eChapters

Key Points

• It is frequently reported that metal, non-metal, and metalloid components cause toxicity in farm animals.

• The type of element causing toxicity affects both the treatment and the clinical indications of toxicity.

• The best course of action for managing toxicity is to treat symptoms f irst, then, if the causal toxin is known, use targeted antidotes.

Introduction

Animal diets contain a variety of environmental components, including metals and non-metals. Certain substances are necessary for the animal and only become poisonous when consumed in excess, while others simply endanger the animal's health. However, a number of variables, including the absorbed dose, the exposure route, the period of exposure (acute versus chronic), and others, affect how toxic the substance is, and these variables must be taken into account when diagnosing, treating, and managing clinical cases. Given the multitude of factors affecting these metals' toxicity. An attempt is made in this chapter to present a streamlined synopsis of the toxicity of metals, non-metals, and metalloid elements that are frequently encountered.

Calcification

Calcification is the deposition of calcium phosphates and calcium carbonates in soft tissues other than bones and teeth. It may be classified as dystrophic and metastatic calcification.

Dystrophic Calcification

Dystrophic calcification is characterized by the deposits of calcium salts in necrosed tissue of any organ (Fig 8.1).

Etiology /Occurrence

• Necrosis.

• Parasitic infections.

• Tuberculous lesions.

Drip system has great promise for efficient utilization of available irrigation water. In our country and elsewhere in the world the scientists are unanimously agreed to adopt drip irrigation method for higher application efficiency and thereby better use of scarce irrigation water. Saksena (1993) reported water losses of only 1-2% in drip irrigation in comparison to 6-9% in sprinkler and 30-35% in surface irrigation method. However, very small area compared to other methods of irrigation so far is irrigated by drip system in our country. Up to 2000 the total area under drip irrigation was 2,59,600 ha in India (Alam & Kumar, 2000). Initial high investment for drip network and pumping system, of course, are discouraging to the most of our farmers. Sharma & Abrol (1993) mentioned that in spite of the very encouraging results and attractive subsidies offered by the Govt. of India, the adoption of the drip irrigation system has not picked up to the expected level. Along with the other reasons they pointed out the high initial cost of the system and lack of research effort on developing cost-effective design suited to local condition are responsible for non-practice of drip irrigation at a considerable scale.

Some research works has been conducted to find out low cost method of drip irrigation. Biswas (1998) developed a manually operated drip irrigation system made of bamboo mains, laterals and sub-laterals. The system and its performance are described below.

Drip Network

The main and laterals of the drip network were made of hollow bamboo pieces each of 3m lengths with 7.5cm and 4.0cm diameter respectively. The sub lateral or the emitters were the bamboo twigs of 0.25cm inside diameter and 1.05-1.10m length to suit the spacing between the plant rows. The mains and laterals were made for the required length in the field by jointing together the sections one after another (Fig. 7.1). The ends of two sections, which contact each other, were made such that one section easily gets inside the other for about 10-15cm.

Madhya Pradesh has the highest population of Schedule tribes in India. With a population of 15,316,784, they occupy 21.1% of the state’s total population and 14.7% of the total tribal population of India. About 61% of the rural tribal population in Madhya Pradesh is living below the poverty line and is primarily relying on agriculture and allied industries for their livelihood (Planning Commission Report, 2010). But since the majority of them rely on unscientific subsistence farming, the income earned from such practices is very low. Apart from the higher poverty level, the nutrition levels in Madhya Pradesh also signify a grave situation. The state has one of the highest levels of anaemic children and women in India, and this incidence is highest in tribal regions of the state. The tribal regions of Madhya Pradesh have one of the highest percentages of malnourished children in India (UNICEF, 2019). The undernutrition and anaemia in tribes are primarily due to the lack of access to quality food. 

The central tendency measure is defined as the number used to represent the center or middle of a set of data values. The three commonly used measures of central tendency are the mean, median, and mode.

Measures of location (averages)

The term average refers to any one of several measures of the central tendency of a data set.

• The mean has the disadvantage that its value is influenced by outliers. An outlier is an observation whose value is highly inconsistent with the main body of the data. An outlier with an excessively large value will tend to increase the mean unduly, whilst a particularly small value will decrease it.

• The mean is an appropriate measure of central tendency if the distribution of the data is symmetrical.

The mean will be ‘pulled’ to the right (increased in value) if the distribution is skewed to the right, and ‘pulled’ to the left (decreased in value) if the distribution is skewed to the left.

The F-test for the equality of two variances

Rationale

The two-sample t-test and the analysis of variance make the assumption of homoscedasticity, i.e. of equal variances in groups of data. The F-test, often called the variance ratio test, may be used to investigate the homoscedasticity of two data sets.

We have to make a decision whether or not the population variances are likely to be different. This means that we need a cut-off for the variance ratio; if the variance ratio exceeds this cut-off value, we will conclude that the variances are unequal.

We determine this cut-off value formally, under the null hypothesis that the two population variances are equal, by referring the ratio to the table of the F-distribution. The degrees of freedom are (n1 – 1) in the numerator (the larger variance) and (n2 – 1) in the denominator (the smaller variance), where n1 and n2 represent the two sample sizes.

For the required significance level in a two-tailed test, therefore, we must halve this tail area. So, for a two-tailed test at the 5% level of significance, we have to relate the test statistic to P = 0.025. For convenience, we give the upper percentage points corresponding to P = 0.025 and P = 0.005 (relating to two tailed P-values of 0.05 and 0.01, respectively) in separate tables.

1. Aquaculture and Shrimp farming

Considering the current population explosion and the speed of human-centered land encroachment, scientists have expressed concern about the availability and production of food to meet global demand. The agricultural sector alone would not be able to cope with such a huge global demand of 7.6 billion people, which does not seem to be decreasing in any way. Approximately 20% of the global population consumes fish, which originate in the aquaculture sector. On the other hand, it has grown many fold with advancements in science and technologies in fish production and post-harvest, which has become a prominent commercial sector. The fisheries sector is broadly classified into two types: marine and inland. In marine fisheries, fishermen venture into the sea to fish with their fishing vessels and gear to harvest fish, whereas in inland f isheries, fishermen go fishing in rivers, lakes, and reservoirs. However, with advancements in technology and growing demand for fish as food sources, people have started growing fish in captivity under controlled and semi controlled conditions in ponds. The history of fish culture tracks back to 2000 BC, which originated in China, where they started growing carp in captivity by providing the required conditions for fish growth. Providing suitable conditions in captivity means providing the required physical and chemical environment in the culture system by keeping the physicochemical parameters at the optimum level as required by the species cultured. Physicochemical parameters of soil and water are key to the successful culture of fish, which is why emphasis has been placed on the scientific study of the physical and chemical parameters of soil and water.

Water is a very essential component for human civilization, living organisms, and natural habitats. It ma.kes up a major part of plant biomass (about 90% of plant cytoplasm; Singh, 2014). Irrigation, the largest water user sector, is currently under pressure to produce more with higher quality by using limited water to feed the increasing population of the country. The highest proportion of water is consumed by agricultural crops, which is called the blue water footprint, and it is assumed that the water scarcity will increase in the future in view of the changing climate. India has 18% of the world population; however, the water resources are only 4%. Even with all the planning and development, the country has not even been able to provide sufficient drinking water to all at the end of the 20th century. The water sector is facing a number of challenges regarding the availability, accessibility, use, and sustainability of its fresh water resources. Further, the distribution of water in the country is also uneven over space and time. Unfortunately, Rajasthan is the driest state in the country and has been water scarce (with per capita water availability below 1000 m3/year) since 1991. The efficient use of water in agriculture/ horticulture without affecting crop productivity or quality by adopting water saving irrigation techniques is the foremost need. Fruit crops, which have gained commercial attention in recent years, are an important component of Indian agriculture. Due to low irrigation and water use efficiencies, irrigation managers are looking for the introduction of effective water-saving devices and practices for water management in fruit crops.

Nutraceuticals have received considerable attention for their expected safety and potential nutritive and therapeutic effects. These were used as alternatives to modern medicines that promote quality of health, increase the nutritional value of the diet, and prolong life expectancy. Major constituents of nutraceuticals are herbals; various nutrients and dietary supplements are involved in preventing different diseases and minimizing the pathophysiology of the disease too. It also acts as an immune boosting, natural antioxidant, anticancer, anti-inflammatory, anti-diabetic, cardioprotective, and organ protective agent, in addition to different health-promoting effects. Ultimately, they ensure a better quality of life.

The scope of the nutraceutical field is plenty both in terms of type and the varieties. The nutraceuticals industry in India is one of the rapidly growing markets. Higher- and upper-middle-class consumers are perceiving nutra ceuticals as alternatives to prescribed drugs and exclusively for their beneficial properties without any side effects. Consumers are showing sharp interest in nutraceuticals for boosting energy and improving their physical endurance and mental alertness. Nutraceutical industries are focusing on developing new products with innovative formulations and using proper advertisements to choose the right products. Nutraceuticals have significant promise in the promotion of human health and the prevention of disease. They are widely accepted by all age groups due to their safety, higher quality, purity, efficacy, health-promoting, and disease-curing activities. The newest trend is moving toward nutraceuticals, leading to a new era of medicine and health. It is still in its infancy in India. But in this hype era, we must say, “let food be your medicine” and “proper nutraceuticals daily can keep the medicine away.”

India is the second-largest producer of fruits in the world after China. As per the National Horticulture Database (3rd Advance Estimate), the area under cultivation of fruits is 6.914 million hectares with a production of 103.027 million tonnes. Mango (34.71%) ranks 1st in the area, followed by citrus (15.42%), banana, and grapes (2.14%), standing in the 9th position. Likewise, Mango (22.4%) occupies the 2nd position in production, followed by Citrus (12.89%) and Grapes, sharing around 3%. Underutilized fruit crops, such as aonal, bael, ber, Jamun, and tamarind, and minor fruit crops like phalsa, karonda ker, salvadora, etc., are grown in drier tracts of the country, including the arid region. Some of the crops introduced as non-traditional crops have revolutionized the fruit industry in India. Although the total acreage of cultivation and production of fruit crops has accelerated annually, the productivity of fruit crops has been on a declining trend due to several factors impacted by abiotic stresses. Since plants’ first line of defense lies in the roots, the success or failure of orcharding enterprises depends upon rootstocks.

Introduction

Salinity is a significant abiotic stress faced by plants, particularly in semi-arid and arid regions of the world, where annual evaporation exceeds precipitation. In addition, approximately half of all the world’s irrigated areas are subjected to secondary salinization, alkalization, and waterlogging. About 8.85 million ha of land in India is degraded due to salinity and alkalinity problems. Besides the naturally occurring salt-affected soils, the extent of man-made salinized soil is also significant. Salt accumulation in the root zone layers of soils becomes a major constraint to agricultural productivity. However, such lands can effectively be utilized for salt-tolerant biological systems.

To survive under high salt concentrations, some plant species evolved well adapted morphological and physiological characteristics, allowing them to proliferate in saline environments. These species are known as halophytes. Halophytes constitute a small fraction of total plant species; they represent a wide diversity of plant forms and habitats and are of immense significance in expanding salinity problems and decreasing freshwater supply for agriculture. These salt-tolerant species possess enormous taxonomical plant forms and habitat diversity. Taxonomically, the species belonging to Poaceae, Cyperaceae, Chenopodiaceae, and Asteraceae families constitute a significant share of salt tolerant species of north-western hot arid regions of India. In the herbaceous plant group, the species of the family Poaceae are most abundant. In the case of woody perennials, Chenopodiaceae, Tamaricaceae, and Salvadoraceae families are essential as true halophyte and facultative halophyte species.

Water is a critical input for agricultural production and plays an important role in food security. Irrigated agriculture represents 20% of the total cultivated land and contributes 40% of the total food produced worldwide. Irrigated agriculture is, on average, at least twice as productive per unit of land as rainfed agriculture, thereby allowing for more production intensification and crop diversification. India has 18% of world’s population, having 4% of the world’s fresh water, out of which 80% is used in agriculture. India receives an average of 4000 billion cubic meters of precipitation every year. However, only 48% of it is used in India’s surface and groundwater bodies. In India, more than 60% population is still dependent directly or indirectly on agriculture. Most of the available water (more than 90%) is used in agriculture. From 1951 to 1997, gross irrigated areas expanded fourfold from 23 million ha to over 90 million ha, and irrigation continues to be the largest water user. The water availability in India is going to be worse as the agriculture-important states like Punjab, Haryana, Tamil Nadu, and Rajasthan are facing a steady fall in underground water table, and per capita availability of water fall from 3450 cubic meter (1951) to 1250 cubic meter (1999).

Introduction Soil management in horticultural crops refers to the deliberate and systematic approach of caring for soil to optimize its health, fertility, structure, and overall quality to support the growth and development of horticultural plants. It involves a range of practices aimed at preserving and enhancing soil resources, including soil testing, nutrient management, irrigation scheduling, erosion control, and organic matter addition. The goal of soil management in horticultural crops is to create and maintain an environment in which plants can thrive, maximizing crop yields, quality, and sustainability while minimizing environmental impacts such as soil erosion, nutrient runoff, and soil degradation. By implementing effective soil management strategies, horticultural growers can ensure the long-term productivity and viability of their farming operations, while also promoting soil health and resilience in agricultural ecosystems.

Current Soil Conditions

A study conducted in 2016 over 75 fields revealed that soil compaction was present in 70% of annual crops and 60% of perennial crops. Most of the soils used for both annual and perennial cropping were in a moderate condition. However, the soil condition for established crops was improved by performing cultivations before planting. Nevertheless, some soil formations exhibited instability, especially on soils with a lighter texture and a low content of organic matter. The majority of soil cultivations successfully alleviated compaction, however some cultivations had little impact or even exacerbated compaction due to spreading, puddling, or compression when performed in damp or wet field conditions. Tillage pans may greatly diminish productivity and overall efficiency of production by impeding drainage and root development. Approximately 60% of fields cultivating annual crops and 50% of areas cultivating perennial crops had a well-established tillage pan. Approximately 10% of fields underwent deep cultivation without any evidence of soil compaction, indicating a lack of consideration for soil conditions and the need for subsoiling. The abundance of earthworms in the topsoil may serve as a valuable measure of soil health, and is primarily influenced by the intensity of farming practices and the presence, nutritional value, and consistency of earthworm food sources. Earthworm populations exhibited a general scarcity in both annual and perennial crops, while they were relatively more plentiful in areas with ample crop waste and apple orchards. The regular tilling of the soil is believed to be a significant contributing factor to the very low population of earthworms found in places where crops are grown every year. Fields that had a mustard cover crop reported the greatest populations of earthworms.

Introduction

The development of Integrated Pest Management (IPM) was a response to the steadily increasing use of pesticides, which led to crises in pest control (outbreaks of secondary pests and pest resurgence following the development of pesticide resistance), as well as an increase in evidence and awareness of the full costs that the intensive use of pesticides imposes on human health and the environment. The term “Integrated Pest Management” (IPM) refers to the process of carefully considering all of the available methods of pest management and then subsequently incorporating suitable strategies that prevent the growth of pest populations. It integrates biological, chemical, physical, and crop-specific (cultural) management tactics and practices in order to cultivate healthy crops and avoid the use of pesticides. This helps to reduce or eliminate the hazards that pesticides cause to human health and the environment, which is essential for sustainable pest control. IPM is a dynamic process that makes use of an ecological systems approach and encourages the user or producer to examine and employ the complete range of optimal pest management choices available given economic, environmental, and social factors. IPM is accomplished via the use of an ecological systems approach. Integrated Pest Management (IPM) is founded on ecology, the idea of ecosystems, and the objective of maintaining ecosystem processes. Additionally, it stimulates the use of natural pest management techniques, which in turn promotes the establishment of a healthy crop while causing the least amount of damage to agroecosystems as feasible.

Integrated weed management (IWM) in agricultural crops is a comprehensive approach combining multiple strategies to control weed populations effectively and sustainably. IWM integrates cultural, mechanical, biological, and chemical methods to manage weeds in a way that minimizes the reliance on herbicides, reduces the risk of herbicide resistance, and promotes environmental health. Cultural practices include crop rotation, cover cropping, and optimizing planting densities to outcompete weeds. Mechanical methods involve tillage, mowing, and manual removal, while biological control utilizes natural predators and competitive plants. Chemical controls are applied judiciously, targeting specific weed issues with appropriate herbicides. By employing a diversified approach, IWM enhances crop productivity, supports biodiversity, and fosters long-term agricultural sustainability.

Integrated weed management (IWM) is a critical aspect of sustainable horticultural crop production, offering a multifaceted approach to effectively control weed populations while minimizing environmental impact. Horticultural crops, including fruits, vegetables, and ornamentals, are highly susceptible to weed competition, which can reduce yields, harbour pests and diseases, and hinder crop quality. IWM integrates various control methods, including cultural, mechanical, biological, and chemical approaches, tailored to the specific needs and characteristics of horticultural systems. Cultural practices such as mulching, crop rotation, and intercropping help suppress weeds by creating unfavourable conditions for their growth and development. Mechanical methods, including hand-weeding, hoeing, and the use of specialized machinery, physically remove weeds and disrupt their growth cycle. Biological control strategies involve the introduction of natural predators or competitive plants to reduce weed populations. Chemical controls, when necessary, are applied selectively, targeting specific weed species while minimizing herbicide use and environmental impact. By combining these diverse tactics, IWM in horticultural crops improves weed control efficacy, enhances crop health and vigour, and promotes long-term sustainability in horticultural production systems. This holistic approach contributes to higher yields, better crop quality, and reduced reliance on chemical inputs, ultimately ensuring the economic viability and environmental sustainability of horticultural crop production.

The method known as integrated water management (IWM) in agricultural crops is an all-encompassing strategy that aims to maximize the effectiveness of water use, enhance crop output, and guarantee the management of water resources in a sustainable manner. This method incorporates a number of different water management strategies, such as the timing of irrigation, the use of water-saving devices, the monitoring of soil moisture, and conservation measures. Combining these methods allows IWM to achieve its goal of limiting water losses caused by evaporation, runoff, and deep percolation while simultaneously ensuring that crop water demand is met by the available water supply. Mulching, cover cropping, and crop rotation are examples of cultural techniques that assist improve soil moisture conservation and decrease water loss via evaporation. The application of water may be made more exact and targeted by the use of mechanical technologies like as precision irrigation systems, drip irrigation, and soil moisture sensors. This helps to maximize the efficiency with which crops utilize water. Improvements in water retention and plant resistance to water stress may be achieved via the use of biological controls. These controls include the selection of drought resistant crop cultivars and the enhancement of the organic matter content of the soil. Chemical controls, such as the use of soil conditioners and wetting agents, have the potential to improve soil structure and infiltration, hence permitting improved water distribution and absorption by crops. In general, integrated water management (IWM) plays a significant part in reducing the issues associated with water shortages, fortifying agricultural systems against the effects of climate change, and fostering sustainable water use practices in agricultural systems.

Post-harvest management of horticultural crops is a critical aspect of agriculture aimed at preserving the quality, freshness, and nutritional value of fruits, vegetables, and ornamental plants from the time of harvest until consumption. This abstract highlights the importance of effective post harvest management practices in minimizing losses, ensuring food security, and maximizing economic value in the horticultural sector. It emphasizes the diverse range of challenges faced, including perishability, susceptibility to physical damage, and vulnerability to pests and diseases. The abstract also underscores the significance of infrastructure development, technological innovation, and capacity building in addressing these challenges and improving post-harvest handling, storage, and distribution systems. Overall, the abstract provides a concise overview of the importance and complexities of post-harvest management in horticulture, laying the foundation for further research and action in this critical area of agriculture.

The interaction between soil and plants is a complex and dynamic process that plays a vital role in determining plant growth, productivity, and nutrient uptake. This abstract explores the intricate relationship between soil properties, root morphology, and nutrient availability, highlighting key mechanisms involved in nutrient uptake by plants. Soil serves as the primary reservoir of nutrients essential for plant growth, providing essential elements such as nitrogen, phosphorus, potassium, and micronutrients. Plant roots play a critical role in accessing these nutrients, with their morphology and distribution influenced by soil texture, structure, and nutrient availability. Various mechanisms, including root exudation, mycorrhiza associations, and ion exchange, facilitate nutrient uptake by plants, enhancing their resilience to environmental stresses and optimizing nutrient use efficiency. Understanding the dynamics of soil-plant interaction and nutrient uptake is essential for sustainable agriculture, guiding the development of management practices that promote soil fertility, crop nutrition, and ecosystem resilience.

Soil amendments and organic matter play critical roles in enhancing soil fertility, improving crop productivity, and promoting sustainable agriculture. This abstract provides an overview of the importance of soil amendments and organic matter in soil management practices, highlighting their impacts on soil structure, nutrient availability, and microbial activity. By incorporating organic amendments such as compost, manure, and green manures into soil, farmers can replenish essential nutrients, improve soil structure, and enhance water retention capacity. Additionally, soil amendments can mitigate soil degradation, erosion, and nutrient runoff, contributing to long term soil health and ecosystem resilience. Understanding the benefits of soil amendments and organic matter is essential for promoting sustainable soil management practices and ensuring food security in a changing climate.

Introduction

It refers to all activities designed to identify materials that cannot be used directly in breeding programmes, and further to transfer these traits to an intermediate set of materials that breeders can use further in producing new varieties for farmers. It is a bridge between Genetic Resources and Crop Improvement. That is collaboration between germplasm curator and plant breeder.

Crosses between adapted and exotic materials, where different proportions of introgression are obtained and evaluated, have been denominated as semi exotic materials. That should be readily used in regular breeding programme for cultivar development.

Objectives of pre-breeding 8-10 Years • Improved germplasm and associated genetic knowledge that enhance resistance expression and diversity.

• Reduce genetic uniformity in crops through the use of a wider pool of genetic material to increase yield, resistance to pests and diseases, and other quality traits.

• Identification of desirable traits/genes and their subsequent transfer into a suitable set of parents for further selection.

• Improved parental stocks which can be readily utilized within breeding programs and improved selection methodologies.

• Identify potentially useful genes in a well-organized and documented gene bank Designing strategies that lead to development of an improved germplasm that are ready to use in varietal development.

Previous Year Questions

1. What is seed treatment?

2. Factors affecting the seed quality of a crop during seed production?

3. Seed treatment campaign – Role & importance?

4. Agronomic and genetic principles of quality seed production?

5. Varietal seed production and hybrid seed production?

Seed Treatment

Seed treatment refers to the application of fungicide, insecticide or both to the seeds to disinfect(deep seated) and disinfest (over seed coat) them from seed borne or soil borne pathogenic organisms and storage insects. It also refers to subjecting the seed to solar energy exposure or immersion in conditional water.

Previous Year Questions

1. Intellectual property rights (IPR) are the rights given to persons over the creations of their minds: inventions, literary and artistic works, and symbols, names and images used in commerce. They usually give the creator an exclusive right over the use of his/her creation for a certain period of time?

2. Plant varietal protection?

• The importance of intellectual property was first recognized in the Paris Convention for the Protection of Industrial Property (1883) and the Berne Convention for the Protection of Literary and Artistic Works (1886). Both treaties are administered by the World Intellectual Property Organization (WIPO).

Introduction

Intensive production of agricultural crops has contributed to decline in soil quality, leading to lower crop productivity and farm profitability. Major causes of this decline are soil compaction, surface crusting, low organic matter, increased pressure and damage from diseases, weeds, insects, and other pests, as well as a lower density and diversity of beneficial soil organisms. These constraints have increased the interest of farmers in assessing the health status of their soils and in implementing sustainable soil management practices. Soil health is critically important to sustainable agricultural productivity and environmental well being. Healthy soils provide a range of environmental services including water infiltration, habitat provision and profitable and sustainable agriculture.

Introduction

Soils are formed by weathering of rocks and minerals and all soils contain some amount of soluble salts. Many of these act as a source of essential nutrients for the healthy growth of plants. However, when quantity and quality of salts in the soil near rhizosphere exceeds a particular value, growth, yield and/or quality of most crops is adversely affected. Such a soil is called salt-affected. The degree of adverse effects depends upon the type and quantity of salts, crop and its variety, stage of growth, cultural practices and environmental factors viz. temperature, relative humidity, and rainfall etc. Development of salinity and waterlogging is a serious problem in arid and semi-arid regions of the world and threatening the sustainability of irrigated agriculture.

Soil degradation resulting from salinity and sodicity is a major environmental threat to soil fertility and agricultural productivity in arid and semiarid regions of the world. Saline–sodic soils are degraded due to the simultaneous effect of salinity and sodicity. This causes loss of soil physical structure by clay swelling, and dispersion because of high Na+ concentrations in the soil solution or at the exchange phase. Apart from these physicochemical effects, this leads to biological properties, such as microbial respiration and biomass, becoming worse. On the other hand, salinity affects plant growth by creating osmotic imbalances and specific ion toxicities, which pose limitations to morphological, histological, chemical, biochemical, and metabolic processes. In turn, these reduce stomatal opening and photosynthetic rate, leading to decreased plant growth, crop yield, and quality.

Introduction

Environment pollution is a burning topic of the day. Air, water and soil are being polluted alike. Soil being a “universal sink” bears the greatest burden of environmental pollution. It is getting polluted in a number of ways. There is importance in controlling the soil pollution in order to preserve the soil fertility and increase the productivity. Pollution may be defined as an undesirable change in the physical, chemical and biological characteristics of air, water and soil which affect human life, lives of other useful living plants and animals, industrial progress, living conditions and cultural resources. A pollutant is something which harmfully interferes with health, comfort and environment of the people. Most pollutants are introduced in the environment by waste, accidental discharge, sewage or else. They are by-products or residues from the production of something useful. Due to this our valuable natural resources like air, water and soil are getting polluted. The basis of agriculture is Soil. All crops for human food and animal feed depend upon it. We are losing this important natural resource by the accelerated erosion to some extent. In addition to this the huge quantities of man-made waste products, sludge and other product from new waste treatment plants, and even polluted water are also causing or leading to soil pollution. In order to preserve the fertility and the productivity of the soil.

Introduction

Desert soils are the soils of arid regions that remain dry for most part of the year and support sparse xerophytes. The amount of water received by precipitation is far less than what is lost by evapotranspiration. Most deserts receive an average precipitation of less than 400 mm. Because of extreme imbalance between evapotranspiration and precipitation, many desert soils contain salts.

Distribution

Deserts occupy about one-third of the areas of Africa and Australia, 11% of Asia and about 8% of the Americas (Boul et al. 1997). Desert soils include both cold and hot desert. In India, desert soils occur in three agro-ecological regions (AER). The cold arid desert of extreme north (Leh, Ladakh region of Jammu & Kashmir ), the hot arid desert of north western India (Rajasthan, southern parts of Haryana and Punjab and northern parts of Gujarat) and the tropical arid desert of the Deccan plateau in South India represents AER 1, 2 and 3, respectively. The three different desert regions in India have characteristic climatic and soil conditions.

Introduction

Soil pollution is anything that causes contamination of soil and degrades the soil quality. It occurs when the pollutants causing the pollution decrease the quality of the soil and convert the soil inhabitable for micro and macro organisms living in the soil. Soil pollution can occur either because of human activities and/or natural processes. However, mainly it is due to human activities. The soil contamination can occur due to the presence of chemicals such as ammonia, pesticides, lead, herbicides, mercury, nitrate, naphthalene, petroleum hydrocarbons, etc. in an excess amount.

Soils can be polluted with several organic and inorganic pollutants. Organic pollutants contain hazardous persistent organic compounds viz. polychlorinated dibenzofurans (PCDFs), polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzodioxins (PCDDs), polychlorinated biphenyls (PCBs), polychlorinated naphthalines (PCNs) and other persistent organic compounds. Inorganic pollutants contain heavy metals like lead (Pb), cadmium (Cd), mercury (Hg), zinc (Zn), copper (Cu), arsenic (As) and nickel (Ni) as well as some radioactive compounds or radionuclides. The major sources of soil pollutants are anthropogenic. It contains mainly two sources, point and diffuse; the point sources contains industrial wastes, municipal wastes, domestic wastes, medical wastes, agrochemicals, agricultural wastes, composts and sludges and nuclear wastes. Organic and inorganic soil pollutants can be toxic for plants, animals soil organisms and others. Some compound of the soil pollutants enter into the food chain and can adversely affect on human health. Soil pollutants can be also transferred to surrounding air and water through leaching, volatilization, runoff and dust storms. Quality of air and water adversely affected can be degraded. Thus, remediation of polluted soils has become an awful necessity in many areas of the world.

11.1. Introduction

A fruit preserve is a product made from properly matured fruit by cooking it whole or in the form of large pieces in heavy sugar syrup, till it becomes tender and transparent. A fruit impregnated with cane sugar and glucose, followed by subsequent draining and drying is called a candied fruit e.g. petha candy, ginger candy. Further, candied fruit covered or coated with a thin transparent coating of sugar, which imparts a glossy appearance is referred to as a glaced fruit. When candied fruit is coated with sugar crystals either by rolling it in powdered sugar or by allowing the sugar crystals from glucose syrup to deposit on it, it becomes a crystallized fruit. The use of high concentration of sugar in these products acts as the preservative. The products like Petha candy, aonla preserve, apple rings; candied citrus peels, ginger candy, ginger in syrup; bael, pineapple and carrot preserve are the commercial products in this category.

The significant interest in the diffusion of innovations stems from the challenge of adopting new ideas, even those with clear advantages. A substantial gap often exists between available knowledge and its practical application across various fields. Many innovations experience a lengthy period, sometimes spanning several years, from their initial availability to widespread adoption. Consequently, individuals and organizations frequently grapple with the issue of accelerating the diffusion rate of an innovation.

Diffusion refers to the process by which an innovation is communicated over time through specific channels among members of a social system. This form of communication is distinct in that it involves the dissemination of new ideas. In contemporary society, information technologies like the Internet and mobile phones, which blend mass media and interpersonal communication, serve as powerful diffusion tools. The novelty of the idea in the communication content gives diffusion its unique character.

Within a social system, some innovations diffuse rapidly from initial introduction to widespread use in just a few years. For instance, pocket calculators saw rapid adoption during the mid-1970s. In contrast, other electronic innovations, such as home videotape equipment, have only achieved about 3 percent adoption over the past eight years. What are the characteristics of innovations that influence the rate at which they diffuse and are adopted?

Within a social system, some innovations diffuse rapidly from initial introduction to widespread use in just a few years. For instance, pocket calculators saw rapid adoption during the mid-1970s. In contrast, other electronic innovations, such as home videotape equipment, have only achieved about 3 percent adoption over the past eight years. What are the characteristics of innovations that influence the rate at which they diffuse and are adopted?

Decisions to adopt innovations are influenced by a complex array of factors, including:

Individual Attributes: Characteristics such as income can significantly impact the decision-making process.

Attributes of the Social System: Innovations may be perceived as violating ethical norms or threatening the privileges of elites within the social structure.

Perceived Attributes of the Innovation: Factors such as the appearance or performance of a new crop variety in a test plot can influence adoption decisions.

Rogers' (1983) model, illustrated in Figure 19-1, outlines the stages involved in the decision to adopt an innovation.

Acquiring information about the value of an innovation is inherently costly. While beneficial innovations exist, there are also numerous unsuitable or harmful ideas. The presence of deceptive salesmen and overly enthusiastic entrepreneurs complicates this process. As noted in Proctus' lament from the epigraph, the challenge lies in employing effective decision-making strategies to maximize the likelihood of adopting beneficial innovations and rejecting detrimental ones, all while acknowledging the costs involved in making these decisions.

Agriculture constitutes the primary source of income in rural India. Rural women play a pivotal role in various agricultural practices, encompassing activities such as planting, harvesting, and post-harvesting operations. Additionally, their responsibilities extend to producing agricultural crops, tending to animals, processing and preparing food, engaging in wage labor within agricultural or other rural enterprises, collecting fuel and water, participating in trade and marketing, caring for family members, and maintaining their homes (Klasen and Lamanna, 2009).

The engagement of rural women in agriculture is extensive and multifaceted, covering a wide range of activities that are vital for household sustenance and community welfare. These activities are essential not only for economic stability but also for food security and overall rural development.

The diffusion of need-based appropriate technologies involves strategically promoting and implementing innovations that meet the specific needs of a community. Utilizing various interactive and engaging techniques such as methods demonstration, group discussion, role play, and exhibitions can significantly enhance the effectiveness of this process.

A demonstration is an educational technique that involves showing or presenting a process, product, or concept in action to an audience. The primary goal of a demonstration is to provide a clear, practical example that enhances understanding and encourages the adoption of new practices or technologies. Demonstrations are often used in educational, training, and outreach programs to effectively convey information and skills.

Air is one of the primary things that make life on earth possible. The earth’s atmosphere or air is made up of variety of gases and other particles. The dynamic layer surrounding the earth’s surface containing various mixture of gases, moisture and solid particles (aerosols) is called atmosphere. The atmosphere is generally defined as the gaseous envelop surrounding the earth.

The formation of the earth was believed to be about five billion years ago. In the first 500 million years, a thick atmosphere emerged from the vapour and gases that were expelled from the interior of the earth. Hydrogen (H2 ), water vapour, methane and carbon dioxide were some of the gases believed to be initially formed in the atmosphere due to out gassing from the interior of the earth. About 3.5 billion years ago, the atmosphere consisted of carbon dioxide (CO2 ), Carbon monoxide (CO), water vapour (H2 O), nitrogen (N2 ) and hydrogen present in atmospheric layers like troposphere, stratosphere, mesosphere, thermosphere (Fig. 2.1). The condensation of water vapour into water led to the formation of oceans in which sedimentation occurred and the hydrosphere was created. In the initial and ancient environment, oxygen was not present. Anaerobic is technical word which literally means without air (where air is generally used to mean oxygen and aerobic indicates the presence of oxygen). Evidence of such an anaerobic reducing atmosphere was hidden in early rock formations such as iron and uranium in their reduced states.

4.1. Classification

The class Aves, also known as birds, is a group of warm-blooded vertebrates characterized by feathers, toothless beaked jaws, laying hard-shelled eggs, a high metabolic rate, a four-chambered heart, and a strong yet lightweight skeleton. Birds are found worldwide and come in a variety of sizes, from the tiny humming bird to the massive ostrich.

The classification of Aves can be broken down into two major subgroups: Palaeognathae and Neognathae.

4.1.1. Palaeognathae: Also known as ratites, these are flightless birds with f lat sterna (breastbones) that lack keels, which are important for flight muscle attachment. Examples of palaeognathae include ostriches, emus, rheas, and kiwis.

1. Introduction

The present library system has been designated as a treasure of knowledge in virtual environment. The concept of modern library has been considered as the source of high level-information using web technology, digitization, networking,e-resources and multimedia. The rapid development of modern information and communication technologies and smart usage of computers in library and information system and services has given rise to new generation of libraries. The last two decades have radically transformed the library system with new avenues of information transfer in virtual world. An incredible amount of growth in increasing new interfaces have been developed utilising latest technologies to optimise the delivery of contents and services in the context of web environment. The emerging new vision of library interfaces has involved web technologies, digital collection of texts and images, documents, genealogy of records and other materials of importance for the user community. The major shift of new technology has developed the subscription of e-journals, e-books, and e-databases collection in libraries. Such library interface is compelled to provide equal access to the contents or these collection to all users irrespective of area or locality. Another remarkable trend in library technology field is the emergence of open-source software movement that enabled to transform the automation and digital library interface. Open Source Software efforts such as OAI, Grenstone, DSpace, Koha etc, have drastically transformed the library technology scenario in terms of sophistication and functionality. This article/ chapter is dealt with the state of digital library system with stages of generation of digital libraries and future directions.

1. Introduction

A public library is a repository of diversified material that serves as the primary hub for community information the spread. It provides fair access to a wide range of information and data, meeting the diverse demands of users. Services must be inclusive, with information appropriate for all age groups and the incorporation of both classic materials and contemporary technologies across many mediums. In 1987, the ILA defined the purpose of public libraries, stating that they should serve as independent training centers for community activities. Public libraries play a pivotal role in fostering community engagement, welcoming all members to participate in various programs. Initially established by the public, these libraries later received government funding for expansion and other requirements. The systematic development of India's public library system ensued after the establishment of the Raja Rammohan Roy Library Foundation (RRRLF) in 1972.

1. Introduction

Disasters are events that occur over a period and cause widespread destruction, suffering, or distress to everything they affect (Oxford English Dictionary, n.d.). The impact of a disaster may be confined to specific areas or widespread and could last for an extended duration, often requiring assistance from external sources to address the aftermath (International Federation of Red Cross and Red Crescent Societies [IFRC], n.d.). These events can arise from naturally occurring phenomena, such as earthquakes, tornadoes, or floods, as well as man-made occurrences, including industrial accidents (e.g., accidental toxic spills or nuclear power plant events) or acts of terrorism (e.g., bombing or poisoning) (United Nations Office for Disaster Risk Reduction [UNDRR], n.d.). Disasters typically result in significant harm to infrastructure, loss of life, displacement of people, and severe economic consequences.

1. Introduction

Information is necessary for the economic, social, and cultural development of individuals and communities, and libraries play a significant role in providing access to information, which is essential for this growth. These institutions function as centers of knowledge, offering a wide range of resources to their users, including books, journals, databases, and multimedia materials, in order to meet the varied requirements of their users.

In this day and age, the function of libraries has evolved beyond the confines of physical locations to encompass activities such as online platforms and digital collections. Because of the large amount of information that is accessible on the internet, people rely on libraries to help them navigate through this sea of data and locate sources that are credible and reliable.

In addition to the camera itself, there are several accessories that can enhance  your video recording experience. Here’s a list of common video camera  accessories:
1. Tripods
Purpose: Stabilize your camera for steady shots.
Types: Standard tripod, monopod, mini tripod, and fluid head tripod for  smooth panning.
2. External Microphones
Purpose: Improve audio quality compared to built-in microphones.
Types: Lavalier (clip-on), shotgun, and handheld microphones.
3. Lighting Equipment
Purpose: Enhance lighting conditions for better video quality.
Types: LED lights, softboxes, and ring lights.
4. Camera Bags
Purpose: Protect and carry your camera and accessories.
Types: Shoulder bags, backpacks, and hard cases.
5. Extra Batteries and Chargers
Purpose: Ensure you have enough power for extended shoots.
Types: Spare batteries, battery chargers, and portable power banks.
6. Memory Cards
Purpose: Store recorded video footage.
Types: SD cards, microSD cards, and CF cards depending on camera compatibility.

Composition is a fundamental element of cinematography, essential for creating engaging video content. When designing shots and angles, videographers must consider not only technical aspects like lighting and sound but also creative choices that set the mood. Video composition helps filmmakers craft a narrative, influencing how viewers engage with the story. Effective composition goes beyond just framing; it involves color grading and the strategic placement of elements within the frame, making it vital for captivating the audience.

Video Composition Tutorial

A tutorial from B&H Photo’s YouTube channel outlines five crucial rules of video composition that should not be broken. These rules serve as a foundation, providing structure and consistency to the creative process

An unmanned aerial vehicle (UAV) is any aircraft or flying machine that operates without a human pilot. UAVs can be controlled autonomously or remotely by a human operator using onboard computers and robotic systems. In surveillance or military operations, UAVs are often part of an unmanned aircraft system (UAS). Drones, a common term for UAVs, have gained popularity for various applications such as photography, videography, surveying, inspection, and delivery.

The essential components of a drone include the frame, motors, propellers, battery, flight controller, and sensors. Let’s explore these components in detail:

1. Frame

2. Battery

3. Flight Controllers

4. Sensors

5. Motors and Propeller

Introduction

In agricultural extension and education, video production plays a pivotal role in disseminating information, training farmers, and promoting best practices. The effectiveness of these videos is often determined by the quality of their scripts. This chapter explores three primary types of video scripts: basic production scripts, storyboard scripts, and camera scripts. Each type fulfills a distinct role in the production process, and understanding their unique functions is crucial for creating engaging and informative content. By examining these script types, this chapter aims to provide a comprehensive guide to the scripting process, helping to enhance the quality and impact of educational and promotional videos.

Script

A script is the written content for visual stories, such as plays, television shows, or movies. While scripts often include stage directions and production notes for performers and crew, their primary focus is on the dialogue between characters. Scripts serve as a blueprint for the entire production, guiding actors and technical crew through their roles and responsibilities. For example, a script for a stage play will detail character interactions, emotional tone, and specific actions, ensuring that all elements of the performance align with the director’s vision.

In this unit, we will explore the essential skills necessary for presenting radio and television programs in a way that ensures they are engaging, effective, and successful in communication. It is widely recognized that even a program with strong content and a well-crafted script can fail to achieve the desired impact if it is not delivered in an appealing manner. We will analyze the key qualities of an effective presenter and examine the process of refining a script before it is presented on air, whether through a microphone or in front of a camera.

Presentation Techniques for Radio

The overall impact of a radio program is determined by the script, production quality, and the manner of presentation. While it can be argued that presentation and packaging fall under production quality, it is crucial to recognize that in an aural medium, the choice of words in the script is just as important as their delivery. Therefore, radio producers must be equally adept at presentation techniques, as these can significantly influence the success or failure of the entire production.

The concepts of health, disease, symptoms, constitution, cure, vital force, suppression of the disease, individualization, totality of symptoms, and dose etc. are unique in homeopathy differing from concepts of modern medicine.

Health

Generally, health is considered as freedom from disease. According to World Health Organization health is “a state of complete physical, mental and social well-being, not merely the absence of disease or infirmity” (WHO, 1946). In homeopathy, it is defined as mental, physical and emotional wellbeing (Mondal, 2006 a) and the healthy body has been described as one in balance and equilibrium. The equilibrium of internal parameters is maintained by “life forces” corresponding to a general interpretation of immune system . In fact ‘Life force” is the actual energy behind the biochemistry of the body. It ends with death of the organism.

The economics of migration has drawn attention of many economists and social scientists over the years. Decision making in migration has certain inherent complexities as it takes into account the characteristics of both areas of origin and areas of destinations. Similarly it involves the status of agricultural productivity and efficiency, extant of urban informal sector along with various other amenities available in the destination urban areas. The subject of rural-urban migration and its inter-linkage with urban informal market and agricultural productivity have received considerable attention in theoretical framework as well as in empirical research. Among these vast literatures, the study has reviewed some of them and made a synoptic assessment on these issues in general. Moreover an attempt has been made to review the existing literature on rural-urban migration in West Bengal.

2.1 Migration Decision Making

Migration decision can be two types: individual decision making and family decision making. These two sets of migration decision involve distinctly different sets of factors. Stark (1991) has rightly pointed out that “….the family, should not be treated as if it were an individual”. So there are differences between individual migration decision and family migration decision. Migration decision depends on a host of factors, some are economic, some are demographic and some are sociological in nature. However, individual and family migration decisions are determined by two distinctly different sets of factors.

Amyloid

• Amyloid (G. Amylon; Amyl(o) - STARCH) means starch-like.

• Amyloid is a pathologic glycoprotein deposited in the extracellular spaces and forms fibrils on polymerization.

Histological characteristics

• Amyloid is specially stained with Congo Red.

• Under polarized light, green birefringence is noticed because of alignment of fibrils.

• Amyloid fibrils are 7.5 to 10 nm in diameter, rigid, non-branching hollow-cored tubules of unknown length.

• β-pleated sheet configuration is seen in X-ray diffraction.

• The P-component which is a glycosa-amino-glycan (GAG) facilitates polymerization of amyloid.

Nervous system is composed of brain, spinal cord, and peripheral nerves. The neuron is a basic functional unit of nervous system. Necrosis of neurons in brain is known as encephalomalacia while necrosis of neurons in spinal cord is termed as myelomalacia. If the necrosis occurs in grey matter it is known as polioencephalomalacia while necrosis of neurons in white matter is called as leukoencephalomalacia. There are three types of scavenger cells in nervous system known as microglial, oligodendroglial and astrocytes. Microglial cells surround the necrotic neurons and are known as satellite cells and the process is called as satellitosis. As the neuron dies, it is engulfed by microglial cell and this process is termed as neuronophagia. The necrosis of nerve fibers starts from myelin sheath and this change is called demyelination or Wallerian degeneration.