eChapters

Q fever (query fever) is an important global occupational zoonotic disease caused by a bacteria Coxiella burnetti. It is an OIE notifiable disease and showing an emerging and reemerging trend in different parts of the world. It is having great public health importance as the pathogen is transmitted through almost all routes but predominantly by aerosols from reproductive discharges of animals of farm and pet animals which serve as main reservoir of infection. The organism is shed in milk and foods of animal origin for very long period. Q fever is associated with a wide clinical spectrum and most of its acute infections are either asymptomatic, mild or resemble to influenza. Presently, the infection is endemic in many areas and its prevalence has been confirmed in at least 51 countries including India.

Etiology: C. burnetti was classified as a member of Rickettsiaceae family however, recent scientific investigations on 16S RNA based sequence analysis have shown that it is genetically more comparable to bacterial families covering genus Francisella and Legionella therefore it has been reclassified in the family Coxiellaceae or order Legionellales. It is a Gm-, pleomorphic rods (0.2-0.41μX0.4-1.0μ) or sphere (0.3μ-0.4μ in diameter in size) and an obligate I/C organism. It is relatively resistant to physical and chemical agents. The bacterium occurs in two antigenic forms - the pathogenic form (phase I) found in infected animals or humans and the avirulent form (phase II) obtained by repeated passagein embryonated eggs or in cell culture. Phase II cells are autoagglutinable and are readily phagocytosed in the absence of specific antibodies. Phase I activity is attributed to surface carbohydrate antigen which is soluble in trichloracetic acid and is destroyed by periodate. Phase I is a more powerful immunogen than phase II and elicits antibodies in high titer to both antigens. Phase II antigen gives better results in CFT with human and animal sera. Q fever sera do not react with other rickettsial antigens or with Proteus. In nature, bacterium exists mainly in 3 forms, namely - the small cell variant (SCV), the small dense cells (SDC) which are spore like forms that remain very stable in the environment as extracellular infections particles and the large cell variant (LCV) which is the growing and metabolically active form inside the host. In view of the potential for transmission of this infection from animal to people, the disease has been classified as a notifiable OIE disease.

Importance of Food Additives

Food additives are chemicals, biochemical ingredients etc., which are added to food products for their technological benefits. These benefits may be to preserve the quality of food, to maintain and improve its appeal, to ensure its nutritional value and to provide innovations in new products with consumer appeal and satisfaction. Additives are also added to maintain uniform quality and to enhance quality parameters such as flavour, colour, texture etc. in large-scale production. They and their by-products ultimately become part of the food that is consumed and so they must be safe.

Additives may be direct additives, which are added deliberately to improve its sensory quality, nutritive value, stability, ease in processing and retention of quality during handling and retailing. There are also indirect additives, which are not added intentionally but get included into foods incidentally during handling, processing and packaging.

There are some guiding principles for the use of food additives. They should be justified for their technological effectiveness and purpose. They should be safe for use. There should be maximum adequate levels, absolutely necessary levels of usage and ADI (Acceptable Daily Intake) properly evaluated while considering its safety and permitted usage levels in foods. They should not be added with the intention of misleading consumers about quality. They should also not significantly affect adversely the nutritional quality of food products.

Purpose of Law

The Food Laws or Regulations are made in order to protect people consuming these foods from undue risks, which may arise from processing, transport, retailing and consumption of food products which may undergo contamination, spoilage, inclusion of harmful chemicals/microbes or at harmful levels. Besides safety, consumers are also protected by these laws with respect to quality, quantity and substance that the food products are supposed to represent. Finally, laws also aim to protect the consumers from Nutrition and Health considerations with special consideration being given to vulnerable group such as infants, pregnant women etc.

Food additives are chemical substances added to foods to improve flavour, texture, colour, appearance and consistency or as preservatives during manufacturing or processing. Herbs, spices, hops, salt, yeast, water, air and protein hydrolysates are excluded from this definition.

In many countries, the use of food additives is regulated, and food additives must be declared on food labels by using their chemical names or numbers. the use of any new additive in a particular food, they ensure that:

A nutrient budget is a valuable indicator of the long term sustainability of a cropping system. It indicates where fertilizer application is inadequate and leading to decline in the soil nutrient status. Conversely, it can indicate excessive inputs which result in a nutrient surplus and greater potential for losses to the environment and waterways. (Combs et al., 1996) Thus nutrient budget is the comparison between all the sources of nutrients available to the producer and the requirement of nutrients to meet the crop and soil needs. The sources can either be from on the farm, such as livestock manure or credits from legumes, or from off the farm, such as purchased fertilizer or irrigation water. The requirement is the amount of nutrients needed by the crop to obtain the expected yields.

Most values for nutrients available from different sources (credits) and crop nutrient requirements are calculated from estimates taken from many years of long historical averages and field research. There is no “real time” method of calculating exactly what neither the crop’s nutrient requirement or the nutrients available are at any one time. More closely, both the nutrient requirements and availability are based on past performance for the climatic and soil condition. These values are given with some surety that the crop grown will be supplied with adequate nutrient during the growing season and the crops will not be limited in its growth. All incidental environment losses, such as runoff and leaching, have been accounted for. Climatic conditions, particularly temperature and soil moisture, greatly influence both the crop performance and the soil’ s capacity to provide nutrients to the plant. During any growing season, there can be many changes in the climate conditions that will affect both the crop growth and soil delivery of nutrients to the crop.

Although a nutrient budget is not an exact formula for supplying nutrients, it is one method for organizing the nutrient needs ofthe crop with the nutrients available on the farm. Nutrient budgets can easily determine if there is a gross imbalance between the nutrients that are available vs. the amount required. Nutrient budgets are one of the best methods to see the over all supply of crop nutrients available, compared to the estimated crop needs as given by historic records and field research. Continued use of soil testing, plant and water analyses and yield monitoring are essential to maintain good nutrient balance with desired results.

1. Introduction

The interest in the uses of medicinal plants has grown considerably from the mid of 20^th century with the introduction of phytochemical analysis of natural products from various plants parts (Matos, 1996). Most studies survey specific local communities to examine patterns of use of plant part for treating various aliments along with the influence of economic and social variables on plant use (Albuquerque, 2006). Medicinal plants are the base for the development of new drug, which is the basic mode of survival of human and livestock from many diseases to maintain their healthcare (Uddin et al., 2014). Number of studies has been carried out globally on ethnomedicinal uses of plants among various indigenous communities (Alexiades and Sheldon, 1996; Basualdo et al., 1995; Martin, 1995). Particularly from the region Karbi Anglong, Assam (Teron and Borthakur, 2012, 2013; Terangpiet al., 2014; Teronpi et al., 2015) have also conducted many notable work on ethnomedicinal. While in all these studies qualitative approaches have not been adapted to document ethnobotanical information. The quantitative approaches on ethnobotany have grown steadily in the last two decades. Today researchers have developed and applied quantitative methods to the various ethnobotanical data to test different hypotheses about the relation between plant species and humans (Reyes-García et al., 2006). Quantitative ethnobotanical indices were applied to determine how important these plants are to ethnic and indigenous cultures whether, as food, veterinary medicine, human medicine or economic value from various non-timber forest products (Pieroni, 2001; Upadhyay et al., 2011; Reyes-García et al., 2006). Therefore, the aim of this study was to document the various uses of the medicinal plant Geophila repens (L.) I.M. Johnst by the Karbi tribe and to apply quantitative methods to determine the specific importance of these plants for treating particular ailment. G. repens is a very rare plant with high medicinal potential (Roy et al., 2011) and is global distribution is reported from India (Assam, Meghalaya, Andaman Islands and Western Peninsula); Bangladesh; Bhutan; Sri Lanka; Nepal; Malaysia; South China; Fiji; Tropical America; and Africa.

1. Introduction

Over the centuries, the use of medicinal herbs has become an important part of daily life despite the progress in modern medical and pharmaceuticals research. It is estimated that 40% of the world populations depends directly on plant based medicine. India is one of the world’s 12 biodiversity centres. Herbal industry in India uses about 8000 medicinal plants. Indian export of raw drugs has steadily grown at 26% to Rs.165 crores in 1994-’95 from Rs.130 crores in 1991-’92 and this is likely to touch US $5 trillion by 2050. Thus, India has a great role to play, as supplier of herbal products not only to meet the domestic needs, but also to take advantage of the tremendous export potential.

Biotic stress related problems are important bottlenecks for the successful commercial cultivation of any crop. Medicinal plants are not the exception and are vulnerable to be attacked by several pests and pathogens resulting crop loss in terms of both quantity as well as quality. Therefore, the “health of these healthy plants” should be concerned. Without proper identification and prior knowledge of the pests and diseases, the management will be a waste of time and money and can lead to further plant losses.

The litchi (Litchi chinensis) is a delicious juicy fruit of excellent quality. It is liked very much as table fruit. Presently, litchi occupies 940 ha area in Jammu region with an annual production of 2315 MT.

Climate and Soil

Litchi being a sub-tropical fruit thrives best under warm humid sub-tropical climate. However, frost in winter and hot winds in summer limits its growth and production. Hot winds results in cracking of fruits before reaching maturity while excessive rainfall at the time of flowering interfere with pollination. The prolonged dry spell after fruit set reduces the crop considerably.

Litchi flourishes well on deep, well drained loamy soil, rich in organic matter and free from hard substrata.

Ber (Zizyphus mauritiana Lamk.) is one of the ancient and common fruits, indigenous to India. It is growing in wild, semi wild and cultivated forms all over the country in sub-tropical and tropical areas. Area under ber in J&K is 5,376 hectare with annual production of 10,779 metric tonnes.

Climate and Soil

Ber plant is hardy and can grow successfully even under poor soil and unfavourable climatic conditions, where most other fruit trees fail to grow. It prefers a hot and dry climate for its successful cultivation, but needs adequate water during its first fruiting season. It can be grown up to an elevation of 1000 meters above sea level. Excessive atmospheric humidity seems to be a limiting factor in its successful fruiting.

The ber tree develops a deep tap root system with in a short period of its growth and as such adopts itself to wide variety of soils. However, deep sandyloam soils appear to be better for its plantations. It is well known in its ability to thrive under adverse conditions of salinity, drought and water logging.

Ice bank cooling: Storing of fruit and vegetable in storage chamber with positive ventilation and system countries where ice formation is allowed during night time (as electricity cost of night is less as compared to the day time). Melting of ice occurs during day time and with proper air circulation by means of ventilation process, approximately 0.5-1⁰C temperature with 90% RH in the chamber is maintained. Ice Bank Cooler / Air forced cooler leads to desiccation of the produce (Plate 139). So use forced air high humidity cooler and these are known as Ice Bank Cooler. Ice bank coolers are useful for strawberry.

Lab coat: A loose white coat with deep pockets that is worn in a laboratory or medical office.

Labelling: It means any written, printed or graphic matter that is present on the label, accompanies the food or is displayed near the food, including that for the purpose of promoting its sale or disposal. After packaging, labels are required on the finished products intended for distribution and sale. Labelling can reflect on the quality of the product. It must be clear and informative. Information includes Name of the Manufacturer, Date of Manufacture, Net Weight, Gross Weight, Best before etc. Proper storage is needed for maintenance of the quality. Storage must be done only at recommended temperature, relative humidity, light and air / oxygen and carbon dioxide conditions etc. to maintain the quality of the food product. Label may include tag, brand, and pictorial or descriptive matter, written, printed, embossed, graphic, perforated, stencilled or stamped impressions. It is attached to container, cover, lid, or crown of a food package.

Laboratory: A place equipped for experimental study in a science or for testing and analysis. Broadly, it is a place providing opportunity for experimentation, observation, or practice in a field of study.

Lacquer: It is a colloidal dispersion of a solution of cellulose derivative, resin and plasticizer in solvent and diluents, where in all these constituents dried in air by evaporation of solvents, thus yielding a transparent, hard and water proof film.

Objective Methods: Objective Methods are used for evaluation of food quality. These are based on recognized standard scientific tests to any sample of the product without regard to its previous history. They represent the modern idea in quality control (QC) because the human element has been excluded. This method divided into three groups like physical, chemical and microbiological. The devices are used in this evaluation.

Obligate anaerobes: These microbes do no grow in the presence of oxygen.

Obligate parasite: Obligate parasites is host specific and grows on living host only and attach limited range of host and are very difficult or impossible to grow on artificial culture/media.

Obligate thermophile: These microorganisms grow at a temperature between 38-80^oC.

Oenology: Treatments used to prevent spoilage of wine is called oenology. It is synonym to that of enology.

Vacreation: The pasteurization of the milk or cream under reduced pressure by direct steam is called vacreation.

Vacuum: The state of negative pressure. It is equal to atmospheric pressure minus absolute pressure.

Vacuum cooling: A technique of cooling vegetable (leafy vegetables, asparagus, brussels sprouts) having a high surface to volume ratio; rapidly and uniformly by boiling off some of their water at 1⁰C and at low pressure (5 mm of Hg) into a sealed container. The produce is cooled by evaporation of water from the tissue surface and is more rapid than hydro cooling.

Wafer: A thin crisp cake, candy, cracker or chips is known as wafer.

Waffle: A crisp cake of batter baked in a waffle iron is called waffle

Warner-Bartzler Shear: It is one of the oldest but commonly used devices used to measure the tenderness of meat. It is used to test the quality in the cooked meat

In spite of its importance, little has been done to assess interactions of climatic variability with productivity performance of different livestock species, sustainability of livestock production systems, livestock based livelihoods and application of science of climate change on small holder and subsistence livelihoods. The climate and its change affect all productive traits and physiological functions of farm livestock and related livelihoods. Heat stress is the most detrimental constraint to livestock production, particularly in mountainous regions. Introduction and selection for highly productive animals and breeds has increased their susceptibility to adverse impacts of climate change. It is necessary to incorporate resilience through selection and breeding for thermo-tolerance and development of adaptable breeds. Modifications in shelter designs and management of production facilities will also be helpful in mitigating adverse climate impacts on animal production and health. Modern animal husbandry practices that target increased per animal productivity allow efficient utilization of feed nutrients and increase returns from fewer animals. Livestock need to be looked for their immense contribution to nutritional security and livelihoods. A well designed livestock production system is among the best ways for sustaining and improving livelihoods and this chapter details the possible options.

“It  is not uncommon for animals to exhibit behavioral changes before an impending disaster. Wild animals often vacate areas, gather in strange groupings and sometimes will even enter into human habitats they normally avoid,” animal behavior expert Diana L.Guerrero said.Three days before the earthquake, thousands of toads roamed the streets of Mianzhu, a hard-hit city where at least 2,000 people have been reported killed.

Employee motivation and job enrichment are described as two management techniques used to improve human behaviour and attitude towards work, with a view to utilize available human resources more efficiently and thus make man-management more effective. Just as the employee has certain wants that the organization is expected to satisfy, the organization too expects certain types of behaviour usually termed as ‘Direction’ or ‘Motivation’. Obviously this managerial function is not so easy, as it involves many problems, and it is these problems and their possible solutions that one is concerned.
Job enrichment is also a motivational problem created by the alienation of employees from their work, or by lack of their interest in their work. Here the problem is how to make the work more interesting, purposeful and acceptable to employees so that they may perform it more enthusiastically and with a greater sense of responsibility. Like motivation this is also a problem of human behaviour and work attitude. In fact both employee motivation and job enrichment are the problems which every supervisor and manager has to face while working and making their subordinates work.

Dairy industry has long dealt with issues of food pathogens and inadvertent adulteration; it is time to review the plant systems with a new perspective. Each plant has its own handling protocols, physical lay-out and employee policies. Milk and other materials entering the facilities, till the distribution of the finished product needs special attention.
 
I. INCOMING MATERIALS

In general, start by considering the milk, food ingredients, packaging, chemicals and other materials that come into plant facility and warehouses, and ensure that these product streams are secure, and that materials are stored in asecure place.

The primary objective of dairy plant hygiene is to ensure the consistent daily turn-out of safe and clean products which comply with pure-food and public health laws. A secondary and commercially important aim is to preserve the keeping quality of dairy products and so enhance consumer confidence in them. An integral part of a dairy is the quality control laboratory. Continuous testing is necessary for many purposes, including equipment hygiene. Bacteriological standards of dairy products can be maintained only if the raw product is of good bacteriological quality and is protected against contamination from the equipment with which it comes in contact during all stages of processing. 
Many factors may influence the maintenance of dairy equipment in a hygienic condition; the most important are the dairy buildings, the materials and construction of the equipment, personnel, water supply, cleaning procedures, and laboratory control. It is quite impossible to place these points in order of importance, efficient control of dairy plant hygiene being dependent on proper attention to all factors.

Food Hygiene is a scientific discipline describing handling, preparation, and storage of food in ways that prevent foodborne illness. This includes a number of routines that should be followed to avoid potentially severe health hazards. Food can transmit disease from person to person as well as serve as a growth medium for bacteria that can cause food poisoning. Since food hygiene has a direct effect on the health of individuals patronizing the catering facility, it is obligatory on the part of the management to lay down definite guidelines for maintaining hygienic conditions and ensuring their proper implementation. Cleanliness should be the basis of all food hygiene programmes and should be aimed at food protection as well as improving and maintaining the quality of food. 

Noise has become a very important “stress factor” in the environment of man especially with regard to health. However, not much attention is being paid towards its elimination or control in dairy plants. The harmful effects of noise(s) in the workplace as an occupational hazard is really a cause of great concern. Apart from reducing the work efficiency, in the long run it causes serious auditory and non-auditory effects on the worker. Thus, it becomes imperative to set legal standards in workplaces to be monitored constantly to avoid or reduce the health hazards of the workers.

Noise and Noise Pollution

Noise is often defined as “Unwanted Sound” or “Undesirable Sound”. The “Noise Pollution” has been coined to signify the vast cacophony of sounds that are being produced in the modern life, leading to health hazards.

The financial and commercial book keeping that is generally practiced by dairies, the main purpose of which is to ascertain the total results of the business during a given period, does not answer the question whether the costs of processing of milk products and of the various operations involved in manufacturing, are reasonable. For this purpose, dairy plants have to keep detailed records of the expenditure incurred on different components and processes, for planning of production and controlling of costs. In large multi-product dairy plants, production is generally characterized by mixed and joint production and the different operating operations are interrelated. Thus, it becomes difficult to draw a distinction and allocate and apportion the consumption of various services and utilities to arrive at the cost of different operations of various products.
The Bureau of Indian Standards has developed three different sets of records on dairy accounts which may be used to record different information for cost and quality control. These records are:

1. General

In this the nature of objectives of the enterprise i.e. setting up a dairy farm, details of proposed investments, specification of the project area, name of the financing bank branch, status of beneficiary: (Individual/Partnership/Company/Corporation/Co-operative Society / Others) details of borrowers profile in terms of capability, experience, financial soundness, technical / other special qualifications are mentioned.

2. Technical Aspects

    a)    Location, Land and Land Development: This involves the site details of the proposed project. The total land area and its cost. Also, particulars of land development such as fencing, boundary wall, gates are mentioned in it. Thus, site map is also mentioned in this subheading.

    b)    Civil Structures: Several structures like sheds, milking room, store room, quarters for dairy farm manager / labourers are also to be constructed. So, their measurements as well as approximate costs need to be mentioned.

Assumptions

    ·    Freshly calved animals in 1st or 2nd lactation are purchased in two batches of five animals each at an interval of 5 to 6 months.

    ·    Cost of rearing calves not considered as it will be nullified by their sale value or retention value.

    ·    Fodder cultivation considered in two acres and working capital for one crop / season considered. Two crops considered per year.
 
    ·    Manure is utilized for fodder cultivation.

I. Dairy Farm Equipments

A large number of insect pests are associated with stored grains which are directly related to geographical and climatic conditions. There are different estimates on post harvest losses in food. During storage both quantitative and qualitative losses occur due to insects, rodents, and microorganisms. Almost all the insect species may destroy 10.0 - 15.0 % of grain and contaminate with undesirable odour. These pests also helps in transportation of fungi. Some insect pests initiate damage at the ripening stage of crops and continue during storage. Major sources of infestations are old gunny bags, storage structure and old containers (Pruthi and Singh, 1950). The spread and distribution of stored product pests are facilitated by movement of grains from one area to another and by flight of insect pests as some of the adult insects are strong fliers. The cracks and crevices are probable sites for cross infestation. Nearly one thousand species of insects have been associated with stored products in different part of the world. Majority of insect pests belong to the orders Coleoptera and Lepidoptera (Khare, 1994).

Introduction

Agroforestry has vast potential not only to meet the demands of fuel, fodder, timber, medicine and other Non-wood Forest Products but also to enhance green cover, soil and water conservation and reduce pressure on forests. The objective of agroforestry is to take advantage of the complimentary relationships between trees, crops and livestock in such a way that the productivity, stability and sustainability of the total system are maintained. It has great potential in improving degraded and affected sites and has been recognized as a restoration agent, rehabilitation process, and bioremediation mechanism, in addition to increasing farm income.

Agroforestry is not a new practice for the farmers of Tamil Nadu.  It has been in practice in various forms e.g. growing Acacia leucophloea in the grazing lands with Cenchrus ciliaris in the Kangayam tract of Tamil Nadu exists from time immemorial to meet the mixed farming in that tract. In late 60’s farmers in coastal areas of Chengalpattu and Cuddalore districts started growing Casuarina to be sold as firewood.  This effort was entirely of the farmers without any support from the Government.

2.1    Specification Drafting
    
2.2    Methods and Precautions in Drafting Patent Specification
    
2.3    Disclosure Requirements
    
2.4    Patent Claims
    
2.5    Filing of A Patent Application

Semen dilution/ extension is done to meet the following objectives

1.    To preserve the fertilizing potential of semen for a long period of time

2.    To increase the number of services per ejaculate. Ideally approximately 500 cows/ buffaloes can be inseminated from diluted/ extended semen of  a single ejaculate.

3.    Extenders provide the spermatozoa with a medium in which they are able to remain viable and fertile for a prolonged time period.

In order to be an ideal extender, it should be able to provide conducive environment to prolong sperm survival and modify the sperm structure to prepare them for freezing through the following properties:

1.    It should be isotonic with blood and should maintain this during preservation.

While collecting and processing semen the following points needs to be considered:

1.    Good quality Artificial Vagina (AV) should be used for semen collection. Strict hygiene should be maintained while collecting semen.

2.    Highly scientific and flawless collection technique should be used for semen collection.   

3.    Neat semen should be maintained at close to body temperature.

4.    Semen should not come in contact with any contaminant such as lubricant, dust, infection etc. in the collection yard or in any stage of semen processing.

5.    Direct exposure of semen to sunlight or cool white fluorescent light should be avoided as it may cause chromosomal damage.

6.    Enclose all cool white light sources e.g. laminar flow hood, cold room etc. in gold or orange sleeves that absorb ultraviolet and low wavelength visible light (< 475 to 500 nm).

In recent years, a new branch of biological science, called as bio-informatics receives more attention among its users and calls for application of computational statistical algorithms to a greater extent and needs employment of more sophisticated mathematical/statistical tools. Though biological science and information technology forms a major part in bio-informatics research as applied to agriculture, statistical tools act as their backbone. Its utility is more felt starting from the stage of framing of hypothesis till analyzing/interpreting results of a scientific experiment.  It can also be viewed as a three way multi-disciplinary approach with biotechnology, information technology and statistical technology as its three faces, with the principles of statistics applied to biological science through an interface information technology.

Edible bananas are classified into several main groups and subgroups. In the first place is the diploid M. acuminata group which originated in Malaya, Indonesia, the Philippines, Southern India, East Africa, Burma, Thailand, the West Indies, Colombia and Brazil. This group is characterized by dark-brown sheaths of pseudostem,  and the leaves are nearly free from wax. The bunches are small and the fruits small, thin-skinned and sweet. Cultivars of this group are more important in New Guinea than any where else. Lady Finger which was popular in Queensland and New South Wales belonged to this group.

In second place, there was a group represented by the prominent and widely cultivated ‘Gros Michel’ originally from Burma, Thailand, Malaya, Indonesia and Ceylon. It was introduced into Martinique early in the 19th Century by a French naval officer and, a few years later, was taken to Jamaica; from there it was carried to Fiji, Nicaragua, Hawaii and Australia, in that sequence. It is a large, tall plant bearing long bunches of large, yellow fruits, and it was formerly the leading commercial cultivar in Central Africa, Latin America and the Caribbean, but has been phased out because of its great susceptibility to Panama disease. It has given rise to several named sports or mutants (Mortan, 1987). 

4.1    Importance of Banana in International Trade
    
4.2    Major Exporting Countries
    
4.3    Major Importing Countries
    
4.4    World Market Structure for Fresh Bananas
    
4.5    Domestic Trade
    
4.6    Banana Trade Wars : A Glimpse
    
4.7    Fair Trade Bananas

7.1    Pre-Harvest Factors Responsible for Post Harvest Losses
    
7.2    Harvesting Method
    
7.3    Post-Harvest Causes Responsible for Losses

1.    Total horticulture covers an area of 27.1 m ha and production 305.8 m ton in the country annually (Indian Horticulture Database, 2018).

2.    Fruit crops cover an area of 8.4 m ha and vegetable crops 12.2 m ha. Accordingly, 98.7 m ton of fruits and 182.1 m ton of vegetables are produced in the country annually (Indian Horticulture Database, 2018).

3.    Apart from fruits and vegetables, floriculture industry in India comprising of florist trade, nursery plants, potted plants, seed and bulb products is being observed as sunrise industry.

4.    The developed flower market in the country during 2018 is with area of 0.32 m ha with a production of 2.7 m ton flowers.

5.    The traditional flowers are grown on a large area on a commercial scale. These flowers are mostly grown for loose flower purpose.

6.    Area under cut flowers like rose, chrysanthemum, gladiolus, carnation and orchids is increasing day by day.

7.    Plantation crops are another potential sector with lot of opportunities for employment generation, foreign exchange earnings and overall supporting livelihood sustenance of mankind at large.

Nursery: Nursery is a place where seedling, saplings or any other planting materials are raised, propagated, multiplied and sold out for planting.

Importance of a Nursery

1.    The young seedling requires special attention during the first few weeks after germination. It is easier and economical to look after the young and tender seedling growing in nursery bed in a small area than in the large permanent site.

2.    Majority of fruit crops are propagated by vegetative means. The propagules require special skill and aftercare before transferring them in the main field in a controlled condition in nursery, all these can be provided successfully by skilled labours.

3.    Direct sowing method is not successful when compared with transplanting of seedling raised in nursery.

4.    Nursery hardened plants are preferred for causality replacement in orchards.

5.    Besides these, raising of seedling or sapling in nursery provides more time for replanting preparations.

6.    Seasoning of seeding against natural odds is only possible in nursery.

The quantitative increase in plant body such as increase in the length of stem and root, the number of leaves etc., is referred to as plant growth whereas, the qualitative changes such as germination of seed, formation of leaves, flowers and fruits, falling of leaves and fruits is referred as development. Utilization of these substances for proper development of the plant is regulated by certain chemical messengers called plant growth substances or plant growth regulators, which in minute amounts increase or decrease or modifies the physiological process in plants. Plant growth substances are the chemical other than nutrient which required in very small amount but without which plant can not complete their physiology.

The two sets of internal factors, viz., nutrition and hormone control the growth and development of the plant. The raw material required for growth is supplied by nutritional factors which include the minerals, organic substances the protein, carbohydrates, etc.

In an orchard all the fruit trees do not bear equally or regularly and sometimes fail to flower and fruit under similar conditions where another fruit tree bears heavily. This failure to set fruits may be attributed to unfruitfulness. To understand the problem of unfruitfulness in orchards a familiarity with following terms is necessary.

1.    Fruit setting: It refers to initial growth of ovary and its associated parts after blossoming and taking it to maturity.

2.    Fruitfulness: It is the state of plant when it is not only capable of flowering and fruit setting but also takes these fruits to maturity and inability to do so is unfruitfulness or barrenness.

3.    Infertility: Ability of a plant not only to produce fruits but develop viable seeds and the inability to do so is referred as sterility or infertility. All fertile plants are fruitful but all fruitful plants are not fertile (Seedless fruits).

4.    Self fruitfulness: Ability of a plant to mature fruits after self pollination.

Origin and history: Papaya has long been known as wonder fruit of the tropics and is one of the five major fruit crops of tropical world, papaya fruits throughout the year and a remunerative fruit crop which is grown in almost every part of the country. It gives maximum yield per unit and income next to banana. It is generally grown as fruit plant in kitchen garden, home garden or nutrition garden and later as commercial fruit. It is also planted as a filler plant in a fruit orchard. India is the second largest producer of papaya in the world after Brazil. It is a fruit native to tropical America and commercially grown in many parts of the world viz., Australia, Hawaii, Taiwan, Puerto Rico, Peru, Florida, Texas, California, South Africa, Pakistan, Bangladesh and India. In India, it was introduced by Portuguese in 1611. It is grown in Karnataka, Bihar, Kerala, Tamil Nadu, Assam, Gujarat, Maharastra, Andhra Pradesh, Madhya Pradesh etc.

1.    World Export/Import of Ornamental Plants
    
2.    Recent Trends
    
3.    Flower Auctions
    
4.    Domestic Trade of Flowers
    
5.    Marketing Channels and Price Spread in Traditional Flowers
    
6.    E-commerce in Floriculture
    
7.    On-line Information Systems Dealing with e-floriculture
    
8.    Flower Auctions
    
9.    Floriculture and WTO
    
10.    Documentation Indexing
        
    Further reading.

1.    Placement
    
2.    Growing Media
    
3.    Media Preparation
    
4.    Containers
    
5.    Potting
    
6.    Propagation
    
7.    Watering
    
8.    Feeding
    
9.    Diseases
    
10.    Precautions
    
11.    Indoor Plants

Synchronization of estrus is making a group of cows to come into estrus at the same time.  Effective estrus detection requires much time, labour, skill and expense and it is a major limiting factor in artificial insemination programme in cattle.  It was the principal stimulus that led to research in the development of progestational and prostaglandin compounds. 

Advantages

1.     Improve the efficiency of heat detection

2.     Management tool, better planning of breeding activities and wider use of artificial insemination 

3.     Solve problem of unobserved estrus

4.     Maintain short calving interval

5.     Overall improvement in herd productivity and reproductive efficiency

6.     Controlled lactation

7.     Management of replacement heifers

8.     Useful in embryo transfer programmes

9.     Reduce labour

10.     Possibly reduce involuntary culling for reproductive reasons

Buffaloes, though have great production potential, do suffer with many reproductive problems viz.  delayed age of puberty and  sexual maturity, weak / silent estrus, longer inter-calving period,  seasonality in breeding, poor libido  and poor semen quality. Little information is available about the buffaloes as compared to cattle because all the time we try to apply the knowledge available about the cattle to the buffalo.  Some comparative reproductive parameters in cow & she buffalo & cow bull and buffalo bull are depicted in Table 8. 1 and Table 8.2 respectively.

Laparoscopy is an operative procedure performed through a key-hole opening with a rigid endoscope that allows visual inspection of organs.  The laparoscopy helps in arriving diagnosis of various reproductive and digestive disorders quickly.  By laparoscopy clinician can visualize the external surface of the abdominal organs.  Tumours, abscess, cyst, lesions, growth, hemorrhage, adhesions of the organs in the abdominal cavity can be readily diagnosed by this technique.  Aspiration of follicular fluid, biopsy of lesions and sterilization are commonly employed maneuvers by this technique.  It is having both diagnostic and therapeutic value.  The procedure consists of placement of transabdominal rigid endoscope after establishment of pneumoperitoneum in the body cavity.   The images of different organs are displayed on the TV monitor when the laparoscope is moved within the peritoneal cavity with the illumination through halogen light source.

Buffalo plays an important role in Indian livestock economics.  India has more than the half of the world buffalo population, contributing 50% of total milk production of the country.  The buffalo is said more productive than an average cow due to the higher fat percentage (7%) in the milk, better feed conversion ability and disease resistance.  Buffaloes have lower reproductive efficiency in the form of delayed age of maturity, longer calving interval, weak / silent estrus, seasonality of breeding, poor libido and poor semen quality. A large number of buffaloes do not conceive due to some gynaecological problems and are being slaughtered every year.  The most commonly observed reproductive disorders are detailed below.

There is no rapid direct test to determine fertility of semen sample. During freezing and thawing of semen 20-80% of the spermatozoa become immotile or die. In addition to this, there may be damage to spermatozoa by disintegration of sperm cell membrane and acrosome leading to loss of intracellular enzymes.   The only reliable method to evaluate the semen is to inseminate a cow and get a calf at the end of gestation period.  Now-a-days new methods have been developed for in-vitro assessment of fertility of spermatozoa.  Some of these methods are exhaustive, time consuming, need for a full fledged analysis and difficult under field conditions.

Q.1.    What is the most fundamental assumption to be followed by random variable for using the standard method of parametric statistics or parametric inference ?

    Answer
    
    The most fundamental assumption required to be followed by random varibale for using the parametric statistics to have statistical inference drawn from certain set of data is that the random variables have normal distribution.

INTRODUCTION
 
Once a crop is harvested, it is almost impossible to improve its quality. Therefore, proper storage conditions—temperature and humidity—are needed to lengthen storage life and maintain quality once the crop has been cooled to the optimum storage temperature. In modern times, the storage of perishables has become more sophisticated because of the demand for a wide range of fresh fruits and vegetables at all the times of the year and because of need to spread peaks of production over longer periods to maximize profit and reduce waste. But in our conditions, storage of fruits and vegetables is practiced to avoid the low prices during the glut season in anticipation that prices will increase during the lean period or off-season. Certain crops like potatoes and apples can be stored for long period whereas for the crops peach and plum, the storage period is very short. However, for both long-term as well as short-term storage, high level of technical know-how about the crop is necessary for successful storage. There are a few important factors, which need to be taken into account before storage of the produce.

Sequence Alignment

Sequence Alignment is the procedure of comparing two (Pair-wise Alignment) or more (Multiple Sequence Alignment) sequences by searching for a series of individual characters or character patterns that are in the same order in the sequences.

Significance: Discovering functional, structural and evolutionary information in biological sequences.

Motif

1.    A nucleotide/amino acid sequence pattern having biological significance.

2.    Occurs repeatedly, either in same molecule or in many molecules. Found in upstream intergenic region.

3.    Functionally important regions of genome (gene) can be recognized by searching such patterns.

4.    Used for locating binding sites, regulatory signals, to control gene expression.

5.    Identifying potential drug target sites.