eChapters

Agriculture depends mainly on natural resources like land situation, soil, water and a favourable climate. Continuous agricultural practices adopted without conservation of such precious resources may lead to unsustainability of growth in agriculture. Conservation of these resources and their sustainable use with appropriate measures would be required for a sustainable agriculture.

Modern farming system was aimed to maximise crop production by use of high yielding crop varieties or hybrids and application of agro-chemicals like fertilisers and pesticides along with irrigation and better crop production technologies. But without consideration of its impact on the environment and economics of the farmers, the monoculture of rice and wheat with agro-chemicals caused land degradation, soil and water contamination, gene erosion and environmental pollution.

Alternative agriculture is a production system that follows the concept of agroecology and does not use conventional methods. Natural farming, Bio-dynamic farming, Organic farming, Permaculture, Homa farming and many others are considered as alternative agriculture. In spite of some differences, these practices aim at preserving the environment and minimise the use or avoid synthetic agrochemicals. They rely on natural cycles, by using crop rotations, cover crops or no-tillage, etc.

Soil is made up of minerals, organic matter, gases, liquids and micro-organisms in different proportions. It provides anchorage to plants. It is important for life as it provides the medium for the growth of a plant, habitat for several insects and other organisms. Soil is a store house of nutrients, micro-organisms, air and water. It is the source of four essential ‘living’ factors including food, clothes, shelter, and medicines.

Soil, climate and water decide the nature of crop to be grown in a particular region. While soil and climate can be manipulated to certain extent, there is no substitute of water. Water is governed by the hydrological cycle. The major source of water is rainfall which has been reduced over the years due to climate change. The per capita water availability in India was 4944 m3 in 1955 which has been reduced to 1750 m³ now and is expected to come down to 1500 m³ by 2025.

Insects and mites that damage crops, pathogens that cause diseases in plants, weeds that compete with field crops for nutrients and water, plants that choke irrigation channels or drainage systems, rodents that eat young plants and grain, and birds that eat seedlings or stored foodstuffs are all crop pests. As plants were domesticated and grown, increasingly in monoculture, the potential damage caused by their co-evolved pests and disease pathogens were realised.

Farming system is a complex inter-related matrix of soil, plants, animals, implements, power, labour, capital and other inputs controlled in part by farm families and influenced by varying degrees of political, economic, institutional and social forces that operate at many levels. In farming system there is integration of farm enterprises such as cropping systems, animal husbandry, fisheries, forestry, sericulture, poultry etc.

Natural resources are naturally occurring resources which can be exploited for economic gain. They include raw materials such as fuels, minerals and metals, soil, water, air, sunlight, land, biomass and ecosystems. Natural resources also include living (biotic) and non-living (abiotic) materials. Natural resources are gifts of nature for the humankind.

Food security is achieved when adequate food is available and accessible and satisfactorily used and utilized by all individuals to live a healthy and active life. But food and nutrition security is achieved when people have physical, economic and social access to food of sufficient quantity in terms of variety, diversity, nutrient content and safety to meet their dietary needs and food preferences for a healthy and active life coupled with sanitary environment, adequate health and education care. In order to achieve food and nutrition security there is a need for transitioning toward nutrition sensitive food system.

Conservation Agriculture Conservation agriculture is an approach to managing agro-ecosystems, for improved and sustained productivity, increased profits and food security while preserving and enhancing the resource base and the environment. It is a set of technologies, including minimum disturbance, permanent soil cover, diversified crop rotations, and integrated weed management (Reicosky and Saxena, 2007; Hobbs et al., 2008, Friedrich et al., 2012).

Climate change is a long-lasting change in the statistical distribution of weather pattern triggered by greenhouse gas (GHG) emission. It is caused by natural factors like continental drift, volcanoes, earth’s tilt, and ocean current or manmade factors like urbanization, industrialization, burning of fossil fuel, deforestation and faulty agricultural practices.

Agriculture is a fundamental human activity that depends intrinsically on natural processes, including soil fertility, water recycling, and pollination, and both nature and agriculture are increasingly suffering the negative impacts of climate change (EEA, 2019). At the same time, unsustainable agriculture also poses a major threat to biodiversity (Secretariat of the Convention on Biological Diversity, 2014), negatively affects the state of our soil and water, and is an important contributor to climate change (Jia et al., 2019).

Pump is a mechanical device to increase the pressure energy of fluid. Aquacultural enterprises often find it necessary to move fluid against an energy gradient. Most commo n may be filling or emptying of tanks. For performing an assigned job, the best selection of pumps should be such that it should work at its peak efficiency. Unfortunately, there is only one head and discharge condition for each pump where the peak efficiency is obtained and therefore, it is rarely possible to achieve the highest efficiency for a pumping condition. Manufacturers cannot design and build so many varieties of pumps to meet all operating conditions. They have therefore, settled upon some standard designs which are generally required for most of the head and discharge conditions.

Aeration is the addition of oxygen or air containing oxygen to water. Any aquatic species important for commercial purpose requires oxygen. Even photosynthetic plants need oxygen when it is dark.

2.1 Need of aeration

Rise in atmospheric temperature causes increased rate of biological degradation of organic matters and subsequent depletion in dissolved O₂ concentration in water.

The feeding is an important operation in aquaculture, it is the process of providing nutritious supplements or live feeds to the culture animal. The equipment used for this purpose is named as feeders. Equipment that is connected with fish feeding can be divided into three major groups, as follows

Filtration may be defined as the separation of a mixture or solution into component parts. The resulting components may be pure or may be solutions or mixtures. In water/wastewater treatment filtration technique is used for removing suspended solids, dissolved solids and organic matter.

Harvesting is a complex operation that can be divided into three major parts, as follows:

Driving and concentrating the fish stock to the catch basin;

Lifting the fish out of the catch basin and placing them on a sorting table;

Sorting the fish and loading them on the transporting vehicle.

Material handling includes a number of operations that can be executed either by hand (manual) or by mechanical means or devices to convey material and to reduce the human drudgery.

The most common types of mechanical devices for grain handling are;

The oxygen content may be measured either chemically or electronically. The normal chemical method is the so-called Winkler method which is a titration method, consisting of adding certain chemicals to the water and observing a colour change which will be directly related to the oxygen concentration.

The world’s largest population of milch cattle lives in India. In 2020, there were almost 906 million tones of milk produced worldwide, with India being the top producer with a 22 percent share. Annual Growth Rate of milk production in 2019-20 in India was 5.69 per cent. Highest growth rate in milk production was found to be 14.31 per cent in Karnataka. In 2021, the Indian dairy market had a value of INR 13,174 billion.

India has an enormous wealth of cattle, which is crucial to the development of the socioeconomic status of millions of rural households as well as the country’s economy. In addition to giving millions of people access to lowcost nutritious food, this industry plays a significant role in boosting family incomes and creating gainful employment in rural areas, notably among landless laborers, small and marginal farmers, and women.

All across the world, the dairy industry is facing numerous problems and changes. Dairy development has received a considerable boost from factors including access to technical advancements, improvements in infrastructural facilities, and the development of modern marketing insights. It is interesting to see how the dairy sector is changing globally.

In India, the Ministry of Health and Family Welfare (MOH&FW), dealing with the subject of food quality and safety at the national level, has been designated the nodal ministry for maintaining food standards. The instrument for ensuring food quality and safety at the national level is through a legislation titled Prevention of Food Adulteration Act, 1954 (PFA) and Rules made there under as amended from time-to-time.

The world’s greatest source of cow and buffalo diversity is India, and countries like Australia, South Africa, Latin America, and the USA employ Indian cattle breeds to grow their livestock industries. The number of cattle in the nation represents 17% of all cattle in the world. 22-25% of the Indian cow population is made up of the best native milk, draught, and dual-purpose animal genetics. The majority of local cattle breeds are excellent drafters. Native livestock breeds are clearly superior in their use of subpar feed, have better heat tolerance, and greater resistance to tropical diseases.

India is home to an enormous number of buffalo. According to the 20th Livestock Census, more than 109 million buffaloes, or more than 56% of the world’s population, are living in India. With 20 recognized breeds, it also has a very diverse collection of buffalo genetics. One of the most well-known buffalo breeds in the world, the Murrah, is also found in India. The buffalo is a versatile animal that can be used for milk, meat, and draught. India is the world leader in this industry, producing 76% of the world’s buffalo milk.

Dairy farmers are faced with a number of fundamental inquiries. The first inquires as to what dairy animal he needs to keep. Is the breed with the best production performance the one that has adapted to the local environment the most? What animal is the best, asks the second? Is it the one with a showwinning conformation or the one with a strong ancestry? Is the ideal dairy cow one that produces the most milk, has the best feet, legs, and udder support, or combines the performance of these characteristics in the best possible way?

Herd management practices in the handling, nutrition, milking techniques, sanitation, and housing of dairy animals play key roles in predisposing the individual animal as well as herds to diseases. The key factor influencing the reduction of health issues are the decisions made by herd managers or animal owners.In order to maximize output and profitability through disease control, herd management approaches in conjunction with a veterinarian programme can be most beneficial.

The proper supply of feed and fodder is a requirement for the growth and development of the animals. Over the past few decades, there has been a considerable growth in milk production, with India now producing the most milk in the world (187.7 million tones in 2018–19). The main causes of India’s low milk yield are extrinsic (poor nutrition/feed management) as well as intrinsic (low genetic potential).

In terms of their contribution to human nutrition, the dairy industry is very important. Since dairy farming has the ability to offer meaningful selfemployment and stable income, it is a dependable source of subsistence for the rural poor. Additionally, it requires less labour and cash to maintain. Dairy cattle feeding directly affect the animals’ ability to reproduce and produce. Therefore, the addition of a mineral mixture is necessary to maximize the animal’s productivity and milk output.

For the purpose of passing into the lower gastrointestinal tract and supplying the cow with vital amino acids, dairy bypass protein (UDP – undegraded protein) is a type of animal or plant-based protein that resists breakdown in the rumen. More metabolizable protein is made available by avoiding the rumen, assisting the cow in meeting her needs for amino acids for milk production and its constituent parts.

Dietary fat, which is not degraded in upper part of digestive tract (rumen) of animal, but gets digested in lower alimentary tract is known as bypass fat. Rumen protected fat is another name for this bypass fat. Immediately following calving, dairy animals lose a significant amount of energy through milk, although their feed intake is decreased. Animals continue to have negative energy balances as a result.

By minimizing the harsh climate effects like heat, cold and rain, it is crucial to offer the proper circumstances for raising dairy cows in the tropics. Stress can be reduced through the design of the farm and the dwelling. Controlling the environment lowers the risk of stress and disease, improves management, and increases milk production.

Dairy farmers hope to have better milking cows than those in their current herds. A solid foundation is necessary for every farming operation. Undoubtedly, the dairy farm documentation system is among the most important facets of farm management. Tracking each cow’s productivity within a herd and assisting breed development generally are the major objectives of a dairy farm tracking system. This information could be referred to as production data.

Animals need to function efficiently during reproduction in order for a dairy production system to be sustainable. This is necessary to produce milk, the primary product of interest, as well as to supply replacement animals. From the perspective of reproduction, delayed puberty, lengthy calving intervals, limited productive lives, and high calf mortality are the key variables that cause economic losses. Reproductive management’s proportionate contribution to the effectiveness of dairy production systems varies greatly.

Letting the cow to release its milk so the dairy farmer can extract it for personal use or to sell is the procedure of milking. Consequently, it is not totally a natural process. The natural process must be manipulated by the dairy farmer to his advantage. Therefore, in order to control the natural process, one must first understand it. The process of producing milk from blood-derived basic materials by alveolar cells and storing it in the alveolar cavity is known as milk secretion. Only when the alveolar cavity is full and the pressure on the alveolar cells prevents further secretion does this continuous process come to an end.

Operation Flood and dairy cooperatives became India’s greatest rural employment programme, enabling the modernization of the dairy industry to a point from where it may take off to fulfill the need for milk and milk products within the nation as well as chances on the international market. An unorganized sector handles 80% of the milk a rural producer produces, and an organized sector handles the remaining 20%. It has been discovered that dairy cooperatives significantly contribute to reducing rural poverty by increasing rural milk production and marketing.

The cradle-to-grave dairy supply chain includes a number of operations that result in greenhouse gas (GHG) emissions related to milk production. These activities broadly include the use of agricultural inputs like fertilizers, fossil fuel for the production of animal feed and fodder, processing concentrates in cattle feed plants, enteric fermentation, manure management, and post farm gate activities like processing milk at dairy cooperative societies, milk unions, its conversion into different milk products, and their distribution through retail supply chains.

The Indian economy, which meets its own dairy demands, has reached a turning point with its bovine breeding initiatives. The viability of this enterprise, however, depends largely on completing as many successful artificial insemination cycles at a cattle farm. Estrus behaviour observation is used to determine when artificial insemination should take place. But since not all cattle exhibit substantial estrus symptoms, insemination results are not always reliable. An estrus detecting instrument known as an Electronic Nose (eNose) is created to address these issues.

The International Ergonomics Association (IEA) defines ergonomics or human factors as the scientific discipline concerned with the understanding of interactions among humans and other elements of a system, and the profession that applies theory, principles, data and methods to design to optimize human well-being and overall system performance.

Physical ergonomics is concerned with human anatomical, anthropometric, physiological and biomechanical characteristics as they relate to physical activity. This is the ergonomics domain we are most concerned with in the workplace, and most of the content on this site is very much focused on workplace ergonomics.Physical ergonomic principles have been widely used in the design of both consumer and industrial products for optimizing performance and to preventing / treating work-related disorders by reducing the mechanisms behind mechanically induced acute and chronic musculoskeletal injuries / disorders.

There are 8 fundamental Ergonomic Principles for better work performance which help you identify ergonomic risk factors and maintain your stellar safety record.
• Maintain neutral posture
• Work in power zone
• Allow for movement and stretching
• Reduce excessive force
• Reduce excessive motion
• Minimize contact stress
• Reduce excessive vibration
• Provide adequate lighting

The parent material to which a coating or plating is applied is known as the base material. The phrase base material is used to distinguish the overall part, numerous layers, and the original base material. Coating, electroplating, welding, and soldering all depend heavily on base materials.

Anthropometry is the study of the measurement of the human body in terms of the dimensions of bone, muscle, and adipose (fat) tissue. It is a branch of anthropology dealing with measurements of human body to determine difference in groups and individuals. The word “anthropometry” is derived from the Greek word “anthropo” meaning “human” and the Greek word “metron” meaning “measure” (Ulajaszek, 1994).

The rate of consumption of time and energy in task completion is affected by the work area. The work area is composed of the height, available space of the work surface, the location of the equipment, materials, and supplies being used. The work surface should be at the optimum height for the position you assume in task completion. This means if you are standing, the surface height should be slightly below your waistline.

The level of motivation of an individual has a definite relation to the fatigue experienced while doing any work. When a person dislikes a task, motivation to do is low and fatigue sets in faster. Interest in job produces high motivation and prevents fatigue. Besides the way of carrying a task is of great concern if we want to maintain our right posture, in order that we do not have to face any musculoskeletal disorders.

Work simplification is the conscious seeking of the simplest, easiest, and quickest method of doing work. It describes the making of daily tasks easier in order to reduce strain or to decrease the amount energy required to complete an activity. Work simplification research consists of making motion and time studies of the work as it is being done, analyzing the work methods, developing the easiest and most effective way to do the task and putting the new method into use. Time and energy are closely related and if these are blended properly the work of the housewife will be much simplified.

Home cooking is all about simple, tasty and healthy food brought from the kitchen to the dining table. But oftentimes, preparing the food can be timeconsuming and tedious. With the right list of basic kitchen tools, utensils and appliances, we can make cooking more enjoyable and a lot easier. These appliances can also motivate us to think of creative new recipes to delight our loved ones.

Appliances which help or assist in doing household work as cooking, cleaning and food preservation are known as equipments. A equipment also referred to as a domestic appliance or an electric appliance or a household appliance.

Today, we have spoons made of different sizes and materials such as metal, wood, plastic, ceramic or a combination of two or more materials. The most popular material is the stainless steel. Spoons are used primarily for eating liquid or semi-liquid foods, such as soup, stew or ice cream, and very small or powdery solid items which cannot be easily lifted with a fork, such as rice, sugar, cereals and green peas.