well short of needs. Commonly, many of the resources available are used for quality control of food for export, rather than products for domestic consumption, leaving the domestic market more vulnerable to unacceptable levels of food safety hazards, thus adding to the problem. In many developing countries, there is a substantial informal market that generally escapes any food safety controls. The successful control of zoonoses is possible if acceptable standards of life and social welfare are observed in developing country like India. Close cooperation and interaction between veterinarians, health physicians and public health operators, agriculturists and ecologists is thus necessary via one health approach strategy facilitating interdisciplinary collaborations and communications in all aspects of health care for humans, animals and the environment.

Abstract

Indian agriculture is undergoing rapid transformation and agricultural-based food industry in India requires timely and adequate supply of good quality raw material for processing, value addition and export. The recent growth and diversification of consumer demand and the expansion of organized agricultural processing and marketing ventures in India has the potential to boost the market opportunities, productivity, and incomes of farmers, including that of marginal and small holders. However, achieving these goals will likely require creation of new institutions and innovations to develop supply chains and facilitate linkages between farmers, wholesalers, processors, and retailers. Among these institutions and innovations are various models of contract farming, including those led by cooperatives, by farmer groups, and by various types of private sector resource intermediation that develop backward linkages to growers. Contract farming is a system where agricultural production is carried out according to an agreement between a buyer and farmers, which establishes conditions for the production and marketing of a farm product or products. In other words Contract Farming is a system of production and supply of agricultural/horticultural produce under forward contracts between producers/ suppliers and buyers. The essence of such an arrangement is the commitment of the producer to provide an agricultural commodity of a certain type, at a time and a price, and in a quantity required by a known and committed buyer. Well-managed contract farming is an effective approach to help solve many of the market linkage and access problems of small and marginal farmers which constitute 86% of the farming households in India. This chapter examines growth and status including the performance of different models of contract farming based on empirical studies. It concludes that by entering into the contractual arrangement, the income level of the farmer and employment level in the rural economy has increased despite certain problems faced by the farmers like delayed payment, delay in procurement and low supply of agricultural inputs to them.

Abstract

With its core intention to raise economic status of farmers, Govt of India vows for transformation in agriculture and sets goal to double farmers’ income by 2022. Nonetheless, net income increase at the farm is amalgamation of technologies, tactics and government policies. Farmers realized 3-4 times increment in their profit during era of green revolution when high yielding varieties and chemical fertilizers were introduced in early seventies. Subsequently income enhancement of the farmers continued through raising of farm productivity per unit area and entrepreneurship. Thus Indian agriculture experienced transformation through chemical fertilizers, high yielding varieties, synthetic pesticides, off-season cultivation, high yielding breeds, export orientation and entrepreneurship development in food processing, mushroom production, dairying and poultry. With the result, India emerged as top producer of milk, millets, pomegranate, banana, mango, jute, pulses, okra, safflower etc and second top producer of wheat, rice, tea, tomato, potato, onion etc and third in egg production and fourth in poultry meat. Consequence was evolution of commercial farming from subsistence farming. In era of globalization and increased purchase power of consumers, profitability at the farm has become subject of competitiveness, quality and consumer preference. Price shoot-up and market crashing of commodities in the country has made agriculture, a profession of risk, uncertainties and unpredictability. It has thus, lost creditability of socioeconomic security. To make it remunerative and attractive, a combo plan of transformational technologies that has the competence to break production and productivity barriers and can also address market needs as well as consumer preferences is highly wanted. There is urgent need to infuse characteristic of market orientation in agriculture through marketing information system and promoting demand driven production system with focus on zonalization of crops taking advantage of niche area or geographical indications. Commodity supply must remain high through promotion of climate resilient varieties or breeds, mechanization, adoption of hi-tech crop and livestock management practices. All this has to be made sustainable by way of produce and product diversification through integrated farming system, organic agriculture and secondary agriculture. Considering future vision, research initiatives must continue on noble areas like vertical farming and in vitro farming. Information and communication technologies will open avenue for assured marketing by linking production to consumption system via proper marketing and distribution leading to increased farm profitability. This as a whole will make transformation in agriculture a reality.

Abstract

Indian agriculture witnessed a transformation in early seventies with green revolution in cereals. The Green Revolution resulted in a record grain output of 131 million tons in 1978-79. Yield per unit of farmland improved by more than 30 per cent between 1947 and 1979. This was because of introduction of high yielding varieties and use of agro-chemicals, particularly synthetic fertilizers. Farmers realized 3-4 times increment in their profit when high yielding varieties and chemical fertilizers were used in integration. Agriculture is the primary source of livelihood for about 58 per cent of India’s population. Gross Value Added by agriculture, forestry and fishing is estimated at Rs 17.67 trillion (US$ 274.23 billion) in FY18. The Indian food industry is poised for huge growth, increasing its contribution to world food trade every year due to its immense potential for value addition, particularly within the food processing industry. Food & Grocery retail market in India was worth US$ 380 billion in 2017, is the world’s sixth largest, with retail contributing 70 per cent of the sales. The Indian food processing industry accounts for 32 per cent of the country’s total food market, one of the largest industries in India and is ranked fifth in terms of production, consumption, export and expected growth. It contributes around 8.80 and 8.39 per cent of Gross Value Added (GVA) in Manufacturing and Agriculture respectively, 13 per cent of India’s exports and six per cent of total industrial investment. During 2017-18, food grain production is estimated at 279.51 million tons, with rice and wheat production in the country at 111.52 MT and 98.61 MT, respectively in the same period. Milk production stands at 165.4 million tons during FY17, while meat production is 7.4 million tons. India is the second largest fruit producer in the world. Production of horticulture crops is estimated at record 307.16 million tons (mt) in 2017-18 as per second advance estimates. Total agricultural exports from India grew at a CAGR of 16.45 per cent over FY10-18 to reach US$ 38.21 billion in FY18. In April-May 2018 agriculture exports were US$ 6.43 billion. India is the largest producer, consumer and exporter of spices and spice products. Spice exports from India reached US$ 3.1 billion in 2017-18. Tea exports from India reached a 36 year high of 240.68 million kgs in CY 2017 while coffee exports reached record 395,000 tons in 2017-18.

Abstract

India today has 1.30 billion people and would be the world’s most populous country by 2025. The challenge is how to feed India’s growing population with rising income, but limited land and water resources. Whereas area under crop cultivation has come down from 142 million ha to 138 million ha, asking for protecting the arable lands from mass urbanization and more productivity per unit area. The agricultural production systems are still operating at low productivity and high uncertainty in the country. There is little or no alignment between production, the growth of agricultural commodities in the market and the supply of these commodities. All this leading to considerable farm produce wastage, mounting tremendous pressure on natural resources and would pose a challenge to the country in providing food, water, health, shelter, sanitation and jobs to all.

While industry and services have grown, agricultural sector has lagged behind. Information technology sector is growing consistently at 30 per cent every year but agriculture has not even achieved 4 per cent growth. The contribution of agricultural sector to national Gross Domestic Product (GDP) has continued to decline over the years; has shrunk from 55 per cent in 1951-52 to 14.6 per cent in 2015-16. Land fragmentation, reducing holding size, obscure marketing prospects, low water and inputs use efficiencies, modest level of mechanization, unorganization, unreliable returns from rainfed areas, inadequate storage infrastructure, weak processing sector and meagre investments continue to leave visible impressions on Indian agriculture. Nonetheless, agriculture remains a major source of employment, absorbing about 52 per cent of the total national workforce. Higher levels of investments in agriculture, both by the public and private sector can yield much better results if the reforms are undertaken to streamline not only the incentive structures for the farmers, but also the institutional framework to address the issues of integration, export orientation, infrastructure development, and information technology and management to achieve the objective of a innovative agricultural sector capable of providing food security to all. Farmer insecurity about crop failure also prevents them from adopting changes. A balance between risk and reward is considered to be an important economic factor for enhancing relationships. Trust among channel partners, power share and interdependence are other important factors for enhancing relationships in the supply chain system.

8.1. Vegetables

8.1.1. Tomato (Lycopsarsicon Esculentum)

Temperature: A warm climate crop can tolerate high temperature but cannot withstand frost. Minimum temperature for germination of seed is 8 to 10°C. Night temperature for fruit setting is 12 to 22°C. Critical night temperature for fruit setting is below 12°C. Critical day temperature for fruit setting is above 32°C. If the greenhouse can maintain the temperature as mentioned above then the non-terminal or indeterminate tomato crop can be grown for 10 to 12 month duration.

Variety: Indeterminate (producing flowers and fruits continuously along the stem as it grows) hybrid varieties resistant to nematodes or fusarium or verticilium wilt disease may be selected.

7.1. Introduction

Cultivation of crop is one of the most important aspects on which the success of a greenhouse depends. Principally it is similar to that of open field cultivation; but it is a completely different proposition in comparison. In greenhouse it needs (1) high precision technology, (2) special management, and (3) high qualityinputs. A special crop husbandry is extremely necessary, integrating all these three aspects, for successful greenhouse cultivation.

Why special crop husbandry? – Ancestors of each and every crop of modern time once grew out of its own in wild, without any human intervention. Gradually it has been domesticated or brought under cultivation by progressive alteration of its natural growing and reproduction process. Even the genetic nature also altered gradually. Till recent past these development of domestication process has been restricted principally on reproduction, planting, nutrient supply, water supply, and plant protection aspects. Interestingly most of these aspects are still very much supplementary in nature, as a good percent of it is still dependent on nature and its growing system.Actually, we cannot confer any significant change, physically or genetically, in their adaptation against the natural elements like rain, sunlight, temperature, humidity, gas supply, etc. However, we try our level best with a compromising note on local climate.

Hence there is ample scope to go for complete alteration of their growing habit/ practices in relation to each and every aspect of the climatic elements. It is a very difficult job, because, for a small change in any individual aspect of plant growth, all the other aspects are affected. Thus, one has to make a proper and holistic balance of alteration of all the growth aspects for each and every individual domesticated plant, we call as crop.

The greenhouse technology is all about the controlling of ambient climatic factors to create a favourable ‘micro-climate’ for the crop growth. The magnitude of such control may differ from minimal to maximum. It may control single (like rain) to multiple aspects (like rain, temperature, humidity, sun-light, wind, carbon-di-oxide, etc in combination). It can simply be done by manipulating natural factors using the suitable/appropriate design of the greenhouse or can be done in complex form by using/installing different devices and packages (may be software) with necessary automation in a specifically designed greenhouse.

It is a vast subject and very difficult to have a thumb-rule for such climate control mechanism due to seasonal climatic variations and most importantly due to the inter-relation effect between each and every climatic factors. Thus, it should be given sufficient space to maneuver the mechanism designed for a specific greenhouse targeting a specific crop.

Ways to control these climatic factors in a greenhouse

There are two basic ways to control the climate inside greenhouse.

Primarily, through a suitable design of the greenhouse itself, the inside microclimate can be controlled, obviously up to a certain level. Through manipulation of the design, particularly the naturally ventilated system, the rain water, temperature, humidity, CO_2, wind, etc can be controlled up to a certain level in favour of the crop.

Secondarily, by introducing equipments, tools, devices, etc we can control the micro-climate of a greenhouse. In most cases, it can take care of a number of climatic factors, like temperature and humidity, sun-light and temperature, etc simultaneously to provide a crop-wise micro-climate inside.

Frequently we use both the basic controlling methods, in combination, to achieve the required climate control system in a particular greenhouse.

We have already discussed about the different climatic factors that affect the crop micro-climate. Now we will discuss the basic control mechanism of each and every climatic factors and the related technology that can be utilized for greenhouse.

5.1. Introduction

Back drop: Since the concept of greenhouse technology was introduced, metal and wooden structures were tried in different parts of the world. When greenhouse was brought in the tropical and sub-tropical areas, people tried bamboo as construction material for greenhouse instead of iron or wood. However, due to the non-standard character of bamboo, the standardization of design of bamboo greenhouse, as a model, was not possible. Actually all such designs were very much clumsy and not at all comparable to the well established models of greenhouse having metal or wood frame.

Hence it is an urgent call to establish a standard design of bamboo greenhouse that can efficiently compete with the other common & commercial greenhouses made-up of GI-pipes.

Innovation: This greenhouse is structured by matured, cured & treated bamboo instead of usual structural elements (GI/MS/wood). For that matter (1) innovated design and construction methods and (2) a new curing method has been generated. It is very tough to standardize the design of bamboo greenhouses, specifically due to the non-standardized nature of bamboo. Unlike GI/MS pipe etc, bamboos do not have the same dimensions and uniformity in size & shape (diameter/ width/thickness etc). Thus, in general, bamboo greenhouses are low in height and are of naturally ventilated type. However, there is still huge scope to work on design of bamboo greenhouse for different climatic situation to avail the benefits of its natural advantages and low cost.

Design and Construction of a greenhouse involves five distinctly different aspects viz. (a) Basic form or type, (b) structure/designs, (c) covering materials and its fixing, (d) foundation and constructional detail, and (e) crop-support, irrigation and drainage planning.

All the above aspects are interlinked. To have a clear idea, these individual aspects are discussed separately.

4.1. Basic Forms of Greenhouse

Before considering anything about construction, one should finalize the form of construction. There are different forms of greenhouses for different climatic and crop situations. These types of structures are planned according to the requirement of farmer/promoter and obviously according to the purpose. Now we will describe, in brief, some of the important form or type of greenhouses.

4.1.1. Greenhouse covered with transparent and impervious material

These structures are covered with water/rain impermeable transparent materials which allow necessary solar radiation for optimal growth of plants. Simultaneously it protects crops from temperature-fluctuation, rain, wind, and creates a favourable situation in respect of CO₂ and humidity. This covering is also used to prevent the re-radiation of heat energy and conserve the heat generated in daytime to raise night temperature inside.

3.1. Non-Climatic Factors

Apart from climate several other non-climatic factors has to be considered before selection of proper greenhouse technology, which are listed in the following text.

1. Location and selection of site: The ideal location for greenhouse cultivation is an area having moderate climate with high sunlight, low humidity and good natural drainage. It is better to avoid storm prone areas or it is a must to take necessary protection, like wind-break and shelter belt, in such areas. However, selection of site, where the greenhouse will be constructed, is the first consideration to select the proper greenhouse technology. The proper selection of site will also depend upon various non-technical factors, which are listed below.

2.1. What is Greenhouse Technology?

Greenhouse technology involves primarily the structural design that can take care of climate control mechanisms to create proper micro-crop-climate and secondarily it involves the technology needed for optimum growth and production of crop grown under this structure. Combination of these two aspects may be expressed as ‘greenhouse technology’.

So the ‘greenhouse technology’ may be defined as “The technology required to built a structure, covered fully, partly or porously for manipulating the inside climatic conditions, under which crops/plants can be grown with special measures”.

1.1. History of Cultivation

Prehistoric people lived as hunters and gatherers. About ten thousand years since now they unveiled the mystery of germination and engaged themselves in production of plant from seed. Since then it was practiced in the open field fully exposed to sun, rainfall, ambient temperature & humidity, etc. Gradually, with the development of society, they improved the package of practice and became accustomed to produce better crop in accordance with these natural conditions.

Backdrop of modern agriculture technology: Since the late 19^th century, population all over the world increased rapidly, which demanded more food production. This situation prompted crop production as a profitable business. New scientific inventions were incorporated in farming practices to increase the production per unit area (yield). On the other hand, repeated cultivation of same or similar crops in the same land, year after years, gradually reduced the productivity of soil. Hence, need arose for increase of crop yield through further improvement in farming technology.

First-phase development: The incorporation of ‘chemicals’ into the soil as plant nutrients(fertilizers) coupled with the use of ‘high-yielding varieties’ changed the scenario of crop production in the sixties of last century. This, along with ‘mechanization’, increased crop yield many-fold and helped to bring large areas under the plough. Countries, which developed these technologies, made good amount of money/profit from this development. Gradually, the rest of the world adopted or purchased these technologies particularly to meet up the rising demand of food in their respective country.

Subsequent problem: This systemof cultivation solvedthe food scarcity problem initially but use of chemicals, cultivation of similar crop over a large area etc. destroyed the agro- ecological balance. These technological developments, coupled with adoption of labour saving technologies, gradually created problems like gradual loss of soil health, lowering of nutrient-use-efficiency and subsequent yield. This invited severe attack of pests like insect, disease, weed and related social problem like unemployment.

Among abiotic stresses, low and high temperature stress is very critical for determining the agricultural production. Plants exhibit a maximum rate of growth and development at an optimum temperature or over a diurnal range of temperatures (Fitter and Hay, 1981). When ambient temperature deviates from optimal, physiological, biochemical, metabolic and molecular changes occur within plants. This is an effort of plants to maximize growth and developmental processes and to maintain cellular homeostasis during such adverse conditions. Under increasingly stressful conditions, plants experience progressively more abnormal, impaired or dysfunctional cellular and whole-plant processes until the cardinal temperatures for survival are reached (Fitter and Hay, 1981). At the extremes of the natural temperature range of a plant, the degree of physiological, cellular, metabolic and molecular dysfunction becomes so severe that it leads to death.

Growth constraints and stress result in significant crop losses and therefore the mechanisms underlying endurance and adaptation to these changes have long been the focus of intense research (Bray 2004). Kültz (2005) elaborated two types of responses to a particular kind of stress:

Vegetable crops, known as protective foods, are important for the healthy diet providing vitamins, minerals, fibre, amino acids and other bioactive compounds. Improvement in vegetable crops is inevitable for better yield, pest or disease resistance, morphological characters, nutritive quality, to adapt with environmental stress, climate change, offseason production, satisfying varying consumer preference etc. Vegetable crops comprise of a large number of species and are rich in diversity. Diverse genetic resources are pre-requisite for any crop improvement programme and vegetable improvement is carried out using exotic introductions, indigenous collection and hybrids/varieties by different breeding systems. Characterisation of genotypes is the description of germplasm giving information on heritable characters so that promising one can be utilised in breeding programme which is the best option for higher yield and other qualities. The morphological, physiological and molecular (biochemical and DNA) traits are called qualitative descriptor and yield, pest/disease resistance, stress tolerance etc are quantitative descriptors that are easily influenced by the environment factors. Apart from the higher production and resistance to biotic and abiotic factors, nutritional traits, flavour, processing qualities that increase the food value is also important in improvement programme of fruits as well as vegetables.

Genetic resources of vegetables available at international and national levels are characterised, evaluated and conserved. With the high diversity of vegetable crops, characterisation and evaluation of genetic resources become a stupendous responsibility requiring extensive infrastructure facilities and varying methods of evaluation (Srivastva, 2012). Genetic resources are characterised on highly heritable traits expressed across the environment. Apart from morphological characterisation, biochemical and molecular characterisation is also conducted that are useful for the identification of biotic and abiotic stress parameters, nutritional and processing quality. Genotype characterisation can be done efficiently using potential of biochemical and molecular markers that help to set up the breeding programme.

Genetic diversity is one of the fundamental character present in any population or species. It is the total variation either phenotypic or genotypic which have occured in a population through due course of evolution. Variation in any species depends on mutation, substitution (insertion/deletion) and response to selection. However, comprehensive studies on theoretical and empirical perspectives for diversity analysis may be found by evolutionary biologists to understand the factor that influences levels of genetic diversity in natural population (Lewontin, 1974). In brief, nucleotides/ protein codes are the basic unit to quantify total amount of variation. Bioinformatic tools and techniques help us to measure inferring relationships between genes, proteins or organisms through use of these DNA/protein sequences by integration of mathematical algorithms, statistical and computer databases.

Diversity analysis is popularly known as phylogenetic analysis in bioinformatic terms. The basic principle of phylogeny is analysis/alignment of characters; whether it is morphological or molecular data. For instance, in case of morphological data of a crop species, the leaf colour/stem colour/fruit colour/grain size etc. may be compared however sequence data is problem of interest for molecular phylogeny. The evolutionary history of any crop species/ organisms inferred from phylogeny analysis mostly depicted through treelike diagrams/ dendrograms. In this chapter, phylogenetic analysis based on only nucleotide/protein sequences are discussed. For analysis of phylogenetics, default assumptions (Baxevanis and Ouellette, 2006) are:

INTRODUCTION

Genetic engineering (GE) and genetically modified organisms (GMOs) provide powerful tools for sustainable development in agriculture, healthcare and many other industries. GMOs are those which were genetically engineered in a laboratory by incorporating a small foreign DNA fragment carrying a gene of interest into the native DNA of the organism. The foreign gene is attached with the necessary regulatory elements to help its expression in the new genetic environment. Genetically modified (GM) crops currently account for some 16 percent of the world’s land planted with soybean, maize, cotton and canola. The global demand for food is increasing because of the growing world population and decreasing arable land. At the same time food and agricultural systems have to respond to several changes such as increasing international competition, globalization and rising consumer demands for improved food quality, safety, health enhancement and convenience. Modern biotechnology involving the use of rDNA technology/genetic engineering has emerged as a powerful tool with many potential application for improving the quantity and quality of food supply. Foods derived from genetically modified crops, commonly referred to as genetically modified food and food ingredients have already become available worldwide with aim of enhancing productivity, decreasing the use of certain agricultural chemicals, modifying the inherent properties of crops, improving the nutritional value or even increasing shelf life. Results of DNA modification may not be limited only to the particular characteristics of the replaced gene. It is therefore important to ensure that when these organisms are released into nature they do not harm the environment or human health [EFSA, 2006]. Such concerns have led to broader interests in the theme of risk assessment in the release of GMOs. A cautious approach is necessary to assess environmental risks which may occur due to introduction of recombinant organisms in the natural environment [Johnson et al., 2007].

Intellectual property: It can be defined as creations of intellectual brain which has value, utility/application in the society and can be traded in commerce for economic benefits.

Significance of Intellectual Property: The significance of protection of Intellectual Property has been realized for wealth and value creation in a knowledge-based economy. The agricultural scientists are comparatively little aware of IPR issues because their primary mandate has always been the free delivery of technology to the end users particularly the farmers. After the implementation of TRIPS Agreement during 1995, the worldwide focus of scientists and planners was shifted on the development of time appropriate technologies, protection of inventions/ technologies and real time technology transfer through licensing for industrial and agricultural growth leading to overall economic development. Under the changing scenario of global trade, where national governments are entering into bilateral agreements for tackling IPR issues to promote trade, agricultural scientists must also look for managing their intellectual properties in tune with the existing IP legislation of the country.

The Indian centre of origin and diversity of cultivated plants represent an outstandingly rich reservoir of nature’s wealth of plant species which include a large number of economically important species including Vegetable Crops. Common vegetables like okra and brinjal are native to this region. Out of the recorded 110 genera and 640 species of cucurbits, 100 species representing 36 genera occur in India. Twenty of these species are endemic. Adoption of high yielding crop varieties and hybrids along with changing land use patterns have led to rapid replacement of native cultivars in most cases. Conserving and sustainable utilization of locally adapted types and primitive landraces are, hence, now major concerns at the national and global levels.

The National Bureau of Plant Genetic Resources (NBPGR) at New Delhi is the nodal organization in India with the national mandate to plan, conduct, promote and coordinate all activities concerning plant exploration and collection, germ plasm import and exchange, plant quarantine, germplasm multiplication and distribution, evaluation and characterization, documentation and conservation of both indigenous and introduced genetic variability in cultivated plants and their wild relatives.

The challenging job of collecting, genetic evaluation and utilization of plant genetic resources cannot be satisfactorily accomplished by one organization. The enormous task of safeguarding and promoting greater utilization of these valuable resources can be best achieved through a networking approach. Professional development is the key to success of this endeavour. NBPGR organizes regularly short-term training courses on various aspects of PGR to impart latest knowledge and techniques to scientists and technicians engaged in crop improvement programmes and handling germpalsm collections.

PLANT EXPLORATION AND GERMPLASM COLLECTION OF PLANT GENETIC RESOURCES

Plant exploration and collection activities have been undertaken for a wide range of needs - by naturalists, travelers and plant hunters over the past several centuries in the quest for new and better economic plants in the southeast Asian region, ornamentals in the Himalayas and many others; by taxonomists for working out plant diversity and delineating phyto- geographic differences, and providing a basis for pinpointing areas with high species diversity and changes over time; world-wide collection, augmentation and characterization of crop plant diversity by Vavilov and co-workers (1926) for understanding the patterns of crop plant diversity and delineating centres of diversity; search for wild forms of species, and wild relatives of crop plants for working out primary centres of origin and crop genepools; biosystematic study, survey and in situ study and collection in protected areas for determining patterns of diversity build-up in crop and wild species. Concept of centres of origin of crop plants, importance of the wild genepool of crops, dependence on wild plants as a source of edible and otherwise useful species ensuing from these efforts provide the basis for systematic exploration and collection of plant genetic resources.

Plant genetic resources represent both the basis for agricultural development and a reservoir of genetic adaptability that acts as a buffer against environmental changes. The erosion of these resources threatens world food security. From an agricultural utilitarian standpoint, plant genetic resources can be considered limited and perishable natural resources. PGR forms a distinct group and include all plant species, which contribute to people livelihoods by providing food, medicine, feed for domestic animals, fibres, clothing, shelter, energy and other uses and are subject to cultivation by man as well as the wild relatives of these species. Genetic diversity simply means all the variety of genes that exist in a particular variety or species. They provide the raw material (genes) which, when used and combined in the right way, produce new and better plant varieties, and are an irreplaceable source of such characteristics as resistance to disease, local adaptation, and productivity. Plant genetic resources are now, and will continue to be in the future, of inestimable value independently of whether scientists use them by means of conventional plant breeding or modern genetic engineering. These genes are dispersed throughout local cultivars and natural plant populations that have been selected over thousands of years by farmers and nature for their characteristics of adaptation, resistance and/or productivity. The road to a continuous increase in the production and quality of food lies through the protection and efficient utilization of plant genetic resources; this requires their conservation, evaluation, documentation and exchange.

Plant biodiversity is the single greatest resource that man garnered from nature during the long cultural development phase. More than 2.5 lakh species of mosses, ferns, conifers and flowering plants and more than 50,000 plant species are yet to be documented, primarily in the remote and less studied reaches of tropical forests.

Vegetable crops in which rich diversity occurs in India are Cowpea, Common bean, Cole crops, Okra, Brinjal, Sweet potato, Taros, Yams, Sword bean, Velvet bean and Elephant foot yam. Wide diversity was observed in chives, leeks and other Allium spp in Kumaoun and Garhwal Himalayas; cluster bean in Western arid zone; lab lab bean in Deccan plateau; cucurbits in Rajasthan and Madhya Pradesh and leaf vegetables like Amaranth and Fagopyrum in Western Himalayan region. Tropical vegetables consist of solanaceus fruits (tomato, hot pepper, brinjal), cucurbits (water melon, muskmelon, cucumber, pumpkins and squashes, bottle gourd, chow-chow, ivy gourd, bitter gourd, ash gourd, round gourd, snake gourd, pointed gourd, sponge gourd, ridge gourd), malvaceous vegetables (Okra),legumes (common bean, lima bean, dolichos bean, cowpea, sword bean, winged bean), allium (onion, shallot, garlic, leek) and leaf vegetables (amaranth, spinach beet, Ceylon spinach). The indigenous vegetables both cultivated and wild have important role in household nutrition, economy and food security. There are 25 hot spots of biodiversity of which Western Ghats and Eastern Himalayan region are the most important ones. Indo-Myanmar region is one of the largest hot spots of the world and is the centre of origin of tuber crops like yams, taro, Amorphophallus and Alocasia. Tropical tuber crops form an important group of subsistence crops especially to those living in tropics and sub tropical zones. Tuber crops are the third important food crops after cereals and grain legumes. Major tuber crops are cassava, sweet potato, Asiatic yam, African yam, lesser yam, elephant foot yam, taro, tannia and country potato. Minor tuber crops are arrowroot, winged bean, yam bean, canna, safed musli and Jerusalem artichoke. Sweet potato is one of the world’s highest yielding crops.

Biodiversity is the origin of all species of crops and domesticated and the variety within them. It is also the foundation of ecosystem services essential to sustain agriculture and human well-being. Today’s crop and livestock biodiversity are the result of many thousands years of human intervention. The biodiversity in vegetable crops is composed by the genetic diversity, as species diversity (inter specific diversity) and as diversity of genes within a species (intra specific diversity) referring to the vegetable grown varieties, and by the diversity of agro-ecosystems (agro-biodiversity).

Crop diversity is the variance in genetic and phenotypic characteristics of plants used in agriculture. Over the past 50 years, there has been a major decline in two components of crop diversity; genetic diversity within each crop and the number of species commonly grown.

8.1 Introduction

There are many theories that deal with the generation of innovations, their diffusion and adoption or non-adoption by the end users. Such theories include actor-network theory, knowledge systems and network theory, strategic niche management theory and adoption and diffusion of innovations theory (Rogers and Shoemaker, 1971; Rogers, 1983, 1993, 2003). Among the different theories, the diffusion and adoption theory has achieved a prominent position in the field of anthropology, sociology, public health, medical sociology, communication, marketing and management, economics, public administration, industrial engineering, geography and many other disciplines all over the world for more than half a century. The main elements of diffusion of innovation as identified by Rogers (1962) are: i) An innovation, ii) Communication channels, iii) Time and iv) Social system. This shows that diffusion of any innovation will take place only if a new idea or practice exists which is accepted by an individual or a group of people over a period of time. The rate of diffusion depends upon the availability of communication channels and structure of the social system. But, in 1966, Fliegal and Kivlin complained that the diffusion of innovation has the status of a basted child with respect to parent’s interest in social and cultural change: Too big to ignore but unlikely to give full recognition.

The sustainable agricultural practices include integrated pest management (IPM), integrated nutrient management (INM), soil conservation and water management. However, there is not a single technological innovation were the innovator/company that commercializes a technology is not interested whether it is adopted/purchased by the consumer.

7.1 Introduction

In this chapter, process, outcome and impact evaluation of the vegetable integrated pest management programme (IPM) implemented in the subtropical area of the Jammu region of Jammu and Kashmir (J&K) state during 2008-09 and 2009-10 was studied. There are many research designs employed for impact evaluation. These include one group before and after comparison design, one group time-series design, non-equivalent control group design and ex-post facto research design. Social scientists most often used before and after IPM (longitudinal) comparisons, with and without IPM, and control group (latitudinal) comparisons, and a combination of the two (longitudinal and latitudinal). A robust measure of the impact of a programme, however, is the difference-in-differences (Ashenfelter and Card, 1985) quasi-experimental design, a statistical technique used in econometrics and quantitative sociology to determine the difference between the treatment (with) and control group (without) over time. The difference-in-differences quasi-experimental design, also called double difference (DD), used to compare the treatment (with IPM) and control group (without IPM) over time. The objective of our quasi-experimental empirical study was to determine the impact of the vegetable IPM programme on the adoption of non-chemical pest management practices, pesticide use, and field use environmental impact in the sub-tropical region of the J&K state. Difference-in-difference quasi-experimental control group design (with/without, before/after) was used to compare the changes before and after the IPM programme between the IPM trained farmers and the non-IPM farmers. The DD model was employed to identify the impact of the IPM programme on the adoption of non-pesticide IPM practices, pesticide use by weight (a.i.), pesticide use frequency, farmers’ knowledge regarding safe use and handling of the pesticides, and field use environmental impact to address the bias introduced by a non-random sampling procedure as the farmers from FFS were selected intentionally (Table 1). The DD model also eliminated the in-built, systematic or seasonal effects other than the training effect.

6.1 Introduction

This chapter presents the impact evaluation (summative) of the vegetable IPM programme that was conducted by the Central Integrated Pest Management Centre (CIPMC) Jammu in the sub-tropical areas of Jammu, Samba and Kathua districts. These districts were selected purposively as the maximum numbers of IPM-FFS were conducted by CIPMC in these three districts. Ex-post facto research design (with/without) was employed for conducting the impact evaluation of vegetable IPM-FFS programmes conducted between 2003-04 and 2007-08. This design uses a pre-existing situation as the treatment instead of actual manipulation of the variables. An ex post facto study uses a comparable site as the control to find the programme effects.

An Ex-post facto research is a systematic empirical inquiry in which the scientist does not have direct control of independent variables because their manifestations have already occurred or because they are inherently not manipulated. Inferences about relations among variables are made, without direct intervention, from co commitment variation of independent and dependent variables. This kind of research is based on a scientific and analytical examination of dependent and independent variables. Independent variables are studied in retrospect for seeking possible and plausible relations and the likely effects that the changes in independent variables produce on a single or a set of dependent variables. The ex-post facto design was also used by Peshin and Kalra (1998); Reddy (2006); Maraddi et al., (2007) while evaluating the IPM programmes. The indicators for evaluation of the IPM-FFS programme were selected based on the requirements of the research design.

5.1 Introduction

A theoretical system is what we construct in one mind’s eye to model the empirical system. Theories and models provide the researcher concepts, definitions’, variables and hypothesis that may be tested by analyzing relevant data (Bhatia, 1990). A theory emerges from the research and so does a particular research pursuit from the theory. The theory is a set of interrelated constructs, definitions and propositions that present a systematic view of phenomena by specifying relations among variables, with the purpose of explanation and predicting the phenomena (Kerlinger,1973). A researcher seldom conducts research without any concern for theory. A theory provides major orientation to research by helping to define the type of data to be collected and theory emerges from facts (data) collected during research. Theory and facts are not opposed but intervened, the theory is not speculation and scientists are concerned with theory as well as facts (Anonymous, 2011). It is possible to conduct evaluation without paying any attention to theory and forms of evaluation, but such evaluation studies lack internal validity because these are not based on the rigorous evaluation research methodologies (Campbell and Stanlay,1966). According to Alkin and Christie (2004), evaluation has grown on three pillars of orientation i.e. research orientation, decision making orientation and assessing worth. The field of evaluation research can be defined as “the use of scientific methods to measure the implementation and outcome of programmes for decision-making purposes” (Rutman, 1984). The concept of evaluation research has been an issue of debate among academicians. The academicians consider that evaluation research differs from both basic research as well as applied research (Douglah, 1998).

4.1 Introduction

There is no widely accepted methodology for evaluation of IPM programmes. It would be fair to say that commonly accepted methodology for evaluation of the IPM programmes is still under development. Three international workshops supported by the Global IPM Facility were held to discuss and review progress in the development of methodologies and guidelines for the evaluation of IPM, particularly of those programmes/projects using the FFS approach (van den Berg and Jiggins, 2007). The need to combine economic and social science approaches was identified by the participants as a major challenge (Waibel et al., 1999). The recommendations of these workshops are:

“Firstly, the methods of impact assessment and evaluation presented by experts from different fields revealed that despite for the many definitions’ about IPM, there was broad consensus that IPM is about avoiding pesticides dependence and about achieving a socially defined level of pesticide use even though there are many types of IPM intervention. They range from ordinary farmer training to sophisticated ‘Farmer Field School’ approaches. Effective communicated research results that challenge existing paradigms and case studies that draw the attention of politicians and civil society can be subsumed under IPM intervention.

Secondly, need for a document that outlines good practices for IPM evaluation is urgent, because of the diversity of IPM intervention that already exist and that can be further expected. Virtually all groups involved in crop protection, including the chemical companies, label their own concept of IPM as it is a free good that can be taken, reproduced and modified by anyone. Hence, IPM can only be measured by its results and no longer by its inputs.

Thirdly, the different groups who participated in the workshop advocated different approaches to evaluation. There were those who see cost-benefit analysis (CAB) as the major tool of evaluation and wanted to refine this tool by adding economic evaluation of environmental impacts and by applying contingent valuation methods and willingness to pay concepts. Others believe that evaluation should not be a checking procedure but should be designed in the spirit of a joint learning experience. Thus, there was a difference of opinion among the economists on the one hand and anthropologists’ and extension specialists on the other hand. But, lastly, it was concluded that there is a need to set standards which must be met if CBA is going to provide the information that facilitates decision-making.

3.1 Introduction

Diffusion is a broader term, which encompasses unplanned as well as planned and directed spread of an innovation. In this chapter, the emphasis is on dissemination of integrated pest management (IPM) technologies. A wide variety of methods and media are being used for delivering IPM technologies depending upon the type of information and the stage of implementation (Whalon et al., 1982). The mass media methods such as print and electronic media are useful for creating awareness rather than directly assisting the farmer to use IPM technology (Lumber et al., 1985). Mass media methods are less intense methods than face to face method namely farmer field school.

3.2 Methods Used for Dissemination of IPM Technologies

Different methods used for dissemination of IPM technologies include the use of mass media including electronic and print media, field days, extension visits, video movies, plant clinics, IPM clubs, picture songs, IPM websites farmer field school etc.

2.1 Introduction

India is the second largest vegetables producing country next to China. Vegetable crops are grown on an area of 7.2 million hectares (Mha) with an annual production of 113.5 million tonnes (mt) in the year 2005-06 (Rai, 2007). The extent of crop losses in vegetable crops variety with the crop type, location, damage potential of the insect pests involved and cropping season. As vegetables are perishable items and are more prone to pest attacks, and at a conservative estimate, insect pests cause about 35-40 percent losses (Sardana et al., 2005). The major vegetables cultivated by farmers were cauliflower (Brassica oleracea var. botrytis L.), cabbage (Brassica oleracea var. capitata L.), and okra (Abelmoschus esculentus L. (Moench)). The chief pests of the cauliflower and cabbage crops were the tobacco caterpillar (Spodoptera litura Fab.), diamondback moth (Plutella xylostella L.), cabbage butterfly (Pieris brassicae L.), cabbage borer (Hellula undalis Fab.) and aphids (Brevicoryne brassicae L.). In the okra crop, the shoot and fruit borer (Earias vitella Fab.), jassids/leafhoppers (Amrasca bigutulla bigutulla Ishida) whiteflies (Bemisia tabaci Gennadius) and fruit borer (Helicoverpa armigera Hübner) were the main pests. Yield losses due to diamondback moth (Plutella xylostella) 17-99 percent, cabbage butterfly (Pieris brassicae) 69 percent, and crucifer leaf webber (Crocidolomia binotalis) 28-51 percent, cabbage borer (Hellula undalis) 30-58 percent in cabbage/cauliflower. In Brinjal, 11-93 percent loss is caused by fruit and shoot borer (Leucinodes orbonalis). In okra, yield losses due to shoot and fruit borer (Earias vitella) is 23-54 percent, jassids/ leafhoppers (Amrasca bigutulla bigutulla) 54-66 percent, whiteflies (Bemisia tabaci) 54 percent and due to fruit borer (Helicoverpa armigera) yield loss is in the tune of 22 percent (Shanker et al. 2008). The management strategy for the insect pests and diseases remain largely confined to pesticides. The overemphasis on the use of chemical pesticides by the vegetable growers leads to the multitude of problems to human health and ecology.

1.1 Introduction

Over the centuries, farmers experimented and developed pest management practice to minimize the damage caused by pests. Paul Muller (1939) discovered insecticidal properties in DDT, which resulted in ushering the synthetic pesticide era. The period from the late 1940s through to 1960s has been called the ‘Dark Ages’ of pest control (Newsom, 1980). Calendar based pesticides schedules were developed by the scientists and disseminated to farmers by extension workers. During this period other control measures were not even considered for further research by the agriculture scientists. The intensification of agriculture with the excessive and indiscriminate use of synthetic pesticides (DDT) in the 1940s and 1950s resulted in dysfunctional consequences like the resurgence of target pests, the appearance of new pests, and the development of tolerance to individual pesticides in many species (van Emden, 2002). The period was dominated by the belief that the pesticide was the only solution to pest management. In the 1960s itself, a major change in thinking occurred following the realization that pesticides had serious limitations and in several cases produce undesirable consequences (Norris et al., 2002). A solution to the problem caused by indiscriminate use of insecticide began to be developed by the entomologists through integrated control practices (Zodoks and Schein 1979).

The science of agrometeorology has great practical utility in protection against, or avoidance of adverse climate risks of crop production. Agrometeorological information can be used in efficient land use planning, determining suitable crops for a region, risk analysis of climate hazards and profit calculations in farming, production and harvest forecasts, and in adoption of farming methods and choice of farm machinery. Meteorological instruments are the equipments used to sample the state of the atmosphere at a given time. Meteorology does not use much laboratory equipments but relies more on field-mode in situ observation and remote sensing equipments. Rain was one of the first weather parameter to be measured historically. Two other accurately measured weather-related variables are wind and humidity.

An agrometeorological observatory or station is a place where all the necessary instruments and structures are installed and maintained to observe and record the weather parameters at stipulated time interval.

Many aspects of the global climate are changing rapidly. Evidence for changes in the climate system abounds, from the top of the atmosphere to the depths of the oceans. The climate system is the highly complex system consisting of five major components; the atmosphere, the hydrosphere, the cryosphere, the land surface and the biosphere, and the interactions among them. The climate system evolves in time under the influence of its own internal dynamics and because of external forcings such as volcanic eruptions, solar variations and human-induced forcings such as the changing composition of the atmosphere and land-use.

The term ‘climate variability’ is often used to denote deviations of climatic statistics over a given period of time (e.g., a month, season or year) from the long-term statistics relating to the corresponding calendar period. In this sense, climate variability is measured by those deviations, which are usually termed anomalies.

‘Climate change’ refers to a statistically significant variation in either the mean state of the climate or in its variability, persisting for an extended period (typically decades or longer). Climate change may be due to natural internal processes or external forcings, or due to persistent anthropogenic changes in the composition of the atmosphere or in land use. The United Nation’s Framework Convention on Climate Change (UNFCCC) defines ‘climate change’ as ‘a change of climate behaviour which is attributed directly or indirectly to human activity that alters the composition of the global atmosphere and which is in addition to natural climate variability observed over comparable time periods’. The UNFCCC thus makes a distinction between ‘climate change’ attributable to human activities altering the atmospheric composition, and ‘climate variability’ attributable to natural causes. Climate change is a long-term shift in weather conditions measured by changes in temperature, precipitation, wind, snow cover, and other indicators. It can involve both changes in average conditions and changes in variability, including, for example, changes in extreme conditions.

A key difference between climate variability and change is in persistence of ‘anomalous’ conditions. In other words, events that are used to be rare occur more frequently, or vice versa. Occasionally, an event or sequence of events occurs that has never been recorded before, such as the exceptional tsunami in the Indian Ocean in 2004 or hurricane season in the Atlantic in 2005. Yet even that could be a part of natural climate variability. If such a season does not recur within the next 30 years, by looking back it could be called as an exceptional year, but not a ‘climate change’. Only a persistent series of unusual events taken in the context of regional climate parameters can suggest that a potential change in climate has occurred.

Weather forecasting is the application of science and technology to predict the state of the atmosphere for a given location. Weather forecasts are made by collecting quantitative data about the past and current state of the atmosphere on a given place and using scientific understanding of atmospheric processes to project how the atmosphere will evolve on that place. Weather warnings are important forecasts because they are used to protect life and property. Forecasts based on temperature and precipitation is important to agriculture.

Agricultural production is highly dependent on weather, climate and water availability, and is adversely affected by weather and climate related disasters. In many developing countries where rainfed agriculture is the norm, a good rainy season means good crop production, enhanced food security and a healthy economy. Failure of rains and occurrence of natural disasters such as floods and droughts can lead to crop failures, food insecurity, famine, loss of property and life, mass migration, and negative national economic growth (Sivakumar, 2006).

Farming in many parts of the world, especially in the arid and semiarid regions is risky, because climate is highly variable. In some developing countries as much as 80% of the variability in agricultural production is due to the variability in weather conditions. This production variability in agriculture has immediate and important macroeconomic impacts. A timely seasonal forecast of favourable conditions could permit farmers to adjust cropping patterns and input use in order to benefit fully from these conditions. Also, a timely forecast could give the marketing system and downstream users, such as the food processing industry, time to prepare for a bountiful harvest (Arndt et al., 2000). It is important to remember that under rainfed conditions, even a less reliable, but earlier forecast may be more valuable than an accurate but late forecast (Mjelde et al., 1998).

Different crops are grown over a wide range of agroecosystems. Though the crops are raised in varied climates, ranging from very hot to very cold, and very wet to very dry, across temperate, tropical and semiarid zones, they are very sensitive to climate. The crop production is dependent on climatic parameters like rainfall, light, temperature, relative humidity and carbon dioxide concentration. Each kind of cultivated crop plants has its own optimum growth requirements. Breeding and selection of new cultivars have allowed for a greater adaptability to less favourable growing conditions than was possible in the past, but the inherent climatic requirements of a specific kind of crop have not changed materially.

CLIMATIC NORMALS FOR CROPS

Crop management is very much about managing climate risk so as to have financially viable and sustainable agricultural systems. Professor Henry Nix of the Australian National University posed three questions that need to be addressed when considering what crop can be grown where (Nix, 1981).

1. For any given crop which areas offer the greatest biophysical advantages?
2. For any given area which crops offer the greatest advantages?
3. For any given crop and area how much productivity be raised and sustained?

A weather hazard is an extreme weather event that threatens people or property. There are various weather hazards that affect agricultural productions. These hazards vary from one climatic zone to another and occur at different times, although some regions are more vulnerable to certain hazards than other. These weather hazards depend on the latitude of the place on the world map. These hazards affect crops and agricultural productivity negatively if they are not checked. Every agricultural zone has one particular hazard that is associated with it and in most cases affects the crop productions and reduces the annual crop yield. Weather hazards include cyclones, droughts, f loods, hailstorms, heat-waves and cold-waves.

The hazard is distinguished from an extreme event and a disaster. An extreme event is simply an unusual event; it does not necessarily cause harm. A disaster is an event that does cause harm in significant amounts. Weather hazards are often called as natural hazards. The natural hazards become natural disasters when people’s lives and livelihoods are destroyed.

Hydrologic hazards are the result of either excess or a severe lack of water, i.e., flood or drought. Hydrometeorological hazard is a process or phenomenon of atmospheric, hydrological or oceanographic nature that may cause loss of life, injury or other health impacts, property damage, loss of livelihoods and services, social and economic disruption, or environmental damage. Human and material losses caused by natural disasters are a major obstacle to sustainable development. By issuing accurate forecasts and warnings in a form that is readily understood and by educating people about how to prepare against such hazards, before they become disasters, lives and property can be protected.

The word ‘monsoon’ is derived from the Arabic word mawsim meaning season. The Arabs during their travel towards India recognised that by June strong southwesterly winds commence over the Arabian Sea and bring a lot of rains to the subcontinent. The term was first used in English in British India and neighbouring countries to refer to the big seasonal winds blowing from the Bay of Bengal and Arabian Sea in the southwest bringing heavy rainfall to the area. In the Indian subcontinent, monsoon is one of the oldest weather observations, an economically important weather pattern over June through September every year, and the most anticipated weather event and unique weather phenomenon. Due to its effects on agriculture, flora and fauna, and other economic, social, and environmental effects, a monsoon is keenly followed and studied. It has significant impact on the overall well-being of subcontinent residents.

The term ‘monsoon’ is customarily used in India to refer to the rainy season during the northern hemisphere summer from June to September and is traditionally defined as a seasonal reversing wind accompanied by corresponding changes in precipitation, but is now used to describe seasonal changes in atmospheric circulation and precipitation associated with the asymmetric heating of land and sea. Now the term monsoon has been broadened to include almost all of the phenomena associated with the annual weather cycle within the tropical and subtropical land regions of the earth.

Intergovernmental Panel on Climate Change (IPCC) describes monsoon as a tropical and subtropical seasonal reversal in both the surface winds and associated precipitation, caused by differential heating between a continental-scale land mass and the adjacent ocean. India Meteorological Department defines it as the seasonal reversals of the wind direction along the shores of the Indian Ocean, especially in the Arabian Sea, that blow from the southwest during one half of the year and from the northeast during the other half.

The definitions include major wind systems that change direction seasonally. The cyclic change of wind and rain can be separated into the summer monsoon period characterised by warm and humid southwest winds, and the winter monsoon period characterised by dry and cool northeast winds. In fact, monsoon systems are a major feature of the general circulation of the atmosphere in subtropical latitudes of most regions of the world.

Precipitation is water in liquid or solid forms, falling on to the earth. In other words, precipitation is the deposition of atmospheric moisture on earth. Formation of clouds does not mean precipitation. Precipitation involves condensation, growth of hygroscopic nuclei, cooling of nuclei at different stages and their fall on to the earth’s surface. There may be several clouds but no precipitation. If the cloud particles are too small and remain suspended in the sky, they may not fall on the earth. Under certain conditions, water particles formed tend to fall but do not reach the surface since they get evaporated on the way. Only when the cloud droplets or ice crystals grow to certain size and can no more remain floating due to buoyancy of air, do they fall as precipitation.

Precipitation is the major source of water to all the living organisms on the earth. All the water sources on the earth depend on precipitation only.

FORMS OF PRECIPITATION

Precipitation form is the state that the moisture is in, i.e., liquid, freezing, or frozen (solid). Different forms of precipitation may occur together, such as mixed rain and snow; but such an occurrence is simply a mixture of forms, not a separate form of precipitation. Because atmospheric conditions vary greatly both geographically and seasonally, several different forms of precipitation are possible. All forms of precipitation are collectively termed hydrometeors. Hydrometeors have been classified into 50 specific types. Out of these precipitation forms, only rain (liquid form) and snow (solid form) make significant contribution to total precipitation. In many parts of the world, the term rainfall is used interchangeably with precipitation.

Clouds are visible mass of little drops of water or frozen crystals suspended in the atmosphere above the surface of the earth. The World Meteorological Organisation defined cloud as a visible aggregate of minute particles of water or ice or both, in the free air. This aggregate may include larger particles of water or ice and particles such as those present in fumes, smoke or dust.

Clouds are the most important form of suspended water droplets caused by condensation. The typical size of these water droplets and ice crystals range from less than 1 µm to 50 µm. When surrounded by billions of other droplets or crystals, they become visible as clouds. In the atmosphere sufficient moisture is required to allow condensation to take place. Then, moisture needs a suitable surface upon which it can condense. In free air, condensation begins on hygroscopic nuclei such as aerosols. These are microscopic particles and include dust, smoke, salts and chemical compounds. Nuclei range in size from 0.001 µm radius to over 10 µm. On an average, oceanic air contains one million condensation nuclei per litre and land air holds some 5 or 6 millions. On hygroscopic particles such as sea salts, condensation can begin before the air is saturated. Supersaturation in clouds rarely exceeds one per cent. On average, clouds contain only four per cent of the total water in the atmosphere at any one time. Almost all clouds exist in the troposphere, although the tops of some severe thunderstorms occasionally extend to the stratosphere. Clouds move along with the wind and remain stationary in calm winds. They grow vertically and horizontally, depending on the temperature of the cloud and its ambient temperature. They may dissipate or precipitate. Under favourable atmospheric conditions, they burst and fall as rain. Clouds are essential to the earth-atmosphere system. They complete the following functions.

Water is the only substance that exists in the atmosphere in all the three phases, i.e., solid, liquid and gas. The moisture on the earth’s surface is in a constant phase change. The moisture content of the atmosphere is about 0.035% of all fresh water. The atmosphere receives its supply of moisture from the earth’s surface through evaporation from oceans, lakes, rivers, damp soil, etc. and through transpiration from vegetation. Water vapour is the gaseous state of water and is invisible.

The amount of water vapour present in the atmosphere is called atmospheric moisture or humidity. It is a measure of the amount of water vapour dissolved in the air, not including any liquid water or ice falling through the air. While humidity itself is a climate variable, it also interacts strongly with other climate variables. The humidity is affected by winds and by rainfall. Moisture content is determined by the local rate of evaporation, air temperature and the horizontal transport of moisture. Humidity indicates the likelihood of precipitation, dew or fog. It also plays a major role in the heat budget and the weather phenomenon of the atmosphere.

Temperature is the physical property of an object that quantitatively expresses the hotness or coldness. Objects of low temperature are cold, while various degrees of higher temperatures are referred to as warm or hot. When a heat transfer path between them is open, heat spontaneously flows from bodies of a higher temperature to bodies of lower temperature. If no net heat flow occurs between two objects, the objects have the same temperature which are then said to be in ‘thermal equilibrium’. Temperature plays an important role in all fields of natural and applied sciences. Most of the weather parameters are dependent on it, directly or indirectly. It has important role to play in the development and growth of all living organisms in all stages of their growth.

Atmosphere receives the heat energy from the sun and its temperature increases. Due to different amount of heat energy receipt at different places, the air temperatures at different places also vary. The variation in air temperature basically results into air motion, so as to equalise the energy content of the different regions of the earth. Thus, atmospheric temperature is one of the basic elements of weather and climate.