eChapters

Nanotechnology-based preservation employs materials generally measuring between 1 and 100 nanometres. Their high surface-area-to-volume ratio, adjustable surface chemistry and responsiveness to external stimuli enable highly controlled interactions with foods and microorganisms. Nanomaterials may deliver antimicrobial compounds, antioxidants and other active substances in a controlled or targeted manner. Silver, zinc oxide and chitosan nanoparticles can be incorporated into coatings and films to reduce microbial contamination while maintaining sensory and nutritional quality. The chapter discusses nanoencapsulation, nanoemulsions, antimicrobial nanoparticles and nanosensors for detecting spoilage and monitoring shelf life. It also considers effectiveness, controlled release, food applications, safety assessment and potential regulatory concerns associated with nanotechnology.

Introduction

The act of substituting food or drink with low grade quality ingredients thereby the f inal product will fail to the meet the regulation or standards and in most cases even unfit for human consumption (Augustin et al., 2009). With demand for profit based manufacturing market, there will be increase in points of adulteration with cheaper alternatives or inferior grade ingredients in the production of food or drink (Banti, 2020)]. Adulteration is highly prevails in developing countries such as India, where about 70% of milk supply is adulterated on day to day basis (Bittar et al., 2017). It is every nation and each individual’s responsibility to provide safe and nutritious food to the consumers.

Agriculture serve as a backbone in improving economic growth of a country as well as it provides a base in meeting various needs of people in direct and indirect ways. The recent advancement in nanotechnology has shown a path to develop traditional agriculture into a sustainable practice. Several nanochemicals emerged as promising agents for better plant growth, used as fertilizer, pesticides, control weeds and also used as antimicrobial agents in food packaging. Nanotechnology may act as sensor for checking soil health of agriculture fields.

Nanotechnology is a multidisciplinary domain dedicated to manipulating materials at the nanometre scale (1-100 nanometres), where distinctive physical, chemical, and biological features arise. This transformative technology has applications across various sectors, including medicine, electronics, energy, agriculture, and environmental protection. The concept originated from Richard Feynman’s 1959 lecture, which envisioned the direct manipulation of atoms and molecules. Since then, advancements in microscopy and materials science have propelled nanotechnology into a significant area of applied science. In healthcare, it facilitates targeted drug delivery systems, improving therapeutic efficacy and reducing negative effects. Nanotechnology is also essential in ecological applications, including wastewater treatment and pollution management, where nanomaterials are employed for efficient filtration and remediation. Despite its potential, it raises ethical, safety, and regulatory concerns, including the long-term effects of nanoparticles on health and the environment. The lack of standardized regulations poses challenges for the safe deployment of nanotechnology in various applications. In agriculture, it facilitates the development of nanofertilizers and nano-pesticides, which improve nutrient delivery and reduce environmental impact. Recent research in India highlights the promising use of nano-bionoculants—nano-formulated bio-fertilizers that enhance plant growth and soil health by encapsulating beneficial microbes. Studies have shown that combining nanomaterials with bioinoculants can significantly improve crop yields and resilience to stress, indicating a shift towards sustainable agricultural practices. Nanotechnology represents a paradigm shift in science and technology. It offers innovative solutions to pressing global challenges while necessitating

Nanotechnology epitomizes one of the most dynamic and transformative fields in modern science and technology. This multidisciplinary domain bridges chemistry, physics, biology, along with engineering, enabling the creation of materials and devices with extraordinary properties and applications. The book chapter reflects the research and patenting trends in nanotechnology. USA leading the global share for most patents granted followed by South Korea, Japan, China and Germany for the top five spots contributing more than 76% of all the granted patents by EPO & USPTO related to nanotechnology. Nanotechnological products in relation to sub-industrial areas of medicine, food, agriculture, cosmetics, environment, and renewable energies are also highlighted in chapter. 

Introduction
The aquaculture sector is vital in ensuring global food security by providing a substantial share of the world’s protein supply. With the rising demand for aquaculture products, enhancing fish growth and development has become increasingly important. However, traditional approaches, such as dietary supplements and environmental management, often fall short in terms of efficiency and sustainability. In this regard, nanotechnology presents a groundbreaking solution, with nanomaterials offering innovative methods to overcome these limitations. Nanomaterials possess exceptional
physicochemical properties, including a high surface area, enhanced reactivity, and nanoscale dimensions, making them highly effective in various fields like medicine, agriculture, and environmental management.Their application in aquaculture has demonstrated the potential to enhance nutrient delivery, boost immune system responses, and improve feed utilization, ultimately
promoting better fish growth and health. Additionally, nanotechnology facilitates the targeted delivery of bioactive substances, reducing waste and mitigating environmental impact.This discussion delves into the significant role of nanomaterials in improving fish growth and development, focusing on their mechanisms, advantages, and practical applications. By exploring the interactions between nanomaterials and aquatic biological systems, we can uncover sustainable and innovative solutions to fulfill the increasing requirements of aquaculture sector.
In recent decades, aquaculture is the fastest growing sector and has become a vital food source to meet the global growing demand for protein requirements. This sector provides protein source, healthy fat, and essential micronutrients for the people around the world. It offers local employment, livelihood, high export earnings, supporting national GDP. Improved aquaculture practices
have increased fin and shellfish production, decreasing dependance on wild seed and fish stocks. Global fish consumption increased by 3% between 1961 and 2019 (FAO, 2023). Nanotechnology is a promising solution, offering unique properties at smaller dimensions (1-100 nm) with novel applications (Matteucci et al., 2018; Shaalan et al., 2015). Recent efforts focus on health management, fish and shellfish development, seafood processing, and water treatment.

Nanotechnology is manipulation of matter on an atomic, molecular, and supramolecular scale. The earliest, widespread description of nanotechnology referred to the particular technological goal of precisely manipulating atoms and molecules for fabrication of macroscale products, also now referred to as molecular nanotechnology.
Nanotechnology as the manipulation of matter with at least one dimension sized from 1 to 100 nanometers. This definition reflects the fact that quantum mechanical effects are important at this quantum- realm scale, and so the definition shifted from a particular technological goal to a research category inclusive of all types of research and technologies that deal with the special properties of matter which occur below the given size threshold. It is therefore common to see the plural form "nanotechnologies" as well as "nanoscale technologies" to refer to the broad range of research and applications whose common trait is size.
Introduction
A nanometer (nm) is one thousand millionth of a meter. A single human hair is about 80,000 nm wide; a red blood cell is approximately 7,000 nm wide, a DNA molecule 2 to 2.5 nm, and a water molecule almost 0.3 nm. The term ”nanotechnology” was created by Norio Taniguchi of Tokyo University in 1974 to describe the precision manufacture of materials with nanometer tolerances, but its origins date back to Richard Feynman’s 1959 talk ”There’s Plenty of Room at the Bottom” in which he proposed the direct manipulation of individual atoms as a more powerful form of synthetic chemistry. Eric Drexler of MIT expanded Taniguchi’s definition and popularised nanotechnology in his 1986 book “Engines of Creation: The Coming Era of Nanotechnology”. On a nanoscale, i.e. from around 100 nm down to the size of atoms (approximately 0.2 nm) the properties of materials can be very different from those on a

Nanotoxicity is the study of the toxicity of nanomaterials that focuses on how the size and unique properties of nanoparticles influences their impact on plant helath, human health and the environment. Plants are essential fundamental components of all ecosystems and the interaction between nanoparticles (NPs) and plants is an indispensable aspect of the risk assessment. NP phytotoxicity, an important precondition to promote the application of nanotechnology and to avoid the potential ecological risks was reviewed (Jie Yang et al., 2017). 

Nanotoxicology is the study of the toxicity of nanomaterials. Because of quantum size effects and large surface area, nanomaterials have unique properties compared with their larger counterparts

Nanotoxicology is that branch of bionanoscience, which deals with the study and application of toxicity of nanomaterials. The nanomaterials, even when they are made of inert elements like gold, become very active at a nanometer range. Nanotoxicological studies are intended to determine whether and to what extent these may pose a threat to the environment and to human beings. For instance, Diesel nanoparticles have been found to damage the cardiovascular system in a mouse model.

Human health and safety

Calls for tighter regulation of nanotechnology have occurred alongside a growing debate related to the human health and safety risks associated with nanotechnology. The Royal Society identifies the potential for nanoparticles to penetrate the skin, and recommend that the use of nanoparticles in cosmetics be conditional upon a favorable assessment by the relevant European Commission safety advisory committee. Andrew Maynard also reports that ‘certain nanoparticles may move easily into sensitive lung tissues after inhalation, and cause damage that can lead to chronic breathing problems’.

Cumbu Napier hybrid grass is a cross between Cumbu (Pennisetum glaucum) and Napier grass (P. purpureum Schumach.), widely cultivated across India, Africa, Sri Lanka and South East Asian countries. As the hybrid is a triploid, it displays complete sterility and high vegetative growth. In Tamil Nadu, land area utilized for growing fodder is negligible, accounting only 1.6 per cent of the total cultivated area.

INTRODUCTION

Narcissus is a hardy or tender herbaceous perennial, growing from bulbs and seeds. In India it is commonly called Nargis. The splendid yellow and white flowers of the narcissus alone could make April and May month of delightful sweetness in the garden. Shakespeare mentioned Narcissus again and again as common symbol of the English spring. Narcissus are highly suitable for rowin in beds ots under the deciduous trees, window garden, etc. They are very good cut flower and are sold in the market. The bulbs of the European species are used in folk medicine as these are believed to possess the purgative, dermal and depurative properties. Few species are used for extraction of essential oil in France. There is often confusion as to whether the name narcissus or daffodil should be used. Popular thought attached the former name to the sweet scented tazetta or poet narcissus and the latter to the small wild Lent Lily which is still to be found massed in the wood and open pastures. Today daffodil usually refers to long trumpet and large flowered garden forms while, all the rest are narcissus. In the simplest words, the species of this are called narcissi, although the trumpets, which have trumpet (corona or cup) as long as or longer than the surrounding petals are usually called daffodils.

Introduction

India has one of the best agricultural research systems in the world with better amount man-power amongst the developing countries. The research system includes more than 30,000 scientists along with 1,00,000 subordinate personnel actively engaged in research system in the country involved to agricultural research which considered to be second highest next to China. The achievement and success looks very much impressive and at par with all the developed nations of the world.

National Agricultural System

India has one of the largest agricultural research systems in the world with the largest number of scientific personnel of any developing country except China. The research system includes approximately 30,000 scientists and more than 100,000 supporting staff actively engaged in research related to agriculture. Although the total number of scientists engaged in agricultural research in India looks very impressive, it compares less favorably with many developed countries.

The present agricultural research system comprises essentially two main streams, the ICAR at the national level and the Agricultural Universities at the State level. Besides, several other agencies such as General Universities, Scientific Organizations, and various Ministries/Departments at the Centre, as also Private or Voluntary Organizations participate directly or indirectly in research activities related to agriculture.

National Agriculture Technology Project (NATP)

This project was launched by the ICAR on June 30, 1998, with the support of the World Bank to strengthen and complement the existing resources and to argument the output National Agricultural Research System (NARS).

Objectives

The major objective of this component is:

National Agriculture Development Programme/Rashtriya Krishi Vikas Yojana (RKVY)

Economic reforms initiated since 1991 have put the Indian economy on a higher growth trajectory. Annual growth rate in the total Gross Domestic Product (GDP) has accelerated from below 6 per cent during the initial years of reforms to more than 8 per cent in recent years. The Planning Commission in its approach paper to the Eleventh Five-Year-plan has stated that 9 per cent growth rate in GDP would be feasible during the Eleventh Plan period. However, Agriculture that accounted for more than 30 per cent of total GDP at the beginning of reforms failed to maintain its pre-reform growth. On the contrary, it witnessed a sharp deceleration in growth after the mid-1990s. This happened despite the fact that agricultural productivity in most of the states was quite low as it were, and the potential for the growth of agriculture was high. The GDP of agriculture increased annually at more than 3 per cent during the 1980s.

Since the Ninth Five-Year Plan (1996 to 2001-02), India has been targeting a growth rate of more than 4 per cent in agriculture, but the actual achievement has been much below the target. More than 50 per cent of the workforce of the country depends upon agriculture for it’s livelihood and slow growth in Agriculture and allied sectors can lead to acute stress in the economy because a large proportion of population depend on this sector. A major cause behind the slow growth in agriculture is the consistent decrease in investments in the sector by the state governments. While public and private investments are increasing manifold in sectors such as infrastructure, similar investments are not forthcoming in Agriculture and allied sectors, leading to distress in the community of farmers, especially that of the small and marginal segment. Hence, the need for incentivising states that increase their investments in the Agriculture and allied sectors has been felt.

1. Introduction

The National Agroforestry Policy of India is a comprehensive policy framework designed to improve agricultural livelihoods by maximizing agricultural productivity including animal productivity along with tree cover and mitigating climate change. The Government of India launched the policy in February 2014 during the World Congress on Agroforestry, held in Delhi. The focus of the policy is to address Agroforestry, which is an integrated system of practicing agriculture, livestock farming and forest activities on the same unit of land, storing high carbon, there by mitigating climate change. Agroforestry systems have the potential to be more beneficial than traditional agriculture and forest production practices. They may be able to give enhanced productivity, as well as social, economic, and environmental advantages, as well as a broader variety of ecological products and services. It’s important to remember that these advantages are contingent on appropriate farm management. In 2014 India became the first nation in the world to adopt an inter-sectoral policy on agroforestry, which seeks to identify the bottlenecks in expansion on agroforestry in the country and pathways to remove the constraints in a systematic manner.

India’s growing aquaculture industry requires the implementation of standardized laboratory techniques for detecting fish pathogens to uphold fish health, ensure biosecurity, and meet international trade standards. Both national and international diagnostic guidelines play a vital role in ensuring accurate identification of diseases, surveillance, and certification.
Domestically, the Indian Council of Agricultural Research (ICAR), particularly through institutes like ICAR-Central Institute of Fisheries Education (CIFE) and ICAR-National Bureau of Fish Genetic Resources (NBFGR), has developed diagnostic methods suited for Indian conditions. These include techniques such as histopathology, bacteriology, ELISA, PCR, and qPCR, specifically validated for key cultured species like Labeo rohita, Catla catla, Penaeus vannamei, and Clarias batrachus. The National Surveillance Programme for Aquatic Animal Diseases (NSPAAD) also outlines protocols for disease diagnosis and reporting, aligning with the standards set by the World Organisation for Animal Health (WOAH), previously known as OIE.
At the global level, WOAH offers comprehensive diagnostic manuals for key aquatic animal diseases like white spot disease (WSSV), infectious pancreatic necrosis (IPN), and epizootic ulcerative syndrome (EUS). These manuals detail procedures for collecting samples, using PCR primers, conducting serological tests, and identifying histopathological features. Adhering to these protocols is essential for maintaining the credibility of Indian exports to markets such as the EU, USA, and ASEAN countries. Additionally, laboratories with ISO/IEC 17025 accreditation ensure quality control and global recognition of their test results.

Previous Year Questions

1. Write down the various programmes run by state & central govts for ensuring food security in our country. Briefly discuss the strategies for sustainable agricultural production (20M, CSE 2023)

2. How will national food policy help in sustainable food security? (CSE 2020, 10 marks)

3. Discuss the national initiatives for food and nutrition security. (8M, IFoS-2019)

4. What are the special schemes for providing food grains to underprivileged, destitutes and malnourished populations (CSE 2016, 12.5 marks)

5. National and international food policies. (10M, IFoS-2016)

Historically, Indian scientists have recognized the importance of conserving plant biodiversity with particular reference to indigenous     and naturalized crops and their wild relatives. Indian scientists have recognized the importance of conserving plant biodiversity as early as 1935 by the ‘Crops and Soil Wing’ of the then Board of Agriculture and Animal Husbandry. Late Dr. B. P. Pal, in his classic paper ‘Search for New genes’ published in 1937 emphasized the importance of germplasm augmentation and utilization in crop improvement programmes. The need was reiterated in a meeting of the Indian Society of Genetics and Plant Breeding in 1941, which inter alia discussed the subject of economic crops. Dr. B. P. Pal, working at the then Imperial (now Indian) Agricultural Research Institute approached the then Imperial (now Indian) Council of Agricultural Research (ICAR) to set-up a unit for assembly of global germplasm under phytosanitary conditions in India. The ICAR scheme for plant introduction started functioning in 1946 under the leadership of late Dr. Harbhajan Singh as the first ‘Operational Scientist’. The scheme was further expanded and strengthened as ‘Plant Introduction and Exploration Organization’ in the Botany Division in 1956 and later established as a separate Division of Plant Introduction in IARI in 1961 headed by Dr. Harbhajan Singh.

Introduction
Education and Its Evolution
Education is a process of learning, which involves both formal and informal modes of learning, which transforms the behaviour, skills, knowledge attitudes, and beliefs of the learner. For this reason, it is more deliberate than other education activities since it is a deliberate effort to create learning in a bid to achieve set goals and objectives. Ordinarily, education is characterized by a systematic learning system that is complemented by curricula and instructional materials in different disciplines. This includes talking and explaining, discussing and questioning, performing and observing so as to reach individual students. Communication is also considered as necessary as education is a process of interconnecting people, exchanging information, and learning how to deal with society members. It also develops critical skills such as analysis and developing insights, due to its capacity to offer information to be analyzed, find solutions and then make sound decisions. Education implies character building and it shapes people into responsible members of society. Education also fosters a construct of perpetuity learning which in this case is strengths toward self and career. There is the principle of non-selectiveness as one of the basic principles of education, as education must be provided to all so that all students should be given an equal opportunity. Learners’ understanding and progress can be measured therefore, assessment and evaluation were part of the program to ensure that teaching strategies can be improved. In addition, it has a 96 | Sustainable Development Goals, Health & Education sociocultural function of passing on a culture from one generation to another, and thus preserving social and cultural development and growth. In its strictest sense education is learning as it is getting acquainted with information as well as has the added dimension of moulding positive character in the learners so that they and society can be the better for it. From antiquity to the present, education has undergone tremendous change, having a huge impact on the advancement of society. When education was first developed in ancient communities, it took the form of apprenticeships, oral traditions, and storytelling to impart cultural values, religious convictions, and useful survival skills. For the elite, it was frequently reserved, preventing access for the general public and preserving social hierarchies. A teacher-centered approach limited student interaction and critical thinking, and the curriculum prioritized memorization and rote learning with a focus on mythology and societal responsibilities. In comparison, the goal of contemporary education is to develop students’ ability to think critically, be creative, and solve problems in a formal, structured manner. Regardless of one’s background, access to it is considered a fundamental right that fosters inclusivity and social fairness. The curriculum’s diversity promotes inquiry and discovery by including technology, the arts, and the sciences. A variety of student-centered, modern teaching techniques are used to improve critical thinking and participation. Education is now a key factor in social and economic development as a result of this change, encouraging creativity and producing knowledgeable citizens who take an active role in solving global issues. After all, if education in the past served to uphold hierarchical institutions, education today aims to dismantle obstacles and promote equality in society.

Introduction

The much awaited new educational Policy 2020 approved and released by the Central Government on July, 29, 2020. A document which is set to transform Indian education system in most holistic way and will exert a long lasting influence on framing the Indian education system by addressing the vivid issues across the discipline and streams. The implementation of this policy will be under a single body HECI (Higher Education Council of India) well supported by multiple bodies like National Higher Education Regulatory Council(NHREC), Meta-accrediting body referred as Nation accreditation Council (NAC), Higher Education Grant Council (HEGC), General Education Council(GEC) also called Graduate attributes, it will formulate the National Higher Education Qualification Frame work (NHEQF). This council will take over presently regulating bodies of higher education like University Grant Commission, All India Council of Technical Education and National Council of Teachers Education.

INTRODUCTION

The discipline of Agrometeorology, an applied science is less than fifty years old. Its services are operationally used by individual farmers in developed countries, and by agricultural or development services in more than half of the countries of the world. Its contribution to agricultural production by examining forecast is sought in virtually all countries. In many countries, the respective governments have expressed the desire to use meteorological information to a much larger extent in day-to-day farm planning and operations. The climate database is used for the development of practical criteria in planning and management of irrigated and rainfed crop production system (Martin Smith, 2000).

Though a huge set of Agromet data exists in India, its utility has not been effective due to the scattered location of these data sources and the impediments for free flow of data to the users to analyze and interpret for real-time decision making in agriculture. There is also a considerable time lag between the actual observation and data availability. In view of the importance and the immediate exigency to centralize the database system for helping the researchers and planners, a central agrometeorological databank facility funded by DST from 1998 to 2003 and later by ICAR with the following objectives was established at Central Research Institute for Dryland Agriculture (ICAR), Hyderabad.

Introduction

India accounts for 16.7 per cent of the world’s food consumers. India’s size in terms of food consumers is many times larger than the average size of the rest of the countries, except China. At the time of independence in 1947, India was in the grip of a serious food crisis, which was accentuated by the partition of the country. The demand for food far exceeded supply, food prices were ruling at high levels and more than half of the populations were living below the poverty line with inadequate purchasing power. With high rates of population growth, the dependence on imported food increased further. However, the situation improved considerably after the mid-1960s, when new agricultural development strategy and food policies were adopted in the country. The production of staple cereals increased substantially, mainly contributed by productivity improvements. The dependence on food imports reduced and the country became a marginal net exporter of cereals. There was also an improvement in physical and economic access of households to cereals and other nutritive food products. The proportion of households reporting hunger went down and the incidence of economic poverty was reduced. The objective of this paper is to review the Indian approach to tackling the severe problem of food insecurity, which it faced immediately after independence. It reviews the evolution of food policy, the major policy instruments deployed, intervention in food marketing system, and the current status of food security/insecurity. The paper also identifies the lessons emerging from the experience of India. The paper has been divided into eight sections. The second section briefly presents the evolution of the food policy in India and the approaches to food security. The current status of food security and insecurity is analyzed in section 3. The next three sections detail the three major instruments of the food security policy. Price support policies pursued in the country are described in section 4. Section 5 examines the magnitude of input subsidies in Indian agriculture. Direct food and other assistance programs for improving household food and nutrition security and magnitude of food subsidy are presented in section 6, while some salient features of food marketing system that affect food security are given in section 7. Lessons emerging from the Indian experience are presented in the last section.

Macroeconomics approaches the economic problems in terms of aggregates like national income, general employment level, aggregate demand, aggregate production and so on. The important among the above is national income. The one common thing to all products is value. Therefore, the national income must be expressed in monetary terms. The entire value of the goods and services (output) produced by an economy over time is measured by national income (normally a year). It also serves as a measure of the money generated by production and/or the total amount of expenditures made in order to produce the output.

Significance

The Central Statistical Organization of India has been calculating the country’s gross domestic product. We can measure your academic performance in relation to other students by the percentage of the marks scored by you. Similarly a country’s economic performance has been measured by indicators of national income such as GDP or GNP. Additionally, it is crucial to measure national income for a number of reasons, such as making predictions about how the economy will develop in the future,

16.1. Meaning
National Income is nothing but the aggregate money value of all goods and services produced in a country in a year. It can also be viewed as income distributed among the factors of production in the form of rent (to land), wages (to labour) interest (to capital) and profits (to entrepreneurs).
According to Alfred Marshal National Income is defined as the labour and capital of a country acting on its natural resources produce annually a certain net aggregate of goods and services.
16.1.1. Limitations
• In an economy in which numerous goods and services are produced, it is really a difficult proposition to estimate them correctly to arrive at the national income. Coming to the farming, farmers do retain some part of production for personal consumption and the rest is only marketed. In such a case, the methodology to evaluate the amount of produce not reached the market has not been given.
• Double counting: It implies the same good being counted twice: say, cotton may be counted in agricultural production and the cotton cloth in industrial production.
Marshall approached national income from production end. On the other hand, some other economist approached from consumption end. At the same time this approach in reality poses problems. Consumers who number in millions, consumes the same good at different places, and the estimation of their total consumption is a difficult proposition. Hence, there are problems in measurement of national income.

Horticulture in the hills has special significance and specific requirements to sustain it for the improvement of the lot of the people living in the hills. The national policy on horticulture has to be so oriented so that it recognizes the varied agro climatic and soil conditions. The dynamic process of development and extension has to be specifically designed to cater to the requirements of the hill states; which, because of the difficult terrain, are by and large under-developed as compared to the rest of the country. The new national policy on horticulture should take into account the following points in order to make temperate horticulture a self sustaining enterprise.

The concepts of biosafety and biosecurity are central to efforts to protect human health against the risks posed by exposure to hazardous biological agents. Biosafety, a term used to describe the collection of technologies, processes and practices a term used to describe the collection of technologies, processes and practices aimed at preventing the unintentional exposure to biological agents, has in particularaccrued increasing importance in recent decades as a result of the trend towards globalization and concomitant growth in international communication, transport and trade (WHO, 2020). In this international context, the outbreaks of highly-infectious diseases that have occurred in the last years serve to underscore the urgent need for effective prevention and detection and response to biological risks, in accordance with the International Health Regulations (IHR).

National Rural Employment Programme (NREP)

The NREP was launched in October, 1980 and became a regular Plan programme from April, 1981. The programme was expected to generate additional gainful employment in the rural areas, to the extent of 300-400 million mandays per annum, create durable community assets, and improve nutritional status and living standards of the poor.

An outlay of Rs. 1620 crores was provided under this Programme, out of which the outlay from 1980-81 onwards (Rs. 1280 crores) was to be shared equally between the Centre and the States.

Introduction

Indian Agriculture has made enormous strides in the past 50 years, raising foodgrains production from 50 million tonnes to over 200 million tonnes.  In the process, the country has progressed from a situation of food shortages and imports to one of surpluses and exports.  Having achieved food sufficiency, the aim now is to achieve food and nutritional security at the household level.

The increase in agricultural production, however, has brought in its wake, uneven development, across regions, crops, and also across different sections of farming community.  In the decade of the ‘nineties’, a marked slackening in the pace of growth has occurred, pointing to the need for infusing a new vitality in the agricultural sector.

Aims and Objectives

It has become evident that in order to achieve the food production targets of the future, a major effort will be required to enhance the seed replacement rates of various crops. This would require a major increase in the production of quality seeds, in which the private sector is expected to play a major role. At the same time, private and Public Sector Seed Organisations at both Central and State levels, will be expected to adopt economic pricing policies which would seek to realise the true cost of production. The creation of a facilitative climate for growth of a competitive and localised seed industry, encouragement of import of useful germplasm, and boosting of exports are core elements of the agricultural strategy of the new millennium.

Biotechnology will be a key factor in agricultural development in the coming decades. Genetic engineering/modification techniques hold enormous promise in developing crop varieties with a higher level of tolerance to biotic and abiotic stresses. A conducive atmosphere for application of frontier sciences in varietal development and for enhanced investments in research and development is a pressing requirement. At the same time, concerns relating to possible harm to human and animal health and bio-safety, as well as interests of farmers, must be addressed.

Globalization and economic liberalization have opened up new opportunities as well as challenges. The main objectives of the National Seeds Policy, therefore, are the provision of an appropriate climate for the seed industry to utilize available and prospective opportunities, safeguarding of the interests of Indian farmers and the conservation of agro-biodiversity. While unnecessary regulation needs to be dismantled, it must be ensured that gullible farmers are not exploited by unscrupulous elements. A regulatory system of a new genre is, therefore, needed, which will encompass quality assurance mechanisms coupled with facilitation of a vibrant and responsible seed industry.

Rural poultry production constitutes vital component of agricultural economy in India. The organized sector of poultry industry is contributing nearly 70% of the total output and the rest 30% by the unorganized sector. In unorganised sector, poultry are reared in free range extensive system with very little input in the form of grain or farm by-products, birds have to scavenge from limited amount of feed resource. The productive out put of these birds are very low (60-70 eggs per bird per annum; 2.0 kg. and 1.5 kg. body weight per bird in males and females, respectively). Moreover, still more than 50 % population of poultry in India comprises of non-descript / deshi birds.

1. INTRODUCTION

The Technology Protection System (TPS) or “Terminator Technology” as it has been called, allows plant breeders to genetically modify and protect their crop rights so they produce seed for one generation only. TPS was co-developed by the US Department of Agriculture (USDA) and Delta and Pine Land Company in 1998. They received U.S. Patent 5723765 entitled “Control of Plant Gene Expression”. The patent was based on research conducted under a Cooperative Research and Development Agreement (CRADA) between Delta and Pine Land Co. and the ARS USDA. The CRADA was signed in 1993.

The prolong taking of excessive salt causes profound nutritive changes to take place in the system, and there arises not only the symptoms of salt retention as evidenced by dropsies and oedemas, but also an alteration in the blood causing a condition of anaemia and leucocytosis. There seems also to be retention in the tissues. It is a great remedy for certain forms of intermittent fever, anaemia, chlorosis, many disturbances of the alimentary tract and skin. Great debility; most weakness felt in the morning in bed. Dry mucous membranes. Constrictive sensation throughout the body. Great weariness and weakness. Oversensitive to all sorts of influences. Hyperthyroidism. Goiter, Addison's disease. Diabetes.

According to Dr. E.B. Nash, Nat Mur is one of the best homoeopathic remedies for anemia. This anaemia can be caused by loss of fluids, by menstrual irregularities, by grief or mental diseases. The patient is pale, emaciated and in spite of eating very well he is anaemic. He suffers from a throbbing headache, soreness while climbing steps, exhaustion or physical exertion, constipation to some degree and overall depression. Some women have scanty flow of blood during menses.

Stains are inevitable in histology to impart variable colours to different tissue components. In this domain, hematoxylin (H) and eosin (E) dyes are the dominant stains. According to an estimate nearly 2.5 million slides are stained with H & E each day, reflecting its enormous use in histology laboratories. Hematoxylin is a natural dye, extracted from bark of logwood (Haematoxylon campechianum), whereas eosin is a synthetic dye. The journey of using natural dyes in histology began with A. Leeuwenhoek (1673) who used “saffron”, an extract of saffron crocus. It continued until the systematic studies of C Weigert, J Gerlach, P Ehrlich and H Gierke to the second half of the 19th century and then this filed became subdued by the emerging era of synthetic dyes for their effective tinct. Today most of the stains used in histology are the synthetic dyes. Often, these dyes need further treatment with chemicals to formulate the final working solutions. Synthetic dyes are efficient, but may pose serious health hazards. The awareness on such hazards even has gone to an extent of withdrawal of some of the dyes from histological techniques. Frequent exposure to these chemicals constantly affects the health of the laboratory technicians, pathologist and mainly those working in the laboratory.
Therefore, an era has triggered on the current day, to seek for use of the natural herbal dyes in histology. Despite various shortcomings with use of natural herbal stains, they can still be sought as an analogous to the conventional stains. The concern for safety, cost-effective, eco-friendly, biodegradability and local availability is driving the quest to explore the abundant local plant resources for this purpose. The precise research on various parts of the plants such as stems, leaves, flowers, fruits, roots and seeds used for dye extraction in our laboratory to stain the cell cytoplasm replacing the conventional eosin stain are chronicled in this documentation.

Various methods are employed to dry flowers and foliage. The method adopted for drying depends largely on the character of the plant, that is to say whether the plant is glabrous, succulent or not succulent, hardy or delicate in nature. The suitable method for drying any given plant has to be studied elaborately. However, the different methods of drying are described broadly in this and consequent chapters.

The major drawback of dried arrangements and other dry flower products is that they are dull and lack the brightness of fresh flowers. To overcome this problem, flowers are bleached and dyed. This enhances the visual appeal of the product. Both chemical and natural dyes can be used. Squires (1971) reported on the use of various types of paints to colour dried foliage and flowers using brushes or by dipping and spraying. Enamel paints, interior paints, poster paints and tube paints could be employed for this purpose. Tampion and Reynolds (1971) explained the three ways by which dyeing can be carried out for fresh flowers. They are as follows:

1. Introduction

Antioxidants are considered an important class of nutraceuticals which are associated with health improving properties. Antioxidants are compounds which when present in foods at concentrations lower than an oxidizable substrate, markedly delay or prevent the oxidation of substrate (Halliwell, 1999). They are increasingly applied in food systems to retard the oxidation process, particularly in lipid containing foods (Droge, 2002; Lee et al., 2004). The commercially available solutions to counter food oxidation are predominated by synthetic antioxidants such as butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT) and tertiary butyl hydroquinone (TBHQ), among others, which are increasingly rejected by consumers and legitimized by regulators due to long term health implications (Park et al., 2001). As a consequence, the development and utilization of natural antioxidants as alternatives to synthetic ones have attracted global interest among researchers.

The use of spices and herbs in foods was known since ancient times to modify or to improve the flavor. However, the antioxidant properties of only some of the spices have been recognized. Different spices and their extracts such as turmeric, ginger, fennel, rosemary, and sage, among others, are reported to possess very high antioxidant properties, owing to the content of biologically active compounds, which enables their food application (Madhavi et al., 1996). Exploitation of natural antioxidants in consumer goods is increasingly accepted and will gain momentum due to the rise of green consumerism. In this chapter, an attempt has been made to provide an insight into natural antioxidants and colors. Beginning with the source distribution of natural antioxidants, followed by review of extraction methods for their isolation from plant based matrices and bio-preservative properties in vegetable oils to delay rancidity. Lastly, a thorough collection of literature pertaining natural colors has been presented to potentiate the application of clean label ingredients in food systems. The application of natural antioxidants and colors in food products can vouch the food safety with value addition in terms of their nutraceutical properties.

Introduction

Fruits contain various beneficial compounds that possess biological activities and can be used as pharmaceutical nutraceutical products. Most of the fruits contain polyphenolic components that can promote antioxidant potential on human health. Wild Blueberries, strawberries, plums, oranges, grapes, cherries and mangoes are rich in antioxidant. Additionally, anti-inflammatory, antibacterial, antifungal and chemopreventive effects are associated with the various fruits. Besides polyphenols, other compounds such as xanthones, carotenoids, saponins also exhibit health effects. Fruit consumption is considerably increasing in the daily diet because they supply high levels of biologically active compounds that impart health benefits beyond basic nutrition. Fruits provide an optimal mixture of antioxidants such as vitamins C and E, polyphenols and carotenoids, vitamins, phytoestrogens, glucosinolates and anthocyanins. Diets rich in fruits may help to delay the ageing processes and reduce the risk of certain types of cancer, cardiovascular diseases and other chronic diseases. The combination of vitamins, minerals, phenolic, antioxidants and fibre seems to be responsible for these effects. The most dietary components in fruits acting as antioxidants are fibre, polyphenols, conjugated isomers of linoleic acid, D-limolene, epigallocatechin, gallate, soy protein, isoflavones, vitamins A, B, C and E (group of tocopherols), calcium, selenium, chlorophyllin, alipharin, sulphides, catechin, tetrahy-drocurecumin, seasaminol, glutathione, uric acid, indoles, thiocyanates and protease inhibitors.

Introduction

Pulses are annually grown leguminous crops that yield one to twelve grains/ seeds within a pod, and are often promoted in diet owing to their low cost and many beneficial nutritional effects (Craig 2009). The United Nations general assembly has declared 2016 as the international year of pulses (Oyeyinka et al. 2016). The Food and Agriculture Organization (FAO) describes pulses as the crops that are harvested only for dry grain. This definition excludes crops that are harvested green as food sources (such as green beans and green peas), crops that are used only for sowing purposes (such as alfalfa and clover) and crops used primarily for oil extraction (such as peanuts and soybean). India is the largest producer (around 25%) of pulses in the world and the Indian subcontinent covers the leading area in terms of consumption of pulses. It was also suggested that India can also increase the production output by 30%, considering a rise in government support prices for stimulating the growth of pulses and in case of a normal monsoon season (FAOSTAT 2008). The mainly grown pulses in India include mungbean (green gram), chickpea (Bengal gram), urd bean (black gram), lentil (masur), pigeon pea (arhar), cowpea, horse gram and peas (Tiwari and Singh 2012). In the western countries, nowadays pulses are one of the preferred food sources of the population, owing to ideological reasons and interest in vegetarian diet.

Introduction

Functional elements are non-conventional biomolecules in foods that have the ability to modulate one or more body metabolic processes or pathways, leading in health advantages and well-being promotion. Research has demonstrated a connection between food, health and well-being functional elements. Consequently, functional elements have health-promoting roles connected with multiple progressive steps at various phases of disease control, from initiation to growth. They can therefore be implemented efficiently in disease therapy and prevention. Therefore, the borderline between food and medicine is becoming very thin at a moment when the role of a healthy diet in stopping non-communicable diseases is well recognized. Functional elements include plant-derived, non-nutritious and biologically active chemicals that operate in the body to avoid certain non-communicable diseases from occurring.

Food contains over 900 phytochemicals. One fruit or vegetable serving (about 120g) can contain as many as 100 distinct phytochemicals. Previously, functional elements were believed to happen predominantly only as phytochemicals in plant products including whole grains, fruits and vegetables. However, in animal goods such as milk, fermented dairy products and cold water fish, probiotics, conjugated linolenic acid, long-chain omega-3, −6 and −9 polyunsaturated fatty acids and bioactive peptides are also discovered. Usually, functional elements happen in various forms in food such as glycosylated, esterified, thiolated or hydroxylated materials. They also have numerous metabolic operations that enable positive impacts in the body on several illnesses and target tissues (Balic et al. 2020).

Definition of Disaster

A disaster can be defined as a sudden or catastrophic event that causes significant damage, destruction, and disruption to human life, property, or the environment. Disasters can be natural, such as earthquakes, hurricanes, floods, wildfires, or they can be human-made, including industrial accidents, terrorist attacks, or technological failures.

Disasters often result in the loss of lives, injuries, displacement of people, infrastructure damage, and the interruption of essential services like electricity, water, and communication systems. They can have long-lasting impacts on communities, economies, and the environment.

Governments, organizations, and communities implement disaster preparedness, response, and recovery strategies to mitigate the effects of disasters, protect lives and property, and facilitate the rebuilding and restoration of affected areas.

It is a well known fact that natural disasters strikes countries, both developed and developing, causing enormous destruction and creating human sufferings and producing negative impacts on national economies. Due to diverse geo-climatic conditions prevalent in different parts of the globe, different types of natural disasters like floods, droughts, earthquakes, cyclones, landslides, volcanoes, etc. strikes according to the vulnerability of the area. India is considered as the world’s most disaster prone country. It has witnessed devastating natural disasters in recent past like droughts, floods, cyclones, earthquakes, landslides, etc. 

Introduction

The natural hazards like floods, cyclones, droughts, landslides and earthquakes are not rare or unusual phenomenon. India is among the world’s most disaster prone areas and a large part of the country is exposed to such natural hazards, which often turn into disasters causing significant disruption of socio-economic life of communities leading to loss of life and property. It would not be considered as a disaster unless it resulted in actual damage to human life or property. According to data accumulated over past 25 years, natural disasters in Asia accounts for about 40% of the world’s total disasters while the death toll ratio is about 50% and the number of people affected is about 90%. The latter figure is about 2.2 times the ratio of number of occurrences in Asia. The figures vary widely over the decades, a result that can be attributed to a few particularly terrible disasters. Such as the 1976 Tangshan Earthquake in China, which killed about 250,000, and a series of severe cyclones that hit Bangladesh in 1970 with a death toll of about 500,000. The death toll resulting from wind and flood disasters jumped by an order of magnitude in the 1990s. But this sudden increase affected Asia’s ratio to the world total by about 15 percentage points because there was a worldwide surge in this type of disaster. Clearly, there is an extreme concentration of victims of such disasters in Asia, Another substantial increase is clear in the value of damage caused by typhoons and cyclones; it is now running at 10 times the level of the 1980s. Again, however, the ratio has remained almost unchanged, at about 40%, because hurricanes in Central and North America account for more than 50% of the world total (51.2%, 58.5%, and 54.4% in the 1970s, 1980s, and 1990s,respectively). It is sadly worth noting that there has been conspicuous growth in the absolute value of damage in both Asia and the Americas.

WHO defines Disaster as “any occurrence, that causes damage, ecological disruption, loss of human life, deterioration of health and health services, on a scale sufficient to warrant an extraordinary response from outside the affected community or area”

Introduction
A natural disaster refers to a significant and harmful occurrence caused by the Earth’s natural processes. Examples of natural disasters include floods, storms, tornadoes, volcanic eruptions, earthquakes, tsunamis, and other geologic phenomena. A natural calamity can result in fatalities or destruction of property, and usually leads to economic harm, the extent of which is determined by the afflicted population’sability to bounce back and the availability of infrastructure.
Categories of Natural Disasters/ Catastrophes
Floods
A flood is the result of water overflowing and covering land. According to the EU Floods Directive, a flood is defined as the temporary  inundation of territory that istypically not submerged in water. Flooding can occur when the amount of water in ariver or lake exceeds its  capacity, causing the water to overflow and breach its normal borders. The size of a lake or other body of water may alter due to seasonal variations in precipitation and snow melt. However, it is not considered a substantial flood unlessthe water submerges land that is utilized by humans, such as villages, cities, populated areas, highways, and farms.

Although the thriving dye industry in many countries throughout the world is now predominantly serviced by synthetic dyes, the knowledge of the plants used to produce natural dyes still survives among some dyers, who use plant dyes to some extent. Nonetheless this indigenous knowledge is rapidly being lost as increasingly less information is being passed on to succeeding generations. Thus several countries are taking steps to revitalize this natural dyes industry. In this article the history of natural dye plants is presented; several plants from selected countries, which are used in the dyeing process are documented, together with some general methods of dye production and fabric dyeing; pattern production and the chemical constituents of some of these plants. The potential for the sustainable utilization of this important ecofriendly renewable natural resource is discussed.

Natural farming is gaining prominence in India as a sustainable and environmentally friendly method for cultivating cereals and pulses. This approach eliminates the use of chemical fertilizers and pesticides, instead depending on ageold practices, natural biological processes, and locally sourced organic materials. Crops like rice, wheat, millets, pigeon pea, chickpea, green gram, and black gram are key staples in the Indian diet, and natural farming offers a promising route to enhance both environmental health and farmer well-being.
At the core of natural farming is the focus on soil health, maintained through techniques such as mulching, crop rotation, and the use of traditional inputs like jeevamrit, beejamrit, and ghanjeevamrit. These mixtures—prepared using cow dung, urine, jaggery, pulse flour, and local soil—boost microbial activity, improving nutrient absorption and resistance to disease. Cereals benefit from proper soil moisture through waaphasa (aerated soil) and mulching, while pulses, which naturally fix nitrogen, thrive without synthetic additives.
Weeds are controlled manually or with natural solutions like agniastra, and pests are managed using plant-based formulations and cow urine sprays. Intercropping cereals with pulses enhances soil fertility, deters pests, and optimizes land usage. Farmers in states such as Andhra Pradesh, Maharashtra, and Karnataka have reported better soil health, lower input costs, and increased climate resilience through natural farming. As consumer interest in pesticide-free grains and pulses rises, farmers are also experiencing better market prices. With growing institutional support and public awareness, natural farming is emerging as a strong alternative for promoting food security, environmental sustainability, and rural development in India.

Natural farming in India is steadily gaining traction across different crop categories like tubers, oilseeds, and spices, thanks to its environmentally sustainable approach. In tuber cultivation—covering crops like potatoes, sweet potatoes, yams, and colocasia—the method promotes organic inputs, crop rotation, and soil health preservation without the use of synthetic chemicals. Natural composts, green manures, and biofertilizers nourish the soil, while homemade biopesticides and pest deterrents help manage common pests and diseases. Techniques such as mulching and moisture conservation further support ideal soil conditions,
improving both the quality and yield of tubers.
For oilseeds such as groundnut, sesame, mustard, and sunflower, natural farming enhances soil fertility using organic manures, decomposed crop residues, and locally made biofertilizers. Treating seeds with cow urine or herbal solutions enhances germination and protects against diseases. Practices like intercropping and crop diversification help disrupt pest life cycles and improve soil texture. Pest control relies on natural, plant-based sprays like neem and garlic, reducing dependency on chemical pesticides while preserving beneficial insect populations.
In the case of spices such as turmeric, cardamom, coriander, and black pepper, natural farming methods offer considerable benefits. The use of vermicompost and green manuring boosts micronutrient availability essential for healthy growth. Mulching helps retain soil moisture, especially in hilly areas. Pests and diseases are controlled using herbal preparations like Panchagavya and Agniastra, which enhance plant resistance and reduce infection rates. These eco-friendly methods lead to the production of high-quality, chemical-free spices and support biodiversity and sustainability.