eBook Chapters

1. Introduction

Modern medicine relies heavily on biomaterials and tissue engineering, which are a broad category of materials designed to interact with biological systems in a therapeutic or diagnostic capacity. These materials, which are frequently polymers, natural or synthetic, are made to have particular physical, chemical, and biological characteristics in order to satisfy the demands of a range of medical applications (Holzapfel et al., 2013; Ozdil & Aydin, 2014). These materials can be produced, modified and characterized in a number of ways, according to the particular needs of the application, including 3D printing, molding, and machining (Jandyal et al., 2022). Biomaterials are extensively studied for their applications in tissue engineering, which comprises the recent developments into studying the disease models, micro-scale bone repairing, wound healing and other applications (Purnama et al., 2010). Biomaterial degradation and biocompatibility must be taken into account when developing implants or medical devices since the material's characteristics are tunable according the external or internal parameters. In order to produce biomaterials for use in healthcare applications, cooperation between specialists in biology, medicine, and materials science is needed, the upcoming advances in bioprinting, artificial graft and usage of artificial intelligence might give us an insight towards development in disease regression (Holzapfel et al., 2013; Khan et al., 2015).

The majority of the protein found in the food supply worldwide comes from animal or grain sources, which together account for around half of the total. First of all, fish and crustaceans are significant and excellent providers of amino acids, a form of protein that is essential to nutrition and is only present in trace amounts in cereals and grains. It turns out that these matters for global nutrition and that some low-income, food-deficient nations really benefit from it. Furthermore, fisheries are significant local sources of food, commerce, and revenue in many coastal developing and developed countries. This has prompted researchers and biotechnologists to look at the identification, use, and extraction of these biomaterials in healthcare settings (Raghavendra et al., 2015). The varied fish-derived biomaterials have a variety of uses, including as in tissue engineering, medication delivery, and wound healing, which has opened up new avenues for medical science to make scientific discoveries (Bhat & Kumar, 2013).

Introduction

The modern biotechnologies (animal cloning, stem cells, and transgenesis) have contributed immensely to increasing livestock productivity, particularly in developed countries, and could help to alleviate poverty and hunger, reduce the threats of diseases and ensure environmental sustainability in developing countries. A wide range of biotechnologies are available and have already been used in developing countries in the animal science disciplines, i.e., animal reproduction, genetics and breeding; animal nutrition and production; and animal health. In animal reproduction, genetics and breeding, artificial insemination (AI) has perhaps been the most widely applied animal biotechnology, particularly in combination with cryopreservation, allowing significant genetic improvement for productivity as well as the global dissemination of selected male germplasm. Complementary technologies such as monitoring reproductive hormones, oestrus synchronization and semen sexing can improve the efficiency of AI. Embryo transfer provides the same opportunities for females, albeit on a much smaller scale and at a much greater price. Biotechnologies in animal health are used to increase the precision of disease diagnosis as well as for disease control and treatment. The Biotechnology Industry Organization claims that the genetic engineering of animals in agriculture offers ''tremendous benefit to the animal by enhancing health, well-being and animal welfare'' (Gottlieb and Wheeler 2008). Further, improvements are still needed in product composition and production efficiency, especially in growth, disease resistance, and reproduction. In this regard, transgenic animals stem cells, cloning and other emerging biotechnologies will have important roles in producing more and higher quality animal food.

The foundation of modern insect classification was laid by Brauer in 1885. According to Brauer insects were classified as Subclass: Apterygogenea (pterous) and Pterygogenea (winged) based on:

• Presence or absence of wings.

• Mouthparts.

• Metamorphosis.

• Number of Malpighian tubules.

• The nature of wings.

• Thoracic segments etc.

The earliest classification of insects was based on habits and habitats and on certain gross anatomical features that define the general aspects of different kinds. In classifying insects, not only anatomical characters but also facts pertaining to physiology, biology, distribution, ecology and sometime cytology of the species is taken into consideration.

1 & 3 Assistant Professor, Dept. of Agricultural Extension and Rural Sociology, Agricultural College & Research Institute, Tamil Nadu Agricultural University, Madurai -625 104

2 & 4 Senior Research Fellows, Dept. of Agricultural Extension and Rural Sociology, AC & RI, Madurai -625 104.

Prelude

The rapid and unprecedented changes in the external environment such as liberalisation of the economy, globalisation of international markets, deregulation of the financial systems and implications of various clauses under WTO exerted considerable pressure on the agricultural system. Moreover, the major challenges facing the world today includes are: managing the environment in a sustainable manner, managing the exploding rate of population growth and urbanisation, ensuring food security, meeting health, education and literacy needs and eliminating poverty.

Meeting these challenges requires information, knowledge and participatory process of social change. Communication is an essential element in this process. According to Balit (1996) who pointed out that least expensive input for rural development is knowledge. Knowledge and information are basic ingredients of food security and are essential for facilitating rural development and bringing about social and economic change.

The 21^st century is witnessing a computer revolution in which information processing and retrieval are being reliably done at incredible speeds. Computers are used for storing, analysing and distributing information of all kinds including words, numbers, pictures, illustration, sounds and movies. Computer aided knowledge dissemination mechanism help to reach the unreached and foster new voices and new leaders.

According to Aasher (1995) microcomputer technologies have the potential to support all the major functions of agricultural extension, namely the technology generation, diffusion, adoption continuum and the efficient handling of descriptive, diagnostic, predictive and prescriptive types of information.

Indian horticulture has made a rapid stride, converting the country from food scarce to self sufficiency. The horticulture, which includes fruits, vegetables, spices, flowers and medicinal and aromatic plants, has proved beyond doubt its potentiality for gainful diversification. One of the significant developments is that horticulture has moved from rural confine to commercial production, and this changing scenario has encouraged private sector investment in production system management. Since the growing of fruit crops is highly rewarding to the farmers in terms of returns per unit area, the horticulture sector is expected to contribute significantly for the food and nutritional security, employment opportunity and poverty alleviation.

In recent past, several innovations and new initiatives have been made both in research and development for improving production, productivity, quality and marketing and to identify critical gaps in various emerging areas in fruits & horticulture technology. Some of the brief details are discussed on under:

High yielding superior fruit varieties for commercial cultivation

Mango: The mango varieties have been developed as a national priority at IARI, which are highly popular amongst the fruit growers of India. The important features of these hybrids are summarized below:

A tool is a handheld item that aids in accomplishing a task. It is an instrument or machine that aids in achieving a task. Tools are something you use to do a job. ICT tools that can be used for betterment of Agriculture Research, Education and Extension are discussed here.

    1.    Computer: Computer is an advanced electronic device that takes raw data as input from the users and processes these data under the control of set of instructions (called progamme) and gives the result (output) and saves output for the further use. It can process both numerical and non-numerical (arithmetic and logical) calculations.

Abstract

Plantbreeding is an ancientart practiced throughselection ofplants fordesirable traits. Over a period of time it has evolved into scientific discipline with various methodologiesbasedon theories and principles ofgenetics. Since the rediscovery of Mendel’s law, there has been accelerated increase in yield of various crop plants due to development of high yielding varieties. Conventional approaches of following phenotypic selection from a variable population in early generation followed by yield testing in later generations have been highly successful in most of the crop species. This coupled with hybrid varieties led to significant increase in food-grain production during later half of the 20^th century. At present manycrops are facing yield plateau asthey have reached their maximum genetic potential. The growing condition is also deteriorating due to changing climate. There is an urgent need among breeders to utilize full arsenal of techniques available to them to sustain crop productivity. Molecular markers and marker assisted selection has come as a boon to the breeders to increase the efficiency ofselection in early generation breeding especially for traits whose phenotypic evaluation is difficult. Further, transgenic technology has the potential to incorporate genes from diverse sources, thus enriching the gene pool from which breeders can search for specific traits. Although at present there is skepticism about transgenic crops among public but this may become a viable strategy in future.

Meat processing is the set of methods and techniques used to bring substantial chemical and physical changes in the natural state of meat. These are the methods which are used for making meat and their products attractive, nutritious and marketable as well as for the prolongation of shelf-life. In processing techniques, grinding, chopping, addition of seasoning, alteration techniques for colour, heat treatments etc. are included but cutting, trimming and deboning are not included in processing operations.

History

Meat processing dates back to the prehistoric ages and probably the first processed meat product was sundried meat. Lator it turns to burning of meat over wood fire while salting and smoking of meat was practiced first time in the time of Homer, 850 B.C. In 63B.C.-14 A.D. at the reign of Augustus honey was tried for preservation of meat. Lator various types of cooking such as roasting, smoking, steaming and oven baking came in existance. Salt-preservation was especially common for foods including meat and meat products for warrior and sailor’s diets, until the introduction of canning methods.

Modern food processing technology in the 19th and 20th century was largely developed to serve military needs. In 1809 Nicolus Appert invented a vacuum bottling technique that would supply food for French troops and this contributed to the development of tinning and then canning by Peter Durand in 1810. Although initially expensive and somewhat hazardous due to the lead used in cans. Canned goods would later become a staple around the world. Pasturization discovered by Louis Pasteur in 1862 was a significant advance in ensuring the micro-biological safety of food. In 20^th century, food processing advances with the development of spray drying, freeze drying and the introduction of artificial sweeteners, colouring agents and preservatives such as sodium benzoate. In late 20^th century ready to eat meat food products were introduced to cater the need of consumers.

The paddy grain contains a rough outer covering called husk. It accounts for about one-fifth to one - fourth of the weight of paddy. The inner kernel, called brown rice or dehusked rice, again contains some soft outer layers, jointly called bran. It accounts for about 6-8% of the brown rice weight, including the small germ (1-2% by weight) located in one corner. Rice milling is the process of removing the husk and a part of the bran from paddy in order to produce edible rice. Rice milling system ranges from the home-scale to the large, complex modern rice-processing installations. They include hand-pounding equipment, single hullers, emery sheller-cum-huller mills, emery sheller-cum-cone polisher mills and the modern rubber – roller rice mills. Rice milling industry does not only mill rice but it also carries many other essential functions, such as cleaning and grading, drying, storage, quality control etc. for the production of better quality rice. All these processes are discussed in this paper.

Unlike other food grains, rice is mostly consumed as cooked whole grain, Milling technology is therefore geared to obtain maximum outturn of milled rice and to reduce breakage to the minimum. The single huller mills are by and large located in villages or in localities where paddy is custom milled for produces and they still handle the bulk of the country’s production. The large-capacity rice mills located in urban or semi-urban areas for commercial milling are of ½ to 4 tones per hour capacity and handle the rest of the paddy milled. Some battery hullers are still in operation as large commercial mills, specially for milling parboiled paddy.

Introduction
The 2022 edition of the United Nation’s global forest sector outlook for 2050 presented an update on the current patterns of wood consumption, its rising tendency, and projected future demand of primary processed wood to total 3.1 billion cubic meters of round wood equivalents (FAO, 2022). In addition, up to 199 million m³ would be required to substitute for non-renewable materials. Planted forests contributed around 46 percent to the global industrial round wood supply in 2020. However, globally the supply of wood from planted forests is always lower than the actual demand. Increasing population, urbanisation, economic development and consumption pattern are some of the major driving causes behind the demand in growth of wood and wood products. Wood security is defined as long-term availability of wood and wood products (sawn wood, veneer, plywood, particleboard, pulp, wood fuel and other primary wood products) for domestic and industrial requirements. The deficiency in the wood supply chain will continue to increase, and when the world population touches 9.4 to 10.2 billion, a 22 to 34% increase, the demand-supply imbalance will also increase. This supply gap would result in a shift in consumption patterns and lead to increase in environmentally harmful products such as petroleum-based plastics. Hence to meet the basic wood demand in 2050, at world level an additional 33 million ha of highly productive plantation forest would need to be established to meet the industrial round wood demand (FAO, 2022).
New demands for forest ecosystem continue to surge based on the Sustainable Development Goals, and mitigation of climate change related issues, water and other goods and services. Along with policy measures to directly act on existing forest resources conservation, increase in tree plantations with management interventions to increase productivity is necessary to fulfil the wood supply demands (McMaho and Jackson, 2019). Globally, the area under plantation forestry is on the rise (McEwan et al. 2020). Numerous studies (Silva et al. 2019; Carle et al. 2020; Pinnschmidt et al. 2023), highlight that plantation forests increasingly fulfil the ecological services provided by natural forests. Particularly, short rotation exotic trees with high productivity have found a niche in high-intensity industrial plantations, driving the expansion of the pulp and paper industry into a

Introduction

In view of the accepted importance of analysis, the workload on soil, plant and water testing laboratories has increased considerably in recent years. Therefore, analytical methods have needed to be accelerated through the automation of instruments. Almost all instruments either contain inbuilt computers or can interface directly with micro processors, thereby simplifying instrument operation and providing versatility for the analyst. Most operations can be performed through keyboard commands. This type of instrument automation enables:

For Indian foods

Food processing industries are the fastest growing in India. India is the largest producer of milk, bananas, mangoes, guavas, papaya, ginger and okra. It is the second largest producer of wheat, rice, fruits, vegetables, tea, sugarcane and cashew nut. It is the third largest producer of cereals, coconut, lettuce, chicory, nutmeg, mace, cardamom and pepper at the global level (Highlights of Agriculture Census, 2010-11, http://pib.nic.in/newsite/PrintRelease.aspx?relid=132799). Most part of the income is spent on foods. It is important to establish and nurture mutually beneficial relationships with global food processing, food retail and related supply chain organizations. This will in turn help in the realization of significant business growth opportunities in India, through newer technologies, innovations and ways of value additions. The geographical location of India helps in the export of items to other countries. It is connected to Europe, Middle East and Africa from the western coast and to Japan, Singapore, Thailand, Malaysia, Korea, Australia and New Zealand from the eastern coast. Food processing is a priority sector for the Indian Government, especially in recent times with “Make in India” initiative.The country is considered as one of the most favourable markets because of the easy and affordable credit and other fiscal incentives. The total consumption of food and beverages in India is US$ 369 billion which is expected to increase to US$1.142 trillion and the output in the food processing sector might increase to US$ 958 billion by 2025. This offers a vast market opportunity by the Indian food processing, food retail, transport, logistics and related infrastructure sectors to players in the food processing value chain. The market for plant and machinery in the food processing sector is estimated in the year 2024-25 to be USD 51.41 billion as compared to the current value of USD 17.3 billion (2016-17).

Introduction There are multiple methods or trapping technologies available for pest management in agriculture. Some of the method discussed in literature are described here. Insect pests in an agricultural field can cause damage to the crops by infecting the crops with diseases and thus may affect adverse impact on its quality. Nowadays, farmers set up insect traps like sticky papers that comes in different colours such as yellow, green and blue to monitor the number of pests. Different insects are specifically/ particularly attracted to the colours of the sticky paper commonly such as yellow or blue (Espinoza et al?, 2016).

In addition to the conventional treatment methods i.e., surgery, chemotherapy and radiotherapy, there are some adjuvant targeted therapies which block the growth of cancer by altering the individually expressed specific molecules responsible for tumor cell proliferation, survival, metastasis or microenvironment. The majorly studied adjuvant therapies include use of hormones, tyrosine kinase receptors, anti-cyclooxygenases, anti-tumor suppressor gene p53 and epithelial-mesenchymal transition inhibition.

The main aim of hormonal therapy (Table 2) is to inhibit the hormone induced stimulation of carcinoma cells, which could be achieved either by ovariohysterectomy or different treatments like use of specific estrogen receptor modulators (SERMS), aromatase inhibitors for suppression of estrogen synthesis etc. A commonly used estrogen receptor (ER) antagonist drug tamoxifen for treatment of ER positive breast cancer in women, has also been tested against CMTs. However, it is not a viable treatment option in dogs due to associated side effects. Ovariohysterectomy is considered as a better and practical solution. The use of hormonal therapy in CMTs is based on the evidence of hormone dependency of these tumors as well as lessons learnt from hormonal therapy outcomes from human breast cancer. This therapy significantly ameliorates the recurrence of breast cancers and prolongs the survival rates in women having breast cancers positive for hormone receptors. However, the results of the canine investigations, which are all retrospective and non-randomized, are contradictory. Detailed research and prospective randomized trials, where effect of OHE is studied in context of hormone receptor status, are required to determine the role of hormonal therapy in CMTs.

Abstract

The advent of modern chemical industry has resulted in the release of huge amounts of novel organic compounds, as industrial by-products, pesticides, other agrochemicals etc into the environment. These new compounds tend to resist biodegradation, with potential consequences such as persistence in the environment or bioaccumulation in food chains. Early detection of toxic chemical compounds in the environment, particularly in water, and their biological effects on organisms has therefore become increasingly important. The traditional approach to environmental pollution assessment is based on chemical analytical methods which only provide information about the absolute concentrations of known chemicals in the environmental sample without an adequate interpretation of its toxicity to biota. In order to get more relevant information about environmental pollution risk, it is therefore inevitable to supplement the chemical analytical data with the results of methods providing information on biological impacts. The negative biological effects of pollutants present in all kinds of environmental samples can be assessed using different living organisms or cells as ‘analytical devices’. The biological response following the exposure of living organisms or cells to environmental sample usually gives an information on toxicity, genotoxicity, estrogenicity etc. of the whole mixture of chemical compounds. According to the technical principle, methods of biological monitoring can be classified to bioassays, biosensors, immunoassays, and ecological methods. Besides being sensitive only to the bioavailable fraction of pollutants, biotests also have the power to assess the integrated effect of interacting chemical compounds and to detect the compounds, which are toxic only due to bioactivation.

9.1. Molecular breeding and marker assisted selection

Using conventional breeding, developing new varieties takes atleast 15-20 years.

Molecular breeding shortened the time to 7-10 years.

One of the tools for faster variety development is Marker Assisted Selection (MAS).

MAS-refers to use of DNA markers to assist phenotypic screening.

Plants that possess particular genes or quantitative trait loci (QTL) may be identified based on their genotype rather than their phenotype.

Introduction

Diagnosis of cancer has always been challenging. There is no single diagnostic test to confirm the cancer. A detailed evaluation of the patient comprises of history, physical examination and various diagnostic tests.

Most common steps in the diagnosis involve physical examination, imaging tests, laboratory tests, biopsy etc. Other than these there are several other battery of tests that are followed in modern diagnostics. The main aim of the diagnosis is to determine what type of cancer and more importantly the stage and the grade. Early detection of cancer provides cure or better chances of survival in any patient. It improves the prognosis of cancer and potentiate the effect of targeted therapy. There are several moderndiagnostic techniques like 2D and 3D imaging using PET positron emission tomography, MRI, Computed Tomography (CT), X Rayimaging and ultrasound scanning. The diagnosis of tumor involves several steps.

Introduction
Maize (Zea mays L.) is the second most widely crop grown globally after wheat, with 205 million hectares under cultivation. The area cultivated under maize is steadily increasing and expected to overtake that of wheat by 2030 (Erenstein et al., 2022). With production exceeding 1.2 billion metric tons, maize surpasses the production of other highly cultivated cereals like wheat and rice mainly due to its higher yields (Erenstein et al., 2022). Maize is cultivated in the Americas, Africa, and Asia, for multiple end-uses (Nuss and Tanumihardjo, 2010). It is a staple food in several countries across Africa and Latin America, and in a few countries in Asia, with an overall contribution of 15-20% of daily calorific needs (Shiferaw et al., 2011).
The global maize yield tripled from the 1960s with the average yield rising from 2 tons/ha to the current 5.8 tons/ha, mainly due to the adoption of highyielding hybrid cultivars and complementary input use (Erenstein et al., 2022). Maize is naturally an outcrossing species and inbreeding is unnatural. When maize is subjected to inbreeding and the resulting inbred lines from genetically distant backgrounds are crossed, hybrid vigor or heterosis is realized (Springer and Stupar, 2007). Hence, the development of the homozygous inbred lines is a very important step in hybrid maize breeding.
In the well-evolved maize breeding programs, the germplasm is well characterized into different heterotic groups where the hybrids developed by crossing inbred lines from different heterotic groups exhibit high heterosis (Ertiro et al., 2017a; Sang et al., 2022). For the development of inbred lines, maize breeders develop F1 populations by crossing two inbred lines within the same heterotic group (Prigge et al., 2011; Sang et al., 2022). Inbred lines are developed from the F1 population by recurrent self-pollination for 6-8 generations; this can take up to 3-4 years or even more, depending on the availability of off-season nurseries for generation advancement. The resulting inbred lines are highly homozygous (~98-99%), but not 100% homozygous. The doubled haploid (DH) technology emerged as a viable alternative to the time-consuming and resourceintensive recurrent selfing method to produce 100% homozygous inbred lines in just two crop seasons (Prasanna et al., 2012; Chaikam et al., 2019a).
In addition to significantly reducing the time taken to develop homozygous lines, the use of DH lines in maize breeding offers several other benefits: a) As DH lines are completely homozygous at all loci, they are stable and do not show further inbreeding depression; b) DH lines are also best suited for evaluating distinctness, uniformity and stability (DUS) criteria, thereby better facilitating plant variety registration and intellectual property protection (Röber et al., 2005); c) The use of DH lines facilitates selections on completely homozygous lines which is more reliable and effective compared to selections on segregating families with different levels of heterozygosity (Chaikam et al., 2019a); d) Use of DH lines also simplifies breeding operations like planting, managing the nurseries, seed shipments, record keeping, etc. as selfing nurseries spread over several generations are replaced by just two generations for DH line development (Prasanna, 2012; Röber et al.,

Cultivated plants in general including the spice crops observed today have been evolved through selections from their weedy and wild types. Apart from this, there had been another force which could bring the wild forms into cultivated forms named human intervention which is actually the process of domestication. Natural mutations and genetic recombination after selfing and crossing also played a significant role in the entire process. Whereas, natural forces take a long time to come into act, the techniques of plant breeding was devised and fine tuned throughout passing of times, essentially to accelerate the speed of evolution using these natural phenomenons. It was, therefore, mandatory for us to know the modes of reproduction and pollination to create variability in natural population and make all thise happen to what we see today in organised cultivated forms. Moreover, knowledge on reproduction of different plant species helps the breeder to choose the right breeding procedure to be used for crop improvement. Modes of reproduction help to evaluate the genetic constitution of crop plants by determining the extent of homozygosity or heterozygosity which, in turn, are unanimously applicable to any plant. To comprehend modes of reproduction in spice crops effectively, understanding about the floral biology is absolutely necessary. Plant reproduction, a process by which one species gives birth to its offsprings, may be of two types

Allele-Specific PCR

This diagnostic or cloning technique is used to identify or utilize single- nucleotide polymorphisms (SNPs) (single base differences in DNA). It requires prior knowledge of a DNA sequence, including differences between alleles, and uses primers whose 3' ends encompass the SNP. PCR amplification under stringent conditions is much less efficient in the presence of a mismatch between template and primer, so successful amplification with an SNP-specific primer signals presence of the specific SNP in a sequence.

Amplification Refractive Mutation System (ARMS) - PCR

In ARMS, the primer pair is designed so that one of the 3' ends coincides with a variant nucleotide in the target sequence. When the primer mismatches the template the frequency of extension is very low and consequently the effective number of sequence copies available for amplification is greatly reduced. ARMS PCR exploits a thermostable polymerase that lacks 3' exonuclease activity (usually Taq polymerase). Such enzymes extend primers bound to their target sequences very inefficiently when the 3' base is mismatched. Because the 3' exonuclease activity required for mismatch repair is not present, the extension of such primers in PCR is a rare event and amplification is retarded. However, once mismatch extension has occurred amplification proceeds normally from the newly synthesised target strand. Thus an important principle of ARMS is that non-matching (i.e. non-matching at only the 3' end of one primer) template may be amplified. The factors that contribute to this apparent ‘failure’ of ARMS are that when very high numbers of template molecules are added to the reaction, amplification is likely to proceed because the small proportion of mismatched primer extensions reach the sensitivity threshold of the reaction. Second, certain mismatches are extended more efficiently than others so that proportion extended in each PCR cycle varies.

During most of the years, there will be loss of agricultural production by at least 15 to 20 per cent per annum due to unfavourable weather situations. The farmers practicing agriculture expect uniform returns every year as the investment costs are much higher and cannot afford loss in production. Of late, the inter-seasonal and intra seasonal variations in weather are very frequent. The weather conditions observed were found to exceed even beyond known limits. Exceptional deviation from any one single weather parameter like air temperature, rainfall and wind can trigger considerable loss in production or sometimes even crop failure (Fig.12.1). Fig. 12.1: Components of a microclimate and its interlinkages Large scale weather modification is not practicable to a greater extent as uniform results cannot be expected under these conditions. There is need to explore cost effective management options that may significantly alter some weather parameter that is detrimental to crop production at field level by the farmers themselves. Therefore, microclimatic modification is an emerging technology to alter or change the unfavourable weather conditions detrimental to crop growth using cost effective and easily manageable techniques for minimizing the loss in crop production. The options for microclimatic modification have to be decided based on whether and the nature of weather aberrations. For example, dry spells are most common during rainy season in most of the arid and semi-arid regions. The farmers growing crops under rainfed conditions suffer considerable loss in production due to occurrence of dry spells as the crop experiences moisture stress. These dry spells may occur any time during the growing season. In such situations, the farmer needs to adopt a management option even before sowing a crop. Sometimes, the occurrence of weather aberration cannot be anticipated and the farmer has to prepare for adopting a management option based on weather forecast. Such measures are temporary and needs to be adopted to ward off the unfavourable weather conditions to a certain extent. Microclimatic modification can be a permanent, seasonal or temporary option depending upon the climate of the region. The crop microclimate refers to the climate just above and within the crop canopy and in the soil root zone that can be influenced by the day-today management practices. Microclimate modification is a measure to change or regulate the weather parameter at farm level. The microclimate management option also depends upon the nature and type of the soil as well.

Abstract

Tremendous hike inworld population has increased thrust on the limited resources which has considerably affected the viability of the food. The emerging challenge for policy makers and food scientists is to put forward viable solutions. Utilization of underutilized crops/plants that act as good sources of starch could be explored in a better way for the sustenance of the limited sources like food crops/plants. The demand for starch and the foods containing starch has been increasing continually. Since, the starch in its native form has certain limitations in its functional properties to be used for different applications. Therefore, it becomes important to explore certain technologies which could be used for modification of starch. Among different technologies gamma irradiation ensures food safety while inducing physicochemical changes of the components. Although, the chemical modifications have been used widely so far but the concerns related to the chemical residues left are diminishing their demand. Hence, the physical processes particularly the gamma irradiation process has emerged as an efficient alternative with some benefits over other process like eco-friendly, economical, reliable and safe for altering the physico-chemical and biological characteristics of the product. Gamma Irradiation of starch has been successfully employed for the achievement of some desired physico-chemical, biological and functional properties of the foods and other related items. In this chapter, valuable impact of gamma irradiation on the physico-chemical, biological and functional properties of starch has been summarized.

13.1 Biopolymer-Based Coatings with Antimicrobial Properties 13.1.1 Understanding Biopolymer-Based Coatings Biopolymer-based coatings are a game-changer in food packaging, offering natural, sustainable solutions for food safety. These coatings, derived from renewable sources, like polysaccharides (e.g., chitosan, starch, cellulose), proteins (casein, gelatin), and lipids (wax, shellac), have proven to be biodegradable and consumer-friendly alternatives to synthetic polymers. 13.1.2 Antimicrobial Properties and How They Work • Antimicrobial coatings are crucial in slowing down spoilage and extending the shelf life of perishable foods. They work by disrupting cell membranes, inhibiting cell processes, and creating oxidative stress in microbes. This is achieved through natural antimicrobials like essential oils (e.g., oregano, thyme, clove), plant extracts, and organic acids; inorganic agents like silver nanoparticles, zinc oxide, and titanium dioxide; and microbial-derived substances like nisin, lysozyme, and bacteriocins (Yu, Z et al ., 2022)

Studies have shown that modified atmosphere packaging (MAP), and controlled atmosphere storage have the ability to delay quality losses and thus extend shelf life of fresh or minimally processed or fresh-cut produce (Church 1994; Gil et al. 1996a, b; Lee et al. 1995). Modified atmosphere packaging of fruits can result in reduction of respiratory activity, delay in softening and ripening and a reduced incidence of various physiological disorders and pathogenic infestations (Artés 1993).

9.1. Introduction

In a fast-paced world, demand for pre-cooked, fresh-like, and convenient products without preservatives is increasing. This demand has triggered the need for better alternative packaging materials for food products like MAP (Modified Atmosphere Packaging), CAP (Controlled Atmosphere Packaging), edible packaging, biodegradable packaging, etc. Packaging plays a crucial role in transport, distribution, storage, retailing, and end-use, a means of ensuring safe delivery to the ultimate consumer in sound conditions at optimum cost. It performs the functions depicted in Fig.1 for both fresh as well as processed products (Opara et al., 2007; Opara, 2009).

Clsssification

Fracture of upper third humerus, shoulder dislocation and scapula has been grouped under highest level fracture. (Fig.1)

Purpose

To know the method of casting the highest level fracture by modified valeau sling application.

Requirement

Thick 8 layer cotton padding, adhesive gum, 6"-8" long bandage rolls.

Indication: Highest level fracture (femur fracture) (Fig. 1)

Treatment: Modified Velpeau Sling application

Requisite

Adhesive gum

Damage Cloth

Abstract

The agricultural scientists particularly those who are in advisory service, irrespective of specialization, are often approached by the farmers with diseased samples of their crops and sought advice on plant protection strategy. The strategy includes components of control measures, doses, mode and time of application. In the present article different steps of formulation of plant disease control strategy are discussed. To further elaborate the contents, examples from integrated management strategy of mango malformation disease is cited.

Keyword: Mango Malformation

Introduction

Mango malformation, disease was first time reported from Darbhanga District of Bihar State in 1891 by G. Watt. The disease is currently prevalent in almost all the mango growing country and is thus designated as the plant disease of International importance and previously considered to be a serious problem in the northern parts of the country, has now started to appear in central India too in severe form. It is well known, the mango malformation is the most serious disease, rendering mango cultivation non-lucrative in subcontinent and other regions of the world (Ahmad et al., 2002; Ploetz, 2001). Mango malformation caused by fungus Fusarium moniliforme var. Subglutinans, are proved (Freeman 1999; Zheng and Ploetz, 2002). Recently, these isolates were described as members of a new species, F. mangiferae Britz, Wingfield and Marasas sp nov. (Britz et al., 2002). The casual organism of mango malformation grows well at lower temperature and higher relative humidity. The disease is quite common in both grafted and the seedling plants (Kumar and Chakrabarti, 1997). The symptoms manifest as bunchy top (BT) in 4-5 month old seedlings in the nursery, vegetative malformation (VM) of twigs arising from axillary buds and malformation of inflorescence (MF). Normally floral malformation is more prevalent in bearing trees than vegetative malformation. Flowers in the malformed panicle are much enlarged and crowded with hypertrophied axes of the panicle. Malformed inflorescences/ panicle of different varieties were variable in respect of their shapes, sizes, growth and compactness, depending upon the cellular structure and physiology under environmental factors (Chakrabarti et al., 1990). Generally malformed inflorescences produce no fruit, or abort already stages (Schloser, 1971) and is directly responsible for reduction in yield (Kumar et al., 1993 and Singh et al., 1998). In the present study the incidence of Floral malformation on a large number of mango cultivars was recorded over a period of 5 years with a view to identify the entries of future resistant breeding programme.

17.1 Modules

• A module is a file containing python definitions and statements.

• A python module is (.py file) containing variables, class definitions, statement and function related to a particular task. The major feature of having module is that its content can be reused in other programs, without having to rewrite or recreate them.

• They are executed only the first time the module name is encounter in an import statement.

Type of modules:

• User defined modules

• Built-in modules

Ex.-array, math, numpy, sys, etc.

8.1. Documented ITKs on Moisture Conservation

The ITKs were documented under following specific categories

• Agronomic Measures
• Tillage
• Bunding & Terracing (Mech. & Vegetative barrier)
• Land Configuration
• Soil Amendment / Mulching
• Erosion Control & Runoff Diversion Structures
• Water Harvesting, Seepage Control & Ground Water Recharge

India is an agricultural country. The geographical area of India is about 328 mha out of which 147 mha of land under cultivation and 84-mha land is under irrigation. The population is increasing at an alarming rate that requires producing more food for the growing population. This problem can be solved either by increasing the land under irrigation or using different soil water conservation techniques. It is well known fact that during rainfall a considerable amount of water goes to sea due to high rate of runoff. It is highly needed to trap as much as water falling in the form of rainfall and recharge the groundwater so that it is made available for irrigation purposes.

Moisture plays by far the most important role in soils as regards vegetation. It is through the medium of water that the plants obtain their quota of mineral food vital for their growth. If water is gradually withheld from the soil, at a certain stage, the plant will begin to wilt and soon dry up. The soil may still contain some moisture but the plant is unable to make use of it. The minimum moisture in the soil below which wilting will take place is called the Wilting Coefficient and at one time great importance was attached to it. The determination of this Coefficient, however, is tedius. One must grow a number of plants and slowly watch them wilt and determine the moisture content at that point. Moisture content of the soil is determined by heating a weighed quantity of the sample in an oven kept at 100-110 ^oC. The moisture is expressed as percentage on the oven-dry soil.

Clouds play very important role on weather and climate. The formation of clouds takes place when water condenses in the sky. Clouds are visible accumulation of tiny water droplets and ice crystals in the Earth’s atmosphere. The moisture is always present in the atmosphere though it may not be visible. Clouds form when air becomes cooler until the water vapour present in it condenses to liquid form. The condensation over oceans occurs around solid particles like salt, dust, smoke etc. suspended in the atmosphere. The type of clouds depends upon temperature and wind. The clouds are classified based on physical appearance and the height at which clouds are formed (Fig. 7.1).

Term moisture stress is generally applied to the stomata opening and transpiration increases with time until they close due to high temperature.

5.1. Causes of moisture stress in plants

Main reason is extent of transpiration which is affected by leaf size and composition, size and distribution of stomata on leaf, atmospheric humidity, temperature, wind velocity and day length.

High atmospheric temperature due to intense sun and increased transpiration causes closure of stomata and wilting of leaves even, if soil moisture content is not limiting.

This deficit is made up during night due to decreased transpiration.

In plants, moisture content decreases either due to increased transpiration or reduction in absorption or both.

Abstract

Anantapur is the driest district of Andhra Pradesh and hence, agriculture conditions are very often precarious. Groundnut grows where other crops fail and thus it is the predominant crop of Anantapur district. Groundnut is grown in about 7.5 lakh ha in Anantapur district; however the average yields are low at 500 kg ha^-1. Among various available vegetation indices, normalised difference vegetation index (NDVI) is widely used for all reasons, which is a single numerical indicator of presence and condition of green vegetation. NDVI mapping at a regional scale helps to assess the spatial changes in the vigour of green vegetation and thus occurrence of any moisture stress. Climate tools have a great role in understanding the crop performance and estimating the yields. This study was taken up by using freely available MODIS data to understand NDVI in terms of abiotic stresses over Anantapur district and linking with the actual rainfall conditions, groundnut crop acreage and production. Results indicate that low groundnut yields in general could be related to NDVI-based stress measurements and rainfall quantum and distribution in the area however, with a few exceptions. It is hoped that by combining improved practices through IWM with climate-adapted crop varieties, rainfed farmers of Anantapur district can sustain their crop production under present climate variability and become resilient to future climate change.

Keywords: Climate, MODIS, NDVI, Anantapur, Groundnut, Integrated Watershed Management

Extraction of DNA from Tissue
(Using HiPurATM Multi-sample DNA Purification Kit)
Kit contents
Re-suspension buffer, Lysis solution, Prewash solution concentrate, Wash solution concentrate, Elution buffer, Proteinase K, HiElute Miniprep Spin Column (Capped), Collection tubes (uncapped), Collection tubes Dilute the prewash, wash solution and Proteinase K according to the kit.
Protocol
Prepare tissue
Weigh 25 mg of tissue, add approximately 3 ml of 0.8 per cent of normal saline. Homogenize the tissue with homogenizer or with mortar and pestle. Transfer the homogenized tissue with saline to a microcentrifuge tube. Centrifuge at 14000 rpm for 10 minutes. Discard the supernatant and use the pelleted tissue for further lysis.
Digest tissue
Add 180 μl of resuspension buffer and 20 μl of Proteinase K solution to the pelleted tissue in microcentrifuge tube. Mix by vortexing. Incubate the sample at 55oC until the tissue is completely digested (2-4 hours) in a shaking water bath. Vortex briefly after complete digestion.

MOLECULAR BREEDING

Molecular breeding is the application of molecular biology tools, often in plant breeding.

Genetic markers

Genetic marker is defined as a gene whose phenotypic expression is usually easily discerned, used to identify an individual or a cell that carries it, or as a probe to mark a nucleus, chromosomes or locus (King and Stansfield, 1990). Three broad classes of genetic markers are morphological markers, biochemical markers and DNA or molecular markers.
 
(1) Morphological markers

Morphological markers are based on the visually assessable traits viz., morphological and agronomic traits. However, they are limited in number.

MOLECULAR BREEDING

Molecular breeding is the application of molecular biology tools, often in plant breeding.

Genetic markers

Genetic marker is defined as a gene whose phenotypic expression is usually easily discerned, used to identify an individual or a cell that carries it, or as a probe to mark a nucleus, chromosomes or locus (King and Stansfield, 1990). Three broad classes of genetic markers are morphological markers, biochemical markers and DNA or molecular markers.

(1) Morphological markers

Morphological markers are based on the visually assessable traits viz., morphological and agronomic traits. However, they are limited in number.

Features of morphological markers

i.They are easy to identify, there is no need of any complex analysis. Trait of interest can be identified visually.

ii.Morphological markers are inherited qualitatively or quantitatively.

iii.Frequency of availability of morphological markers is less in number i.e., morphological markers may not be available for all the traits of interest.

iv.They are influenced by environment.

v.Since they are influenced by environment, they are unstable in inheritance.

vi.They are stage specific i.e., a particular marker will be useful to identify in a particular stage of plant and not any stage of the plant.

vii.They are influenced by genotype and developmental stages of the plant.

Besides drawbacks, the morphological markers are useful to the plant breeders for the selection purpose in certain situation.

Introduction
The most extensive diversity is found in the realms of plants and insects, encompassing over 1 million arthropod taxa, primarily comprising insects, which have been comprehensively described, along with more than 350,000 plant taxa. Notably, a substantial portion of the described insect species serve as either pollinators or herbivores. Over millions of years, insects and plants have coevolved, constantly adjusting and adapting to each other’s characteristics. Plants have developed numerous morphological and biochemical features to withstand damage from insects, while in response, insects have evolved a range of defensive and adaptive mechanisms. These mechanisms include behavioural, morphological, physiological, biochemical, and genetic traits, enabling them to either tolerate or adapt to the defensive traits of plants (Schmelz et al., 2006; Wu et al., 2007; Howe & Jander, 2008; War et al., 2018). Plant defenses against insect pests can be broadly categorized into two main types: antibiosis and antixenosis resistance. Antibiosis involves the direct impact of plant defensive traits on insect growth, development, and survival. In contrast, antixenosis defense relies on morphological or chemical factors that alter insect behaviour, deterring them from feeding and laying eggs on the plant. The trichomes, spines, cuticles, thorns, and lignified cell walls, are the morphological traits of defense that directly protect plants from insect pests. The biochemical defense mechanisms are typically activated in response to insect attacks and are characterized by their dynamic nature (War et al., 2018). Plant volatiles serve a significant function in the indirect defense of plants against insect herbivores. They accomplish this by either deterring the insect pests or by luring the pests’ natural adversaries. Among the various attributes associated with plant defense, chemical barriers, whether they are induced by stress or present constitutively, along with the nutritional composition of the plant, are regarded as particularly crucial for impeding insect growth and development (Peters & Constabel, 2002; War et al., 2019).
Chemical resistance entails the production of secondary metabolites, whether inherently present (constitutive) or induced as a response to a threat, to fortify the plant’s defense mechanisms (Figure 1). Constitutive defense metabolites, initially stored in an inactive state, referred to as phytoanticipins, become activated when herbivores attack. This activation is facilitated by the enzyme ß-glucosidase, which subsequently triggers the release of various aglycone metabolites possessing biocidal properties (Morant et al., 2008). Metabolites that are induced in response to herbivore activity are referred to as phytoalexins. These compounds encompass a variety of substances such as isoflavonoids, terpenoids, alkaloids, and more. They are recognized for their capacity to influence the growth and viability of herbivorous organisms (Walling, 2000). Furthermore, a notable role in imparting host-plant

Introduction

Livestock contribute directly to the livelihoods of nearly one billion of the world’s population. Livestock provide protein and minerals for human consumption, manure for crop production, and fibre and leather for industrial uses. Animals are also a source of draught power. Beyond their role of providing food and inputs for agriculture and industry, livestock provide security to farmers in developing countries, especially in emergencies such as crop failure. To many of the resource-poor, both smallholder farmers and landless livestock keepers, animals are a living bank, facilitating both income distribution and savings. In addition, by consuming crop residues and by-products, in addition to well-managed grazing, livestock production contributes positively to the environment, particularly in mixed crop-livestock production systems. Thus, livestock are an important source of income and employment that contribute to poverty alleviation and enhance the household food security of farmers.

INTRODUCTION

Molecular tools generally refer to molecular genetic tools. Although the first use of these tools began more than four decades ago, whenLewontin & Hubby (1966) used allozymes to find out the amount of genetic variation present in wild populations of Drosophila, the lack of expertise and high cost of these tools have prevented their widespread use among ecologists in general and behavioural ecologists in particular. But recently the accessibility and costs of these techniques have come down a lot and with the right kind of collaboration, lack of expertise is no longer an issue.

As was mentioned above, the Lewontin & Hubby’s (1966) investigation was done using allozymes. Although still an option, user-friendly neutral nucleotide markers are more preferred by investigators nowadays. The discovery of the polymerase chain reaction (PCR) in 1983 by Kary Mullis was the single landmark in this field, if one has to mention one. The use of molecular markers has totally revolutionized the field of ecology. It has provided ecologists the tool to ask questions, which were hitherto impossible to tackle and also to answer questions with much more precision and accuracy than was possible till now. It has toppled long held beliefs, sometimes, romantic ones, by ecologists.

Introduction
Infectious diseases in aquaculture are becoming increasingly important to address to support the growth and sustainability of the industry. This is especially true as many view farmed seafood production as a key solution for feeding the world’s growing population and reducing poverty in numerous countries (FAO, 2016). It is essential to establish biosecurity programs that effectively prevent, manage, and eliminate diseases within aquaculture operations. Biosecurity plays a critical role in safeguarding agriculture and aquaculture operations from the devastating effects of disease outbreaks. These programs are critical to safeguarding the health of aquatic species, protecting ecosystems, and ensuring the sustainability of the industry. At first, implementing biosecurity measures in aquaculture may seem like a simple concept. The well-known saying “prevention is better than cure” is especially relevant to aquaculture diseases, given the significant economic consequences of disease outbreaks. Effective biosecurity practices can help prevent these costly issues from arising. Biosecurity is a comprehensive and coordinated strategy that includes policies and regulations designed to assess and manage risks across various sectors, such as food safety, animal health, and plant health, while also addressing related environmental risks. Biosecurity measures focus on preventive practices such as quarantine, hygiene protocols, and environmental management.

Abstract

Nitrogen is the most essential nutrient for all plants and is also the major limiting factor in plant productivity. High yielding varieties of all crops are responsive to nitrogen but its ever-increasing use has shown detrimental impact on the environment along with extremely low use efficiency. Nitrogen use efficiency (NUE) in crop plants depends on various internal and external factors, which are dealt in detail. There has been a significant interest in genetic engineering of the crops to improve NUE. The use of biotechnological interventions by manipulating genes of the nitrogen utilization pathway to improve NUE has not been very successful. But transgenics/mutants with modified capacities for nitrate uptake, assimilation and remobilization have enhanced our understanding of the genetic control of NUE. In both cellular, and at whole plant level the mechanisms involved in N remobilization from the senescing organs towards the grain have recently gained importance but their understanding is still preliminary. Recent evidences have shown that grain filling during later stages of crop growth is supported by N recycling.

Although thousands of plant species exist on the earth, only those that were found to be useful for humans as food, feed, fiber, timber and other utility materials have been selected for domestication. When these plant species were affected by various biotic and abiotic causes, the necessity arose to determine the ways and means of protecting the valuable plants species and to understand the host plant defense mechanisms and pathogenic potential of the microbial pathogens causing enormous losses to the cultivators. All plant species have built-in resistance to most microbial plant pathogens existing in the environment. Susceptibility of plants to some of them is an exception, since they are endowed with genes which effectively nullify the possible adverse conditions created by the microorganism. Likewise, microbial pathogens possess genes for survival and pathogenicity to survive in the absence of susceptible plant species and to successfully establish infection in suitable plant species. The microbial pathogens have evolved highly specialized tactics to overcome the defense responses and to rapidly multiply in plants for their survival and perpetuation in a geographic location / ecosystem

Introduction
• Arrival of the nerve stimulus at the motor end plate result in reversal of the polarization of the sarcolemmal surfaces and the muscle gets activated
• This causes momentarily loss of potassium and sodium ions impermeability by the sarcolemma and Ca++ ions combined with calsequestrin in the sarcotubular system gets dissociated bringing Ca++ ion equilibrium with the sarcoplasm
• The junctional foot protein (JFP) and the L-type calcium channel (LTC) are the two big protein complexes responsible for the calcium release mechanism (Fig. 10.1)
• This leads to increase in level of Ca++ ion from nearly 0.10 mM to 10 mM
• Thus, troponin C, the calcium-binding site of the troponin complex becomes saturated bringing a structural modification resulting in interaction of actin with the MgATP2- on the H-meromyosin heads of the myosin molecule as the troponin I, the inhibitory protein, no more inhibits this interaction
• The interaction of actin with the MgATP2- intensely activate contractile ATP-ase near the bonding leading to break down of MgATP2- to MgADP– at a greater rate and liberating energy for inward (towards the sarcomere center) pulling of the actin filament
• This leads to breaking of bond between actin and myosin and thus, the myofibrillar part involved in above mentioned activity gets contracted

• General considerations

 • Polyacrylamide gel electrophoresis (PAGE)

 • SDS-polyacrylamide gel electrophoresis (SDS PAGE)

• Nucleic acid hybridization

 • Radio labelled probes

 • Biotin labelled probes

 • DNA finger printing

 • Polymerase chain reaction (PCR)

 • Reverse transcriptase polymerase chain reaction (RT PCR)

The shift from vegetative to reproductive phase in plants is the result of multiple gene cascades in response to photoperiodic and temperature dependent pathways, gibberellic acid pathway, vernalization pathway and autonomous pathway. The environmental cues are initially detected in the leaves and the mRNA of the flowering signal integrator FT gene, moving to the shoot apical meristem, acts as a long-distance signal for floral meristem identity. At SAM, FT-FD protein complex, based on signals from above said pathways in association with the signals from age-dependent and miRNA pathways, leads to the activation of master regulator gene of flowering AP1. The activation of genes involved in ABCDE model of floral organ differentiation, based on the directions of various cadastral genes lead to the development of floral organs. Thus, the sequential action of floral meristem identity genes, floral organ developmental genes, floral meristem size and organ number genes, floral organ pattern genes and cadastral genes leads to the flower development. This chapter sums up the gene interactions happening in leaf and SAM, leading to the development of a complete flower.

Introduction

Biochemical techniques are fundamental tools that allow scientists to investigate the molecular intricacies of biological systems, including DNA, RNA, and proteins. These techniques are essential for understanding cellular processes, genetic functions, and disease mechanisms. By employing biochemical methods, researchers can dissect complex biological systems at the molecular, cellular, and genomic levels, paving the way for advances in basic biology and therapeutic interventions.

Introduction to Molecular Biology Techniques Molecular biology is the domain of biology concerned with DNA replication, RNA synthesis (transcription), translation, and the role of proteins in cellular function, while molecular biology techniques are the keystones of modern biology, facilitating scientists to decode these molecular foundations of life. These molecular techniques aim to analyze and understand the structure, function, and interactions of biomolecules such as DNA, RNA, and proteins. These techniques facilitate an understanding of complex life processes such as gene expression, genetic variations, and cellular mechanisms. Researchers have used these molecular tools to unravel complex biological processes from genetic inheritance to cellular signaling pathways. The knowledge gained has been applied to solve challenges in various domains of biological science such as medicine, agriculture, and environmental science. During 1960’s methods to identify, isolate and manipulate molecular components were developed by molecular biologists. The field of molecular biology emerged in mid 20th century, driven by groundbreaking discoveries such as the deduction of the double-helix of DNA