eChapters

A vacuum cleaner, also known as a sweeper or hoover, is a device that uses an air pump (a centrifugal fan in all but some of the very oldest models), to create a partial vacuum to suck up dust and dirt from fl oors and from other surfaces such as upholstery and draperies.The dirt is collected by either a dustbag or a cyclone for later disposal. Vacuum cleaners, which are used in homes as well as in industry, exist in a variety of sizes and models—small battery-powered hand-held devices, wheeled canister models for home use, domestic central vacuum cleaners, huge stationary industrial appliances that can handle several hundred litres of dust before being emptied, and self-propelled vacuum trucks for recovery of large spills or removal of contaminated soil.

A microwave oven, commonly referred to as a microwave, is a kitchen appliance that heats and cooks food by exposing it to electromagnetic radiation in the microwave spectrum.

The domestic electric food juicer/mixer/grinder has become an integral fixture in the typical modern kitchen. Generally functional as liquidizers, grinders and juicers, this paraphernalia comes in handy for grinding/pulverizing/powdering dry foodstuffs either raw or roasted (cereals, grains, masalas, coffee seeds, etc.), for mixing liquids and for converting food— with or without the presence of water (or vegetable oils)—into forms of slurry or pulps. It is also used for extracting juice from fruits or vegetables.

The refrigerator (called a ‘fridge’ by most people) is a box like equipment which uses electricity to keep the temperature inside the box lower than the atmosphere outside. Food kept at such a low temperature thus does not spoil for a long time. The refrigerator also serves the purpose of giving us cold water and ice in summer. By preserving food in the refrigerator, one can delay the growth of bacteria, keep food items fresh and thus save time and energy of the homemaker in meal preparation.

A washing machine laundry machine, clothes washer, or washer) is a device used to wash laundry. The term is mostly applied to machines that use water as opposed to dry cleaning (which uses alternative cleaning fluids, and is performed by specialist businesses) or ultrasonic cleaners. The user adds laundry detergent which is sold in liquid or powder form to the wash water.

Washing dishes is not the most rewarding task. Cooking can be creative, but cleaning up afterward seems like a waste of time and leaves the person washing complaining about “dishpan hands.” The development of the dishwasher has helped relieve some of the monotony, as well as the grease and grime.

Electric Cooking Range is also known as an electric stove or electric range; is a stove with a built-in cooktop and with an integrated electrical heating device to cook and bake. Electric stoves became popular as replacements for solidfuel (wood or coal) stoves which required more labor to operate and maintain. “Cookstoves” (also called “cooking stoves” or “wood stoves”) are heated by burning wood or charcoal; “gas stoves” are heated by gas; and “electric stoves” by electricity. Unlike gas stoves, electric stove tops don’t produce a flame.

A solar cooker or solar oven is a device which uses the energy of sunlight to heat food or to cook it or sterilize it by means of reflective panels that concentrate the light on to a dark coloured pot in an insulated box.

To learn the design and arrangement of space in the kitchen which is the key in the pattern of living, the number of people to be served in the area, the size of the house and the equipment and furnishing in the kitchen. To know the most important aspect to consider in planning a kitchen i.e., the nature of the primary and secondary activities to be performed in the kitchen.

Every homemaker spends a chunk of her time in the kitchen. Kitchen is the most functional part of the house. It needs to be carefully designed. Kitchen ergonomics comes into play to make the kitchen a comfortable place to work. Kitchen ergonomics is all about minimizing the movements and stress we have to go through while cooking. While designing your kitchen you need to keep in mind the heights of various surfaces, distances and placement of items to make your space functional, efficient and enable effortless cooking.

Market survey and analysis of different types of home appliances available in the market.

Milk is considered to be a perfect food which contains almost all the macroand micronutrients required for normal body growth. However, it is highly perishable in nature which poses problem during its storage. It gets spoiled within few hours after milking if not processed or cooled immediately. It can also be a source of several disease causing microbes as it is conducive for the growth of microorganisms.

High-pressure processing (HPP) is a novel method for non-thermal preservation technique of food that inactivates harmful pathogens and vegetative spoilage microorganisms. HPP is an alternate, non-thermal food processing method, wherein the food is subjected to a very high pressure range from 100 -800 MPa (1MPa = 145.03 Psi or 10 Bar). HPP is also referred as High hydrostatic pressure processing, Ultra high-pressure processing, Hyperbaric processing and Pascalization (Rao et al., 2014).

Electricity is one of the fundamental phenomena of nature. Electricity or electric current is caused due to the movement of charged particles i.e., electrons. Due to the potential difference between two points in a conductor, electron movement takes place. The potential difference between two points is caused due to the difference in charge density. Electron tends to flow from lower potential to higher potential which causes electricity to flow. In general, the electrons flow from cathode (negative) to anode (positive) but in a wire electricity, electrons flow from anode to cathode when connected to a battery or any electricity source.

Thermal heating methods are used from long time to decontaminate the food products from microorganism and therefore increase its shelf life and ultimately make the product safe for human consumption. But these methods diminish the sensory, physicochemical and nutritional properties of food (Barba et al., 2012). Also, the cost of generation of heat in manufacture of food product make the product costlier in thermal processing and also create environmental issue.

The last two decades have seen rapid growth and development in the industrial sector as well as urbanization has increased. Due to globalization and mass production of commodities, the situation in the modern world nothing like ever before. Food and dairy industries are also not left out from this massive expansion. Due to changing behavior and food consumption habits too, there has been a surge in the risk of foodborne illness. This has created a problem in terms of public health and sustainability

Biosensors are the next generation detection devices, use biological sensing elements like enzymes, nucleic acids, antibody, cells, organelles, tissues, receptors; have got varied applications in the field of drug discovery, diagnosis, biomedicine, food safety and processing, environmental monitoring, defense and security etc. Microbial biosensors are analytical device that uses naturally occurring or engineered microbial cells as the recognition elements to detect physiological changes in cells with the help of suitable physicochemical transducer.

Fourier transform infrared (FTIR) spectroscopy is one of the most effective methods for determining the functional groups and potential molecular interactions between membrane chemical molecules. Understanding of (infrared) IR absorption band placements in the spectrum as wave numbers can be used to identify the various chemical constituents (such as aromatic amides) that may not be visible by X-ray photoelectron spectroscopy.

Enzymes (biological catalyst) can be defined as a substance which initiates or fastens the reaction rate, without being consumed during the reaction. Enzymes function as a catalyst in various biological processes taking place in all life forms. Although enzyme synthesis takes place inside living cells, they can even function as a catalyst in the in vitro processes, which makes it suitable for many industrial applications. For product formation in any chemical reaction, reactants or substrates has to overcome the transition state.

Starch is the most abundant polysaccharide carbohydrate reserve which is available in different parts of plants such as roots, stem, leaves, seeds, flowers, and fruits. It is considered an excellent source of energy and plants utilizes carbon from it for their metabolic activities (Smith, 2001). It is composed of glucose units linked together by glycosidic bonds to form amylose and amylopectin polymeric chains (Abbas et al., 2010).

The term nanoscience defines controlling or modifying the shapes and sizes of the materials such that they lie in the range of a nanometre (1 nm = 10^-9 m) scale, typically 1-100 nm (Chavada et al., 2016). The application of these materials and systems by their suitable designing and production is what is known as nanotechnology. Richard Feynman, in 1959, first discussed the possibility of this advanced technology. However, the term was first used by Norio Taniguchi in 1974 (Chavada et al., 2016).

The exploration of facts about healthy and nutritious food has increased over the years. The advent of advance scientific tools has elucidated facts regarding the role of diet or nutrients in regulating gene expression (Sales et al., 2014). Various studies based on molecular interactions in food has revealed that many dietary components such as proteins, carbohydrates, fats, minerals, vitamins and phyto-constituents has the tendency to regulate gene expression.

Milk, commonly referred to as the “ideal food,” is an essential source of nutrition for human consumption. Because of the growing human population and the rising demand for milk and milk products, there is more interest in and concern about the quality and safety of dairy products. Milk comprises chemical substances with various functions in the human body, such as carbohydrates, lipids, proteins, and trace elements (vitamins, minerals, etc.) (Guetouache et al., 2014).

The term “plant health” has two overlapping meanings. In the more specific meaning, plant health refers to plant quarantine, while in the less specific use, it covers all areas of plant protection, such as plant pest management, plant quarantine, and pesticide regulation and application.

Disease in plants defined as the series of invisible and visible responses of plant cells and tissues to a pathogenic organism or environmental factor that result in adverse changes in the form, function, or integrity of the plant and may lead to partial impairment or death of plant parts or of the entire plant.

With some important exceptions, applied plant pathology was for many years rather single minded. It aimed at eradication or total exclusion of a plant disease , and it relied largely on a single control method, application of chemical poisons.

1. Detection means the existence of whatever do you want detecting but diagnosis is that the analysis in depth of existing thing.
2. Objectively look for, listen to the credible complains, symptoms that is sometimes not visible at all.
3. It is art or skill of identifying some abnormalities, i.e. which is below or higher than the normal permissible range/threshold.

Decisions need to be taken by the farmer as to how to implement disease management in the most effective and economic manner. Many of these decisions are taken a long time before any diseases appear, such as the crop rotation, time of planting, amount of fertiliser, etc. During the growing season, however, continual decisions need to be made regarding disease management.

Integrated disease management includes use of physical, cultural, biological, chemical and biotechnological for disease management. It may comprise computer aided sampling, decision making, improved farm tools & equipment.Farmers are the primary decision makers in Integrated disease management programs. They have to decide individually and collectively how to manage all diseases that may harm crops.

Integrated disease management (IDM) needs competence in three broad areas
I. Prevention
II. Monitoring
III. Intervention

The techniques used in disease management mainly based on two principles,: Prevention or prophylaxis and cureThe first principle prevention includes disease management tactics applied before infection i.e., the plant is protected from disease. It includes: avoidance, exclusion, eradication, resistant&protection. Second principle curative action: functions with any measure applied after the plant is infectedi.e., the plant is treated for the disease.It includes therapy.

The Food and Agriculture Organization (FAO) estimates that up to 40% of food crops are lost due to plant pests and diseases annually. Such losses not only threaten global food security but also have the potential to limit food access due to unavailability of food, or sharp increases in food prices. But this challenge is also an opportunity to find new ways to help crops better withstand adverse conditions in a farmer’s field.

Pesticides have a direct impact on agricultural economy and food security. The presence of spurious, fake, illegal or duplicate pesticides in the market result in losses of yield and farmers’ income. Over 30% of plant protection chemicals sold in India are not registered, fake, sub-standard, misbranded, counterfeit, unapproved and illegitimate pesticides, bio pesticides and bio-stimulants. They are developed by passing regulations and field trials.

In order for a plant to become diseased, three conditions must be present: (1) a pathogen, (2) a favorable environment and (3) a susceptible host. All the strategies we use to manage plant diseases work to remove or limit one of these factors, thus breaking the plant disease triangle. The key to sustainable plant disease management is to establish an agro- ecological system that is favorable to plant growth and development at the population level and adverse to pathogen evolution and epidemic development based on interactions among plants, pathogens, vectors and environment.

Of late, there has been a growing trend for individuals and companies to “Go Green” or be more environmentally friendly. There has also been a opinion that natural and organic products are healthier or safer. The pest control industry has responded to these changes in our culture and business markets with innovations in products, materials, and methods. Requests for “organic” based services have grown to a point where most pest control providers offer services that use only natural pesticides.

First aid is the initial treatment of a person suffering from a pesticide exposure, before seeking proper medical attention. The first action is to remove the person from the source of the exposure by removing pesticide from the skin, removing contaminated clothing, or getting the person to fresh air. While doing this, be careful to avoid contaminating yourself.

Sampling: Disease assessment activity within plots and fields.
Survey: To move over a specific place for some observation.
Surveillance: Repeated or sequential survey of some place/ locality for some observation to ascertain the changes /fluctuations in the objects of study.

A broad range of products and services are required by farmers in order to adopt Integrated Disease Management , calling for close interaction between them, the
scientists and the experts developing IDM technologies. IDM must be based on farmers’ concerns and circumstances.

Validation of IDM technologies is ultimate test for IDM knitted with available technologies under ground realities of the field. Since IDM is multidisciplinary, multiorganizational and multi-locational participatory approach, involvement of all the stakeholders, including farmers and field technicians is to be ensured. The following guidelines have been used as spirit behind the methodology of IDM validation.

The eventual objective of promoting IDM is to empower its users to engage sustainable agricultural production with long term positive impacts on human being, poverty and environmental health.The impact of successful implementation of IDM approaches cannot be achieved if IDM is not strategically placed within national policies for agricultural production and protection. There are number of the national policies and related regulations that have direct impact on IDM adoption and scaling up in India.

India has successfully reduced pesticide consumption without adversely affecting the agricultural productivity. This was facilitated by appropriate policies that discouraged pesticide use and favored IDM application. Despite it, adoption of IDM is low owing to a number of socio –economic, institutional and policy issues. 

• Pathogen attacks the crop at all stages of crop growth.
• Symptoms appear on leaves, nodes, rachis, and glumes. On the leaves, the lesions appear as small bluish green flecks, which enlarge under moist weather to       form the characteristic spindle shaped spots with grey centre and dark brown margin (Leaf blast).

Taxonomy is the science of identifying (discovering), describing, naming and classifying organisms. It is a complex summing up of knowledge starting with thorough analysis to base the synthesis that will end up in the name of a taxon. Correct identification of biological taxa is a necessary pre-requisite to all other enquiries about the biological world.

Brinjal (Solanum melongena Linn.) is one of the widely used vegetable crops and is popular in many countries viz. Central, South and South-East Asia, some part of Africa and Central America (Gurubban, 1977). It is also known as the aubergine, eggplant, melongene, guinea squash etc. Various data indicate that from the several species that evolved in Africa, one (Solanum incanum), gave rise to a distinct species which spread to South-East Asia as the wild ancestor of Solanum melongena (Lester, 1998).

‘Cucurbits’ is a term coined by Liberty Hyde Bailey for cultivated species of the family Cucurbitacae (Robinson and Decker-Walters, 2004). Presently, the term has been used not only for cultivated forms, but also for any species of the family Cucurbitacae. Among vegetables, the cucurbits form one of the largest groups with their wide adaptation from arid climates to the humid tropics.

Potato is one of the major non cereal food crops in the world and ranks fourth after rice, wheat and maize. Due to its high production potential per unit area and time, the crop has been recorded for sustaining millions of lives during the times of war and hunger. Native of South America, this crop was introduced into India in
early seventieth century. Currently India ranks 3rd for area and 2nd for production in the world [AICRP (Potato) Bulletin No. 2].

Okra (Abelmoschus esculentus Moench), otherwise known as Lady’s finger or Bhindi is an annual malvaceous plant and the sixth important vegetable crop cultivated throughout the country mostly in kharif and summer seasons. Though it is reported to be originated from tropical and sub-tropical Africa, but it has gained much importance in India as the secondary centre of origin. India ranked first in okra production in the World and major okra producing Indian states are Uttar Pradesh, Bihar, Orissa, West Bengal, Andhra Pradesh, Karnataka and Assam (Anonymous, 2011).

Tomato, Lycopersicon esculentum Mill. is an important vegetable cultivated throughout the world; both outdoors and under protected structures for fresh market consumption and processing. In India this nutritive rich vegetable is grown over an area of 0.60 m ha with an estimated production of 11.9 mt. Productivity of tomato in India is lower (18.6 t/ha) than the world productivity (27 t/ha) (Anonymous 2009). Tomato is grown in a wide range of climatic conditions across states of Andhra Pradesh, Orissa, Karnataka, Maharashtra, West Bengal, Bihar, Gujarat, Uttar Pradesh and Chhattisgarh.

Members of the family Cruciferae commonly used as vegetable include Cabbage, Cauliflower, Broccoli, Brussels sprouts and mustard etc. The genus Brassica is known for its important agricultural and horticultural crops. A dislike for cabbage or broccoli can result from the fact that these plants contain a compound similar to
Phenyl thiocarbamide (PTC), which is bitter or tasteless to some people depending on their ‘taste buds’ (Theresa, 1995).

The green pepper or chilli is reported to be the native of tropical America (Thompson and Kelly, 1957). This was widely cultivated in Central and South America in early times and was unknown in Europe prior to the discovery of America. The chilli belongs to the family Solanaceae and genus Capsicum. Only four species are under cultivation, out of which the cultivation of the two, Capsicum pendulum and Capsicum pubescens, are restricted to South and Central America.