eChapters

The amount of feed or nutrient intake by an animal which is not excreted in the faeces is considered to be digested by the animals. The depiction of digested feed/nutrient as percentage of intake is known as digestibility coefficient. However, this does not represent the true value of digestibility of a feed or nutrient because during the period of recording some part of digested material is returned to the digestive tract after absorption in the body and excreted in the faeces. In addition to this some secretions of the digestive system and debris of epithelial cells are also eliminated in the faeces. These errors are quite large and highly variable for the nitrogenous constituents and minerals in the feeds. Due to these factors the determined digestibility coefficient is known as apparent digestibility coefficient. For the determination of digestion coefficient, only daily intake of feed or nutrients and faecal void values are recorded.

The availability of nitrogenous nutrients and minerals is more accurately determined by their retention (balance) in the body. Therefore, for the determination of the retention of nitrogen and minerals,metabolism trials are conducted. The routes of elimination of these constituents from the body are faeces, urine, expired air, skin secretions and milk (in case of lactating mammalian species). In a conventional balance study the loss of nutrient (s) through skin, being quantitatively little, is ignored. However, in case of some very specific study, collection of skin secretions and materials like shed hair and scurf are collected. For the collection of skin secretion (sweat) a special absorbant suit is used. In all routine balance studies, on male animals quantity of intake and void in faeces and urine are only taken into account.

Purpose:- To know the method of fitting the immobilised fractured hind limb in Thomas splint.

Description

The fractured site is immobilised properly covering the area joint below and joint above from the fractured site.

The immobilised limb is kept within the prepared Thomas splint.

The immobilised limb is kept straight and come close with the front extension bamboo of the Thomas splint.

The foot is fixed to the distal end of the Thomas splint with bandage roll.

In the first attempt the immobilised limb is secured with the front bamboo splint with bandage roll at several places to avoid posterior movement of the immobilised limb.

At the time of fixing the immobilised limb with anterior extension bamboo of Thomas splint, the limb is fixed with the netting of Thomas splint to avoid medial movement of immobilised limb.

Finally the immobilised limb is covered with bandage roll wrapping around both the anterior and posterior extension bamboo of the Thomas splint to avoid outer movement of the immobilised limb.

The method of immobilisation of the hind limb with Thomas splint has been shown in the figure.

Aim: To secure the foot on the distal end of Thomas splint.

Procedure

1. Foot is placed upon the distal end of Thomas splint.
2. The foot of the animal is wrapped V’- two round with bandage cloth.(Fig.1)
3. 2^nd round of bandage cloth is wrapped around the distal end of Thomas splint.(Fig.2)
4. In 3^rd attempt, the bandage roll is taken from the ground level of the foot & including the distal end of foot.(Fig.3)
5. The bandage roll is taken through the gap between anterior end of Thomas splint.(Fig.3)
6. In 4th attempt, the bandage roll is taken from the volar or plantar aspect of the limb and passed upon the ground level of foot as well as the distal end of Thomas splint.(Fig.4)
7. Final 2 rounds of bandage cloth is wrapped through entire surface of foot.

Reference: Tyagi R.P.S. and Singh J, (2013), Ruminant Surgery, CBS Publishers, New Delhi, pp-353,354

In the words of Leonardo the vinci, “water is the driver of life”. It is said to be the liquid of life or elixir of life. Water availability is essential to consider as commercial orchards must have reliability of supply and cannot produce optimum yields without irrigation. Water management is one of the largest and most important inputs into an orchard. The single environmental component which determines the type of fruit plants to be selected for a specific ecological situation is the moisture status of the region. Different fruit plants preferring diverse moisture status have wide peculiarity in their anatomical and morphological structures as well as various modifications in their water absorbing organs. They are also seen to have varied capabilities to acquire and utilize water efficiently. In the plant system, the rate of dry matter production has a definite relation with the rate of transpirational loss of water and this transpiration ration is calculated on the basis of unit of water required to produce unit of drymatter. However, while calculating the water requirement of fruit plants, a number of factors, in addition to water use efficiency, are taken in to consideration. Naturally water requirement of a particular fruit plants varies with the agro-ecological condition of different places. Moreover the same cannot be equal in an established orchard and a newly planted one. In established orchard, the trees are grown in community where improved water use efficiency lower down the water requirement of the trees.

Definition : These are the splints made out of light metal rods or bamboo for correction and immobilization of middle and higher level fracture in animals.

I. FILL UPS

1. The beheaded portion of cabbage is called _____.
2. _____ method is followed for cauliflower seed production in India.
3. In carrot, _____ method is followed among seed companies for large commercial seed production.
4. Knob to seed method is followed in _____.
5. Bulb to seed method is followed in _____.

Purpose

Method of tying with bamboo splint with ring is very important because of the following points.

A string fitting with the bamboo splint is required as with loose fitting with it may come up at any stage before actual bone healing.

Introduction

The word cooperation is of Latin origin and it means to work together (Filley, 1929).Cooperatives are founded on the values of self-help, self-responsibility, democracy, equality, equity and solidarity. Based on the founding principles of co-operatives, members believe in the ethical values of honesty, openness, social responsibility and caring for others (Canadian Business Service Centre, 2004). A fishery co-operative society can be defined as “An autonomous association of people united voluntarily to meet their common economic, social and cultural needs and aspirations through a jointly-owned and democratically controlled fishery enterprise or fishery activities.”

Attitude implies that the individual is no longer neutral toward the referent psychological objects. The person would be positively inclined or negatively disposed in some degree towards the referents (Campbell, 1963; Allport, 1966; Newcomb, 1966; Zanden, 1977; Burr, 2000). The response in this connection is a lasting one, as long as the attitude in question is operative. Attitude refers to a psychological individual’s stands about objects, issues, persons, groups, or Institutions. The definition of attitude proposed by Triandis (1971) suggests that attitude has three components: (a) a cognitive component (the idea), (b) an affective component (the emotions), and (c) a behavioural component (the action).

Introduction

Plant protection in India is mainly based on use of pesticidal chemicals. Chemical control is one of the effective and quicker methods in reducing pest population where farmer gets spectacular results within a short time. However, indiscriminate use of pesticides results in a series of problems in the agricultural ecosystem mainly the development of resistance in insects to insecticides, resurgence of treated population, environmental contamination and residue hazards. Destruction of natural enemies of insect-pests, expenses on pesticides etc. contributed to a new way of thinking concerning pest control practices i.e. integrated approach of pest control. IPM was first proposed by Stern and his collegues for integration of biological and chemical control measures. This is not altogether a new concept; it was practiced before the advent of modern chemicals. The date of sowing the crop were carefully studied to ensure that crop was not being planted when it would encounter severe pest problems, cultural practices such as ploughing after harvest, timely weed control, well timed irrigation and reduced use of fertilizers all contributed to reduce pest population. Most of these methods were curtailed when modern pesticides become available it was thought that these chemicals alone could control pests, but now we know that this is not possible and a single method of approach in pest control is not feasible. An integrated approach of pest management (IPM) was devised on the principles of managing the pest rather than eradicating them. IPM is a broad ecological approach for managing pest problem encompassing available methods and techniques such as cultural, biological, mechanical and chemical in a compatible manner to reduce and maintain the pest problem below the economic injury level.

Introduction

Economists consider a producer as an income or profit maximiser. In our context, it may mean enhancement of fisheries contribution to the GDP, increased fish production, Nutritional security of those who need it most, not just those who can afford to pay for it improvement in the livelihood conditions of the stakeholders, augmenting exports to net more foreign exchange, growth with social equity or inclusive growth, etc. Realisation of a goal or target depends on development and enforcement of necessary policy strategies for which a reliable data base is inevitable. Analytical trends of the past data could help to project future trend which could indicate feasibility of the envisioned goal. Here, an outline of some of the Methodological issues in Fisheries data collection is provided.

The Resource Endowments

Fisheries is a sunrise sector in India, in terms of food and nutritional security, employment and income generation. India is the 3rd largest fish producer and the 2nd in aquaculture production, globally. It contributes about 1% of national GDP and 5 % of agriculture GDP. The exports of marine products account for about 5% of total Indian exports in 2018-19. The estimated fish production during 2017-18 was 12-59 million tones (mt). It was 10.14% increase over 11.43 million t in 2016-17. Inland fisheries grew at 14.05% while marine fisheries rose at 1.73% in 2017-18. Fisheries sub-sector provides livelihood support and gainful employment to 14 million people. Many more may be employed now as available data is yet to be updated.

Introduction

The term ‘Fish Marketing’ is composed of two broad meaning term ‘Fish’ and ‘Marketing’. Before discussing the methodological issues of fish marketing data analysis, we must understand the broader meaning of it as both words are being used frequently with a précised meaning. Google dictionary explains fish as ‘A limbless cold-blooded vertebrate animal with gills and fins living wholly in water’. But ‘fish’ as a component of fish marketing or social science study, means a product and a variety of product, which has different time, space and form utilities for consumers.

The word ‘marketing’ is not merely buying and selling of fish, rather it connotes a series of activities involved in moving goods or services from point of production to the point of consumption. So ‘fish marketing’ is defined as physical and institutional set up to perform all activities involved in the flow of fish, fish products and services from the point of initial fish production until they are in the hands of ultimate customers.

It includes assembling, handling, storage, transport, processing, wholesaling, retailing and export of fish and fishery products as well as accompanying supporting services such as market information, establishment of grades and standards, community trade, financing and price risk management and the institutions involved in performing the above functions.

It is desired to have an efficient and well planned distribution networkso that fish and fishery products move from the place of landing or production to the place of consumption at cheapest cost with quality –intact, ensuring the maximum price realization to the farmers or fish producers. It is really challenging to the public agencies involved to meet the requirements of all three major players, viz., fishermen or fish farmers, consumers and traders.

It includes all activities involved in creation of time, place, form and possession utility. Philip Kotler explained marketing as the science and art of exploring, creating, and delivering value to satisfy the needs of a target market at a profit. ‘Fish marketing’ is different from marketing of other goods and services and even differs a bit from marketing of variousagricultural goods and services.

Key Facts

• Global fish production peaked at about 171 million tonnes (MT) in 2016, with aquaculture representing 47 perc ent of the total and 53 per cent of non-food uses (Global capture fisheries production was 90.9 MT in 2016)

• World fish production is projected to increase by 15% in the next 10 years, reaching around 200 MT per year

• The total first sale value of fisheries and aquaculture production in 2016 was estimated at USD 362 billion, of which USD 232 billion was from aquaculture production

• Fish (including shellfish) provides essential nutrition for 3 billion people and at least 50% of animal protein and minerals to 400 million people from the poorest countries

• 10-12% people, i.e. over 870 million people, depend on fisheries and aquaculture

• Aquaculture is the world’s fastest growing food production system, growing at 7% annually

• Women account for 19% of all people directly engaged in the fisheries and aquaculture sector, and over 50% when including the post-harvest sector

Climate Change: A global externality

Climate Change (CC) is a result of the externality associated with greenhouse gas emissions. It entails costs that are not paid for by those who create the emissions.

Distinguished Features from Other Externalities

• Climate change is global in its causes and consequences;

• The impacts of climate change are long-term and persistent;

• Uncertainties and risks in the economic impact are pervasive;

• There is a serious risk of major, irreversible change with non- marginal economic effects

Definition of Climate Change

Climate change refers to a statistically significant variation in either the mean state of the climate or in its variability, persisting for an extended period (typically decades or longer).

Introduction

Diffusion is the process by which an innovation is communicated through certain channels over time among the members of a social system (Rogers, 1962, 1983, 1995, 2003). It is a broader term, which encompasses unplanned as well as planned and directed spread of an innovation. Dissemination is planned and directed diffusion of an innovation. In case of Integrated pest management which is a complex sort of decision making process, many technology transfer approaches were/are tried for dissemination of IPM technologies to farmers. These include radio, television, print media, training and visit, field days, demonstrations, extension field visits and participatory learning approaches like participatory technology development (PTD) and farmers field school (FFS). While Training and Visit (T&V) system failed, Farmers Field School (FFS) approach of educating farmers followed by ‘Community IPM’ activities and ‘Farmers to Farmer’ approach registered success in IPM implementation in developing countries (Matteson, 2000).

At country level, there is major paradiam shift from cropping systems towards farming system research in XI Plan period. The mandate of Project Directorate for Cropping Systems Research, Modipuram stands changed with focus on Farming Systems and re-named as Project Directorate for Farming Systems Research. w.e.f. 1.4.2009. The All India Co-ordinated Research Project on Cropping Systems with its 69 on-station and on-farm centres representing different agro-climatic zones of the country also stands re-named as AICRP on Integrated Farming Systems. As such, the much needed methodologies and procedures for planning, monitoring and interpretation of farming systems related data are not readily available. Therefore, some methodologies and procedures which can be adopted to execute Farming Systems Research for drawing meaningful conclusions are discussed here.

Introduction

The present study was conducted among the regular Library and Information Science (LIS) professionals working in the eight-state universities in Kerala. Studies conducted on similar topics were collected after that the research design for the present study was developed. The researcher has visited all the selected universities in Kerala and met almost all the LIS professionals to collect the relevant primary data for the study.

The chapter elucidates research methods and techniques employed in the present study to answer the research problem. Research design, selection of variables, research methodology, and data analysis employed in the study are described in this chapter. The methodology adopted in the present investigation to answer the research problem designed for the study is included. 

Abstract

Agroforestry is an integrated self-sustainable land use management system that is not only capable of producing food from marginal agricultural land but also capable of maintaining and improving the quality of environment. It plays a vital role in achieving integrated rural and urban development. But reliable data on number of trees and area under agroforestry is not available as methodology for estimation of even area under agroforestry is not yet standardized. In this paper, a methodology for estimation of number of trees under agroforestry using high resolution satellite data has been proposed and estimation of number of trees as well as area under agroforestry in Ludhiana district of Punjab State has been done using the proposed methodology. Land use/land cover map of the district has also been generated using ERDAS IMAGINE software. It has been observed from the accuracy assessment that the estimates of number of trees as well as area under agroforestry obtained using the proposed methodology under this study are very reliable. Therefore, the proposed methodology may be replicated for estimating number of trees as well as area under agroforestry in other parts of the country.

Keywords: Agroforestry; Estimation of number of trees, Area estimation; Remote Sensing; GIS

The term DNA sequencing refers to methods for determining the order of the nucleotide bases, adenine, guanine, thymine and cytosine, in a molecule of DNA. In molecular terms ,the definitive understanding of a DNA molecule comes from determining its nucleotide sequence.The function of a gene can be deduced from its nucleotide sequence,for example by comparing the sequences of genes with known functions.

The first DNA sequences were obtained by academic researchers, using laborious methods based on 2 – dimensional chromatography in the early 1970s.  Following the development of dye-based sequencing methods with automated analysis, DNA sequencing has become easier and orders of magnitude faster.  Knowledge of DNA sequences of genes and other parts of the genome of organisms have become indispensable for basic research studying biological processes, as well as in applied field like diagnostic or forensic research.  The advent of DNA sequencing has significantly accelerated biological research and discovery.

1. Preparation of diluents 

The diluent is prepared one hour before semen collection so that it is stabilized. The diluent is prepared by mixing the ingredients and kept ready in water bath at 30oC. One of the diluents is detailed below

Participatory curriculum reorientation awareness-raising workshop for key stakeholders: In the present study focus group discussion and workshops were conducted to know the effectiveness of present curriculum of extension education with different stakeholders (Students UG, PG and Ph.D, Extension teachers, Field extension workers and farmers). Data were collected by using schedules regarding the important contents of present curriculum and most important for extension workers in the present situation to be included in curriculum

The study entitled “SHG in Techno Economic Empowerment of Tribal Women” was conducted on the following specific objectives.

Empowerment of women in relation to SHG (ii) Profile of SHG

Structure and functions of SHG

SWOT analysis of SHG

Constraints of SHG and suggestion

Case studies

Collection trips were organized in a planned manner so as to cover every locality in all three seasons. Rural and remote areas which were thus far practically unexplored were surveyed more intensively. Frequency of collection trips was twice a week during first year; once a fortnight in third and once a month in the last and forth years. During the field work, observations on the habit and habitat; flower colour; fragrance; fruiting, colour of the bark and blaze in case of trees and shrubs; dominance and sociability of the collected plants were entered into rough field book. In the mean time information regarding medicinal or other uses, if any, were gathered from local inhabitants, vaidyas and haquims. Plants of small size were uprooted carefully and pressed as such. In case of larger plants, care was taken so that specimens should have flowers, fruits, leaves and stems of young and old stages. At least four specimens, for making herbarium sheets, were pressed at spot after tagging; and a tagged bundle of a few plants was taken in a polythene bag for study in laboratory.

Research methodology is a detailed plan of investigation and the blue print of procedure for carrying out the research. In this chapter, discussion on the methodology has been made to understand the concepts, methods and techniques, which are utilized to design the study, collect information, analyzing data and interpreting the findings for revelation of truth and formulation of theories. The entire chapter has been broken up under following sub-heads for easy understanding:

1. Locale of research
2. Sampling design
3. Pilot study
4. Variables and their measurements
5. Methods of data collection
6. Statistical tools used for analysis of data

1. Introduction

The study of systematics and genetic diversity between or within different species, populations, and individuals is a central task for many disciplines of biological sciences. Systematic studies can indicate which genomes in the plant kingdom to search, sample, and study for the answers to questions relating to the evolution of chemical and physical structures and their synthesis or ontogeny as well as questions about the kinship of the individuals. Such studies would help find new and useful genes and provide information about the phylogenetic relationships among crop species and their wild relatives. The application of molecular markers has been the most active area of research in both animal and plant systematics. The analysis of the genetic variability within and among populations of the species is crucial for understanding their future maintenance and developing improvement as well as conservation programs.

Classical phenotypic characters, such as morphological traits, are still extremely useful but they can sometimes be influenced by environmental conditions. Therefore, during the past decade, classical strategies of evaluating genetic variability such as comparative anatomy, morphology, embryology and physiology have been increasingly complemented by molecular techniques. These include the analysis of chemical constituents (e.g., plant secondary metabolites) and, most importantly, the characterization of macromolecules. The development of molecular markers, which are based on polymorphisms found in proteins or DNA, has greatly facilitated research in a variety of disciplines such as taxonomy, phylogeny, ecology, genetics, and plant breeding (Weising et al. 1995). The greater utility of molecular markers derives from following five inherent properties that distinguish them from morphological markers.

1. Introduction

The objective of algal taxonomic collections is to represent the natural population, flora and diversity in size and form. Therefore, it is important to collect the representative samples seasonally from various habitats. Collection of information about the habitats and other details are also very important. For algal sampling the first thing to consider is how to collect the specimens. The freshwater algae show an ability to tolerate a wide range of environmental condition. Under natural conditions, they usually grow in mixed communities which may include many species and genera. Field study provides information about the site, environment, season and size and shape of the living algal thallus in its natural surroundings. Many algae can be tentatively identified by their appearance, shape and colour of thallus in a particular habitat. Algal population can be sampled in a number of different ways, depending on the nature of the habitat and the location of the algae within the water body. The specimens must be prepared carefully so that important morphological characters are displayed as fully and completely for further researches.

The methodology has been carefully considered in order to comprehend the idea, procedures, and approaches used in the design of the study, information gathering, data analysis, and finding interpretation for the identification of relevant truths and the development of hypotheses. The methodology and a process employed in the study are covered in this chapter.

5.1 Locale of the Research

The rural areas of Darjeeling-Pulbazar CD block, Jorebunglow-SukhiaPokhri CD block in Darjeeling district in West Bengal was selected for the study. The area had been selected for the study because of the availability of appropriate respondents, people as well as the local language.

5.2 Pilot Study

Prior to beginning the actual research, a pilot study was carried out to better understand the regions, its inhabitants, institutions, and programmes activities associated to the migration process in the research area. During the pilot study period, the respondents’ situational and historical data were gathered.

1. Introduction

The word ‘lichen’ has a Greek origin, which was referred to the superficial growth of fungus like organism on the bark of olive trees. Theophrastus, the Father of Botany coined the term ‘lichen’ during 300 BC and introduced this group of plants to the scientific world.

Lichen is a combination of two organisms, an alga and a fungus, living together in symbiotic association. Sometimes instead of an alga a cyanobacterium (blue-green alga) may be present in the lichen thallus. The algal component in the lichen is generally called as ‘photobiont’ as it contains photosynthetic pigment. The fungal part is called as ‘mycobiont’ (myco = fungus). The photobiont and the mycobiont loose their original identity in symbiotic association and the resulting organism is the lichen which behaves as a single organism, both morphologically and physiologically. Hence, the lichen is called as a composite organism. The lichen thallus is made 90% of mycobiont which provides shape, structure and colour to the lichen. In a lichen thallus whatever visible from outside is fungal part, which holds algae inside its body (Fig. 1) and therefore, the lichens are placed within the Kingdom - Fungi. The fungi present in lichens are called as ‘lichenized fungi’. Among the 20,000 lichen species present in the world, 98.9% of them belongs to Ascomycetes group while Bacidiomycetes and Deuteriomycetes groups are represented by only 0.1% and 1%, respectively.

Introduction

Age determination, a fundamental discipline within fisheries biology and ecology, is a critical tool for unraveling the life histories and population dynamics of aquatic species. The ability to accurately estimate the age of individual fish holds immense value in various scientific, management, and conservation contexts.

Seed Production

Systemized crop production is known as seed production. In seed production adequate care is given from the purchase of seeds upto harvest adopting proper seed and crop management techniques. The benefits of seed production are

• Higher income
• Higher quality seed for next sowing

Before carry out any ethnobotanical work, first define the goal of the assignment or study before selecting the approach, which best suits the interests, budget and schedule. Most of the methods used in ethnobotanical studies are time taking and costly because several field trips are required in several seasons for covering different ritual occasions and seasonal farming activities which are continue for a number of years for completion of an assignment. In this way, an assignment may be very long or short as per selection approach of an ethnobotanist. Long-term assignment or projects may be continue for several years and they require sufficient financial input. When sufficient financial add and time does not available to accomplished long term assignments, in that case a Rapid Ethnobotanical Appraisal (REA) can be done.

1. Introduction

Microbial diversity is becoming increasingly essential with the requirement to preserve the integrity, function and long-term sustainability of natural and managed ecosystems. However, our knowledge of the diversity of microbes remains obscure due to lack of appropriate approaches to evaluate the contribution of different components of the soil microbes to ecosystem. This lack of approaches together with the complex and heterogeneous matrix that soil microbes are embedded in, poses great challenges to understand the dynamics of microbial communities in soils (Nautiyal et al. 2010; Chauhan et al. 2013).

In classical terms, diversity is described as the total number of species present, i.e. species richness or species abundance, and the distribution of individuals among those species i.e. species evenness or species equitability. However, the incorporation of these two components into diversity indices has led to much controversy among ecologists (Atlas 1984). The Shannon-Weaver index (Shannon and Weaver 1949) is probably the most widely used index for measuring diversity of a microbial community. But this index, as many others that have been proposed, has its own limitations. A major difficulty is that both richness and evenness play a role in determining the value of the index. Therefore, any diversity index is a single value and thus cannot indicate the total make-up of a community. It is recommended that evenness, richness and diversity values should be calculated in order to obtain an objective assessment of community structure (Atlas 1984). From molecular point of view, diversity often refers to the number of different sequence type present in a habitat e.g. a soil (Ogram 2000). Measuring this type of diversity does not give information about the frequency of individual species, but it can give valuable information about changes in the community structure and species richness in response to changes in the physico-chemical properties of the soil and soil management practices (Nautiyal et al. 2010).

Solid formulations such as dust, wettable powder or granules, the active ingredient is mixed with inert material. The concentration is expressed as:

Active ingredient (%) in the total weight of commercial product.

I. Detection of Castor Husk in Oil Cakes and Oil Seed Meals (Method of ISI, (BIS), IS: 10165-1982)
Principle

The method is based on the fact that castor husk is not bleached under the conditions which cause the bleaching of almost all other materials of vegetable origin likely to be present in an oilcake. The method consists of the treatment of the material with dilute alkali and acid solutions followed by treatment with bleaching powder solution and the isolation of the unbleached castor husk.

Introduction

The main objective in analysing fertilizers is to assess their quality. The analysis examines both their physical and chemical composition. The quality of fertilizers is stated by the manufacturers and, in most countries, it is statutorily notified. Hence, analysis is carried out to determine whether the stated quality meets the statutorily notified standards or not. Together with the statutory notified composition of the fertilizers, the testing methods are specified. In situations where the testing methods are not notified, the prevalent standard methods are followed. Generally, the term fertilizer refers to mineral fertilizers, which are manufactured chemical products of standard composition, while the term manures refers to organic manures, compost, agro-industrial wastes, etc. The compositions of organic fertilizers, unlike mineral fertilizers, are quite variable and, thus, difficult to regulate precisely.

Fertilizer quality is notified in terms of physical and chemical characteristics. The physical parameters include moisture content and particle size. The chemical parameters refer to the amount and form of nutrients, and to various impurities that may be toxic to plants above a critical limit, e.g. biuret in urea. The efficiency of a fertilizer depends on its form of nutrient content. A phosphatic fertilizer may have water-soluble, citrate-soluble, water-insoluble or citrate-insoluble forms of phosphate. A nitrogenous fertilizer may contain ammoniacal, nitrate and amide forms of N in various proportions.

Straw represents a category of low-density feed characterized by a high concentration of structural carbohydrates, specifically cellulose and hemicellulose, while exhibiting low levels of carbohydrates, nitrogen and minerals, along with variable lignin content. Lignin serves as a physical barrier, inhibiting the microbial degradation of these materials. Straw is having low digestibility due to following reasons:
• Reduced voluntary intake due to unappealing taste.
• Low digestibility and nutritional value.
• Nutritional deficiencies, particularly in crude proteins, essential minerals, and vitamins.
• The presence of anti-nutritional components such as lignin, silica, tannins, and oxalates.
The primary aim of treating low-quality roughage includes:
• Enhancing voluntary intake by improving palatability.
• Increasing digestibility to boost the intake of digestible energy.
• Minimizing losses during digestive processes.
• Breaking down cellulose and hemicellulose from lignin and silica to enhance digestibility.
• Expanding the surface area available for microbial action and enzyme activity, thereby improving digestibility.
• Reducing bulkiness through densification.
The processing of low-quality roughages can be achieved through various methods.

Lipids are naturally occurring fat like substances insoluble in water but are soluble in organic solvents like alcohol, ether, and chloroform etc. Some of the phospholipids are even soluble in water. All the lipids do not resemble fats.
Lipids are an important component of living cells. Together with carbohydrates and proteins, lipids are the main constituents of animal cells. Lipids include fatty acids, neutral fats, waxes and steroids (like cortisone). Compound lipids (lipids complexed with another type of chemical compound) comprise the lipoproteins, glycolipids and phospholipids.
Properties of lipids
Lipids are non-polar molecules a family of organic compounds, composed of fats and oils yield high energy and are responsible for different functions within the body. It is stored in the adipose tissue of the body. Lipids are a heterogeneous group of compounds, mainly composed of hydrocarbon chains. Lipids are energy-rich organic molecules, which provide energy for different life processes. Lipids are a class of compounds distinguished by their insolubility in water and solubility in nonpolar solvents. It is important constituent of cell membrane in biological systems, a mechanical barrier that divides a cell from the external environment.
Most of the lipids or fats are demonstrated by using fat soluble dyes. The lipid soluble dyes have greater affinity for fats, lipids, lipoproteins and triglycerides. The fat soluble dyes are:

Introduction and Scope

Plant and soil testing enable scientific assessment of the needs of the plant for nutrient elements and of the capacity of the soil to supply them. The nutrient elements enter the plant in ionic form from the soil solution. Ion transport to the root surface may take place through ion diffusion and bulk transport (mass flow). Mass flow is the sweeping along of ions as water moves to the root. It is particularly important for ions that are not absorbed on soil colloids such as nitrates and sulphates. Because of mass flow, a plant deficient in N can extract all the nitrates from the soil. Potassium, phosphate and the micronutrient cations are absorbed on soil colloids with various degrees of affinity and are greatly retarded in movement with the soil water. Diffusion (movement along a concentration gradient) is the main mode of transport from the solid phase to the root surface for these non-mobile ions. There is also a possibility that some of them are absorbed by a direct exchange of an ion, usually hydrogen, between the root surface and ions absorbed on soil colloids. Most ions are sorbed by the root against a concentration gradient and, thus, the process involves the use of metabolic energy. The fact that nutrient uptake is an active process explains some of its peculiarities. Plants not only accumulate nutrients against a concentration gradient, they are also able to select from the nutrients at the root surface according to their requirements (preferential uptake).

The increasing global emphasis on sustainable and environmentally friendly energy alternatives has placed biofuels at the forefront of green energy innovation. Derived from agricultural biomass and organic waste, biofuels represent a promising substitute for conventional fossil fuels, particularly in agrarian economies where such feedstocks are abundantly available. Agricultural biomass includes crop residues such as rice straw, wheat husk, corn stover, sugarcane bagasse, and oilseed cakes. Meanwhile, organic waste comprises food waste, animal manure, municipal solid waste, and industrial organic residues. Converting these materials into biofuels not only reduces landfill burden and environmental pollution but also cuts down greenhouse gas emissions and promotes the development of rural and circular economies. A variety of biofuels—including biogas, bioethanol, biodiesel, biohydrogen, and syngas—can be produced through two major conversion pathways:
• Biochemical conversion, which involves microbial and enzymatic processes such as fermentation and anaerobic digestion.
• Thermochemical conversion, which includes pyrolysis, gasification, and combustion processes to transform biomass into energy-dense fuels.
Types of Liquid Biofuels
The term biofuel commonly refers to liquid fuels produced from recently living plant material, unlike fossil fuels derived from ancient biomass. Among these, ethanol and biodiesel are the most prevalent forms:
• Ethanol: A type of alcohol produced through fermentation, usually from sugar- or starch-based crops like corn, sugarcane, or cassava. Ethanol is used either as a fuel substitute or blended with gasoline to reduce carbon emissions in vehicles.
• Biodiesel: Produced through the transesterification of oils extracted from plants and seeds (such as soybean, sunflower, or palm), biodiesel is a renewable fuel that can be used in standard diesel engines. It offers a biodegradable, less polluting alternative to petroleum-based diesel.

6.1 Introduction

All separation procedures depend mainly on some physical characteristics of the compounds. It is relatively easy to separate compounds that have significantly different physical characteristics by simple techniques such as solvent extraction. If the various compounds are similar to each other in their molecular size, any slight difference in any one of their physical properties is exploited to achieve separation. The separation and purification of plant constituents is mainly carried out using one or other, or a combination of chromatographic techniques: Paper Chromatography (PC), Thin Layer Chromatography (TLC), Column Chromatography (CC), High Performance Liquid Chromatography (HPTLC), Optimum Performance Laminar Chromatography (OPLC), Gas Liquid Chromatography (GLC) and High Performance Liquid Chromatography (HPLC). One further technique, which has fairly wide application in phytochemistry, is electrophoresis.

All separation procedures depend mainly on some physical characteristics of the compounds. It is relatively easy to separate compounds that have significantly different physical characteristics by simple techniques such as solvent extraction. If the various compounds are similar to each other in their molecular size, any slight difference in any one of their physical properties is exploited to achieve separation. 

Introduction

Soil is the main source of nutrients for the plants. Soil also provides support for plant growth in various ways. Knowledge about soil health and its maintenance is critical to sustaining crop productivity. The health of soils can be assessed by the quality and stand of the crops grown on them. However, this is a general assessment made by the farmers. A scientific assessment is possible through detailed physical, chemical and biological analysis of the soils. Essential plant nutrients such as N, P, K, Ca, Mg and S are called macronutrients, while Fe, Zn, Cu, Mo, Mn, B and Cl are called micronutrients. It is necessary to assess the capacity of a soil to supply nutrients in order to supply the remaining amounts of needed plant nutrients (total crop requirement - soil supply). Thus, soil testing laboratories are considered nerve centres for nutrient management in crop production systems and plantation forestry.

Soils may have large amounts of nutrient reserves in them. All or a part of these reserves may not be of any use to crops because they may not be in plant-available form. For the purpose of estimation or analysis of plant-available soil nutrients, such methods are to be used that have been tested/verified for the correlation of nutrients extracted and their plant availability. This book describes internationally accepted and widely used methods. Apart from nutrients, soil pH estimation is also critical in the assessment of soil health. Generally, plants prefer soils that are close to either side of neutrality. However, there are acid- loving plants and also plants that can withstand high soil alkalinity. Hence, good yields and economic returns from farming are possible in acid and alkali soils. With proper amendments, still higher yields can be obtained in acid and alkali soils. Soil pH also has a considerable influence on the activity of soil micro-flora and on the availability of soil nutrients to crops. It is also important to estimate physical properties such as soil texture, structure, bulk density, soil colour, water content and soil temperature.

Abstract

Estimates of genetic parameters are needed for the prediction of breeding values and planning of selection strategies for desired genetic advancement. Even animal breeders feel lost when confronted with the huge set of different methods. This paper describes an overview of latest methods for the estimation of genetic parameters in a simplest possible way avoiding complex mathematical expressions.

Introduction

Irrigation water always contains some soluble salts irrespective of its source. The suitability of waters for a specific purpose depends on the types and amounts of dissolved salts. Some of the dissolved salts or other constituents may be useful for crops. However, the quality or suitability of waters for irrigation purposes is assessed in terms of the presence of undesirable constituents, and only in limited situations is irrigation water assessed as a source of plant nutrients. Some of the dissolved ions, such as NO₃, are useful for crops.

Sometimes, effluents and domestic sewage water is utilized for irrigating field crops. For using these water safely in the farming system, assessment of undesirable pollutants and organic and microbial constituents with regard to their suitability is fore-most important. Determination of organic constituents is generally carried out under two categories viz., (i) organic substances that quantify an aggregate amount of organic C and (ii) individual or specific organic substances, such as benzene, DDT, methane, phenol and endosulphan. Important determinations are the chemical oxygen demand (COD), which gives the total organic substances, and the biochemical oxygen demand (BOD), which gives the amount of total biodegradable organic substances in the water sample.

Organic material especially, seeds, grains, leaves, fruits and nuts contain prominently three groups of compounds. They are carbohydrates, proteins and fats/oils, mostly in that order. They also contain 3-5% minerals and smaller quantities of vitamins and other minor constituents. Cereal grains contain more of carbohydrates while oilseeds and nuts contain more oil. Tree nuts and even oilseeds may contain 30-50% protein while cereal grains contain 5-8% protein only. The starch and sugar contents of oilseeds may be less than 10% while the oil content of cereal grains ranges around 5%. The actual content and the composition of these groups of compounds really account for their quality as well as commercial value.

Seed is a basic input to raise the crop plants. Healthy seeds produces the healthy crop. However, the seed carries different pathogens either externally or sometimes internally in the seed to affect the seed emergence and healthy seedling growth. Therefore, the seed treatment with fungicides/bactericides, based on the infection of the pathogen, is highly essential to counter the attack and infection of these pathogens to the germinating seedlings.

Introduction

Diseases are a common occurrence on plants, often having a significant economic impact on yield and quality, thus managing diseases is an essential component of production for most crops. These fungicides are used because of three main reasons:

a.To control a disease during the establishment and development of a crop.

b.To increase productivity of a crop and to reduce blemishes.

c.To improve the storage life and quality of harvested plants and produce.

Application Methods

To protect the crop from fungal pathogens, fungicides are applied in various formulations (as dust, granules, gas and most commonly, liquid). They are applied to:

1.Seed treatment

2.Soil treatment

3.Protection of standing crop

Proper selection of a fungicide and its application at the correct dose and the proper time are highly essential for the management of plant diseases. The basic requirement of an application method is that it delivers the fungicide to the site where the active compound will prevent the fungus damaging the plant. The fungicidal application varies according to the nature of the host part diseased and nature of survival and spread of the pathogen. The method which are commonly adopted in the application of the fungicides are discussed

1. Foliar or vegetative application
2. Soil application

Proper selection of a fungicide and its application at the correct dose and the proper time are highly essential for the management of plant diseases. The basic requirement of an application method is that it delivers the fungicide to the site where the active compound will prevent the fungus damaging the plant. The fungicidal application varies according to the nature of the host part diseased and nature of survival and spread of the pathogen. The method which are commonly adopted in the application of the fungicides are discussed.

1.Soil treatment

2.Seed treatment

3.Foliar or vegetative application

The term ‘Ecology’ deals with the study of organisms from all sources and their interaction with surrounding environments. The aim of ecology is, therefore, to understand and also to explain the relationships of all organisms to their environment. In this respect, the duty of the ecologist is to study a particular environment, estimate the population of each species, recognize the communities, and determine their activities and their interactions with both related species, the rest of the community, and their environment. Macroecological studies always initiate by defining the species composition and then proceed to draw certain conclusions on the role of these species in the ecosystem. On the other hand microbial, especially bacterial classical taxonomy (based on isolation techniques and determination of morphology and in vitro biochemical characteristics of isolates) for determination of each species of aquatic bacteria is almost impossible, except in a few cases. Consequently, the microbial ecologist has to depend upon certain methods that can measure the biomass or activity of a very large conglomerate of coexisting microbial taxa in an aquatic environment. Probably, this has caused the very slow development of microbial ecology concepts and application of a general ecological theory to the microbial ecology.