eChapters

ABSTRACT

Contour hedgerow technology has different names in different regions. Sloping Agriculture Land Technology (SALT) has alley farming with hedgerow barrier technology. It is basically an agroforestry system in which nitrogen - fixing trees or shrubs are planted very closely in rows and cash crops grown in between the alleys. The SALT has been considered as an alernative to shifting cultivation. Forest dwellers are mostly tribals and shifting cultivation have been their practice for food production. The slash and burn has caused enormous damage to the forest composition. The forests on the hills and on the mountains have suffered a lot due to “Podhu” cultivation. The similar situations have been observed also in most of the Asian country. The hilly area has been considered under the hedgerow system for soil and water conservation. The introduction of the agroforestry systems in the farmers fields and in the wastelands have brought potential forest farming. The young leaves of some hedge row plants provide good fodder for livestock. Hedgerows can also be managed to provide fuelwood, if necessary. The hedgerows and their trimming provide mechanical and biological barriers and help minimise soil erosion by reducing surface runoff velocities, leading to higher deposition of soil sediments and living source of nutrient cycling. The food and cash production has been observed to be the most essential components in four types of SALT models.

Chemical synthesis is spontaneous organization of molecules into stable, structurally well-defined aggregates at the nanometer length scale. Chemical synthesis is largely an art form (i.e., theory often does not quantitatively predict how to make new materials from molecules).Yet, chemical synthesis can be quite powerful (e.g., proteins and complex organic molecules can be made from simple reagents) Semiconductor nanocrystals have been synthesized via “natural self-assembly” in two steps:

1.Capped cluster molecule forms spontaneously from molecular reagents in solution

2.Cluster molecules crystallize out of solution

Nanoparticles synthesis is done by two major routes, which include classical synthesis and green synthesis. The green synthesis techniques generally utilize relatively non-toxic chemicals non-toxic solvents, biological extracts and systems. Biological methods are considered safe and ecologically sound forthe nanomaterial fabrication asan alternative to conventional physical and chemical methods

Nanoparticles

Gold, silver, and copper have been used mostly for the synthesis of stable dispersions of nanoparticles, which are useful in areas of photography, catalysis, biological labeling, photonics, optoelectronics and surface-enhanced Raman scattering (SERS) detection

The need for biosynthesis of nanoparticles rose as the physical and chemical processes were costly. So in the search of cheaper pathways for nanoparticle synthesis, scientists used microorganisms and then plant extracts for synthesis. Nature has devised various processes for the synthesis of nano- and micro- length scaled inorganic materials which have contributed tothedevelopment of relatively newandlargely unexplored area of research based on the biosynthesis of nanomaterials.

Infrared spectroscopy (IRspectroscopy) is the spectros copy that deals with the infrared region of the electromagnetic spectrum, that is light with a longer wavelength and lower frequency than visible light. It covers a range of techniques, mostly based on absorption spectroscopy. As with all spectroscopic techniques, it can be used to identifyand study chemicals. A common laboratory instrument that uses this technique is a Fourier transform infrared (FTIR) spectrometer.

The infrared portion of the electromagnetic spectrum is usually divided into three regions; the near-, mid- and far- infrared, named for their relation to the visible spectrum. The higher energy near-IR, approximately 14000–4000 cm^–1 (0.8–2.5 μm wavelength) can excite overtone orharmonic vibrations. Themid-infrared, approximately 4000– 400 cm^–1 (2.5–25 μm) may be used to study the fundamental vibrations and associated rotational-vibrational structure. The far-infrared, approximately 400–10 cm^–1 (25–1000 μm), lying adjacent to the microwave region, has low energy and may be used for rotational spectroscopy. The names and classifications of these sub regions are conventions, and are only loosely based on the relative molecular or electromagnetic properties.

Infrared spectroscopy exploits the fact that molecules absorb specific frequencies that are characteristic of their structure. These absorptions are resonant frequencies, i.e. the frequency of the absorbed radiation matches the frequency of the bond or group that vibrates. The energies are determined by the shape of the molecular potential energy surfaces, the masses of the atoms, and the associated vibronic coupling.

Common Poultry Diseases

Infectious diseases

Bacteria

Commonly known as “germs”, bacteria are very small living microorganisms. Only a few bacteria cause diseases. In birds these include Salmonella, Clostridia, Pasteurella, Vibrio, Staphylococci, Streptococci, Mycoplasma, Hemophilus, and Mycobacterium etc.

INTRODUCTION

Research in agriculture and allied activities and the subsequent technological innovations are important requisites for enhanced productivity and generating income for the farmers. In India, farming is a way of livelihood to 65 per cent of nearly 1. 1 billion population. Our farm population is increasing annually by 1. 84 per cent. The average farm size is becoming smaller each year and the cost-riskreturn structure of farming is becoming adverse with the result that farmers are getting increasingly indebted. There is no option except to produce more food and other commodities under conditions of diminishing per capita arable land and irrigation water resource. Hence, we must harness the best in frontier technologies, thus integrate them with traditional wisdom and thereby launch an eco-technology movement.

The productivity in agricultural sectors is dependent on several bio physical and socio-economic factors. The significant biophysical factors are weather parameters, soil health, water resources, crops/ varieties and pest environments. In order to monitor the impact of weather parameters, we need to have weather forecasts and the accuracy of which to harvest the economic benefits should be given top priority. Only fifty years ago, weather forecasting was an art which was derived after interpretation of data received from land based observing stations, balloons and aircraft etc. Now, modern technology particularly computers / weather satellites / radars has resulted in enormous improvements in the accuracy of weather forecasting with the help of various coordinated meteorological observing networks.

2.1 Introduction

Weather has always been a popular topic but in the recent past it has received wide attention and debate as the public concern has increased about unforeseen changes in our climate. Over the 20^th century the average temperature of the earth has increased by 0.4 -0.8^oC. This increase is expected to continue and by 2100 the average global temperature is likely to be 1.4 - 5.8 ^oC warmer. One of the anticipated effects of climate change is the possible increase in both frequency and intensity of extreme weather events, such as heat waves, cold waves, hurricanes, floods and drought spells. The warming of the earth may fuel interactions between the ocean and atmosphere that will amplify the frequency and intensity extreme weather events. The possible changes in the frequency, distribution and intensity of extreme climate events have a significant influence at local, regional and global scales due to their multi-sectoral impacts on the overall economy.

4.1 Introduction

Circumstantial evidences almost confirm researchers’ on early predictions of a changing climate and a warming world. The trend of changes also establishes the primary influence of increased greenhouse gas concentration on the global warming and the consequential events. The global mean surface air temperature has increased by about 0.74°C over the last 100 years. It is projected to rise 1.4 to 6.4 °C by the year 2100 (IPCC AR4, 2007). Changes will vary from region to region. Eleven of the twelve years in the period 1995-2006 rank among the top 12 warmest years in the instrumental record (since 1880). The radiative forcing of CO₂, CH₄ and N₂O is very likely (> 90% probability) increasing at a faster rate during the current era than any other time in the last 10,000 years. This is because of the increase in the global abundance of the three key greenhouse gases. The atmospheric CO₂ concentration has reached the level of 389 ppm in 2010 (WMO, 2011) from 270 ppm the pre-industrial era. In addition, global abundance of other greenhouse gases such as methane (CH₄) has increased from 700 ppb in the pre-industrial era to 1808 ppb in 2010 and in the same period, nitrous oxide (N₂O) has increased from 270 ppb to 323 ppb.

Introduction

On 26^th December 2004, the Indian coastline experienced the most devastating tsunami in recorded history. The tsunami was triggered by an earthquake of magnitude Mw 9.3 at 3.316ºN, 95.854°E off the coast of Sumatra in the Indonesian Archipelago at 06:29 hrs making it the most powerful in the world in the last 40 years. In recent years increasing the vulnerability to natural disasters of developing countries is a major reason for concern. The potential loss of human lives and property due to natural hazards is very high in the urban areas of these countries. The Information obtained from conventional tsunami hazard maps does not always provide sufficient data for users .needs. The difficulty in presenting more significant information on tsunami hazard maps in conventional paper format is due to the limited available physical space of that format. Printing more information on such paper maps tends to confuse rather than provide more needed information to users. Furthermore, these kinds of maps provide little opportunity for users to ask for additional information, to determine the relationships between different kinds of information and important quantitative analyses. Furthermore, Tsunami hazards have important temporal attributes. Presenting these attributes on the map; e.g. the sequence of volcanic eruptions in a region or the frequency of tsumani in a particular area during a particular period of time is very difficult.

Introduction

Low and erratic precipitation, diurnal fluctuations in temperature and low humidity are the typical characteristics of deserts and their margins. Further, strong winds, sunny and very bright days and unpredictable periods of drought and famines are regular features. These lands are poor in fertility. Uninterrupted increase in human and animal pressures is violating carrying capacity of the natural resources, thus resultant is desertification.

Arid zones are described as a part of the drylands, and have the most severe edapho-climatic conditions. The major distinguishing feature for defining and for planning for the arid zone is the low rainfall (below 500 mm or Aridity Index <0.20) with more than 50% inter-annual variability. This makes a great difference in terms of the nature of the ecosystem, the socio-economic environment and the challenges for sustainability. High wind and solar regimes further increase the effect of rainfall variability and the whole complex makes a fragile ecosystem in which small disturbances may cause great loss to the sustainability, which are sometimes irreversible (Hou’erou, 1996). The hot arid zones of the world are economically and environmentally disadvantaged, with unique problems. The ecosystems of these zones are highly fragile with large risks that cause severe impediments to development programs. Of the total land area in the world, arid zones cover 18.8% and the hyper-arid zones account for 22.3% of the total arid zones (FAO, 1989).

Introduction

Desertification is now accepted as a major environmental issue because of the fact that 69.5 percent area of the world’s dry lands and more than 1.2 billion people in over 110 countries living in this habitat are affected by various land degradation processes. During last 20 years, researchers have focused their discussion either on a condition or a cause or a set of processes to assess different paradigms of desertification. Several studies carried out in arid western part of Rajasthan (Singh et al., 1992, Kar, A. 1993b, Kar, 1995, Dregne, H.E. 2000, Kar et al.2007) show that wind erosion is still a major problem. Though, there are many instances of location specific problems like water erosion, salinity/ alkalinity and water logging, about 75% area in arid western Rajasthan is affected by wind erosion hazard of different intensities (SAC, 2007, Kar et al. 2009). Decreasing rainfall gradient from east to west and increasing wind strength in that direction are responsible for the spatial variability in sand reactivation pattern. Water erosion in the form of sheet, rill and gully erosion is a major problem in areas, where average annual rainfall exceeds 350 mm, the rainfall intensity is high and the topographic and soil characteristics favour high run-off. Destruction of vegetation cover and excessive ploughing of shallow soils, especially on the sloping lands, accelerate the problem.

Introduction

Drylands account for over 40% of the global land surface, or approximately 5.2 billion hectares (de Sherbinin, 2002). They provide home for more than 2 billion people or nearly 40% of the population of the world (White and Nackoney, 2003). Asia alone accounts for about 32% of the World’s drylands. Broadly defined by their modest water supply drylands have many regional names, such as semideserts, grasslands, savannas, steppes, and pampas. Dryland ecosystems are a vital part of the earth’s human and physical environments and play a major role in global biophysical processes. They provide much of the world’s grain and livestock, forming the habitat that supports many vegetable species, fruit trees and micro-organisms. With an exception of Australia and the United States, almost all drylands are situated in developing countries with populations living in extreme poverty. Populations of drylands are frequently some of the poorest in the world. Food security and water availability of these areas has always been unstable due to high variability in both rainfall amounts and intensities and the occurrence of prolonged periods of drought. The increasing pressures caused by the global climate change and massive land-use changes further increase human vulnerability in dry regions. The impacts of climate change in drylands are likely to lead to still larger populations being affected by water scarcity and the risk of declining food security and increase the risk of environmental migrations and violent conflicts caused by the decline of resources, which are important to sustain livelihoods (Barnett and Adger, 2007).

Abstract

This paper is the synthesis of researches of quaternary on the Chad lake basin, our field investigations, our previous palaeogeographic research underlined by the sédimentological analyses, ¹⁴C radiocarbon and thermoluninescence dating. The objective is to show that after the effects of geological fluctuation, paleoclimatic oscillations, the Chad lake basin experiences since historical times an increasingly drying up due to the combination of geographic factors such as its close position in the Sahara desert, centre of the climate dynamics and human activities. This situation frequently generates recurrent live conditions to which man has to face.

Introduction

Thar Desert is unique both from floristic and climatic parameters. Biodiversity in this region survives on a very/ fragile ecosysytem under a highly hostile environment. Major area consists of dry undulating mass of loose sand, thus, leading to shifting sand dunes. The sandy plain is full of sand-hills with serve as low depressions where salt and soda are deposited after drying. The whole area is inhospitable and sterile. Trees are rather a few and far between (Bhandari, 2005).

The Thar Desert of western India is known for its rich and ancient culture system and traditions. The communities have long been part of the Thar Desert ecosystem and have evolved specific strategies to live in harmony with its hostile environment. Orans have remained mainstay in balancing this arid ecosystem. Man of this region has never been greedy as he is today. Orans were repositories of ancient system of gene pool conservation. But, there are unregulated encroachment on the marginal lands and over-exploitation of groundwater resources. Orans has been part and parcel of the lifestyle of the Thar Desert inhabitants. Orans are used to provide vital grazing land for livestock, water, minor forest produce, medicinal plants and green cover for the villages. They were worshipped as devbhumi. Orans preserve the endemic, endangered or threatened species, medicinal plants and wild variety of cultivars found.

Abstract

The Western Desert covers approximately 700,000 km², which is more than two-thirds of the total area of Egypt. This immense desert, to the west of the Nile, spans the area from the Mediterranean Sea to the Sudanese border. The Great Sand Sea lies within the desert’s plain and extends from Siwa Oasis to Jilf al Kabir plateau. Scarps and deep depressions exist in several parts of the Western Desert. Limited agricultural production, the presence of some natural resources, and permanent settlements are found in the western desert oases (Siwa, Bahariya, Farafra, Dakhla and Kharga), all of which have fresh groundwater. Siwa Oasis, close to the Libyan border, is isolated from the rest of Egypt but has sustained life since ancient times. The Siwa’s cliff-hung Temple of Amun was renowned for its oracles for more than 1,000 years. Herodotus and Alexander the Great visited the temple in the pre-Christian era. The Oasis is a natural depression about 23 meters below sea level. It covers an area of about 1050 km² (2,50,000 acres); of which only 87.95 km² (20,940 acres) are currently cultivated. The total numbers of inhabitants in Siwa were 21,482 in 2006. The main activity in Siwa oasis is agriculture which depends on the groundwater that outflows from about 1199 wells and springs giving a total annual discharge of about 255 million cubic meters from which, about 222 million cubic meters are lost due to evaporation and evapotranspiration, while the remainder goes to the natural lakes of Siwa Oasis. This has led to a continuous rise in the water table level and soil salinity.

Present research paper on land degradation processes relates to the improper management of water and land resources in Siwa Oasis, Egypt.

Introduction

Indian agriculture is in a phase of transition from subsistence to high-tech agribusiness. This has ushered in an era where entrepreneurship is viewed as a strategic intervention in rural development. As a result, promotion of rural enterprises has gained great significance as an instrument for improved farm earnings, employment and women empowerment. It implies development of agriculture through farm diversification, value addition and development of agro-processing industries that provides autonomy, independence and reduced need for social support to the farmers. Improved farm-industry linkages along with great export potential will be added advantages. In this development scenario, agriculture, specifically high value horticultural crops like fruits, vegetables, spices, flowers, plantation crops, medicinal and aromatic plants among others that ensure maximum returns to the growers with multiple scopes for value addition hold great promise. In fact, horticultural crops become a necessary condition for improving the living standards of farmers and ensuring nutritional security of the nation. The concept of nutritional security goes beyond food security to include adequate availability of micronutrients such as vitamins and minerals in addition to calorie and protein needs of the people supplied through food grains. Therefore, the spectacular increase in food grain production and a reasonable overall agricultural performance has failed to eradicate malnutrition as can be inferred from Table 1. It indicates that the Global Hunger Index (GHI), a more comprehensive tool used to measure and track hunger, ranks India (97 out of 118 developing countries) in the category of serious hunger behind Bangladesh (90/118). More disturbing are the rates of growing malnutrition among Indian households. As such, nutritional security becomes a more relevant indicator of food security as we move up the development ladder

Introduction

World’s population is continuously on the rise, triggering the demand for food. The Food and Agriculture Organization of the United Nations (FAO, 2011) observed that 70% increase in food production will be needed to sustain the globe’s population by 2050. Though, increase in agricultural production and productivity is said to be the panacea to solve food security issues, the greatest challenge that need to be addressed is the inefficiencies in the supply chain; instigated by insufficient storage capacities and perishability of food products. Food preservation and processing is highlighted in this context, as it serves to conserve/improve the quality and reduce food loss due to wastage as well as add nutritional security.

Introduction

Compared to the previous decades, the scope and power of intellectual property rights (IPRs) in agriculture and biotechnology has grown substantially and their international reach has expanded. The IP regime has set up the stage for healthy competition among research centres and industries for developing and seeking novel technologies. However, compared to developed countries, once the technology is created, not much attention is paid in the developing nations on their commercial, policy, environmental, ethical and societal implications. Hence, better techniques are needed for their management, to create policy and educate professionals to commercialize and govern them. Due to the critical role of technology in a competitive environment, strategic technology management is important for farmers and agri-enterprises too. The translation of nascent technologies into new products/ services and their commercialization requires some amount of hand-holding, mentoring and incubation support.

Executive summary

The enclosed project report envisages the setting up of a modern rice mill complex with attached parboiling facilities having an average processing capacity of 16 MT of paddy per day. The initial investment of the project is estimated to be Rs 480.17 lakhs. Sales Realization is assumed as constant for all the 7 years; amounted Rs 1129.2 lakhs. Pay Back Period for the project is estimated as somewhat more than 3 years. Internal Rate of Return for the project is 31%. Net Present Value is Rs.367.92 lakhs which is a positive value. It indicates that present value of cash inflows is greater than present value of cash outflows. Projected working results of the project throws light on its viability.

Science has individual, social, and institutional dimensions. Because of the social relevance of science, the dissemination of scientific information is crucial for its progress and contemporaneity. A scientist observes and then tries to make sense of that observation. She/he collects data, develops theories, uses hypothesis to understand and explain a thing, or a phenomenon, and then tries to find patterns emanating from her/his observations. Scientific knowledge keeps on changing.

Science is a blend of logic and imagination; therefore, there is always a possibility of disagreement and mismatch between them. A hypothesis is often untestable. Such untestable hypothesis are often rejected by the scientific community. “Science never pursues the illusory aim of making its answers final, or even probable. Its advance is, rather, towards the infinite yet attainable aim of ever discovering new, deeper, and more general problems, and of subjecting its ever tentative answers to ever renewed and ever more rigorous tests,” writes Karl Popper (1).

A scientist formulates, corrects, or discards the theories. The job of a scientist is to discriminate false idols from the real things. Science has built-in error correcting machinery, writes Carl Sagan (2). The error bars are insistent reminders to the fact that no knowledge is complete or perfect. It is used to exercise self-criticism. Each generation of scientists reduces the error bars a little. When we are self-indulgent and uncritical, when we confuse hopes with facts, we slide into pseudoscience and superstition. Sagan believed in maintaining an essential balance between the two attitudes: openness to new ideas, no matter how counter-intuitive they may be, and the most ruthlessly sceptical scrutiny of all ideas, old and new.

1 & 3 Assistant Professor, Dept. of Agricultural Extension and Rural Sociology, Agricultural College & Research Institute, Tamil Nadu Agricultural University, Madurai -625 104

2 & 4 Senior Research Fellows, Dept. of Agricultural Extension and Rural Sociology, AC & RI, Madurai -625 104.

Prelude

The rapid and unprecedented changes in the external environment such as liberalisation of the economy, globalisation of international markets, deregulation of the financial systems and implications of various clauses under WTO exerted considerable pressure on the agricultural system. Moreover, the major challenges facing the world today includes are: managing the environment in a sustainable manner, managing the exploding rate of population growth and urbanisation, ensuring food security, meeting health, education and literacy needs and eliminating poverty.

Meeting these challenges requires information, knowledge and participatory process of social change. Communication is an essential element in this process. According to Balit (1996) who pointed out that least expensive input for rural development is knowledge. Knowledge and information are basic ingredients of food security and are essential for facilitating rural development and bringing about social and economic change.

The 21^st century is witnessing a computer revolution in which information processing and retrieval are being reliably done at incredible speeds. Computers are used for storing, analysing and distributing information of all kinds including words, numbers, pictures, illustration, sounds and movies. Computer aided knowledge dissemination mechanism help to reach the unreached and foster new voices and new leaders.

According to Aasher (1995) microcomputer technologies have the potential to support all the major functions of agricultural extension, namely the technology generation, diffusion, adoption continuum and the efficient handling of descriptive, diagnostic, predictive and prescriptive types of information.

ABSTRACT

Dairy Development plays a vital role in bringing out significant changes in socio-economic structure of rural economy. The main objectives of Dairy Developments in India is to increase production and availability of milk through integrated policy of cattle cum Dairy Development, eliminating the middlemen, through formation of co-operatives and self supporting dairy enterprise. The advent of Geographical Information System (GIS) has added new vistas in the field of Dairy Farm and Management. It also helps in integrating the whole Dairy Farm in a more precise way to get correct information about the various factors related with the whole dairy farm.

Introduction

The farm of Sarasa Green Projects around Chapabandi, Bansgora and Hetedoba Mouzas near Durgapur in Burdwan District of West-Bengal. Dairy Development plays a vital roll in brining about significant changes in socio-economic structure of rural economy. The main objectives of Dairy development in West-Bengal is to increase production and availability of milk through integrated policy of cattle cum Dairy Development eliminating the middlemen through formation of co-operatives and self supporting dairy enterprise. (Fig.1)

Logical Framework Approach (LFA) is a framework for designing change process, monitoring progress and evaluating impact. It is a powerful tool for project design, management, assessment, follow up and evaluation of projects. In designing change process, monitoring progress and evaluating impact, ordering the change process in a logical sequence where inputs or resources identify as necessary means for performing activities are very important. Specific activities are then identified because they result in outputs which are necessary to achieve objectives. The two terms i.e.; log frame and logical framework approach are sometimes confused by many. The log frame is a document whereas the logical framework approach is a project design methodology. LFA originally developed by the American Defense Department and was first formally adopted as a planning tool for United State Agency for International Development (USAID) by the end of 1960’s and today it is being used, in one form or other and with different names, by major organisations in the field of development co-operation and private industry. Among these are British DFID, the OECD expert group on Aid Evaluation, ISNAR International Service for National Agricultural Research, Germany’s GTZ and the Inter-American Development Bank. It has also been widely adopted by NGOs, though not without reservations and concerns by some. In the 1990s it was often mandatory for aid organisations to use the LFA in their project proposals.

Introduction

The Andaman and Nicobar Islands popularly known as the Bay Islands are situated 1200 Km away from Indian mainland and are well known for their wide range of biodiversity.The dreaded tsunami hit the island on 26th December, 2004 and it destroyed livelihood of thousands of people. CARI on a limited scale initiated process of restoration of livelihood by technological interventions with generous funding by DBT under project entitled “Integrated Rehabilitation of tsunami affected people through technological intervention in the Andaman & Nicobar Islands” in the adopted villages of Manjeri, Manglutan and Guptapara. (Three situations). A total 56 ha has been affected by tsunami in the adopted villages. Following three situations occurred after tsunami and for each situation appropriate technological interventions were taken up.

Introduction

Cashew is an important horticultural crop. It has gained status of commercial crop from that of a forest component through technological advancements with respect to propagation, production and management. This has been possible as a result of increasing demand for raw cashew nuts and enhanced interest for its commercialization. The demand is mainly due to its good quality protein, unsaturated free fatty acids, rich blend of minerals and water-soluble vitamins, which altogether contribute an excellent dietary supplement. It is being cultivated by as many as 28 countries in Asia, Africa and Latin America

Introduction

Aquaculture has developed quickly over the last three decades to turn into important economic activity world wide. It has been attracting heavy investment due to the availability of sound technologies and limitless potential for export especially shrimp. There are several forecasts on demand for aquatic foods and it is expected that it will be 183 million tonnes by 2030. As the capture fishery production is stagnating at around 90 million tonnes, aquaculture is seen as the only alternative to bridge the widening gap in demand and supply. Globally, Landings from worldwide aquaculture has increased 10-15 % per year in the last two decades and this growth was due to the combined effects of scientific farming, availability of infrastructure facilities, changing consumer preferences and export market potential to developed countries.

Shrimp farming is relatively new and its introduction on a commercial scale can be traced to the early seventies. Despite the recent introduction, one third of the world shrimp production is from farmed shrimp. The shrimp producing countries are found in all regions based on FAO statistics including Europe and Middle East. The major to five shrimp producing countries are China, Thailand, Vietnam, Indonesia, and India. The future increase in world aquaculture production will be driven by China with South Africa, Latin America, the Caribbean and the Europe providing small increases.

Introduction

Aquarium fish keeping has become increasingly popular in industrialized countries and has been rated as the second biggest hobby and the most popular type of pet (Oliver, 2001). The National Pet Owners Survey 2007-08 revealed that 142 million freshwater and 9.6 million salt water fish were kept as pet in the USA alone (APPMA, 2008). The growing interest in aquarium fish has resulted in steady increase in aquarium fish trade globally. Today, with a turn over of US $ 9.0 billion a year and an annual growth of 8.0%, production of ornamental fish is an important business activity as well as one of the most popular hobbies in the world (Yanar et al., 2008).

INTRODUCTION

Irises are among the easiest of perennials to grow, providing an abundance of beauty with minimum care. Iris means ‘rainbow’ because they come in various colours. These are herbs with sword like leaves and roots are generally rhizomatous, although in a few species they are bulbous. The majority of garden irises are hybrid, often complex ones, whose parentage is obscene. Bulbous irises are more important in commercial horticulture, with over 50 cultivars, but dominated almost equally by two i.e. Ideal and Professor Blaauw which together account for over 70% of the area grown in the Netherlands. Regular irises make great cut flowers with their tall, sturdy stalks. Dwarf varieties are suited for flower beds and rock gardens.

Certain irises were at one time widely used in the manufacture of perfume, also has been widely used in folk medicine, mostly because of the fragrance of its dried roots which are used in the preparation of face powder and dentifrices. Commercially, the powder is known as Orris-root or Orris. The rhizomes of certain irises also have edible value.

Abstract

Seed technology deals with the various aspects of seed- right from production to make it readily and timely available to the end users. The advancement in seedtechnology was realizedlong back and itwas considered equally important to the development of new technology (varieties). Considering the importance of seed as well as variability among seed of different crop species or even in same crop species, the researchers initiated work and focused their direction of research accordingly which resultedinto worthy achievements. Brief overviews of the advancements made in seed technology are being discussed in this chapter. However, efforts are still on to get rid of problems of seed technology in order to strengthen the seed industry, which makes the highest contribution to rural development, probably among all industries.

Abstract

Water scarce state Rajasthan is without efficient and effective management. Water, when at surface is cheaper and like free commodity to use. Most of it gets evaporated rapidly due to aridity. There is no water during summers and drought years. This is now critical time to rethink and review our planning and policies and make it ground water oriented instead of completely surface water based. Ground water management should be the thrust area and key issue. There is need to conserve andharvest each drop ofwater especially for recharge to ground water. Utilize the augmented ground water resources as crisis management during long dry spells. Also, enforcement of regulatory measures, creating awareness among masses and participatory approach ofmanagement are the key factors for ensuring sustainable availability of water resources.

Abstract

Indian is rich biodiversity and availability of a variety plants of enhances the interest of scientist for the possible use of plant products as natural herbicides. The emphasis should be to collect the information about such plants from the concerned people who have traditional knowledge about the use of these herbs and then to study scientifically to arrive at conclusions. The study of compounds produced by a plant which inhibit or stimulate the germination and the development of other plants is important for understanding the mechanisms of the ecologicalinteraction. Therefore, there is continuing need to develop and release new phytotoxic chemicals that preserve the environment and enable a more efficient control of weeds, improving crop yield and quality. Ageratum conyzoides a herb traditionally used for treatment of many diseases, releases some potential allelochemicals and other chemicals to the environment which inhibit the germination and growth of neighboring plants. A complete study of its potential allelochemicals may be useful in biological control for sustainable agriculture.

Abstract

Bioinformatics is a field of science which studies biology, computer science, and information technology. The ultimate goal is to obtain useful information by data acquisition, analysis and interpretation of sequences data. In the current decade, a huge volume of sequence data is stored in the data bank due to global genome initiatives of many organisms. Management and understanding of the genome data cannot be possible without the bioinformatics tools. A large number of tools and softwares packages are available either commercial or freely online for the bioinformatics applications. The use of bioinformatics tools enhances the research capability for crop improvement through genome sequencing, database management, assembly, alignment, primer designing, markers development, genes prediction and annotation, gene expression, phylogenetics, protein structure identification, metabolic pathways analysis and many other applications.

1.    Irrotational flow is

(a) Incompressible fluid with shear

(b) Newtonian fluid

(c) Incompressible fluid with no shear

(d) Non-Newtonian fluid

2.    Irrotational flow is also called

(a) Potential flow

(b) Turbulent flow

(c) Laminar Flow

(d) None of these

3.    Bernoulli’s equation is based on the assumption that

(a) The flow is non-viscous, uniform and steady

(b) The flow is steady, non-viscous, incompressible and irrotational

(c) The flow is uniform and incompressible

(d) None of the above

India is emerging as a food power in the international trade of foods. The immense un-tapped potential in the food processing sector in India has to be still exploited. It has been termed as ‘sun rise industry’ for improving agricultural productivity and enhancing food availability. The terms food quality management and food safety have assumed large dimensions today. In the international trade of foods, specifications have been laid down on the levels of harmful substances (chemical or biological origin), protocols have been documented on their detection and quantification in foods. We have to meet these international standards to export processed food and earn foreign exchange. The future of Indian food processing sector is bright provided it improves the quality of its products as per international standards.

Food poisoning is an acute illness resulting from the ingestion of injurious agents such as chemical, heavy metals, parasites, microbial toxin, wild species of mushroom in food. Food poisoning is commonly caused by certain bacteria or their toxins, which are the poisonous proteins that these bacteria produce. Food borne pathogens are potential global problem, more than 90 per cent of the cases of food poisoning are caused by bacteria, Staphylococcus aureus, Salmonella spp, Clostridium perfringens, Campylobacter jejuni, Listeria monocytogenes, Vibrio parahaemolyticus, Shigella dysenteriae, Bacillus cereus and enteropathogenic E. coli. These bacteria are commonly found in many raw foods. Generally a large number of food poisoning bacteria must be present to cause illness. In most of these food poisonings, the food serves as a vehicle of transmission. The role of food here is significant, since the product not only may permit the survival of the pathogens, but also may provide a suitable medium for the rapid multiplication of microbes and production of toxin. A more serious aspect of microbial contamination is the possibility of serious health hazards due to potential pathogenic organisms gaining entry into foods due to low standards of hygiene and sanitation.

Food poisoning may be due to food intoxication or food infection. Food intoxication and food infection differ in many characteristics (Table 17.1). Food intoxication refers to food borne illness caused by the ingestion of a microbial toxin preformed in the ingested food (Botulism). The most serious food poisoning caused by toxins is botulism, an often fatal disease that results from eating improperly canned foods containing the bacteria Clostridium botulinum. Classically, food intoxication is caused by the growth of Clostridium botulinum, Staphylococcus aureus, Bacillus cereus in food. Clostridium botulinum produces a neurotoxin, while Staphylococcus aureus and Bacillus cereus cultures produce enterotoxins in food.

Size shape and Appearance of Bacterial cells

Bacteria vary significantly in their morphology, that is in their appearance. They range in size from 0.2 μm to1 μm in diameter and 1 μm to 10 μm in length. There are three basic shapes of cells :

1. Spherical

2. Rod-shaped

3. Spiral.

6.1 Introduction

Stratigraphy is the branch of geology which deals with the study of rock layers (strata) and layering (stratification) in their chronological order. It is primarily used in the study of sedimentary and layered volcanic rocks in order to interpret geological history and age. The term historical geology is also used as a synonym of stratigraphy but in a wider sense, it deals with the whole sequence of events that make up the history of the earth from its origin and age relations of rock strata, evolution through its life form, and structures. The scope of stratigraphy is very wide; it involves description and classification of layered sedimentary rocks and also of igneous & metamorphic rocks. The study involves correlation between different areas like lithological characters, fossil content, geophysical and geochemical properties including absolute radiometric dating.

6.2 Principles of Stratigraphy

Stratigraphy is based on the following few principles:

6.2.1 Law of superposition

In a sequence of horizontal sedimentary rock layers, the younger layers are on the top and the older layers are at the bottom. To put it another way, in a normal sequence, each bed is younger than the bed beneath it. Geologists today use it as the basis for a bed-by-bed analysis of geological history in a given area. This is important to stratigraphic dating, which assumes that an object cannot be older than the materials of which it is composed. This law known as "Law of Superposition" was first proposed by the scientist Nicolas Steno in the 17th century.

The goat milk has several peculiarities, being a food of high digestibility and high nutritional value.Goats can hardly compete with cattle or buffalo in milk production ability. Goats produce approximately 2% of the world’s total annual milk supply. Neverthless, goat is an important source of animal protein for the landless and marginal farmers of tropical countreis, in areas where other classes of livestook cannot possibly survive and for several classes of people allergic to cow milk. Goats contribute about 4 % of the total milk produced in India. Goats and sheep producing milk for people start with the beginnings of domestication. For thousands of years they have provided sustainance for the people. During the last 150 years genetic selection and better feeding conditions led to several superior goat and sheep breeds in some countries in terms of milk and solids productivity, proving a great potential for evolution in both species, and responding to an increasing market demand and popularity. Some sheep breeds can produce more than 1000 kg milk in one lactation and several goat breeds more than 2000 kg milk, but in physiologically comparable terms of 4% fat-corrected milk both species can be equal. Goat milk production leaders have been capable of producing 10 kg milk per day of lactation.

Goat has been referred to as the Poor mans cow or wet nurse in Europe. Goat provides the cheapest source of milk to the poor both in rural and urban areas. The milk of goats is sweet, nourishing and medicinal. Goat milk is white in colour. Goat milk is whiter than whole cow milk. Butter and cheese made from goat milk are also white, but may be colored during processing. Exploitation of goats as a source of milk for human beings dates back from antiquity. Goat milk has been acknowledged as an ideal food for the aged, the sick and convalescent as well as for infants and growing children. Ever since Cleopatra filled her bathtub with goat milk , fresh goat’s milk has been revered for its superior moisturizing properties.

A disease is any process which disrupts an animals’s normal function. Occurrence of diseases causes heavy economic loss in terms of livestock health and production. Presence and accumulation of infectious agents in the environment lead to reduction in quality and quantity of animal products. Strategic control and eradication of economically important diseases will result in enhancing goat production in the country. Goat suffer from many diseases although the susceptibility of goats to diseases is less as compared to sheep or cattle. Goat diseases can be bacterial, viral or parasitic. Viral diseases are more common in herds and are responsible for large scale mortality at one time. With a good hygiene in the barn and if the goats are kept in a way appropriate to their species, most of the diseases can be avoided.

Much attention has not been paid for prevention and control of goat diseases since most of the goats are reared by poor people and prevention and control is generally considered uneconomical. However, this is not true, as small investment in disease prevention and control can bring enormous gains in goat productivity. Simple preventive measures like deworming and vaccination alone can save the herds from heavy mortality and can increase production considerably. Serious and early efforts on diagnosis and prevention of goat diseases are essential in order to improve the health and production. A wide range of bacterial, viral, parasitic infections, causing heavy mortality and morbidity result in huge economic loss to different goat farming systems. Metabolic and nutritional disorders in goats also affect their production performance. Metabolic disorders are of great importance in pregnant goats, especially those carrying multiple foetuses. Deficiencies of essential minerals, metabolites and amino acids below the critical level also adversely affect the production. Therefore, it is necessary to avert these imbalances (calcium, magnesium, Co, Cu, Zinc, Iodine) in the ration. Provision for extra energy and protein in late pregnancy are necessary to avoid parturient paresis due to low blood sugar and high ketones and hepatic insufficiency of glycogen. Soil- plant- animal interactions in relation to the incidence of chronic deficiency diseases of goats are often being observed.

Important by product from Rabbit are meat, wool, planner and skin. It can be made highly profitable if products are properly processed and marketed. Many rabbit products are wasted because people do not have enough knowledge about their processing. Rabbit farming is profitable preservation of its by-product.

Slaughtering: Know when and how.

Slaining: Familiar with how to remove skin and carcass preparation and processing. How the skin has to be processed into a product from the skin obtained.

Manure: Know how to collect and preserve it.

Functional Genomics

• Expressed genes can be identified in a cDNA library
• A microarray can identify genes that are transcribed
• The coordinate regulation of many genes is revealed by a DNA microarray analysis

Proteomics

The proteome is much larger than the genome

2D gel electrophoresis is used to separate a mixture of cellular proteins

Mass spectrometry is used to identify proteins

Protein microarrays can be used to study protein expression and function

Invertebrate Development

The early stages of embryonic development determine the pattern of structures in the adult organism

The study of Drosophila mutants with disrupted development patterns has identified genes that control development

The generation of a body pattern depends on the positional information that each cell receives during development

The gene products of maternal effect genes are deposited asymmetrically into the oocyte and establish the anteroposterior and dorsoventral axes at a very early stage of development

Gap, pair-rule, and segment-polarity genes act sequentially to divide the Drosophila embryo into segments

The expression of homeotic genes controls the phenotypic characteristics of segments

The developmental fate of each cell in the nematode Caenorhabditis elegans is known

Heterochronic mutations disrupt the timing of developmental changes in C. elegans

1. In bhendi field, the permissible limits for wild bhendi for Foundation and certified seed production is

   a) 0.10, 1.00

   b) 0.05, 0.10

   c) 0.1, 1.5

   d) None

2. Weed seed, other crop seed and inert matter are the fractions of

   a) Purity analysis

   b) Germination

   c) Seed viability test

   d) All

1. ……….. is the study of human relationship in rural environment.

   a) Sociology

   b) Rural sociology

   c) Indian sociology

   d) None of the above

2. Journal of Extension is published from ………….

   a) UK

   b) USA

   c) Germany

   d) Holland

11.1 Planning

• Upon receipt of production program verify that crop sowing dates fall into crop windows identified for the particular area and allot accordingly. Check the quality of lots produced in previous season, if available.
• Assign crop location (Open field, Green house, Insect Proof Net / Cage etc) according to crop needs, site conditions and degree to which these conditions can be manipulated efficiently to meet the crop needs. Always adhere to optimum crop conditions.
• Identify material and personnel needs based on the production program and coordinate timely arrival of both. Material and personnel must meet standards established by the production site.
• Identify material quality like A, B, D (First, Second and Dirty) based on the specs.
• Refer standard procedures or formulate some of them. Do not proceed if proper documentation does not exist.
• Plan training for laborers regarding crossing, flower morphology, anthesis, time of stigma receptivity etc.

8.1. Documented ITKs on Moisture Conservation

The ITKs were documented under following specific categories

• Agronomic Measures
• Tillage
• Bunding & Terracing (Mech. & Vegetative barrier)
• Land Configuration
• Soil Amendment / Mulching
• Erosion Control & Runoff Diversion Structures
• Water Harvesting, Seepage Control & Ground Water Recharge

GENERAL CHARACTERS

• The members are terrestrial, and saprophytic or parasitic.
• The mycelium is well developed, branched and septate. The mycelium is of primary, secondary and tertiary type.
• Dolipore septum is present except rusts and smuts.
• Clamp connections present.
• Cell wall consists of chitin and glucans.
• Basidiomycetes reproduce asexually by conidia, arthrospores, oidia, fragmentation or budding.
• No specialized sex organs develop in Basidiomycetes.
• Plasmogamy takes place by somatogamy or spermatization.
• Sexual spores are basidiospores.
• They are exogenously produced on basidium.
• Usually four basidiospores are develop on basidium.
  The Basidiomycotina includes rusts, smuts, mushrooms, jelly fungi, puffballs, shelf fungi, toadstools, bird’s nest fungi, bracket fungi and earth stars.

INTRODUCTION

Plant pathogens can spread rapidly over great distances, vectored by water, wind, insects, and humans. Across large regions and many crop species, it is estimated that diseases typically reduce plant yields by 10% every year in more developed nations or agricultural systems, but yield loss to diseases often exceeds 20% in less developed settings, an estimated 15% of global crop production.

Disease control is reasonably successful for most crops. Disease control is achieved by use of plants that have been bred for good resistance to many diseases, and by plant cultivation approaches such as crop rotation, pathogen- free seed, appropriate planting date and plant density, control of field moisture and pesticide use. However, the most attractive form of control is provided by disease resistance, for as long as it remains effective, it provides protection at no cost to the farmers or the community. So plant resistance is a highly useful strategy that can be applied in the control of diseases. It does not require any special action from growers and constitute cheap and practical input in the integrated disease management system. The use of resistant varieties cannot only ensure protection against diseases but also save the time, energy and money spent on other measures of control. In addition to these advantages, resistant varieties, if evolved, can be the only practical method of control of such diseases as viruses, phytoplasmas wilts, and rusts etc. in which chemical control is very expensive and impractical. In crops of low cash value, chemical and other methods of control are often too expensive to be applied. In such crops development of varieties resistant to important diseases can be an acceptable recommendation for the farmer.

A

Acervulus (pl. Acervuli)—A saucer-shaped, spore-producing body of a fungus embedded in host tissue.

Actinomycetes—Filamentous bacteria that produce several antibiotics and give soil its earthy smell.

Active ingredient: In pesticides, the chemical responsible for the desired effect.

Aggressiveness: Virulent forms of pathogen cause differing degrees of symptom severity.

Alternate Host—One of two kinds of plants on which a parasitic fungus (e.g., rust) must develop to complete its life cycle.

Anamorph—Asexual stage of a fungus.

Antagonism: The counteraction between organisms or groups of organisms.

Economics definition

Adam smith (1776) defined economics as the science of wealth in his book An Inquiry into Nature and Causes of Wealth of Nations.

According to Marshall Economics is primarily a study of mankind in the ordinary business of life.

Agricultural Economics : An applied social science that deals with the production, distribution, and consumption of agricultural or farming goods and services.(or) an applied phase of social science of economics in which attention is given to all aspects of problems related to agriculture.

Subject matter of Economics : It can be studied through a) traditional approach and (b) modern approach.

a) Traditional Approach : Economics is studied under five major divisions namely consumption, production, exchange, distribution and public finance.

Consumption : The satisfaction of human wants through the use of goods and services is called consumption.

Production : Goods that satisfy human wants are viewed as "bundles of utility".

Exchange : Goods are produced not only for self-consumption, but also for sales. They are sold to buyers in markets. The process of buying and selling constitutes exchange.

Distribution : The production of any agricultural commodity requires four factors, viz., land, labour, capital and organization. The land owner gets rent, the labourer earns wage, the capitalist is given with interest and the entrepreneur is rewarded with profit. The process of determining rent, wage, interest and profit is called distribution.

Public finance : It studies how the government gets money and how it spends it.

b) Modern Approach : The study of economics is divided into: i) Micro-economics and ii) Macro-economics.