eChapters

India is contributing about 10% of the world’s vegetables, and in terms of production, the country stands second after China. The existing area under vegetable cultivation in India is around 6.89 million hectare with a production of about 96.54 million tonnes. There will be a demand of 151-193 million tonnes of vegetables in India by 2030 (Dhaliwal et al., 2006). There are extensive crop losses in vegetable crops due to increased insect infestations. Since vegetables are grown round the year, there is carry over of insect-pests across the seasons and also from sowing until harvesting. Vegetables also invite more pest problems because of their cultivation under high fertility conditions leading to high plant succulence. High yielding varieties and hybrids are further more prone to the attack of insect-pests. Insect infestation affects the quality and market value of vegetables adversely and it is estimated that 30-40% of the total production is lost due to the attack of pests (Lal et al., 2004). A large number of pesticides are being used repeatedly to manage the insect-pests in India. Indiscriminate use of pesticides has led to many problems like toxic residues in edible parts of the vegetables, adverse effects on non-target organisms and beneficial insects, resurgence of secondary pests and development of resistance in major pests to pesticides and also environmental pollution. Therefore, latest approach has been to minimize the use of highly toxic insecticides by integrating different strategies of pest control like use of biological control agents, pesticides of plant origin, insect resistant varieties and other cultural practices. In this chapter, efforts have been made to highlight the distribution, host range, identifying characters, biology and nature of damage of important insect-pests of vegetables and also the methods of their management crop or pest wise.

The importance of fruits and vegetables in human nutrition is well known. Vegetables are a rich and comparatively cheaper source of minerals and vitamins. Besides, their consumption in sufficient quantities provides taste and palatability, increases appetite and provides a fair amount of fibers. These are currently reckoned as an important adjunct for the maintenance of good health and beneficial in protecting against some degenerative diseases, thus, they form a vital part of human diet. Besides, vegetables now a day are being considered as an asset for providing a good source of income to the growers.

Vegetables originated in different parts of the world, some came from tropical or subtropical countries and others from temperate zones, some from humid areas and others from climates that are more arid. Most of the countries in the world are gifted with varied agro-climatic environments for growing an array of vegetable crops to combat the present imbalanced diet of a vast population of the world, particularly in the developing countries. Production of vegetables in developed countries is much higher, for instance in Japan, nearly 40% of the diet of the people is vegetables. To meet out the full dietary needs of the common man, to eliminate malnutrition, deficiency of minerals and vitamins and also to relieve the stress for increased production of cereals, there is a greater need for growing vegetables on larger scale. As such, for increased production of nearly 247 known vegetable crops, a sound knowledge of the various aspects of vegetable production technology, environmental stresses and constraints, techniques of raising, pre- and post-harvest technology, marketing and seed production techniques is of utmost importance. Breeding and selection of new cultivars have allowed for a greater adaptability to less favourable growing conditions than was possible in the past but the inherent agroclimatic requirements of a specific kind of vegetable have not changed materially. Time or season of planting of a particular vegetable crop is determined by its environmental requirement. Knowledge of specific agroclimatic conditions required for a particular crop could enable the grower to select the best season of planting in any particular area (Singh et al., 1991).

In addition to pathogenic diseases, numerous abiotic disorders may also arise during growth, development and post-harvest storage of solanaceous vegetables. The physiological disorders of vegetables that have been included in this chapter are directly or indirectly associated with genetic, cultural, nutritional, physiological and environmental factors, and in most of the cases, the definite cause of disorder is not well understood due to the association of numerous factors together. These disorders may be related to colour, shape and form/condition of the produce. The genesis of physiological maladies was earlier poorly understand due to complexity in their characteristic symptoms but at present is relatively more transparent. The characteristic symptoms of abiotic disorders discussed below have not been attributed solely to a single agent or to a single cultural or environmental factor. The environmental factors correlated with the incidence of these disorders include high light intensities and low or high temperature of that growing area. For many abiotic disorders, very limited research work has been done, and the causes are poorly understood both in terms of why cultivars differ in susceptibility and why certain environmental factors predispose the plants or parts of the plant to the disorder. The growers feel concerned with the incidence of abiotic disorders as these cause huge economic loss. Therefore, the control of these abiotic disorders is essential for profitable production of solanaceous vegetable crops. In this chapter, emphasis has been given on practical aspects of diagnosis and potential control measures.

Climate change and resource scarcity require farming systems that anticipate risks and make proactive decisions. This chapter explains how predictive modelling, artificial intelligence and IoT technologies can strengthen climate-smart agriculture. Statistical techniques, Convolutional Neural Networks, Long Short-Term Memory networks and Transformer models are examined for forecasting weather, crop performance and resource requirements. These tools can improve irrigation and fertilizer management, raise productivity and reduce environmental impact. Adoption remains constrained by poor-quality data, infrastructure deficiencies, cost, limited interpretability and unequal access to digital technology. Farmer-centred design, federated learning, gradual deployment and scalable systems are recommended for developing fair, practical and climate-resilient agricultural solutions.

Textile and apparel defects are commonly classified according to their severity, effect on product performance and influence on visual appearance. Accurate classification supports inspection decisions, corrective action and cost management. Critical defects create safety hazards, breach legal or compliance requirements, or make a garment unusable; affected products must be rejected immediately. Major defects significantly reduce appearance, durability or functionality and ordinarily require correction before sale, although they may not endanger the wearer. Minor defects are small departures from specifications that do not substantially affect usability but may lower perceived quality. Consistent classification enables inspectors to apply AQL criteria objectively and communicate appropriate acceptance, rejection or rework decisions.

Bio Control Agents explains how natural enemies can suppress agricultural pests and diseases through predators, parasitoids, and pathogens. It traces the historical development of biological control from traditional practices to major scientific successes and institutional development in India. The chapter describes introduction, augmentation, and conservation strategies, followed by detailed accounts of predators, parasitoids, and pathogenic microorganisms. Important bioagents, their characteristics, mechanisms, field applications, and mass-production methods are discussed, including Trichogramma, Chrysoperla, Cryptolaemus, Beauveria, Metarhizium, Trichoderma, Bacillus, and viral agents. The chapter provides a practical foundation for integrating biological control into environmentally responsible crop protection programs. across diverse farming environments and practical field implementation practically.

Agriculture occupies a significant place in the economy of India. It contributes nearly 20% to the Gross Domestic Product [GDP] and provides employment to around two-thirds of nation’s population Agricultural commodity exports account for nearly 20 per cent of the total export earnings of the country. The agricultural produce sector has been one of the most important components of Indian economy. Considerable progress has since been achieved in scaling new heights in the production of foodgrains, commercial crops like cotton, sugarcane, tea etc., fruits, vegetables and milk. The increasing trend of agricultural production has brought, in its wake, new challenges in terms of finding market for the marketed surplus. There is also pressure from all segments of agricultural economy to respond to the challenges and opportunities that the global markets offer in the liberalized trade regime. To benefit the farming community from the new global market access opportunities, the internal agricultural marketing system in the country also needs to be integrated and strengthened. In particular the market system has to be revitalized to a) provide incentives to farmer to produce more; b) convey the changing needs of the consumers to the producers to enable production r burning; c) foster true competition among the market players and d) to enhance the share of farmers in the ultimate price of his agricultural produce.

1.1. Introduction

A typical dairy farm consist of different classes of dairy animals like calf, heifer, breeding heifer, pregnant, milch and dry animals and bull. The systems of management for the different classes are not same. They need some routine as well as periodical farm practices, some of which are common for all categories of animals (i.e., identification, dehorning, grooming etc.), while some categories need special farm operations (e.g., castration in males, milking etc.). Also there is need of routine disinfection of animal sheds and farm premises to prevent and control occurrence of diseases and maintaining the animals healthy. Further for proper execution of all these operations there is need of keeping farm records.  Keeping in view the above points, this section deals with some important farm management practices.

INTRODUCTION

Radiation processing is a promising technology for improving hygiene and increasing storage and distribution life of food products. Ionizing radiation can be used to bring about beneficial changes in food stuffs (Urbain 1995) and it has been suggested as a method of ensuring safety of meat products (Patterson and Stevenson 1995). Ionizing radiation interacts with an irradiated material by transferring energy to electrons and ionizing molecules by creating positive and negativities (Moseley 1989).

1.1 Spice – definition and uses

Spice is defined as “a strongly flavoured or aromatic substance of vegetable origin, obtained from tropical plants, commonly used as a condiment”. A spice is a dried seed, fruit, root, rhizome, bark or vegetative substance or flower bud used in nutritionally insignificant quantities as a food additive for the purpose of flavoring. Spices are distinguished from herbs, which are leafy, green plant parts used for flavoring purposes. Herbs, such as basil or oregano, may be used fresh, and are commonly chopped into smaller pieces; spices, however, are dried and usually ground into a powder (http://www.reference.com/browse/wiki/Spice). American Spice Trade Association (ASTA) defines spices as “any dried plant product used primarily for seasoning purposes”. Included are tropical aromatics (pepper, cinnamon, cloves, etc.), leafy herbs (basil, oregano, marjoram, etc.), spice seeds (sesame, poppy, mustard, etc.) and dehydrated vegetables (onions, garlic, etc.) (http://www.astaspice.org/spice/frame_spice.htm). Many spices have other uses like food preservation, medicine, religious rituals, cosmetics, and perfumery or as vegetables.

Abstract

Complex industrial wastewater by using conventional treatment method is a significant challenge for its safe disposal. Recently, two step treatments by aerobic bacteria using activated sludge process followed by rhizofiltration has been recommended as a promising technology for detoxification of complex industrial waste. In activated sludge process recalcitrant compounds are biotransformed along with biodegradation of organic waste. Aerobic treatment may be activated sludge process, trickling filter or aerobic lagoon process, which one is used for treatment  it is based upon the characteristics of wastewater. Carbon and nitrogen ratio along with other organic compound is also play important role for microbial growth and degradation of pollutants. During degradation of various pollutants, metal microbes interaction play significant role for its bioremediation either through adsorption or bioaccumulation.

In agricultural systems, water quality is usually determined to  assess its suitability for irrigation and/or its use for aquaculture. Analysis of irrigation water is carried out, to know their nutrient load, suitability for irrigation purposes in general and to salt sensitive crops in particular, and their significance as nutrient suppliers as in practical crop production (Tandon,1993). For aquaculture, on the other hand, maintenance of pond environment for survival and growth of aquatic lives, forms the major purpose of such exercises. While both the assessments are mostly governed by some common variables, a few additional attributes are also used for identifying the water quality for these two different purposes. The most important characteristics, that determine the quality of irrigation water are:

Phenol is normally a benzene ring containing an –OH group, and hence an aromatic alcohol. The term “phenolic” refers to similar aromatic compounds with one or more -OH groups. Phenolics constitute one of the most widespread classes of secondary metabolites. Commonly talked about class of compounds like anthocyanins, flavonoids, lignins, tannins, coumarins and chalcones are all phenolic substances. Phenolics are water insoluble substances. However, the water solubility increases with the increase in the number of -OH groups. Phenolics absorb electromagnetic radiation strongly. Many of the phenolics absorb in the visible part of the spectrum (Ex. anthocyanins) and are coloured. Phenolics are produced in plants by 1. Shikimate pathway through phenylalanine (C₆-C3) and 2. Acetate/malonate pathway.

Abstract

In its natural environment, a plant faces various types of stressors. In fact, stress in moderation is a welcome event in plants. Only when it is in excess, would it compromise the productivity of plants. Beyond a threshold, stress (biotic and abiotic) has a detrimental effect on plant growth causing extensive yield losses in crop plants worldwide. Plants being sessile, have evolved a complex set of mechanisms to perceive the changes in the environment. Plants respond to minimize the potential damage due to stress while simultaneously preserving resources vital for their growth and development. The chapter presents an overview of various types of biotic and abiotic factors that act as plant stressors and the mechanisms by which plants respond to these stresses. The chapter concludes with a perspective on how the plant’s innate stress response machinery can be exploited for achieving higher tolerance to stress in crop plants.

Summary

The process of administration of a drug into the human body to cure a disease is regarded as drug delivery. The common routes of administration of the drugs include oral, nasal, inhalational, transdermal, dermal, ocular, rectal and vaginal. In the current chapter, an attempt has been made to discuss about the various methodologies which are being used to deliver the drug to the human patients.

Summary

Substance that acts as a catalyst in living organisms, regulating the rate at which life’s chemical reactions proceed without being altered in the process. Enzymes reduce the activation energy needed to start these reactions, without them, most such reactions would not take place at a useful rate. Because enzymes are not consumed, only tiny amounts of them are needed. Enzymes catalyze all aspects of cell metabolism, including the digestion of food, in which large nutrient molecules (including proteins, carbohydrates, and fats) are broken down into smaller molecules; the conservation and transformation of chemical energy and the construction of cellular materials and components. Almost all enzymes are proteins; many depend on a nonprotein cofactor, either a loosely associated organic compound (e.g., a vitamin) or a tightly bound metal ion (e.g., iron, zinc) or organic (often metal-containing) group.

Duff and  Daly (2002) briefly describes the commonly found orchid diseases. These include the Bacterial soft rot caused by Erwinia carotovora, black leg or slow decline caused by Fusarium spp., petal blight caused by Curvularia eragrostidis [PseudocochlioBolus eragrostidis] and Alternaria alternata, top rot/shoot rot caused by Phytophthora parasitica, and stem rot caused by Sclerotium rolfsii [Athelia rolfsii].

16.1 What is Sustainable Development?

Sustainable development (SD) is a pattern of resource use that aims to meet human needs while preserving the environment so that these needs can be met not only in the present, but also for generations to come (sometimes taught as ELF-Environment, Local people, Future). The term was first  coined by the Brundtland Commission and defined sustainable development as “development that meets the needs of the present without compromising the ability of future generations to meet their own needs” (UN, 1987; Smith and Rees, 1998)

Abstract

Biosurfactants (BS) are amphiphilic compounds produced by microorganisms mainly bacteria and are known to contain hydrophobic and hydrophilic moieties that play a major role in reducing surface tension (ST) and interfacial tensions between individual molecules. Chemically, BS is a complex molecules consisting of lipopeptides, glycolipids, polysaccharide protein complex, fatty acids and phospholipids. They are known for their biodegradability, low toxicity, and renewable nature.

The Coconut palm, also known as the Cocos Nucifera L., is one of the most fascinating and beautiful palms in the world. Epigraphical, literary and sculptural evidence provide proof that coconut has served humanity for more than three millennia. The palm is looked upon with reverence and affection and is referred to by such eulogistic epithets as “Kalpavriksha”, tree of heaven, the tree of abundance, nature’s super market, king of palms and the tree of life. The coconut is believed to have originated in Southeast Asia (Indonesia, Malaysia, Philippines) or Micronesia (Harries, 1977; Purseglove, 1968 and 1972). Coconut has been cultivated in India since ages and plays an important role in social, economic and cultural activities of the people. The palm is amenable to both plantation and homestead management and it can be either a major crop or a minor one in a homestead garden of mixed crops. While responding favourably to scientific management, the palm also tolerates negligent farming to a certain extent. Thus, it can adapt to the divergent farming situations and management practices that are prevalent in different agro-climatic regions. The coconut palm is usually found near the sea on sandy beaches where it can tolerate salt spray and brackish soils. It is also grown under different soil types such as loamy, laterite, coastal sandy, alluvial, clayey and reclaimed soils of the marshy low lands. The ideal soil conditions for better growth and performance of the palm are proper drainage, good water-holding capacity, and presence of water table within three metres and absence of rock or any hard substratum within two meters of the surface. The coconut palm can also grow well inland, within altitudinal limit of 600 m to 1752 m in the Tropics. It requires an equatorial climate with high humidity. A year-round warm and humid climate favours the growth of coconut. The ideal mean annual temperature, which can be tolerated by coconut palm, is around 27ºC with 5–7ºC diurnal variation. The palm does not withstand prolonged spells of extreme weather/climate variations under rainfed conditions. A well-distributed rainfall of 1300–2300 mm per annum is preferred. It is known as a coastal tree since it is grown along the Coasts and Islands and does not tolerate high temperature range, that is the difference between the maximum and minimum temperatures.

Introduction

Spice – definition and uses

SPICES are aromatic or pungent vegetable substances, used as whole, broken, or ground form, whose function in food is seasoning rather than nutrition and commonly used as a condiment. It may be a dried seed, fruit, root, rhizome, bark or vegetative substance or flower bud. American Spice Trade Association (ASTA) defines spices as “any dried plant product used primarily for seasoning purposes”. Included are tropical aromatics (pepper, cinnamon, cloves, etc.), leafy herbs (basil, oregano, marjoram, etc.), spice seeds (sesame, poppy, mustard, etc.) and dehydrated vegetables (onions, garlic, etc.). Many spices have other uses like food preservation, medicine, religious rituals, cosmetics, and perfumery or as vegetables.

The vision 2020 document of the Department of Agriculture and Co-operation envisages that “the tools of ICT will provide networking of Agriculture Sector not only in the country but also globally and the Centre and State Government Departments will have reservoir of databases” and also “bring farmers, researchers, scientists and administrators together by establishing ”Agriculture Online” through exchange of ideas and information”. To get realize the vision 2020 a large number of agriculture based websites and web portals have been established in India which is working for wellbeing of farming community. Majority of agricultural websites and web portals are providing need based technological information to the farmers as well as extension professionals. To revitalize our extension system these web based services can be used as ICT tool by extension personnel and farmers also. Therefore, to get access services from these websites and web portals or to replicate these ideologies in other part of country, elementary knowledge of working process and services available on these websites & web portals is essential. This chapter will provide a brief description about major ICT based projects dedicated to Indian farmers.

T    :    Thymine

T    :    TH1 cells are a subset of CD4 T cells that are characterized by the cytokines they produce. They are mainly involved in activating macrophages, and are sometimes called inflammatory CD4 T cells. OR TH2 cells are a subset of CD4 T cells that are characterized by the cytokines they produce. They are mainly involved in stimulating B cells to produce antibody, and are often called helper CD4 T cells. OR The term TH3 cell has been used to describe unique cells that produce mainly transforming growth factor-â in response to antigen; they develop predominantly in the mucosal immune response to antigens that are presented orally. OR See regulatory T cells.

The potential yield levels in major crops have reached almost to a plateau. The current world population of 7 billion is likely to reach 9 billion by 2050 putting huge pressure to produce more from the available arable lands as acreage of major crops is predicted not to increase any further. The deficit of food requirements will have to be met partly by bridging the gap between farm yield (the average yield of the crop in a particular region/country/world) and the potential yield (the yield obtained usually in the breeders’ plots grown across the region of interest with the best yielding new varieties and without biotic stresses as diseases and pests, and abiotic stresses such as drought, flooding, salinity, heat and cold and partly by increasing potential yield per se.

Carbohydrates are synthesized from CO₂ and H₂O in chlorophyll containing plants during photosynthesis. The term carbohydrate was originally coined for this class of compounds as most of them were hydrates of carbon or could be represented by the general formula C_n(H₂O)n. Not all the carbohydrates however, have this empirical formula, for example deoxyribose (C₅H₁₀O₄) and glucosamine (C₆H₁₃O₅N). Further lactic acid (C₃H₆O₃) formaldehyde (HCHO or CH₂O) and acetic acid (CH₃­.COOH or C₂H₄O₂) with this general formula is not a carbohydrate. Carbohydrates are defined as the compounds having either an aldehyde or a ketone group or a modified aldehyde or ketone group and other carbon atoms with alcoholic (-OH) group. Hence the continued usage of the term carbohydrate is for convenience rather than exactness.

Abstract

Contamination of environment with heavy metals has become a serious global problem due to its threat to animal and human health. Removal of this non-biodegradable, hazardous heavy metals through bio-materials has received paramount interest and intense attention in the last few decades as bio-materials play crucial role in remediating heavy metal polluted environment through a process called “biosorption”. The term biosorption, therefore, has become a popular theme in recent years due to its relatively simple, inexpensive, eco-friendly with rapid mechanism of removing heavy metals from polluted environment. There have been burgeoning studies around the globe for alleviating the problem of heavy metal pollution by selecting and developing an effective bio-sorbent with minimum treatment process for field application. This review aims to provide vast information on types of biosorbent available, their exploitation for better efficiency and their economic attractiveness for the restoration of heavy metal polluted environment.

Abstract

Now a days, the public has become more sensitive towards the protection of the environment and general awareness has increased about the adverse effects of industrial effluents contaminate with various pollutants, including dyes on the environment. Dyes are an important class of synthetic organic compounds used in many industries, especially textiles. Consequently, they have become common industrial environmental pollutants during their synthesis and later during fiber dyeing. Textile industries are facing a challenge in the field of quality and productivity due to the globalization of the world market. The dyes, which are widely used in textile industries when left in water bodies without any treatment cause environmental pollution and in turn are toxic, carcinogenic and mutagenic. The efficient treatment of the sludge from the industries is not economical and a challenging task. Currently, a number of different technologies and methods such as biological, physical and chemical are widely used for the removal of dyes. The treatment technologies for the removal of textile dyes from the textile wastewater found that over the past two decades interestingly focused on biodegradation methods such as microbial decolourization, enzymatic decolourization, adsorption by microbial biomass (living or dead) and bioremediation systems as a better alternative as the available physico-chemical methods.

Abstract

Photosynthetic blooms of toxin producing marine algae are often referred to as “red tides”. Proliferations of freshwater toxin-producing cyanobacteria are simply called “cyanobacterial blooms” or “toxic algal blooms.” Biotoxins of cyanobacteria are water-soluble and heat stable and they are released upon aging or lysis of the cells. The primary types of cyanobacterial biotoxins involves three types of toxins: hepatotoxins (microcystin; cylindrospermopsin and nodularin), which are taken up by the liver and cause weakness and anorexia (loss of appetite); neurotoxins (usually anatoxin and saxitoxin), which effect the nervous system and dermatotoxins (aplysiatoxin and lyngbyatoxin, LPS), which cause skin and mucous irritations upon contact. Unlike freshwater toxic algal blooms, marine algal toxins become a problem primarily because they may concentrate in shellfish and fish that are subsequently eaten by humans, causing syndromes known as paralytic shellfish poisoning/PSP (paralysis due to saxitoxin and gonyaulatoxins), diarrhetic shellfish poisoning/DSP (diarrhea due to okadaic acid) , amnesic shellfish poisoning /ASP(memory disturbances due to domoic acid), neurotoxic shellfish poisoning/NSP (paresthesia due to brevetoxin; also bronchial spasms). Coral reef fishes are the vectors of another algal poisoning, the ciguatera fish poisoning/CFP (paresthesia, warm-cold sense inversion etc., due to ciguatoxins and maitotoxin).

Citrus is the world’s leading tree fruit crop, comprising of mandarins, sweet oranges, grape fruit, limes and lemons. It is one of the most important fruit crops grown under varying agroclimatic conditions in India except in the high hilly temperature regions. Mandarin orange (Citrus reticulata) is the most important commercial citrus in India followed by sweet oranges and acid limes. Citrus fruits are not only delicious and refreshing but also they provide vitamins, minerals and other substances. Different species of Citrus have different chemical composition. In sweet oranges, principal constituents of edible portions are sugars (glucose + sucrose) and acids (primarily citric acid and a little of malic acid), the fruits of acid groups contain primarily acids in fruit juice. Rind of citrus fruits is rich in pectin and contains essential oils and glucosides (hesperidin, naringin). Citrus fruits are a good source of vitamin C (ascorbic acid - 25 to 85 mg/100 ml juice), besides vitamin B, A and D. World-wide demand of orange is as fresh fruits, but orange marmalade is an important product and is one of the main uses of sour and sweet oranges. Grape fruit and mandarins are also taken as fresh fruits. Citrus fruit can be utilized in a number of other ways as salads, juices, squashes, cocktails, syrup, concentrates and pickles. Peel of thick-rinded fruits can also be made to delicious candy. Lemon is used in many culinary purposes. Grape fruit is utilized in preparation of wines and brandies and also for flavour and in perfumery.

1.1 Introduction

Agriculture and allied sector contributes nearly 18 percent of gross domestic product in Indian economy and more than 70 percent population is dependent on agriculture and allied sector. In this sector, livestock is an integral part and it provides essential commodities and livelihood to the majority of its population. Livestock sector provides sustainability and stability to the national economy by contributing farm energy and food security. During last decade, the annual growth rate for livestock population maintained and in contrast the crop production remained stagnant or increased marginally. Between 1983 and 1999, the per capita consumption of milk increased by 37 percent and meat, egg and fish by 24 percent.

Introduction

It is an established fact that water in terms of direct deficit (drought) as well as water surfeits (flooding and water logging) and poor irrigation water quality (salinity)- are major constraints on the use of solar energy for food, feed and fiber production in almost all the agricultural regions of the world. The various biophysical, physiological, genetic, agronomic and ecological aspects of plant water relations have been thoroughly reviewed in recent years with the objective aimed at water availability as a constraint on crop production. This review will attempt a limited synthesis of these aspects, drawing mainly from research on drought resistance in grain crops, rice in particular, and emphasizing the progress- theoretical and practical- that could result from collaboration between physiologists, geneticists and plant breeders. A central theme will be research and development aimed at fitting crop plants to fluctuating drought prone environments. It is noteworthy that shortage of water restricts crop productivity all over the world-not just in those areas classified as arid or semiarid, but in any area in which the evaporative demand exceeds rainfall during the growing season. As such, the interaction between genotype and environment in situations has an important bearing affecting the physiology and also biochemistry at cellular level vis-à-vis the crop phenology. Cultivars with better ability to access soil water and improved water use efficiency could increase yields in an economic and environmentally sustainable way.

    1.    Cereals are grown over 73% of the total world harvested area and contribute over 60% of the world food production providing dietary fibre, proteins, energy, minerals,  vitamins, b-glucans , Oligosaccharides, such as lactulose, fructo-oligosaccharides, transgalacto-oligosaccharides

    2.    Finger millet is a potent source of antioxidants and has potent radical-scavenging activity that is higher than that of wheat, rice, and other millets; these results corresponded to their phenolic content

    3.    The brown or red variety of finger millet, which is commonly available, had higher activity (94%) than the white variety (4%) using the DPPH method.

    4.    Most of the herbal plant polyphenols are known to have multi functional properties such as reducing agents, hydrogen donating antioxidants and singlet oxygen quenchers and flavonoids and their derivatives are the largest and most important group of polyphenols.

    5.    Phytosterols are found in plant foods and are structurally and functionally analogous to cholesterol in vertebrate animals. a-sitosterol, campesterol and stigmasterol are the most commonly occurring phytosterols and constitute 95% of total phytosterols in the diet.

The use of natural dyes lost ground together with the old traditional dye methods towards the end of 19th century soon after the synthetic dyes came to the market (Gilbert and Cooke 2001). Only artisans, craftsmen, and green–minded companies continued dyeing with natural dyes (Hartl 1997). The first recorded synthetic dye is picric acid produced in 1770’s from the interaction of indigo and nitric acid. The synthetic dye industry is considered to have started when Perkins synthesised mauveine (mauve) in 1856 in the UK (Hancock 1997). With the passage of time, it was observed that synthetic dyes used by the textile industry are a source of environmental pollution (Seker et al. 2007) and they produce allergic, carcinogenic and detrimental effects on the health of humans (Singh and Singh 2002, Mahanta and Tiwari 2005). The synthetic dyes were preferred by the industry because of their simpilicity in the use and all colors could be produced easily, but the problem was the waste deposition which is a major cause of environmental pollution. The solvents used during dying reduce the problem to some extent but the waste water purification needs extra effort and money (Shreve and Brink 1985). As against this, the natural dyes are not only harmless to the humans but also cause far less environmental pollution, and have distinctive washing and sunlight fade–resistant characteristics (Mert et al. 1992, Angelini et al. 1997, Kim and Park 2006). For this purpose, the textile industries have started rethinking about the natural dyes and are trying to find sustainable as well as non–toxic alternatives to synthetic dyes for a growing textile market.

Abstract

Plant roots influence the biological, chemical and physical properties of rhizosphere soil. These effects are a consequence of their growth, their activity and the exudation of organic compounds from them. There is now considerable scope for the new ideas to be extended to the rhizosphere. The role of soil microorganisms in sustainable productivity has been well construed. In recent years, root inhabiting (rhizozosphere) bacteria (rhizobacteria) is gaining importance. The beneficial effects of plant growth promoting rhizobacteria (PGPR) has been variously attributed to their ability in improving the crop production, protection against phytopathogens, soil health and environmental quality. However, there is a need for isolation, identification and improvement of potent PGPR’s to utilize them ultimately as promising bio-inoculants. This review embodies some recent developments to evolve strategies for the better biotechnological exploitation of PGPR’s.

Abstract

Surveys made systematically in different remote places of Tamil Nadu brought to light more than 1000 indigenous techniques adopted for pest control in various crops of agriculture, horticulture and store grains. Target animals included array of insect species and animal pests namely rodents, mites, molluscs and microbes like nematodes and viruses. Various kinds of plant species reveal their modes of action distinctly.

Genus : Citrus
Species : Sinensis aurantium, limon, medica grandis L. paradisi Macf. reticulata Blanco
Family : Rutaceae
Chromosome No. : 2n = 18

Citrus is one of the most important and popular fruit of the world which is widely cultivated in almost all of the tropical and subtropical parts of the world. Amongst the subtropical fruits in respect of average it occupies the third position. In India too it is next to mango and banana in commercial perpective. Citrus fruits on account of extensive adaptability are successfully cultivated in tropical, subtropical and even in the marginal temperate regions where the condition are somewhat favourable with its attractive appearance (foliage) distinct flavour and above all its excellent fruit quantity, citrus is liked by one and all. Fruits are not only refreshing and delicious but are also very rich in vitamin C and is good source of A and B, with fruit sugar acids, minerals like Ca, P, Fe. They are essential and play significant role in health promoting constituents in human diet, significance of citrus fruits in diet is very well established. Limes and lemons

Nitrate – Nitrite Poisoning
Sources

Accidental ingestion/grazing of
Plants which are Nitrate accumulators

Introduction

The word mycotoxin is derived from myco, meaning mold and toxin, a poison. A great number of mold metabolites have been identified as mycotoxins. Thus mycotoxins are secondary fungal metabolites (i.e., metabolites not essential to the normal growth and reproduction of the fungus) which cause pathologic, physiologic, and/or biochemical lesions in other species (may include animals, plants, other microbes, etc.).

Mycotoxicosis - Poisoning of a biological system by a mycotoxin.

Mycotoxins  are  defined as toxic metabolites released by moulds under certain conditions conducive for their growth. Acute or chronic toxicoses can result from exposure to feed or bedding contaminated with toxins that may be produced during growth of various saprophytic or phytopathogenic fungi or molds on cereals, hay, straw, pastures, or any other fodder. A few principles characterize mycotoxic diseases:

Synonyms: Hydrophobia, Lyssa, Jalatanka

This is an acute highly fatal viral disease of all warm blooded animals including man characterized by signs of abnormal behaviour, nervous symptoms (increased excitability and irritability), impairment of consciousness ascending paralysis and death. The disease was variously known as lytta or lyssa coming from the belief that the disease was caused by a worm under the tongue (lytta) or hydrophobia, which describes the thirst and fear of water associated with the disease. The English name rabies derived from Latin word ‘Rabere’ which has been derived from Sanskrit word ‘Rabhas’ meaning raging, furious, savage, madness or to do violence whereas Greek term hydrophobia is now specifically used for rabies in man. The symptom hydrophobia (fear of water) is developed due to painful spasm of muscles of deglutition.

Distribution: The disease is known since ancient time. The disease has been recorded in various parts of the world in different species of animals. Australia, Britain, Scandinavian, New Zealand, Singapore, Hong Kong, Hawaii and some other Islands are free from rabies. This was possible due to strict quarantine measures and restriction on import of animal and animal products from disease prone areas. Lot of outbreaks are reported in India throughout the year causing 30,000 death annually and number of death toll may be higher as many cases go unnoticed. India accounts for the 80% casualties from rabies worldwide.

SUMMARY

Fertigation is the injection of concentrated soluble nutrients into irrigation water to enhance crop production. It is used extensively in commercial agriculture and horticulture. In combination with micro-irrigation (drip irrigation), this technique forms an efficient method for precisely applying nutrients close to the crop root zone, especially when a polyethylene mulch is used. Fertigation is used to spoon feed additional nutrients or correct nutrient deficiencies detected in plant tissue analysis and usually practiced with high value crops such as vegetables, turf, fruit trees, and ornamentals. Water supply for fertigation kept separate from domestic water supply to avoid contamination. Fertilizing fruit and vegetable crops requires a delicate balance between yield, quality, and environmental impact. Fertigation increases response to nitrogen (N) and provides greater opportunity to control rates to optimum levels to the root zone. Providing nutrients through the irrigation system enables more flexibility in a fertilizer program. Several types of irrigation systems are available for use in crop production. For any system used, approved backflow control valves and interlock devices are necessary to prevent accidental contamination of the water source due to irrigation system failure or shutdown.

1. Introduction

At present there is an increasing demand for colourants from natural sources. Since there is a possibility of banning of synthetic colours in view of their carcinogenic properties and already a reduction in number of permitted synthetic colours from 13 to 8 numbers in our legislation (PFA, 2005), the demand for natural colours is evident. In Japan and European countries because of the green movement, the demand for synthetic colours has been reduced. Synthetic colours in global market account for 400 million dollars. Despite processing limitations and higher costs, the global market for natural colours is estimated to be more than 939 million dollars (Espszezola, 1998). Color is recognized as a major factor affecting food acceptance. The consumer expects a specific food to possess a well defined colour and rejects any appreciable deviation from the normal. The change in colour during the preparation of food is a useful guide to quality control and is used by many food processors as the criterion for selecting raw materials. The characteristic colour of raw food is due to the natural pigments present in the plant and animal material. These can be enhanced in processed food products through the addition of food colourants. Addition of colour can make up for the colour losses during processing. Some of the major groups of colours are anthocyanins, carotenoids, betalains, chlorophylls, flavones and chalcones. Some of the plant sources of pigments are kokum, roscelle, chilli, marigold, beetroot, grapes and safflower. Sources of natural colours can be plants, animals or microbes. Fruits and vegetables form one of the main plant sources of pigments. Some of the plant materials rich in colours viz., alfalfa, marigold, safflower, strawberry, aronia fruits, grapes, red cherries have been exploited for pigment extraction and the results have shown positive effects. Some of the interesting features of the work carried out by researchers in this area are presented in the following sections.

Membrane technology is a proven separation method used on the molecular and ionic levels. Since the beginning of the 1970s, this technique has been adopted by the dairy industry. Membrane separation is widely used in dairy processing plants to perform an ever-increasing range of duties, e.g. pre-concentration, partial demineralization, protein separation, bacteria removal, brine clarification and waste water recycling. Representing one of the great technological developments occurring within the dairy industry during the second half of the twentieth century, progress was driven initially by the transfer of know-how gleaned from the application of cellulose acetate-based reverse osmosis (RO) and ultrafiltration (UF) membranes in other industrial sectors to whey processing. Later, new membrane materials and engineering designs were built on this initial achievement and opened up further opportunities for the application of the full spectrum of membrane separation systems that also includes Nan filtration (NF) and cross-flow microfiltration The integration of these unit operations into traditional dairy processes has led to the development of innovative ingredients as well as improvements in yield, efficiency and product quality. R & D work indicates potential RO application for concentration of milk for products like khoa, condensed and dried milk products and of UF application for the manufacture of shrikhand, paneer, chana and cheese. Application of these processes permits higher energy saving, higher yields and superior product quality compared to traditional processes of thermal evaporation.

Milk may be concentrated as a necessary initial step in drying operation or as concentrating step in the manufacture of sweetened condensed milk or evaporated milk or the preparation of infant formulae. In order to preserve the milk constituents in a concentrated form, condensed milk/concentrated milk is manufactured from whole skim milk by removing or evaporating part of the water under vacuum. But this form of milk still has limited shelf life. Attempts to prolong the shelf life of this product have been made through the addition of bacterial growth inhibitor like sugar (sweetened condensed milk) or by heat processing (evaporated milk) to destroy the microorganisms.

Concentrated milk industry is an important segment of dairy industry. It plays an important role in the economy of industry. It serves as a balanced economy. It utilizes surplus milk in the flush season. It utilizes abundant milk production in certain localized area. It makes use of surplus milk below excellent grade. By either concentrating or drying less space is needed to store and it becomes less bulky and therefore it can be transported to any part of the world. The keeping quality of milk is increased. The concentrated products give considerable saving in the cost of packaging, storage and transportation. Milk concentrates can be easily reconstituted with required amount of water corresponding to that removed by evaporation to yield a product having normal consistency of milk. It is estimated that nearly two per cent of the world’s milk production is converted into different types of condensed or concentrated milks.

Brief history and developments: The present day concept of preservation of milk by concentration and by application of heat had the beginning with the pioneering work of French man Nicholas Appert around 1793. Gail Bordon of USA was first to commercially exploit the method of concentration of milk under vacuum. He was awarded U.S. Patent in the year 1856 for processing milk in a semi-fluid state after evaporating under vacuum. Commercial production of sweetened condensed milk by Gail Bordon started in 1856.

1.    What is Surimi?
    
2.    Fisheries Resources for Surimi Production

    
3.    Historical Perspective of the Surimi Industry
    
4.    Present World Scenario of Surimi Industry

5.    Surimi Industry in India
    
6.    Processing Technology for Surimi from Light Muscle Fish 
    6.1     Types of fish used for surimi
    6.2     Heading, gutting, and deboning
    6.3     Mincing
    6.4     Washing and dewatering
    6.5     Stabilizing surimi with cryoprotectants
    6.6      Rapid freezing and packaging
    
7.    Surimi Processing from Dark Muscle Fish
    
8.    Quality Evaluation of Surimi
    
9.    Microbial Quality of Surimi
    
10.    Surimi based Products
    10.1     Fish cakes
    10.2     Fish balls
    10.3     Crab analogs (Crab leg meat analog)
    
11.    Scallop Analogs
    
12.    Moulded Products
    
13.    Important Considerations in Surimi and Surimi based Products
    13.1    Gelation
    
14.    Functional Properties of Surimi

15.    Cryoprotectants in Surimi
    15.1    Mechanism of action of cryoprotectants
    
16.    Future Development in Fish Protein Stabilization
    
References

1. Introduction

Afghanistan imperiled by decades of war, is  now a country on the rebound. With the days of relative peace up on the Afghan people, resources are being gathered and projects put onto place, in an effort to revitalize the previously stagnant economy. The rehabilitation of the agricultural economy in Afghanistan depends to a large extent on whether Afghanistan’s Agricultural Sector will be able to recover from the effects of war, serious consecutive droughts and a multitude of endemic crop/ livestock diseases. Afghanistan is a pastoral country with more than 85 per cent of the land area incapable of growing even a narrow range of crops, thus being largely rangeland.  Agriculture produces food, provides food security, enhances crop production, generates cash incomes for rural and urban populations, provides fuel and transport, and produces value added goods which can have multiplier effects and creates a need for services.  Furthermore, agricultural diversity production and income provide year-round employment, and spread risk. Livestock also form a major capital reserve of farming households.

1. Country Background

Mozambique is a country that is extremely dependent on agriculture, both for rural livelihoods and for overall economic growth. This importance is illustrated by the following:
    •    The agriculture sector accounts for about 20  per cent of GDP1.
    •    80  per cent of total employment and higher in rural areas.
    •    55  per cent of household incomes (national average) adding self-consumption and income from selling agricultural products2.
    •    40  per cent of export earnings (2003).
    •    The economy is not diversified and the average level of education is low, with few options for finding non-farm employment and incomes in rural zones.

1. Basic Information

Philippines  is located between 4o23’N and 21o25’N latitude, and between 116oE and 127oE longitude. It is an archipelago of 7,107 islands with three major groups of islands: Luzon, Visayas and Mindanao. It is bounded by the Bashi Channel up north, Sulu and Celebes Seas in the south, the Pacific Ocean to its east, and the South China Sea to its west. The Philippines has a tropical climate with an average temperature range of 23° to 32°C. Populated by 88 million people, the country has a total land area of 3,00,000 square kilometers  (30 million hectares); where about one third is agricultural land (NSO, 2007).

Of the agricultural land, 31 per cent is used for cereals such as corn and rice, 52 per cent for food crops and 17 per cent for non-food crops (ITC, 2007). Majority of these are cultivated on small farms averaging about two hectares and are managed by single families ranging from subsistence to commercial production (NSCB, 2007).

Abstract: North East India has a fragile inaccessible terrain with a sloping topography wherein agroforestry being diversified in nature, has the capability to eliminate the ill effects of land degradation through intensification in land use. Shifting cultivation widely practiced by the aboriginals is mainly instrumental in carrying out deforestation as well as land degradation but many indigenous  land use systems present in practice since time immemorial are proven considering an approach to achieve eco-sustainability. A number of agroforestry systems such as  agrihortisilviculture, multistoried  homegradens, silvipastoral and agroaquaculture etc are dominantly present in the region.The information on soil fertility improvement by agroforestry systems is documented herein. Organic matter build-up was appreciably high in soils of agroforestry. Similar to soils under shifting cultivation, a low humification of soil humus was noted in soils of uplands without any forest cover but a reverse trend leading to high rate of humification could be initiated in soils under agroforestry systems. Moreover, decline in soil acidity, rise in water holding capacity and augmentation in nutrient  availability were noted in soils under agroforestry systems.

A microarray, as the name suggests, is a two dimensional array of microscopic probes which captures certain molecules in an environment by a process known as hybridization, and are used to detect quantities of these molecules in the environment. The probes can vary according to requirement of experiment, and so can the environment, which in technical terms is an extract of tissue under study.